Hi,
I want to create a trigger that that is invoked when a certain condition is fulfilled. For instance:
I have 2 tables, PS and US with similar table structure. PS table contains a column called 'status'. Whenever the status column is updated from 2 to either 23, 24, 25 or 26, a new row, which contains the same data within the updated row of PS, will be inserted into the table US.
Can this be done? Thanks in advance.
I have a sitemapcache that caches nodes with a sqlcachedependency. Everything is working fine but one thing. Every time you visit a forum, the viewcount is changed, therefore raising the trigger and dropping my cache object. How do i make it so that the trigger is only fired if I update the Title or Description field? ALTER TRIGGER [dbo].[sp_Forums_Topics_AspNet_SqlCacheNotification_Trigger] ON [dbo].[sp_Forums_Topics] FOR INSERT, UPDATE,DELETE AS BEGINSET NOCOUNT ONEXEC dbo.AspNet_SqlCacheUpdateChangeIdStoredProcedure N'sp_Forums_Topics'
END
My goal is to create a trigger to automatically set the value for a status id on a table based on set criteria. Depending on the values of other fields will determine the value that the status id field is assigned. So far, I have written the trigger to update the status id field and I go through a seperate Update statement for each status id value. The problem is that I can't get this to work at the record level. The problem that I am getting is that if I have 50 records in TABLE1 and at least one of them satisfies the where clause of the update statement, all of the records get updated. So, using these two update statements, all of my records end up with a status value of '24' because that was the last update statement run in the trigger. Here is the code I have so far:
CREATE TRIGGER dbo.JulieTrigger1
ON dbo.Table1
AFTER INSERT,UPDATE
AS
BEGIN
BEGIN TRY
/*Update Table1.Status to POTENTIAL (id 23) status */
UPDATE TABLE1
SET status_id = 23
WHERE EXISTS (SELECT *
FROM TABLE1 a INNER JOIN TABLE2 b
ON b.order_id = a.order_id
WHERE a.start_dt IS NULL
AND b.current_status_ind = 1
AND b.lead_status_id NOT IN (15,16)
AND a.order_id = TABLE1.order_id)
/*Update Table1.Status to ACTIVE (id 24) status */
UPDATE TABLE1
SET status_id = 24
WHERE EXISTS (SELECT *
FROM TABLE1 a
WHERE fill_ind = 1
AND (end_dt IS NULL OR end_dt > getdate() )
AND a.job_order_id = TABLE1.job_order_id)
END TRY
BEGIN CATCH
DECLARE @ErrorMessage NVARCHAR(4000);
DECLARE @ErrorSeverity INT;
DECLARE @ErrorState INT;
SELECT
@ErrorMessage = ERROR_MESSAGE(),
@ErrorSeverity = ERROR_SEVERITY(),
@ErrorState = ERROR_STATE()
IF @@TRANCOUNT > 0
ROLLBACK TRAN
-- Return the error to the calling object
RAISERROR (@ErrorMessage, -- Message text.
@ErrorSeverity, -- Severity.
@ErrorState -- State.
)
END CATCH
SET NOCOUNT ON;
END
GO
Thanks in advance for any help!
-Julie
My question is fairly simple. When I join between two tables, I always use the ON syntax. For example:
SELECT
*
FROM
Users
JOIN UserRoles
ON (Users.UserRoleId = UserRoles.UserRoleId)
No problems there. However, if I then decide to further filter the selection based on some trait of the UserRole, I have two options: I can add the condition as a WHERE statement, or I can add the condition within the ON block.
--Version 1:
SELECT
*
FROM
Users
JOIN UserRoles
ON (Users.UserRoleId = UserRoles.UserRoleId)
WHERE
UserRoles.Active = 'TRUE'
-- Version 2
SELECT
*
FROM
Users
JOIN UserRoles
ON (Users.UserRoleId = UserRoles.UserRoleId
AND UserRoles.Active = 'TRUE')
So, the question is, which is faster/better, if either? The Query Analyzer shows the two queries have the exact same execution plan, which makes sense, since they're both joining the same tables. However, I'm wondering if adding the condition in the ON statement results in fewer rows the JOIN statement initially needs to join up, thus reducing the overall initial size of the results table before the WHERE conditions are applied.
So is there a difference, performance wise? I imagine that if Users had a thousand records, and UserRoles had 10 records, then the JOIN would create a cartesian product of the two tables, resulting in 10,000 records in the table before the WHERE conditions are applied. However, if only three of the UserRoles is set to Active, would that mean that the resulting table, before applying WHERE conditions, would only contain 3000 records?
Thanks for whatever information you can provide.
