Conditional Suppression Of Table Detail Row And If/then Statement

Oct 26, 2007



Two questions:


1) I am unable to get a detail row of my table to suppress. I am using:


=Iif(IsNothing(Fields!Address2.Value), True, False)


2) I am not able to get an If/Then statement to work. I am able to use the followingl; however, ideally I would want to have multiple if/else statements:


=Iif(Fields!Taxschid.Value = "CUST", 0, Fields!Selling_Price.Value*.08)



Tx
Les

View 7 Replies


ADVERTISEMENT

IIf ANY Value In Table Conditional Statement

Oct 12, 2007

This is probably quite simple, but it isn't sticking out at me.

In a simple table with two groups, I want to conditionally set the color of the first group to red or green based upon whether ANY value for this field equals a particular string.

I know how to conditionally set the color of the field. However, the below code appears to only compare the FIRST value in Fields!myField.Value to the string "bad". I want it to return "Red" if ANY of the values for Fields!myField.Value = "bad".




Code Block=IIf(Fields!myField.Value = "bad", "Red", "Green")


myField is ouput in the detail scope if that makes any difference.


Is this possible?

View 3 Replies View Related

Using Conditional Statement In Stored Prcodure To Build Select Statement

Jul 20, 2005

hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if

View 2 Replies View Related

Suppression Of Dashed Lines In Output

Jun 23, 2003

Hi All, I'm saving the output of a query into an html file. The dashed lines above rows that have a select in it are showing up in the final doc and are playing havoc with my page. Does anyone know of a command to stop them from appearing. nocount just suppresses the rows affected message. ANY help is appreciated.

Thanks!

View 1 Replies View Related

Selecting Detail Based On A Sum Of The Detail Lines

Sep 14, 2007

I am listing detail transaction lines in a table sorted by account and order number.
the problem is that I only want to see the detail if the sum of a value field is zero for all the transactions in an order otherwise ignore the detail for that order.

I was trying Group by and Having but this doesn't seem to do what I need.

Being relatively new to Reporting services, any nudge in the right direction would be useful.

View 4 Replies View Related

Conditional Where Statement

Jul 23, 2007

I have a stored procedure that performs a search function with params:@username nvarchar(50)@country nvarchar(50)and like 10 more.A user may provide values for these params optionally.So when the @username var is left blank, there should be no filtering on the username field (every field should be selected regardless of the username)Currently my statement is:select username,country from myUsers whereusername=@username and country=@countryWith this statement when a user provides no value for username the username field selects on ''m which returns ofcourse nothing...What can I do to solve this?Thanks!

View 6 Replies View Related

SQL Conditional WHERE Statement

Feb 4, 2008

Hi, is it possible to do a conditional WHERE in T-SQL? I have a table with a column that consists of a reference that starts with either a single alpha character or two alpha characters followed by four numeric digits (the numeric portion is always unique but the alpha isn’t). E.g. A1234, AB1235, AB1236, C1237, HT1238. What I want to do is select a range of rows based on the numeric portion of this reference column. In other words I want to select say 50 rows starting from row 1000 (rows 1000 to 1050) regardless of whether there is one or two alpha characters preceding the numerics.The Stored procedure I have so far works (using COUNT for testing) for selecting a range of rows that has two alpha's at the start. However, if I simply add an OR to the WHERE to select rows where there is a single alpha in the reference column, when a single alpha reference is found it will fail the first logical check for two alpha's giving an error condition. Therefore, how can I incorporate a conditional WHERE using IF or some alternative method, so that it will also give me all the rows in the number sequence that start with either single or double alpha's within the same SELECT / WHERE statement?

Thanks for any help.ALTER PROCEDURE [dbo].[sp_Test]

(
@startRef int,
@endRef int
)

AS

BEGIN

SELECT Count(*) FROM myTable
WHERE ((SUBSTRING(Ref,3,LEN(Ref)-2) BETWEEN @startRef AND (@startRef + @endRef)))

END
RETURN
 

View 2 Replies View Related

Conditional WHERE Statement?

