I need to create a conditional if or case statement in SQL Server 2000
for a stored procedure. Basically if the value passed in is 1,2 or 3 then
it will order by either NEWID(), a text field or a datetime feild.
Not done much dynamic sql so any help would be appreciated.
Fuzzy
Hey guys, i need to find out how can i add order items under a Purchase Order number.
My table relationship is PurchaseOrder ->PurchaseOrderItem.
below is a Stored Procedure that i have wrote in creating a PO:
CREATE PROC spCreatePO (@SupplierID SmallInt, @date datetime, @POno SmallInt OUTPUT)
AS
BEGIN
INSERT INTO PurchaseOrder (PurchaseOrderDate, SupplierID) VALUES(@date, @SupplierID)
END
SET @POno = @@IDENTITY
RETURN
However, how do i make it that it will automatically adds item under the POno being gernerated? can i use a trigger so that whenever a Insert for PO is success, it automaticallys proceed to adding the items into the table PurcahseOrderItem?
CREATE TRIGGER trgInsertPOItem
ON PurchaseOrderItem
FOR INSERT
AS
BEGIN
'What do i entered???'
END
RETURN
help is needed asap! thanks!
In SQL sERVER 2008, I have two fields - Depatment and Employees. I need to sort the result set by employee number ascending order, with following exception
1)when department number = 50 - the preferred order is Employee # - 573 followed by 551-572 (employee # belong to Dept 50 = 551-573)
2)When Department number = 20 – the preferred sort order is Employee # 213-220, followed by Employee # 201-213 (employee # belong to Dept 20 = 201-220)
How shall I achieve this?
Using: SQL Server 7.0
Is there any way to use conditional SQL in the SELECT clause of a stored procedure, i.e., use an IF-THEN to SELECT either COUNT(*) or a column-list based on the value of a parameter passed to the stored procedure? (I'd like to avoid having two sets of queries with the same WHERE clause).
Using: SQL Server 7.0
I need to create a stored procedure for a report Web page which allows the user to specify different criteria. Is there a way to conditionally add different WHERE clauses as needed to a SQL SELECT statement?
hello there
I have a dropdown list with a default value of
All employees
I would like to create the Where statement only if the
value of the dropdown list is Not All Employees
Select fieldname, fieldname2, fieldname3
from Table
If @dropdownVariable is not "All employees"
Where Employee = @dropdownVariable
I need to create a stored proc which has a conditional WHERE clause depending on the value of a passed parameter. I'm having trouble handling the condition. I'm missing something here.
CREATE PROCEDURE Milestone_Get
(@myID int, @iShowAll int)
AS
SELECT uid, name, date, registration_confirmed
FROM tbl_members
WHERE
If @iShowAll = 0
begin
(uid = @myID) AND (registration_complete = 0)
end
else
begin
(uid = @myID)
end
GO
Thanks,
david
I want to return a subset of data from my 'items' table using a stored procedure based on a number of parameters as follows :
customer code varchar(8)
userid varchar(10)
status tinyint
where the customer code can be any valid customer code OR blank, the userid can be any valid userid or blank and the status can be 1 (item is open), 2 (item is closed) or 3 (item is open or closed, i.e. no filter on status)
Is there a better way to achieve this than the following disaster:
IF LEN(RTRIM(LTRIM(@custcode))) = 0
BEGIN
IF LEN(RTRIM(LTRIM(@userid))) = 0
BEGIN
IF @status = 1
BEGIN
-- SELECT Query here !!
END
ELSE
BEGIN
IF @status = 2
BEGIN
-- SELECT Query here !!
END
ELSE
BEGIN
-- SELECT Query here !!
END
END
ELSE
BEGIN
IF @status = 1
BEGIN
-- SELECT Query here !!
END
ELSE
IF @status = 2
BEGIN
-- SELECT Query here !!
END
ELSE
BEGIN
-- SELECT Query here !!
END
END
END
ELSE
BEGIN
IF LEN(RTRIM(LTRIM(@userid))) = 0
BEGIN
IF @status = 1
BEGIN
-- SELECT Query here !!
END
ELSE
IF @status = 2
BEGIN
-- SELECT Query here !!
END
ELSE
BEGIN
-- SELECT Query here !!
END
END
ELSE
BEGIN
IF @status = 1
BEGIN
-- SELECT Query here !!