I have a table
CREATE TABLE [dbo].[CmnLanguage]( [Id] [char](2) NOT NULL CONSTRAINT PkCmnLanguage_Id PRIMARY KEY, [EnglishName] [varchar](26) NOT NULL, [NativeName] [nvarchar](26) NOT NULL, [DirectionType] [smallint] NOT NULL, [IsVisible] [bit] NOT NULL, [CreatedDateTime] [datetime] NOT NULL DEFAULT GETDATE(), [ModifiedDateTime] [datetime] NULL)
We will use these 3 queries
select * from CmnLanguage where IsVisible = 0select * from CmnLanguage where IsVisible = 1select * from CmnLanguage
I want to make a method which handles these queries.
But at the back end on Stored Procedures
We have to write 3 queries
Which I don't want to do.
I want to minimize the queries and conditions
and want to just write one for these 3
Can any one do it?
Folks,
I'm having some real problems using the OR condition in a very simple SQL statement and could use your help or insight on where the problem lies, or perhaps a workaround.
I have a large flat table in a SQL 7 database with 10 million + records called "HISTORY". I have not installed either service pack 1 or 2. I'm attempting to run a query that references the following four fields which are all non-clustered keys:
EQUIPMENT_NO TEXT 12
CHASSIS_IN TEXT 12
CHASSIS TEXT 12
SVC_DATE_TIME SMALLDATETIME
Here's the SQL statement:
SELECT * FROM HISTORY WHERE (HISTORY.EQUIPMENT_NO = 'XYZ123' OR HISTORY.CHASSIS = 'XYZ123' OR HISTORY.CHASSIS_IN = 'XYZ123') AND SVC_DATE_TIME >= '01/15/00 00:00:00 AM' AND SVC_DATE_TIME <= '02/28/00 23:59:59 PM'
ORDER BY EQUIPMENT_NO
This query takes 11 min. 5 sec. inder the Query Analyzer and ultimately returns the 31 desired records.
If you remove the SVC_DATE_TIME criteria, about 350 records are returned in a matter of seconds. I've also tried variations on the date syntax such as '01/15/00', etc. with no change in the amount of time to execute.
Other queries such as a simple AND condition combining EQUIPMENT_NO and SVC_DATE_TIME are snappy.
Are there known problems/bugs with "OR" conditions in queries that anyone is aware of, particularly with parentheses; am I composing this query incorrectly? Is there some alternate syntax that would work as expected? I can't see where the query shouldn't execute quickly as expected, particularly with all indexed fields involved. I'm stumped! Lend me your expertise. Thanks much.
Clark R. Farabaugh, Jr.
Financial Systems Analyst
VIT
Norfolk, VA
Hai frns small help needed.
I have a table called sample and i have the following requirement. i.e i need sum(credit) group by ssn no.
One special condition is as follows:
For each distinct ssn if "flag" has the same CX value,then out of all the records with the same CX value, the highest "credit" value is added to the sum for that "ssn" and the rest are ignored.
If while adding "credit" to the sum and if "credit" value is equal to zero then "sum" value is used for summing else "credit" value is used.
Can any one help me out in trying this logic. I have tried but i could'nt able embed the conditions inbetween the Sql statetment.
Here is the query is used
select * from sample
idssncreditflagsem
11010C90
21014C93
31014.5C92
41013.5C11
51024.2C33
61030C12
select ssn,flag,sum(case credit when 0 then sem else credit end) as sum from sam2
group by ssn,flag
ssn flag sum_val
101C13.5
103C12.0
102C34.2
101C98.5
The above output is wrong one.
Expected output
101 4.5+3.5=8.0
102 4.2
103 2.0
Any help would be appreciated
Regards,
Code:
Drop table #table
Drop table #table_with_groupid
-- Prepare test data
CREATE TABLE #table
([Admissions_key] bigint NOT NULL PRIMARY KEY,
MRN nvarchar(10) NOT NULL,
[Code] ....
How can I compare dates with conditions. I only want to Mark C where the difference between adm_datetime and prevsep_datetime is <= 1 otherwise E as well
where datediff(MINUTE,tg.adm_datetime,tg.pre_sep_date)< =1 ??
is it correct ? where should I put this to implement correctly ?
I have the following:
MAX(Vernum) AS test,
MAX(Case WHEN A2.AttrID = 2 AND A2.DefID = 10057945 THEN A2.ValStr END) AS TYPE_DOCUMENT
This works not perfect. In many cases I have more then one row and my query takes the max value of column Valstr. Thats is not exactly what I want. I'd like to have the value of Column Valstr of the row where column Vernum has the maximum value.
I've tried many things like:
MAX(Vernum) AS test,
MAX(Case WHEN A2.AttrID = 2 AND A2.DefID = 10057945 AND A2.Vernum=test THEN A2.ValStr END) AS TYPE_DOCUMENT
OR
MAX(Vernum) AS test,
MAX(Case WHEN A2.AttrID = 2 AND A2.DefID = 10057945 AND A2.Vernum=MAX(A2.Vernum) THEN A2.ValStr END) AS TYPE_DOCUMENT
Hi All.
