I've searched everywhere for this but can't find the answer
I want to run a DTS package that simply executes a SQL statement to get
a count of rows in a table, if the resulting number is greater than
zero I want to execute another step in the same package, else just
quit.
I don't to pass global vars from one package to another
How can I do this?
Any help would be great
I have a situation where I'd like to conditionally execute the first task in a package based on the contents of a user variable.
If user variable "Var1" is false I want to begin execution with the first task.
If "Var1" is true I want to begin execution at the second task.
My first thought of course was SequenceContainer, but the same issue would exist for the first task in a SequenceContainer.
Is there a way to do this?
Thanks!
I have basic knowledge of SSIS and will appreciate if some can suggest a way (with example if possible), to solve this problem.
I have an SSIS package that requires execution of another package, lets say B. This I am able to do using the 'Execute package' task. Now, what I really want to do is, I wish to check if a perticular table 'A' has rows that satisfy a given condition. In other words, I wish to execute Package 'B' onle if Table 'A' has rows. How can I do this?
Thanks in advance.
Greetings.
I'm trying to conditionally execute a dataflow based on the presence of a data file. If the data file isn't present, I'd like to execute gracefully without error.
Logic is as follows:
If FileExists Then
execute dataflow
Else
exit w/o error
End If
I've got the code ready to go, but I'm not sure how to do this conditional branch logic. Right now, the code calls the Dts.Results.Success / Failure. The problem, however, is Failure is exactly that... which doesn't result in the graceful exit I'm looking for.
Anyone have any ideas?
Thanks in advance.
hello to every body.. well i have a problem.. well i created a package the task of which is to update thedimensions and the fact tables from the tables of source.
i created a configuration file with all the parameters that are nedded (connections managers; parameters of packages).this config file will include all the paremeters need for the execution of other packages
In that package i call an other package (execution package task). this package normally will take the parameters of the parent package isn't it??(i put the parameters of this package to the config file of the parent package).
i must also note that for the second package called there is also a package...
i must also note that i have 2 DWHs (a and b) for testing.
the problem is that when i execute the parent package to DWH b , the sacond package called do not take the parameters of the parent package. instaed it looks to its XML configuration file(in a different location of the config file of the parent package) which contains the connection parameters to DWH a and it calls strored procedures from the DWH a (instead of calling at SP from DHW b).
any ideas??
thnx a LOT0
Hi,
I am developing an SSIS package and need the execution of the package to continue even if one of the tasks within the package fails. I have an OnError event handler for this task which fires when it fails but want the rest of the package to continue.
Any suggestions greatly appreciated.
Thanks
Hello everyone,
Is there a way in order to execute a subscribed report based on a certain criteria?
For example, let's say send a report to users when data exist on the report else if no data is returned by the query
executed by the report then it will not send the report to users.
My current situation here is that users tend to say that this should not happen, since no pertinent information is contained in the report, why would they receive email with blank data in it.
Any help or suggestions will be much appreciated.
Thanks,
Larry
I have a job which exports and emails the data from a table (subject to some conditions) . The data is exported to a test file. I donot want to send the email if there are no rows exported. or the filesieze is 0. Otherwsie I want to send the email with this text file as attachement.
Any ideas?
Thanks
Ragu
There was a similar question to mine a few time ago about conditional execution, but I'm having some problems with it to which I couldn't find any answer, could anyone help?
My condition is checking if a DateTime from a DB table is null. I use the Execute SQL Task to retrieve the record (SELECT TOP 1 * FROM myTable WHERE conditions = TRUE), then I map 2 fields to their respective global variables.
Then I created the green arrow connector and used a precedence expression based on sucess. I used the expression IsNull(@variable). For some reason, even if the @variable comes as null - I checked the info in the DB - it still comes out as '1999-11-30'
I've looked around and the IsNull method can be used to also change the value in the event of it being null, could it be changing my variables value to this even if I didn't pass that value as a parameter to the function? If so, how else can I test it for null? I've tried "== null", "= null" and even ".equals(null)" - which I know is absurd, but I'm running out of options here...
Could you enlighten me, please???
Thanks in advance!
Hi,
I created a package which passes some infornmations( through parameters) to its child package.
I need to do some processing in parent package based on execution status of child package.i.e.
if child fails then some operation and if child succeeds then other operation.