END
ELSE
IF @status = 2
BEGIN
-- SELECT Query here !!
END
ELSE
BEGIN
-- SELECT Query here !!
END
END
END
Is there a simple way to do conditional totaling?
I have a table that has incremental values, so the maximum value is the current total, however on occassion the value is reset and the increment begins anew. What I need to do is get the total the maximum value each time it is reset.
ie.
Value Date
----- -----
12 1-1
14 1-2
100 1-8
35 1-10
50 1-12
5 1-15
the total would be 155 (100 + 50 + 5)
Hello.Looking for a smarter way to code the following. I have a storedprocedure I will be passing several variables to. Some times, some ofthe fields used in a WHERE clause will not be passed, and I would liketo avoid having to code a bunch of if statements to set the executingcode. For example, below I would only like to execute the LIKEconditions only when the variable in question is not NULL. I did atest and if the variable is set to null, obviously the select does notreturn what I'm expecting.if @switch = "B"SELECT * from ikb whereikbtitle like @ins1 andikbtitle like @ins2 andikbtitle not like @ins3 andikbbody like @ins1 andikbbody like @ins2 andikbbody not like @ins3endThanks for any help or information with this.
View 2 Replies View RelatedHi all,
I created a stored procedure which perfoms a simple select like this:
CREATE PROCEDURE Reports_Category
( @loc varchar(255), @pnum varchar(255) )
AS declare @vSQL nvarchar(1000) set @vSQL = 'SELECT ' + @loc + ', ' + @pnum + ' FROM Category ' exec sp_executesql @vSQL
RETURNGO
It takes field names as parameters. What happens is that when I supply value to only one parameter, the procedure gives error as it is expecting both values. Is there a way to make these parameters work like an 'OR' so that the procedure returns a dataset even if there is only one value supllied.
Please help,
Thanks,
bullpit
Hi,
I'm converting some direct SQL queries into stored procedures. The
original queries have conditional parts appended depending on certain
parameters like this:
Sql = "First part"
If certain condition then
Sql &= "Second part"
Endif
How could I do this in a stored procedure? So far I have made them like this:
IF @condition > 0
Fist part Second part
ELSE
First part
You can see that I have to maintain 'First part' in two locations. What is a better way of dealing with this?
Thanks!
Noc
Created a stored procedure which returns Selected table from database.
I pass variables, according to conditions
For some reason it is not returning any result for any condition
Stored Procedure
ALTER PROCEDURE dbo.StoredProcedure
(
@condition varchar(20),
@ID bigint,
@date1 as datetime,
@date2 as datetime
)
AS
/* SET NOCOUNT ON */
IF @condition LIKE 'all'
SELECT CllientEventDetails.*
FROM CllientEventDetails
WHERE (ClientID = @ID)
IF @condition LIKE 'current_events'
SELECT ClientEventDetails.*
FROM ClientEventDetails
WHERE (ClientID = @ID) AND
(EventFrom <= ISNULL(@date1, EventFrom)) AND
(EventTill >= ISNULL(@date1, EventTill))
IF @condition LIKE 'past_events'
SELECT ClientEventDetails.*
FROM ClientEventDetails
WHERE (ClientID = @ID) AND
(EventTill <= ISNULL(@date1, EventTill))
IF @condition LIKE 'upcoming_events'
SELECT ClientEventDetails.*
FROM ClientEventDetails
WHERE (ClientID = @ID) AND
(EventFrom >= ISNULL(@date1, EventFrom))
IF @condition LIKE ''
SELECT CllientEventDetails.*
FROM CllientEventDetails
RETURN
Also I would like to find out if I can put only "where" clause in if condition as my select statements are constants
I have a data model with 7 tables and I'm trying to write a stored procedure for each table that allows four actions. Each stored procedure should have 4 parameters to allow a user to insert, select, update and delete a record from the table.
I want to have a stored procedure that can accept those 4 parameters so I only need to have one stored procedure per table instead of having 28 stored procedures for those 4 actions for 7 tables. I haven't found a good example online yet of conditional logic used in a stored procedure.
Is there a way to add a conditional logic IF statement to a stored procedure so if the parameter was INSERT, go run this statement, if it was UPDATE, go run this statement, etc?
I have attached my data model for reference.
