Comparing Two Strings Inside A Stored Procedure
Aug 14, 2006
Basically I have two strings. Both strings will contain similar data because the 2nd string is the first string after an update of the first string takes place. Both strings are returned in my Stored Procedure
For example:
String1 = "Here is some data. lets type some more data"
String2 = "Here's some data. Lets type some data here"
I would want to change string2 (inside my Stored Procedure) to show the changed/added text highlighted and the deleted text with a strike though.
So I would want string2 to look like this
string2 = "Here<font color = "#00FF00">'s</font> <strike>is</strike> some data. <font color = "#00FF00">L</font>ets type some <strike>more</strike> data <font color = "#00FF00">here</font>"
Is there an way to accomplish this inside a stored procedure?
View 2 Replies
ADVERTISEMENT
Nov 1, 2007
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
View 1 Replies
View Related
May 26, 2008
Just wonder whether is there any indicator or system parameters that can indicate whether stored procedure A is executed inside query analyzer or executed inside application itself so that if execution is done inside query analyzer then i can block it from being executed/retrieve sensitive data from it?
What i'm want to do is to block someone executing stored procedure using query analyzer and retrieve its sensitive results.
Stored procedure A has been granted execution for public user but inside application, it will prompt access denied message if particular user has no rights to use system although knew public user name and password. Because there is second layer of user validation inside system application.
However inside query analyzer, there is no way control execution of stored procedure A it as user knew the public user name and password.
Looking forward for replies from expert here. Thanks in advance.
Note: Hope my explaination here clearly describe my current problems.
View 4 Replies
View Related
Nov 5, 2015
Can I invoke stored procedure stored inside from a user defined table column?
View 5 Replies
View Related
Aug 20, 2007
Hi,
I have a strange problem I can't solve. I have a log table where a have for example a timecreated column where I store dates in the format 0704212112538707
What I want to to is to search for log posts that are in between two dates.
I have this SQL query: select * from log where timecreated >= '070421' and timecreated <= '070422'. With this question I only get hits from the date 070421. I would like to get both 070421 and 070422. I get no difference if I use < or <=.
How would I solve this
Best /M
View 4 Replies
View Related
Feb 24, 2008
HiI have a problem trying to compare a string value in a WHERE statement. Below is the sql statement. ALTER PROCEDURE dbo.StoredProcedure1(@oby char,@Area char,@Startrow INT,@Maxrow INT, @Minp INT,@Maxp INT,@Bed INT
)
ASSELECT * FROM
(
SELECT row_number() OVER (ORDER BY @oby DESC) AS rownum,Ref,Price,Area,Town,BedFROM [Houses] WHERE ([Price] >= @Minp) AND ([Price] <= @Maxp) AND ([Bed] >= @Bed) AND ([Area] = @Area)) AS AWHERE A.rownum BETWEEN (@Startrow) AND (@Startrow + @Maxrow) The problem is the Area variable if i enter it manually it works if i try and pass the variable in it doesn't work. If i change ([Area] = @Area) to ([Area] = 'The First Area') it is fine. The only problem i see is that the @Area has spaces, but i even tried passing 'The First Area' with the quotes and it still didnt work.Please help, its got to be something simple.Thanks In Advance
View 2 Replies
View Related
May 1, 2007
Hello, my first post :)
I'm currently working on a project that involves IP checking, here's my scenario:
A user enters an IP address of 10.174.55.65 let's say, I want to somehow be able to check and see if this IP address is in between column A (It's called ip) which consists the IP data of 10.174.0.0 and column B (It's called EndingIp) which has the IP data 10.174.255.255, so generally speaking I'm checking for the 3rd and 4th spots within the IP address and I'm trying to see if it's between the IP's in column A and B.
The thing is these are all strings, so how do I approch a stiuation like that within SQL?
Btw, I attached a picture of the table to be more clear.
Thanks in advance for the advice...
View 3 Replies
View Related
Dec 11, 2007
I have large stored procedures in SQL Server 2005 that often get updated. Sometimes it is very difficult to recognize how one change could impact the overall results. I would like to have some sample input that I could test during changes and see it compare the data results before & after my changes. This would help me quickly identify if the results are fine to pass through.