To determine the status of execution of child package I am using two differnt constraint ..one constraint is having value "Success" and other having value "Failure".
My problem is that when child packge is executed successfully the constraint with value = "Success" works properly but when child fails the constraint with value "Failure" does not work.
-Prashant
Hi All
I am trying to do a simple thing using Conditional Split Task. But I get this error everytime.
[Conditional Split [462]] Error: The expression "ColName1 == "AWM"" on "output "Case 1" (506)" evaluated to NULL, but the "component "Conditional Split" (462)" requires a Boolean results. Modify the error row disposition on the output to treat this result as False (Ignore Failure) or to redirect this row to the error output (Redirect Row). The expression results must be Boolean for a Conditional Split. A NULL expression result is an error.
What I wanted to do is. Split the result result set accoring tro data in Colunm "ColName1". and if the data is AWM then pull that row.
Currently I have NO row for ColName1 that has AWM in it. But still if it didn't find any then all the row must go to default.
Also, when I give a valid name instead of AWM it works.
Please let me know where I am wrong!!!!
How can I do this in SSIS using conditional split task. If i cant do this using Conditional Split task then what wud b the best alternative
I have a table
Col1 Col2 Col3
ABC A1 123
XYZ B1 456
ASD C1 789
Now I wanna use conditional split in which I want to give condition as case1-> if Col1 = "ABC", case2 -> if Col1 ='XYZ', Case3 -> if Col1 ='ASD' . i.e. depending upon the data in the Col1 it should split.
i tried this but its giving me error saying PARSING THE EXPRESSION FAILED. Help me out please...
Hi,
I want send email if certain conditions are met (by send mail task)... if compnay records does not exists in some table (returns null)... not task failure.... how do I achieve this without using Script task?
does any one have an idea about it,
regards
Dear all,
I have to import data from flat file and I need to filter the data because there is always a Carriage Return Line Feed at end of the file. Currently I'm using Conditional Split task but I didn't know how to validate the CRLF character so I can separate it from valid data.
How to detect those CRLF using Conditional Split or do I have to use another task ?
Thanks in advance,
Hery Susanto WR
Hello
Can anybody help me out in
1) implementing cursors in SSIS. I want to process each row at a time from a dataset. I was trying to use Foreachloop container but in vain. Can you please answer in detail.
my few other questions are:
1) Can i do nested inner join in SSIS. If yes, how? ( I have three table i need to join Tab1 to table 2 and get join the table 3 to get the respective data)
2) I have a resultsets. I want to split the data according to data in a col.
Say for instance:
Col1 Col2
A 1
A 2
B 3
C 4
C 5
i want to split the data according A, B and C . i.e., if Col1= A then do this, if Col1= B then do this..etc. How can i do this using conditional split task in SSIS
Hello Experts,
I am trying to load data to a sql table from flat file..I have a script component which will validate the data. I am also firing the errros when data validation fails. Once I encounter an error I want the whole package to be aborted. What I have done is declared a variable called errorcount (Scope :Package) and I am incrmenting this variable everytime an error is raised and next I have a Conditional Split which will check if this variable count is greater than 0 if yes I will not update the table.This is the only way I think this will work.
error I am getting is :The collection of variables locked for read and write access is not available outside of PostExecute.
I understand they r in the same data flow thats the reason I get this error but how can I by pass it ?
MY dataflow-> Flat File Source-Script Comp-Condtional Split-(If errorCount==0)-SQL Table
How can I redo the dataflow so that this err is not raised.
I have tried to add an output column (blnContinue) and use that in conditional stmt but as this is stored at row level values which have blnContinue as true are getting processed, I dont want this I just want to stop the package execution even if a single validation fails
Pardon my long question
Appreciate your help in advance
Hi everyone,
For first time I'm testing this task and surprisingly, when I try "Edit Package" option:
1)The DTS host failed to load or save the package properly
2)The selected package cannot be opened
3)Error HRESULT E_FAIL has been returned from a call to a COM component
But after these messages you can see all the tasks but they haven't name!!
It seem as if RCW mechanism has failed between managed and unmanaged coded-partially.
I don't dare to follow doing more stuff, I don't know if that package is well-loaded or not from there. ?ŋ
Any guidance or idea about this?