I am writing a stored procedure that takes in a customer number, a current (most recent) sales order quote, a prior (to most current) sales order quote, a current item 1, and a prior item 1, all of these parameters are required.Then I have current item 2, prior item 2, current item 3, prior item 3, which are optional.
I added an IF to check for the value of current item 2, prior item 2, current item 3, prior item 3, if there are values, then variable tables are created and filled with data, then are retrieved. As it is, my stored procedure returns 3 sets of data when current item 1, prior item 1, current item 2, prior item 2, current item 3, prior item 3 are passed to it, and only one if 2, and 3 are omitted.I would like to learn how can I return this as a one data set, either using a full outer join, or a union all?I am including a copy of my stored procedure as it is.
Is it possible to have to ORDER BY statements in the same storedprocedure?I am trying to use the same stored procedure for two different pagesbut the data returned needs to sorted DESC on one page and ASC onanother. Below is my SP:CREATE procedure sp_getLeads@p_SortType int,@p_PropID intASSELECT ID, PropID, Name, StatusFROM LeadsWHERE PropID = @p_PropIDIF @p_SortType = '1'(ORDER BY DateCreated DESC)ELSEIF @p_SortType = '2'(ORDER BY DateCreated ASC)ENDRETURN 1GOCan someone tell me what I am doing wrong?
View 1 Replies View RelatedI am trying to create a stored procedure that is sent a column name and orders by the column name. conn = New SqlConnection(SQLserver)SQL = New SqlCommand("SearchECN", conn)
SQL.CommandType = CommandType.StoredProcedure
SQL.Parameters.Add("@Search", SqlDbType.Variant)SQL.Parameters.Add("@Sort", SqlDbType.Variant)
SQL.Parameters(0).Value = Search.Text
SQL.Parameters(1).Value = "ECN.ECN"
SQL.Connection.Open()
GVECN.DataSource = SQL.ExecuteReader()
GVECN.DataBind()
SQL.Connection.Close()
SQL.Connection.Dispose()
Stored Procedure
@Search NVARCHAR(MAX),
@Sort NVARCHAR(MAX)
SELECT ECN.ECN, ECN.A, ECN.B FROM ECN WHERE ECN.ECN LIKE @Search OR ECN.A LIKE @Search ORDER BY @Sort
I get the following error
Msg 1008, Level 16, State 1, Line 10
The SELECT item identified by the ORDER BY number 1 contains a variable as part of the expression identifying a column position. Variables are only allowed when ordering by an expression referencing a column name.
Any Ideas
How do you use a variable in the ORDER BY command in a sql statement.
I currently have:
****************************************
CREATE Procedure SS_POList
(
@CompanyID nvarchar(10),
@PO varchar (20) = '%'
)
As
SELECT
SS_Sendback.EndUserPO,
SS_Sendback.PO,
COUNT(SS_Sendback.EndUserPO) as pocount,
SUM(SS_Sendback.Customerprice) as totcost
FROM
SS_Sendback
WHERE
SS_Sendback.EndusercustomerNumber = @CompanyID
AND
SS_Sendback.EnduserPO Like @PO
GROUP BY
SS_Sendback.EndUserPO,
SS_Sendback.PO
ORDER BY
SS_Sendback.PO
GO
*************************************
I changed it to
*************************************
CREATE Procedure SS_POList
(
@CompanyID nvarchar(10),
@PO varchar (20) = '%',
@Order varchar(20)
)
As
SELECT
SS_Sendback.EndUserPO,
SS_Sendback.PO,
COUNT(SS_Sendback.EndUserPO) as pocount,
SUM(SS_Sendback.Customerprice) as totcost
FROM
SS_Sendback
WHERE
SS_Sendback.EndusercustomerNumber = @CompanyID
AND
SS_Sendback.EnduserPO Like @PO
GROUP BY
SS_Sendback.EndUserPO,
SS_Sendback.PO
ORDER BY
@Order
GO
and I receive the following error..
error1008: the select item identified by the Order By number 1 contains a variable as part of the expression identifying a column position. Variables are only allowed when ordering by an expression referencing a column name.
How does it know @order is a position and not a column name... It's a variable. I'm obviously doing something wrong. Can someone help.
Thanks
Hi
I´m newbie using SP, so excuse me if my doubt is stupid!!!
