Configurations And Child Packages
Aug 29, 2006
Hello,
I was hoping someone might be able to clarify how configuartions work with child packages. My process has 3 levels of packages. The main packages called two child packages each of which calls more child packages.
I'm using Configurations to pass variables from parent packages to child packages. But each level of packages contains Data Flow Source/Destination connections. I was planning on having only 1 XML Configuration file in the main package that would allow the data connections for the main package to be configured for the target enviornment. When the job is scheduled I will be able to point a configuration file for use with the main packages. But will that configuration file be applied to all child packages that will run? All of the Connections Managers have the same name so I'd like to make the change in one file.
If not, am I forced to define a parent/child variable to pass the Connection String from the parent to each of the child packages? Use an expression to set the Connection String dynamically? This seems like a lot of extra work, so I'd really like to see if there is a way to do it with an XML configuration file. Even if I have to definte the same config file for each of my 20+ packages.
Thanks
-Dan
View 5 Replies
ADVERTISEMENT
Feb 8, 2008
I searched for an answer for this, and found a few good threads, but none of them seem to be doing quite the same thing I'm trying to do.
I have two packages, parent and child. Parent does basic file manipulation -- encrypting/decrypting, moving from server to server, backing up to archive, pulling/pushing to external server via FTP, etc. It is completely dumb to what child does. Child is the guts of the data work -- the ETL package.
The goal is to have this one parent package be used by several ETL child packages. But not only can parent use different children (depending on which config is used when executing parent), but child can also handle different tasks, depending on a configuration it uses.
Let me break it down further.
Three packages:
ParentPackage - Used by all jobs
ChildPackage1 - Used for processing orders
ChildPackage2 - Used for processing inventory
Four configurations (thus four jobs):
Job1Configuration - Used for processing orders for ClientA
Job2Configuration - Used for processing orders for ClientB
Job3Configuration - Used for processing inventory for ClientA
Job4Configuration - Used for processing inventory for ClientB
Job1Configuration is set up to tell ParentPackage to use ChildPackage1, and to provide ChildPackage1 w/ various data for ClientA -- and so forth.
To my understanding, there is no passthrough of the config data from parent to child. A child package doesn't "inherit" or otherwise receive the information from the parent package, unless explicit variables are set up. This won't work for us, because ParentPackage is dumb of any data that the child packages may need. In other words, we don't want to set up ParentPacakge with every possible variable that every child package may need.
Also, I'm not aware of a way of setting up a job to provide a child package directly w/ a package configuration.
Is there any way to do what I'm trying to accomplish?
If I didn't explain something clearly, let me know and I will try to clarify.
Thanks in advance for your help.
Jerad
View 8 Replies
View Related
Sep 15, 2006
Hi All,
May be I am doing something wrong over here, but I have been trying in vain to test out a simple scenario where I can use my Parent Package configurations in my Child package. I have two packages ready and can someone please walk me through this process. Appreciate all help
Thanks
View 5 Replies
View Related
Sep 18, 2006
Hi All,
How can I pass configurations from Parent Packages to a child package? I am using Execute package task to execute a child package but am unable to configure a variable to pass configurations to a child package.
Thanks
View 5 Replies
View Related
Sep 12, 2006
Hi All,
I am working on a project currently where we have many SSIS packages and we want to minimize the number of config files to be used. What I was thinking was using one master config file which will have Server/Database info which will be used by all the packages. Now the thing is there are multiple packages which are being executed from within a master package and I was wondering if this will be an issue. Is there anything else that I will have to keep in mind? Any help is appreciated.
Thanks
View 3 Replies
View Related
May 17, 2007
I have a fairly simple SSIS project that has nested parent-child packages.
I am trying to find the best way to manage the connections strings so as to make the package portable across machines and environments. Currently there is one "master" package which calls 6 child packages. 1 of these child package calls 3 child packages of its own.
