I was trying to configure my package. I have a Oracle 10g DB as source. I used "Oracle provider for OLE Db" as provider in connection manager. I entered user name and password.
When I set my package protection level to : DontSaveSensitive and executed the package
it gives me this error:
[Connection manager "WDEV.wuser1"] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "ORA-01005: null password given; logon denied".
When i go back to connection manager I see the blank password. I retype it but again when I execute I get the above error.
I configured the package with same setting and in the config file I mentioned the passwords and all details but again I when I execute the package i get the below error:
[Connection manager "WDEV.wuser1"] Error: An OLE DB error has occurred. Error code: 0x80040E21. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Since it was not storing password OR not executing without password I set the Protection Level to : "EncryptAllWithPassword"
and excute it I works Great. and runs Awesome. Except I get this Warning
[OLE DB Source [1]] Warning: Cannot retrieve the column code page info from the OLE DB provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used.
Question 1: "CAN I IGNORE THIS WARNING?'
Question2: "THE PACKAGE RUNS GOOD WHEN I SET THE PROTECTIONLEVEL =EncryptAllWithPassword. With this settings when i configure my package it gives me error. Why is it so Any Help please Below plz find the config file?"
[OLE DB Source [1]] Error: The AcquireConnection method call to the connection manager "WDEV.wuser1" failed with error code 0xC0202009.
[Connection manager "WDEV.wuser1"] Error: An OLE DB error has occurred. Error code: 0x80040E21. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
1. Err: Test connection failed because of an error in initializing provider. Oracle Client and networking components were not found Sol: I installeed the Oracle Client tools
2. Err: ORA -12154: TNS: Could not resolve teh connect identifier specified Sol: Then I point out the TNS file
3. Now I coonect the Oracle db . I go to Connection Manager . Specifies the provide as: Native OLE DB Oracle Provide for OLE DB, Select my DB, provide teh user name and password. and check if the connection passed. Then in my data Flow Task when I add this source and check the Colmns its gives me an error./ sort of warning
The component reported the following warnings:
Warning at {C947B.......} [Ole DB Source[1]]: Cannot retrieve the column code page info from the OLE DB provider. if the components supports teh "DefaultCodePage" property, the code page from that property will be used.....
Will this warning has an significance. i dont see any error in my output data. but is there something I m doing wrong.
4. When I set my ProtectionLevel under Security in package property to "Dont Save Sensitive" in order to easily configure the package I m getting this error: failed Validation. The default one was EncryptSensitiveWithUserKey then its running smoothly. Can somebody advice me on this?
I addded the all the errors and solution for 1 and 2 becuase in that way this will be helpful in future.
I have several oracle reports which running in SharePoint Integrated mode. They were working well when the SharePoint server and report server in same machine. But after that the report server move out to another machine, we got the problem with connection to oracle databasen. Reports with Sql server as data source has no problem at all.
We have installa both oracle client and odp.net in both machines, and tried to give Network Service full access right in Bin catalog in oracle client but nothing helps. Please help!!!!!
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'Ellentst'. (rsErrorOpeningConnection)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
In log file:
Cannot create a connection to data source 'DatabasName'. ---> System.Exception: System.Data.OracleClient requires Oracle client software version 8.1.7 or greater.
We have installed oracle client version 10.2.0 in both machine.
Hi, I have my datasource in Oracle9i and destination is Sql2005. I am connecting to Oracle 9i through OLEDb provider and when I connect to my DataSource using OLE DB Data Source, I get the following error:
Warning at "guid code": Cannot retreive the column code page info from the oledb provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale Id will be used.
Could anyone please help me trouble shoot this problem.
Anybody find a sound approach to being able to store DataSource connection information in a configuration and be able to access a Data Source that requires a password for login?
I am trying to make an oracle publiching from sql server 2005 enterprise final release, i installed the oracle client 10.2 (10g) on the same server where sql server already installed, i made different connection to oracle database instance and it was ok.
from sql server : right click on publication -New oracle publication-Next-Add Oracle Publisher-Add button-Add Oracle Publisher-i entered server insttance test1 and their users and passwords--connect --->
the oracle publisher is displayed in the list of publisher but when press ok i got the following error :
An error occurred applying the changes to the Distributor.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=Microsoft.SqlServer.Management.UI.DistributorPropertiesErrorSR&EvtID=ErrorApplyingDistributor&LinkId=20476
SQL Server could not enable 'test1' as a Publisher. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The permissions associated with the administrator login for Oracle publisher 'test1' are not sufficient. Changed database context to 'master'. (Microsoft SQL Server, Error: 21684)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=21684&LinkId=20476
Currently, I am working SSIS project that its data source from ORACLE 9i. I installed full SSIS in server and also ORACLE. So, I have three connections available in server. They are the following below.