Is there a way to have multiple AND conditions on the same field in a database.
EXAMPLE
SELECT * FROM tbl
WHERE field1 = 1 AND field1 = 2 AND field1 = 5
Thanks
pls:
1/ can we do it this way:
inner join Table2 ON table1.fld1=table2.fld21 AND table1.fld12=table2.fld22
2/also:
what s the difference between join , iner join and left join
Thanks .
ALTER PROC usp_t_insup_cpa1
@Idint,
@SupervisorIdint,
@BookmarkerIdint,
@PreparerIdint,
@FirmNovarchar(20),
@FirmNamevarchar(30),
@FirstNamevarchar(20),
@MiddleNamevarchar(20),
@LastNamevarchar(20),
@TaxYearvarchar(20),
@TaxSoftwarevarchar(20),
@HomePhonevarchar(20),
@WorkPhonevarchar(20),
@Faxvarchar(20),
@PrimaryEmailvarchar(30),
@SecondaryEmailvarchar(30),
@CountryIdint,
@Statevarchar(20),
@Zipcodevarchar(20),
@Statusint,
@OperatorChar(1) = '',
@RESULTINT OUTPUT
-------------------------
AS
IF @Operator = 'I'
BEGIN
IF NOT EXISTS(SELECT * FROM CPA WHERE PrimaryEmail=@PrimaryEmail or PrimaryEmail=@SecondaryEmail or SecondaryEmail=@PrimaryEmail or SecondaryEmail=@SecondaryEmail )
BEGIN
--select * from o_login
Begin transaction InsCPA
INSERT INTO CPA(SupervisorId,BookmarkerId,PreparerId,FirmNo,FirmName,FirstName,MiddleName,LastName,TaxYear,TaxSoftware,HomePhone,WorkPhone,Fax,PrimaryEmail,SecondaryEmail,CountryId,State,Zipcode,Status)
VALUES(@SupervisorId,@BookmarkerId,@PreparerId,@FirmNo,@FirmName,@FirstName,@MiddleName,@LastName,@TaxYear,@TaxSoftware,@HomePhone,@WorkPhone,@Fax,@PrimaryEmail,@SecondaryEmail,@CountryId,@State,@Zipcode,@Status)
--Error handling
IF @@ERROR <> 0
BEGIN
-- Returns 0 to the calling program to indicate failure.
ROLLBACK TRAN InsCPA
SET @RESULT = 0
END
ELSE
BEGIN
--DECLARE @ID1 INTEGER
-- Returns 1 to the calling program to indicate success.
COMMIT TRAN InsCPA
SET @RESULT = 1
END
END
ELSE
BEGIN
-- Return 2 to the calling program to indicate record already exists.
set @RESULT = 2
END
END
ELSE IF(@Operator='U')
BEGIN
declare @pemail as varchar(30)
declare @semail as varchar(30)
declare @firm as varchar(20)
select @pemail=PrimaryEmail,@semail=SecondaryEmail,@firm=FirmNo from CPA WHERE Id = @Id
--select * from CPA
if(@pemail=@PrimaryEmail) or(@semail=@PrimaryEmail)--or((@semail=@SecondaryEmail)and (@semail=@PrimaryEmail)))
begin
print 'prim1'
if(@semail=@SecondaryEmail)or (@pemail=@SecondaryEmail)
begin
print 'sec1'
if(@firm=@FirmNo)
begin
print'firm'
BEGIN TRANSACTION UpdateCPA
UPDATE CPA
SET SupervisorId=@SupervisorId,
BookmarkerId=@BookmarkerId,
PreparerId=@PreparerId,
FirmNo=@FirmNo,
FirmName=@FirmName,
FirstName=@FirstName,
MiddleName=@MiddleName,
LastName=@LastName,
TaxYear=@TaxYear,
TaxSoftware=@TaxSoftware,
HomePhone=@HomePhone,
WorkPhone=@WorkPhone,
Fax=@Fax,
PrimaryEmail=@PrimaryEmail,
SecondaryEmail=@SecondaryEmail,
CountryId=@CountryId,
State=@State,
Zipcode=@Zipcode,
Status=@Status
WHERE Id = @Id
UPDATE EMPLOYEE
SET FirmNo=@FirmNo
WHERE FirmNo=@firm
IF @@ERROR <> 0
BEGIN
-- Returns 0 to the calling program to indicate failure.