For the database connections, I've settled on creating a standardized .dtsConfig file for each server/login. This is a relatively small number (intially 8) that I don't expect to grow much.
I've taken a different approach for the file-system connections used by Execute Package components that call the child packages. For each package that has child packages, I store all the connection strings (paths) to the child packages in a single .dtsConfig file. This works well for the top-level "master" package where I can pass in the .dtsConfig file (that has the paths to the child packages) as a run-time option in the Execute Package Utility.
However, this approach seems to fall apart for the 2nd generation package that in turn call 3rd generation packages because I don't know how to get the .dtsConfig file (with the 3rd generation .dtsx package paths) path to this downstream dtsx package.
Though I'm sure there are others, the only two solutionsI can think of now are
(a)don't nest packages beyond 1 parent/child relationship -- not really an option or
(b)Store the path of .dtsConfig files for each .dtsx package as an environment variable on each machine. This option is unappealing because it would require adding an environment variable for every .dtsx package that has child packages. I don't think it would take long for this to grow into a large number, that would make managing environment variables cumbersome.
So far my experience with SSIS has been that there was a simple solution for each scenario I had. So this hoop jumping I'm going through seems to indicate I am just missing something.
Is there a better way I am just not getting?
View 1 Replies
View Related
Apr 20, 2007
hello again!, this time I'm trying to run a Master Package from the SQL Server Agent but I can't set relative paths to the connections for all the child packages that the master package contains.
It only finishes execution when I set absolute paths for all connections in the connection manager within the SSIS Project.
Is there any property in the SQL Server Agent or mayby a workaround to solve this?
View 7 Replies
View Related
Jun 29, 2006
It would appear that if a Child package is called more than once from a Parent using the 'Execute Package' task, then after the first execute the Parent Package Variables are not applied to child package. I.E we build dimensions in a master database and these are then loaded to a number of topic specific datamarts. We simply pass Parent variables to the child that hold source & target connection strings, the first time the package is called the correct database is accessed, subsequent Executes ignore the variables and use the original values. Manipulating the (our) event queue to run the package once results in the correct behaviour
Are packages cached when they are called from a Parent? if so is there a flag that I have missed to force a reload each time a child is executed?
This has just become a big problen for us so any guidance would greatly appreciated.
Paul
View 6 Replies
View Related
Nov 30, 2006
HI, I have some parent parent packages that calls child packages. When I added a bunch of packages, I faced the buffer out of memory error. I then decided to set the child packages property ExecuteOutOfProcess to TRUE. I noticed that the execution time is longer now. Is this a good practice to set the ExecuteOutOfProcess to true? If so, is it normal that the execution time is longer?
Thank you,
Ccote
View 2 Replies
View Related
Apr 11, 2008
I have around 10 packages for dim and fact Table load. Using deployment Utility i create setup and put the packages in to test environment.
Now my requirement is call all the packages in certain order from single package. Using Execute Package Task i could call only one package. how to achive this in deployment?
Thanks
Sam K
View 3 Replies
View Related
Mar 2, 2007
Hi there,
I have a Business Intelligence project containing 4 packages. One of the packages is a parent package that just runs the other 3 packages sequentially (passing in variables via Package Configurations).
When I set the properties of the Execute Package tasks in the parent package, it seems that I can only select SQL Server or File System locations for the child packages.
What I want to do is for the parent to run the packages in the Visual Studio Project so that I can debug the whole process. I don't want to be bothered deploying the child packages so that I can run them from the parent, at least not while I am debugging the whole process.
How do I get the children to run within Visual Studio as well as the parent? I can't for the life of me find anything on the MSDN about this.
Many thanks in advance.
Richard F
View 4 Replies
View Related
Nov 6, 2007
I have a parent package and three child packages.
In all packages they make connections to a SQL 2005 db which sits on the same instance as which the packages are being deployed.
In the Child packages these connections have the connection string set as a package property variable in Package configs and in the Parent package this variable exists correctly.
