Complex Store Procedure
Dec 12, 2007
How do you write a store procedure to meet the following conditions:
PROXIMITY SERACH PROCEDURE
COMPANY table
PK company_id int
company_name varchar(100)
premise varchar(10)
street varchar(30)
town varchar(100)
postcode char(7)
x_loc int
y_loc int
COMPANY_KEYWORD table
PK, FK1 company_id int
PK keyword varchar(100)
The data above shows an extract of a company listings database. The company table holds the name and address of the company as well as a physical location in terms of an Easting and Northing co-ordinate. Each company has one or more keywords or phrases associated with it in the company_keyword table. The full database holds 5 million companies with an average of 4 keywords each,
A stored procedure is required to provide proximity searching of the database. The procedure should return a list of companies that satisfy the keyword search expression and fall within the defined maximum distance of the specified location. Results should be limited to show the closest companies up to a maximum of @max_records.
proximity_search
@search_expression varchar(255)
,@x_locint
,@y_locint
,@max_distanceint
,@max_recordsint
Example Search Expressions
@search_expression - Description
TESCO AND CASHPOINT -Return all companies that have all of the
keywords specified.
TESCO OR SAINSBURY’’S - Return all records that have one or more of
the keywords specified.
TESCO EXPRESS AND CASHPOINT
OR
SAINSBURY’S LOCAL - Return all companies that have either both of
the first two keywords or the third.
Distance can be calculated using the following formula:
Distance = sqrt( square(x1-x2) + square(y1-y2) )
THE QUESTION
1. Create a stored procedure to satisfy the requirement shown above
2.Comment on the database design and identify any indexes that may be
appropriate.
View 7 Replies
ADVERTISEMENT
Dec 12, 2007
How do you write a store procedure to meet the following conditions:
PROXIMITY SERACH PROCEDURE
COMPANY table
PK company_id int
company_name varchar(100)
premise varchar(10)
street varchar(30)
town varchar(100)
postcode char(7)
x_loc int
y_loc int
COMPANY_KEYWORD table
PK, FK1 company_id int
PK keyword varchar(100)
The data above shows an extract of a company listings database. The company table holds the name and address of the company as well as a physical location in terms of an Easting and Northing co-ordinate. Each company has one or more keywords or phrases associated with it in the company_keyword table. The full database holds 5 million companies with an average of 4 keywords each,
A stored procedure is required to provide proximity searching of the database. The procedure should return a list of companies that satisfy the keyword search expression and fall within the defined maximum distance of the specified location. Results should be limited to show the closest companies up to a maximum of @max_records.
proximity_search
@search_expression varchar(255)
,@x_locint
,@y_locint
,@max_distanceint
,@max_recordsint
Example Search Expressions
@search_expression - Description
TESCO AND CASHPOINT -Return all companies that have all of the
keywords specified.
TESCO OR SAINSBURY’’S - Return all records that have one or more of
the keywords specified.
TESCO EXPRESS AND CASHPOINT
OR
SAINSBURY’S LOCAL - Return all companies that have either both of
the first two keywords or the third.
Distance can be calculated using the following formula:
Distance = sqrt( square(x1-x2) + square(y1-y2) )
THE QUESTION
1. Create a stored procedure to satisfy the requirement shown above
2.Comment on the database design and identify any indexes that may be
appropriate.
View 4 Replies
View Related
Nov 12, 2003
I have web forms with about 10-15 optional search parameters (fields) for a give table. Each item (textbox) in the form is treated as an AND condition.
Right now I build complex WHERE clauses based on wheather data is present in a textbox and AND each one in the clause. Also, if a particular field is "match any word", i get a ANDed set of OR's. As you can imagine, the WHERE clause gets quite large.
I build clauses like this (i.e., 4 fields shown):
SELECT * from tableName WHERE (aaa like '%data') AND (bbb = 'data') AND (ccc like 'data%') AND ( (xxx like '%data') OR (yyy like '%data%') )
My question is, are stored procedures better for building such dynamic SQL clauses? I may have one field or all fifteen. I've written generic code for building the clauses, but I don't know much about stored procedures and am wondering if I'm making this more difficult on myself.
View 7 Replies
View Related
May 11, 2006
We have some reports run quite slow because the queries are complicate and tables are large. So we create a materialized view in Oracle which store the result from the query and refresh it occationally. How to do this in MSSQL? I try the indexed view but seems it has lots of restrictions, our query has sub queries and cross database table joins so can't use the indexed view. Any other object or temp table can be used to cache the report data and be accessed globally by other procedures?
Any suggestions are welcome,
Cheers
View 5 Replies
View Related
Nov 13, 2006
I know I can call store procedure from store procedure but i want to take the value that the store procedure returned and to use it:
I want to create a table and to insert the result of the store procedure to it.
This is the code: Pay attention to the underlined sentence!
ALTER PROCEDURE [dbo].[test]
AS
BEGIN
SET NOCOUNT ON;
DROP TABLE tbl1
CREATE TABLE tbl1 (first_name int ,last_name nvarchar(10) )
INSERT INTO tbl1 (first_name,last_name)
VALUES (exec total_cash '8/12/2006 12:00:00 AM' '8/12/2006 12:00:00 AM' 'gilad' ,'cohen')
END
PLEASE HELP!!!! and God will repay you in kind!
Thanks!
View 7 Replies
View Related
Mar 19, 2001
I'm very new to the more advanced aspects of SQL server, such as Stored Procedures. I've come upon a problem that I've been unable to find in one of my reference books. I have data stored dynamically in different columns with dynamic labels. Meaning that for instance, a set of columns named TXT_1 through TXT_10 could contain anything from a description of an item to a part number, to the color, but in any order. There is a seperate table that contains the key as to what a particular column represents for a particular item. I need to pull all of that out, and I've done it before using VBA in my active server pages. However, now I'm working on a report in Crystal Reports that will display all of this data, and the best scenario I can think of is if I were able to assemble all of the data properly using a stored procedure before passing the data to Crystal. What I don't know how to do is use the result set from the key table which will return three fields, such as Item_no, Label, and then the name of the column in the other table from which to pull the data for example "TXT_1". This field is returned as a string value. How can I write a dynamic select statement that can select from any of the columns (TXT_1 - TXT_10) based on the string that I pull from the key table? Any help would be very much appreciated.
