Complex Pivot
May 12, 2008
I have a table likw below
Consumer_ID Exam 1 / 2 Result
A 1 2
A 2 3
B 1 1
B 2 2
C 1 2
C 2 3
D 1 1
D 2 2
E 1 4
E 2 5
I would like to put the sum of count for exam 1 result to Y(row) and exam 2 result to X (column). The exam result will have values from 0 to 5 ( fixed)
For example, Consumer A has 2 as exam 1 result and 3 as exam 2 result.. And consumer C has the same result .. So I put 2 for 2 (Y) and 3 (X) pivot..
The output should look like below.. How can I do this in T-SQL 2005?
0 1 2 3 4 5
0
1 2
2 2
3
4 1
5
View 1 Replies
ADVERTISEMENT
May 12, 2008
Consumer_ID Exam 1 / 2 Result
A 1 2
A 2 3
B 1 1
B 2 2
C 1 2
C 2 3
D 1 1
D 2 2
E 1 4
E 2 5
I would like to put the sum of count for exam 1 result to Y(row) and exam 2 result to X (column). The exam result will have values from 0 to 5 ( fixed)
For example, Consumer A has 2 as exam 1 result and 3 as exam 2 result.. And consumer C has the same result .. So I put 2 for 2 (Y) and 3 (X) pivot..
The output should look like below.. How can I do this in T-SQL 2005?
0 1 2 3 4 5
0
1 2
2 2
3
4 1
5
View 5 Replies
View Related
May 12, 2008
How go I pivot this data? Field MNGR should became columns and GATE used as data for pivot.
CustomerID CaseID DeptID MNGR GATE
1 278 58 SMITH JAX
1 278 58 GREEN ATL
1 278 58 PITTMAN LBC
1 278 20 COLE MCH
1 278 20 MANN ATL
It should look like this:
CustomerID CaseID DeptID SMITH GREEN PITTMAN COLE MANN
1 278 58 JAX ATL LBC null null
1 278 20 COLE MCH null MCH ATL
View 2 Replies
View Related
Nov 12, 2003
I have web forms with about 10-15 optional search parameters (fields) for a give table. Each item (textbox) in the form is treated as an AND condition.
Right now I build complex WHERE clauses based on wheather data is present in a textbox and AND each one in the clause. Also, if a particular field is "match any word", i get a ANDed set of OR's. As you can imagine, the WHERE clause gets quite large.
I build clauses like this (i.e., 4 fields shown):
SELECT * from tableName WHERE (aaa like '%data') AND (bbb = 'data') AND (ccc like 'data%') AND ( (xxx like '%data') OR (yyy like '%data%') )
My question is, are stored procedures better for building such dynamic SQL clauses? I may have one field or all fifteen. I've written generic code for building the clauses, but I don't know much about stored procedures and am wondering if I'm making this more difficult on myself.
View 7 Replies
View Related
May 19, 2006
Hi all,
In MyDatabase, I have a TABLE dbo.LabData created by the following SQLQuery.sql:
USE MyDatabase
GO
CREATE TABLE dbo.LabResults
(SampleID int PRIMARY KEY NOT NULL,
SampleName varchar(25) NOT NULL,
AnalyteName varchar(25) NOT NULL,
Concentration decimal(6.2) NULL)
GO
--Inserting data into a table
INSERT dbo.LabResults (SampleID, SampleName, AnalyteName, Concentration)
VALUES (1, 'MW2', 'Acetone', 1.00)
INSERT €¦ ) VALUES (2, 'MW2', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (3, 'MW2', 'Trichloroethene', 20.00)
INSERT €¦ ) VALUES (4, 'MW2', 'Chloroform', 1.00)
INSERT €¦ ) VALUES (5, 'MW2', 'Methylene Chloride', 1.00)
INSERT €¦ ) VALUES (6, 'MW6S', 'Acetone', 1.00)
INSERT €¦ ) VALUES (7, 'MW6S', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (8, 'MW6S', 'Trichloroethene', 1.00)
INSERT €¦ ) VALUES (9, 'MW6S', 'Chloroform', 1.00)
INSERT €¦ ) VALUES (10, 'MW6S', 'Methylene Chloride', 1.00)
INSERT €¦ ) VALUES (11, 'MW7', 'Acetone', 1.00)
INSERT €¦ ) VALUES (12, 'MW7', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (13, 'MW7', 'Trichloroethene', 1.00)
INSERT €¦ ) VALUES (14, 'MW7', 'Chloroform', 1.00)