This variable in the Parent is itself defined in a PackageConfig which uses SQL Server as the holder for the configuration.
When I deploy the packages the connections to in the child packages fail, one connection by timing out, another with an acquire connection failure.
I have set the DelayValidation to false on all connections but it made no difference.
I have also increased the timeout to 180s but again still a failure.
When I deploy the parent package on its own it is successful, however when the child packages are deployed on their own these connections again fail to validate due to a timeout and connection failure, yet they are using the same connections defined in the parent.
The child packages are no larger than other single packags that I have deployed successfully with the same connection to the same server.
Is there anything special that I should be aware of regarding deployment of parent and child packages.
View 6 Replies
View Related
Aug 17, 2006
I have one package that executes 4 child packages (5 total). All 5 packages are set to log information using a connection string with a variable set at runtime for the location. The child packages use a parent variable to get the log connection string from the parent package.
The parent package logs fine, but a strange behavior occurs with the child packages.
The child packages all log data to the location used in the configuration file variable during runtime (like it's supposed to). However, I would get an error right before the first child package finishes execution saying path not found. Just for giggles, I created the folder I use in my development environment on the production environment. The error goes away, but the log file is created in that folder with no data in it. Subsequently, the log file with the data is created in the location set in the configuration file. Now I have two log files!!!!
Anybody know how to fix this?!
View 3 Replies
View Related
Jun 13, 2007
My packages are now in the filesystem. I have given the parent package a password in the properties window, saved the package and moved it to the run location.
I am using the SQL Job Agent to schedule the execution. My step command line reads:
dtexec /FILE "C:Pathparentpackage.dtsx" /De mypass /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING EW
Do the the 20 or so child and grandchild packages require passwords to run this way?
Thanks,
IanO
View 1 Replies
View Related
Sep 19, 2007
I have a package that executes 3 other packages in it. From the command line I pass in which config file to use (just contains db/seerver) does this setting get carried over into the child packages as well?
View 3 Replies
View Related
Feb 1, 2007
I currently have multiple (parent and child) packages using the same config file. The config file has entries for connections to a number of systems. All of them are not used from the child packages. Hence, my child package throws an error when it tries to configure using the same config file because it can't find the extra connections in my connection collection.
Does anyone have any ideas on the best way to go about resolving this? Is multiple config files (one for each connection) the only way?
Sachin
View 4 Replies
View Related
Oct 22, 2007
Hi,
I have been developing SSIS packages and recently I found a strange thing happening. When executing chilld packages from the parent packages the child packages dont open automatically in the Package Designer window. Hence I cant monitor the places where the errors/ row movement have happened in child pkgs without manually opening the them first and then executing the parent.
Sam
View 2 Replies
View Related
Oct 1, 2007
I am running a package with a parent child relationship.
in the parent package I am executing a loop that calls the child package each time it loops.
The child package is executing a SQL command that retuns data and attempts to load the data into a flat file.
The problem is that everytime the SQL changes the Metadata needs to change also.
How can I refresh the child packages Metadata dynamically.
I KNOW THAT I CAN'T REFRESH THE METADATA WHILE THE PACKAGE IS RUNNING.
But I can refresh the Metadata before the package executes.
Does anyone know how to script this?
Thank you
View 1 Replies
View Related
May 3, 2007
Hi,
I've found this problem that when I change settings in my configuration file it does not automatically apply to all child packages which uses the same configuration file if run from a job in SQL Server Agent. I need to open the package and save it again from BIDS. I use one "load group" package to execute all other packages.
Is there a way from the job configuration to set a setting so the package allways will have the newest configuration?
Regards
Simon
View 7 Replies
View Related
Feb 5, 2007
I have a parent package that uses Execute Package Task against three child packages. They are all setup to use the same configuration file, and the packages are all located in the same folder. Purpose of the configuation is to use the same connection strings for each child package.
