Comparing Result Set Values Of 2 Queries ??
Apr 20, 2004
Any assistance would be so helpful !!
We have 2 tables.. lets call them INV and COST
Table INV and COST have 3 related columns, namely ID,AMOUNT and VAT. As shown below...
ID | AMOUNT | VAT ( INV TABLE )
1 |20.125 |2.896
2 |10.524 |1.425
ID | AMOUNT | VAT ( COST TABLE )
1 |20.125 |4.821 .... different to ID 1 in INV Table
2 |10.524 |1.425
If you look above, I need to sum the AMOUNT and VAT columns and get a value for each ID, then compare the two tables and get the ID's that have different values...in this case I would need a result saying ID1 as the total of INV TABLE ID1 (23.021) is different to the corresponding ID1 row in COST TABLE (24.946)
Thats it ???
Please could someone out there offer some ideas ?
THANKS
JON
View 4 Replies
ADVERTISEMENT
Apr 20, 2004
Any assistance would be so helpful !!
We have 2 tables.. lets call them INV and COST
Table INV and COST have 3 related columns, namely ID,AMOUNT and VAT. As shown below...
ID | AMOUNT | VAT ( INV TABLE )
1 |20.125 |2.896
2 |10.524 |1.425
ID | AMOUNT | VAT ( COST TABLE )
1 |20.125 |4.821 .... different to ID 1 in INV Table
2 |10.524 |1.425
If you look above, I need to sum the AMOUNT and VAT columns and get a value for each ID, then compare the two tables and get the ID's that have different values...in this case I would need a result saying ID1 as the total of INV TABLE ID1 (23.021) is different to the corresponding ID1 row in COST TABLE (24.946)
Thats it ???
Please could someone out there offer some ideas ?
THANKS
JON
View 1 Replies
View Related
Apr 20, 2004
Any assistance would be so helpful !!
We have 2 tables.. lets call them INV and COST
Table INV and COST have 3 related columns, namely ID,AMOUNT and VAT. As shown below...
ID | AMOUNT | VAT ( INV TABLE )
1 |20.125 |2.896
2 |10.524 |1.425
ID | AMOUNT | VAT ( COST TABLE )
1 |20.125 |4.821 .... different to ID 1 in INV Table
2 |10.524 |1.425
If you look above, I need to sum the AMOUNT and VAT columns and get a value for each ID, then compare the two tables and get the ID's that have different values...in this case I would need a result saying ID1 as the total of INV TABLE ID1 (23.021) is different to the corresponding ID1 row in COST TABLE (24.946)
Thats it ???
Please could someone out there offer some ideas ?
THANKS
JON
View 4 Replies
View Related
Jun 4, 2007
Hello all,
I am trying to think my way through a solution which I believe others have probably come across... I am trying to implement a matching routine wherein I need to match an address against a high value and a low value (or, for that matter an input date vs. a start and end date) to return the desired row ... i.e. if I were to use a straight vb program I would just use the following lookup:
"SELECT DISTINCT fire_id, police_ID, fire_opt_in_out, police_opt_in_out FROM ipt_tbl " & _
" WHERE zip_code = @zip_code AND addr_prim_lo <= @street_number AND addr_prim_hi >= @street_number " & _
" AND addr_prim_oe = @addr_prim_oe AND street_pre = @street_pre AND street_name = @street_name " & _
" AND street_suff = @street_suff AND street_post = @street_post " & _
" AND (expiry_date = '' OR expiry_date = '00000000' OR expiry_date > @expiry_date)" & _
" GROUP BY fire_ID, police_ID, fire_opt_in_out, police_opt_in_out"
My question, then, is how would you perform this type of query using a lookup / merge join or script? I have not found a way to implement a way to set the input columns? I can set the straight matches without a problem, i.e. lookup zip code = input zip code, but can't think of the correct way to set comparisons, i.e. lookup value 1 <= input value AND lookup value 2 >= input value
Any suggestions?
thanks for your time...