INSERT €¦ ) VALUES (15, 'MW7', 'Methylene Chloride', 1.00)
INSERT €¦ ) VALUES (16, 'TripBlank', 'Acetone', 1.00)
INSERT €¦ ) VALUES (17, 'TripBlank', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (18, 'TripBlank', 'Trichloroethene', 1.00)
INSERT €¦ ) VALUES (19, 'TripBlank', 'Chloroform', 0.76)
INSERT €¦ ) VALUES (20, 'TripBlank', 'Methylene Chloride', 0.51)
GO
A desired Pivot Table is like:
MW2 MW6S MW7 TripBlank
Acetone 1.00 1.00 1.00 1.00
Dichloroethene 1.00 1.00 1.00 1.00
Trichloroethene 20.00 1.00 1.00 1.00
Chloroform 1.00 1.00 1.00 0.76
Methylene Chloride 1.00 1.00 1.00 0.51
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
I write the following SQLQuery.sql code for creating a Pivot Table from the Table dbo.LabData by using the PIVOT operator:
USE MyDatabase
GO
USE TABLE dbo.LabData
GO
SELECT AnalyteName, [1] AS MW2, AS MW6S, [11] AS MW7, [16] AS TripBlank
FROM
(SELECT SampleName, AnalyteName, Concentration
FROM dbo.LabData) p
PIVOT
(
SUM (Concentration)
FOR AnalyteName IN ([1], , [11], [16])
) AS pvt
ORDER BY SampleName
GO
////////////////////////////////////////////////////////////////////////////////////////////////////////////////
I executed the above-mentioned code and I got the following error messages:
Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'TABLE'.
Msg 207, Level 16, State 1, Line 1
Invalid column name 'AnalyteName'.
I do not know what is wrong in the code statements of my SQLQuery.sql. Please help and advise me how to make it right and work for me.
Thanks in advance,
Scott Chang
View 6 Replies
View Related
Jul 8, 2015
I have two data tables:
1) Production data with column headers: Key, Facility, Line, Time, Output
2) Costs data with column headers: Key, Site, Cost Center, Time, Cost
The tables have a common key named obviously as Key. The data looks like this:
Key
Facility
Line
Time
Output
Alpha
I would like to have two pivot tables which I can filter with ONE slicer based on the column Key. The first pivot table shows row labels Facility, Line and column labels Time. Value field is Output. The second pivot table shows row labels Site, Cost Center, and column lables Time. Value field is Cost.How can I do this with Power Pivot? I tried by linking both tables above to a table with unique Keys in PowerPivot and then creating a PivotTable where I would have used the Key from the Keys table.
View 5 Replies
View Related
Oct 13, 2015
Can I force the following measure to be visible for all rows in a pivot table?
Sales Special Visibility:=IF(
  HASONEVALUE(dimSalesCompanies[SalesCompany])
  ;IF(
    VALUES(dimSalesCompanies[SalesCompany]) = "Sales"
    ;CALCULATE([Sales];ALL(dimSalesCompanies[SalesCompany]))
    ;[Sales]
  )
  ;BLANK()
)
FYI, I also have other measures as well in the pivot table that I don't want to affect.
View 3 Replies
View Related
Oct 14, 2015
I have a simple pivot table (screenshot below) that has two variables on it: one for entry year and another for 6 month time intervals. I have very simple DAX functions that count rows to determine the population N (denominator), the number of records in the time intervals (numerator) and the simple percent of those two numbers.
The problem that I am having is that the function for the population N is not overriding the time interval on the pivot table when I use an ALL function to do so. I use ALL in other very simple pivot tables to do the same thing and it works fine.
The formula for all three are below, but the one that is the issue is the population N formula. Why ALL would not work, any other way to override the time period variable on the pivot table.
