Conert Char To Datetime
Apr 11, 2004
Hello,
I have made a slight error in my SQL2000 database and have found this out with 10000 plus records under my belt.
I have a field called Char with entries 12mid and 12noon. I need to convert these to Datetime. All records convert OK except these two.
I am using DTS to transfer records form old table to new table. How do I write a procedure (or something) to enable conversion of the records 12mid and 12noon to 12am and 12pm.
Thanks
Goong
View 3 Replies
ADVERTISEMENT
Jul 20, 2005
Hi,I have a text file that contains a date column. The text file will beimported to database in SQL 2000 server. After to be imported, I wantto convert the date column to date type.For ex. the text file look likeName dateSmith 20003112Jennifer 19991506It would be converted date column to ydm database in SQL 2000 server.In the table it should look like thisName DateSmith 2000.31.12Jennifer 1999.15.06Thanks in advance- Loi -
View 1 Replies
View Related
Mar 28, 2004
Hi,
I have DB2 date value 00000000. If I'm exporting to SQL server using openquery that is automaticaly converting to char of 8 and stored as the same value 00000000.
My question is how I can convert them as datetime value in SQL server 2000.?
View 1 Replies
View Related
Sep 14, 1998
Everytime I run a simple convert statement, from char to datetime, it works but when I use the `Select Convert(datetime, BeginDate)` in an insert statement it complains with a syntax error on the conversion from char to datetime. E.g.
Insert Into AlaskaData2( CurrIssueDate, InactivationDate)
select Convert (Datetime, CurrIssueDate) CurrIssueDate,
Convert(Datetime, InactivationDate) InactivationDate
from Alaskadata1
go
View 1 Replies
View Related
Jul 3, 2001
Have a requirement to:
Convert char(7) YYYY-MM variable (eg. '2001-07') to both:
datetime '2001-07-01 00:00:00.000' and
datetime '2001-07-01 23:59:59.997'
thx in advance!
View 2 Replies
View Related
Feb 6, 2007
Hi all,
I need to convert a char (a) to datetime in the following query:
select *
from table1
where convert (a, datetime) > '01/31/2007'
this query does not work :(
View 1 Replies
View Related
Jul 23, 2005
Hi all,Would anyone know a way to convert a char(10) in format 'm/d/yyyy' to'mm/dd/yyyy', so I can convert the column to datetime format.Thanks
View 1 Replies
View Related
Nov 23, 2006
i have another problem.and it's now on converting a char(4) to datetimehere is the situationJ_TIM < F_TIMJ_TIM is datetime while F_TIM is char of 4exampleJ_TIM = 20:30F_TIM = 2030how can i convert F_TIM to datetime so that i can compare them.???thanks
View 3 Replies
View Related
Nov 15, 2006
I have a Database which is having a Counterdate time Column stored in the form of Char(24)
But i need it to be in form of datetime so that i can use the datetime functions on it..When i use the cast or convert inside the function where i am passing this character it gives me error
"Conversion failed when converting datetime from character string."
I am done all permutatiions and combinations for this used
Set @DE = convert ( datetime, @ts,121)
Set @de = cast( @ts as datetime)
BUT ALWZ give me same error.... also when i copy the whole of the data table into some other database the error doesnt come.. i converts the character into the datetime..
I DONT understand why the Server is behaving wiered..
Hoping to get an answer soon.
With regards
Sharad
Database Developer ,
UIC
View 4 Replies
View Related
May 1, 2005
I accidently put char instead of datetime in the Sql Server DateCreated
dataType. Is there any way that now I can change. I guess even if I
change I cannot get the time and date in a format that I want since
they are in Char datatype.
View 2 Replies
View Related
Jan 24, 2002
Hello everyone, I have searched and seached for an answer to something that I know has to be simple but have been unsuccessful. I appreciate any help...
I am trying to take a char (6) column named col001 and convert it to datetime.