I removed the path from the config. file specification to facilitate deployment. During debugging, the child packages cannot find the config file when they are run via the parent unless the full path is specified. If run standalone, a child package can find the config. file without the path. As I said, all dtsx filaes and the config file is in the same folder.
Also, the password-removal issue is killing me in development. Everytime I touch the config. file, it removes the password from the connection string. I have "protection level" set to "don't save sensitive" - I'd appreciate help with this too.
thanks
View 8 Replies
View Related
May 27, 2008
I've been executing a package and passing a parent variable to the child using package configurations but I'd now like to do this using a script task. The script task would then programmatically load the package and execute it.
How do I do this and still use the parent variable?
I've found examples of how to load a package but I haven't been able to find out how to I load it specifying the parent variables.
I think it's possible. MSDN shows the available methods but the example is for the base method.
http://msdn.microsoft.com/en-us/library/microsoft.sqlserver.dts.runtime.package.execute.aspx
Cheers,
Ben
View 1 Replies
View Related
Mar 9, 2015
I've not really used SSIS for a while, and I'm now building some in 2012 and trying to utilise some of the features in the 2012 SSIS catalogue; however I've hit a bit of a stumbling block.
What I'm trying to do is have a master/child package relationship, with several child packages and where the child packages themselves are dynamically called (i.e. the master package may call a different child package based upon some value or state of data already processed.)
When I try and create an expression for the PackageNameFromProject property... well, that property doesn't appear to set dynamically. I know how to do this for old style packages by creating expressions for the package name etc; but that way I can't use the package parameters I have from my master package.
View 2 Replies
View Related
Dec 18, 2007
Has anyone had experience of using Parent/Child packages while enlisting them in Transactions.
I tested this on a small sample and thought that I had got it to work, but in my real-world package it does not.
The parent package essentially calls three child packages.
In each child package there are multiple DFT's that import and transform data into SQL Server.
All data must be imported or not at all.
Therefore I created a FELC container into which three Exec child package tasks were placed.
The FELC is set to Trans Option 'Required' and the Exec child package tasks to supported.
Unfortunately upon failure of one of the DFT's in the child the data was not rolled back.
So initially we had in terms of container hierarchy for the Trans Option property:
Parent package Supported
FELC for calling child packages Required
Task execute child package Supported
Child package Suppored
Tasks Suppored
Looking at this more closely we thought that we would need
Parent package Supported
FELC for calling child packages Required
Task execute child package Required
Child package Required
Tasks Suppored
for it to work.
However, the latter now gives us failures with error messages on the tasks on the child packages.
[Execute SQL Task] Error: Failed to acquire connection "Conn ECARS1CEDImport". Connection may not be configured correctly or you may not have the right permissions on this connection.
Even more strange the first couple of tasks in the child pkg complete successfully even though they use the same connection listed in the error.
These tasks also have Event handlers.
View 7 Replies
View Related
Apr 4, 2007
I want to set multiple child packages running without waiting for them to complete in a parent SSIS package. The catch is that I will be running the same child package in multiple threads with different configuration variables set. I want to drive the config variables for the child packages via a SQL Server table, and start the execution of each child package from within a for-loop container.
Here's what I've tried, and why it didn't work:
1) Execute package task. Didn't work: Waits for the child package to complete before moving to the next step.
2) Kicking off the package via the "sp_start_job" stored proc in the msdn db. Didn't work: Can't specify config variable values.
3) Using the DTExec command line prompt. Didn't work: Same issue as 1). Waits for the package to complete.
Anything I'm missing? Any ideas on how to accomplish this?
View 9 Replies
View Related
Mar 21, 2007
Hi I have completed my first SSIS master package which runs a whole lot of child packages depending on value of expressions on workflow. (refer http://www.sqlis.com/306-3.aspx)
Each of my child packages is .dtsx file location and each Excute Package task uses the file connection.