View 1 Replies
View Related
Mar 2, 2004
PAYROLL
PID|PNAME|STARTDATE|ENDDATE
1|BATCH1|2004-01-01|2004-01-04
2|BATCH2|2004-01-01|2004-01-04
TIMEENTRY
TID|PID|USERID|DATE|HOURS
1|1|49|2004-01-01|7
2|1|49|2004-01-02|8
3|1|49|2004-01-03|8
4|1|49|2004-01-04|6
.
.
.
11|1|50|2004-01-01|5
12|1|50|2004-01-02|2
13|1|50|2004-01-03|8
14|1|50|2004-01-04|8
21|2|49|2004-01-01|4
22|2|49|2004-01-02|2
23|2|49|2004-01-03|2
24|2|49|2004-01-04|8
.
.
.
31|2|50|2004-01-01|8
32|2|50|2004-01-02|8
33|2|50|2004-01-03|8
34|2|50|2004-01-04|8
- contains timeentry(HOURS) for different users(USERID) FOR different payroll batches(PID) for different dates(DATE)
the query/procedure should return data this way
Userid|PID|2004-01-01|2004-01-02|2004-01-03|2004-01-04'<== HEADER ROW
1|49|7|8|8|6
1|50|5|2|8|8
2|49|5|2|8|8
2|50|8|8|8|8
Im not sure how to start cause the dates in the headers are the start date and end date of the Payroll
Any suggestions or help is appreciated
thanks
View 1 Replies
View Related
Apr 15, 2008
Dear All,
I have a complex stored proc, which I inherited from the previous developer, and I wish to fine tune it a bit, because its taking 1.36 mins to retreive 5383 rows, which I think is quite excessive.
The stored proc is as follows:-
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[sp_getpageidsforedb]
@projectid int
AS
create table #ebdindex (
[indexid] [int] IDENTITY (1, 1) NOT NULL ,
[stringid] [nvarchar](4000)COLLATE Latin1_General_CI_AS,
[trans] [nvarchar](4000)COLLATE Latin1_General_CI_AS,
[status] [int]
)
create table #residinpages (
[indexid] [int],
[stringid] [nvarchar](4000)COLLATE Latin1_General_CI_AS,
[pageid] [int]
)
create table #residinpages2 (
[indexid] [int],
[pageid] [int]
)
insert into #ebdindex
Select stringid, trans, status from edbs e where
e.lcid='en' and e.projectid=@projectid
insert into #residinpages
select distinct e.indexid, e.stringid, CASE
WHEN s.pageid IS NULL then 0
ELSE s.pageid
END as pageid
from #ebdindex e,
stringidsinpages s, pages p
where e.stringid *=s.stringid
order by e.indexid
declare @indexId nchar(128)
declare @pageId nchar(128)
declare @RowNum int
select top 1 @indexId=indexID, @pageid=pageid from #residinpages
set @RowNum = 0
WHILE @RowNum < (select max(indexid) from #ebdindex)
BEGIN
set @RowNum = @RowNum + 1
insert into #residinpages2 values( @indexId, @pageid)
select top 1 @indexId=indexID, @pageid=pageid from #residinpages
where indexId > @indexId
END
select e.indexid,e.stringid, e.trans, r.pageid, e.status from #residinpages2 r, #ebdindex e
where e.indexid=r.indexid
drop table #residinpages2
drop table #residinpages
drop table #ebdindex
Is there another way to write this stored proc, to make it return the results faster? I am new in SQL and this is quite a complex one for me.
Your help is much appreciated
Thanks
Regards
Johann
View 7 Replies
View Related
Apr 14, 2008
I created a site that will link the buyer and the seller together (think of ebay) for example:
Bob goes to my site to post an item he wants to sell (lets say a cell phone)
Steve goes to my site looking for a cell phone and he purchased Bob€™s cell phone (transaction is done on Paypal€™s site).
I have to make sure only one person check the same item at one time. For example
Steve and Mike are looking for a cell phone; Steve and Mike like the same cell phone. If Steve clicked on buy now Mike should not be able to check out the same item/or make mike wait to see if the Steve going to processed with his payment
after a lot of research i should do the check on the data layer not in the UI. so i need help to created a stored procedure that will do the following (do you think this is a good idea)
Case 1
1- Check if there is an order for this item in table checkout lets say item number is 45
Checkout Table
Item Number Email isComplete DTS
2- if there is no order ,a row should be created in checkout table
insert into checkout values (@itemnumber,@email,false,getdate())
Item Number Email isComplete DTS
45 Steve@hotmail.com false 04/12/2008 1:13:45
the stored procedure should return €śtrue€? at this point
3- whenever the column isComplete updated to true by another storedprocedure the row should be deleted
Delete from checkout where Item Number =45
Case2
1- Check if there is an order for this item in table checkout
2- If yes I need to check if it is => 20 minutes if true also the column should be updated with the newest date then it should return true
If <20 return true;
here are my stored procedure parameters
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE <Procedure_Name, sysname, ProcedureName>
@ProductID int,
@BuyerEmail varchar(200)
AS
BEGIN
declare @DTS as datetime
declare @IsComplete as bit
select @DTS = getdate();
END
GO
Thanks
View 4 Replies
View Related
Apr 6, 2008
hi!
i have two tables: Pictures (PictureID, UserName, UserID, DateAdded, Comments int) and UserVisits (VisitID, UserName, UserID, PictureID, NewComment bit)
if a new comment is added on a picture with PictureID = 4, i update NewComment from UserVisits with 1 (true) where PictureID = 4 to all rows,
and if a user visits a picture with PictureID = 5, NewComment will be set to 0 back where pictureID = 5 (something like asp.net, when a reply is added to a therad)
i need to make a stored procedure with UserName input parameter witch selects ALL pictures from Pictures table and selects NewComment (true or false) from UserVisits witch corresponds with that UserName
!!! Is possible that in UserVisits to not have yet any column where UserName corresponds with the user who visits if the user did not visited that picture yet (this stored procedure will be used on a Repeater witch lists all the pictures)
if i was not clear please tell me, sorry i am verry bad at T-SQL language
thanks in advance
View 2 Replies
View Related
Jul 19, 2000
I have the following design as my starting point.
4 sql tables.
I will be doing a variety of searches against these 4 tables (525 different searches to be exact).
