whats the best way to compare two row values and concatenate those two
For example
Table1
-------
Col1 Col2
----------
A 1
A 4
B 2
C 3
A 5
I need a query to return something like
"where (A=1 or A=4 or A=5) and (b=2) and (c=3)"
Thanks in advance
Hello all,
I am trying to think my way through a solution which I believe others have probably come across... I am trying to implement a matching routine wherein I need to match an address against a high value and a low value (or, for that matter an input date vs. a start and end date) to return the desired row ... i.e. if I were to use a straight vb program I would just use the following lookup:
"SELECT DISTINCT fire_id, police_ID, fire_opt_in_out, police_opt_in_out FROM ipt_tbl " & _
" WHERE zip_code = @zip_code AND addr_prim_lo <= @street_number AND addr_prim_hi >= @street_number " & _
" AND addr_prim_oe = @addr_prim_oe AND street_pre = @street_pre AND street_name = @street_name " & _
" AND street_suff = @street_suff AND street_post = @street_post " & _
" AND (expiry_date = '' OR expiry_date = '00000000' OR expiry_date > @expiry_date)" & _
" GROUP BY fire_ID, police_ID, fire_opt_in_out, police_opt_in_out"
My question, then, is how would you perform this type of query using a lookup / merge join or script? I have not found a way to implement a way to set the input columns? I can set the straight matches without a problem, i.e. lookup zip code = input zip code, but can't think of the correct way to set comparisons, i.e. lookup value 1 <= input value AND lookup value 2 >= input value
Any suggestions?
thanks for your time...
Hi All
I have 2 tables
dbo.aus
dbo.us
aus has column ausid
us has column usersid
how do i ran a query to filter out all matching values in the 2 tables
basically i want a list of values that are the same in both tables
thanks
I have two tables with the same structure / different data. I run a query between the tables to find the different records for the out put. When the values of the records or NULL, I do not get the output.
Code:
SELECT dbo.Closest3StoresB_RBT.CustomerPost, dbo.Closest3StoresB_RBT.ClosestStore1,
dbo.Closest3StoresB_RBT.ClosestStore2,
dbo.Closest3StoresB_RBT.ClosestStore3
FROM dbo.Closest3StoresB_RBT INNER JOIN
dbo.Closest3StoresB_OLD_RBT ON dbo.Closest3StoresB_OLD_RBT.CustomerPost =
dbo.Closest3StoresB_RBT.CustomerPost
WHERE
(dbo.Closest3StoresB_OLD_RBT.ClosestStore1 <> dbo.Closest3StoresB_RBT.ClosestStore1) OR
(dbo.Closest3StoresB_OLD_RBT.ClosestStore2 <> dbo.Closest3StoresB_RBT.ClosestStore2) OR
(dbo.Closest3StoresB_OLD_RBT.ClosestStore3 <> dbo.Closest3StoresB_RBT.ClosestStore3)
CustomerPost | ClosestStore1 | ClosestStore2 | ClosestStore3
I want to avoid seting the NULL values to '0' . Any suggestions?
I would like to compare some values in two columns which are in the same table. I want to check that there are no differences between the values if the ID is Test1 and Test2
Example table
IDValue1Value 2
TEST1HouseTango
TEST2HouseTango
with test as (
select * from ExampleTable where ID= 'TEST'
),
[Code] ....
Hi,
There are two tables in my Database, tb1 and tb2 which both have the same attribute ID. I would like to ensure that there is nothing in ID in tb1 which is not listed in ID in tb2, can anyone help?
Thanks for any info.
Albert.
I have a table called WorkItem. It models a chunk of work done duringa working day.It has two columns that I'm interested in:Start (smalldatetime) - the TIME the work block is begunDuration (int) - the duration in minutes of the work block.In another table called OvertimeRates I have information about ratemultipliers and a column that tells me the TIME that the ratemultiplier kicks in.e.g.OTRateBegins (smalldatetime)In terms of calculating whether a particular work block starts afterthe OTRateBegins, I could (I presume) do something like:If CONVERT(smalldatetime, Start, 108) > CONVERT(smalldatetime,OTRateBegins, 108)However, would I be better off using DATEPART functions to get the hourand minute parts of both the Start and OTRateBegins, and using theminstead? For some reason, (probably paranoia!), I am suspicious of theCONVERT function.Apologies for not posting DDL, but I felt that the situation didn'treally warrant it.ThanksEdward
View 6 Replies View RelatedHi , I need to compare two date fields in two different tables.One of the field is varchar(8) and other is dateime.When there is a date in one field and NULL in other field , how do I compare these two vales?