View 5 Replies
View Related
Jul 20, 2005
Hello all... I'm stuck, I cannot figure out how I should go about flaggingconflicts on a sheduling app. I currently have 8 columns (school grades)that have class over the course of 9 periods. I am populating the asp pagefine, and making changes to the database with forms lists. I need to compareall the results of one period (thats 8 results) so that i may find aclassroom conflict. Is there any solution in SQL?This is my query:sql = "SELECT * FROM schedule WHERE period ='"&num&"'"I step through this 9 times in a for/next loopThanks in advance!Alpay Eno
View 1 Replies
View Related
Aug 2, 2007
I am trying to code a WHERE xxxx IN ('aaa','bbb','ccc') requirement but it the return values for the IN keyword changes according to another column, thus the need for a CASE function.
WHERE GROUP.GROUP_ID = 2 AND DEPT.DEPT_ID = 'D' AND WORK_TYPE_ID IN ( CASE DEPT_ID WHEN 'D' THEN 'A','B','C' <---- ERROR WHEN 'F' THEN 'C','D ELSE 'A','B','C','D' END )
I kept on getting errors, like
Msg 156, Level 15, State 1, Line 44Incorrect syntax near the keyword 'WHERE'.
which leads me to assume that the CASE ... WHEN ... THEN statement does not allow mutiple values for result expression. Is there a way to get the SQL above to work or code the same logic in a different manner in just one simple SQL, and not a procedure or T-SQL script.
View 3 Replies
View Related
Sep 26, 2006
I wrote 2 sql queries in two different ways.
The only difference in both queries are One using '=' and other one using 'in'.
All the other data is same.In my sense '=' and 'in' same
Both queries should give same result.
But one query giving different result and other query giving different result.
Is this 2 queries different??
SELECT sum(SALES_ITEM.NET_PRICE)
FROM PRODUCT_GROUP_LINK,
PRODUCT,
SALES_ITEM
WHERE (PRODUCT_GROUP_LINK.PRODUCT_CODE=PRODUCT.PRODUCT_CODE)
AND (PRODUCT_GROUP_LINK.PRODUCT_CODE=SALES_ITEM.ORIG_PRODUCT)
AND PRODUCT.STYLE_CODE='MC001'
AND (SALES_ITEM.PRICE_LIST='1FAC'
OR SALES_ITEM.PRICE_LIST='1FAW' )
AND CLASS_CODE='TYPE'
group by STYLE_CODE
SELECT sum(sales_item.net_price)
from PRODUCT,
product_group_link,
SALES_ITEM
WHERE (PRODUCT_GROUP_LINK.PRODUCT_CODE=PRODUCT.PRODUCT_CODE)
AND (PRODUCT_GROUP_LINK.PRODUCT_CODE=SALES_ITEM.ORIG_PRODUCT)
AND PRODUCT.STYLE_CODE='MC001'
AND sales_item.PRICE_LIST IN ('1FAC','1FAW')
AND CLASS_CODE='TYPE'
group by style_code
Any idea?
Thanks
View 5 Replies
View Related
Jan 15, 2007
whats the best way to compare two row values and concatenate those two
For example
Table1
-------
Col1 Col2
----------
A 1
A 4
B 2
C 3
A 5
I need a query to return something like
"where (A=1 or A=4 or A=5) and (b=2) and (c=3)"
Thanks in advance
View 11 Replies
View Related
Feb 23, 2006
Hi All
I have 2 tables
dbo.aus
dbo.us
aus has column ausid
us has column usersid
how do i ran a query to filter out all matching values in the 2 tables
basically i want a list of values that are the same in both tables
thanks
View 3 Replies
View Related
Nov 2, 2006
I have two tables with the same structure / different data. I run a query between the tables to find the different records for the out put. When the values of the records or NULL, I do not get the output.