Which search is performed is based on table requested and the search criteria fields passed. One of the four tables will always be searched and one of the other three as well.
I have a driver stored procedure that determines which of the 3 tables to read and calls separate subordinate stored procedures for the table selected. Then it calls a stored procedure to select from the table that is always read.
I am building temporary tables to hold the results from the two tables read in each pass. Then the driver will return the results to the client.
My question is this, is there a more elegant way to determine which one of my 525 queries need to be executed than a very ugly large if/then/else, checking all of the possible combinations of parameters passed in each subordinate stored procedure?
Is there some way to create dynamic sql select statements based on the parameters passed to the subordinate stored procedures that have actual values (not null)?
Any insight would be a big help.
Judy
View 3 Replies
View Related
Jun 7, 2006
Hi All,
I have a table that hold status history records for cases. In this table is a status field with values, opened, assigned, or complete. Each case can be assigned a number of times before it is complete, and can be reassigned. I have the need to run a query that will get each case that is still assigned, and not yet complete. I wrote a stored procedure that contains a cursor containing each case, and get the last status history record for each case and puts it into a temp table to return to the user, but is hurting performance as there are .5 million records here. Does anyone know of a better way of doing this?
Thanks in advance : )
View 1 Replies
View Related
Aug 24, 2007
Hello,
I have a procedure stored in my application which takes a very very long time to execute.
It deals with the relations of compositon of a product (a computer is made up of a screen, a keyboard and electronic components).
The subject is about component/ sub component relations (article or product breakdown) also called non hierachical relationships.
The products have a code composed of 22 characters (ARTICLE_CODE) but the links in the breakdown between articles are builted on the first 12 characters (ROOT_ARTICLE_CODE).
So in the relationship table we can find an article (V_ROOT_PART_NUMBER_CODE) associated with several articles (N_ARTICLE_FATHER_ID) because they share the 12 first characters
Example
N_ARTICLE_ID;N_FATHER_ID;N_DATASOURCE_ID;N_SOURCE_ID;V_ROOT_PART_NUMBER_CODE;V_NODE_LABEL;B_ACTIVE;V_FATHER_ROOT_PART_NUMBER_CODE;V_FATHER_NODE_LABEL;B_FATHER_ACTIVE
1005;20637;2;14;5M4K85638000;5M4K85638000 - TEST7;1;TK18J1066002;TK18J1066002 - TEST1;1
1005;20638;2;14;5M4K85638000;5M4K85638000 - TEST7;1;A2HG31T67000;A2HG31T67000 - TEST2;1
1005;20639;2;14;5M4K85638000;5M4K85638000 - TEST7;1;A2HG31T67002;A2HG31T67002 - TEST3;1
1005;23946;2;14;5M4K85638000;5M4K85638000 - TEST7;1;T5D8FD231000;T5D8FD231000 - TEST4;1
1005;24034;2;14;5M4K85638000;5M4K85638000 - TEST7;1;T5D8FD277000;T5D8FD277000 - TEST5;1
1005;109862;2;14;5M4K85638000;5M4K85638000 - TEST7;1;T5D8FD277000;T5D8FD277000 - TEST5;1
1005;109876;2;14;5M4K85638000;5M4K85638000 - TEST7;1;T5D8FD277000;T5D8FD277000 - TEST5;1
1005;109877;2;14;5M4K85638000;5M4K85638000 - TEST7;1;T5D8FD277000;T5D8FD277000 - TEST5;1
9560;706;2;12;5F4RE5135200;5F4RE5135200 - TEST8;1;5F4RE5145002;5F4RE5145002 - TEST6;1
9550;706;2;12;5F4RE5128202;5F4RE5128202 - TEST9;1;5F4RE5145002;5F4RE5145002 - TEST6;1
14049;706;2;12;5F4RE5126200;5F4RE5126200 - TEST10;1;5F4RE5145002;5F4RE5145002 - TEST6;1
14049;707;2;12;5F4RE5126200;5F4RE5126200 - TEST10;1;5F4RE5145002;5F4RE5145002 - TEST6;1
9550;707;2;-6;5F4RE5128202;5F4RE5128202 - TEST9;1;5F4RE5145002;5F4RE5145002 - TEST6;1
9560;707;2;-6;5F4RE5135200;5F4RE5135200 - TEST8;1;5F4RE5145002;5F4RE5145002 - TEST6;1
9554;707;2;-6;5F4RE5132202;5F4RE5132202 - TEST11;1;5F4RE5145002;5F4RE5145002 - TEST6;1
705;707;2;-6;5F4RE5128202;5F4RE5128202 - TEST12;1;5F4RE5145002;5F4RE5145002 - TEST6;1
18405;707;2;-6;5F4RE5145220;5F4RE5145220 - TEST13;1;5F4RE5145002;5F4RE5145002 - TEST6;1
But sometimes links are missing between identifiers (I have already an existing link between two articles. I have just added an article (new N_ARTICLE_ID) common on the first 12 characters with one of the previous elements.
I must thus create a new link father/ child because of this common element.
I can create several links if the article is linked with seral articles at a component level (the same keyboard can be used in several models of computers)
I make the same procedure for the father (by adding the links with existing child for an article common at 12 characters).
The problem is that it is a very very long procedure.
I have 75000 articles and it is necessary at least 48H for me to manage them.
Could you help me to optimize the code of this stored procedure?