View 4 Replies View RelatedI've been working with T-SQL in a MSSQL Server Management Studio (2005) for about a week now. I've been trying to convert some horribly written VB code from a MS Access DB over to SQL so it can be automated on a SQL backend.
Most of the learning process and coding has gone surprisingly well. The problem is with comparing some data to determine which one needs to be flagged.
Three tables to note in bold, with notable fields in italics below them:
EmployeeData
HRID (identity)
ResourceAllocation
ID (identity)
[Last Name] (linked to HRID)
Project
[Resource Start Date]
[Resource End Date]
[Percent Utilization]
tblHCvalues
RAID (linked to ResourceAllocation.ID)
a monthyear and quarteryear for every month and quarter from 2012-2014. IE january12, february12, 1q12, 2q13, etc...
And yes, there are probably a thousand ways to optimize that tblHCvalues, but I'll ask about that later. Just work with the structure I have
Here's how it works: Each employee's data and unique HRID is in the EmployeeData tableAn employee can be on one or multiple projects at any timeThose projects are stored per project in the ResourceAllocation table with a link to the Employee's HRID, and all the other information listed aboveEven though an employee might be on two projects, they can only count for headcount on one project.
We use rules that compare the percent of work being done on a project, and the start and end dates of the employee (resource) on that project to determine which project should be counted for Headcount. The code uses a cursor to go through each HRID, and then pull up all the ResourceAllocation records associated with it.Run the rules to determine which ResourceAllocation record counts toward headcountA stored procedure then runs that fills out the tblHCvalues in the way we want for the project we want
All of it works, except for the rules that compare the things, so that's what I want to focus on in this thread. How do I write these rules:
Here are the rules, and they should work for any number of multiple resource allocations for one employee:
Choose the ResourceAllocation with the greatest [Percent Utilization]If the top ResourceAllocations have equal [Percent Utilization], choose the ResourceAllocation with the earliest [Resource Start Date]If the [Percent Utilization] and the [Resource Start Date] are equal, choose the latest [Resource End Date]If all three fields are equal, choose the first ResourceAllocation (aka, screw it and pick one at random)
I'm sure I could use a bunch of IF statements to compare it all, but even that is complicated to think about. There has to be an easier way, right?
Any assistance would be so helpful !!
We have 2 tables.. lets call them INV and COST
Table INV and COST have 3 related columns, namely ID,AMOUNT and VAT. As shown below...
ID | AMOUNT | VAT ( INV TABLE )
1 |20.125 |2.896
2 |10.524 |1.425
ID | AMOUNT | VAT ( COST TABLE )
1 |20.125 |4.821 .... different to ID 1 in INV Table
2 |10.524 |1.425
If you look above, I need to sum the AMOUNT and VAT columns and get a value for each ID, then compare the two tables and get the ID's that have different values...in this case I would need a result saying ID1 as the total of INV TABLE ID1 (23.021) is different to the corresponding ID1 row in COST TABLE (24.946)
Thats it ???
Please could someone out there offer some ideas ?
THANKS
JON
Any assistance would be so helpful !!
We have 2 tables.. lets call them INV and COST
Table INV and COST have 3 related columns, namely ID,AMOUNT and VAT. As shown below...
ID | AMOUNT | VAT ( INV TABLE )
1 |20.125 |2.896
2 |10.524 |1.425
ID | AMOUNT | VAT ( COST TABLE )
1 |20.125 |4.821 .... different to ID 1 in INV Table
2 |10.524 |1.425
If you look above, I need to sum the AMOUNT and VAT columns and get a value for each ID, then compare the two tables and get the ID's that have different values...in this case I would need a result saying ID1 as the total of INV TABLE ID1 (23.021) is different to the corresponding ID1 row in COST TABLE (24.946)
Thats it ???
Please could someone out there offer some ideas ?
THANKS
JON
Any assistance would be so helpful !!
We have 2 tables.. lets call them INV and COST
Table INV and COST have 3 related columns, namely ID,AMOUNT and VAT. As shown below...