Hi,
Is there any way to enforce task execution order within a control flow? I need to have tasks execute after each other, because for example Task B depends on the execution of Task A.
Doesn't the success constraint enforce execution order? When I run my package the tasks seem to execute in a random order which is not what I want.
What I am trying to do is:
Loop through all Xml files in directory
For each Xml file:
For categories, products & fields:
Truncate staging table
Insert data from Xml file into staging table
After all Xml files have been processed then import data from staging to main tables
Here is my control flow:
http://www.myfootballonline.com/flow.png
Hi friends,
I have a for each loop that populates from a set of flat files into a Sql Server table, I run the Flat file Import via a dts package embedded into Execute DTS 2000 Task. I want to pass the Sourcefile Name that is fetched by the For Each Loop to assign it Global Variable in DTS. how this can be made ?
Thanks
Subhash Subramanyam
While Creating a script task in Control Flow, I am getting "Package Validation Error". Here is the complete message:
Error at Validate File and Load Data: The task is configured to pre-compile the script, but binary code is not found. Please visit the IDE in Script Task Editor by clicking Design Script button to cause binary code to be generated.
(Microsoft.DataTransformationServices.VsIntegration)
As mentioned in the message, I opened the script IDE and added the code I need. When I close the VSA IDE, package designer displays the same error message.
The worst part of whole story is that if I close the package designer and reopen it, I find that all the code I wrote in the script task has been deleted by the package designer. This is not at all acceptable as I saved the package the and still lost all my work. I did all the coding from scratch for that task.
Please respond if anyone faced similar problem.
Thanks in advance!
Anand
PS: If any one from Microsoft is reading this, please see what you guys are coding there. Due to the buggy software you deliver, I am loosing my credibility.<P< P>
I am having problems executing a child package from a parent package using the Execute Package Task. I am attempting to run the master package through a SQL Server Agent job.
The SQL Server Agent job is owned by sa. The step that runs the parent package is configured to load the package from the SSIS Package Store on the same server that the job is running.
I have the Execute Package Task configured as follows:
Location: SQL Server
ExecuteOutOfProcess: True
Connecting as a SQL Server login (let's say TestEtl)
I have added the db_dtsoperator database role to both the TestEtl login and the login that SQL Server Agent connects through. I have also configured the child package's reader role to include db_dtsoperator. Per http://msdn2.microsoft.com/en-US/library/ms141053.aspx, this should allow these logins to run the child package.
I have enabled logging of all events in both the parent and child packages. I see the following in the logs when the Execute Package Task executes (omitted portions unrelated to the execution of the child package task):
450939 OnPreExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450940 OnPreValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450941 OnPostValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450942 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDataInitialize::GetDataSource'.450943 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDataInitialize::GetDataSource succeeded'. The external request has completed.450944 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBInitialize::Initialize'.450945 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBInitialize::Initialize succeeded'. The external request has completed.450946 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBCreateSession::CreateSession'.450947 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBCreateSession::CreateSession succeeded'. The external request has completed.450948 OnError ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450949 OnError ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450950 OnTaskFailed ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450951 OnPostExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450952 OnWarning ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. 450953 OnPostExecute ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450954 PackageEnd ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 End of package execution.
I am sure that what I am doing is quite common, and I obviously have something misconfigured somewhere - but I'm not sure what my misconfiguration is. Can anyone enlighten me?
Hi,
I have created a SSIS package with Web Service task in it,which execute remote server web service
I got following error during Web service execution
Note:I am not using proxy settings,i also checked HTTP connection and it suceeded
Error:[Web Service Task] Error: An error occurred with the following error message: "Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: Could not execute the Web method. The error is: Object reference not set to an instance of an object.. at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.InvokeMethod(DTSWebMethodInfo methodInfo, String serviceName, Object connection) at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTaskUtil.Invoke(DTSWebMethodInfo methodInfo, String serviceName, Object connection, VariableDispenser taskVariableDispenser) at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTask.executeThread()".
Please help..
Thanks in advance
I use a execute package task to run a child package in which I run some sql task.
as the error handle I insert a script task and link a line from execute package task to script task
of course the line is red,
but I found when the child package failed, the execute package task turns red,it stopped
the script task can't be run, I don't konw why?