ROLLBACK TRAN UpdateCPA
SET @RESULT = 0
END
ELSE
BEGIN
-- Returns 1 to the calling program to indicate success.
print'1'
COMMIT TRAN UpdateCPA
SET @RESULT = 1
END
END
else
begin
IF NOT EXISTS(SELECT * FROM CPA WHERE FirmNo=@FirmNo)
BEGIN
print'fd'
BEGIN TRANSACTION UpdateCPA
UPDATE CPA
SET SupervisorId=@SupervisorId,
BookmarkerId=@BookmarkerId,
PreparerId=@PreparerId,
FirmNo=@FirmNo,
FirmName=@FirmName,
FirstName=@FirstName,
MiddleName=@MiddleName,
LastName=@LastName,
TaxYear=@TaxYear,
TaxSoftware=@TaxSoftware,
HomePhone=@HomePhone,
WorkPhone=@WorkPhone,
Fax=@Fax,
PrimaryEmail=@PrimaryEmail,
SecondaryEmail=@SecondaryEmail,
CountryId=@CountryId,
State=@State,
Zipcode=@Zipcode,
Status=@Status
WHERE Id = @Id
UPDATE EMPLOYEE
SET FirmNo=@FirmNo
WHERE FirmNo=@firm
IF @@ERROR <> 0
BEGIN
-- Returns 0 to the calling program to indicate failure.
ROLLBACK TRAN UpdateCPA
SET @RESULT = 0
END
ELSE
BEGIN
-- Returns 1 to the calling program to indicate success.
print'1'
COMMIT TRAN UpdateCPA
SET @RESULT = 1
END
end
ELSE
BEGIN
-- Returns 1 to the calling program to indicate success.
print'4'
--COMMIT TRAN UpdateCPA
SET @RESULT = 4
END
end
end
else
begin
IF NOT EXISTS(SELECT * FROM CPA WHERE PrimaryEmail=@SecondaryEmail or SecondaryEmail=@SecondaryEmail)
BEGIN
if(@firm=@FirmNo)
begin
BEGIN TRANSACTION UpdateCPA
UPDATE CPA
SET SupervisorId=@SupervisorId,
BookmarkerId=@BookmarkerId,
PreparerId=@PreparerId,
FirmNo=@FirmNo,
FirmName=@FirmName,
FirstName=@FirstName,
MiddleName=@MiddleName,
LastName=@LastName,
TaxYear=@TaxYear,
TaxSoftware=@TaxSoftware,
HomePhone=@HomePhone,
WorkPhone=@WorkPhone,
Fax=@Fax,
PrimaryEmail=@PrimaryEmail,
SecondaryEmail=@SecondaryEmail,
CountryId=@CountryId,
State=@State,
Zipcode=@Zipcode,
Status=@Status
WHERE Id = @Id
UPDATE EMPLOYEE
SET FirmNo=@FirmNo
WHERE FirmNo=@firm
IF @@ERROR <> 0
BEGIN
-- Returns 0 to the calling program to indicate failure.
ROLLBACK TRAN UpdateCPA
SET @RESULT = 0
END
ELSE
BEGIN
-- Returns 1 to the calling program to indicate success.
print'1'
COMMIT TRAN UpdateCPA
SET @RESULT = 1
END
END
else
begin
IF NOT EXISTS(SELECT * FROM CPA WHERE FirmNo=@FirmNo)
BEGIN
BEGIN TRANSACTION UpdateCPA
UPDATE CPA
SET SupervisorId=@SupervisorId,
BookmarkerId=@BookmarkerId,
PreparerId=@PreparerId,
FirmNo=@FirmNo,
FirmName=@FirmName,
FirstName=@FirstName,
MiddleName=@MiddleName,
LastName=@LastName,
TaxYear=@TaxYear,
TaxSoftware=@TaxSoftware,
HomePhone=@HomePhone,
WorkPhone=@WorkPhone,
Fax=@Fax,
PrimaryEmail=@PrimaryEmail,
SecondaryEmail=@SecondaryEmail,
CountryId=@CountryId,
State=@State,
Zipcode=@Zipcode,
Status=@Status
WHERE Id = @Id
UPDATE EMPLOYEE
SET FirmNo=@FirmNo
WHERE FirmNo=@firm
IF @@ERROR <> 0
BEGIN
-- Returns 0 to the calling program to indicate failure.
ROLLBACK TRAN UpdateCPA
SET @RESULT = 0
END
ELSE
BEGIN
-- Returns 1 to the calling program to indicate success.
print'1'
COMMIT TRAN UpdateCPA
SET @RESULT = 1
END
end
ELSE
BEGIN
-- Returns 1 to the calling program to indicate success.
print'44'
--COMMIT TRAN UpdateCPA
SET @RESULT = 4
END
end
/*
--select * from o_login
Begin transaction InsCPA
UPDATE CPA
SET SupervisorId=@SupervisorId,
BookmarkerId=@BookmarkerId,
PreparerId=@PreparerId,
FirmNo=@FirmNo,
FirmName=@FirmName,
FirstName=@FirstName,
MiddleName=@MiddleName,
LastName=@LastName,
TaxYear=@TaxYear,
TaxSoftware=@TaxSoftware,
HomePhone=@HomePhone,
WorkPhone=@WorkPhone,
Fax=@Fax,
PrimaryEmail=@PrimaryEmail,
SecondaryEmail=@SecondaryEmail,
CountryId=@CountryId,
State=@State,
Zipcode=@Zipcode,
Status=@Status
WHERE Id = @Id
--Error handling
IF @@ERROR <> 0
BEGIN
-- Returns 0 to the calling program to indicate failure.