ID | AMOUNT | VAT ( INV TABLE )
1 |20.125 |2.896
2 |10.524 |1.425
ID | AMOUNT | VAT ( COST TABLE )
1 |20.125 |4.821 .... different to ID 1 in INV Table
2 |10.524 |1.425
If you look above, I need to sum the AMOUNT and VAT columns and get a value for each ID, then compare the two tables and get the ID's that have different values...in this case I would need a result saying ID1 as the total of INV TABLE ID1 (23.021) is different to the corresponding ID1 row in COST TABLE (24.946)
Thats it ???
Please could someone out there offer some ideas ?
THANKS
JON
SELECTIndustry,
100.0 * SUM(CASE when ceoischairman = 'yes' then 1 else 0 end) / COUNT(DISTINCT CompID) AS [YesPercent],
100.0 * SUM(CASE when ceoischairman = 'no' then 1 else 0 end) / COUNT(DISTINCT CompID) AS [NoPercent]
FROMTCompanies
GROUP BYIndustry
ORDER BYIndustry
This code above is working as I need it but I need to insert some additional functionality. Thanks
I need to add something like this:
IF YesPercent > NoPercent
UPDATE tableX SET CEOIsChairman='Yes' WHERE Industry='<the industry value being evaluated>'
Else If NoPercent > YesPercent
UPDATE tableX SET CEOIsChairman='No' WHERE Industry='<the industry value being evaluated>'
Else
UPDATE tableX SET CEOIsChairman='Equal' WHERE Industry='<the industry value being evaluated>'
End
Im Working with stored procedure. How can i compare Columns with specific values. I want to get the greater values of those column and inserted it to other columns. i want something like these
CASE
WHEN a> b,c,d THEN a
WHEN b> a,c,d THEN b
WHEN c> a,b,d THEN c
WHEN d> a,d,c THEN d
is there any ways to implement this? i got an error..
thanks please help..
Hi,
I would be very grateful if someone could help me. I have very little SQL knowledge and would like a push in the right direction:
I have a application that receives GPS lattitude and longitude values. I was originally using file base system where I would load all the points from the file into memory and do the calculations in the software but I now would like to use SQL Server Express.
I have created the tables:
[Table 1] GPS Points:
id int Primary key
latitude real
longitude real
desc nvarchar(128)
[Table 2] GPS Locations (comprises of one or more GPS Points from [1] above) to form a boundary:
GPS Locations database structure is:
locationId int primary key
gpspoint1 int
gpspoint2 int
gpspoint3 int
gpspoint4 int
desc nvarchar(128)
Table 2 contains up to 4 gps points ids from table 1 and GpsPoints1-4 can be null.
I have created the tables and I have inserted GPS values into both tables.
My problem:
I am trying to compare the current Lat/Lon (which are passed into the SQL fuction as two real datatype value) and I want to return all Table 2 locationId's where the current Lat/Lon are withing GPSPoints1-4 area.
gpspoint1, gpspoint2, gpspoint3, gpspoint4 reference an id from Table 1. I am not sure how I can do this?
I have implemetned a SQL function that returns all points from Table 1 that are within the predefined radius of 1.5 miles from the current Lat/Lon values passed in.
select desc,latitude,longitude, acos(SIN( PI()* @LatDec /180 )*SIN( PI()*latitude/180 )
)+(cos(PI()* @LatDec /180)*COS( PI()*latitude/180) *COS(PI()*longitude/180-PI()* @LonDec /180)
)* 3963.191 AS distance
FROM GpsPoints
WHERE 1=1
AND 3963.191 * ACOS( (SIN(PI()* @LatDec /180)*SIN(PI() * latitude/180)) +
(COS(PI()* @LatDec /180)*cos(PI()*latitude/180)*COS(PI() * longitude/180-PI()* @LonDec /180))
) < = Radius
ORDER BY 3963.191 * ACOS(
(SIN(PI()* @LatDec /180)*SIN(PI()*latitude/180)) +
(COS(PI()* @LatDec /180)*cos(PI()*latitude/180)*COS(PI() * longitude/180-PI()* @LonDec /180))
)
where 3963.191 is earths radius in miles,
radius is 1.5,
@LatDec is the current latitude and
@LonDec is the current longitude
Uses a lot of Trig and (for me) is quite complicated. This works very well and is very accurate. It also only uses a single table. I want to be able to now look for the current position within a boundary of 3 or more positions from Table 1 and this is where I am struggling?
Also, any suggestions on how I could do this better would be very much appreciated?
I look forward to your reply and help.
Thank you in advanced.