Thank you by advance
Code Snippet
CREATE TABLE [ARTICLE] (
[N_ARTICLE_ID] [bigint] IDENTITY (1, 1) NOT NULL ,
[V_CODE] [varchar] (40) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
[V_PART_NUMBER_LABEL] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[B_ACTIVE] [bit] NULL ,
CONSTRAINT [PK_ARTICLE] PRIMARY KEY CLUSTERED
(
[N_ARTICLE_ID]
) ON [PRIMARY] ,
CONSTRAINT [IX_ARTICLE_CODE_UNIQUE] UNIQUE NONCLUSTERED
(
[V_CODE]
) ON [PRIMARY]
GO
CREATE TABLE [ARTICLE_BREAKDOWN] (
[N_ARTICLE_ID] [bigint] NOT NULL ,
[N_ARTICLE_FATHER_ID] [bigint] NOT NULL ,
[N_DATASOURCE_ID] [bigint] NOT NULL ,
[N_SOURCE_ID] [bigint] NOT NULL ,
[V_ROOT_CODE] [char] (12) COLLATE SQL_Latin1_General_CP1_CS_AS NULL ,
[V_NODE_LABEL] [char] (65) COLLATE SQL_Latin1_General_CP1_CS_AS NULL ,
[B_ACTIVE] [bit] NULL ,
[V_FATHER_ROOT_CODE] [char] (12) COLLATE SQL_Latin1_General_CP1_CS_AS NULL ,
[V_FATHER_NODE_LABEL] [char] (65) COLLATE SQL_Latin1_General_CP1_CS_AS NULL ,
[B_FATHER_ACTIVE] [bit] NULL ,
CONSTRAINT [PK_ARTICLE_BREAKDOWN] PRIMARY KEY CLUSTERED
(
[N_ARTICLE_ID],
[N_ARTICLE_FATHER_ID],
[N_DATASOURCE_ID],
[N_SOURCE_ID]
) ON [PRIMARY] ,
CONSTRAINT [FK_ARTICLE_BREAKDOWN_ARTICLE] FOREIGN KEY
(
[N_ARTICLE_ID]
) REFERENCES [ARTICLE] (
[N_ARTICLE_ID]
),
CONSTRAINT [FK_ARTICLE_BREAKDOWN_ARTICLE1] FOREIGN KEY
(
[N_ARTICLE_FATHER_ID]
) REFERENCES [ARTICLE] (
[N_ARTICLE_ID]
),
CONSTRAINT [FK_ARTICLE_BREAKDOWN_SOURCE] FOREIGN KEY
(
[N_SOURCE_ID]
) REFERENCES [SOURCE] (
[N_SOURCE_ID]
)
) ON [PRIMARY]
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
GO
Code Snippet
CREATE PROCEDURE [dbo].[LOAD_ARTICLE_BREAKDOWN_PACKAGE]
@ARTICLE_ID AS BIGINT= NULL,@ARTICLE_FATHER_ID AS BIGINT= NULL, @DATASOURCE AS BIGINT= NULL, @SOURCE AS BIGINT= NULL
AS
BEGIN
SET NOCOUNT ON;
If @ARTICLE_ID IS NOT NULL AND @ARTICLE_FATHER_ID IS NOT NULL AND @DATASOURCE IS NOT NULL AND @SOURCE IS NOT NULL
BEGIN
/*Table pour mettre tous les pn fils
if exists (SELECT * FROM dbo.sysobjects WHERE id = object_id(N'[dbo].[#ODS_TEMP_ARTICLE_PACKAGE_ARTICLE_CHILD_BREAKDOWN]') AND OBJECTPROPERTY(id, N'IsUserTable') = 1)
BEGIN
DROP TABLE [dbo].[#ODS_TEMP_ARTICLE_PACKAGE_ARTICLE_CHILD_BREAKDOWN]
END*/
CREATE TABLE [dbo].[#ODS_TEMP_ARTICLE_PACKAGE_ARTICLE_CHILD_BREAKDOWN] (
[N_ARTICLE_ID] [bigint] NOT NULL
)
ALTER TABLE [dbo].[#ODS_TEMP_ARTICLE_PACKAGE_ARTICLE_CHILD_BREAKDOWN] WITH NOCHECK ADD
CONSTRAINT [PK_ODS_TEMP_ARTICLE_PACKAGE_ARTICLE_CHILD_BREAKDOWN] PRIMARY KEY CLUSTERED
(
[N_ARTICLE_ID]
) ON [PRIMARY]
/*Table pour mettre tous les pn père
if exists (SELECT * FROM dbo.sysobjects WHERE id = object_id(N'[dbo].[#ODS_TEMP_ARTICLE_PACKAGE_ARTICLE_FATHER_BREAKDOWN]') AND OBJECTPROPERTY(id, N'IsUserTable') = 1)
BEGIN
DROP TABLE [dbo].[#ODS_TEMP_ARTICLE_PACKAGE_ARTICLE_FATHER_BREAKDOWN]
END*/
CREATE TABLE [dbo].[#ODS_TEMP_ARTICLE_PACKAGE_ARTICLE_FATHER_BREAKDOWN] (
[N_ARTICLE_ID] [bigint] NOT NULL
)
ALTER TABLE [dbo].[#ODS_TEMP_ARTICLE_PACKAGE_ARTICLE_FATHER_BREAKDOWN] WITH NOCHECK ADD
CONSTRAINT [PK_ODS_TEMP_ARTICLE_PACKAGE_ARTICLE_FATHER_BREAKDOWN] PRIMARY KEY CLUSTERED
(
[N_ARTICLE_ID]
) ON [PRIMARY]
Declare @LABEL1 as CHAR(50)
Declare @SPARE1 as BIT
Declare @LABEL2 as CHAR(50)
Declare @SPARE2 as BIT
Declare @ARTICLEC as BIGINT
Declare @ARTICLEF as BIGINT
/*information sur le premier PN*/
SET @LABEL1 = (SELECT TOP 1 CASE WHEN PNLABEL1.V_PART_NUMBER_LABEL IS NULL THEN '' ELSE PNLABEL1.V_PART_NUMBER_LABEL END FROM ARTICLE PNLABEL1
WHERE PNLABEL1.N_ARTICLE_ID IN (SELECT PNLABEL2.N_ARTICLE_ID FROM ARTICLE PNLABEL2 WHERE LEFT(PNLABEL2.V_CODE,12) in (SELECT left(V_CODE,12) FROM ARTICLE WHERE N_ARTICLE_ID=@ARTICLE_ID)) order by PNLABEL1.V_PART_NUMBER_LABEL desc)
SET @SPARE1 = (SELECT TOP 1 PNSPARE.B_ACTIVE FROM ARTICLE PNSPARE
WHERE PNSPARE.N_ARTICLE_ID in (SELECT PNSPARE1.N_ARTICLE_ID FROM ARTICLE PNSPARE1 WHERE (LEFT(PNSPARE1.V_CODE,12) in (SELECT left(V_CODE,12) FROM ARTICLE WHERE N_ARTICLE_ID=@ARTICLE_ID))))
/*information sur le second PN*/
SET @LABEL2 = (SELECT TOP 1 CASE WHEN PNLABEL1.V_PART_NUMBER_LABEL IS NULL THEN '' ELSE PNLABEL1.V_PART_NUMBER_LABEL END FROM ARTICLE PNLABEL1
WHERE PNLABEL1.N_ARTICLE_ID IN (SELECT PNLABEL2.N_ARTICLE_ID FROM ARTICLE PNLABEL2 WHERE LEFT(PNLABEL2.V_CODE,12) in (SELECT left(V_CODE,12) FROM ARTICLE WHERE N_ARTICLE_ID=@ARTICLE_FATHER_ID)) order by PNLABEL1.V_PART_NUMBER_LABEL desc)