So basically I would like an easy way to compare the results of 2 stored procedures. Any suggestions or utilites that would help me do this?
View 3 Replies
View Related
Jun 10, 2007
Well, I managed to write a Stored procedure that updates some records in the Northwind Database based on the ProductIDs passed to the SP as a list of strings. This is the Alter version of the SP:USE [Northwind]
GO
/****** Object: StoredProcedure [dbo].[gv_sp_UpdatePOs] Script Date: 06/10/2007 12:07:54 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROC [dbo].[gv_sp_UpdatePOs]
(
@IDList varchar(500),
@ReorderLevel int,
@ProductName nvarchar(30)
)
AS
BEGIN
SET NOCOUNT ON
EXEC('Update dbo.Products
SET ReorderLevel = (' + @ReorderLevel + ') ,ProductName = (''' + @ProductName + ''')
WHERE ProductID IN (' + @IDList + ')')
END
----------------------
THis works fine inside Sql Server 2005 Query analyser.
But when I setup an aspx page with an objectDataSource inside the page attached to an xsd file where the Products table is located. When I try to add new query to the tableadapter inside the Products table and point to the stored procedure in the wizard I get this error: " the wizard detected the following problems when configuring TableAdapter query "Products" Details: Generated SELECT statement. Incorrect suntax near ')'.
Any help would be appreciated
And can someone convert it to support XML instead of list of strings. thanks.
View 3 Replies
View Related
Jul 11, 2001
Hi guys,
I'm trying to parse a character string in a stored procedure but I'm not sure how to do it. For example:
-------------------------------
create procedure sp_test (
@fld varchar(1000)
)
AS
???
???
.
.
.
.
----------------------------------
sp_test '123:abc,456:def,789:ghi'
I need to put 123 into a seperate local variable, abc into a local variable, and so on...
What would be the best function to use?
Any help would greatly be appreciated.
- Gary
View 1 Replies
View Related
May 11, 2006
Hello,
I need to compare movie names from two systems. In both systems these names are entered manually by operators. I would like to compare them and give a rating on how close these names are equal.
Stripping special characters, and spaces is just not enough. It can happen that they key in sligthly different names. I've tried to use soundex but as we have over 15000 movie titles over the years i'm getting to many equal soundexes to use this as a comparison key.
Any ideas if there are techniques to do this ...
Kind Regards
View 1 Replies
View Related
Dec 10, 2007
I have large stored procedures in SQL Server 2005 that often get updated. Sometimes it is very difficult to recognize how one change could impact the overall results. I would like to have some sample input that I could test during changes and see it compare the data results before & after my changes. This would help me quickly identify if the results are fine to pass through.
So basically I would like an easy way to compare the results of 2 stored procedures. Any suggestions or utilites that would help me do this?
View 6 Replies
View Related
Jun 16, 2007
Hi,
Do you know how to write stored procedures inside another stored procedure in MS SQL.
Create procedure spMyProc inputData varchar(50)
AS
----- some logical
procedure spMyProc inputInsideData varchar(10)
AS
--- some logical
--- go
-------
View 5 Replies
View Related
Aug 9, 2007
Hello,I have a sqlserver stored procedure that calls the stored procedure sp_send_cdosysmail_htm to send reminder emails to customers. I am experiencing problems when trying to concatenate the id being renewed in the subject field. I'm always getting the message "error 170: line 10: Incorrect syntax near '+'."Does anyone know what the error means or can point me to a resource on the web? Many thanksRitao CREATE PROCEDURE dbo.SendRenewalEmail @ID INT AS BEGIN exec dbo.sp_send_cdosysmail_htm @From = 'yosemite.sam@acme.com', @To = 'road.runner@acme.com', @Cc = null, @BCC = null, @Subject = 'Order ' + @ID + 'Renewal Reminder', @Body = 'Hello roadrunner....' ENDGO
View 4 Replies
View Related
Jan 19, 2007
hi all,
I want to know that how can i write a stored procedure that takes an input param, i.e., a string and returns the count of the matching words between the input parameter and the value of a column in a table. e.g. I have a table Person with a column address. now my stored procedure matches and counts the number of words that are common between the address of the person and the input param string. I am looking forward for any help in this matter. I am using Sql server 2005.