Hi All.
I'm having some issues with what seems to be a simple update statement but is giving me grief when one or both of the columns I'm comparing are null. My statement (simplified) is as follows:-
UPDATE
TAB_A
SET
TAB_A.TRADCODE = TAB_B.TRADCODE
FROM
TADS_STAGE.DBO.UNCLBRAMDEPT TAB_B
JOIN
TADS.DBO.UNCLBRAMDEPT TAB_A
ON
TAB_B.BRANCODE = TAB_A.BRANCODE
AND
TAB_B.MERDCODE = TAB_A.MERDCODE
AND
(
TAB_B.TRADCODE <> TAB_A.TRADCODE
)
If either of the TRADCODE fields (or both) are null then the comparison fails to return the row to update. I've tried setting the ANSI_NULLS setting to off, this has no effect, presumably because it will only work when comparing a column to a variable or evaluating if the column is null itself.
I've considered using ISNULL, but if one of the columns happens to contain the value that I specify as the replacement value then the comparison will result true and not include the row.
I'd be grateful for any pointers!
Thanks in advance
Hello
I have two matrices. One contains sales data for the current year, the other prior year. Both matrices use different data sets
I'd like to compare the two - possibly by creating a third matrix that subtracts prior year from current year.
Any ideas? When I create a third matrix and substitute a formula like =sum(values, "Data source for matrix 1") - sum(values, "Data source for matrix 2"), the resultant matrix subtracts the grand total from the first matrix - not the individual "cell".
Any suggestions are appreciated.
Thanks
How to resolve the below task
create table #temp ( idx int identity(1,1), col1 int, col2 int )
Here i want a flag success or fail on basis of below conditions.
I need to take all the col1 values and then i need to compare to each other.
if any difference found, i need to check difference more than 30, then it should raise the flag as "Failure".
if all the col1 values are ok , then we need to check Col2 values same as above.
--case 1
insert into #temp(col1,col2)
select 16522,18522
union all
select 16522,18522
union all
select 16582,18522
--select * from #temp
--truncate table #temp
Because of difference in col1 values . the value of flag should be fail.
--case 2
insert into #temp(col1,col2)
select 16522,18522
union all
select 16522,18522
union all
select 16522,17522
Here also the col1 is ok but col2 values have difference so it should be Fail.
Otherwise it should be success.
I have a table Tbl1 which has 7 columns.This table will be my base table.By using our current application version ,i'll be creating record for Client1. Col1 will have value that application will generate(id).Then i'll be creating Tbl2 with same columns.Then i'll be creating same record for Client1 again ,using our new application version .Col1 will have different (id)value.I would like to compare the rest of the columns if there is any discrepancy caused by new version(columns Col2 -Col7).If there are same ,don't show me anything.
View 9 Replies View RelatedI have a table of raw data with supplier names, and i need to join it to our supplier database and pull the supplier numbers.
The issue is that the raw data does not match our database entries for these suppliers; sometimes there are extra periods, commas, or abbreviations (i.e. FedEx, FederalExpress, FedEx, inc.) etc. I'm trying to create a query that will search for entries that are similar.
I tried setting a variable to be equal to the raw data field, and then using a LIKE '%@Variable%' to try and return anything that would contain it, but it didnt return any rows.
I need to compare two consecutive rows (if BEGDA of second row is 1 day greater than ENDDA of first row then I need to pick First row BEGDA and 2nd row ENDDA)
Input Table Data:
PERNRSUBTYBEGDAENDDA
1010429001/1/20081/15/2015
10104210001/1/200812/31/2008
10104210001/1/200912/31/2009
10104220001/1/20081/15/2008
10104220001/16/200812/31/2008
10104220001/1/200912/31/2009
10104230001/1/200812/31/2008
10104230001/1/200912/31/2009
10104230001/5/201012/31/9999
101042DDPP5/16/200712/31/2007
101042DDPP2/16/20075/15/2007
101042MAPP2/1/200712/31/2007
101042VISI3/1/200712/31/2007
Output should be like this:
PERNRSUBTYBEGDAENDDA
1010429001/1/20081/15/2015
10104210001/1/200812/31/2009
10104220001/1/200812/31/2009
10104230001/1/200812/31/2009
10104230001/5/201012/31/9999
101042DDPP2/16/200712/31/2007
101042MAPP2/1/200712/31/2007
101042VISI3/1/200712/31/2007
Hi Guys, I am experiencing weird results
SELECT DSNew, DTTM, RQDT
FROM dbo.Feb
INNER JOIN DMSEFL
ON ACTR = DSNew
where cast(DSNew as varchar(20)) = cast(ACTR As varchar(20))
If I run the above query I get zero recs back.
