Is there any way to use a single record (Which had Connection String) for all my packages in the project ?
I don't want to have multiple connection informations for each of the packages (Based on Configuration Filter)
I've read that a single config file can be used across multiple packages, but am unsure if it applies to what I'm trying to achieve. As an example, I have 2 packages, PackageA and PackageB. Each package has a connection manager defined - ManagerA and ManagerB and I want a single package configuration file to contain the connection string for each manager.
I can define the package configuration of PackageA with no problems. I choose XML file, define the filename and add the connection string to the config.
I then open PackageB Package Configuration and point it to the existing config file, IS tells me the file already exists and allows me to choose the option to "Reuse Existing". I then supply a configuration name and the wizard finishes, without letting me expose any properties. At this point, the configuration file still contains config details from PackageA.
If I then choose to Edit the package configuration in PackageB, I get a warning saying the config values in the config file (relating to PackageA) cannot be found, and the wizard continues. The subsequent PackageB properties which I add overwrite the existing PackageA properties.
So it would appear that what I'm trying to do cannot be done, and I need a separate configuration file for each package?
Any ideas much appreciated.
Greg.
I want to store multiple config files into single table I am unable to do it.
View 8 Replies View RelatedHi all!
I have imported a table into SQL Server from a legacy program. Each record has a repeating sequence of similar fields. (Ex. Accnt1, Assesed1, Paid1, Accnt2, Assesed2, Paid2, etc.) I would like to take a single record and put data from these fields into a table that has the columns Accnt, Assesed, and Paid. I am doing this for easier use in a program I am developing in VB 2005. Can this be done in SQL or do I need to have help from some VB code? If it's possible, what might the SQL look like?
Thanks.
I'm trying to pull all records from one table and just a single record from another. I have this join, (see below). It works ok, but the problem is if a blog record doesn't have a corresponding image record it doesn't return. The end result should be the blog record and a single corresponding image record. But always a blog record.
SELECT
[Blogs].[ID],
[Blogs].[BlogTitle],
[Blogs].[BlogType],
[Blogs].[BlogText],
[code]...
I have table "Clients" who have associated records in table "Mailings"
I want to populate a gridview using a single query that grabs all the info I need so that I may utilize the gridview's built in sorting.
I'm trying to return records containing the next upcoming mailing for each client.
The closest I can get is below:
I'm using GROUP BY because it allows me to return a single record for each client and the MIN part allows me to return the associated record in the mailings table for each client that contains the next upcoming 'send_date'
SELECT MIN(dbo.tbl_clients.client_last_name) AS exp_last_name, MIN(dbo.tbl_mailings.send_date) AS exp_send_date, MIN(dbo.tbl_mailings.user_id) AS exp_user_id, dbo.tbl_clients.client_id, MIN(dbo.tbl_mailings.mailing_id) AS exp_mailing_idFROM dbo.tbl_clients INNER JOIN
dbo.tbl_mailings ON dbo.tbl_clients.client_id = dbo.tbl_mailings.client_idWHERE (dbo.tbl_mailings.user_id = 1000)GROUP BY dbo.tbl_clients.client_id
The user_id set at 1000 part is what makes it rightly pull in all clients for a particular user. Problem is, by using the GROUP BY statement I'm just getting the lowest 'mailing_id' number and NOT the actual entry associated with mailing item I want to return. Same goes for the last_name field. Perhaps I need to have a subquery within my WHERE clause?Or am I barking up the wrong tree entirely..
I would like to use one configuration file for multiple SSIS packages. How I want to do this is to save the connection string of my production server with the initial database field excluded and set that per package file. I am able to read in the configuration file into 2 different packages without issue but I cannot see how to extract the connection string into a ODBC Database Connection object in order to set the initial database. Is there some way I am not thinking of to do this, either through the designer or programatically?
Thanks for any help you all can provide! I am so n00b to SSIS.