Jul 23, 2005

Hi all,I have one for all the blackbelters out there: is there a way i canmake a stored procedure where i can control the where statement withvariables? I have to do some complex transformations to get compose afact table for MSAS and there a a lot of similarities between thequeries and a few differences because of different account methodsetc. (booking in starting date, booking stuff on order entry datesetc) I want to put a combination of different rules in differentmembers of dimensions.An example of what i mean:CREATE STORED PROCEDURE dbo.FILLFACT (@PAR1, @PAR2)ASINSERT INTO FactTable (blah blah)SELECTIF @PAR1 = 'OrderDate'SourceView.OrderdateELSESourceView.StartDate,etc etc...FROMSourceViewWHEREIF @PAR2 = 'WholeTable'1=1IF @PAR2 = 'Incomplete'EndDate IS NULL OR EXIST (SELECT * FROM Exceptions WHERE...., etc)This way i could fill my fact table withEXEC dbo.FillFact 'beginDate','Wholetable'EXEC dbo.FillFact 'begindate', 'Rulebook1'EXEC dbo.FillFact 'BeginDate', 'Exceptions'etcetera.This is not an actual SQL script i use, just an example of what i'mtalking about. Or maybe i could pass the where statement entirley as avariable? But i can't use SET @PAR1 = 'EndDate IS NULL' and then useWHERE @PAR1 can I?I hope i'm making sense. Does anyone know if this is possible? Rightnow i have a procedure that is composed of a dozen of sql scripts thatare mostly the same, but i have to copy it for every combination ofsituations and then, of course, new stuff has to be added on 12different places. Again and again.Any thoughts?TIA,Gert-Jan van der Kamp

View 2 Replies View Related

Conditional Statement! HELP!

Nov 22, 2007

Hi, I've been looling around, but was unable to correctly use a conditional statement in a T-SQL Query.
I have this SQL query and in it how I would do if it was C#. If someone could please help me get
what I need I would appreciate it a lot. Here is the query:




Code Block

SELECT Ficha, Almoxarifado, [Código do Item], Descrição, Unidades.Unidade,
[1ª Contagem], [2ª Contagem], Recontagem, Observações, Cancelar FROM Fichas
INNER JOIN Itens ON [Código do Item] = Código
INNER JOIN Unidades ON Itens.Unidade = Unidades.ID
WHERE Ficha BETWEEN 01 AND 5000 AND Recontagem IS NULL AND

/* What I would do in C#, but need in T-SQL*/
if ([1ª Contagem] > [2ª Contagem])
{

if ([2ª Contagem] / [1ª Contagem] < 0.99)

return true;
else
{

if ([1ª Contagem] / [2ª Contagem] < 0.99)

return true;
}






I really need a help in this. Does anyone know how to accomplish this?
Thanks.
Regars,
Fábio

View 3 Replies View Related

Count From Detail Table

Feb 20, 2008

HiI've two tablesTableAidnameTableBidtableA_iddescoperAs you can see tableA is a master and tableB is a detail table wherewe can have many records for each related tableA record.I need to get all records for tableA with a count on some oper oftableB.I suppose I can got it with a join or a subselect but I don't use SQLoften so I'm getting crazy with this stupid query...Could somebody help ?Thanks in advanceC

View 2 Replies View Related

Get One Row From Detail/child Table

Jul 20, 2005

Hi,-- ddl/*create table #tmp (col1 int);insert into #tmp values(1);insert into #tmp values(2);insert into #tmp values(3);create table #tmpChild (col1 int, fkCol int, Num int);insert into #tmpChild values(1,1,3);insert into #tmpChild values(2,1,2);insert into #tmpChild values(3,2,1);*/-- get parent and child data (outer join)select *from #tmp t Left Outer JOIN #tmpChild tCON t.col1 = tC.fkCol-- resultset/*/col1 col1 fkCol Num----------- ----------- ----------- -----------1 1 1 31 2 1 22 3 2 13 NULL NULL NULL(4 row(s) affected)*/-- desired resultset/*/col1 col1 fkCol Num----------- ----------- ----------- -----------1 1 1 3-- eleminate next row, want only Max(Num) row from the child tbl withsame FK (parentID)-- 1 2 1 22 3 2 13 NULL NULL NULL*/In other words, desired results is as follows:/*/col1 col1 fkCol Num----------- ----------- ----------- -----------1 1 1 32 3 2 13 NULL NULL NULL*/How to accomplish this task? ENV: MS SQL Server 2000TIA

