I'm looking for help on how to throw a page so that when printing duplex (both sides) a group will start on an odd page number eg 1, 3, 7, 9 etc. My large report needs to be split up into departments. I don't want a department starting on the reverse side of a sheet of paper.
I am having trouble setting conditional page breaks to my reports.
i.e... I am having a report where I need to allow user the option to set page break between a group or not.
Based upon the option selected by the user, I need to add page break to the report. I tried with all possibilities inside Sort and Group dialog box, but could not figure out how to toggle the option at runtime.
Does anyone know how to implement page breaks on runtime? Help me plzzzz!! I really need this to be done€¦Thanx in advance for any help..
I have a report that has a Parameter called "LevelOfDetail" This has 2 possible values "Summary, Detail, or Combined".
The report has a Summary Section and a subreport that holds the details. WIthin the summary section is a Matrix (a list of all properties and some values)
If they choose to see the details, the matrix in the details section will show a break out of all this information summarized in the summary section.
The Details Matrix is set to have a page break at the beginning and end of the top level group.
I have a list control on the summary page that contains the details subreport and passes the appropriate parameter.
Everything works the way I want until I try to set visibility on sub report.
Once I set the conditional visibility of the report objects (based on the Level of Detail parameter) the page breaks are not recognized.
This is important as the user will never print the report, but will be downloading to Excel.
If the page breaks work correctly, each page is assigned a different worksheet in their downloaded workbook.
I have a report which produces invoices. These invoices are more complex than your average ones.
The invoice is for one customer but many orders. Within the invoice, orders are grouped together by their delivery address which can be different for each order within the invoice. I throw a page for each seperate delivery account and sub-total by delivery account too. All this works fine and page breaks are all OK. However I also need a summary page at the end of the invoice showing 1 line per delivery account andf the sub-total for it, then I show a grand total.
To achieve this, I used a list control, grouping on Invoice number. within it I placed 2 tables. 1 is the main Invoice table, the 2nd is the summary table. I have a page break on a group in table 1 that controls the split on delivery account. I have a page breaks on table 2. Again this all works fine and paging is perfect.
Here's the crunch though! If the invoice only contains one delivery account, I need to suppress the summary table. This I can do BUT I still get the page throw for it, effectively giving blank pages. The page break is triggered regardless of whether the containing control is visible or not.
I'm pretty accomplished with RS and I've tried all sorts of tricks and hacks to get round it but it seems a page break is added regardless of whether the control triggering it is visible or not!
I've tried rectangles both with the table in it and outside. And with the page break on the rectangle and when that didn't work , on the table inside it.
I am using SQL Server 2005 Express and one of the fields in my table has the UNIQUE constraint. When I try inserting a duplicate nothing gets inserted in the table, but no error is thrown. Where can I do a check for this? I would like to popup a message to the user indicating that the insert failed to the the unique constraint. I have configured the SQLDataSource with Insert/Update/Delete so the actual insert is done behind the scenes. Thanks in advanceEric
When I execute the SQL Script in SQL Server Management Studio, everything is just fine. Â I have included this SP in a VS 2012 Database Project, and when I build, I get the error 'Incorrect Syntax near Throw'. Â The Database project is set to SQL 2012. Â I did try putting a ';' in front of the THROW as has been suggested on other threads. is this a case where we will have to abandon use of VS 2012 Database integration?
I'm trying to run a DTS package, and cant find an easy direct way to run it. It seems like the easiest solution would be to throw a custom error- then the server notices the error and runs a custom job, and the custom job runs the DTS. This is a roundabout way, but seems like it would be the simplest solution.Anyways, how do I throw the error in my code? Do I just write a throw 3829 statement? Also maybe this is a very bad way to do this- any suggestions?