All,
I have several packages that all use the same DTSConfig file to map the OLEDB connections. This works fine in the development environment, however when i run a rebuild with Deployment set to true i get the error
Error 75
System.ApplicationException: Could not copy file "C:Dev_TFSTowergateTowergate.BdwTowergate.Bdw.Ssis.TransformPackagePath.dtsConfig" to the deployment utility output directory "C:Dev_TFSTowergateTowergate.BdwTowergate.Bdw.Ssis.TransforminDeployment". ---> System.IO.IOException: The file 'C:Dev_TFSTowergateTowergate.BdwTowergate.Bdw.Ssis.TransforminDeploymentPackagePath.dtsConfig' already exists.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.InternalCopy(String sourceFileName, String destFileName, Boolean overwrite)
at Microsoft.DataTransformationServices.Project.DataTransformationsProjectBuilder.CopyFiles(ICollection fileNames, String outputPath) --- End of inner exception stack trace ---
at Microsoft.DataTransformationServices.Project.DataTransformationsProjectBuilder.CopyFiles(ICollection fileNames, String outputPath)
at Microsoft.DataTransformationServices.Project.DataTransformationsProjectBuilder.CreateDeploymentUtility(IOutputWindow outputWindow)
The DTSConfig file is included in the project under Misc in the development studio as all developers need to have access to the same config file.
The net result is that the MSI deployment package doesnt get built so we cannot do an automated delivery of the data.
Is there a work round or a setting that i can implement to remove the error?
TIA
I have a package that executes 3 other packages in it. From the command line I pass in which config file to use (just contains db/seerver) does this setting get carried over into the child packages as well?
View 3 Replies View RelatedHi All,
I am working on a project currently where we have many SSIS packages and we want to minimize the number of config files to be used. What I was thinking was using one master config file which will have Server/Database info which will be used by all the packages. Now the thing is there are multiple packages which are being executed from within a master package and I was wondering if this will be an issue. Is there anything else that I will have to keep in mind? Any help is appreciated.
Thanks
Hey guys and girls,
This seems like a no brainer, but it's driving me nuts. I want one XML file for the entire solution. There are multiple packages in the solution which have different Connections in the conntion Managers. The packages share some connection names, and some are unique to the package.
Example:
LoadData.dtsx would have a source database connection named (SourceDB_OLEDB) and a oledb connection (DataWarehouse_OLEDB).
LoadDataMart.dtsx would use the same name for the (DataWarehouse_OLEDB) connection and have another oledb connection (DataMart_OLEDB)
I want one XML config file that has all the connection strings, but the problem is that the LoadDataMart.dtsx will throw an error:
Error 1 Error loading LoadDataMart.dtsx: The connection "SourceDB_OLEDB" is not found. This error is thrown by Connections collection when the specific connection element is not found. c:ssisLoadDataMart.dtsx 1 1
Thanks,
James
I have a parent package that uses Execute Package Task against three child packages. They are all setup to use the same configuration file, and the packages are all located in the same folder. Purpose of the configuation is to use the same connection strings for each child package.
I removed the path from the config. file specification to facilitate deployment. During debugging, the child packages cannot find the config file when they are run via the parent unless the full path is specified. If run standalone, a child package can find the config. file without the path. As I said, all dtsx filaes and the config file is in the same folder.
Also, the password-removal issue is killing me in development. Everytime I touch the config. file, it removes the password from the connection string. I have "protection level" set to "don't save sensitive" - I'd appreciate help with this too.
thanks
I have deployed to production a number of nested packages (parent packages that call child packages) to the SQL msdb via the Save As option rather than building a deployment utility. These packages reference configuration files in a static location off of the c: drive on the production server. In the development environment, when connection changes are made and I run the Reload with Upgrade option the connection manager takes on the new server and user id settings. However, out on the production side I get the following error from the SQL job log:
Cannot load the XML configuration file. The XML configuration file may be malformed or not valid.
As a result the SQL job uses the default connection information which references the development database rather than the production database. I did research the error but found no good solutions. Is there a way to ensure the configuration files are formed correctly and that the packages are correctly referencing the configuration files? We are trying to run the ETL updates via a SQL job.
Any suggestions? Thanks.
T
Hi,
I'm fairly new to the SSIS world, and I've recently ported a bunch of dts packages over to SSIS. I'm an ASP.NET developer so I'm very familiar with the capabilities that configuration files give you, and I attempted to set up my solution as follows:
All of my "Data Sources" are at the project level, and added (with the same name) to each package. I wanted to have a single config file that had all of the project-level settings (i.e. connection strings, data file paths, etc). I then have a config for each package with the package level settings - i.e. variables, etc.
The problem becomes that all packages do not use all data sources. This results in an error when I try to open up a package for editing, it complains that it doesn't have a reference to data source XYZ that it is seeing in the configuration file.
