How to display sql compute sum command their result in amount and qty in report?
I am try this query is successful show the total amount and qty in studio management server and show in screen. But run this query on report is without to show last column of qty and amount, why ?
Hello,I would like to show the result fo each day of the past 30 days. I might not have data to display for everyday but I still want the date to show up01/27/2007 resultA01/28/2007 resultB01/29/2007 .....02/26/2007 resultC02/27/2007 resultD Thanks for your helpArnold
My query produces accurate results just produces one instance for each sales region. I am needing it to only give me one instance of each sales region and give me total counts. What should I re-write?
Code: Select salesmanname, case when [state] IN ('GA', 'FL', 'AL', 'SC', 'NC', 'TN') Then 'South' when [state] IN ('CA', 'NV', 'WA', 'OR', 'TX') Then 'West' when [state IN ('NY', 'NJ', 'PA', 'DL', 'CT') Then 'NE' end As [Sales Region]
I´m creating a report in SSRS 2005 where you can filter after month and year. The result is the total sale for that particular month. What I want to do, is adding an extra column to compare with the result in the same month last year. F.eks. say that I choose january 2008 I would like to see the results for january 2007.
I thought of writing an expression to do that, but as that isn't my stronges side I would appreciate some help
Hi, I have two queries as under:QUERY 1:SELECT * FROM OPENQUERY(MYSERVER, 'SELECT * FROM SCOPE() WHERE FREETEXT(''Text to Search'')') AS DocsQUERY 2:SELECT MediaID, LawID, LawDate, Agreement, Name, NameSearch, LawType, LawNo, RegID, IssueNo, AttachmentFrom Dept_LegalLawINNER JOIN Dept_LegalMinistries ON Dept_LegalLaw.RegID = Dept_LegalMinistries.RegIDINNER JOIN Dept_LegalLawType ON Dept_LegalLaw.LawID = Dept_LegalLawType.LawIDWHERE 1=1 AND 1=1 AND 1=1 AND 1=1 AND 1=1 AND 1=1 AND 1=1 AND 1=1 AND 1=1 AND 1=1both queries are working fine separately and I can generate the desired results separately, but I cannot merge them to get one single result for example, after a FREETEXT search I want to get some values from my local table (Query2) to display as one result. Like in Query1 FREETEXT will search the web page based on the given text and in Query2 will select the remaining data from the local database (Title, ID, Name etc etc).Try many thing but no success yet.Need urgent help.Thanks
I am facing an issue in MDX Query. I have a custom MDX query, When I run the query I am getting results too. Now my requirement is to show the dimension names in the query result, So that I can get those header names in the cell set itself. Please see the below image.
In this image I need to show 'Fiscal Year' and 'Fiscal Quarter' in that highlighted area. Is there any custom query for this?
I'm very new to report builder and I don't even know if this is possible. Some of my users have asked if they can build an ad-hoc report to show say top 50 annual salaries. This has to be done soley with whatever report builder has for building ad-hoc reports as that's all the users have access to.
We have a report published to two report servers ( same configuration). this report displays data in two side by side tables. on server 1, the left side table does not get displayed where as both the tables show fine on server 2.
Since a week we have a strange problem. We are using SQL Server 2005 with SP2 on a Windows Server 2003 updated last time in November. We have 2 servers like this, one is a virtual machine and the second one, a physical one.
Since a week, sometimes, the reports in the web report viewer just don't show. They keep loading for hours without showing anything. Beside, everything's fine, the server has plenty of free resources (CPU, RAM...), Visual Studio works normally, SSMS too. We can even go in http://localhost/reports and http://localhost/reportserver and see the folders, files etc... but when trying to load a report (what ever it is, even a small one) nothing comes, not even the message "Report is loading".
It happens not every day, sometimes two or three times a day at different hours. In the Windows event viewer, nothing. In the SSRS logs, nothing (as far as I can understand these logs).
It looks as if a job or a process was running and was blocking the reports or a service which would stop automatically. To have it work again, a reboot of the server works or within 2 or 3 hours, it comes back to normal state.
If someone has an idea of what can be the problem or some tips, please feel free because we are running out of ideas.
I've designed a report and assigned it a datasource that binds with a SP with a parameter. In the XML code of the dataset I can see the input parameter has been recognised by the wizard. Then, I built a report with that Dataset as the source. Everything is fine till this time. Now through my aspx code I pass on the value of the parameter to the report. But the report doesn't show any values at all. The aspx code is like
Code Snippet Dim reportParameter As New ReportParameter("@UserID", Convert.ToInt32(TextBox1.Text), True) Dim test() As ReportParameter = {reportParameter} ReportViewer1.LocalReport.SetParameters(test)
Any ideas what I could be doing wrong? VS 2005 & SSRS 2005. TIA.
I have two seperate reports that have parameter clientkey in common. I want to show on one report these 2..first the one, then the 2nd below it. I've tried jsut using 2 tables but they overlap. I'm now trying a subreport, but I'm not sure how to do this or even if it is the right method.
I'm currently investigating whether SQL Reporting Services might be the right solution to some reporting requirements I have been given (web reports).
There is a requirement that some of the columns are hidden to begin with and can be shown by clicking on the header of one of the other columns. E.g. There is a list of clients and a "Total Revenue" column, clicking on the "Total Revenue" column header would show an additional 5 or so columns which show a breakdown of different figures that make up the total revenue.
So my question is this: Is it possible to show/hide columns by clicking on the headers of other columns in the report?