ROLLBACK TRAN InsCPA
SET @RESULT = 0
END
ELSE
BEGIN
--DECLARE @ID1 INTEGER
-- Returns 1 to the calling program to indicate success.
print'11'
COMMIT TRAN InsCPA
SET @RESULT = 1
END*/
END
ELSE
BEGIN
print 'sec same'
-- Return 2 to the calling program to indicate record already exists.
set @RESULT = 3
END
end
end
else
begin
IF NOT EXISTS(SELECT * FROM CPA WHERE PrimaryEmail=@PrimaryEmail or SecondaryEmail=@PrimaryEmail)
BEGIN
/*--select * from o_login
Begin transaction InsCPA
UPDATE CPA
SET SupervisorId=@SupervisorId,
BookmarkerId=@BookmarkerId,
PreparerId=@PreparerId,
FirmNo=@FirmNo,
FirmName=@FirmName,
FirstName=@FirstName,
MiddleName=@MiddleName,
LastName=@LastName,
TaxYear=@TaxYear,
TaxSoftware=@TaxSoftware,
HomePhone=@HomePhone,
WorkPhone=@WorkPhone,
Fax=@Fax,
PrimaryEmail=@PrimaryEmail,
SecondaryEmail=@SecondaryEmail,
CountryId=@CountryId,
State=@State,
Zipcode=@Zipcode,
Status=@Status
WHERE Id = @Id
--Error handling
IF @@ERROR <> 0
BEGIN
-- Returns 0 to the calling program to indicate failure.
ROLLBACK TRAN InsCPA
SET @RESULT = 0
END
ELSE
BEGIN
--DECLARE @ID1 INTEGER
-- Returns 1 to the calling program to indicate success.
print'111'
COMMIT TRAN InsCPA
SET @RESULT = 1
END*/
if(@firm=@FirmNo)
begin
BEGIN TRANSACTION UpdateCPA
UPDATE CPA
SET SupervisorId=@SupervisorId,
BookmarkerId=@BookmarkerId,
PreparerId=@PreparerId,
FirmNo=@FirmNo,
FirmName=@FirmName,
FirstName=@FirstName,
MiddleName=@MiddleName,
LastName=@LastName,
TaxYear=@TaxYear,
TaxSoftware=@TaxSoftware,
HomePhone=@HomePhone,
WorkPhone=@WorkPhone,
Fax=@Fax,
PrimaryEmail=@PrimaryEmail,
SecondaryEmail=@SecondaryEmail,
CountryId=@CountryId,
State=@State,
Zipcode=@Zipcode,
Status=@Status
WHERE Id = @Id
UPDATE EMPLOYEE
SET FirmNo=@FirmNo
WHERE FirmNo=@firm
IF @@ERROR <> 0
BEGIN
-- Returns 0 to the calling program to indicate failure.
ROLLBACK TRAN UpdateCPA
SET @RESULT = 0
END
ELSE
BEGIN
-- Returns 1 to the calling program to indicate success.
print'1'
COMMIT TRAN UpdateCPA
SET @RESULT = 1
END
END
else
begin
IF NOT EXISTS(SELECT * FROM CPA WHERE FirmNo=@FirmNo)
BEGIN
BEGIN TRANSACTION UpdateCPA
UPDATE CPA
SET SupervisorId=@SupervisorId,
BookmarkerId=@BookmarkerId,
PreparerId=@PreparerId,
FirmNo=@FirmNo,
FirmName=@FirmName,
FirstName=@FirstName,
MiddleName=@MiddleName,
LastName=@LastName,
TaxYear=@TaxYear,
TaxSoftware=@TaxSoftware,
HomePhone=@HomePhone,
WorkPhone=@WorkPhone,
Fax=@Fax,
PrimaryEmail=@PrimaryEmail,
SecondaryEmail=@SecondaryEmail,
CountryId=@CountryId,
State=@State,
Zipcode=@Zipcode,
Status=@Status
WHERE Id = @Id
UPDATE EMPLOYEE
SET FirmNo=@FirmNo
WHERE FirmNo=@firm
IF @@ERROR <> 0
BEGIN
-- Returns 0 to the calling program to indicate failure.