View 1 Replies View Related

Charting Table Detail And Sum

Dec 13, 2005

I have a bar chart that displays the detail of a table with locations along the x-axis and number of employees on the y-axis. Is there any way to have the sum of all of the locations show as the final bar in the chart? (which would be the footer in the table)

View 3 Replies View Related

Using The IF EXISTS Conditional Statement

Apr 5, 2007

I'm trying to gather some user statistics based on 3 conditions. First I want to check if the referring querystring is already in the database. If not insert it into the db. Second, if the querystring is already in the database, then check if the ip-address of the user is already in the database. If it is, then check if the ip address was inserted today. If not, update the "refCountIn" field with +1. The problem lies in the third condition where we check if the ip-address was inserted today and if false, update the "refCountIn" field with +1 and if true, do nothing.Below is the code I have until now:  1 Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
2
3 ' *** Declare the variables
4 Dim getStatCmd As String
5 Dim updStatCmd As String
6
7 Dim myRef As String = Request.QueryString("ref")
8 Dim myQueryString As String = Request.ServerVariables("QUERY_STRING").Replace("ref=", "")
9 Dim myRemoteAddr As String = Request.ServerVariables("REMOTE_ADDR")
10 Dim myHttpReferer As String = Request.ServerVariables("HTTP_REFERER")
11
12 Dim dtNow As Date = DateTime.Now
13 Dim dtToday As Date = DateTime.Today
14
15 ' *** Conditional INSERT command
16 getStatCmd = _
17 "IF EXISTS(SELECT 'True' FROM tblReferers WHERE robotName = '" & myQueryString & "' AND refIpAddress = '" & myRemoteAddr & "' AND refTime = '" & dtToday & "') " & _
18 "BEGIN " & _
19 "SELECT 'This clickin has already been recorded!'" & _
20 "END ELSE BEGIN " & _
21 "SELECT 'Clickin recorded' " & _
22 "INSERT INTO tblReferers(robotName, refIpAddress, refReferer, refTime) " & _
23 "VALUES(" & _
24 "'" + myQueryString + "'," & _
25 "'" + myRemoteAddr + "'," & _
26 "'" + myHttpReferer + "'," & _
27 "'" + dtToday + "')" & _
28 "END "
29
30
31 ' *** Conditional UPDATE command
32 updStatCmd = _
33 "IF EXISTS(SELECT 'True' FROM tblReferers WHERE robotName = '" & myQueryString & "' AND refIpAddress = '" & myRemoteAddr & "' AND refTime <> '" & dtToday & "') " & _
34 "UPDATE tblReferers " & _
35 "SET refCountIn = refCountIn + 1, refTime = '" & dtNow & "' " & _
36 "WHERE refIpAddress = '" & myRemoteAddr & "' AND robotName = '" & myRef & "'"
37
38 Dim insConnCmd As New SqlCommand(getStatCmd, New SqlConnection(connSD))
39 Dim updConnCmd As New SqlCommand(updStatCmd, New SqlConnection(connSD))
40
41 insConnCmd.Connection.Open()
42 insConnCmd.ExecuteNonQuery()
43 insConnCmd.Connection.Close()
44
45 updConnCmd.Connection.Open()
46 updConnCmd.ExecuteNonQuery()
47 updConnCmd.Connection.Close()
48
49 End Sub
Anyone with an idea on how to solve this one? I think I need to write a subquery for the third condition, but I don't have a clue on how to handle this.Thanks in advance for your help! 
 