I'm using Decimal.MinValue in SqlParameter( SqlDbType.Decimal ) to execute a stored procedure. But, I receive this stack trace exception: System.OverflowException: Conversion overflows. at System.Data.SqlTypes.SqlDecimal.ToDecimal() at System.Data.SqlTypes.SqlDecimal.get_Value() at System.Data.SqlClient.TdsParser.AdjustDecimalScale(Decimal value, Int32 newScale) at System.Data.SqlClient.TdsParser.TdsExecuteRPC(_SqlRPC[] rpcArray, Int32 timeout, Boolean inSchema, SqlNotificationRequest notificationRequest, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() I have changed Decimal.MinValue to Decimal.Zero to resolve my trouble. But, Why Decimal.MinValue throw OverflowException? Isn't Decimal.MinValue valid SqlDbType.Decimal type?
Hi everybody, I have a good question. If anybody know help me.
Every body know that SQL Server has SQL SERVER LOG 1- Current and 6 - Archives I'm shure every DBA look inside every day. And we can note inside a lot of many adds looks like this one:
2000-09-28 10:23:42.85 spid10 Starting up database 'pubs'.
So, we can see that 'spid10' had some activity at that day, but HOW TO GET INFORMATION about WHO IS IT - Login name or Username at least. Any idea will be appreciated
This is my code connect to SQL Server SqlConnection con = new SqlConnection("Data Source=OIT;Initial Catalog=big_db;User ID=sa; Password="); SqlDataAdapter cmd = new SqlDataAdapter("select * from myDB", con); SqlCommand sqlCmd = new SqlCommand(); DataTable dt = new DataTable(); cmd.Fill(dt); // It throw exception When myDB table have a lot of data, it throw exception like this : "It reached the time-out. Did the time-out period pass before completing the operation or the server doesn't respond. ". I config TCP/IP for SQL Server is Enable, but it throws SqlException too. How can I do? Help me please!!!
I have a report runs without any problem (Url access) and export to other format also without any problem. Only when I export the same report to Excel, the following error occurs in the reportserver log and its throws an error on screen.
I have found out it is down to a table grouping on a data field.
The report conatins a list and the list has a details group, which grouping the data by week. A table is sit inside the list to report the data. Within the table, there is a group list which is grouped by a field from the dataset.
I have the actual RDL and RDL.data file if anyone like the challenge.
Here is the error from the report server log:
--------------------------------------------------------------------------------------------------------------------------------------------- aspnet_wp!library!1!01/11/2008-14:54:49:: i INFO: Call to RenderNext('/ExportExcelProblemReport' ) aspnet_wp!reportrendering!1!01/11/2008-14:54:50:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.WrapperReportRenderingException: An error occurred during rendering of the report., ; Info: Microsoft.ReportingServices.ReportProcessing.WrapperReportRenderingException: An error occurred during rendering of the report. ---> Microsoft.ReportingServices.ReportRendering.ReportRenderingException: An error occurred during rendering of the report. ---> System.InvalidOperationException: Operation is not valid due to the current state of the object. at Microsoft.ReportingServices.ReportRendering.TableGroupCollection.get_Item(Int32 index) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.GetReferenceInTable(TableHeaderFooterRows header, TableHeaderFooterRows footer, TableGroupCollection tableGroups, TableRowsCollection detailRows, IntList indexPath, Int32 startIndex) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.GetReference(ReportItem dataRegion, IntList indexPath, Int32 startIndex) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.GetReference(ReportItem dataRegion, IntList indexPath, Int32 startIndex) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.GetReference(ReportItem dataRegion, IntList indexPath, Int32 startIndex) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.CollectHiddenReportItems(IntList indexPath, PageReportItems& pageRI) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.PreScanPage(ReportItem parentDataRegion, Boolean isPageNeedsEvaluation, PageLayout& pageLayout, PageReportItems& pageRIItems, Stack& dynamicLayoutStack, Hashtable& rowHeightStateList, OutlineRenderStates[]& verticalOutlineStates, OutlineRenderStates[]& horizontalOutlineStates) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.RenderStaticPage(ReportItem parentDataRegion, PageLayout pageLayout, Hashtable formulaRIMap, Int32 currentPageNumber, PageReportItems& pageRIItems, Stack& dynamicLayoutStack) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.RenderPageLayout(PageLayout pageLayout, Int32& currentPageNumber, Stack& stack) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.RenderPageCollection(PageCollection pageCollection, Int32& currentPageNumber, Stack& stack, PageLayout& lastPageLayout) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.RenderOrCountDynamicPage(Stack& renderDynamicStack, Int32& currentPageNumber, Int32 