Code:
SELECT dbo.Closest3StoresB_RBT.CustomerPost, dbo.Closest3StoresB_RBT.ClosestStore1,
dbo.Closest3StoresB_RBT.ClosestStore2,
dbo.Closest3StoresB_RBT.ClosestStore3
FROM dbo.Closest3StoresB_RBT INNER JOIN
dbo.Closest3StoresB_OLD_RBT ON dbo.Closest3StoresB_OLD_RBT.CustomerPost =
dbo.Closest3StoresB_RBT.CustomerPost
WHERE
(dbo.Closest3StoresB_OLD_RBT.ClosestStore1 <> dbo.Closest3StoresB_RBT.ClosestStore1) OR
(dbo.Closest3StoresB_OLD_RBT.ClosestStore2 <> dbo.Closest3StoresB_RBT.ClosestStore2) OR
(dbo.Closest3StoresB_OLD_RBT.ClosestStore3 <> dbo.Closest3StoresB_RBT.ClosestStore3)
CustomerPost | ClosestStore1 | ClosestStore2 | ClosestStore3
I want to avoid seting the NULL values to '0' . Any suggestions?
View 3 Replies
View Related
May 1, 2014
I would like to compare some values in two columns which are in the same table. I want to check that there are no differences between the values if the ID is Test1 and Test2
Example table
IDValue1Value 2
TEST1HouseTango
TEST2HouseTango
with test as (
select * from ExampleTable where ID= 'TEST'
),
[Code] ....
View 4 Replies
View Related
Sep 10, 2007
Hi,
There are two tables in my Database, tb1 and tb2 which both have the same attribute ID. I would like to ensure that there is nothing in ID in tb1 which is not listed in ID in tb2, can anyone help?
Thanks for any info.
Albert.
View 10 Replies
View Related
Aug 25, 2005
I have a table called WorkItem. It models a chunk of work done duringa working day.It has two columns that I'm interested in:Start (smalldatetime) - the TIME the work block is begunDuration (int) - the duration in minutes of the work block.In another table called OvertimeRates I have information about ratemultipliers and a column that tells me the TIME that the ratemultiplier kicks in.e.g.OTRateBegins (smalldatetime)In terms of calculating whether a particular work block starts afterthe OTRateBegins, I could (I presume) do something like:If CONVERT(smalldatetime, Start, 108) > CONVERT(smalldatetime,OTRateBegins, 108)However, would I be better off using DATEPART functions to get the hourand minute parts of both the Start and OTRateBegins, and using theminstead? For some reason, (probably paranoia!), I am suspicious of theCONVERT function.Apologies for not posting DDL, but I felt that the situation didn'treally warrant it.ThanksEdward
View 6 Replies
View Related
Jun 18, 2008
I have 3 sql queries:ex:select * from table 1 where id = 2select * from table 1 where name = 'name'select * from table 1 where date = 'date' I want to combine these three queries into one stored procedure.I am not sure how to do this.i want to display some column data from these 3 queries on 3 table rows as:<td> colum1 </td><td> colum2 </td><td> colum3 </td>so my SP should return some datatable .any suggestiions
View 3 Replies
View Related
Apr 22, 2004
Hello guys,
MS SQL server 2000 behavies strange with big queries that involves relatively large number of tables:
If I just enumerate columns I want to receive, the result set is empty. Adding * to the column list without making any change to where clause seems to solve the problem but I guess it's not the best practice.
The most amazing is that this behavior is not stable, so I suppose there's something to deal with server itself, not the application.
Has anybody suffered this problem and what solution was adopted?
Thanks for any information you can provide.
View 5 Replies
View Related
May 4, 2015
Required Output
Country Category
Internet Sales Amount
Internet Order Count
[code]....
I need to perform a SQL kind of Cross join to get the Total Count as a column along side as there are .net code and json structures defined that expects output in a certain format.
View 2 Replies
View Related
May 8, 2001
Hi , I need to compare two date fields in two different tables.One of the field is varchar(8) and other is dateime.When there is a date in one field and NULL in other field , how do I compare these two vales?
View 4 Replies
View Related
Jun 29, 2012
I've been working with T-SQL in a MSSQL Server Management Studio (2005) for about a week now. I've been trying to convert some horribly written VB code from a MS Access DB over to SQL so it can be automated on a SQL backend.