The column is in mmddyy format. I am using SQL 2000, but have available sql 7.0 servers if there is a difference. I expect that I have to write a cursor but have been unable to get the correct syntax. Thanks everyone
View 1 Replies
View Related
Feb 14, 2006
on a column DateNew = DateTimei am trying :INSERT INTO [dbo].[Users] (DateNew) VALUES ('2003/01/31 10:04:14')and i get an error :conversion of char data type to datetime data type resulted in an out of range datetime valueI had never this error before , do you know why ?i must enter a yyyy/mm/dd format because this database will be used for Fr and Us langagesthank you for helping
View 14 Replies
View Related
Jan 22, 2007
hello all, I am having a problem calculating the difference, in days, between two dates, STARTDATE and ENDDATE. The data is stored in the database as char(8), formatted YYYYMMDD. "Null" values are stored as '00000000'. When I try to use DATEDIFF an exception is thrown: "the conversion of a char data type to a datetime data type resulted in an out-of-range datetime value" How can I fix this, and a get a result even if STARTDATE or ENDDATE is '00000000'? Changing the format of the stored data is not an option. Thanks for any assistance. Mike CREATE TABLE dbo.DATETIME1 (ID1 int,STARTDATE char(8),ENDDATE char(8))INSERT into DATETIME1 (ID1, STARTDATE, ENDDATE)VALUES (1, '20070105', '20070108')INSERT into DATETIME1 (ID1, STARTDATE, ENDDATE)VALUES (2, '20070105', '00000000')Select * from DATETIME1Select DATEDIFF(d, STARTDATE, Convert(datetime,ENDDATE) ) as Difference from DATETIME1 WHERE ID1 = 1
View 5 Replies
View Related
Jul 20, 2005
I am trying to run the following query:ALTER TABLE dnb_profileALTER COLUMN [family update date] datetimeand I keep getting the following error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.The statement has been terminated.Can anyone tell me how I can do this successfully??Thanks,Connie SawyerFoley & LardnerJoin Bytes!
View 2 Replies
View Related
Dec 17, 2007
I'm trying to convert a char(24) column to the datetime format. This is my query:
select CONVERT(datetime, [Date], 121) from Table
The date in the char(24) column has this format: 2007-12-14 14:45:31.735
When executing this statemant it says it cannot convert this char to datetime. But when I execute this statement, it works:
select CONVERT(datetime, '2007-12-14 14:45:31.735', 121) from Table
What am I doing wrong?
View 7 Replies
View Related
Mar 2, 2007
Thanks in adance
Platform: SQL 2000
A SQL table has a field named "pay-day" with Char(8) data type.
I tried to change its data type to datetime but only with an error message like this. I did right-click the table and tried to modify a data type.
- Unable to modify table.
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
The statement has been terminated.
Jay
View 4 Replies
View Related
Jan 28, 2008
update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?
View 5 Replies
View Related
May 3, 2008
Hi, i have a datagrid and and a gridview that connects to access database the connection code is like this:
(Grid View) <asp:AccessDataSource ID="Bookses" runat="server" DataFile="App_Data/BooksDB.mdb"
SelectCommand="Select BookID, BookTitle From BooksDB Order By ID">
</asp:AccessDataSource>
(Data Grid)<asp:AccessDataSource ID="BookSource" runat="server" DataFile="App_Data/BooksDB.mdb"
SelectCommand="SELECT * FROM BooksDB Order By ID"></asp:AccessDataSource>
so i want to change it to sql server connection for more functionality interface. I also convert the Access db into Sql database.
please reply to me
thank you
saquib qureshi
www.saquibs.com
View 1 Replies
View Related
Oct 23, 2007
Can you compare chars stored as ccyymmdd correctly?
Field1>=field2
I was thinking you needed to cast this information as a datetime value before you could do it.
Thanks
View 6 Replies
View Related
Dec 14, 2005
After testing out the application i write on the local pc. I deploy it to the webserver to test it out. I get this error.
System.Data.SqlClient.SqlException: The conversion of a char data type to a
datetime data type resulted in an out-of-range datetime value.
Notes: all pages that have this error either has a repeater or datagrid which load data when page loading.
At first I thought the problem is with the date, but then I can see
that some other pages that has datagrid ( that has a date field) work
just fine.
anyone having this problem before?? hopefully you guys can help.
Thanks,
View 4 Replies
View Related
Apr 19, 2008
Advance thanks ....... My table is TimeSheet:----------------------------------- CREATE TABLE [dbo].[TimeSheet]( [autoid] [int] IDENTITY(1,1) NOT NULL, [UserId] [int] NOT NULL, [starttime] [datetime] NOT NULL, [endtime] [datetime] NOT NULL, [summary] [nvarchar](50) NOT NULL, [description] [nvarchar](50) NULL, [dtOfEntry] [datetime] NOT NULL, [Cancelled] [bit] NULL) ON [PRIMARY] My Query is------------------ insert into timesheet (UserId, StartTime,EndTime, Summary, Description,DtOfEntry) values (2, '19/04/2008 2:05:06 PM', '19/04/2008 2:05:06 PM', '66', '6666','19/04/2008 2:05:06 PM')i m not able to insert value Error Message is-------------------------Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated. can any body give any solution
View 5 Replies
View Related
Aug 3, 2005
Hey, I have a big problem that i wanna search data from SQL by DateTime like thatselect * from test where recorddate='MyVariableWhichHoldDate'i use variable that holds Date info.i searched a lot infomation on net but there is no perfect solution. i know why this occur but there is no function to solve this problem. i used a lot of ways. it accept yyyy-mm-dd format but my variable format is dd-mm-yyyyy . is there any function for this problem? and any other solution.thanks for ur attentionregards
View 6 Replies
View Related
Sep 17, 2003
Database is SQL Server 2000
I have a field in a table that stores date of birth. The field's datatype is char(6) and looks like this: 091703 (mmddyy). I want to convert this value to a datetime datatype.