View 1 Replies
View Related
Mar 20, 2007
hi all,
i'm wondering if i can use one stored procedure in too cases, this is the senario:
i have stored procedure for admin and another one for user, they have the same select everything is the same except that in admin SP i have where @admin = admin and for user i have where @user = user
if there a way to use if and else to make this happen
this is what i did so far:
CREATE PROCEDURE [test] @admin INT, @user INT, @indexType INT as
if @indexType = 1
begin
SELECT * FROM table WHERE something IN (SELECT * FROM anothertable where admin = @admin)
end
else
begin
SELECT * FROM table WHERE user = @user
end
GO
any suggestion will be very helpful
thanks
View 2 Replies
View Related
Aug 5, 2006
I want to execute some insert statements within a stored procedure and commit those changes regardless of any raiseerror that occurs later in the stored procedure. My difficulty is that I am forced to use raiseerror with severity 16 in order to send a message through the powerbuilder application interface (compiled vendor code). I have tried save points but can't get that to save my insert and still present an error to the user about something else that happens later.
here is an example
BEGIN procedure
Insert something and save it even if error is raised below
RaiseError('you made a mistake and need to do this.',16,-1)
END procedure
View 5 Replies
View Related
Mar 31, 2008
Hi folks
I nead to call a stored procedure in a where statemene, but MSSQL dont like that.
My problem is that the StoredProcedure is calling itself recursive and therfore its impossible to add the code as a standard SELECT statement. Here is the code
ALTER PROCEDURE dbo.advsp_FilterRecordRights
@RequesterGUID Char(20),
@EntityGUID Char(20)
AS
BEGIN
if not Exists(Select *
from GUIDRightsH
where GUIDRightsH.EntityGUID = @EntityGUID and
GUIDRightsH.RequesterGUID = @RequesterGUID and
GUIDRightsH.RecProp <> 0)
Begin
Return 1
end
if not Exists(Select *
from UsergroupMembers
where UserGroupMembers.UsergroupGUID = @RequesterGUID and
dbo.advsp_FilterRecordRights(UserGroupMembers.UserGUID,@EntityGUID) = 1)
Begin
Return 1
end
Return 0
END
View 3 Replies
View Related
Mar 13, 2007
Good morning everybody,
I'm here once again asking for help. Here's my problem:
I have a table that I use in my text mining clustering third-party algorithm. The table is as follows:
ID: primary key (int)
ID_DOC: an ID I use to know from what document a term came from (int)
ID_TERMO: the term ID (int)
TERMO: the term itself (varchar(max))
FREQ: the term frequency, usually TFxIDF (real)
Alright... I need the term itself to do some visualization. What I want to do is to get each case's term and store'em on a vector<char*>. So I did some changes on the ProcessCase method. In this method the data (each variable of the case) can be accessed rolling over the case using a DM_STATE_VALUE* as follows:
DM_STATE_VALUE* xpto = (DM_STATE_VALUE*) rgValue;
for(unsigned int i=0;i<_cAttribute;i++) { // _cAttribute is the number of variables
double aux = xpto.r8;
//Do some calculation using aux
}
Alright... It works quite well when I only have real and int data types on the database. But how the get the term collumn (varchar(max)) ?
How to modify the DM_STATE_VALUE union to accept strings as well ?
Any clues are wellcome.
Thanks a lot once more,
-Renan
View 4 Replies
View Related
May 18, 2007
This example is working:
Declare @startRowIndex INT; set @startRowIndex = (@PagerIndex * @ShowMembers); With BattleMembers as ( SELECT TOP 20 ROW_NUMBER() OVER (ORDER BY LastActivityDate DESC) AS Row, UserId, UserName FROM aspnet_Users) SELECT UserId, UserName FROM BattleMembers WHERE Row between @startRowIndex and @startRowIndex+@ShowMembersEND
and this one doesn't work:USE [xx]GOSET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGOALTER PROCEDURE [dbo].[battle_Paging]@PagerIndex INT,@ShowMembers INT ASBEGINDeclare @startRowIndex INT; set @startRowIndex = (@PagerIndex * @ShowMembers); With BattleMembers as ( SELECT TOP 20 ROW_NUMBER() OVER (ORDER BY aspnet_Users.LastActivityDate DESC) AS Row, aspnet_Users.UserId, aspnet_Users.UserName, mb_personal.Avatar FROM aspnet_Users LEFT JOIN mb_personal ON (mb_personal.UserID=aspnet_Users.UserId) SELECT UserId, UserName, Avatar FROM BattleMembers WHERE Row between @startRowIndex and @startRowIndex+@ShowMembersEND
Error:Msg 156, Level 15, State 1, Procedure battle_Paging, Line 18Incorrect syntax near the keyword 'SELECT'.