Most of the learning process and coding has gone surprisingly well. The problem is with comparing some data to determine which one needs to be flagged.
Three tables to note in bold, with notable fields in italics below them:
EmployeeData
HRID (identity)
ResourceAllocation
ID (identity)
[Last Name] (linked to HRID)
Project
[Resource Start Date]
[Resource End Date]
[Percent Utilization]
tblHCvalues
RAID (linked to ResourceAllocation.ID)
a monthyear and quarteryear for every month and quarter from 2012-2014. IE january12, february12, 1q12, 2q13, etc...
And yes, there are probably a thousand ways to optimize that tblHCvalues, but I'll ask about that later. Just work with the structure I have
Here's how it works: Each employee's data and unique HRID is in the EmployeeData tableAn employee can be on one or multiple projects at any timeThose projects are stored per project in the ResourceAllocation table with a link to the Employee's HRID, and all the other information listed aboveEven though an employee might be on two projects, they can only count for headcount on one project.
We use rules that compare the percent of work being done on a project, and the start and end dates of the employee (resource) on that project to determine which project should be counted for Headcount. The code uses a cursor to go through each HRID, and then pull up all the ResourceAllocation records associated with it.Run the rules to determine which ResourceAllocation record counts toward headcountA stored procedure then runs that fills out the tblHCvalues in the way we want for the project we want
All of it works, except for the rules that compare the things, so that's what I want to focus on in this thread. How do I write these rules:
Here are the rules, and they should work for any number of multiple resource allocations for one employee:
Choose the ResourceAllocation with the greatest [Percent Utilization]If the top ResourceAllocations have equal [Percent Utilization], choose the ResourceAllocation with the earliest [Resource Start Date]If the [Percent Utilization] and the [Resource Start Date] are equal, choose the latest [Resource End Date]If all three fields are equal, choose the first ResourceAllocation (aka, screw it and pick one at random)
I'm sure I could use a bunch of IF statements to compare it all, but even that is complicated to think about. There has to be an easier way, right?
View 6 Replies
View Related
Apr 25, 2007
SELECTIndustry,
100.0 * SUM(CASE when ceoischairman = 'yes' then 1 else 0 end) / COUNT(DISTINCT CompID) AS [YesPercent],
100.0 * SUM(CASE when ceoischairman = 'no' then 1 else 0 end) / COUNT(DISTINCT CompID) AS [NoPercent]
FROMTCompanies
GROUP BYIndustry
ORDER BYIndustry
This code above is working as I need it but I need to insert some additional functionality. Thanks
I need to add something like this:
IF YesPercent > NoPercent
UPDATE tableX SET CEOIsChairman='Yes' WHERE Industry='<the industry value being evaluated>'
Else If NoPercent > YesPercent
UPDATE tableX SET CEOIsChairman='No' WHERE Industry='<the industry value being evaluated>'
Else
UPDATE tableX SET CEOIsChairman='Equal' WHERE Industry='<the industry value being evaluated>'
End
View 1 Replies
View Related
Feb 6, 2008
Im Working with stored procedure. How can i compare Columns with specific values. I want to get the greater values of those column and inserted it to other columns. i want something like these
CASE
WHEN a> b,c,d THEN a
WHEN b> a,c,d THEN b
WHEN c> a,b,d THEN c
WHEN d> a,d,c THEN d
is there any ways to implement this? i got an error..
thanks please help..
View 7 Replies
View Related
Apr 2, 2008
Hi,
I would be very grateful if someone could help me. I have very little SQL knowledge and would like a push in the right direction:
I have a application that receives GPS lattitude and longitude values. I was originally using file base system where I would load all the points from the file into memory and do the calculations in the software but I now would like to use SQL Server Express.