Is there any way that I can get around this? If I have a password to a database change, I don't want to have to look through every config file and change it in multiple places.
OK,
This one is driving me nuts. I've issued a very simple statement to delete a single row from a table. It appears that when I execute it in SQL Query Analyzer the CPUTime spikes and holds one of the CPUs on the box pegged at 100%. I've let this thing run for over a day, and it's not deleting the one damn record. Any thoughts? :confused: :confused: Here's the command I'm executing:
DELETE FROM Invoices WHERE InvoiceID = 153345
Running SELECT * FROM Invoices WHERE InvoiceID = 153345 returns only a single record as it should. InvoiceID is the PK in this table. Any and all help is greatly appreciated. I've rebooted the server, but to no avail. Same thing happens after a reboot.
TIA
Can you please assist me on how to get the 2nd record in case there are3 or more records of an employee, the query below gets the MAX and MINBasicSalary. However, my MIN Basic Salary is wrong because I should getthe Basic Salary Prior to the 1st Record (DESC)in case there are 3 ormore records and not the last Basic Salary of the Last Record.How to GET the 2nd Row of Record in Case that There are 3 or morerecords IN A SINGLE ROW ???---------------------------------------------------------------------------*-----This query gets the Max and Min Basic Salary on a certain Date Range.In case there are 5 records of an employee on certain date range howcan I get the record before the Max and would reflect as my OLDBASIC,if I use TOP2 DESC it will display 2 records. I only need one recordwhich should be the Basic Salary before the 1st record on a DESC order.Please add the solution to my 2nd Select Statement which get theOLDBASIC salary Thanks ...SELECT TOP 100 PERCENT E.EmployeeNo, E.LastName, E.FirstName,E.SectionCode, E.Department, E.DateHired, E.Remarks,(SELECT TOP 1 ([BasicSalary])FROM empsalaries AS T14WHERE T14.employeeno = E.employeeno AND startdate BETWEEN @FromDate AND@ToDateORDER BY startdate DESC) AS NEWBASIC,******************************* BELOW I SHOULD ALWAYS GET THE BASICSALARY PRIOR TO THE 1ST RECORD AND IN A SINGLE ROW ???(SELECT TOP 1 ([BasicSalary]) (FROM empsalaries AS T14WHERE T14.employeeno = E.employeeno AND startdate BETWEEN @FromDate AND@ToDateORDER BY startdate ASC) AS OLDBASICFROM dbo.Employees EWHERE CONVERT(VARCHAR(10),E.DateHired, 101) BETWEEN @FromDate AND@ToDate ORDER BY E.LastName
View 2 Replies View RelatedFrom SQL Server Books Online, there is a topic: Concurrency Effects, and did mention the following side effects:
- Lost updates.
- Uncommitted dependency (dirty read).
- Inconsistent analysis (nonrepeatable read).
- Phantom reads.
Can someone please tell me which type of Isolation Levels in the Database Engine to avoid the above side effects respectively.
For Record Locking issue:
Example, two editors make an electronic copy of the same document. Each editor changes the copy independently and then saves the changed copy thereby overwriting the original document. The editor who saves the changed copy last overwrites the changes made by the other editor.
This problem could be avoided if one editor could not access the file until the other editor had finished and committed the transaction.
For the above example, is it possible to do like this way:
Editor 1: SELECT and Lock a record
Editor 2: Before SELECT the record, check for the record whether it is locked or not. If it is not lock, then the record can be selected
Please advise.
Thanks.
I am using a drop down list box to select values from an SQL 2000 DB. I have put a record into the table which says"...Select Item"I used the dots so that It will apear at the top of the list and therefore display at startup. I also have a gridview to allow users to edit and delete from the same table.I am worried that a user may accidently delete the "...Select Item" row from the table.Can anyone think of a way round this? Is it possible with SQL Server 2000 to stop a single record from being deleted?Any help would be most appreciated.ThanksPaul
View 4 Replies View RelatedHiIs it possible to return the results of a query so that instead ofhaving say 10 rows its concatenated, egMy query returns 'M' 10 times, can this be returned as 'M M M M M M MM M M'?ThanksLee
View 3 Replies View RelatedHow to get
Code Block
a record value instead of aggregated value with GROUP BY?
Assume that I have a PRODUCT_COMMENT table defined as below. It logs
the multiple comments for products. A product may have multiple
comments logged at different time.