If I substitute a Value then I get the desired results (ie. where DSNew = '93235500') or if I enter (ACTR = '93235500') or if I put (where DSNew = '93235500' AND ACTR = '93235500')
Can anyone suggest a reason why this is happening. I know the records exist on both tables I ran the query in Acess and got the desired resutls.
Thank you,
Trudye
HiThe scenario:The price of products are determined by size.I have a Prices table that contains 3 columnsWidth Length and Price.User inputs their own width and length values as inWidth and inLength.It is unlikely that these values will exactly match existing lengths and widths in the price table.I need to take these User Input values and round them up to the nearest values found in the Prices table to pull the correct price.What is the most efficient way of achieving this?Thanks for your time.C# novice!
View 9 Replies View RelatedI have the following insert statement in place:Insert WPHPayments(constituentID, constituentName, campaignYear, fundID, fundDescription, dateAndTimeEntered, amount)Select gt.constituentID, gt.constituentName, gt.campaignYear, gt.fundID, gt.fundDescription, gt.dateAndTimeEntered, gt.amountFrom GTPROCENTERFUNDPAYMENTEXTRACT gt, WPHExtractWhere gt.constituentID = WPHExtract.wph_constIDI want to insert all of the values that are in the GTPROCENTERFUNDPAYMENTEXTRACT table that have the same constituentID that as the records in the WPHExtract table. Am I just missing something becasue the syntax is showing that everytihing is correct however there is nothing comming back in the result set. Thanks in advance everyone. Regards,RB
View 1 Replies View Relatedhow to write condition for self table year records, such 2012 name and acctno match with 2013 name and acctno then total, provided below,
create table #tab1 (MasterKey int, AcctNo varchar(12),name varchar(25), SumaofShares numeric, request_dat datetime )
--drop table #tab1
insert into #tab1 values (1000, 100,'Tom', 2500, '10/01/2012')
insert into #tab1 values (1001, 101,'Bat', 1550, '08/11/2012')
insert into #tab1 values (1002, 102,'Kit', 1600, '06/12/2012')
insert into #tab1 values (1003, 103,'Vat', 1750, '04/15/2012')
insert into #tab1 values (1010, 104,'Sim',200, '04/21/2013')
[code]....
i would like to get 4 columns output
how to get sumofshares (#tab1) and TotalOutStanding(#tab2) summ up with these values,
MasterKey (#tab1) and IssueKey (#tab2) are like primary key and foreign key
so the request is
need to calculate, sumofshares (#tab1) and TotalOutStanding(#tab2) as below
1)ShareBenefist = U and year( request_dat) in (2012 , 2103) and (Name for 2012 should match with 2013 name and 2012 Acctno should match with 2013 accounno) in (#tab1)
then '2012 and 2013 accts UN Veriverted'
2)ShareBenefist = V and year( request_dat) in (2012 , 2103) and (Name for 2012 should match with 2013 name and 2012 Acctno should match with 2013 accounno) in (#tab1)
then '2012 and 2013 accts Veriverted'
3)ShareBenefist = N and year( request_dat) in (2012 , 2103) and (Name for 2012 should match with 2013 name and 2012 Acctno should match with 2013 accounno) in (#tab1)
then '2012 and 2013 accts NONVERT'
4)year( request_dat) =2102 and Name and Acctno not match with 2013 account name and acctno (#tab1)
then '2012 last year accounts'
5)year( request_dat) = 2013 and Name and Acctno not match with 2013 account name and acctno (#tab1)
then '2012 This year accounts'
for ex 1) the below accounts in #tab1 has both 2012 and 2013 and acctno same in both years and name is same in both years so it is condired as
insert into #tab1 values (1012, 100,'Tom',800, '08/22/2013')
for ex 2)
insert into #tab1 values (1013, 101,'Bat',550, '09/15/2013')
for ex 4) 2012 records there is not match acctno and name in 2013 recods
insert into #tab1 values (1002, 102,'Kit', 1600, '06/12/2012')
for ex 5) 2013 records there is no match of name and acct no with 2012 records
insert into #tab1 values (1010, 104,'Sim',200, '04/21/2013')
insert into #tab1 values (1014, 100,'Pet',200, '02/21/2013')
insert into #tab1 values (1016, 110,'Sun',800, '03/22/2013')
insert into #tab1 values (1017, 111,'Bet',550, '12/15/2013')
Expected Results (just for format)
AcctTypeDescription,SumofShares, OtotalutStand
'2012 and 2013 accts UN Veriverted',2700,234
'2012 and 2013 accts Veriverted' ,2890,234
'2012 and 2013 accts NONVERT' ,4533,325
'2012 last year accounts' ,2334,567
'2012 This year accounts' ,2222,877
how best to approach a problem involving two tables across two different servers.