Hi,
I am calling one SSIS package from another using the Execute Package Task.
I also need to pass a parameter to the called SSIS package.
Can I do this? If yes, how? If no, then what will be the work-around for this?
Thanks in advance.
I have one Data flow, which trasfer data into two table (Parent & Child) .
My question is : Is there a way, i can load data first into parent and then child table. because child table getting load first after that parent table loading. (Execution should be Source Parent --> Destination Parent) First , (Source Child --> Destination Child) Second.
In my case its executing reverse. So i have foreign key constraints at child table , its giving foreign contraints error while running ssis package
Can any one tell me,
How to define my own sequence execution at the Data flow task (Source - Destination) ?
Thanks
I have already created package which loads a text file to database.I wanted to execute that package based on the availability of the file using Visual Basic,Perl or VBSCRIPT whichever is easier.Please advise.Thanks
View 4 Replies View RelatedI wrote a stored procedure that calls a DTS package that imports a file into a SQL Server table, then executes some commands on that table. How can I tell that the DTS package has completed, so that I can continue with the next command? Here is my code:
-- Run the DTS package
EXEC @Result = msdb..sp_start_job @job_name = 'MyJob'
WAITFOR DELAY '00:00:02'
-- Call the table that the package created
SELECT * FROM <imported_table> WHERE ...
I had to insert a WAITFOR statement to make this work. Any other suggestions as to how to know when to continue?
Thank you.
Is there a method to either:
A) Kick of a DTS package directly from a stored procedure without shelling out to the DTSRun facility.
B) Kick off a scheduled job containing a DTS task from a stored procedure?
What's the best method?
Hi Friends,
I need help from you.
I am working on SSIS packages for ETL purpose.
The version of SQL Server i am using is SQL Server 2005.
In Brief , the working of current ETL is as follows.
In ODS database i have 2 tables i.e Table_A & Table_B which gets loaded from another 2 staging tables A & B.
And using this 2 tables data will be loaded into a target table i.e Trg_A.
The ETL packages are executed by stored procedures by creating a job within the stored procedure.
The loading of the trg table is little tricky.
Before that loading of Table_A is implemented in a single SSIS package.
and loading of Table_B is been implemented in another SSIS package.
In the trg table there are two columns which will be getting updated as and when each table is loaded.
so for the first time if i run the package which is resposible for loading Table_A, it loads values into Table_A and once done it will updates (col1) in the target table.
Once after the complete of the execution of Package1.
Now i will kick off the second ssis package which loads the data into Table_B and updates the trg table's columns (col2).
Now the actual problem what i am facing is:
For loading Table_A and updating the col1 in Trg table i will be receving more than 5 excel file every month on weekly basis.
I cannot even gather all the files and run using a For-Loop counter.
So presently i am loading data excel file per week .
Similarly loading of table_B.
For a week if i am executing both the packages which loads the Table_A and updates the Trg(col1) and Table_B and updates Trg(col2), then i am getting a Deadlock Error and the entire ETL is getting messed up.
Now my requirement is , Eventhough the 2 packages are run in parallel , there could certain milli seconds time difference while start of the execution in Job Monitor.
I need to implement a Queing Mechanism which takes care of running the packages in a sequential manner rather than in parallel. i .e i need to ensure only one SSIS package is running in Job Monitor. Only after successful execution of either one the package, then only the second package should start its execution.
If we can implement such a queing mechanism , then my problem is solvedl.
I need some suggestions on this regard in implementing the Queing mechanism in a programatic approach using SQL Server Job Related MetaData Tables.
or else is there in server parameter or initialization parameters which can be set at Database level which suffice my requirement.
Any suggestions would be greatly appreciated.
Looking for sincere comments on this regards.
Thanks in advance.
I have a package that loads staging tables from an Oracle source DB. In the data flow tab I have 30+ read table/write table task combinations. When I run the package 3-4 of the read/write combos execute at a time. What I'm trying to control is the priority order of the combo execution. My goal is to minimize to total load time by having the larger table transfers run first and the smaller table transfers fill in until they are all complete. Currently, the largest table (16 million) transfers last (because it was the last combo that I created?).
Thanks,
Dave
Hi, folks!