I´m trying to do a SP with like this
create procedure Test
@arg char(10)
as
select * from table
order by @arg
go
when i try to create this i got this error:
The SELECT item identified by the ORDER BY number %d contains a variable as part of the expression identifying a column position. Variables are only allowed when ordering by an expression referencing a column name.
This is possible to do?What i want is the query sorted by the variable i´ve passed(in this case arg).
If someone know how to do this, please tel me.
Thanks.
I am trying to do something similar to the following where I want to perform dynamic ordering on two tables that have been unioned as shown below.
CREATE PROCEDURE procedure_name
@regNum varchar(14),
@sortOrder tinyint = 1
AS
SELECT Filler_OrdNum As 'Accession', RTrim(Obs_Code) As 'Observation', REG As 'Register',
Obs_Date As 'Observation Date'
FROM tblSPG_Header
WHERE
REG = @regNum
UNION
SELECT Filler_OrdNum As 'Accession', RTrim(Obs_Code) As 'Observation', REG As 'Register',
Obs_Date As 'Observation Date'
FROM tblRCH_Header
WHERE
REG = @regNum
ORDER BY Obs_Date DESC
GO
Note that I am only sorting on the Obs_Date column, but I'd like to be able to sort on any column within the selection list. I know that I need to use:
ORDER BY CASE WHEN @sortOrder = 1 THEN Obs_Date END DESC
but I frequently get the following error when I try to do so:
"ORDER BY items must appear in the select list if the statements contain a UNION operator"
If anyone can offer any suggestions, I would appreciate it. Thanks.
i am creating a Stored Procedure and trying to set the value for the sort column value as a variable which is passed from my c# program. But i get an error..is there a way, where i can specify a dynamic value for the sort column in the order by clause . My Procedure is as follows :-
ALTER PROCEDURE PhoneBook_search @startdate varchar(30), @enddate varchar(30), @sortType varchar(15),
AS
DECLARE @starttime AS varchar(30)
DECLARE @endtime AS varchar(30)
SET @starttime = @startdate + " 00:00"
SET @endtime = @enddate + " 23:59"
SELECT *
FROM phonebook
WHERE (exp_date BETWEEN @starttime AND @endtime order by
@sortType )
Any help is appreciated !!!
I can't figure out why this won't work. I want to use a variable for the 'ORDER BY' in my Stored Procedure.
I use this to order my results by product price or alphabetically from a dropdown menu. I have tried the following, but get the error below.
Code:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER procedure [dbo].[SPResults]
[Code] ....
Code:
Msg 1008, Level 16, State 1, Procedure SPResults, Line 21
The SELECT item identified by the ORDER BY number 1 contains a variable as part of the expression identifying a column position. Variables are only allowed when ordering by an expression referencing a column name. Is this possible to do?
Hello,
I have this stored procedure:
SELECT * from purchase
ORDER BY
CASE @OrderBy
WHEN 'traveller_name' THEN cast(traveller_name as nvarchar(100))
WHEN 'canceled' THEN cast(canceled as bit)
END
the @OrderBy is a nvarchar(100) parameter
traveller_name is an nvarchar(100) field
canceled is a bit field
When I execute the stored procedure it works fine until I execute it sorting by canceled field. After that, I cannot sort it again using the traveller_name field. I get this eror:
Conversion failed when converting the nvarchar value 'Jason' to data type bit.
(Jason is a record in the traveller_name)
Removing the castings and sorting by just the column name does not help.
Any ideas?