stackTop, PageLayout& lastPageLayout, Action action) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.RenderPageCollection(PageCollection pageCollection, Int32& currentPageNumber, Stack& stack, PageLayout& lastPageLayout) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.GenerateWorkSheets() at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.GenerateMainSheet() at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.RenderExcelWorkBook(CreateAndRegisterStream createAndRegisterStream) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.ProcessReport(CreateAndRegisterStream createAndRegisterStream) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.Render(Report report, NameValueCollection reportServerParameters, NameValueCollection deviceInfo, NameValueCollection clientCapabilities, EvaluateHeaderFooterExpressions evaluateHeaderFooterExpressions, CreateAndRegisterStream createAndRegisterStream) --- End of inner exception stack trace --- at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.Render(Report report, NameValueCollection reportServerParameters, NameValueCollection deviceInfo, NameValueCollection clientCapabilities, EvaluateHeaderFooterExpressions evaluateHeaderFooterExpressions, CreateAndRegisterStream createAndRegisterStream) at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderSnapshot(IRenderingExtension renderer, CreateReportChunk createChunkCallback, RenderingContext rc, GetResource getResourceCallback) --- End of inner exception stack trace --- aspnet_wp!webserver!1!01/11/2008-14:54:50:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.RSException: An error occurred during rendering of the report. ---> Microsoft.ReportingServices.ReportProcessing.WrapperReportRenderingException: An error occurred during rendering of the report. ---> Microsoft.ReportingServices.ReportRendering.ReportRenderingException: An error occurred during rendering of the report. ---> System.InvalidOperationException: Operation is not valid due to the current state of the object. at Microsoft.ReportingServices.ReportRendering.TableGroupCollection.get_Item(Int32 index) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.GetReferenceInTable(TableHeaderFooterRows header, TableHeaderFooterRows footer, TableGroupCollection tableGroups, TableRowsCollection detailRows, IntList indexPath, Int32 startIndex) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.GetReference(ReportItem dataRegion, IntList indexPath, Int32 startIndex) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.GetReference(ReportItem dataRegion, IntList indexPath, Int32 startIndex) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.GetReference(ReportItem dataRegion, IntList indexPath, Int32 startIndex) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.CollectHiddenReportItems(IntList indexPath, PageReportItems& pageRI) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.PreScanPage(ReportItem parentDataRegion, Boolean isPageNeedsEvaluation, PageLayout& pageLayout, PageReportItems& pageRIItems, Stack& dynamicLayoutStack, Hashtable& rowHeightStateList, OutlineRenderStates[]& verticalOutlineStates, OutlineRenderStates[]& horizontalOutlineStates) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.RenderStaticPage(ReportItem parentDataRegion, PageLayout pageLayout, Hashtable formulaRIMap, Int32 currentPageNumber, PageReportItems& pageRIItems, Stack& dynamicLayoutStack) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.RenderPageLayout(PageLayout pageLayout, Int32& currentPageNumber, Stack& stack) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.RenderPageCollection(PageCollection pageCollection, Int32& currentPageNumber, Stack& stack, PageLayout& lastPageLayout) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.RenderOrCountDynamicPage(Stack& renderDynamicStack, Int32& currentPageNumber, Int32 stackTop, PageLayout& lastPageLayout, Action action) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.RenderPageCollection(PageCollection pageCollection, Int32& currentPageNumber, Stack& stack, PageLayout& lastPageLayout) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.GenerateWorkSheets() at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.GenerateMainSheet() at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.RenderExcelWorkBook(CreateAndRegisterStream createAndRegisterStream) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.ProcessReport(CreateAndRegisterStream createAndRegisterStream) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.Render(Report report, NameValueCollection reportServerParameters, NameValueCollection deviceInfo, NameValueCollection clientCapabilities, EvaluateHeaderFooterExpressions evaluateHeaderFooterExpressions, CreateAndRegisterStream createAndRegisterStream) --- End of inner exception stack trace --- at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.Render(Report