Code Block
CREATE TABLE [dbo].[PRODUCT_COMMENT](
[COMMENT_ID] [int] IDENTITY(1,1) NOT NULL,
[PRODUCT_ID] [int] NOT NULL,
[COMMENT] [nvarchar](50) NULL,
[UPDATED_ON] [datetime] NOT NULL,
CONSTRAINT [PK_PRODUCT_COMMENT] PRIMARY KEY CLUSTERED
(
[COMMENT_ID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY
= OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[PRODUCT_COMMENT] WITH CHECK ADD CONSTRAINT
[FK_PRODUCT_COMMENT_PRODUCT] FOREIGN KEY([PRODUCT_ID])
REFERENCES [dbo].[PRODUCT] ([PRODUCT_ID])
GO
ALTER TABLE [dbo].[PRODUCT_COMMENT] CHECK CONSTRAINT
[FK_PRODUCT_COMMENT_PRODUCT]
I would like to use the following SQL statement to get the latest
comments for all products.
Code Block
SELECT PRODUCT_ID, COMMENT, UPDATED_ON
FROM PRODUCT_COMMENT
GROUP BY PRODUCT_ID
HAVING UPDATED_ON = MAX(UPDATED_ON)
But this leads to the following error:
Code Block
Column 'PRODUCT_COMMENT.UPDATED_ON' is invalid in the HAVING clause
because it is not contained in either an aggregate function or the
GROUP BY clause.
Is there a way to do that?
Thanks!
Is me again,and now i facing problem to retrieve a single record from the database.
here is my code:
Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click Dim user As String user = TextBox1.Text Dim varpassword Dim mydata As SqlDataSource
mydata.SelectCommand = "Select * from tbluser where uLogin = '" & user & "'" varpassword = mydata.SelectCommand.uPassword
End SubEnd Class
but i get the error : 'uPassword' is not a member of 'String'
i wan to retrieve the password of that user,can anyone help me?
thanks
Hi ,
I little question for you ... is it possibile to write a SQL statement to delete records in several tables at the same time?
For example if I've two tables involved by join
DELETE <...> from Customers A
INNER JOIN CustomerProperties B ON A.CustomerID=B.CustomerID
I Must use two statement to remove records from both the tables?
Thx
I have two tables
TermID, Term
1--- Abc
2--- Test
4--- Tunic
and
TermID, RelatedTermID
1 --- 2
1--- 4
2--- 4
I need to get back something like this
TermID, Term, RelatedTermsInformation
1--- test--- test,tunic#1,4
that above was my solution, get the relatedterms information and comma separate, and then put a # and get all the ids comma separate them and then put the in one field. then I can later parse it in the client
this does not seem like a very good solution ( or is it?)
If posible it would be nice to get something like this
TermID, Term, RelatedTermsInformation
1 test RelatedTermsTwoDimentionalArray
but I am not sure how this idea could be implemented using the capabilities of SQL.
my other option is have the client make one call to the database to get the terms and then lots of another calls to get the relatedTerms, but that will mean one trip to the DB for the list term, and one call for every single term found.
any ideas in how to make this better ?
Hello:
I have the following table. There are eight section IDs in all. I want to return a single row for each product with the various section results that I have information on.
productID SectionID statusID
10 1 0
10 2 1
10 3 2
10 4 1
10 5 3
10 6 1
11 1 0
11 2 1
11 3 2
11 7 3
11 8 3
Need to return two rows with the respective values for each section.
productID section1 section2 section3 section4 section5 section6 section7 section8
10 0 1 2 1 3 1
11 0 1 2 3 3
Any information or if you can point me in the right direction would be appreciated.
Thanks
Hi, I have a difficult case that I need to solve. I will try to be the very clear explaining my problem:
I have a sql query which brings me many records.
This records have a column in common which have the same value (COL1)
There is a second column (COL2) which has different values bewteen these records.
I need to concatenate values from the second column in records with same value in COL1. And I need only one record of the ones that have the same values. If two records have the same COL1 value, only one row should be in my result.
Let me give you an example:
COL1 COL2
RECORD1 1-A HHH
RECORD2 1-A GGG
RECORD3 1-B LLL
RECORD4 1-B MMM
RECORD4 1-B OOO
RECORD5 1-C NNN
Me result should be:
COL1 COL2
RECORD 1-A HHHGGG
RECORD 1-B LLLMMMOOO
RECORD 1-C NNN
It is clear what I need? I dont know if I can solve it through sql or any function inside SSIS.