SET @SPARE2 = (SELECT TOP 1 PNSPARE.B_ACTIVE FROM ARTICLE PNSPARE
WHERE PNSPARE.N_ARTICLE_ID in (SELECT PNSPARE1.N_ARTICLE_ID FROM ARTICLE PNSPARE1 WHERE (LEFT(PNSPARE1.V_CODE,12) in (SELECT left(V_CODE,12) FROM ARTICLE WHERE N_ARTICLE_ID=@ARTICLE_FATHER_ID))))
/*recherche les articles communs a 12 dans la première boucle pour le fils*/
/*recherche les articles communs a 12 dans la seconde boucle pour le père*/
DELETE FROM ARTICLE_BREAKDOWN WHERE (N_DATASOURCE_ID=@DATASOURCE) AND (N_SOURCE_ID=-6) AND (N_ARTICLE_ID = @ARTICLE_ID) AND (N_ARTICLE_FATHER_ID = @ARTICLE_FATHER_ID)
IF (NOT EXISTS(SELECT * FROM ARTICLE_BREAKDOWN WHERE (N_DATASOURCE_ID=@DATASOURCE) AND (N_SOURCE_ID=@SOURCE) AND (N_ARTICLE_ID = @ARTICLE_ID) AND (N_ARTICLE_FATHER_ID = @ARTICLE_FATHER_ID)))
BEGIN
INSERT INTO ARTICLE_BREAKDOWN
(N_ARTICLE_ID, N_ARTICLE_FATHER_ID, N_DATASOURCE_ID, N_SOURCE_ID, V_ROOT_CODE, V_NODE_LABEL,
B_ACTIVE, V_FATHER_ROOT_CODE, V_FATHER_NODE_LABEL, B_FATHER_ACTIVE)
SELECT PN1.N_ARTICLE_ID, PN2.N_ARTICLE_ID AS FATHER_ID, @DATASOURCE AS DATASOURCE, @SOURCE AS SOURCE, left(PN1.V_CODE,12),
left(PN1.V_CODE,12) + ' - ' + @LABEL1, @SPARE1, left(PN2.V_CODE,12) AS FATHER_CODE,
left(PN2.V_CODE,12) + ' - ' + @LABEL2 AS FATHER_LABEL, @SPARE2 AS FATHER_SPARE
FROM ARTICLE PN1 CROSS JOIN
ARTICLE PN2
WHERE (PN2.N_ARTICLE_ID = @ARTICLE_FATHER_ID) AND (PN1.N_ARTICLE_ID = @ARTICLE_ID);
END
INSERT INTO #ODS_TEMP_ARTICLE_PACKAGE_ARTICLE_CHILD_BREAKDOWN
SELECT PNLIST.N_ARTICLE_ID FROM ARTICLE PNLIST
WHERE (LEFT(PNLIST.V_CODE,12) in (SELECT left(V_CODE,12) FROM ARTICLE WHERE N_ARTICLE_ID=@ARTICLE_ID))
WHILE EXISTS(SELECT * FROM #ODS_TEMP_ARTICLE_PACKAGE_ARTICLE_CHILD_BREAKDOWN)
BEGIN
SET @ARTICLEC = (SELECT TOP 1 N_ARTICLE_ID FROM #ODS_TEMP_ARTICLE_PACKAGE_ARTICLE_CHILD_BREAKDOWN)
INSERT INTO #ODS_TEMP_ARTICLE_PACKAGE_ARTICLE_FATHER_BREAKDOWN
SELECT PNLIST.N_ARTICLE_ID FROM ARTICLE PNLIST
WHERE (LEFT(PNLIST.V_CODE,12) in (SELECT left(V_CODE,12) FROM ARTICLE WHERE N_ARTICLE_ID=@ARTICLE_FATHER_ID))
WHILE EXISTS(SELECT * FROM #ODS_TEMP_ARTICLE_PACKAGE_ARTICLE_FATHER_BREAKDOWN)
BEGIN
SET @ARTICLEF = (SELECT TOP 1 N_ARTICLE_ID FROM #ODS_TEMP_ARTICLE_PACKAGE_ARTICLE_FATHER_BREAKDOWN)
IF (NOT EXISTS(SELECT * FROM ARTICLE_BREAKDOWN WHERE (N_DATASOURCE_ID=@DATASOURCE) AND (N_ARTICLE_ID = @ARTICLEC) AND (N_ARTICLE_FATHER_ID = @ARTICLEF)))
BEGIN
INSERT INTO ARTICLE_BREAKDOWN
(N_ARTICLE_ID, N_ARTICLE_FATHER_ID, N_DATASOURCE_ID, N_SOURCE_ID, V_ROOT_CODE, V_NODE_LABEL,
B_ACTIVE, V_FATHER_ROOT_CODE, V_FATHER_NODE_LABEL, B_FATHER_ACTIVE)
SELECT PN1.N_ARTICLE_ID, PN2.N_ARTICLE_ID AS FATHER_ID, @DATASOURCE AS DATASOURCE, -6 AS SOURCE, left(PN1.V_CODE,12),
left(PN1.V_CODE,12) + ' - ' + @LABEL1, @SPARE1, left(PN2.V_CODE,12) AS FATHER_CODE,
left(PN2.V_CODE,12) + ' - ' + @LABEL2 AS FATHER_LABEL, @SPARE2 AS FATHER_SPARE
FROM ARTICLE PN1 CROSS JOIN
ARTICLE PN2
WHERE (PN2.N_ARTICLE_ID = @ARTICLEF) AND (PN1.N_ARTICLE_ID = @ARTICLEC);
END
DELETE FROM #ODS_TEMP_ARTICLE_PACKAGE_ARTICLE_FATHER_BREAKDOWN WHERE N_ARTICLE_ID = @ARTICLEF
END
DELETE FROM #ODS_TEMP_ARTICLE_PACKAGE_ARTICLE_CHILD_BREAKDOWN WHERE N_ARTICLE_ID = @ARTICLEC
END
END
/*if exists (SELECT * FROM dbo.sysobjects WHERE id = object_id(N'[dbo].[#ODS_TEMP_ARTICLE_PACKAGE_ARTICLE_CHILD_BREAKDOWN]') AND OBJECTPROPERTY(id, N'IsUserTable') = 1)
BEGIN
DROP TABLE [dbo].[#ODS_TEMP_ARTICLE_PACKAGE_ARTICLE_CHILD_BREAKDOWN]
END
if exists (SELECT * FROM dbo.sysobjects WHERE id = object_id(N'[dbo].[#ODS_TEMP_ARTICLE_PACKAGE_ARTICLE_FATHER_BREAKDOWN]') AND OBJECTPROPERTY(id, N'IsUserTable') = 1)
BEGIN
DROP TABLE [dbo].[#ODS_TEMP_ARTICLE_PACKAGE_ARTICLE_FATHER_BREAKDOWN]
END*/
END
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
View 2 Replies
View Related
Nov 20, 2013
My store Procedure is not save in Strore Procedure folder at the time of saving it give me option to save in Project folder and file name default is SQLQuery6.sql when i save it after saving when i run my store procedure
exec [dbo].[SP_GetOrdersForCustomer] 'ALFKI'
I am getting below error :
Msg 2812, Level 16, State 62, Line 1
Could not find stored procedure 'dbo.SP_GetOrdersForCustomer'.