Table 1: Contains IP Address along with assessment findings. Lets say the fields are IPADDRESSSTR, FINDING
Table 2: Contains Subnet information stored in integer format. The fields are SITE_ID, LOW, and HIGH
What I'd like to do is load the IP range information into memory and then return the findings from table 1 where the IPADDRESSSTR is between the LOW and HIGH integer value.
1) Is there a way to load all of the ranges from table 2 into an array and then compare all the IP addresses (IPADDRESSSTR) from table 1?
2) How do I convert IPADDRESSSTR (a string) to an integer to perform the comparison.
I am trying to pull the records which are being affected i.e, comparing the values and if not same then populating the record.
I am using the below condition in where clause however i am getting runt time error as "Conversion failure when converting date and/or time from character string"
Condition in Where clause:
cast(isNull(tab1.Col1,'') as datetime) <> cast(isNull(tab2.col1,'') as datetime)
Note: Both col1 columns are of type nvarchar
Hello,
I am trying to retrieve the data that are not more than 3 months. How do I do this? The closest thing that I can do is...
(dbo.CLASSIFIEDADS.PostDate > CONVERT(DATETIME, '2006-03-26 00:00:00', 102))
I want to be able to put 3 months in there somehow...
Thanks in Advance!
Hi,
I have a table with 3 columns inside
- record_id (int)
- user_id (varchar)
- login_date (date)
it is a many-to-many relationship table that record login date of users
Now, I want if I want to COUNT the users who login before 31 May 2008, I would use
SELECT COUNT(*)
FROM table1
WHERE login_date < '2008-31-05'
That's works
But the problem is I want to split the result to
- How many people visit the site only once?
- How many people visit the site only twice?
- How many people visit the site three time?
How do I do that?
please help
Thank you
Hi,
I have a field in database money. When I enter value for it the amount entered is for example 20.000. How can I compare this value with noraml vaules i.e. like 20 in my search engine. Will I need to convert it to varchar and then compare it or is there some other way. Also if I need to convert it to varchar, how can I do it?
Thanks in advance,
Uday
hi ... please look at it :
<< The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator. >>
ok ... it was my error mess, but i just wrote this code :
***********************************************************
Dim conPubs As SqlConnection
Dim cmdSelect As SqlCommand
Dim strSelect As String
conPubs = New SqlConnection ("Server=localhost;uid=ggggg;pwd=uuuu;database=eeee")
strSelect = "Select username From userpass Where username = '" & usernametxt.Text & "' And password = '" & passtxt.Text & "'"
cmdSelect = New SqlCommand( strSelect, conPubs )
conPubs.Open()
if Not(cmdSelect.ExecuteScalar() IS Nothing) then 'findeduser.text
response.redirect("welcome.aspx")
conPubs.Close()
else
msg.text="ID or Pass is incorrect!!"
conPubs.Close()
end if
***********************************************************
what is wrong?
can you help me?
me : mhamini@gmail.com
I am wondering how I would create a SELECT that will select the most recent date from one of two tables. For example, table1 has a field called LastUpdate and table 2 has a field called LastUpdate. I need to grab only the most recent date. I tried this using an inner join...but that didn't work because it only picks the lastupdate form one table only. talbe1 and table2 are tied by table2.table1id.
Can anyone help?
Hi All,
I have a database field (datestamp) which returns the date the records were inserted into the database. The datestamp was created with the now(); function in .net and is in the following format: 5/23/2006 2:27:45 AM
I basically want to return all records that were inputted more than 28 days ago. I have had alook though some other posts and below is the closest query that i could find but unfortunately it does not work for me.
SELECT id, datestampFROM table WHERE datestamp > DateAdd(d, 28, GetDate())
Thanks in advance,
Jake