report, NameValueCollection reportServerParameters, NameValueCollection deviceInfo, NameValueCollection clientCapabilities, EvaluateHeaderFooterExpressions evaluateHeaderFooterExpressions, CreateAndRegisterStream createAndRegisterStream) at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderSnapshot(IRenderingExtension renderer, CreateReportChunk createChunkCallback, RenderingContext rc, GetResource getResourceCallback) --- End of inner exception stack trace --- at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderSnapshot(IRenderingExtension renderer, CreateReportChunk createChunkCallback, RenderingContext rc, GetResource getResourceCallback) at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderSnapshot(CreateReportChunk createChunkCallback, RenderingContext rc, GetResource getResourceCallback) at Microsoft.ReportingServices.Library.RenderSnapshotAction.Render() at Microsoft.ReportingServices.Library.RSService.RenderFromSessionNoCache(CatalogItemContext reportContext, ClientRequest session, RenderingResult& result) at Microsoft.ReportingServices.Library.RSService.RenderFromSession(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters) at Microsoft.ReportingServices.Library.RSService.RenderNext(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effecectiveParameters, String[]& secondaryStreamNames) at Microsoft.ReportingServices.Library.RenderNextCancelableStep.Execute() at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper() --- End of inner exception stack trace --- at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper() at Microsoft.ReportingServices.Library.RenderNextCancelableStep.RenderNext(RSService rs, CatalogItemContext reportContext, ClientRequest session, JobType type, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames) at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory) at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation) at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderItem(ItemType itemType) at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent() at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage()
Maybe I am mistaken ( most likely ). But I am missing a dataflow task, which would do something similar like Throw Execption.
The project I am currently working on needs to validate a lot of different data. And sometimes incorrect data ( corrupted, incomplete or unexepected ) is coming from the source system. In case of this I need to trigger an error and discard the complete row or batch depending on the situation.
For example: In our source system we have some flag fields. And certain combinations of flags are not logical (business rules) but the system allows data to be inputted in this unlogical ways. And because we are creating the system I am expecting some combinations flags which are allowed but not properly defined in the specification.
So when I use a conditional split, I want the default output to trigger an error instead of an output.
I am using Data flow object in that I take OleDb as Source and Sql Server As destination. Without enabling Package configuration everything is working fine data is moving from Source to destination.
But When i apply Package Confiiguration It throw Error And My OleDb Source object Convert in to RED Color. I cant able to track This errror
I have created one reports but all the records are displaying on one page.find a solution to display the records page by page. I created the same report without group so the records are displaying in page by page.
Is there a way in order to execute a subscribed report based on a certain criteria?
For example, let's say send a report to users when data exist on the report else if no data is returned by the query executed by the report then it will not send the report to users.
My current situation here is that users tend to say that this should not happen, since no pertinent information is contained in the report, why would they receive email with blank data in it.
My team is starting to implement error handling in our sprocs. One question we have is whether or not to use unique error numbers for custom errors (ie Errors we throw after doing some sort of validity check, not SQL Server errors). For example, we might check the value of a parameter and then throw an error that says "Parameter State_Date must be less than today, please retry".
We are using SQL Server 2012 and will be using the THROW statement, not RAISERROR, so we don't HAVE to put the numbers in sys.messages. Also, we are going to log the errors in a table, along with the error message, sproc name, line number, etc.
Is it useful to maintain a custom list of error numbers and messages? Or is it just as useful to use one standard error number and add a custom error message (which we can then search for in our code, or use the sproc name & line number we logged)? And if it is worth maintaining a list of numbers plus messages, should we go ahead and put them in sys.messages?