I was curious to know if there is a way to create a report that will show when the last time all reports on our server were run. We have a lot of reports on our server made by multiple people that may or may not be in use anymore and we're trying to clean this up a bit. I am currently running SQL Server 2000. I realize there is a history that each report has and I'm wondering if it's possible to pull from that if it is stored somewhere that is accessible. Any help or direction would be much appreciated as I am not even sure where to start.....
I am new to SQL programming and I am trying to figure out how to get a report to show a mismatch in System Names & DNS Names. Both of the columns are in a table called nodes.
System Name router-1-dc and the DNS would be router-1-dc.domain I am trying to find Nodes that don't match to the "." prior to the domain example for this would be System Name "router-1-datacenter" and DNS Name "router-1-dc.domain" I would want this example to show on the report page.
Here is the SQL Query I built however it does not appear to be working as I need it too.
SELECT N. NodeID, N.Caption, N.SysName, N.DNS, N.IP_Address, N.Device_Type FROM ( SELECT Nodes.NodeID, Nodes.Caption, Nodes.SysName, Nodes.DNS, Nodes.Device_Type, Nodes.IP_Address FROM Nodes
Dataset "FromTimeDimension" is a report parameter and has values (yyyymm)= 200601,200602,200603,2000604....... I would like to always have the default for this parameter to always be the latest month...ie November is the most recent month in our cube, so I would want the parameter to default to "200611". However, when I try to use the "last" function, the error says that aggregate function cannot be used.
Hi, I am new to SSRS. Is there a way to show part of a report based on User. Say we have a report consisting data for all department. When a department director view it, the report only display data for his/her department. Can this be achieved in SSRS? Thank you in advance for your help.
I've read posts that state it is impossible to remove the "Show Details" button on the tool bar in Report Manager.
I created a new role assignment for an individual on a folder with the "Browse" role only.
When that individual navigates to the folder and clicks the "Show Details" button, the "Delete" and "Move" buttons also appear on the tool bar, with a checkbox next to each report item.
I can't have a folder where my users have the ability to delete or move my published reports!
Am I missing a setting? Again, the user has the "Browse" role only on the folder.
I created a report with a parameter. The parameter was created using a dataset in the report designer. This works fine. I deployed the report (webhost4life) and the report runs fine in the report manager. I am able to select my casenumber click on the default view report button and it works.
Problem: I embedd the report into an aspx page frmReports1.aspx. I call this page from another page (form). the frmReports.aspx page comes up and displays the default drop down list box with the casenumbers (fine). I select the casenumber and click on the view report button and NOTHING. I here the postbacks taking place but all that happens is the default value appears in the drop down list box and the toolbar shows. I checked permissions and everything is fine. I searched the forum and thought i found the solution with the inLine HTML and Async (still nothing) I can only think that something is not going right with the parameter. Here is my html, and code behind code. any help would be greatly apprcieated.
Public Function GetFormsCredentials(ByRef authCookie As System.Net.Cookie, ByRef userName As String, ByRef password As String, ByRef authority As String) As Boolean Implements Microsoft.Reporting.WebForms.IReportServerCredentials.GetFormsCredentials
End Function
End Class
Public Function GetFormsCredentials(ByRef authCookie As Cookie, _
ByRef userName As String, _
ByRef password As String, _
ByRef authority As String) _
As Boolean
authCookie = Nothing
userName = Nothing
password = Nothing
authority = Nothing
'Not using form credentials
Return False
End Function
Protected Sub form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles form1.Load
'ReportViewer1.ServerReport.ReportServerCredentials = New MyReportServerCredentials()
'rvTest.ServerReport.Refresh()
End Sub
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
rvTest.ServerReport.ReportServerCredentials = New MyReportServerCredentials()
Here's my problem. I have a subreport that shows data and labels if data is returned. However, if no data is returned, the subreport doesn't show at all. I have a message on the subreport I would like to show if no data is returned, but the subreport won't show at all. Any ideas??
Can we show the data of a report for previous month? The report is supposed to run montly basis. But once it is run, it shows the data only for the previous month.
we can show it if its only for previous day. In this case it is like this;
cdtable.SubmittedDate = GETDATE () - 1
But I dont find function like GETMONTH() or smthing.
When I open Report Builder I do not see any of the models that I've created. The "Select Site or Server" is blank and I cannot get to any of the models. I can't change the dropdown from "Recent Sites and Servers."
I am not sure what I did, because it used to work. I did install SP2 but that did not cause a problem originally.
I can create new models (on both the BIDS and the ReportServer site) and I see that they were created just not in Report Builder. At this point Report Builder is non-functional for me.
The other thing that may be related is that I've never been able to run Report Builder from the website. When I click the button nothing happens. I made a shortcut to ReportBuilder.exe to get around this.
Hi! I've created a report in Report Builder, based on a query. When I run the report in Report Builder, it doesn't show the duplicates rows, even if it works fine in Data source view.
How can I see al rows in Report Builder(even if they're duplicates) ?
Can we show the data of a report for previous month? The report is supposed to run montly basis. But once it is run, it shows the data only for the previous month.
we can show it if its only for previous day. In this case it is like this;
cdtable.SubmittedDate = GETDATE () - 1
But I dont find function like GETMONTH() or smthing.
I have a report that runs monthly and they want to see the previous 2 months of data. This data is stored no place other than the snapshot of the same report for the previous 2 months. Is there any way I can display the last 2 snapshots/history withing my report? Thanks.
I am writing a report in SQL server 2005 Reporting service. The report has two parts: first part shows basic information about the client; the second part lists all the softwares the client has. My question is how to make the softwares listed in two columns as shown below?
Is it possible to show or hide columns in a report on the fly, i.e. without having to run the report again?
I have a report in with a parameter to let the user choose between the data to show. However the customer doesn't like it that he has to rerun the report. Any help would be appreciated!