Thanks for any help you can give me.
How can i combine my data in single row ? All data are in a single table sorted as employeeno, date
Code:
Employee No Date SALARY
1 10/30/2006 500
1 11/30/2006 1000
2 10/25/2006 800
3 10/26/2006 900
4 10/28/2006 1000
4 11/01/2006 8000
Should Appear
Code:
EmployeeNo Date1 OLDSALARY Date2 NEWSALARY
1 10/30/2006 500 11/30/2006 1000
2 10/25/2006 800
3 10/26/2006 900
4 10/28/2006 1000 11/01/2006 800
PLEASE HELP I REALLY NEED THE RIGHT QUERY FOR THIS OUTPUT.
THANKS IN ADVANCE
I have records like below, single query to get result below, basically records that has single entry only, which has type '0'
table : temp_test
idtype
c10
c25
c30
c40
c47
c59
c64
c60
c77
c80
c90
Result out of query
idtype
c10
c30
c80
c90
My tables look like this:
Users //
table
UserID // pk
UserName // varchar
UserFamilyName // varchar
User_Friends //
table
FriendsID // pk
UserID // fk
FamilyName // varchar
MY query:
SELECT
U.UserFamilyName, F.FamilyName
FROM
Users U LEFT
JOIN User_Friends
F ON U.UserID =
F.UserID
WHERE
U.UserName = ‘JOHN’
How do I adjust my query to select just the very first record from Users_friends, I want only the top first one.And if there are no friends how can I return an empty string instead of Null.
What is the most efficient standalone .NET class that can hold a single disconnected record? The class must also retain column names, but other schema is not relevant (.NET data type is sufficient).If I understand System.Data.Common.DbDataRecord, it provides an interface on a DbDataReader, and has no storage of its own.I'm familiar with DataSet, is that the only .NET-standard class to do this? Thank you,Shannon
View 7 Replies View RelatedHello,
I have problem for insert multiple query for insert in differenr tabels for a single record.
I have mail record for candidate and now i wants to insert candiate labour info, candidate passport detail in diff tabel like candidatLabour and candidatePassport,
i used two store procedure for it and i write code for it.and it works fine,but i think that if one SP executed and one record inserted but then some problem occure and 2nd SP not executed then...........
so plz help me
Thanks
Hello,
In SQL Server Management Studio (2005), 'Open table' command or a SELECT query displays table rows in a grid (or text).Please tell how to view a single row at a time i.e. all only ONE row is displayed at a time (evenly arranged to cover the screen).
This feature (Single record view) is available in other database client like TOAD.
Thank You
I am using DTS and VBScript in DataPump tasks in order to transfer large amounts of data from text files to an SQL database.
As the database uses a normalized schema, there is often the case of inserting multiple records in a destination table from various fields of the same record of the source text file.
For example, if the source record contains information about goods sold like date, customer, item code, item name and total amount, and does so for a maximum of 3 goods per sale (row), therefore has the structure:
[date], [custid], [code1], [name1], [amount1], [code2], [name2], [amount2], [code3], [name3], [amount3]
trying to transfer that record to a [SALES] target table (in a normalized database), we would have to split each source record as follows:
[date], [custid], [code1], [name1], [amount1]
[date], [custid], [code2], [name2], [amount2]
[date], [custid], [code3], [name3], [amount3]
What is the best way to do this using DTS?
I have tried using a datapump task and VBScript, and I guess it has to do with the DTSTransformStat_**** constants, but none of those I used seems to work
Vasilis Siatravanis,
siatravanisv@interamerican.gr , vasilliss@hotmail.com
I have 2 tables People and Scores. A person might have 1-5 scores (unknown at time of Query). I would like to query the two tables into a results table and if person does not have a record the score will be zero. Scores also have a test number so you know which score it is. I can get it done with Stored Proc but I have to use Temp tables and then put the temp tables together.
People
Name ID
Tom5
Dick2
Harry3
Larry4
Curly1
Scores
PrimaryKeyPeopleIDScoreTestNumber
12801
[code]....
Results
PrimaryKeyPeopleIdScore1Score2Score3Score4Score5Name
1110090807090Curly
22800000Dick
33909010000Harry
44507090900Larry
559070000Tom