Thank you
I've encountered some strange behavior in a recursive procedure I'mwriting for a bill of materials. First let me ask directly if what Ithink is happening is even possible:It seems like the procedure is not following the recursion in serialorder, but in parallel. In other words, after one instance of theprocedure calls itself, it continues executing lines below therecursion before the recursion is done. Is that possible? I lookedfor SQL Server Options that might deal with recursion or threading butI couldn't find anything.Now let me explain what's happening in terms of the BoM. All the rowsI expect are returned, but not in the correct order. Let's assume thefollowing tree:1|-2| |-5| | |-7| | -8| -6| -9|-3| |-10| |-11| | |-13| | -14| | |-15| | |-16| | -17| -12| -18| -19| -20| |-21| -22-4-23|-24-25-26This is stored in table P using MemberID and ParentID fields. Forexample,MemberID ParentID-------- --------1 NULL2 13 14 15 26 2(etc...)Based on how I wrote the recursion (I will provide the procedurebelow), I would expect output when starting from MemberID of 1 to looklike this:MemberID Depth Sort-------- ----- ----2 1 15 2 27 3 38 3 46 2 59 3 6(etc... basically, the line order of the graphical tree above, or acounter-clockwise traverse around the tree)Instead, I get this (I'll provide the whole thing because I don't seea pattern):MemberID Depth Sort-------- ----- ----2 1 15 2 23 1 210 2 37 3 34 1 36 2 39 3 423 2 48 3 411 2 413 3 512 2 524 3 525 3 618 3 614 3 615 4 719 4 726 4 720 5 816 4 817 4 921 6 922 6 10Call me crazy, but it looks like my tree was parsed in the same orderthat a set of dominos arranged in the same shape would topple. Theonly way I could see that happening is if the recursion is non-linear,allowing both children and siblings to be parsed simultaneously. Itwould also explain why my sort counter didn't increment properly, butthe depth counter is always correct.Now here are the procedures. There's also a Qty column, since this isa BoM after all, but I didn't need to mention it for my illustrationof the problem above.CREATE PROC makebom @root bigint---- This would be called by the client to find all the parts andquantities-- under a specific part (@root)--ASSET NOCOUNT ONCREATE TABLE #result (MemberID bigint, Qty bigint, Depth bigint, sortbigint)EXEC bomrecurse @root, 1, 0SET NOCOUNT OFFSELECT MemberID, Qty, Depth, sort FROM #result ORDER BY sortGOCREATE PROC bomrecurse @root bigint, @depthcounter bigint,@sortcounter bigint---- This is the recursive procedure, called once by makebom, butrecalling-- itself until the whole tree is parsed, filling the #result table--ASDECLARE @memberid bigint, @qty bigint, @nextdepth bigintDECLARE children_cursor CURSOR LOCAL FORSELECT MemberID, Qty FROM PWHERE ParentID = @rootORDER BY MemberIDOPEN children_cursorFETCH NEXT FROM children_cursorINTO @memberid, @qtyWHILE @@FETCH_STATUS = 0BEGINSET @sortcounter = @sortcounter + 1INSERT INTO #result VALUES (@memberid, @qty, @depthcounter,@sortcounter)SET @nextdepth = @depthcounter + 1EXEC bomrecurse @memberid, @nextdepth, @sortcounterFETCH NEXT FROM children_cursorINTO @memberid, @qtyENDCLOSE children_cursorDEALLOCATE children_cursorGOI'm surprised this even worked as well as it did because I'm a newbiewhen it comes to stored procedures and I put this together fromexamples I found around this group, online and in the T-SQL Help. Sofeel free to comment on other aspects of my code or approach, but I'mmost interested in understanding the behavior of this recursion.
View 4 Replies View RelatedHi, I hope some one can help me. I have a stored procedure (Microsoft SQL 2005 Express Edition) that I want users to be able to dynamically set the, group by, order by (@orderby) and where clause (@where). I have managed to get the group by to work but can't seem to get the where and order by to work. Here's my stored procedure. Any idea how this can be done? ALTER PROCEDURE [dbo].