I have created the tables:
[Table 1] GPS Points:
id int Primary key
latitude real
longitude real
desc nvarchar(128)
[Table 2] GPS Locations (comprises of one or more GPS Points from [1] above) to form a boundary:
GPS Locations database structure is:
locationId int primary key
gpspoint1 int
gpspoint2 int
gpspoint3 int
gpspoint4 int
desc nvarchar(128)
Table 2 contains up to 4 gps points ids from table 1 and GpsPoints1-4 can be null.
I have created the tables and I have inserted GPS values into both tables.
My problem:
I am trying to compare the current Lat/Lon (which are passed into the SQL fuction as two real datatype value) and I want to return all Table 2 locationId's where the current Lat/Lon are withing GPSPoints1-4 area.
gpspoint1, gpspoint2, gpspoint3, gpspoint4 reference an id from Table 1. I am not sure how I can do this?
I have implemetned a SQL function that returns all points from Table 1 that are within the predefined radius of 1.5 miles from the current Lat/Lon values passed in.
select desc,latitude,longitude, acos(SIN( PI()* @LatDec /180 )*SIN( PI()*latitude/180 )
)+(cos(PI()* @LatDec /180)*COS( PI()*latitude/180) *COS(PI()*longitude/180-PI()* @LonDec /180)
)* 3963.191 AS distance
FROM GpsPoints
WHERE 1=1
AND 3963.191 * ACOS( (SIN(PI()* @LatDec /180)*SIN(PI() * latitude/180)) +
(COS(PI()* @LatDec /180)*cos(PI()*latitude/180)*COS(PI() * longitude/180-PI()* @LonDec /180))
) < = Radius
ORDER BY 3963.191 * ACOS(
(SIN(PI()* @LatDec /180)*SIN(PI()*latitude/180)) +
(COS(PI()* @LatDec /180)*cos(PI()*latitude/180)*COS(PI() * longitude/180-PI()* @LonDec /180))
)
where 3963.191 is earths radius in miles,
radius is 1.5,
@LatDec is the current latitude and
@LonDec is the current longitude
Uses a lot of Trig and (for me) is quite complicated. This works very well and is very accurate. It also only uses a single table. I want to be able to now look for the current position within a boundary of 3 or more positions from Table 1 and this is where I am struggling?
Also, any suggestions on how I could do this better would be very much appreciated?
I look forward to your reply and help.
Thank you in advanced.
View 2 Replies
View Related
Sep 28, 2006
Hi All.
I'm having some issues with what seems to be a simple update statement but is giving me grief when one or both of the columns I'm comparing are null. My statement (simplified) is as follows:-
UPDATE
TAB_A
SET
TAB_A.TRADCODE = TAB_B.TRADCODE
FROM
TADS_STAGE.DBO.UNCLBRAMDEPT TAB_B
JOIN
TADS.DBO.UNCLBRAMDEPT TAB_A
ON
TAB_B.BRANCODE = TAB_A.BRANCODE
AND
TAB_B.MERDCODE = TAB_A.MERDCODE
AND
(
TAB_B.TRADCODE <> TAB_A.TRADCODE
)
If either of the TRADCODE fields (or both) are null then the comparison fails to return the row to update. I've tried setting the ANSI_NULLS setting to off, this has no effect, presumably because it will only work when comparing a column to a variable or evaluating if the column is null itself.
I've considered using ISNULL, but if one of the columns happens to contain the value that I specify as the replacement value then the comparison will result true and not include the row.
I'd be grateful for any pointers!
Thanks in advance
View 4 Replies
View Related
Jun 8, 2007
Hello
I have two matrices. One contains sales data for the current year, the other prior year. Both matrices use different data sets
I'd like to compare the two - possibly by creating a third matrix that subtracts prior year from current year.
Any ideas? When I create a third matrix and substitute a formula like =sum(values, "Data source for matrix 1") - sum(values, "Data source for matrix 2"), the resultant matrix subtracts the grand total from the first matrix - not the individual "cell".
Any suggestions are appreciated.