Oracle Client Microsoft OLE DB Provider for Oracle Oracle Provider for OLE DB
The problem is the three component can not recognize parameterization and ORACLE store procedures.
Finally, I executed the store procedures by ORACLE package from command prompt (bat files). So, the command execute from SSIS package.
I am having a nightmarish time getting an Oracle Connection Manager working as a source in my SSIS package.
The CM is called "OLTP_SOURCE". When I inspect the configuration and test connection, it succeeds, however when I go to run the package (both in debug mode and via DTEXECUI) I get the following error:
The AcquireConnection method call to the connection manager "OLTP_SOURCE" failed with error code 0xC0202009
After this happens, if I go into an OLE DB Source within a DFT, I get the following:
No disconnected record set is available for the specified SQL statement.
Now, if I go back into the CM, enter the password and test, it succeeds. From this point, I will go to preview the data in the OLE DB Source, and it comes back fine. However, when I go to run the package, I get the same error time and time again:
The AcquireConnection method call to the connection manager "OLTP_SOURCE" failed with error code 0xC0202009
The quick reader will suggest that the password is not being persisted. To this end, I have tried each of the following techniques to no avail:
1. Double, Triple and Quadruple check that the "save" password option in the CM is checked.
2. Hardcode the connection string in the dtsx XML-behind.
3. Enable Package Configurations and hardcode the connection string in the dstsconfig file.
4. Run the dtsx file using DTEXECUI, providing it with the configuration (that includes the hard-coded password).
5. Run the dtsx file using DTEXECUI, providing it the connection string in the Connection Managager override UI.
Can anyone help shed some light on what might be going on? So far, it is obvious that there has to be something that I am doing wrong because (syntax dialect differences aside) I can't imagine that Oracle sources should be this much of a headache.
We met a problem when we move on Oracle 10g from Oracle 9i in the loading process. The scenario is that SQL Server as Data Warehouse, SSIS as ETL tool. But the length of string column as data source table in SSIS grows up 4 times when using Oracle 10g. For example, ABC table x varchar2(8) --> x varchar(32) -->x varchar(8) --> x varchar(8) {Oracle 10g SSIS(source) SSIS(target) SQL Server}
This doesn€™t influence the loaded result (I did not find any problem until now), but that influence loading performance and we worry about potential problems. Do you have any idea or have you met the same problem before?
I need to get recordset returned by oracle sp in execute sql task to process futher in For Each Loop container and on same lines i want to use oracle sp for extraction data in Data Flow Task. Could anybody suggest if it how we could do it in SSIS?
My software vendor limits the sessions to one (1) per log-in to Oracle 9i and I€™m having tons of problems trying to extract data through an SSIS package. Everytime I run the package SSIS already logged in and the OLE DB source fails because of the sessions exceeded error. Is there any way to limit the connection to just when I need the data to pump across on the OLE DB source?
Hi, I'm new to SSRS but have a problem connecting to Oracle. I have placed my reports upon a reporting server but the shared data connection isn't working and I'm confused as to why. I have specified the name, connection type as "Oracle", set the correct user id and password for the credentials and the connection string as for example 'Data Source=oracleExample;Unicode="True"'. I also have set the correct entry in the tnsnames.ora file for this datasource, example: "oracleExample = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 12.23.45.23)(PORT = 3425)) ) (CONNECT_DATA = (SID = oracle) ) )" Unfortunately I receive the following error when trying to connect. " An error has occurred during report processing. Cannot create a connection to data source 'oracleDataSource'. For more information about this error navigate to the report server on the local server machine, or enable remote errors " I'm mystified as to what the issue is. Any ideas? Would restarting the report server pick up the tnsnames.ora file? I have this working locally using report designer. Any help, much appreciated.
I'm attempting to use SSRS (2005) with my Oracle RDB database (old DEC RDB), using an ODBC driver. I am able to create a report, and view data, but I need to add some report parameters to filter the data. When I attempt to use parameters in the query, I either get a syntax error, or a message that my odbc connection cannot use "named" parameters, and that I should use "unnamed" parameters.