Population N (denominator):
=CALCULATE(COUNTROWS(analyticJudConsist),ALL(analyticJudConsist[CurrentTimeInCare1]))
Records in time interval (numerator):
=COUNTROWS(analyticJudConsist)
Percent:
=[countrows]/[denominatorCare]
View 13 Replies
View Related
Aug 17, 2015
How can I apply "Min" formula under a "new measure" (calculated field) within a pivot table under Power pivot 2010?Can see that neither does it allow me to apply "min" formula directly "formula box" nor could find any other option.Intent formula: "=Min(1,sum(a:b))" this isn't allowed so all I can do is "=sum(a:b)".
View 3 Replies
View Related
Mar 11, 2015
I have simple pivot table (below screenshot with info redacted) that displays a population number ("N" below), this is the denominator, a cumulative numerator number (below "#") and a simple cumulative percent that just divides the numerator by the denominator. It cumulates from top to bottom. The numerator and percent are cumulative using the below functions. There are two problems with the numerator and percent:
1. When there is not a number for the numerator, there is no value displayed for both the numerator and the percent..There should be a zero displayed for both values.
2. When there has been a prior number for the numerator and percent (for a prior month interval) but there is no number for the numerator in the current month interval, the prior month number and percent are not displayed in the current month interval--see the 3rd yellow line, this should display "3" and "16.7%" from the second yellow line.Here is the formula for the numerator:
=CALCULATE(count(s1Perm1[entity_id]),FILTER(ALL(s1Perm1[ExitMonthCategory]),s1Perm1[ExitMonthCategory] <= MAX(s1Perm1[ExitMonthCategory])))
Here is the formula for the percent:
=(CALCULATE(countrows(s1Perm1),FILTER(ALL(s1Perm1[ExitMonthCategory]),s1Perm1[ExitMonthCategory] <= MAX(s1Perm1[ExitMonthCategory]))))/(CALCULATE(COUNTROWS(s1Perm1),ALL(s1Perm1[Exit],s1Perm1[ExitMonthCategory])))
View 24 Replies
View Related
Sep 18, 2015
I have data in my Powerpivot window which was generated by a sql query. This data includes a field named 'Cost' and every row shows a value for 'Cost' greater than zero. The problem is that when I display this data in the pivot table all entries for Cost display as $0. At first I thought that maybe Cost was set to a bogus data type (such as 'text) but it is set to ''Decimal Number' so that's not the problem.Â
What is happening and how do I fix it so that my pivot table reflects the values for 'Cost'?
View 3 Replies
View Related
Nov 23, 2015
I have a data table that contains budget and actual data by month. Â I use the data to create a pivot that shows actual results next to budgeted results. Â I need a column that shows that variance between those columns. Â I think my issue is that the "Type" field contains actual and Budget. Â I sum on "Type". Â I can't seem to create a sum since those items are in the same field or am I missing something?
Table design
Month|Division|Subdivision|Type|Dept|Rate|Units|Amount
October|DC|Day|Budget|125|10.00|100|1000
October|DC|Day|Actual|125|10.00|110|1100
Output Design
DC
DAY
Actual
Budget
125 AvgOfRate
AvgOfRate
SumOfUnits
SumOfUnits
SumOfAmt
SumOfAmt
View 4 Replies
View Related
Oct 9, 2015
How to get a list of values to actually display in correct order in either a slicer or when on an axis on a pivot table?
I currently have the below list and have tried to add a preceding numeric (ex. "1. <=0") or preceding blank space, neither of which is visually great. Is there another way?
<= 0
1 - 6
7 - 12
13 - 18
19 - 24
25 - 30
31 - 36
37 - 42
43 - 48
49 - 54
55 - 60
61 - 66
67 - 72
73 - 78
79 - 84
85 - 90
91 - 96
97 - 102
> 102
View 8 Replies
View Related
Apr 13, 2015
I am using excel 2010 and creating pivot table from Power Pivot. I created a pivot table with department slicers. All is good, the problem I am having is whilst in an unfiltered position (ALL) of the slicers (departments) I get 200 pages, now when I click on a given department with say 10 pages, I still get the same 200 pages with the first 10 pages showing the data from the clicked department and 190 blank pages.