Thanks
View 4 Replies
View Related
Mar 5, 2012
Customers order a product and enter in a source code (sourceCd). This sourceCd is tied to a marketing program. Idea being we can see that 100 customers ordered from this promo, 200 from this catalog, etc etc. The sourceCd that a customer enters is not always accurate so there is a magic process that adjusts this OrigSourceCd into a final SourceCd, that may or may not be the same.
I am trying to generate a result set of customer count by sales program based on both the original and final source code. Problem is, I have to do each query separately because in one, I have to join SourceCdKey to SourceCdKey to get the program associated with that SourceCd and in the other i have to join OrigSourceCdKey to SourceCdKey to get the program associated with the original sourceCd. There are some programs is one results set that are not in the other, and vice versa.
I'm trying to generate a list of that shows customer counts before and after for each program, some which may be null for one, but have counts for the other. I have tries creating 2 separating views and joining them but that doesn't work because it only returns the ones they have in common.
View 6 Replies
View Related
Jan 9, 2014
I would like to pull all the columns from a table where the date column is within 6 months from the max date (i.e. Jul, Aug, Sep, Oct, Nov, & Dec). In addition to that, I would like to pull another column -the summary column - from the same table where the date = max(date) (Dec only).
I have written 2 queries and they produce the correct data. However, I don't know how to combine them into one resultant table. I tried to do a left join and had difficulties dealing with the different where statements from the 2 queries..
Here is query #1:
select investor, full_date, month_end_summary, category, loan_count
from cust_table
where datediff(month,full_date,(select max(full_date) from cust_table)) < 6
group by investor, full_date, month_end_summary, category, loan_count
order by investor, full_date
Here is query #2:
select investor, full_date, month_end_summary
from cust_table
where datediff(month,full_date,(select max(full_date) from cust_table)) =0
order by investor, full_date
Can they be combined into one query to produce one result table??
View 3 Replies
View Related
Jun 16, 2014
How to resolve the below task
create table #temp ( idx int identity(1,1), col1 int, col2 int )
Here i want a flag success or fail on basis of below conditions.
I need to take all the col1 values and then i need to compare to each other.
if any difference found, i need to check difference more than 30, then it should raise the flag as "Failure".
if all the col1 values are ok , then we need to check Col2 values same as above.
--case 1
insert into #temp(col1,col2)
select 16522,18522
union all
select 16522,18522
union all
select 16582,18522
--select * from #temp
--truncate table #temp
Because of difference in col1 values . the value of flag should be fail.
--case 2
insert into #temp(col1,col2)
select 16522,18522
union all
select 16522,18522
union all
select 16522,17522
Here also the col1 is ok but col2 values have difference so it should be Fail.
Otherwise it should be success.
View 6 Replies
View Related
Jun 8, 2015
I have a table Tbl1 which has 7 columns.This table will be my base table.By using our current application version ,i'll be creating record for Client1. Col1 will have value that application will generate(id).Then i'll be creating Tbl2 with same columns.Then i'll be creating same record for Client1 again ,using our new application version .Col1 will have different (id)value.I would like to compare the rest of the columns if there is any discrepancy caused by new version(columns Col2 -Col7).If there are same ,don't show me anything.
View 9 Replies
View Related
Jul 17, 2015
I have a table of raw data with supplier names, and i need to join it to our supplier database and pull the supplier numbers.
The issue is that the raw data does not match our database entries for these suppliers; sometimes there are extra periods, commas, or abbreviations (i.e. FedEx, FederalExpress, FedEx, inc.) etc. I'm trying to create a query that will search for entries that are similar.
I tried setting a variable to be equal to the raw data field, and then using a LIKE '%@Variable%' to try and return anything that would contain it, but it didnt return any rows.