The "Tickler_Date" field is a binary date field. The above syntax is pulled from a Crystal Report, which I am considering moving over to SSRS. Ideally, I would like the user to enter a single RunDate parameter, and have the query do the following:
Where (Application_Notes.Tickler_Date >= @RunDate and Application_Notes.Tickler_Date < (@RunDate + 1 day) )
If the user has to enter two dates, that will be fine, but I can't seem to get past the errors.
What could be simpler: map a flat file record structure, extract the data, and populate essentially the same flat file record struc in an Oracle table. Let the fun begin.
Specifically: the flat file record struc is fixed length 196 bytes. A particular field consists of 4 bytes of Integer data; IS deals very nicely with the definition, does not appear to be any issue with that. The issue is trying to get the 4 bytes of integer to map and load into the Oracle table. The data type in the flat file def is DT_UI4. The data type in the Oracle target is DT_NUMERIC. One would think that perhaps a simple transform and Viola?! I've defined the transform but does not seem to matter - whatever I try yeilds the same results.
I 've tried many different src/trg data type defs., but all yeild the same results.
Execution Results from debug:
Everything validates and then...
[kcd [8671]] Error: Data conversion failed. The data conversion for column "load_time_min" returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
[kcd [8671]] Error: The "output column "load_time_min" (11050)" failed because error code 0xC0209084 occurred, and the error row disposition on "output column "load_time_min" (11050)" specifies failure on error. An error occurred on the specified object of the specified component.
Hello Everyone, Please do inform me, how can I check if there is a new record or changed record from the source.
NOTE: my source is Flat File and destination is Oracle Table.
What is needed from my side is the history load (Type 2). This is not possible thru SCD component in Integration Services, If my source is Oracle (Even after I had added the parameters in my OLE DB) Please do inform me about this process. Very important.
Provider cannot derive parameter information and SetParameterInfo has not been called. (Microsoft OLE DB Provider for Oracle)
I am getting the above error while opening the parameter box at OLEDB source for Oracle using SQL command option at Data Access Mode?? Can you any one please help me in this regard and trouble shoot this problem..
My application which ran perfectly well yesterday suddenly stopped working in this morning with following error message. I didn't change anything, at least I believe. Interesting thing is that I don't use any Oracle connection but connects to MS SQL Server 2005 Express version locally. Error messages are different according to the connection string though I don't think it makes difference: ConnectionString = <add key="Databasehandtool1" value="Data Source=.SQLEXPRESS;Database=handtool;SSPI=true" />ErrorMessage from VS2008 ="Unable to get records. Object reference not set to an instance of an object." ConnectionString = <add key="Databasehandtool1" value="Data Source=.SQLEXPRESS;Database=handtool;User Id=handtool_DB;Password=mypassword" />ErrorMessage from VS2008 = "Unable to get records. Unable to connect to database. ORA-12154: TNS:could not resolve the connect identifier specified." By the way, the application was generated from IronSpeed 5.1 Enterprise. My development environment is : VS2008, SQL2005 EXPRESS, Windows XP SP2, ASP.NET 2.0 We have actually an Oracle server in the network though. My gut feeling is that something might have changed in my network server during the night but how come it can possibly affect my application running on my local PC. I checked the connection of local SQL Express Server from SQL Server Management Studio and it connected well with UserID=handtoo_DB and showed all tables and stored procedures required for the application. So there is no problem in SQL Server database side. I would welcome and appreciate any input. fudata
In many DTS packages I have used parameterised queries for incremental loads from Oracle database sources using the Microsoft ODBC Driver for Oracle.
Now I want to migrate these packages to SSIS, but the OLE DB connection for Oracle does not support parameters.
I cannot use the "SQL command from variable" data access mode because of the 4000 character limitation on the length of string variables and expressions.
I have a unique problem while connecting to oracle source with a 64 bit processor. I can connect to the oracle from the command prompt in the 64 bit processor but not from SSIS.