What is the syntax to convert char(6) to datetime?
Thank you in advance.
View 1 Replies
View Related
Jul 23, 2005
Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies
View Related
Jun 19, 2008
Hi,
alter PROCEDURE [dbo].[PPUpdateIWDetails]
(
@CompanyID NVARCHAR(36),
@DivisionID NVARCHAR(36),
@DepartmentID NVARCHAR(36),
@ItemID NVARCHAR(36),
@OrderNo NVARCHAR(36),
@LineNo NVARCHAR(36),
@TAllotedQty Numeric,
@EmployeeID NVARCHAR(36),
@Trndate datetime
)
AS
BEGIN
By default iam passing 12 char itemid as parameter...
Here iam selecting the itemid from InventoryLedger -if it is 8 char than this query should be executed
IF EXISTS(SELECT ItemID FROM InventoryLedger WHERE TransDate=@Trndate AND ItemID=@ItemID AND ILLineNumber =@LineNo AND TransNumber=@OrderNo AND TransactionType='Production' AND CompanyID=@CompanyID AND DivisionID= @DivisionID AND DepartmentID=@DepartmentID)
BEGIN
DECLARE @Qty INT
select @Qty =QUANTITY from inventoryledger WHERE TransDate=@Trndate AND ItemID=@ItemID AND ILLineNumber =@LineNo AND TransNumber=@OrderNo AND TransactionType='Production' AND CompanyID=@CompanyID AND DivisionID= @DivisionID AND DepartmentID=@DepartmentID
select qtyonhand=qtyonhand+@Qty from InventoryByWareHouse where ItemID=@ItemID
END
Here iam selecting the itemid from InventoryLedger -if it is 12 char than this query should be executed(both queries are same)
IF EXISTS(SELECT ItemID FROM InventoryLedger WHERE TransDate=@Trndate AND ItemID=@ItemID AND ILLineNumber =@LineNo AND TransNumber=@OrderNo AND TransactionType='Production' AND CompanyID=@CompanyID AND DivisionID= @DivisionID AND DepartmentID=@DepartmentID)
BEGIN
DECLARE @Qty INT
select @Qty =QUANTITY from inventoryledger WHERE TransDate=@Trndate AND ItemID=@ItemID AND ILLineNumber =@LineNo AND TransNumber=@OrderNo AND TransactionType='Production' AND CompanyID=@CompanyID AND DivisionID= @DivisionID AND DepartmentID=@DepartmentID
select qtyonhand=qtyonhand+@Qty from InventoryByWareHouse where ItemID=@ItemID
END
View 11 Replies
View Related
May 13, 2008
hello all .. I have a form that includes two textboxes (Date and Version) .. When I try to insert the record I get the following error message .. seems that something wrong with my coversion (Data type)"The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."
in my SQL database I have the date feild as datetime and the version as nvarchar(max)
this is the code in the vb page .. Can you please tell me how to solve this problem?Imports System.Data.SqlClient
Imports system.web.configuration
Partial Class Admin_emag_insert
Inherits System.Web.UI.Page
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Record_DateTextBox.Text = DateTime.Now
End Sub
Protected Sub clearButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles clearButton.Click
Me.VersionTextBox.Text = ""
End Sub
Protected Sub addButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles addButton.Click
Dim objConnection As SqlConnection
Dim objDataCommand As SqlCommand
Dim ConnectionString As String
Dim record_date As Date
Dim version As String
Dim emagSQL As String
'save form values in variables
record_date = Record_DateTextBox.Text
version = VersionTextBox.Text
ConnectionString = WebConfigurationManager.ConnectionStrings("HRDBConnectionString").ConnectionString
'Create and open the connection
objConnection = New SqlConnection(ConnectionString)
objConnection.Open()
emagSQL = "Insert into E_Magazine (Record_Date, Version ) " & _
"values('" & record_date & "','" & version & "')"
'Create and execute the command
objDataCommand = New SqlCommand(emagSQL, objConnection)
objDataCommand.ExecuteNonQuery()
objConnection.Close()
AddMessage.Text = "A new emagazine was added successfully"
Me.VersionTextBox.Text = ""
End Sub
End Class
View 10 Replies
View Related
Aug 21, 2007
I create two tables:
create table table1
(
col1 char(1)
)
go
create table table2
(
col2 char(2)
)
go
I add some records to two tables after createing operation completed.
Then i use dbcc page command to oversee the structures of data page in two tables.
I found some interest things:
The rows in two tabes take up same space:9 bytes
You can see the "9" on top of the data, for example:Slot 0, Offset 0x60, Length 9, DumpStyle BYTE
or calculate from the offset array
Any suggestions?