All I want is to get a WYSIWYG (What you see is what you get) of what is on the screen as my print, but I am getting extra blank pages right after the data. Â How do I resolve this.
Below are the steps I go thru to printÂ
1. Select slicers in unfiltered position (ALL)
2. Select entire pivot table
3. Select Page layout and select print area.
4. Save
5. Click on Print Preview to preview the print
6. Click on a given department in the slicer and repeat item 5, but this gives me blank pages after the data.
Do I need any other step?Â
View 2 Replies
View Related
Jul 5, 2006
I am using the pivot task to to a pivot of YTD-Values and after that I use derived columns to calculate month values and do a unpivot then.
All worked fine, but now I get this error message:
[ytd_pivot [123]] Error: Duplicate pivot key value "6".
The settings in the advanced editor seem to be correct (no duplicate pivot key value) and I am extracting the data from the source sorted by month.
Could it be a problem that I use all pivot columns (month 1 to 12) in the derived colum transformation and they aren´t available at this moment while data extracting is still going on?
any hints?
Cheers
Markus
View 3 Replies
View Related
Sep 21, 2007
Say, I have the following temporary table (@tbl) where the QuestionID field will change values over time
Survey QuestionID Answer
1 1 1
1 2 0
2 1 1
2 2 2
I'd like to perform a pivot on it like this: select * from @tbl Pivot (min(Answer) for QuestionID in ([1], [2])) as PivotTable
...however, I can't just name the [1], [2] values because they're going to change.
Instead of naming the values like this:
for QuestionID in ([1], [2], [3], [4])
I tried something like this:
for QuestionID in (select distinct QuestionID from @tbl)
but am getting a syntax error. Is it possible to set up a pivot like this:
select * from @tbl Pivot (min(Answer) for Question_CID in (select distinct @QuestionID from @tbl)) as PivotTable
or does anyone know another way to do it?
View 3 Replies
View Related
Jul 8, 2015
Is it possible to generate automatic refresh of excel 2013 table which displays some table of a power pivot model on file open?? I dont want to use pivottable (which supports this ...)
View 2 Replies
View Related
Apr 29, 2015
I have a pivot table that connects to our data warehouse via a PowerPivot connection. Â The data contains a bunch of comment fields that are each between 250 and 500 characters. Â I've set the columns in this pivot table to have the 'Wrap Text' set to true so that the user experience is better, and they can view these comment fields more clearly.
However, whenever I refresh the data, the text wrapping un-sets itself. Â Interestingly, the 'Wrap Text' setting is still enabled, but I have to go and click it, then click it again to actually wrap the text. Â This is very burdensome on the user, and degrading the experience.
Any way to make this text wrapping stick so that I don't have to re-set it every time I refresh the data?
View 2 Replies
View Related
Apr 26, 2006
Hello,
Lets look at this table :
CREATE TABLE [dbo].[TableHisto](
[Id] [int] NOT NULL,
[Week] [nvarchar](50) COLLATE French_CI_AS NULL,
[Project] [int] NOT NULL
) ON [PRIMARY]
GO
EXEC sys.sp_addextendedproperty @name=N'MS_Description', @value=N'Identifiant d''enregistrement' ,@level0type=N'SCHEMA', @level0name=N'dbo', @level1type=N'TABLE', @level1name=N'TableHisto', @level2type=N'COLUMN', @level2name=N'Id'
GO
EXEC sys.sp_addextendedproperty @name=N'MS_Description', @value=N'Date de l''enregistrement' ,@level0type=N'SCHEMA', @level0name=N'dbo', @level1type=N'TABLE', @level1name=N'TableHisto', @level2type=N'COLUMN', @level2name=N'Week'
GO
EXEC sys.sp_addextendedproperty @name=N'MS_Description', @value=N'Projet de référence' ,@level0type=N'SCHEMA', @level0name=N'dbo', @level1type=N'TABLE', @level1name=N'TableHisto', @level2type=N'COLUMN', @level2name=N'Project'
It is a table where i store projects week reports.
I want to make a request to display a table with project ID in Row, Weeks in columns and either TableHisto.id or Null value in cell.