The acutal problem is, when check the properties of the connection manager and provide a provider for oracle, and then provide username and password and click on test connection. I get the following error:
"Test Connection failed because of an error in initializing provider.ORA-06413: Connection not open"
I have an issue when using Report Manager for viewing reports that use a certain Oracle data source. When viewing the reports in Report Designer the reports display without problems. But when trying to display the reports with Report Manager, after deploying the reports to the Report Server, I now get the following error message:
blablabla....ORA-12705: invalid or unknown NLS parameter value specified
For testing purposes I am running Report Designer, Report Server and Report Manager locally on a PC with Windows XP. I am using Reporting Services 2005, IIS 6, Visual Studio 2005, an Oracle 9.x client and an Oracle 9.x (not 100% sure) database that is hosted on a remote server.
Earlier I got an error message that stated "ORA-12154: TNS: could not resolve the connect identifier specified". Access rights to some Oracle folders for the Network service account did the trick here but then I got the "NLS parameter" error message. What I have tried to do is removing the NLS_LANG register variable and also modified the value of the variable so that it matches the value of the NLS_LANG variable on the server that hosts the Oracle database, but none of them have worked. Any ideas?
Maybe this is an issue that is more appropriate in an Oracle forum but what the heck..the problem could reside in Reporting Services..
I get this error. Does any body came across this and found some solution?
Compiler Error Message: CS0433: The type 'Microsoft.Web.UI.ScriptManager' exists in both 'c:WINDOWS.000Microsoft.NETFrameworkv2.0.50727Temporary ASP.NET Fileswebsites_hrdbms3acda2bba63d28c5assemblydl332deaeca 05606e1_3759c601Microsoft.Web.Atlas.DLL' and 'c:WINDOWS.000assemblyGAC_MSILMicrosoft.Web.Extensions1.0.61025.0__31bf3856ad364e35Microsoft.Web.Extensions.dll'
I have created the application with ATLAS July CTP . currently upgraded to ASP.NET AJAX BETA 1. I face the above problem
Hello all, I have read many topics about this error but it doesn't fix my packages in my particular case. The problem is that I access to a database in Oracle using the Ole DB provider for Oracle
I get that the mentioned error when I try to run a job from the agent.
1 - When I set "DontSaveSensitive" to ProtectionLevel I get this error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E4D Description: "ORA-01017: username/password no valid". This is normal because the connection needs a password.
2 - When I set "EncryptSensitiveWithUserKey" to ProtectionLevel I get the mentioned error: "Failed to decrypt protected XML node "DTSassword" ..
The other options to ProtectionLevel doesn't work neither. I have tried to write the password in the field required...
I have tried many possibilities but nothing new, it doesn't work.
Does anybody have this error with Oracle as source file ???
hey guys i keep getting this error and I am not sure how to sort it and google just aint working for me tonight. Exception Details: System.InvalidOperationException: The ConnectionString property has not been initialized.
Line 31: SqlDbType.VarChar, 40)) Line 32: objCmd.Parameters("@IssueName").Value = IssueName.Text Line 33: objCmd.Connection.Open() Line 34: ' Test whether the new row can be added and display the Line 35: ' appropriate message box to the user.
[InvalidOperationException: The ConnectionString property has not been initialized.] System.Data.SqlClient.SqlConnection.PermissionDemand() +852131 System.Data.SqlClient.SqlConnectionFactory.PermissionDemand(DbConnection outerConnection) +22 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 ASP.newpriority_aspx.submit(Object Source, EventArgs e) in C:Prototypeofficial1htmlewpriority.aspx:33 System.Web.UI.HtmlControls.HtmlInputButton.OnServerClick(EventArgs e) +105 System.Web.UI.HtmlControls.HtmlInputButton.RaisePostBackEvent(String eventArgument) +106 System.Web.UI.HtmlControls.HtmlInputButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
Dim strConnection as string = ConfigurationSettings.AppSettings("GeolinkSupportdb") Dim sqlConn = New SqlConnection(strConnection) Sub Page_Load(sender as Object, e as EventArgs)
End Sub
Sub submit(Source As Object, e As EventArgs) 'assign the user entered information Dim objCmd As SqlCommand 'Dim dbIssueName = IssueName.Text 'You must open the connection before populating the DataReader Dim strSQL1 = "Insert into Support_Issue Values @IssueName" 'SqlConn.Open() objCmd = New SQLCommand(strSQL1, SqlConn) objCmd.Parameters.Add(New SqlParameter("@IssueName", _ SqlDbType.VarChar, 40)) objCmd.Parameters("@IssueName").Value = IssueName.Text objCmd.Connection.Open() ' Test whether the new row can be added and display the ' appropriate message box to the user. Try objCmd.ExecuteNonQuery() Message.InnerHtml = "<b>Record Added</b><br>" & strSQL1 Catch ex As SqlException If ex.Number = 2627 Then Message.InnerHtml = "ERROR: A record already exists with " _ & "the same primary key" Else Message.InnerHtml = "ERROR: Could not add record, please " _ & "ensure the fields are correctly filled out" Message.Style("color") = "red" End If End Try objCmd.Connection.Close() End Sub </script> database looks like this IssueID UniqueIdentifer IssueName varchar(50)
Any idea on why I cannot get my connection string to work have I missed something or trying to connect to it wrongly?