View 2 Replies View Related

SQL Help: Conditional Statement Using Inserted

Oct 29, 2007

I'm learning SQL and here I'm trying to use two things that I'm not familiar with - IF statements and the Inserted temporary table.
Here's the background - skip this paragraph if you like. I'm working on a tasking system for the Help Desk - they get requests from the web site for various items and I break up the request into Software, Hardware, Accounts, etc tables and list the status of each item as "Requested". I'm also keeping a Tasks table to make work orders for each item requested. I've got triggers on the Accounts and Hardware tables that automatically make a new task for those items but the Software is more tricky because all software for a given request should be just one task. Software installs are all done by one person at the same time.
So I'm trying to make a trigger that creates a new Task when a new Software record is inserted. But if a task already exists with the same RequestID (meaning they requested two peices of software and this is the second one), then I just want to update the task already created. Here's what I got:
 1 CREATE TRIGGER [NewSoftwareTask]
2 ON [dbo].[Software]
3 AFTER INSERT
4 AS
5 BEGIN
6
7 -- If a software task already exists for this request
8 -- then update it. Otherwise create a new task.
9
10 if exists(select TasksID
11 from Tasks
12 where Tasks.RequestsID = inserted.RequestsID and
13 TasksType = 'Software')
14 BEGIN
15 UPDATE [BGHelpdesk].[dbo].[Tasks]
16 SET [TasksDescription] = [TasksDescription] + vbcrlf + "Install " + inserted.SoftwareType + ". " + inserted.SoftwareComments
17 WHERE Tasks.RequestsID = inserted.RequestsID and
18 TasksType = 'Software'
19 END
20
21 else
22
23 BEGIN
24 INSERT INTO [BGHelpdesk].[dbo].[Tasks]
25 ([RequestsID]
26 ,[TasksType]
27 ,[TasksSubType]
28 ,[TasksTitle]
29 ,[TasksDescription])
30 SELECT
31 s.RequestsID
32 ,'Software'
33 ,s.SoftwareType
34 ,'New ' + s.SoftwareType + ' Account for Request ' + cast(s.RequestsID AS varchar)
35 ,s.SoftwareComments
36 FROM Software s join
37 inserted ON s.SoftwareID = inserted.SoftwareID
38 END
39 END
40 GO

It keeps balking at lines 12 and 17 saying "The multi-part identifier "inserted.RequestsID" could not be bound." The ELSE statement is what I use on the other tables and it works fine so the inserted temp record seems pretty straightforward but I must be doing something wrong...

View 4 Replies View Related

Using Conditional Statement In Where Clause

Mar 26, 2012

I'm trying to use a conditional statement in the where clause.

Here is my table
UID Amount ID PID Amount2
1 30000 8064 NULL NULL
2 30000 8042 8064 30000

What I'm trying to achieve:

If Amount = Amount2 for UID 2 then show UID 1

View 4 Replies View Related

Conditional Select Statement

Mar 23, 2004

Hello dbForumers,

Yet another puzzling question. I remember I saw somewhere a particular syntax to select a column based on a conditional predicate w/o using a user defined function. What I want to accomplish is this : SELECT (if column colA is empty then colB else colA) as colC from SomeTable. Possible ? Not possible? Have I hallucinated ?

Thank You!

View 6 Replies View Related

Conditional Sum With Select Statement

Feb 24, 2014

Table with water consumption per month and customer.

I want to sum up total consumption per customer with a select statement

View 4 Replies View Related

Adding Conditional Statement To A Sum

Jun 12, 2007

currently I am creating a total if the date is between two entered dates:

select sum(case when exigo_data_sync.orders.orderdate between @prevMonthStart and @prevMonthEnd then 1 else 0 end) as PrevMonthCount,

I need to check an additional column for ($1.00) or $1.00. If it contains $1.00 then proceed as normal and add to the total. If it contains ($1.00) then subtract one from the total. Any advice?