View 13 Replies
View Related
Feb 17, 2008
Hi guysi would really appreciate your help here. what am i doing wrong with this stored procedure ALTER PROCEDURE usp_CreateNewCustomer( @LName as varchar(50), @FName as varchar(50), @Dept as varchar(50)=NULL, @PhoneType as varchar(50)=NULL, @Complete as Bit=NULL, @CustomerID as Int OUTPUT, @FaxModel as varchar(50)=NULL, @FaxNumber as varchar(50)=NULL, )ASINSERT INTO [CustomerInfo] ([LName], [FName], [Dept], [PhoneType], [Complete]) VALUES (@LName, @FName, @Dept, @PhoneType, @Complete)SELECT SCOPE_IDENTITY()INSERT INTO Extras (CustomerID, FaxModel, FaxNumber) VALUES (@CustomerID, @FaxModel, @FaxNumber)RETURN It keeps on complaning "'usp_CreateNewCustomer' expects parameter '@CustomerID', which was not supplied."thanks
View 4 Replies
View Related
Feb 28, 2008
Hi all,
I have a few question regarding SPROC. Firstly, I want to create a sp, that will return a multiple column of data, how do you achieve that. Secondly, I want to create a store procedure that will return a multiple columns in a cursor as an output variable. Any help will be much appreciated. Can you have more then 1 return parameters???
Thanks.
Kabir
View 2 Replies
View Related
Mar 5, 2008
I have asp.net web application which interface with SQL server,
I want to run store procedure query of SQL using my asp.net application.
How to declare connectons strings, dataset, adapter etc to run my store procedure resides in sql server.
for Instance Dim connections as string,
Dim da as dataset, Dim adpt as dataadapter. etc
if possible , then show me completely code so I can run store procedure using my button click event in my asp.net application
thank you
maxmax
View 2 Replies
View Related
Apr 11, 2005
I am not sure if it is right place to ask the question. I have a store procedure in which funcitons are called and several temp tables are created. When I use sql analyzer, it runs fast. But when I called it from asp.net app, it runs slow and it waits and waits to get data and insert into temp tables and return. Though I have used with (nolock), it still not imprvoed. Any suggestions? Thanks in advance.
NetAdventure
View 1 Replies
View Related
Jun 8, 2006
Hello, I am very new to ASP.NET and SQL Server. I am a college student and just working on some project to self teaching myself them both. I am having a issue. I was wondering if anyone could help me.
Ok, I am creating a web app that will help a company to help with inventory. The employee's have cretin equipment assign to them (more then one equipment can be assigned). I have a search by equipment and employee, to search by equipment the entire database even then equipment that isn't assigned with the employee's it shows only that employees and if they have any equipment. They can select a recorded to edit or see the details of the record. The problem i am having is that the Info page will not load right. I am redirected the Serial Number and EmployeeID to the info page. I got everything working except one thing. If a person has more then one equipment when i click on the select it redirect and only shows the first record not the one I selected. and when i change it, a employee that doesn't have equipment will not show up totally.
SELECT E.FirstName AS UserFirstName, E.LastName AS UserLastName, eqtype.Description AS UserEquipType, empeq.UserEquipID, E.EmployeeID, E.cwopa_id, eq.IPAddress, eq.Location, eq.DataLine3, eq.DataLine2, eq.Voice, eq.DataLine1, eq.FloorBox, eq.Comments, eq.SerialNo, eq.Model, eq.Brand, eq.TagNo, eq.PurchaseLease, eq.WarrantyExpDate, eq.PhoneType, eq.PhoneNum, eq.CellNumber, eq.DataNumber, eq.SIDNumber, eq.Carrier
FROM dbo.EMPLOYEES AS E LEFT OUTER JOIN dbo.EMPLOYEES_EQUIP AS empeq ON empeq.EmployeeID = E.EmployeeID LEFT OUTER JOIN dbo.EQUIPMENT AS eq ON eq.EquipID = empeq.EquipID LEFT OUTER JOIN dbo.EQUIP_TYPE AS eqtype ON eqtype.EquipTypeID = eq.EquipTypeID WHERE E.EmployeeID = @EmployeeID and eq.SerialNo=@SerialNo
EmployeeID and SerialNo are primary keys.