The master parent package is also a dtsx file location which will be run by a SQL Server 2005 Agent
All good--problem is testing from BIDs--each time a Excecute package task is run--turns yellow a new tab appears apears in the design window --showing you that particular .dtsx file control flow detail. DTS never had this behaviour --can I turn this off in the BIDS ie as I have dozens of new tabs at run time which makes it very hard to keep track of the master package. All I want is the master package running from BIDs, and no new tabs appearing at run time???
Thanks kindly
Dave
View 4 Replies
View Related
Aug 8, 2013
How to pass variable from Parent to child and child to Parent Packages is this possible in SQL SSIS 2012. I need this only in SSIS 2012 ...
View 6 Replies
View Related
Oct 18, 2006
I have installed Office 2007 Beta 2 and SQL Server 2005 at my system.
I made 2 packages (C:Package.dtsx, C:Package1.dtsx). I am executing Package1 inside Package.dtsx using Executing Package Task.
In package1.dtsx there is some configuration that is coming at runtime(For each loop container having some file connections) , so I have put DelayValidation property of this package to True, but that did not work when I called this package from Package1.dtsx, then I found one workaround, I changed the ExecuteOutOfProcess of ExecutePacakge task to True,
Now the problem is that before installing Office 2007 the both were executing fine (it was taking some time in starting the second package because of OutOfProcess execution).
After installing Office 2007 I get the following error while executing the second package from first package.
Error: Error 0x800703E6 while loading package file "C:Package1.dtsx". Invalid access to memory location. .
This problem comes whenever the I execute the package having OutOfProcess property to true.
Is there any workaround for this, or I am wrong somewhere.
Thanks in advance.
Atul
View 3 Replies
View Related
Mar 31, 2008
Hey...
I am running a parent SSIS package (running sp2, 9.0.3042) that calls several child packages.
On our development server, we now cannot run this because we get 1 or more of these errors:
"Error 0x80004003 while preparing to load the package. Invalid pointer . "
"Error 0xC0011008 while preparing to load the package. Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored. . "
It is not occuring on the same packages. It varies every time it is run.
I can run every one of the child packages individually, using the same login ID that the parent is executed under.
The parent package works fine on my local machine and other servers running the same version of SSIS. Just not on this server.
Does anyone have any ideas???
Thanks
BobP
View 17 Replies
View Related
Jul 25, 2014
Basically i have three Tables
Request ID Parent ID Account Name Addresss
1452 1254789 Wendy's Atlanta Georgia
1453 1254789 Wendy's Norcross Georgia
1456 1254789 Waffle House Atlanta Georgia
Bid_ID Bid_Type Bid_Volume Bid_V Bid_D Bid_E Request_ID Parent ID
45897 Incentive 10 N/A N/A N/A 1452 1254789
45898 Incentive 10 N/A N/A N/A 1453 1254789
45899 Incentive 10 N/A N/A N/A 1456 1254789
Bid_Number Bid_Name Request_ID Parent ID
Q789456 Wendy'Off 1452 1254789
Q789457 Wendy'Reba 1452 1254789
Q789456 Wendy'Off 1453 1254789
Q789457 Wendy'Reba 1453 1254789
Q789456 Wendy'Off 1456 1254789
I want the Result
Parent ID Bid_Type Bid_Volume Bid_V Bid_D Bid_E AutoGeneratedCol
1254789 Incentive 10 N/A N/A N/A 1
1254789 Incentive 10 N/A N/A N/A 2
Bid Number AutoGeneratedCol_Link
Q789456 1
Q789457 1
Q789456 2
Request ID AutoGeneratedCol_Link
1452 1
1453 1
1456 2
View 1 Replies
View Related
Oct 22, 2007
............child |parent|.............a1 |a | .............a2 |a |.............a11 |a1 |.............b1 |b |.............b11 |b1 |.............b111 |b1 |.............
Here is my table I want to get all childs of "a" ie {a1,a11,a2}I mean recursivelyie child,chid of child ,child of child of child ........etc up to any extentet the table containHow can i for mulate the select querry?