I try to join in the table mb_personal here. Some help would be very appreciated! Thanks.
View 2 Replies
View Related
Oct 26, 2007
Hello, I have a situation that I query a table and return multiple rows (email addresses). I want to iterate through the rows and concatenate all email addresses into one string (will be passing this to another stored procedure to send mail). How can I process result rows inside a stored procedure? This is what I have so far: CREATE PROCEDURE [dbo].[lm_emailComment_OnInsert] @serviceDetailID int,@comment varchar(500),@commentDate DateTime,@commentAuthor varchar(100)ASBEGINDECLARE @serviceID intDECLARE @p_recipients varchar(8000)DECLARE @p_message varchar(8000)DECLARE @p_subject varchar(100)/* Grab the Service_id from underlying Service_Detail_id*/SELECT @serviceID = Service_id FROM lm_Service_Detail WHERE Service_Detail_id = @serviceDetailID/* Get email addresses of Service Responsible Parties */
SELECT DISTINCT dbo.lm_Responsible_Party.EmailFROM dbo.lm_Service_Detail INNER JOIN
dbo.lm_Service_Filing_Type ON dbo.lm_Service_Detail.Service_id = dbo.lm_Service_Filing_Type.Service_id INNER JOIN
dbo.lm_Responsible_Party_Filing_Type ON dbo.lm_Service_Filing_Type.Filing_Type_id = dbo.lm_Responsible_Party_Filing_Type.Filing_Type_id INNER JOIN
dbo.lm_Responsible_Party ON dbo.lm_Responsible_Party_Filing_Type.Party_id = dbo.lm_Responsible_Party.Party_idWHERE (dbo.lm_Service_Detail.Service_Detail_id = @serviceDetailID)/* Build message */
SET @p_subject = "KLM - Service ID: " + CAST(@serviceID AS varchar(4))SET @p_recipients = "" /*need string of addresses*/
SET @p_message = @p_message + "Service Detail ID: " + CAST(@serviceDetailID AS varchar(4)) + char(13)SET @p_message = @p_message + "Comment Date: " + CAST(@commentDate As varchar(25)) + char(13)SET @p_message = @p_message + "Comment Author: " + @commentAuthor + char(13)SET @p_message = @p_message + "Comment: " + @comment + char(13)PRINT "subject: " + @p_subject + char(13)PRINT "recip: " + @p_recipients + char(13)PRINT "msg: " + @p_message + char(13)/*Send the email*/
Execute master..xp_sendmail @recipients = @p_recipients, @message = @p_message, @subject = @p_subject END
GO
View 7 Replies
View Related
Feb 28, 2005
I am having problem with 'TOP @pageSize'. It doesn't work, but if I replace it by 'TOP 5' or 'TOP 6' etc., then the stored procedure runs without errors.
Can someone please tell me how I could use @pageSize here so that it dynamically determines the 'n' of 'TOP n' ?
ALTER PROCEDURE dbo.spGetNextPageRecords
(
@pageSize int,
@previousMaxId int
)
AS
/* SET NOCOUNT ON */
SELECT Top @pageSize ProductId, ProductName
FROM Products
WHERE (ProductID > @previousMaxId) order by ProductId
RETURN
View 4 Replies
View Related
May 7, 2005
Hello :) I need to do something like this:
CREATE PROCEDURE SelectCostumers @name varchar(100)
Declare @SQL = "SELECT Id, Name FROM Costumers"
AS
IF (@name IS NULL)
@SQL
ELSE
@SQL += "WHERE Name LIKE @name"
See, what I need is a string variable that I can concatenate with whatever I want depending on the parameter I get.