ROLLBACK TRAN UpdateCPA
SET @RESULT = 0
END
ELSE
BEGIN
-- Returns 1 to the calling program to indicate success.
print'1'
COMMIT TRAN UpdateCPA
SET @RESULT = 1
END
end
ELSE
BEGIN
-- Returns 1 to the calling program to indicate success.
print'2'
--COMMIT TRAN UpdateCPA
SET @RESULT = 2
END
end
END
ELSE
BEGIN
print 'prim same'
-- Return 2 to the calling program to indicate record already exists.
set @RESULT = 2
END
end
end
Above procedure has many if else conditions
Is there any way to write
procs other than this process
Malathi Rao
Hi folks, basically I'm looking for this sort of structure
WHERE (caseA AND caseB) OR (caseC AND caseD) OR (CaseA AND caseD)
but I can't seem to be able to group the AND conditions together any time I try put brackets in SQL Server Enterprise manager removes them on me,
any help would be great,
thanks
1. Are stored procedures WITH ENCRYPTION slower than the ones withoutencryption?2. Should i put most restrictive conditions first or last in WHERE? Inwhich order does MSSQL execute conditions? Or MSSQL determents whatwould be best and does not bother with the way i sorted conditions?for example:SELECT *FROM [users]WHERE[user_id] = 1 AND[baned] = 0Is "[user_id] = 1" or "[baned] = 0" going to be executed first?
View 2 Replies View RelatedI am trying to do a summary SQL query. I have 3 fields. If one filed isnull and the other is not null, I want to count how many records thereare. I also want to count the opposite way then count both fields ifthey are both not null. Can I do this within the same query? Helpappreciated.Thanks,Steve*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 2 Replies View RelatedI am trying to do a select with the closest match.
Code Snippet
CREATE TABLE [#Person]
(
[PersonId] tinyint IDENTITY(1,1) NOT NULL
,[Height] char(2) NOT NULL
,[Weight] char(3) NOT NULL
,[Age] varchar(3) NOT NULL
,[HairColor] varchar(7) NOT NULL
,[EyeColor] varchar(7) NOT NULL
);
INSERT INTO [#Person] ([Height],[Weight],[Age],[HairColor],[EyeColor])
VALUES ('71', '150', '23', 'Brown', 'Blue');
INSERT INTO [#Person] ([Height],[Weight],[Age],[HairColor],[EyeColor])
VALUES ('70', '190', '22', 'Blonde', 'Brown');
INSERT INTO [#Person] ([Height],[Weight],[Age],[HairColor],[EyeColor])
VALUES ('69', '140', '20', 'Black', 'Brown');
INSERT INTO [#Person] ([Height],[Weight],[Age],[HairColor],[EyeColor])
VALUES ('65', '150', '21', 'Brown', 'Green');
SELECT * FROM [#Person]
WHERE
([Height] > '66' AND [Height] < '72')
AND ([Weight] > '150' OR [Weight] < '180')
AND ([Age] > '20' OR [Age] < '25')
AND ([HairColor] IN ('Brown', 'Blonde', 'Black'))
AND ([EyeColor] IN ('Blue', 'Brown', 'Green'));
DROP TABLE [#Person];
This simple example works great. But what if I wanted everybody who met 4 of the 5 conditions? I tried to think of a counting solutions, and then order by the count but I could quite get there. Any help would be greatly appreciated. My live data is actual sales records with 20 some odd record types. I am hoping any solutions I find will scale well.
Hi All,
I'm very new to Integration Services. Self Learned this ETL tool based on my prior ETL tool knowledge.
Can you tell me how do write IF Then Else conditions for every column in my source and redirect to a single output?
Hey correction here ... i'm using flat file as my source
Thanks in Advance,
Suresh N
Hi,I have some SQL statements like that SELECT ID, getData(ID) as Alias
FROM table
WHERE Alias = value
GO
SELECT ID, count(something) as amount
FROM table
GROUP BY amount Why does the alias not work?? In "order by" clause it does
Hi All,
This is my problem. I need the out put of a sql select statement to be "true" or "false" depending on the actual columns value is positive or negative. Does any one how to do this.
Thanks in advance,
-VJ
I can't figure this out for the life of me. Wanted to know if it's possible to select certain date conditions in a query, then later reference those conditions and to only select the max of them.
I need to do this dynamically as I do not know what the max value is. I've provided an example below:
Select var1
From table1
where
(
(Date1 = '11/30/2005')
OR
(Date1 = '12/31/2005')
)
and Date1 = (Max of previously selected values e.g. '12/31/2005')
What I can't figure out is how to dynamically retrieve the max of 11/31/2005 and 12/31/2005. Any ideas are greatly appreciated.
i want to add a column to a table with conditions below :
1- it has a default value=0
2- this column can get null value
3- no constraint should be created
is it possible ?
what is order in which conditions are processed for sql query i.e for
select * from table1, table2 where cond1 and cond2 and cond3 which condition will be processed first (i.e. for optimination purpose condition cutting down max no. of row shud be placed first or last?)
I have an issue accumulating a value based on certain conditions:
I need to sum up the days column as you can see table below. The sum is based on the StartNewFlag.
When the flag is 1, I need to start a new sum from zero, else I need to accumulate to the previous rows.