I use SQL 2005. Thanks for any help
View 9 Replies
View Related
Sep 3, 2006
I need some help on how to structure a sql statement. I am creating a membership directory and I need the stored procedure to output the Last Name, First Name (and if married) Spouse First Name. Like this Flinstone, Fred & Wilma All members are in one directory linked by two fields. [Family ID] all the family members have the same family id and then there is a Family position id that shows if they are the Husband, Wife or Kids. I have no problem with this part select (LastName + ',' + FirstName) as Name, [Phone 1] as Phone, [Unit Name] as WD, [Street 1] as Street, SUBSTRING(City,1,3) as City, SUBSTRING(Postal,1,5) as Zipfrom Membership Where [HH Order]=1 Order By LastName ASC Could someone help me on how to display the " & Spouse FirstName " as part of the name field only if there is a spouse [HH Order]=2 for the current [Family ID]????
View 6 Replies
View Related
Nov 13, 2006
I need to get multiple values for each row in a database, then do a calculation and insert the calculation and the accountnumber related to the calculation the data, into a different column. I get an error trying it this way...there is no real identifier, it is jsut something that needs to get done per row...any ideas on how I can accomplish this?
Declare @NetCommission decimal
Declare @AccountNumber varchar(50)
Set @NetCommission = (select (CommissionRebate * Quantity)
from Account A
Join Trades T on A.AccountNumber = T.AccountNumber)
Set @AccountNumber = (select A.AccountNumber
from cmsAccount A
Join Trades T on A.AccountNumber = T.AccountNumber)
Insert into Transaction
(
Payee
,Deposit
,AccountNumber
)
Values
(
'Account Credit'
,@NetCommission
,@AccountNumber
)
View 13 Replies
View Related
Dec 1, 2006
Hello,
could someone help with this query in a stored proc.?
SET @SQL = 'SET ''' + @avgwgt + ''' = '
'(SELECT AVG(AverageWeight)
FROM CageFishHistory where CageID IN (' + @cagearray + ')
and ItemDate =''' + CONVERT(varchar(23),@startdate) + ''')'
EXEC @SQL
I'm trying to get an average value across dynamically selected rows. (I'm using a list array to deliver the selection to the stored proc). I need to re-use the average value within the procedure,so it's not enough to output it as a column of the resultset - EG. 'Select AVG(AverageWeight) as AvgWgt' . If I take out the @avgwgt line it works fine, but otherwise I'm getting this error:
"Incorrect syntax near '(SELECT AVG(AverageWeight)
FROM CageFishHistory where CageID IN ('."
It may be that I can access a column of the resultset in the rest of the procedure, and that would help avoid the use of pesky apostrophes, but I don't know how to do it.
View 3 Replies
View Related
Jan 6, 2007
I've written a lot of queries in the past, but I'm having a lot of trouble with this one.
View 4 Replies
View Related
Mar 19, 2007
I'm sure there is a way of cracking this, but I can't think of a good solution. Right now I am not happy with the solutions I come up with, one of which takes 4 minutes to run on SQL Server
The scenario: User is presented with search page where one or more search terms can be entered/selected. There are no required parameters. It can be any or all of the possibilities presented. Below is a model of the search parameters presented.
The user will either select to show more options under Profile ABC, or go down to Profile STU or Profile XYZ to show more options, or even select all Profiles and then select from Type 1 and either a. or. b. or. c. or ALL of the above.
I cannot predict what a user will make part of the search query so I have to have a stored procedure ready which can handle any or all of the parameters a user may select.
Am I biting off more than I can chew (it seems so)? Or is there an elegant way of handling the unknown combination of search parameters that a user might throw into my sql query?
I'm running this under ASP 1.0 and SQL Server 2000.
[check to show the options below] Profile ABC
[check to shore more options] Type 1
A. Contains fields for entering another data string and selecting from drop-down boxes
B. ditto
C. ditto
D. ditto
[check to show more options] Type 2
A. Contains fields for entering another data string and selecting from drop-down boxes
B. ditto
C. ditto
D. ditto
[check to show more options] Type 3
A. Contains fields for entering another data string and selecting from drop-down boxes
B. ditto
C. ditto
D. ditto
[check to select more options] Type 4
A. Contains fields for entering another data string and selecting from drop-down boxes
B. ditto
C. ditto
D. ditto
[check to show more options] Profile XYZ (as above)
[check to select more options] Profile STU (as above)
View 6 Replies
View Related
Sep 7, 2007
I'm working on a system that used to load control dynamically into a table structure based on "Row" and "Column" properties in the item object.