I have a dataset that is between 40-50K records that has to go through a process that is pre-defined. SSIS works just fine with the smaller sets even up to 20K but this job keeps blowing up saying something along the lines of cannot write to recordset destination. Does this make sense to anyone? The sever is a 2 processor with 2GB of ram. Physical memory usage spikes to about 1.6GB during the run but the processor never really gets above 30% usage. Does this product just not scale yet?
Hello I have a project that uses a large number of MS Data access pages created in Access 2003 and runs on MS SQL2005.
When I am on lets say my client, (first page in a series) data access page and I have completed the fields in the (DAP), I am directing my users to the next step of the registration process by means of a hyperlink to another Data access page in the same web but in a linked or sometimes different table.
I need to pass data entered /created on the first page to the next page and populate the next page with some data from the first page / table. (like staying on the client name and ID when i go to the next page)
I also need the first data access page to open and display a blank or new record. Not an existing record. I will also be looking to creata a drop down box as a record selector.
Any pointers in the right direction would be appreciated. I am some what new to data access pages so a walk through would be nice but anything you got is welcome. Thanks Peter€¦
I have the following code in the color property of a textbox. However, when I run my report all of the values in this column display in green regardless of their value.
I can't find any explanation why is it string1 and string 2 of the footer section of my report displayed separately from the expression3 which is aligned on it and the rest of the object on the second page.
The expected design is that all Footer items should be displayed together of whether it is placed on the first page or on the last page.
As a workaround of this, I converted string 1 into an expression (Added = and enclosed the string with double quote).. As a result, all of the items in the Footer section are now placed together on the last page of the report.
I also remember one of the issue I encountered before where the Footer items where placed together on the first page and still have space at the bottom of the page, but then expression 6 is forced to display (alone) on the last page of my report.
I can't find any discussion related to this, I wish somebody could give me an idea why RS behaved like this.
Fit an intere table in same page without page break for save the excel export.
My table has a Group for order my dates.
I need to have the intere table in the same page, i don't care about blank space at the end of the page.
I can't use the page break beacuse i need an excel export in a unique sheet.. I have tested.. every page break..you'll have a different sheet in your excel export
Hello, If I have a report that includes a page header, the report viewer will render the report at the full width, but if I hide the page header and show only the body it will use the absolute width of the report.
I have a 7" wide report, with .75" borders set on each side.
Interactive & Print size are set to 8.5x11 Changing these sizes has no effect on the behavior of the viewer, which appears to ignore them.
When I view this report in the local viewer the contents fill the window if there is no page header. If I enable the page header then the report is drawn at 8.5" wide, leaving a _big_ white border on the right side. Any comments or workarounds that anyone knows? I know the local viewer is not a standard configuration (at least it seems) but it is what we need to use.Thanks,//Andrew
How can I print a field that is in the dataset on each page? I added a textbox in the Page Header and use =Fields!ProjectName.value in the value property. I got an error "Fields cannot used in page header and footer."
How can I have the table header shows on each page? Currently if the data goes to the second page, there is no table header.
When i view the Report from SSRS Report preview Tab it's working fine, But when i deploy that and try to view in the IE I am seeing the Body background color in between the image and page border of the page footer how to solve that?
Hi All, In my SSRS report. I have a report which has only one page. In preview it is showing as only 1 page but when I am printing the report. I am getting two printouts with the second page as a blank.. Please help me in printing the page that contains report. Intially I used a Page header, at that it used to print the blank page with a header only. Now as I removed the header it is printing the page without header i.e Blank Page.. So please help me in prinitng a single page that has the report. It is urgent,..
I have a report with multiple tables. I need to show each tables in different pages. When there is no data for tables/tables , it is coming with the next table which has data. I have given "Add a page break after" option in the tablix but still the tables are coming together when no data available. How can I show it in different page?
I have a report with tablix. when tablix returns no rows Footer is coming all the way up . How to display the footer at the bottom of the page all time.