CREATE TABLE #foo
(
ItemID int,
StartDate datetime,
EndDate datetime,
StartNewFlag bit,
[Code] ....
My Results must look like one of the following tables (either one would work, however the second one is preferred)
Result 1:
ItemID StartDate EndDate StartNewFlag Days TotalDays
1 2015-07-01 00:00:00.000 2015-07-05 00:00:00.000 1 4 5
1 2015-07-08 00:00:00.000 2015-07-09 00:00:00.000 0 1 5
1 2015-07-11 00:00:00.000 2015-07-15 00:00:00.000 1 4 11
1 2015-07-18 00:00:00.000 2015-07-21 00:00:00.000 0 3 11
1 2015-07-22 00:00:00.000 2015-07-26 00:00:00.000 0 4 11
OR
Result 2:
ItemID EndDate TotalDays
1 2015-07-09 00:00:00.000 5
1 2015-07-26 00:00:00.000 11
I have a table where when an employee works LEAVE1 and LEAVE2 paycodes on the same day then in the new column called 'FLAG' we need to put a 1 for LEAVE1 and a 2 for LEAVE2, when these paycodes are not there on the same day then flag will be NULL as for other paycodes.
Tried using the CASE statements but it always puts a 1 or 2 for the respective paycodes regardless of the fact whether they were together on the same day or not.
WITH SampleData (PERSON,TRANSACTDATE, STARTDATE, END_DATE, IN_PUNCH,OUT_PUNCH,HOURS, PAYCODE) AS
(
SELECT 1234,'08/03/2015','08/03/2015','08/03/2015', '06:00','09:00','3', 'REG1' UNION ALL
SELECT 1234,'08/03/2015','08/03/2015','08/03/2015', '09:00','13:00','4','REG2' UNION ALL
SELECT 1234,'08/04/2015','08/04/2015','08/04/2015', '09:00','13:00','4','LEAVE1' UNION ALL
SELECT 1234,'08/04/2015','08/04/2015','08/04/2015', '14:00','16:00','2', 'LEAVE2'UNION ALL
SELECT 1234,'08/05/2015','08/05/2015','08/05/2015', '08:00','09:00','1', 'LEAVE1'UNION ALL
SELECT 4553,'08/05/2015','08/05/2015','08/05/2015', '08:00','09:00','1', 'REG1'UNION ALL
SELECT 4553,'08/05/2015','08/05/2015','08/05/2015', '10:00','12:00','2','LEAVE2'
)
[code].....
Current Results
PersonTransactDate STARTDATEEND_DATEIN_PUNCH OUT_PUNCH HOURS PAYCODE
123408/03/2015 08/03/201508/03/201506:00 13:00 3 REG1
123408/03/2015 08/03/201508/03/201506:00 13:00 4 REG2
123408/04/2015 08/04/201508/04/201509:00 16:00 4 LEAVE1
123408/04/2015 08/04/201508/04/201509:00 16:00 2 LEAVE2
123408/05/2015 08/05/201508/05/201508:00 09:00 1 LEAVE1
455308/05/2015 08/05/201508/05/201508:00 12:00 2 LEAVE2
455308/05/2015 08/05/201508/05/201508:00 12:00 1 REG1
Desired Results
PersonTransactDate STARTDATEEND_DATEIN_PUNCH OUT_PUNCH HOURS PAYCODE FLAG
123408/03/2015 08/03/201508/03/201506:00 13:00 3 REG1 NULL
123408/03/2015 08/03/201508/03/201506:00 13:00 4 REG2 NULL
123408/04/2015 08/04/201508/04/201509:00 16:00 4 LEAVE1 1
123408/04/2015 08/04/201508/04/201509:00 16:00 2 LEAVE2 2
123408/05/2015 08/05/201508/05/201508:00 09:00 1 LEAVE1 NULL
455308/05/2015 08/05/201508/05/201508:00 12:00 2 LEAVE2 NULL
455308/05/2015 08/05/201508/05/201508:00 12:00 1 REG1 NULL
I have three table For example
Employee (Empid , Empname , Esal)
Department (Deptid , Deptname , empid )
Staff (staffid , Staffname , Empid)
It is just example
how can i update Empname whose staffid =1 accor to staffid)
using Join Conditions :- Pls help me out ..
or
how to update data using JOIN Conditions
Yaman
Meed to complete this procedure. It fails in the WHEN condition
ALTER PROCEDURE [dbo].[sp_TranpostSupport_Xuat_Nhap_ToTal]
@NO_ AS NVARCHAR(4000),
@FromDate DATETIME,
@ToDate DATETIME,
@TransInvoiceID INT
AS
SELECT x.NO_,x.NAMES,x.ZIPCODE,x.FromDate,x.ToDate,x.Total450c, n.Total450k,
[Code] ....