View 7 Replies View Related

If Conditional Statement Replacement

Oct 2, 2007



Hi,
Is there a work around for the following query on sql server compact edition


IF(Some Condition) --

BEGIN


INSERT INTO @TEMP

SELECT 1, XYZ_ID FROM My_Table

END


Thanks,
Dp

View 3 Replies View Related

Tranact SQL : Get Total Of Detail Table

Jan 28, 1999

Hi,

I have a master and a detail table as defined :

Master : tmpOrder

Column_name Type
------------------------------ ------------------------------
OrderID int
Date DateTime

Detail : tmpOrderItem

Column_name Type
------------------------------ ------------------------------
OrderID int
Seq int
Qty float
Amount float

How can I get the master fields and sum of qty and amount in one query. I need the following result set

OrderID Date TotalQty TotalAmount
-------------- ---------- ---------- --------------

Thank you in advance
Allex

View 1 Replies View Related

Master/Detail Table Insertion.

Sep 20, 2007

Hi Experts,

I need to know the best approach to save data in master table and then in detail table.
I know this method but i know it's not a good approach why i will explain

Insertion in Master Table..................................... A

Insertion in Detail Table........................................B

Now if there is any exception occurred while step A then the step B will not take place which is ok but if there is exception while step B then the process A will have completed
i.e the data in master table will be Inserted/Deleted/Updated but there will not be a corresponding action in Detail table which is not good approach.

So please can any one tell me a good approach for this.

View 6 Replies View Related

Conditional Statement In View Design

Apr 10, 2008

Have a View where I need to enter a conditional IF_THEN_ELSE statement in a new field (field has an alias). If this were an Access query I would do following:

IIf([dbo.AR1_CustomerMaster.EmailAddress] Is Null, "A", "B")

How can I accomplish same in View design??

View 2 Replies View Related

Case Conditional In SQL Statement 2000

Jul 20, 2005

Hi,I'm trying to do calculations in a SQL statement, but depending on onevariable (a.type in example) I'll need to pull another variable fromseperate tables.Here is my code thus far:select a.DeptCode DeptCode,a.Type Type,(a.ExpenseUnit / (select volume from TargetData b where b.type =a.type)) ExpenseFromcalc1 aThe problem... a.Type can be FYTD, Budget, or Target... and dependingon which one it is, I need to make b either FYTDData, TargetData, orBudgetData. I'm thinking a case statement might do the trick, but Ican't find any syntax on how to use Case in an MS SQL statement. EvenIf statements will work (if that's possible), though case would beless messy.Any suggestions would be much appriciative. Thanks...Alex.

View 4 Replies View Related

TSQL: Conditional Union Statement

Jul 20, 2005

Is it possible to have a conditional union statement in a stored proc?Here's an example on the northwind database. If says there's a syntaxerror near the UNION statement. Looks like it doesn't like having theBEGIN directly in front of it.Is the only solution to create a dynamic sql string then call exec onit?Any help appreciated.Tom.CREATE PROCEDURE usp_test(@both int = 1)ASSET NOCOUNT ONSELECT * FROM territories WHERE regionid = 1IF @both = 1BEGINUNIONSELECT * FROM territories WHERE regionid = 2ENDGO

View 5 Replies View Related

Summing Items From A Conditional Statement

Jun 29, 2007

What I need to do in seperate a group of numbers into two different categories based on a phase code. I have acheived this through two conditional statements, but when I try to total the numbers that were returned for each group I receive an #error.



This is an example of the switch statement I used in order to return the correct values for the Implemenataion.



=Switch(Fields!Phase_Code.Value="PILOT", Fields!LedgerQuantity.Value, Fields!Phase_Code.Value="DATAMIGRAT", Fields!LedgerQuantity.Value/2, 1=1, "")



I've tried several different methods for aggregating the numbers that are returned.



=SUM(Switch(Fields!Phase_Code.Value="PILOT", Fields!LedgerQuantity.Value, Fields!Phase_Code.Value="DATAMIGRAT", Fields!LedgerQuantity.Value/2, 1=1, ""))



I've tried substituting a 0 in for the "" at the end of each statement. I've also tried to take the first statement and put it into its own table field named ImplementationLedger, and them summing it. ie. =SUM(Fields!ImplementationLedger.Value)



Please Help!

View 1 Replies View Related

Conditional Where Clause W/ Case Statement Possible?

Sep 25, 2007

Greetings,

After many hours search many forums and many failed experiments, I figure it's time to turn to the experts.