I got a serious problem with an SSIS-Import. My packages import from a foreign source into a kind of temp-table (actually it's not a temporary table, itīs just filled with data and truncated after completion of the package), do some transformations and then I got a data flow task that simply copies all the rows from the "temp" to the final table. I get the following errors (here there are two simultanious copy operations from two different "temps" into the same final table.
Error: 0xC0202009 at _temp to finaltable 5 2 1, OLE DB Destination [16]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Transaction (Process ID 68) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.".
Error: 0xC0209029 at _temp to finaltable 5 2 1, OLE DB Destination [16]: The "input "OLE DB Destination Input" (29)" failed because error code 0xC020907B occurred, and the error row disposition on "input "OLE DB Destination Input" (29)" specifies failure on error. An error occurred on the specified object of the specified component.
Error: 0xC0047022 at _temp to finaltable 5 2 1, DTS.Pipeline: The ProcessInput method on component "OLE DB Destination" (16) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
Error: 0xC0047021 at _temp to finaltable 5 2 1, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0209029.
Error: 0xC02020C4 at _temp to finaltable 5 2 1, OLE DB Source [1]: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
Error: 0xC0047038 at _temp to finaltable 5 2 1, DTS.Pipeline: The PrimeOutput method on component "OLE DB Source" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at _temp to finaltable 5 2 1, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
Information: 0x40043008 at _temp to finaltable 5 2 1, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DF at _temp to finaltable 5 2 1, OLE DB Destination [16]: The final commit for the data insertion has started.
Information: 0x402090E0 at _temp to finaltable 5 2 1, OLE DB Destination [16]: The final commit for the data insertion has ended.
Information: 0x40043009 at _temp to finaltable 5 2 1, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at _temp to finaltable 5 2 1, DTS.Pipeline: "component "OLE DB Destination" (16)" wrote 5041 rows.
Task failed: _temp to finaltable 5 2 1
Warning: 0x80019002 at KDStat_alles_412: The Execution method succeeded, but the number of errors raised (7) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Task failed: 412
Warning: 0x80019002 at kdstat_alles_master: The Execution method succeeded, but the number of errors raised (7) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Error: 0xC0202009 at _temp to finaltable 1 2 1, OLE DB Destination [4468]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Transaction (Process ID 82) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.".
Error: 0xC0209029 at _temp to finaltable 1 2 1, OLE DB Destination [4468]: The "input "OLE DB Destination Input" (4481)" failed because error code 0xC020907B occurred, and the error row disposition on "input "OLE DB Destination Input" (4481)" specifies failure on error. An error occurred on the specified object of the specified component.
Error: 0xC0047022 at _temp to finaltable 1 2 1, DTS.Pipeline: The ProcessInput method on component "OLE DB Destination" (4468) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
Error: 0xC0047021 at _temp to finaltable 1 2 1, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0209029.
Error: 0xC02020C4 at _temp to finaltable 1 2 1, OLE DB Source [1]: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
Error: 0xC0047038 at _temp to finaltable 1 2 1, DTS.Pipeline: The PrimeOutput method on component "OLE DB Source" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at _temp to finaltable 1 2 1, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
Well, it looks like those two processes simply deadlock each other. But there are 11 Simultanious Data Imports which all go fine. The Issue only occurs at those two. The structure of the packages is exactly the same everywhere.
Is it possible that a previous update-sql query hasenīt committed properly and locks the datasets?
I have a package that has 12 data pump tasks all executing in parallel.
It is transferring raw data from an AS400 DW to a MSSQLSvr Staging area.
Each pump task on completion assigns values to a set of global variables, then having done this passes these as parameters to a sproc which inserts them into a table.
This seems to work for 4 or 5 of the pump tasks but, the rest of the rows in the table are all the same because the remaining pump tasks are all executing before the sprocs.
Is there a way to make sure that the entire set of job steps completes, before starting another job set of steps while still keeping them running in parallel.
I had wondered if there was a way to use the PumpComplete phase of each pump step to fire off the sproc, but can't see how you execute the step.
Any ideas would be much appreciated.
I want to finsih the execution of a DTS package from an ActiveX task. If a condition is ok, the package would continue as normal. If not, I want to finish the package without any error. Just without executing the next tasks. Do you have any idea?
Thanks