I was thinking maybe create a store procedures, but I have no idea how to do it. I created this and no syntax error came up but it doesn't work
CREATE PROCEDURE dbo.inventoryinfo AS
DECLARE @EmployeeID int DECLARE @SerialNo varchar(50)
IF( @SerialNo is NULL)
SELECT E.FirstName AS UserFirstName, E.LastName AS UserLastName, eqtype.Description AS UserEquipType, empeq.UserEquipID, E.EmployeeID, E.cwopa_id, eq.IPAddress, eq.Location, eq.DataLine3, eq.DataLine2, eq.Voice, eq.DataLine1, eq.FloorBox, eq.Comments, eq.SerialNo, eq.Model, eq.Brand, eq.TagNo, eq.PurchaseLease, eq.WarrantyExpDate, eq.PhoneType, eq.PhoneNum, eq.CellNumber, eq.DataNumber, eq.SIDNumber, eq.Carrier
FROM dbo.EMPLOYEES AS E LEFT OUTER JOIN dbo.EMPLOYEES_EQUIP AS empeq ON empeq.EmployeeID = E.EmployeeID LEFT OUTER JOIN dbo.EQUIPMENT AS eq ON eq.EquipID = empeq.EquipID LEFT OUTER JOIN dbo.EQUIP_TYPE AS eqtype ON eqtype.EquipTypeID = eq.EquipTypeID WHERE E.EmployeeID = @EmployeeID
ELSE
SELECT E.FirstName AS UserFirstName, E.LastName AS UserLastName, eqtype.Description AS UserEquipType, empeq.UserEquipID, E.EmployeeID, E.cwopa_id, eq.IPAddress, eq.Location, eq.DataLine3, eq.DataLine2, eq.Voice, eq.DataLine1, eq.FloorBox, eq.Comments, eq.SerialNo, eq.Model, eq.Brand, eq.TagNo, eq.PurchaseLease, eq.WarrantyExpDate, eq.PhoneType, eq.PhoneNum, eq.CellNumber, eq.DataNumber, eq.SIDNumber, eq.Carrier
FROM dbo.EMPLOYEES AS E LEFT OUTER JOIN dbo.EMPLOYEES_EQUIP AS empeq ON empeq.EmployeeID = E.EmployeeID LEFT OUTER JOIN dbo.EQUIPMENT AS eq ON eq.EquipID = empeq.EquipID LEFT OUTER JOIN dbo.EQUIP_TYPE AS eqtype ON eqtype.EquipTypeID = eq.EquipTypeID WHERE E.EmployeeID = @EmployeeID and eq.SerialNo=@SerialNoGO
Also, when a user selects the select button in either Employee search or Equipment search it redirects them to info.aspx. Should I create a different aspx page for both? But I don't believe I should do that. I don't know if I gave you enough information or not. But if you could give examples that would be wonderful! Thanks so much Nickie
View 1 Replies
View Related
Aug 30, 2000
I want to know when does SQL flushes Store Procedure from the cache.
Thank You,
Piyush Patel
View 1 Replies
View Related
Dec 10, 2004
Hi, All,
I need to write a sales report which needs to seperate total from direct sale and agentsale. The report looks like this( in the table of query,we have agentnumber, productname, sales, month
Month salefromagent directsale total
Jan 1100 2300 3400
Feb 800 500 1300
..........
Dec
---------------------------------
I know we can handle this in the program use two queries.
But is there a way to do it use store procedure and then pass the result of store procedure to the ASP program. I am trying to write my first store procedure, thanks for any clue.
Betty
View 1 Replies
View Related
Nov 1, 2005
Hi all,
I need to write a sales store procedure.
The sales summary is basically group by agentCode.
But the problem is some agents have subagents.
i.e., in the sales table.
one agent 123456 has many subagents whose agentCode start with 17. And I want to group sales for all subagents who have agentCode 17XXXX to agent 123456's sales.
what should I do in the store procedure.
Thanks
Betty.
View 2 Replies
View Related
Jan 14, 2005
I am trying to create a store procedure that look at a table and only maintain 30 worth of data only forever. The data that fall outside the 30 days need to be deleted. Can anyone help me with this?
Thanks
Lystra
View 5 Replies
View Related
Feb 22, 2006
I would like to create a employee store procedure to insert a record and mean while i can retrieve the EmployeeID for the record just inserted. Can you show me how to create a store procedure like this. Now i have a insert store procedure in the following:
CREATE PROCEDURE AddEmployee
(@efname nvarchar(20),
@elname nvarchar(20)
)
AS
insert into tblEmployeeName
(EmployeeFName, EmployeeLName)
values (@efname,@elname)
GO
Thanks.
View 5 Replies
View Related
Mar 13, 2006
I created a batch file to run a DTS saved as a STRUCTURED STORE FILE. Works fine on the command promt.
Can I use a SPROC to call something like a shell command to execute that batch file? If yes, how is this be possible?
Thanks
View 2 Replies
View Related
Apr 20, 2004
This is an Oracle store procedure. Can Any body help me to convert it into SQL Server stored Procedure
PROCEDURE CALC_PERC (DB_ID IN NUMBER, LAT_TYPE IN CHAR) IS
Tot_work_all number(12,2);
Bid_tot number(12,2);
Ewo number(12,2);
Overruns number(12,2);
Underruns number(12,2);
Contr_tot_all number(12,2);
sContractType ae_contract.contr_type%type;
BEGIN
select sum(nvl(tamt_ret_item,0) + nvl(tamt_paid_item,0))
into Tot_work_all
from valid_item
Where db_contract = db_id;
Select sum(Contq * Contr_Price) into Bid_tot
From Valid_item
Where nvl(New_Item,'N') <> 'Y'
and db_contract = db_id;
Select sum(Qtd * Contr_price) into Ewo
From Valid_item
Where nvl(New_item,'N') = 'Y'
and db_contract = db_id;
Select Sum((Qtd-Nvl(Projq,0))*Contr_Price) into Overruns
From Valid_item
Where Qtd > Nvl(Projq,0)
and db_contract = db_id
and nvl(New_Item,'N') = 'N';
IF LAT_type <> 'R' THEN
Select Sum((Nvl(Projq,0)-Contq) * Contr_Price) into Underruns
From Valid_item
Where Nvl(Projq,0) < Contq
and db_contract = db_id
and nvl(New_Item,'N') = 'N';
ELSE
Select Sum((Nvl(Qtd,0)-Contq) * Contr_Price) into Underruns
From Valid_item
Where Nvl(Qtd,0) < Contq
and db_contract = db_id
and nvl(New_Item,0) = 'N';
end if;
Contr_tot_all:= NVL(Bid_tot,0) +NVL(ewo,0) +NVL(overruns,0)
+NVL(underruns,0);
IF Contr_tot_all = 0 THEN
Select Contr_type into sContractType from ae_contract where db_contract = db_id;
IF sContractType = 'A' OR sContractType = 'T' THEN
--If the divisor is zero here, it's not an error.
update ae_contract set perc_compu = 0 where db_contract = db_id;
ELSE
--If the divisor is zero here, it would be an error
update ae_contract set perc_compu = 100 * tot_work_all/contr_tot_all where db_contract = db_id;
END IF;
Else
--Here we have a real number to calculate, so go ahead and do your stuff!
update ae_contract set perc_compu = 100 * tot_work_all/contr_tot_all where db_contract = db_id;
END IF;
END;
View 1 Replies
View Related
Apr 4, 2008
1. can a stored procedure call itself? if else how ?>
2. how to run a job for a stored procedure to exucte every day.