I need to execute a query that changes the returned data based upon a parameter's value. In my example below, the lob field contains both text values and nulls.


SELECT uniqueID, lob, xdate
FROM mytable
WHERE

CASE WHEN @myparam = 'ALL'

THEN

xdate >= '2007-09-01'
ELSE

xdate >= '2007-09-01' or
lob = @myparm
END

I've experimented with various forms of the LIKE function, checking for null/not null and keep coming up blank.

I thought about using an IF statement and creating different versions of the entire statement, however, in real-life I need to do this with four fields using four parameters (one for each field). The permutations are a little too much.

Any ideas?

Rob

View 8 Replies View Related

Main And Detail Table Amount Calculations

Oct 31, 2006

Hi all,

I have a 2 main tables in my system. One is main table has ticket information location and so on. And detail table which hold all actions on that record with multiple money fields (its around 5 fields). it goes trough some crazy calculations on the detail table and get 5 results for each ticket. And this calculation is done everytime the ticket is looked at.
There is around 10 detail records per 1 main record. and the main table is around 7 mil. records

Now i got 2 options. I can create a trigger that does the calculation and update the main table show the results from there. This is going to affect all updates deletes and inserts.

OR

I can leave as it is so only when they view the ticket it does the calculation. Dont ask me how often they view it i dont have a clue.( if there is any suggestion how to get the count i could try to do it. )
:confused:
Suggestions

(My attitude is going towards the trigger way but 100 percent sure)

View 4 Replies View Related

Retrieving Only 50 Chars From Detail Table Of Comments

Jan 25, 2012

I have a detail table of comments. I need to grab the fist 50 characters from the comment field from this table. The kick is that I need to get the comments from all of the records in the detail table, as the comments might be less than 50 characters, so i need to pull the comments from the other comment records that apply to the master table record.

right now i have the comments in a join to the master table, but this is causing a few records to be returned....

I guess what i am looking for is a way to grab the comment value from the first record of the detail table.

View 1 Replies View Related

In Master And Detail Table Fetch Record.

Jun 24, 2008

Dear Sir
Thank for your reply but our requirements are not this
I am fully explain my requirements

In Master table have 5 columns; In Master Table stored all records.

NameAppidFunctionCodeFunNameSubFunCode
Ad630Manual0
Ad630Log10
Data810Summary0
Data820View0
Data830&View0
Data840Row10
Ad630Mbl20



In second Table store those records who are selected and stored in 2nd table.
NameAppidFunctionCodeFunNameSubFunCode
Data810Summary0
Data820View0
Data830&View0
Ad630Mbl20


Our requirements we use one query,
In query fetch total 5 rows. and output show like this

NameAppidFunctionCodeFunNameSubFunCode
Ad630Manual0N
Ad630Log10N
Data810Summary0Y
Data820View0Y
Data830&View0Y
Data840Row0N
Ad630Mbl20Y


Please immediate reply me,
I am waiting your reply.
Thanks Asit Sinha

View 3 Replies View Related

Conditional Statement With A Cast From String To Date

Feb 5, 2007

My source file is showing column 10 as string. My destination table is datetime. I am using the derived transformation with a conditional statement. How do I convert the value from string to date. Everywhere I try the (DT_DATE) I get an error.

[Column 10] == "01/01/0001" ? " 01/01/1801" : [Column 10] <= "12/31/1801" ? "12/31/1801" : [Column 10]

View 9 Replies View Related

Insert Master/Detail Table Using Store Procedure!!!