Thank you
View 2 Replies
View Related
Feb 26, 2004
I am trying to creating a table inside a stored procedure using SQL that works fine in Query Analyzer. However, when I check the syntax I get the following message:
Error 208: Invalid object name '##OPTIONSEX'
I am using the following SQL script:
CREATE PROCEDURE [dbo].[Test2] AS
CREATE TABLE ##OPTIONSEX
(
OPTION_PLAN VARCHAR(50),
TOT_OPTIONS_EXCHANGED FLOAT NULL
)
GO
INSERT ##OPTIONSEX
SELECT
B.COMPONENT,
TOT_OPTIONS_EXCHANGED = SUM(A.UNITS)
FROM TBLEXERCISEOPTIONS A, TBLCOMPONENT B
WHERE B.COMPONENTID = A.COMPONENTID
GROUP BY B.COMPONENT
GO
Any help getting this to run correctly would be appreciated.
View 3 Replies
View Related
Jun 23, 2006
Hi Folks!
I have a cursor inside a stored procedure that should identify rows based on certain criteria and update the columns on those records.
While I try to do so, the cursor goes into an infinite loop although I have only 1 record that matches my criteria. I think that the transaction is not commited and the cursor is picking up the same record for update.
Here is my sample record in table :tblMsg
SenderRef <space> MsgStatusId <space> MsgType <space>Groupid
1281341<space> 1 <space>KBC-NON-ETC-MATCHED-BLIM <space>191902
1281341 <space>18 <space>KBC-RCVD-ADM <space>191902<space>
and here is my code.
CREATE PROCEDURE msg_ResolveADMBeforeBlim
AS
DECLARE @blimGroupId AS INT
DECLARE @admSenderRef AS VARCHAR(50)
DECLARE admCursor CURSOR FOR
SELECT senderref
FROMtblMsg
WHERE msgstatusid = 18
AND msgtype = 'KBC-RCVD-ADM'
FOR UPDATE
OPEN admCursor
FETCH NEXT FROM admCursor INTO @admSenderRef
WHILE @@FETCH_STATUS = 0
BEGIN
--FIND CORRESPONDING BLIM RECORD AND GRAB ITS GROUPID TO UPDATE THE ADM
SELECT @blimGroupId = GroupID
FROM tblMsg
WHERE msgType = 'KBC-NON-ETC-MATCHED-BLIM'
AND SenderRef = @admSenderRef
PRINT 'AFTER SELECT INSIDE WHILE: Senderref- >' + @admSenderRef;
--UPDATE THE ADM RECORD WITH THE GROUPID AND MSGSTATUS = 3
BEGIN
UPDATE tblMsg
SET MsgStatusId = 3, GroupId = @blimGroupId
WHERE CURRENT OF admCursor
END
PRINT 'AFTER UPDATE INSIDE WHILE';
END
CLOSE admCursor
DEALLOCATEadmCursor
The update statement was included beteween a BEGIN TRAN and END TRAN. But no joy.
Any ideas why this would happen?
Thanks for your help.
Arun
View 3 Replies
View Related
Jul 20, 2005
Okay, so I have a problem and I would be REALLY grateful for anyassistance anyone can offer because I have found little or no help onthe web anywhere.I want to access and do joins between tables in two different SQL db'son the same server. Heres what Im dealing with.In one database resides all of my security features for our clients,where it decides who can login, etc etc....In another database, I need to cross reference with a few fields in mysecurity db.See the issue Im running into here is that because the way the peoplehave their databases set up for different products, I would normallyhave to put these tables with security features in every database...which is horrible, because every time I do an update I would have todo it in 12 different places. Thats not efficient at all.So I thought if I had one central DB, where all security features arecontrolled from, that would be perfect... now the issue is crossreferencing and doing joins with other tables that ARENT in the samedb....have I lost you yet?I appreciate all of your help!THANKS!!