View 2 Replies
View Related
Apr 17, 2006
hello
iam new to store procedures.can anyone tell me how do i put in this sql statement into store procedure
SELECT * FROM PortMaster WHERE PortCode= '" & Request.QueryString("PortCode") & "' "
TheProblem is coming in ,how do i put "Request.QueryString("PortCode")" into sql queranalyzer.iam using this in .aspx page.
depending on querystring the record is selected.
View 13 Replies
View Related
Apr 20, 2006
hello
iam using store procedure to open the the selected rows in datagrid into Excel.but iam getting blank spreadsheet.the querystrings are getting passed but the rows turn out to be blank.
if i do not use store procedure than everything is ok.the querystring contains multiple strings so as to display it in excel.
the stroe procedure is
CREATE PROCEDURE Employee_ExcelDisplayHO(@ID varchar(100))
AS
SELECT * FROM employee_master WHERE empuser_id IN (@ID)
and this is the statement that i use in my .aspxpage to call store procedure
Dim Cmd As New SqlDataAdapter("Employee_ExcelDisplayHO", myconn)
cmd.SelectCommand.CommandType = CommandType.StoredProcedure
cmd.SelectCommand.Parameters.Add(New SqlParameter("ID", SqlDbType.VarChar, 100))
cmd.SelectCommand.Parameters("@ID").Value = Request.QueryString("ID")
any suggestions wht may be wrong
View 3 Replies
View Related
May 24, 2006
iam using store procedure to return certain no. of columns frm table.the query is
SELECT empuser_id,FullName,CAddress,PAddress,PhResidence,Mobile FROM employee_master WHERE empuser_id IN (" & txtID.Text & ")
i return it to datagrid in my .aspx(using VB.net) page.but i am getting blank datagrid. when i write the above query in my codebehind it runs normally and datagrid is populated with records.
i tried this in query analyzer as well it runs normally returing rows.
only in store procedure it gives me blank record.
any suggestions what is wrong ?
View 11 Replies
View Related
Dec 22, 2007
hello sir
i want to write store procedure.
I write following code--
drop Proc Analyst
CREATE PROC Analyst
@UserID varchar(20),
@StockName varchar(50)
AS
INSERTtAnalystAssignHistory
(
AnalystAssignHistoryCode,
SecurityCode,
ISIN,
StockName,
UserID,
IsDummyEnabled,
AnalystAssignDate,
StatusCode,
CreatedBy,
CreateDate,
UpdatedBy,
UpdateDate
)
SELECTCOALESCE((SELECT MAX(AnalystAssignHistoryCode) FROM tAnalystAssignHistory), 0) + 1,
SecurityCode,
ISIN,
StockName,
'ShahVis',
IsDummyEnabled,
AnalystAssignDate,
'A',
'Gayatri',
GETDATE(),
NULL,
NULL
FROMtAnalystAssignHistory
WHEREUserId = @UserID
and StockName = @StockName
GO
EXEC Analyst'PatelAmi','Gujarat Ambuja Cements Ltd.'
In this procedure i want to runtime insert ShahVis i.e REassignuserid. it will always change so i want runtime insert this field.
and created by this is store in globaly i want to retrive this runtime.
Please help me.
View 6 Replies
View Related
Jul 20, 2005
I am trying to loop through a string of ID's and check if theproductname for the ID is 'Chai' if so change it to 'Tea'. This is inthe northwind db - products table. call it exec sp_UpdateProduct'1,2,3'It does not work, any ideas - syntax, etc....CREATE PROCEDURE dbo.sp_UpdateProduct@IDs varchar(200)ASBEGINdeclare @sStr1 varchar(200)declare @iStrLen1 intdeclare @sParseElm1 char(2)declare @sStatus varchar(200)declare @count intset @sStr1= @IDsset @iStrLen1= len(@sStr1)SET @count = 0while charindex(',',@sStr1) <> 0beginselect @sParseElm1 = substring(@sStr1,1,CHARINDEX(',',@sStr1 ) - 1)set @sStatus = 'select productname from products where productid='+@sParseElm1if @sStatus = 'CHAI'update products set productname = 'TEA'elseupdate products set productname = 'CHAI'set @sStr1 = substring(@sStr1, CHARINDEX(@sStr1,',') + 1, @iStrLen1)endendGO
View 1 Replies
View Related
Apr 4, 2008
Hi,
I follow the example for store procedure from this link to deal with large amount of data and it work great.
http://www.4guysfromrolla.com/webtech/042606-1.shtml
CREATE PROCEDURE [dbo].[usp_PageResults_NAI]
(
@startRowIndex int,
@maximumRows int
)
AS
DECLARE @first_id int, @startRow int
-- A check can be added to make sure @startRowIndex isn't > count(1)
-- from employees before doing any actual work unless it is guaranteed
-- the caller won't do that
-- Get the first employeeID for our page of records
SET ROWCOUNT @startRowIndex
SELECT @first_id = employeeID FROM employees ORDER BY employeeid
-- Now, set the row count to MaximumRows and get
-- all records >= @first_id
SET ROWCOUNT @maximumRows
SELECT e.*, d.name as DepartmentName
FROM employees e
INNER JOIN Departments D ON
e.DepartmentID = d.DepartmentID
WHERE employeeid >= @first_id
ORDER BY e.EmployeeID
SET ROWCOUNT 0
GO
my problem is how do i do the Sort for this.
Any help would be appreciated.
Thanks
Ddee
View 4 Replies
View Related