[sp_aggregate] -- Add the parameters for the stored procedure here @finfileid int, @phaseid int, @supplierid int, @measurementid int, @roleid int, @groupby int, @orderby int, @where int AS BEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON; -- Insert statements for procedure here SELECT MAX(ProjectFinFileMonthItems.ProjFinFileMonthItemsMonthId) AS ProjFinFileMonthItemsMonthId, SUM(ProjectFinFileMonthItems.ProjFinFileMonthItemsValue * ProjectFinFileMonthItems.ProjFinFileMonthItemsRate * ProjectFinFileMonthItems.ProjFinFileMonthItemsAvail / 100) AS total, MAX(ProjectFinFileItems.ProjPhaseId) AS phaseid, MAX(ProjectFinFileMonthItems.ProjDeliveId) AS deliveid, MAX(ProjectFinFileMonthItems.SupplierId) AS supplierid, MAX(ProjectFinFileMonthItems.ProjFinFileItemsId) AS ProjFinFileItemsId, MAX(ProjectFinFileMonthItems.ProjFinFileMonthItemsId) AS ProjFinFileMonthItemsId, MAX(ProjectFinFileMonthItems.ProjDeliveId) AS ProjDeliveId, MAX(ProjectPhases.ProjectPhaseName) AS ProjectPhaseName, MAX(Suppliers.SupplierName) AS SupplierName, MAX(ProjectFinFileMonthItems.RoleId) AS RoleId, MAX(Measurements.MeasurementName) AS MeasurementName, MAX(ProjectFinFileMonthItems.MeasurementId) AS MeasurementId, MAX(ProjectFinFileMonthItems.FinDataTypeId) AS FinDataTypeId, MAX(FinDataTypes.FinDataTypeName) AS FinDataTypeName, max(ProjectFinFileItems.FinFileId) as finfileid FROM ProjectFinFileItems INNER JOIN ProjectFinFileMonthItems ON ProjectFinFileItems.ProjFinFileItemsId = ProjectFinFileMonthItems.ProjFinFileItemsId LEFT OUTER JOIN FinDataTypes ON ProjectFinFileMonthItems.FinDataTypeId = FinDataTypes.FinDataTypeId LEFT OUTER JOIN Measurements ON ProjectFinFileMonthItems.MeasurementId = Measurements.MeasurementId LEFT OUTER JOIN Roles ON ProjectFinFileMonthItems.RoleId = Roles.RoleId LEFT OUTER JOIN ProjectPhases ON ProjectFinFileItems.ProjPhaseId = ProjectPhases.ProjectPhaseId LEFT OUTER JOIN Suppliers ON ProjectFinFileMonthItems.SupplierId = Suppliers.SupplierId /*dynamic where clause needs to go here */ /*dynamic group by clause */ GROUP BY CASE when @groupby=1 then ProjectFinFileItems.projphaseid --phaseid when @groupby=2 then ProjectFinFileMonthItems.supplierid -- supplierid when @groupby=3 then ProjectFinFileMonthItems.measurementid -- measurment when @groupby=4 then ProjectFinFileMonthItems.roleid --role else ProjectFinFileMonthItems.ProjFinFileMonthItemsId END /*dynamic order clause needs to go here */ END cheers Mark :)
View 2 Replies View RelatedHi,
I need to include two input variables
in my Order By Clause in a stored procedure like ORDER BY @column @Dirction. But MS SQL does not allow me
to do so and gives an Error 1008.
How can i solve this problem?
Thanks for your help!!
hi there,i am using sql server 7. below is the stored procedure that is givingme grief. its purpose it two-fold, depending on how it is called:either to return a pageset (based on page number and page size), or toreturn IDs of previous and next records (based on current record id).the problem is, that the order in which records are inserted into thetemp table is inconsistent, even though the calling statement and theorder by is always the same: sometimes records are ordered correctly,by project_number, and sometimes the order is broken starting at somerecord (which is always the same).i have no idea what is wrong here, i would appreciate any help!thanks so much.here is the calling statement:EXECUTE spProjects 2,null,'project_number','asc','',6,50here is the proc:CREATE PROCEDURE spProjects@action int,@currID int,@sortBy varchar(50),@sortDir varchar(4),@searchBy varchar(255),@Page int,@RecsPerPage intASSET NOCOUNT ONDECLARE @nextID intDECLARE @prevID intDECLARE @currRow intDECLARE @rowCount intDECLARE @firstRec intDECLARE @lastRec intDECLARE @total intDECLARE @more intDECLARE @sortBy2 varchar(50)-- setup temp tableSELECT r.id as row, r.*,a.name agr_type,pu.name purpose,sp.name sponsor,pr.name prime,p.lname p_lname, p.fname p_fname, p.mname p_mi, p.emailp_email,o.name org,convert(varchar(10), r.created_date, 101) adddate_c,convert(varchar(10), r.updated_date, 101) upddate_cINTO #project_temp_tableFROM spm_projects r, spm_agreement_types a, spm_purpose_typespu, spm_sponsors sp, spm_sponsors pr, spm_pis p, spm_orgs oWHERE 1 = 0IF @sortBy IS NULL SELECT @sortBy = 'project_number'IF @sortBy = '' SELECT @sortBy = 'project_number'SELECT @sortBy2 = @sortBy + ' ' + @sortDirIF @sortBy NOT LIKE '%project_number%' SELECT @sortBy2 = @sortBy2 +', project_number'-- get projectsEXEC ('INSERT INTO #project_temp_tableSELECT r.id as row, r.