The system is now being revamped, and instead of a table structure, it's being loaded into a list, which will be controled by css. The new relevant variables are "Sequence" and "Width."
Since there are already thousands of existing items in the database, I have to write a script that can take a really good guess at legacy items' Row and Col, and input values for Sequence and Width.
Since all items exist on "tabs," I can query for all items on a given tabID, Ordered By Row, Col -- that will give me a sequence.
Width isn't literal, it has 6 presets: Whole, Half, Third, Quarter, Two Thirds, Three Quarters, represented in the table as 0,1,2,3,4,5 -- for our purposes, I'll assume that all items on a row are equal in width. We can determine width by figuring out the number of items within the same row, so if there is only one in the row, it's a Whole (0), if there are three in the row it'll be a Third (2), etc.
I'd like to create a query that gets all items by tab, assigns the appropriate sequence, and figures out how many items are in the row with a given item, to assign the correct width.... but I have no idea how to make t-sql do that. I don't mind multiple queries to get the whole process done, and it doesn't need to be efficient -- this is a one-off script to run to give legacy items values that we can work with.
Where would I start?
View 1 Replies
View Related
Oct 30, 2007
HI.
I have 3 tables
1- std with : stdID , programID.
2- Programs with :ProgramID , Cost
3 - Movements with : stdID , balance.
the first table contain the stdID and ProgramID , some times the std hasn't programID that mean he hasn't programID. then we return null.
if the std has programID there is to cases.
the first one he have a movement on his balance then we get the biggest balance for the std.
the second case he hasn't any moventen then we get his balance from Programs table by the ProgramID .
I need sql server function that return table like this
stdID , Balance
that means every std with his Balance.
Regards.
View 11 Replies
View Related
May 13, 2008
This is too complex anyone know how to make it less complex.
I am trying to get all the selected fields from contacts into a datagrid where the other fields contain a string in textbox1.
This works
SELECT [company], [contactname], [emailaddress], [secondemailaddress], [phonenumber], [webpage] FROM [contacts] WHERE (([AB] LIKE '%' + ? + '%') AND ([AL] LIKE '%' + ? + '%'))
When i add all the rest of the fields it says its too complex. Please Help
SELECT [company], [contactname], [emailaddress], [secondemailaddress], [phonenumber], [webpage] FROM [contacts] WHERE (([AB] LIKE '%' + ? + '%') AND ([AL] LIKE '%' + ? + '%') AND ([B] LIKE '%' + ? + '%') AND ([BB] LIKE '%' + ? + '%') AND ([BD] LIKE '%' + ? + '%') AND ([BA] LIKE '%' + ? + '%') AND ([BH] LIKE '%' + ? + '%') AND ([BL] LIKE '%' + ? + '%') AND ([BN] LIKE '%' + ? + '%') AND ([BR] LIKE '%' + ? + '%') AND ([BS] LIKE '%' + ? + '%') AND ([BT] LIKE '%' + ? + '%') AND ([CA] LIKE '%' + ? + '%') AND ([CB] LIKE '%' + ? + '%') AND ([CF] LIKE '%' + ? + '%') AND ([CH] LIKE '%' + ? + '%') AND ([CM] LIKE '%' + ? + '%') AND ( LIKE '%' + ? + '%') AND ([CR] LIKE '%' + ? + '%') AND ([CT] LIKE '%' + ? + '%') AND ([CV] LIKE '%' + ? + '%') AND ([CW] LIKE '%' + ? + '%') AND ([DA] LIKE '%' + ? + '%') AND ([DD] LIKE '%' + ? + '%') AND ([DE] LIKE '%' + ? + '%') AND ([DG] LIKE '%' + ? + '%') AND ([DH] LIKE '%' + ? + '%') AND ([DL] LIKE '%' + ? + '%') AND ([DN] LIKE '%' + ? + '%') AND ([DT] LIKE '%' + ? + '%') AND ([DY] LIKE '%' + ? + '%') AND ([E] LIKE '%' + ? + '%') AND ([EC] LIKE '%' + ? + '%') AND ([EH] LIKE '%' + ? + '%') AND ([EN] LIKE '%' + ? + '%') AND ([EX] LIKE '%' + ? + '%') AND ([FK] LIKE '%' + ? + '%') AND ([FY] LIKE '%' + ? + '%') AND ([G] LIKE '%' + ? + '%') AND ([GL] LIKE '%' + ? + '%') AND ([GU] LIKE '%' + ? + '%') AND ([GY] LIKE '%' + ? + '%') AND ([HA] LIKE '%' + ? + '%') AND ([HD] LIKE '%' + ? + '%') AND ([HG] LIKE '%' + ? + '%') AND ([HP] LIKE '%' + ? + '%') AND ( LIKE '%' + ? + '%') AND ([HU] LIKE '%' + ? + '%') AND ([HX] LIKE '%' + ? + '%') AND ([IM] LIKE '%' + ? + '%') AND ([IP] LIKE '%' + ? + '%') AND ([IV] LIKE '%' + ? + '%') AND ([JE] LIKE '%' + ? + '%') AND ([KA] LIKE '%' + ? + '%') AND ([KT] LIKE '%' + ? + '%') AND ([KW] LIKE '%' + ? + '%') AND ([KY] LIKE '%' + ? + '%') AND ([L] LIKE '%' + ? + '%') AND ([LA] LIKE '%' + ? + '%') AND ([LD] LIKE '%' + ? + '%') AND ([LE] LIKE '%' + ? + '%') AND ([LL] LIKE '%' + ? + '%') AND ([LN] LIKE '%' + ? + '%') AND ([LS] LIKE '%' + ? + '%') AND ([LU] LIKE '%' + ? + '%') AND ([M] LIKE '%' + ? + '%') AND ([ME] LIKE '%' + ? + '%') AND ([MK] LIKE '%' + ? + '%') AND ([ML] LIKE '%' + ? + '%') AND ([N] LIKE '%' + ? + '%') AND ([NE] LIKE '%' + ? + '%') AND ([NG] LIKE '%' + ? + '%') AND ([NN] LIKE '%' + ? + '%') AND ([NP] LIKE '%' + ? + '%') AND ([NR] LIKE '%' + ? + '%') AND ([NW] LIKE '%' + ? + '%') AND ([OL] LIKE '%' + ? + '%') AND ([OX] LIKE '%' + ? + '%') AND ([PA] LIKE '%' + ? + '%') AND ([PE] LIKE '%' + ? + '%') AND ([PH] LIKE '%' + ? + '%') AND ([PL] LIKE '%' + ? + '%') AND ([PO] LIKE '%' + ? + '%') AND ([PR] LIKE '%' + ? + '%') AND ([RG] LIKE '%' + ? + '%') AND ([RH] LIKE '%' + ? + '%') AND ([RM] LIKE '%' + ? + '%') AND ([S] LIKE '%' + ? + '%') AND ([SA] LIKE '%' + ? + '%') AND ([SE] LIKE '%' + ? + '%') AND ([SG] LIKE '%' + ? + '%') AND ([SK] LIKE '%' + ? + '%') AND ([SL] LIKE '%' + ? + '%') AND ([SM] LIKE '%' + ? + '%') AND ([SN] LIKE '%' + ? + '%') AND ([SO] LIKE '%' + ? + '%') AND ([SP] LIKE '%' + ? + '%') AND ([SR] LIKE '%' + ? + '%') AND ([SS] LIKE '%' + ? + '%') AND ([ST] LIKE '%' + ? + '%') AND ([SW] LIKE '%' + ? + '%') AND ([SY] LIKE '%' + ? + '%') AND ([TA] LIKE '%' + ? + '%') AND ([TF] LIKE '%' + ? + '%') AND ([TN] LIKE '%' + ? + '%') AND ([TQ] LIKE '%' + ? + '%') AND ([TR] LIKE '%' + ? + '%') AND ([TS] LIKE '%' + ? + '%') AND ([TW] LIKE '%' + ? + '%') AND ([UB] LIKE '%' + ? + '%') AND ([W] LIKE '%' + ? + '%') AND ([WA] LIKE '%' + ? + '%') AND ([WC] LIKE '%' + ? + '%') AND ([WD] LIKE '%' + ? + '%') AND ([WN] LIKE '%' + ? + '%') AND ([WR] LIKE '%' + ? + '%') AND ([WS] LIKE '%' + ? + '%') AND ([WV] LIKE '%' + ? + '%') AND ([YO] LIKE '%' + ? + '%'))
View 10 Replies
View Related
May 20, 2008
hi how are you please help me in my problem which i can't make it.