View 14 Replies
View Related
Jul 9, 2007
Hi,
I'm inserting a datetime values into sql server 2000 from c#
SQL server table details
Table nameate_test
columnname datatype
No int
date_t DateTime
C# coding
SqlConnection connectionToDatabase = new SqlConnection("Data Source=.\SQLEXPRESS;Initial Catalog=testdb;Integrated Security=SSPI");
connectionToDatabase.Open();
DataTable dt1 = new DataTable();
dt1.Columns.Add("no",typeof(System.Int16));
dt1.Columns.Add("date_t", typeof(System.DateTime));
DataRow dr = dt1.NewRow();
dr["no"] = 1;
dr["date_t"] = DateTime.Now;
dt1.Rows.Add(dr);
for(int i=0;i<dt1.Rows.Count;i++)
{
string str=dt1.Rows["no"].ToString();
DateTime dt=(DateTime)dt1.Rows["date_t"];
string insertQuery = "insert into date_test values(" + str + ",'" + dt + "')";
SqlCommand cmd = new SqlCommand(insertQuery, connectionToDatabase);
cmd.ExecuteNonQuery();
MessageBox.Show("saved");
}
When I run the above code, data is inserted into the table
The value in the date_t column is 2007-07-09 22:10:11 000.The milliseconds value is always 000 only.I need the millisecond values also in date_t column.
Is there any conversion needed for millisecond values?
thanks,
Mani
View 3 Replies
View Related
Dec 6, 2006
I'm getting error:
String was not recognized as a valid DateTime.
my insert parameter:
<asp:Parameter Name="LastModified" Type="DateTime" DefaultValue= "<%=DateTime.Now.ToString() %>"
my insert command:
InsertCommand="INSERT INTO [Product] ([Enabled], [ProductCode], [ProductName], [ProductAlias], [CarrierId], [DfltPlanId], [DoubleRating], [DoubleRateProductId], [ConnCharges], [StartDate], [EndDate], [Contracted], [BaseProductId], [LastModified], [LastUser]) VALUES (@Enabled, @ProductCode, @ProductName, @ProductAlias, @CarrierId, @DfltPlanId, @DoubleRating, @DoubleRateProductId, @ConnCharges, @StartDate, @EndDate, @Contracted, @BaseProductId, @LastModified, @LastUser)"
LastModified is a datetime field.
Running sql2005
View 1 Replies
View Related
Mar 14, 2007
Hi all, having a little problem with saving dates to sql databaseI've got the CreatedOn field in the table set to datetime type, but every time i try and run it i get an error kicked up Error "The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."I've tried researching it but not been able to find something similar. Heres the code: DateTime createOn = DateTime.Now;string sSQLStatement = "INSERT INTO Index (Name, Description, Creator,CreatedOn) values ('" + name + "','" + description + "','" + userName + "','" + createOn + "')"; Any help would be much appreciated
View 4 Replies
View Related
Mar 17, 2007
Hey :)I'm facing a lot of troubles trying to create a new pause/break-system. Right now i'm building up the query that counts how many records that is inside 2 fields. Let me first show you my table:
ID (int) | stamp_start (Type: DateTime) | stamp_end (Type: DateTime) | Username (varchar)0 | 17-03-07 12:00:00 | 17-03-07 12:30:00 | Hovgaard
The client will enter a start time and a end time and this query should then count how many records that are inside this periode of time.
Example: The client enter starttime: 12:05 and endtime: 12:35.The query shall then return 1 record found. The same thing if the user enters 12:20 and 12:50.My current query looks like this:SELECT COUNT(ID) AS Expr1 FROM table WHERE (start_stamp <= @pausetime_start) AND (end_stamp >= @pausetime_end)But this will only count if I enter the exact same times as the one inside the table.Any ideas how I can figure this out?Thanks for your time so far :)/Jonas Hovgaard - Denmark
View 2 Replies
View Related
May 13, 2006
Hi,
I have a column of type datetime in sqlserver 2000. Whenever I try to insert the date
'31/08/2006 23:28:59'
I get the error "...datetime data type resulted in an out-of-range datetime value"
I've looked everywhere and I can't solve the problem. Please note, I first got this error from an asp.net page and in order to ensure that it wasn't some problem with culture settings I decided to run the query straight in Sql Query Anaylser. The results were the same. What else could it be?
cheers,
Ernest
View 2 Replies
View Related
Mar 11, 2014
I am inserting date and time data into a SQL Server 2012 Express table from an application. The application is providing the date and time as a string data type. Is there a TSQL way to convert the date and time string to an SQL datetime date type? I want to do the conversion, because SQL displays an error due to the
My date and time string from the application looks like : 3/11/2014 12:57:57 PM
View 1 Replies
View Related