View 9 Replies
View Related
Oct 30, 2015
I need to compare two consecutive rows (if BEGDA of second row is 1 day greater than ENDDA of first row then I need to pick First row BEGDA and 2nd row ENDDA)
Input Table Data:
PERNRSUBTYBEGDAENDDA
1010429001/1/20081/15/2015
10104210001/1/200812/31/2008
10104210001/1/200912/31/2009
10104220001/1/20081/15/2008
10104220001/16/200812/31/2008
10104220001/1/200912/31/2009
10104230001/1/200812/31/2008
10104230001/1/200912/31/2009
10104230001/5/201012/31/9999
101042DDPP5/16/200712/31/2007
101042DDPP2/16/20075/15/2007
101042MAPP2/1/200712/31/2007
101042VISI3/1/200712/31/2007
Output should be like this:
PERNRSUBTYBEGDAENDDA
1010429001/1/20081/15/2015
10104210001/1/200812/31/2009
10104220001/1/200812/31/2009
10104230001/1/200812/31/2009
10104230001/5/201012/31/9999
101042DDPP2/16/200712/31/2007
101042MAPP2/1/200712/31/2007
101042VISI3/1/200712/31/2007
View 3 Replies
View Related
Mar 7, 2006
Hi AllStrange request I know, but could somebody give me pointers on how I can put3 queries into 1 'thing' and then get only the unique entries from this'thing'.To explain, I'm using Excel/VBA/ODBC to query an SQL DB. The 3 queriesthemselves aren't that complex and all return the same 2 fieldsets of stockcode and stock desc. Because these separate queries might bring back thesame stock code/description I need to amalgamate the data and then queryagain to bring out only distinct stock values, eg:Query 1 brings back:stock code stock descIVP Invoice PaperSTP Statement PaperKGC Keyboard Coveretc... etc...Query 2 brings back:stock code stock descIVP Invoice PaperBOB Back PackKGC Keyboard Coveretc... etc...Query 3 brings back:stock code stock descKGC Keyboard Cover3.5"D 3.5" Disksetc... etc...I need to produce 1 resultset that shows:stock code stock descIVP Invoice PaperBOB Back Pack3.5"D 3.5" DisksKGC Keyboard CoverSTP Statement Paperetc... etc...(all unique entries)I'm currently just bringing back the 3 query results in Excel, but I'd liketo be able to do the above.In light of I'm using Excel/VBA/ODBC on a PC, is it possible to do?ThanksRobbie
View 1 Replies
View Related
May 8, 2008
Hi Guys, I am experiencing weird results
SELECT DSNew, DTTM, RQDT
FROM dbo.Feb
INNER JOIN DMSEFL
ON ACTR = DSNew
where cast(DSNew as varchar(20)) = cast(ACTR As varchar(20))
If I run the above query I get zero recs back.
If I substitute a Value then I get the desired results (ie. where DSNew = '93235500') or if I enter (ACTR = '93235500') or if I put (where DSNew = '93235500' AND ACTR = '93235500')
Can anyone suggest a reason why this is happening. I know the records exist on both tables I ran the query in Acess and got the desired resutls.
Thank you,
Trudye
View 4 Replies
View Related
Oct 24, 2006
HiThe scenario:The price of products are determined by size.I have a Prices table that contains 3 columnsWidth Length and Price.User inputs their own width and length values as inWidth and inLength.It is unlikely that these values will exactly match existing lengths and widths in the price table.I need to take these User Input values and round them up to the nearest values found in the Prices table to pull the correct price.What is the most efficient way of achieving this?Thanks for your time.C# novice!
View 9 Replies
View Related
Jul 23, 2005
I have the following insert statement in place:Insert WPHPayments(constituentID, constituentName, campaignYear, fundID, fundDescription, dateAndTimeEntered, amount)Select gt.constituentID, gt.constituentName, gt.campaignYear, gt.fundID, gt.fundDescription, gt.dateAndTimeEntered, gt.amountFrom GTPROCENTERFUNDPAYMENTEXTRACT gt, WPHExtractWhere gt.constituentID = WPHExtract.wph_constIDI want to insert all of the values that are in the GTPROCENTERFUNDPAYMENTEXTRACT table that have the same constituentID that as the records in the WPHExtract table. Am I just missing something becasue the syntax is showing that everytihing is correct however there is nothing comming back in the result set. Thanks in advance everyone. Regards,RB
View 1 Replies
View Related