I have a table having code
code
12345678
21345678
45789612
12345678
21345678
21345678
12347586
I want result on the basis of first 2 digit the repeatation of code is count as 1.
code1 code2 count
12 34 2
21 34 1
45 78 1
I have a Vehicle/Driver Inspection Database and I'm trying to create a Traffic Violation Point System, its a system when drivers commit certain traffic offences they will incur driving-offence points.
System: The points for violations that all occurred within the last 12 months of ONE ANOTHER are added together to calculate point total. If the accumulated points is reached 14 points driver is suspended the points will be REMOVED or minus 14 points after the suspension has been served.
Example:
Date of Offence - Number of Points
Aug. 6, 2013 - 6
Feb. 4, 2014 - 4
Apr. 25, 2014 - 4
- 2
May 8, 2014 - 2
Explanation:
On April 25, 2014 two offences incurred and from (Aug 6, 2013 - Apr. 25 2014) 14 points have accumulated (6 + 4 + 4) and suspension is carried out then 14 points is removed. The 2nd offence on Apr. 25, 2014 will be carried forward and added to May 8, 2014 points (total 4 points).
Below are DB Tables:
tbl_Driver
DriverID DriverLicense FirstName LastName
tbl_Event
EventID EventTIme DriverID CarID
tbl_EventViolation
EventViolatinID EventID ViolationID Status (1 = no, 2 = yes radio buttons)
tbl_Violation
ViolationID ViolationName Points
tbl_ViolationClass
ViolationClassID ClassName
I made an SQL Code but to sum the accumulated points only but not the whole condition. See below:
SELECTa.DriverId,
a.DriverLicense,
a.FirstName + ' ' + a.LastName as DriverName,
a.FirstName,
a.LastName,
a.DriverMobileNo1,
[Code] .....
I have a Columns like
RegionAmount
Asia5600
Asia6500
Asia1000
US8900
US4400
US6700
Europe4500
Europe2400
Europe1600
Africa6200
Africa6400
Africa6900
i want to execute a query with conditions...like
if Region==Asia then compute percent of Amount
if Region==US then compute percent of Amount
if Region==Europe then compute percent of Amount
if Region==Africa then compute percent of Amount
the result set to be displayed something like
Column---Amount---PercentAmount
thanks a lot!
pavan
Hello,
I would like some assistance with some code that I am attempting to write. I have one column (Mgr1FullName) that contains different values. I want it to show me all the people who has a manager name as Unavailable, Null, or blank.
Example Code:
--------------------------------------------------------------------
select uuid_hdr.id,
uuid_hdr.bizrightid,
uuid_hdr.fullname,
uuid_hdr.mgr1fullname,
uuid_dtl.role,
uuid_dtl.application,
uuid_dtl.dateremoved,
uuid_dtl.userid
from uuid_dtl
inner join uuid_hdr
on uuid_dtl.hdr_id = uuid_hdr.id
where uuid_dtl.dateremoved is Null and
uuid_dtl.application = 'SAPRET'and
uuid_hdr.mgr1fullname = 'Unavailable'or
uuid_hdr.mgr1fullname is Null or
uuid_hdr.mgr1fullname = ' ' and
uuid_dtl.userid not like 'prodsup%' and
uuid_hdr.bizrightid not like 'prodsup%' and
uuid_dtl.role not like 'z:m_genuser_vendor'
-------------------------------------------------------------------
Should I use ORs or ANDs? I will face this same problem with the ROLE column.
Thanks for all and any help.
Twyn
Hi All,
I have my table structure as Follows
S.NO INT
S.NAME VARCHAR(50)
now i want to update values where S.NO=10.
How is this possible to writ query.
As per my knowledge sql won't allow dot as in column name in where condition.
Can any one please advice on this.
This is Priority one.
Thanks in advance.
I have a table that has records layed out as so:Table:fd_Id INT IDENTITY (1, 1)fd_User VARCHAR(30)fd_Effective DATETIMEData could be as follows:1 | "user1" | 6/20/20012 | "user2" | 6/1/20023 | "user2" | 6/5/20024 | "user2" | 6/5/20025 | "user2" | 2/1/20026 | "user3" | 9/1/20037 | "user3" | 10/2/20028 | "user4" | 1/1/2005What I need to retrieve from that table is the SINGLE LATEST item ofeach fd_User.Results:1 | "user1" | 6/20/20013 | "user2" | 6/5/2002 (or 4 | "user2" | 6/5/2002) since the dates arethe same but only 1 of them6 | "user3" | 9/1/20038 | "user4" | 1/1/2005
View 3 Replies View RelatedHi All,Just wondering if anyone can tell me if you can test for multipleconditions as part of an "IF" statement in T-SQL in SQL Server 2000?ie something like:IF @merr = 1 or @merr=2BeginSELECT statementUPDATE statementEndAny help much appreciated!Much warmth,M.
View 1 Replies View Related