Now, i have a project in ASP.NET and SQL Server 2005. let's call the project an image gallery, in my project i have a table named "Category" in which all the categories are in this table. also while adding a new category a new table will be created automatically with the name of that category.
now, what i want is that to build a query that reads the contents of the tables that the tables name are the names of the each record in the "Category" table.
is that possible ?
please if any one help can me in my problem.
View 4 Replies
View Related
Feb 10, 2004
I have the following SQL 2000 database table:
NEWS (IDNews, Country, PublishDate, Title)
I have to get a dataset containing only one record for each country, having most recent publish date.
Any suggestions? Thanks.
View 3 Replies
View Related
Feb 8, 2005
I have 2 tables, say table1, and table2. There is a DocID (primary key) in table1. In table2, DocID is the foriegn key. There can be more than 1 DocID.
this is the table structure (sample)
Table 1:
DocID DocName OtherID etc
1 test 2
2 test2 3
Table2:
TblID DocID OtherID
1 1 10
2 1 13
3 1 25
how do I join these two tables, such that I get all the otherID's for each DocID.
ie.,
DocID OtherID
1 2 and 10 and 13 and 25
2 3
i am writing this query to display search results on a search page (with keyword search) and so, if I display the result in more than one row, then the user might think that there is more than document...whereas the case is that there is only one document with more than one other ID's.
is there any way I can do this? display...more than 1otherID in the same row for the same DociD?
Currently, I am using a left outer join of table1 and table2.
An suggestions on how to do this?
View 6 Replies
View Related
Oct 1, 2005
I cant get "order by" to work in this sql query..I use this query:
"SELECT DISTINCT TOP 12 name,total = COUNT(*) FROM products where kat = 'music' group by namn"and I want to add this some where to get 12 random records: "ORDER BY NewID()"I tried this: "SELECT DISTINCT TOP 12 name,total = COUNT(*) FROM products where kat = 'music' group by namn ORDER BY NewID()"" but get the error:"ORDER BY items must appear in the select list if SELECT DISTINCT is specified"I can´t figure out how I should write the query..Somebody have any ideas??/Radiwoi
View 2 Replies
View Related
Apr 11, 2003
Hi,
I need a way to retrieve records from a table with a 30 min interval between the records.
For e.g., Lets say I have the following data in a table :-
userid hitdt
1 4/1/2003 10:00 AM
1 4/1/2003 10:15 AM
1 4/1/2003 10:31 AM
1 4/1/2003 11:10 AM
1 4/1/2003 11:30 AM
1 4/1/2003 11:41 AM
I need a query which would return me the following recordset :-
userId hitId
1 4/1/2003 10:00 AM
1 4/1/2003 10:31 AM
1 4/1/2003 11:10 AM
1 4/1/2003 11:41 AM
Is there a way to do this without using a cursor ?
Thanks
View 7 Replies
View Related
Sep 7, 2003
table_a has patient_id, tran_id and other fields a,b,c
table_b has patient_id,tran_id, key_id
and other fileds d,e,f
table_a patien_id + tran_id is unique
table_b patient_id + tran_id is not unique, could be duplicated.
I have to create a query which will retrieve fields from table a a,b,c and fields d,e from table b where
table a. patient_id + tran_id =
tableb.patient_id + tran_id and table_b.key_id is the min key_id for that patient_id + tran_id.
I should retrieve just one record.
How would I be able to do that?
Please help!!
Thanks
View 2 Replies
View Related