*,a.name agr_type,pu.name purpose,sp.name sponsor,pr.name prime,p.lname p_lname, p.fname p_fname, p.mname p_mi, p.emailp_email,o.name org,convert(varchar(10), r.created_date, 101) adddate_c,convert(varchar(10), r.updated_date, 101) upddate_cFROM spm_projects r, spm_agreement_types a, spm_purpose_typespu, spm_sponsors sp, spm_sponsors pr, spm_pis p, spm_orgs oWHERE r.agreement_type_id = a.idAND r.purpose_type_id = pu.idAND r.sponsor_id = sp.idAND r.prime_id *= pr.idAND r.pi_id = p.idAND r.org_id = o.id' + @searchBy + 'ORDER BY ' + @sortBy2)SET @rowCount = 0-- number recordsUPDATE #project_temp_table SET @rowCount = row = @rowCount + 1-- prev/nextSELECT @currRow = row FROM #project_temp_table WHERE id = @currIDSELECT @prevID = id FROM #project_temp_table WHERE row = @currRow -1SELECT @nextID = id FROM #project_temp_table WHERE row = @currRow +1-- pagingSELECT @firstRec = (@Page - 1) * @RecsPerPageSELECT @lastRec = (@Page * @RecsPerPage + 1)SELECT @more = COUNT(*) FROM #project_temp_table WHERE row >=@LastRecSELECT @total = COUNT(*) FROM #project_temp_tableSET NOCOUNT OFF-- prev/nextIF @action = 1 SELECT @prevID as prevID, @nextID as nextID--pagingIF @action = 2SELECT *, @more as more, @total as totalFROM #project_temp_tableWHERE row > @firstRec AND row < @lastRecDROP TABLE #project_temp_table
View 7 Replies View RelatedI am creating an app that allows the user to change the order of the list by changing a value in a displayOrder field. I'd love a button for move up /move down move bottom/move top and then pass that parameter to a stored procedure and it would renumber all the items in the list.
Example
ItemID description DisplayOrder Action0 item 1 0 Moveup/move down1 item 2 1 Moveup/move down2 item 3 2 Moveup/move down
So clicking on move up on item 2 would pass and itemID, Action and perhaps a list id to a stored proc and it would renumber the list. I'm assuming it would be done with a loop but I've never tried that.. suggestions?
Thanks - Mark
can i pass the name of the table and the "order by" column name to stored procedure?
i tried the simple way
(@tablename varchar and then "select * from @tablename)
but i get error massesges. the same for order by...
what is the right syntex for this task?
I would like to write the following (pseudo) stored procedure, but am having problem with the syntax:
Create Procedure spSort
@IDContract nvarchar(10)
@SortOrder int
SELECT * FROM Contracts
WHERE IDContract = @IDContract
IF @SortOrder = 0
BEGIN
ORDER BY ContractDate
END
IF @SortOrder = 1 THEN
BEGIN
ORDER BY ShippingPeriod
END
The problem is in conditionally setting the sort order. The actual sp is quite complex and I don't really want to have to use two procedures (one for ordering by ShippingPeriod and one for ordering by ContractDate
Any suggestions please?
Many thanks
Jeremy Holt
Is there a way to do a conditional order by so that a user can give a parameter to a stored proc and it give back results sorted the way they want?
I want it so that the user can do 1 of 4 things,
* sort by "title" ascending,
* sort by "title" descending,
* sort by "synopsis" ascending,
* sort by "synopsis" descending
Can it be done? This is what I have but I get a syntax error:
select * from Blah
Order By
Case
when @orderId = 1 then title asc
when @orderId = 2 then title desc
when @orderId = 3 then synopsis asc
when @orderId = 4 then synopsis desc
end
Any help is greatly appreciated!
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
I have a table (currently with no constraints or relationships) with two columns:
Employee_CodeEarned_Leave_Balance
The leave balance should be updated automatically on a daily basis using a formula. I understand this can be done using stored scheduled procedures. To give you a full and clear picture, this is what I need:
IF [Employee_Code] LIKE 'KUW%'
[Earned_Leave_Balance] = (Today - [Employment_Date]) * (42 / 365)
ELSE
[Earned_Leave_Balance] = (31/12/CurrentYear - [Employment_Date]) * (30 / 335)