Recently i have installed Ms CRM 3.0 on a server wich uses IIS as platform and CRM application as default website. And, the Report Server is running when i access it using Ms internet explorer but when i try to using the application I receive an error message that says " Reports.config has invalid schema and could not be loaded " any Ideas!!! I need a solution ASAP so your help is highly appreciated and thx
I've not found the answer to this one as it applies to Vista. When installing SQL Server Express which was downloaded from the microsoft website, I get the message "SQL Server System Configuration Checker cannot be executed due to WMI configuration on the machine....." I have tried the wmifix program with no results. Also followed a link to another fix that wasnt appropriate for Vista. Any help would be appreciated. I am logged in as an administrator, and am running Vista Home Basic. Thanks for your help.
3.Create linked server with scripts: exec sp_addlinkedserver N'MyOracle1', 'Oracle', 'ORAOLEDB.Oracle', N'//10.154.14.235', N'FetchSize=2000', '' exec sp_addlinkedsrvlogin @rmtsrvname='MyOracle', @useself=N'FALSE', @rmtuser=N'root', @rmtpassword='Sqlexp!23' Â Â 4. After create successful and testing the connection ,I got the error below.(My windows firewall is turn off)
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
Cannot initialize the data source object of OLE DB provider "ORAOLEDB.Oracle" for linked server "MyOracle".OLE DB provider "ORAOLEDB.Oracle" for linked server "MyOracle" returned message "ORA-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA". (Microsoft SQL Server, Error: 7303)
I'm trying to configure ASP.NET2.0 Application to use SQL Server 2000 and yes i did make sure all my setup in configuration manager is setup and the surface area Whenever i ran the REGSQL .EXE CMD it works until i get to where it suppose to give you a list of data instance to choose from base on ScottGu article in step 4 I'm running SQLEXPRESS ADVANCE VWD EXPRESS 05 Thanks
OK so I have this SSIS package that uses a connection call "Conn1". I added this to my configuration file (which also contains connections called "Conn2" and "Conn3" which are used by other packages. Works fine in DEV when run via SQL Agent. I moved SSIS package and config file to prod server. SQL Agent now throws error on this package saying it cannot resolve path to "Conn3". This package doesn't use "Conn3"... I opened both the SSIS package and the Config file in notepad and verified Conn3 wasn't referenced in the package... HELP !!!!
I am developing one SSIS package to migrate an Oracle Database to SQL Server 2005 DB through ODBC. My problem is with configuration. I have to use configuration file so that in production environment the end-user must be able to change the user credentials to connect both database servers. I am trying xml configuration file. When I try to use xml configuration, my odbc connection is giving error. But if I disable the configuration through "Package Configurations Organizer", it works fine. Using an XML Editor I checked the .dtsconfig file and entered both passwords for the both connections.
I tried logging and below are the few text from log file related to error.
Code Block User:Diagnostic, Nebu, BLRDOMNebu, DestOdbcConnection,{E3535ED4-1D21-41B9-9796-E9F5B47FFD5B}, {6820E259-18FF-4FCA-B820-73EE931D2095},12/17/2007 8:16:39 PM,12/17/2007 8:16:39 PM,0,0x,ExternalRequest_pre: The object is ready to make the following external request: 'IDbConnection.Open'.
User:Diagnostic,Nebu, BLRDOMNebu, DestOdbcConnection,{E3535ED4-1D21-41B9-9796-E9F5B47FFD5B},{6820E259-18FF-4FCA-B820-73EE931D2095},12/17/2007 8:16:41 PM,12/17/2007 8:16:41 PM,0,0x,ExternalRequest_post: 'IDbConnection.Open failed'. The external request has completed.
I am using Protection level = EncryptSensitiveWithPassword for the package.