View 3 Replies
View Related
Jun 26, 2015
I have a table with below kind of data,
DECLARE @TBL TABLE (ItemId INT IDENTITY(1,1), ItemName NVARCHAR(20), ItemDate DATE, ParentItemName NVARCHAR(20), ItemOrder INT, ReportId INT)
INSERT INTO @TBL (ItemName, ItemDate, ParentItemName, ItemOrder, ReportId)
VALUES ('Plan', '2015-06-01', NULL, 1, 20),('Design', '2015-06-01', NULL, 2, 20),('Test', '2015-06-20', NULL, 3, 20),('Complete', '2015-06-30', NULL, 4, 20),
('Design child A', '2015-06-02', 'Design', 1, 20), ('Design child B', '2015-06-01', 'Design', 2, 20),
('Test child A', '2015-06-10', 'Test', 1, 20), ('Test child B', '2015-06-09', 'Test', 2, 20), ('Test child C', '2015-06-08', 'Test', 3, 20),
('Test grand child A', '2015-06-08', 'Test child B', 1, 20), ('Test grand child B', '2015-06-08', 'Test child B', 2, 20)
select * from @TBL
Here I want,
1. to display all parent with ORDER BY ItemOrder (no need to sort by ItemDate)
2. display all child row right after their parent (ORDER BY ItemOrder if ItemDate are same, else ORDER BY ItemDate)
3. display all grand child row right after their parent (ORDER BY ItemOrder if ItemDate are same, else ORDER BY ItemDate)
Looking for below output ...
View 3 Replies
View Related
Nov 1, 2007
I have table "Clients" who have associated records in table "Mailings"
I want to populate a gridview using a single query that grabs all the info I need so that I may utilize the gridview's built in sorting.
I'm trying to return records containing the next upcoming mailing for each client.
The closest I can get is below:
I'm using GROUP BY because it allows me to return a single record for each client and the MIN part allows me to return the associated record in the mailings table for each client that contains the next upcoming 'send_date'
SELECT MIN(dbo.tbl_clients.client_last_name) AS exp_last_name, MIN(dbo.tbl_mailings.send_date) AS exp_send_date, MIN(dbo.tbl_mailings.user_id) AS exp_user_id, dbo.tbl_clients.client_id, MIN(dbo.tbl_mailings.mailing_id) AS exp_mailing_idFROM dbo.tbl_clients INNER JOIN
dbo.tbl_mailings ON dbo.tbl_clients.client_id = dbo.tbl_mailings.client_idWHERE (dbo.tbl_mailings.user_id = 1000)GROUP BY dbo.tbl_clients.client_id
The user_id set at 1000 part is what makes it rightly pull in all clients for a particular user. Problem is, by using the GROUP BY statement I'm just getting the lowest 'mailing_id' number and NOT the actual entry associated with mailing item I want to return. Same goes for the last_name field. Perhaps I need to have a subquery within my WHERE clause?Or am I barking up the wrong tree entirely..
View 7 Replies
View Related
May 19, 2015
Given the sample data and query below, I would like to know if it is possible to have the outcome be a single row, with the ChildTypeId, c.StartDate, c.EndDate being contained in the parent row. So, the outcome I'm hoping for based on the data below for ParentId = 1 would be:
1 2015-01-01 2015-12-31 AA 2015-01-01 2015-03-31 BB 2016-01-01 2016-03-31 CC 2017-01-01 2017-03-31 DD 2017-01-01 2017-03-31
declare @parent table (Id int not null primary key, StartDate date, EndDate date)
declare @child table (Id int not null primary key, ParentId int not null, ChildTypeId char(2) not null, StartDate date, EndDate date)
insert @parent select 1, '1/1/2015', '12/31/2015'
insert @child select 1, 1, 'AA', '1/1/2015', '3/31/2015'
[Code] .....
View 6 Replies
View Related