View 5 Replies
View Related
Dec 21, 2006
Hi for all
i just get the news that the Dec. CTP of SQL Server 2005 & tools is released !
but my dream is to see debugging stored procedure support inside the SSMSE as debugging applications inside Visual Studio 2005
Many many many thanks to Microsoft and for the great efforts on the cool products
Mohamed
View 3 Replies
View Related
Apr 30, 2008
Hi,
I have to write a stored procedure what repair a table.
It have to delete lost rows before make relation to itself (PK column is 'Kw_KeywordID', FK column is 'Kw_ParentID').
I do not found the way to write this procedure to can create statement from parameter of the procedure.
I would like to pass the table name, but I receive error if the query like 'Select ... Form @Table ....'.
If the parameter is in the 'WHERE', nothing problem.
My procedure is:
CREATE PROCEDURE sp_Repair_IS_KW_AbtKz176
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
declare @OrphanRowCount int
select @OrphanRowCount = 1
while(@OrphanRowCount > 0)
begin
DECLARE KWCursor CURSOR FOR
SELECT count(*) AS cRowCount FROM IS_KW_AbtKz176 WHERE Kw_ParentID IS NOT NULL AND Kw_ParentID NOT IN (SELECT Kw_KeywordID FROM IS_KW_AbtKz176);
OPEN KWCursor;
FETCH NEXT FROM KWCursor INTO @OrphanRowCount
CLOSE KWCursor
DEALLOCATE KWCursor
IF (@@FETCH_STATUS = 0) AND (@OrphanRowCount > 0)
BEGIN
exec('DELETE FROM IS_KW_AbtKz176 WHERE Kw_ParentID IS NOT NULL AND Kw_ParentID NOT IN (SELECT Kw_KeywordID FROM IS_KW_AbtKz176)')
END
end
END
GO
How can I run fully parameterized queries from an SP.
I can make it only like exec('DELETE FROM' + @TableName + ...)
Thank you for any idea,
Imre
View 2 Replies
View Related
Apr 9, 2008
My situation is this: I have a requirement table,in the requirement table i have a field which is allow_multiple,if it allows multiple the value is 1 and 0 if it will not allow and also I have an insert storedprocedure for inserting licenses which will be added in the Staffl table.When i insert a new license for the staff,it should check in the requirement table if the new inserted lincense does have 0 or 1 value in the allow multiple field.If it has a value of 0 the new license should not be inserted.What would be the good way to compare the existing licenses of the staff and the newluy added?
Funnyfrog
View 1 Replies
View Related
Jul 10, 2014
All of a sudden hen I script out a Stored Procedure it encloses strings (edit) in Double Quotes?
For example ANDPromo.[Group] IN (''FL_Small'',''FL_Large'')
Also it generates this code that I do not want. I just was Create Procedure...
IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[usp_IncentiveReport]') AND type in (N'P', N'PC'))
BEGIN
EXEC dbo.sp_executesql @statement = N'
What options do I need to set?
View 5 Replies
View Related
Nov 7, 2007
Dear all,i'm facing a problem with my storedprocedure which happened when i ran my web application and reach to the point where my class invoke this storedprocedure,my SP contains a cursor that built his sql according to certain condition, so i put the "SET @cur Cursor For....." inside the if block (definitely i've declared it under AS keyword directly) and this SP is working well inside sql server(I've tested it), BUT when my ASP.net code invoke this SP it gives me the following error : "The Variable @cur does not currently have a cursor allocated to it" repeated as much as there are IF clauses in my SP,Please Help.Regards,
View 1 Replies
View Related
Feb 2, 2004
I want to use a stored procedure inside Sql Server from my aspx page so that the data entered in the form goes to the database after submit.
My stored procedure (inside the SQL Server) inserts several fields in a table and it returns two variables.
What code I need to write in order to pass the data from the form to the stored procedure inside the Sql Server? And to store the two returned values?
Thanks
View 7 Replies
View Related
May 28, 2006
Hi,
I'm new to ASP.NET 2.0. I have a sqldatasource and a formview controls on a web page and inside the formview control I have two textboxes. When I click the UPDATE button in the formview, I'd like to be able to retrieve the values of the textboxes inside the formview control and pass these values to a 'Update' SQL stored procedure defined in the Sqldatasource.
Does anyone know how I can do this? Hope my question is clear.
Thanks in advance.
hakl
View 1 Replies
View Related