Oct 1, 2007

now i want to learn how to make a stored procedure to insert a record to `purchase` table, and many records to `purchase_detail` table with transaction where the some value are passed from vb6 through the parameters. i've made a SP to insert 1 record to `purchase` table n 1 record to `purchase_detail` just for testing, so i set the disc value to 10. it works fine... --------------------------------------------------------------------------------- CREATE PROCEDURE `usp_save_purchase`(xpurch_id VARCHAR(10), xpurch_date VARCHAR(10), xsupp_id VARCHAR(10), xitem_id VARCHAR(10), xqty TINYINT(3), xprice DOUBLE(15,2)) BEGIN START TRANSACTION; INSERT INTO purchase(purch_id,purch_date,supplier_id) VALUES(xpurch_id, xpurch_date, xsupplier_id); INSERT INTO purchase_detail(purch_id,item_id,qty,price,disc) VALUES(xpurch_id, xitem_id, xqty, xprice, 10); COMMIT; END --------------------------------------------------------------------------------- what i need is something like that but i only pass 3 variables (purch_id, purch_date, and supp_id) to SP, and then the SP will insert 1 record of purchase to `purchase` table, and add the purchase items to `purchase_detail` automatically from `purch_temp` table, and use the disc rate based on `supplier_id` and `item_id` from supplier_disc table, which will be looked something like this: --------------------------------------------------------------------------------- CREATE PROCEDURE `usp_save_purchase`(xpurch_id VARCHAR(10), xpurch_date VARCHAR(10), xsupp_id VARCHAR(10)) BEGIN START TRANSACTION; INSERT INTO purchase(purch_id,purch_date,supplier_id) VALUES(xpurch_id, xpurch_date, xsupplier_id); /*start looping here get the disc rate for each items where supp_id = xsupplier_id and item_id = the item_id from purch_temp table, and save it in a local variable (let's say local_disc) INSERT INTO purchase_detail(purch_id,item_id,qty,price,disc) VALUES(xpurch_id, xitem_id, xqty, xprice, local_disc); */ COMMIT; END --------------------------------------------------------------------------------- can anyone help me please? thank you in advance...

View 1 Replies View Related

Transform Header And Detail Flat File Into One Table

Sep 13, 2007

I have a flat file with header and detail information, it is actually employee punch card data. I need to parse the header line which contains the Employee ID and don't save it to a table just save the value. Then with the detail line, parse the different data elements and save them along with the employee ID to one table. Then continue until the next header line is read.


The file looks something like this:

FINNEY,RONNIE 0001005420
Mon 09/03 700a HOL 8.00
Tue 09/04 630a*E 326p 8.50 8.50
Wed 09/05 645a 330p 8.00 16.50
Thu 09/06 639a 2.40 18.90
HALL,MARK 0001005601
Mon 09/03 700a HOL 8.00
Tue 09/04 608a*E 257p 8.40 8.40
Wed 09/05 601a*E 259p 8.50 16.90
Thu 09/06 606a*E 3.30 20.20
JONES,WILLA JEAN 0001005702
Mon 09/03 700a HOL 8.00
Tue 09/04 556a*E 326p 9.10 9.10
Wed 09/05 600a*E 328p 9.00 18.10
Thu 09/06 554a*E 3.50 21.60

So I think I need a data flow transformation object that let's me save the Employee ID into a variable available when the next record is read. What type of transformation would be best?

View 1 Replies View Related

MS Access Vs. Transact-SQL – Conditional SQL Select Statement Problem

Dec 13, 2004

Hi All,

I am trying to write a Transact-SQL statement and am having no success. I have a customers table that has some duplicate Customer Numbers in it, however the records do have a unique Reference Number. I am trying select all records that match a list of Customer Numbers but if there are more than 1 matching Customer Number I only want the one with the largest Reference Number.

My BASIC Select Statement is:

SELECT Cust_Ref_No, Customer_No, Customer_Name, Address1,
Address2, Suburb, State, Postcode, Phone
FROM Customers
WHERE Customer_No IN
(SELECT Customer_No FROM temp_Customers)

Much to my HORROR I found that what I am trying to do is simple in MS Access using the “First” Function – Such as below:

SELECT First(Cust_Ref_No) AS Cust_Ref_No, Customer_No
FROM Customers
GROUP BY Customer_No
ORDER BY First(Cust_Ref_No), Customer_No;

There appears to be no “First” Function in Transact-SQL. Is someone able to show me how to achieve the same results in Transact-SQL as I can get with MS Access (I’d HATE to think that MS Access has more functionality in querying data than SQL Server in any way at all)?

P.S. I really need to run the select statement as one step rather than splitting it up into parts.

Regards, Trog28

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved