Configure Report Server With SQL Server Express With Advanced Services.
May 30, 2006
I'm having a world of trouble with the Reporting Services Server. The install went fine. I went in to configure the Report Server and when creating the Report Server and the Report Manager virtual directories I get the following error: "The virtual directory could not be created. The previously set virtual directory will still be used." The problem with this is that I have not previously set a virtual directory. When clicking on the link I get the additional error information: "System.IO.FileNotFoundException:
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementObject.InvokeMethod(String methodName, ManagementBaseObject inParameters, InvokeMethodOptions options)
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.CreateVirtualDirectory(String virtualDirectory, String path)"
When I check IIS the directories were created but the Reporting Services Configuration Manager does not see them unless I attempt to recreate them again without deleting them from IIS.
I am trying to upgrade SQL Server Express 2005 Report Server to SQL 2005 Standard and it fails with the following error:
SQL Server Setup did not have the administrator permissions required to copy a file: C:Program FilesMicrosoft SQL ServerMSSQL.8Reporting ServicesReportServer ssrvpolicy.config. To continue, verify that the file exists, and either grant administrator permissions to the account currently running Setup or log in with an administrator account. Then run SQL Server Setup again.
After I click OK on the message, this whole path where the upgrade is bieng installed dissapears C:Program FilesMicrosoft SQL ServerMSSQL.8Reporting Services. The error is a bit missleading because the file that it is trying to copy rssrvpolicy.config does appear in that upgrade folder so I am not sure why it would try to copy a file that has already been copied.
I was able to upgrade the Database Engine instance fine but can't upgrade Reporting Services due to that error. I have verified that the account that ran the setup had the administrator permissions. Your prompt reply to my question would be greatly appreciatted.
What is the Difference between the SQL Server Express Bundled with C#/VB VS the downloadable SQL Server Express SP1 with advanced Services?
I installed C# with SQL Server Express, however I wanted to add the Full Text Searching and the SQL Server Management Studio Express, so I downloaded and installed the SQL Server 2005 Express Edition with Advanced Services SP1. When I installed it over top of my current installation, it complained of version mismatching, and then C# failed to recognize that I had SQL 2005 Express installed at all.
What I'd like to know is, which version is more current (they have to be different, they had different version numbers, one was 9.xx.xxxx the other was 2005.9.xx.xxxx) The one bundled with C#, or the SP1 downloadable one.
Firstly, I want to be up todate as far as security patches, and Secondly, how do I add the full text searching and SSMSE to the one bundled with C# without breaking it.
Folks, Today I saw that an upgraded(?) version of SQL Server express was available. Since it is supposed to have the ability to generate a script to put a database on a hosted server I decided to get it. Bad decision. I uninstalled my previous version of SSE. and attempted to install the SP2 version with Advanced Services. After three installs I finally got the server to start. Now I can not log onto it using Management Studio Express. I know the server is running because I can see it in the task manager and I can open one database used with an ASP.NET web site through Visual Studio. Can you provide any suggestions on how to find my server or server instances through Management Studio? Do I need to remove all sql server related items and do a complete reinstall? I can see the server in the Configuration Manager and in the Surface configuration manager. Any assistance would be greatly appreciated. I have spent way too much time on this.Thanks
Does SQL Server 2005 Express Edition with Advance Services comes with Reporting service. I mean to say If I have installed Express Edition in my computer, does seperate installation of Reporting service required.
i have an installation of SQL Server 2005 Express Edition and now i want to upgrade to SQL Server 2005 Express Edition with Advanced Services SP1 but without uninstall the old version...could someone help me...
While upgrading a client over PCAnywhere in another state, I inadvertantly installed
Microsoft SQL Server 2005 Express Edition with Advanced Services
I have had an absolute nightmare with SQL 2005 uninstalling it from a laptop on my desk, so you can understand why I don't want to try uninstalling the Advanced Services version on a computer over PCAnywhere.
However, the remote computer does not have IIS on it, which prompts a warning form Microsoft SQL Server 2005 Express Edition with Advanced Services.
So, the simple question is, if the program works Microsoft SQL Server 2005 Express Edition then I assume it will work with Microsoft SQL Server 2005 Express Edition with Advanced Services, since it doesn't use any advance services.
I installed the SQL Server Express Advances w/ Reporting Services, but it doesn't appear to be working. When I bring the URL up in my web browser all I get is this:
transam/ReportServer$SQLExpress - /
Microsoft SQL Server Reporting Services Version 9.00.2047.00
Any tips on where to begin looking for what is wrong?
I've been using SQL Server 2005 Std. for my development work on a laptop w/ 2 GHz Celeron and 768 Mb RAM. Now that Express Edition has Reporting Services and Full-Text Search, would I be wise to just use it instead? I actually have both on my machine since Express Edition installed with VS 2005 Standard. Also, if I uninstall SQL Server 2005 Std. what will I lose? Thanks in advance.
I recently downloaded and attempted to install this express edition. I currently have the SQL Server Standard 2005 installed on my cpu but is dedicated to the Business Manger for my Outlook 2007. Normally I suppose this is not an issue but the edition does not have the reporting feature, hence the reason for downloading this new edition. My system meets all required specs but when I get to the last step of configuration, I get an error message. The error message occurs while configuring the OWC11 and Reporting. After the rest is configured it then tells me that the program failed to install.I am running Microsoft Office 2007 with exception of Access, which is ver. 2000. I have all programs running in compatibiltiy mode since others in the office are still running Office 2000. Any suggestions would be welcome.
Error 1706. Setup cannot find the required files. Check your connection to the network or CD-Rom drive. For other potential solutions to this problem, see C:Program FilesMicrosoft OfficeOffice 111033SETUP.CHM.
Windows 2000 Professional (Build 2195: Service Pack 4)
Previous version of SQL Server 2005 Express Edition with Advanced Services CTP was removed using Add/Remove Programs
Visual Studio 2005 Professional is installed
WARNING MESSAGE (should it be an error message since what was requested did not take place?)
--------------------------- Microsoft SQL Server 2005 Setup --------------------------- Warning 28123.Warning: SQL Server Setup cannot install this feature because a different edition of this feature is already installed. For more information, see 'Version and Edition Upgrades' in SQL Server Books Online. --------------------------- OK ---------------------------
FAILED WORKAROUND STEPS
1. Used Add/Remove Programs to remove Microsoft SQL Server 2005 (there was only a single instance).
2. Since Microsoft SQL Server 2005 still appeared in the list of programs to remove, decided to reboot.
3. After reboot, Microsoft SQL Server 2005 still appeared in Add/Remove Programs. Clicked the Remove button a second time and clicked the Yes button to remove it from the list.
4. Used Add/Remove Programs to remove Microsoft SQL Server Management Studio Express.
5. Used Add/Remove Programs to remove Microsoft SQL Server Native Client.
22. Selected Latin1_General under Collation designator and sort order.
23. Unchecked Enable User Instances.
24. Setup fails on product Workstation Components, Books Online and Development Tools with the dialog box shown near the top of this post.
Summary Log
-------------------------------------------------------------------------------- Machine : SomeComputerName Product : Workstation Components, Books Online and Development Tools Warning : Warning 28123.Warning: SQL Server Setup cannot install this feature because a different edition of this feature is already installed. For more information, see 'Version and Edition Upgrades' in SQL Server Books Online. --------------------------------------------------------------------------------
Detailed Tools Log
=== Verbose logging started: 4/20/2006 10:55:39 Build type: SHIP UNICODE 3.01.4000.2435 Calling process: C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe === MSI (c) (04:B8) [10:55:39:234]: Resetting cached policy values MSI (c) (04:B8) [10:55:39:234]: Machine policy value 'Debug' is 0 MSI (c) (04:B8) [10:55:39:234]: ******* RunEngine: ******* Product: e:6771b864b449c707fd961a7fd719a8c1SetupSqlRun_Tools.msi ******* Action: ******* CommandLine: ********** MSI (c) (04:B8) [10:55:39:250]: Client-side and UI is none or basic: Running entire install on the server. MSI (c) (04:B8) [10:55:39:250]: Grabbed execution mutex. MSI (c) (04:B8) [10:55:39:250]: Cloaking enabled. MSI (c) (04:B8) [10:55:39:250]: Attempting to enable all disabled priveleges before calling Install on Server MSI (c) (04:B8) [10:55:39:250]: Incrementing counter to disable shutdown. Counter after increment: 0 MSI (s) (3C:88) [10:55:39:265]: Grabbed execution mutex. MSI (s) (3C:20) [10:55:39:265]: Resetting cached policy values MSI (s) (3C:20) [10:55:39:265]: Machine policy value 'Debug' is 0 MSI (s) (3C:20) [10:55:39:265]: ******* RunEngine: ******* Product: e:6771b864b449c707fd961a7fd719a8c1SetupSqlRun_Tools.msi ******* Action: ******* CommandLine: ********** MSI (s) (3C:20) [10:55:39:265]: Machine policy value 'DisableUserInstalls' is 0 MSI (s) (3C:20) [10:55:39:281]: File will have security applied from OpCode. MSI (s) (3C:20) [10:55:45:015]: End dialog not enabled MSI (s) (3C:20) [10:55:45:015]: Original package ==> e:6771b864b449c707fd961a7fd719a8c1SetupSqlRun_Tools.msi MSI (s) (3C:20) [10:55:45:015]: Package we're running from ==> C:WINNTInstaller19c5ce.msi MSI (s) (3C:20) [10:55:45:046]: APPCOMPAT: looking for appcompat database entry with ProductCode '{58D379F7-62BC-4748-8237-FE071ECE797C}'. MSI (s) (3C:20) [10:55:45:046]: APPCOMPAT: no matching ProductCode found in database. MSI (s) (3C:20) [10:55:45:046]: MSCOREE already loaded, using loaded copy MSI (s) (3C:20) [10:55:45:046]: Machine policy value 'TransformsSecure' is 0 MSI (s) (3C:20) [10:55:45:046]: User policy value 'TransformsAtSource' is 0 MSI (s) (3C:20) [10:55:45:046]: Machine policy value 'DisablePatch' is 0 MSI (s) (3C:20) [10:55:45:046]: Machine policy value 'AllowLockdownPatch' is 0 MSI (s) (3C:20) [10:55:45:046]: Machine policy value 'DisableLUAPatching' is 0 MSI (s) (3C:20) [10:55:45:046]: Machine policy value 'DisableFlyWeightPatching' is 0 MSI (s) (3C:20) [10:55:45:046]: APPCOMPAT: looking for appcompat database entry with ProductCode '{58D379F7-62BC-4748-8237-FE071ECE797C}'. MSI (s) (3C:20) [10:55:45:046]: APPCOMPAT: no matching ProductCode found in database. MSI (s) (3C:20) [10:55:45:046]: Transforms are not secure. MSI (s) (3C:20) [10:55:45:046]: Command Line: USERNAME=SomeCompanyName COMPANYNAME=SomeCompanyName INSTALLSQLSHAREDDIR=C:Program FilesMicrosoft SQL Server SAMPLEDATABASESERVER=SomeMachineName STPSETUPTHREADID=1740 STPSETUPPROCESSID=260 EXTERNALCONTROL=1 ADDLOCAL=Client_Components,Connectivity,SDK,SQL_SSMSEE REBOOT=ReallySuppress CURRENTDIRECTORY=C:Program FilesMicrosoft SQL Server90Setup Bootstrap CLIENTUILEVEL=3 CLIENTPROCESSID=260 %HOMEPATH=Documents and SettingsSomeUserName %HOMEDRIVE=D: %HOMESHARE= MSI (s) (3C:20) [10:55:45:046]: PROPERTY CHANGE: Adding PackageCode property. Its value is '{89DAFCFE-ED1B-4EC7-82EE-1D153F4C0980}'. MSI (s) (3C:20) [10:55:45:046]: Product Code passed to Engine.Initialize: '' MSI (s) (3C:20) [10:55:45:046]: Product Code from property table before transforms: '{58D379F7-62BC-4748-8237-FE071ECE797C}' MSI (s) (3C:20) [10:55:45:046]: Product Code from property table after transforms: '{58D379F7-62BC-4748-8237-FE071ECE797C}' MSI (s) (3C:20) [10:55:45:046]: Product not registered: beginning first-time install MSI (s) (3C:20) [10:55:45:046]: PROPERTY CHANGE: Adding ProductState property. Its value is '-1'. MSI (s) (3C:20) [10:55:45:046]: Entering CMsiConfigurationManager::SetLastUsedSource. MSI (s) (3C:20) [10:55:45:046]: User policy value 'SearchOrder' is 'nmu' MSI (s) (3C:20) [10:55:45:046]: Adding new sources is allowed. MSI (s) (3C:20) [10:55:45:046]: PROPERTY CHANGE: Adding PackagecodeChanging property. Its value is '1'. MSI (s) (3C:20) [10:55:45:046]: Package name extracted from package path: 'SqlRun_Tools.msi' MSI (s) (3C:20) [10:55:45:062]: Package to be registered: 'sqlrun_tools.msi' MSI (s) (3C:20) [10:55:45:062]: Note: 1: 2262 2: AdminProperties 3: -2147287038 MSI (s) (3C:20) [10:55:45:062]: Machine policy value 'DisableMsi' is 0 MSI (s) (3C:20) [10:55:45:062]: Machine policy value 'AlwaysInstallElevated' is 0 MSI (s) (3C:20) [10:55:45:062]: User policy value 'AlwaysInstallElevated' is 0 MSI (s) (3C:20) [10:55:45:062]: Product installation will be elevated because user is admin and product is being installed per-machine. MSI (s) (3C:20) [10:55:45:062]: Running product '{58D379F7-62BC-4748-8237-FE071ECE797C}' with elevated privileges: Product is assigned. MSI (s) (3C:20) [10:55:45:062]: PROPERTY CHANGE: Adding USERNAME property. Its value is 'SomeCompanyName'. MSI (s) (3C:20) [10:55:45:062]: PROPERTY CHANGE: Adding COMPANYNAME property. Its value is 'SomeCompanyName'. MSI (s) (3C:20) [10:55:45:062]: PROPERTY CHANGE: Adding INSTALLSQLSHAREDDIR property. Its value is 'C:Program FilesMicrosoft SQL Server'. MSI (s) (3C:20) [10:55:45:062]: PROPERTY CHANGE: Adding SAMPLEDATABASESERVER property. Its value is 'SomeMachineName'. MSI (s) (3C:20) [10:55:45:062]: PROPERTY CHANGE: Adding STPSETUPTHREADID property. Its value is '1740'. MSI (s) (3C:20) [10:55:45:062]: PROPERTY CHANGE: Adding STPSETUPPROCESSID property. Its value is '260'. MSI (s) (3C:20) [10:55:45:062]: PROPERTY CHANGE: Adding EXTERNALCONTROL property. Its value is '1'. MSI (s) (3C:20) [10:55:45:062]: PROPERTY CHANGE: Adding ADDLOCAL property. Its value is 'Client_Components,Connectivity,SDK,SQL_SSMSEE'. MSI (s) (3C:20) [10:55:45:062]: PROPERTY CHANGE: Adding REBOOT property. Its value is 'ReallySuppress'. MSI (s) (3C:20) [10:55:45:062]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'C:Program FilesMicrosoft SQL Server90Setup Bootstrap'. MSI (s) (3C:20) [10:55:45:062]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '3'. MSI (s) (3C:20) [10:55:45:062]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '260'. MSI (s) (3C:20) [10:55:45:062]: TRANSFORMS property is now: MSI (s) (3C:20) [10:55:45:062]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '150'. MSI (s) (3C:20) [10:55:45:062]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNameApplication Data MSI (s) (3C:20) [10:55:45:062]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNameFavorites MSI (s) (3C:20) [10:55:45:062]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNameNetHood MSI (s) (3C:20) [10:55:45:062]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNameMy Documents MSI (s) (3C:20) [10:55:45:062]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNamePrintHood MSI (s) (3C:20) [10:55:45:078]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNameRecent MSI (s) (3C:20) [10:55:45:078]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNameSendTo MSI (s) (3C:20) [10:55:45:078]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNameTemplates MSI (s) (3C:20) [10:55:45:078]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsAll UsersApplication Data MSI (s) (3C:20) [10:55:45:078]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNameLocal SettingsApplication Data MSI (s) (3C:20) [10:55:45:078]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNameMy DocumentsMy Pictures MSI (s) (3C:20) [10:55:45:078]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsAll UsersStart MenuProgramsAdministrative Tools MSI (s) (3C:20) [10:55:45:078]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsAll UsersStart MenuProgramsStartup MSI (s) (3C:20) [10:55:45:078]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsAll UsersStart MenuPrograms MSI (s) (3C:20) [10:55:45:078]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsAll UsersStart Menu MSI (s) (3C:20) [10:55:45:078]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsAll UsersDesktop MSI (s) (3C:20) [10:55:45:078]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNameStart MenuProgramsAdministrative Tools MSI (s) (3C:20) [10:55:45:093]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNameStart MenuProgramsStartup MSI (s) (3C:20) [10:55:45:093]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNameStart MenuPrograms MSI (s) (3C:20) [10:55:45:093]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNameStart Menu MSI (s) (3C:20) [10:55:45:093]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsSomeUserNameDesktop MSI (s) (3C:20) [10:55:45:093]: SHELL32::SHGetFolderPath returned: D:Documents and SettingsAll UsersTemplates MSI (s) (3C:20) [10:55:45:093]: SHELL32::SHGetFolderPath returned: C:WINNTFonts MSI (s) (3C:20) [10:55:45:093]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans Serif 4: 0 5: 16 MSI (s) (3C:20) [10:55:45:093]: PROPERTY CHANGE: Adding Privileged property. Its value is '1'. MSI (s) (3C:20) [10:55:45:093]: PROPERTY CHANGE: Adding DATABASE property. Its value is 'C:WINNTInstaller19c5ce.msi'. MSI (s) (3C:20) [10:55:45:093]: PROPERTY CHANGE: Adding OriginalDatabase property. Its value is 'e:6771b864b449c707fd961a7fd719a8c1SetupSqlRun_Tools.msi'. MSI (s) (3C:20) [10:55:45:093]: Note: 1: 2205 2: 3: PatchPackage MSI (s) (3C:20) [10:55:45:093]: Machine policy value 'DisableRollback' is 0 MSI (s) (3C:20) [10:55:45:093]: User policy value 'DisableRollback' is 0 MSI (s) (3C:20) [10:55:45:093]: PROPERTY CHANGE: Adding UILevel property. Its value is '2'. === Logging started: 4/20/2006 10:55:45 === MSI (s) (3C:20) [10:55:45:093]: PROPERTY CHANGE: Adding Preselected property. Its value is '1'. MSI (s) (3C:20) [10:55:45:093]: PROPERTY CHANGE: Adding ACTION property. Its value is 'INSTALL'. MSI (s) (3C:20) [10:55:45:093]: Doing action: INSTALL MSI (s) (3C:20) [10:55:45:109]: Running ExecuteSequence MSI (s) (3C:20) [10:55:45:109]: Doing action: SystemFolder.60A85CA1_D9D8_43FA_9DD5_574BEF970F9F Action start 10:55:45: INSTALL. MSI (s) (3C:20) [10:55:45:109]: PROPERTY CHANGE: Adding SystemFolder.60A85CA1_D9D8_43FA_9DD5_574BEF970F9F property. Its value is 'C:WINNTsystem32'. Action start 10:55:45: SystemFolder.60A85CA1_D9D8_43FA_9DD5_574BEF970F9F. MSI (s) (3C:20) [10:55:45:109]: Doing action: WindowsFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E Action ended 10:55:45: SystemFolder.60A85CA1_D9D8_43FA_9DD5_574BEF970F9F. Return value 1. MSI (s) (3C:20) [10:55:45:109]: PROPERTY CHANGE: Adding WindowsFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNT'. Action start 10:55:45: WindowsFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E. MSI (s) (3C:20) [10:55:45:109]: Doing action: SystemFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E Action ended 10:55:45: WindowsFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E. Return value 1. MSI (s) (3C:20) [10:55:45:109]: PROPERTY CHANGE: Adding SystemFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNTsystem32'. Action start 10:55:45: SystemFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E. MSI (s) (3C:20) [10:55:45:109]: Doing action: WindowsFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E Action ended 10:55:45: SystemFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E. Return value 1. MSI (s) (3C:20) [10:55:45:109]: PROPERTY CHANGE: Adding WindowsFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNT'. Action start 10:55:45: WindowsFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E. MSI (s) (3C:20) [10:55:45:109]: Doing action: SystemFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E Action ended 10:55:45: WindowsFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E. Return value 1. MSI (s) (3C:20) [10:55:45:109]: PROPERTY CHANGE: Adding SystemFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNTsystem32'. Action start 10:55:45: SystemFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E. MSI (s) (3C:20) [10:55:45:125]: Doing action: WindowsFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E Action ended 10:55:45: SystemFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E. Return value 1. MSI (s) (3C:20) [10:55:45:125]: PROPERTY CHANGE: Adding WindowsFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNT'. Action start 10:55:45: WindowsFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E. MSI (s) (3C:20) [10:55:45:125]: Doing action: SystemFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E Action ended 10:55:45: WindowsFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E. Return value 1. MSI (s) (3C:20) [10:55:45:125]: PROPERTY CHANGE: Adding SystemFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNTsystem32'. Action start 10:55:45: SystemFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E. MSI (s) (3C:20) [10:55:45:125]: Doing action: WindowsFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E Action ended 10:55:45: SystemFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E. Return value 1. MSI (s) (3C:20) [10:55:45:125]: PROPERTY CHANGE: Adding WindowsFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNT'. Action start 10:55:45: WindowsFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E. MSI (s) (3C:20) [10:55:45:125]: Doing action: SystemFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E Action ended 10:55:45: WindowsFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E. Return value 1. MSI (s) (3C:20) [10:55:45:125]: PROPERTY CHANGE: Adding SystemFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNTsystem32'. Action start 10:55:45: SystemFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E. MSI (s) (3C:20) [10:55:45:125]: Doing action: WindowsFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E Action ended 10:55:45: SystemFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E. Return value 1. MSI (s) (3C:20) [10:55:45:125]: PROPERTY CHANGE: Adding WindowsFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNT'. Action start 10:55:45: WindowsFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E. MSI (s) (3C:20) [10:55:45:140]: Doing action: SystemFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E Action ended 10:55:45: WindowsFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E. Return value 1. MSI (s) (3C:20) [10:55:45:140]: PROPERTY CHANGE: Adding SystemFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNTsystem32'. Action start 10:55:45: SystemFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E. MSI (s) (3C:20) [10:55:45:140]: Doing action: WindowsFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E Action ended 10:55:45: SystemFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E. Return value 1. MSI (s) (3C:20) [10:55:45:140]: PROPERTY CHANGE: Adding WindowsFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNT'. Action start 10:55:45: WindowsFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E. MSI (s) (3C:20) [10:55:45:140]: Doing action: SystemFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E Action ended 10:55:45: WindowsFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E. Return value 1. MSI (s) (3C:20) [10:55:45:140]: PROPERTY CHANGE: Adding SystemFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNTsystem32'. Action start 10:55:45: SystemFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E. MSI (s) (3C:20) [10:55:45:140]: Doing action: WindowsFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E Action ended 10:55:45: SystemFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E. Return value 1. MSI (s) (3C:20) [10:55:45:140]: PROPERTY CHANGE: Adding WindowsFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNT'. Action start 10:55:45: WindowsFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E. MSI (s) (3C:20) [10:55:45:140]: Doing action: SystemFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E Action ended 10:55:45: WindowsFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E. Return value 1. MSI (s) (3C:20) [10:55:45:140]: PROPERTY CHANGE: Adding SystemFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNTsystem32'. Action start 10:55:45: SystemFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E. MSI (s) (3C:20) [10:55:45:156]: Doing action: WindowsFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E Action ended 10:55:45: SystemFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E. Return value 1. MSI (s) (3C:20) [10:55:45:156]: PROPERTY CHANGE: Adding WindowsFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNT'. Action start 10:55:45: WindowsFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E. MSI (s) (3C:20) [10:55:45:156]: Doing action: SystemFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E Action ended 10:55:45: WindowsFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E. Return value 1. MSI (s) (3C:20) [10:55:45:156]: PROPERTY CHANGE: Adding SystemFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E property. Its value is 'C:WINNTsystem32'. Action start 10:55:45: SystemFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E. MSI (s) (3C:20) [10:55:45:156]: Doing action: ProgramMenuFolder.ConfigurationTools1033 Action ended 10:55:45: SystemFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E. Return value 1. MSI (s) (3C:20) [10:55:45:156]: PROPERTY CHANGE: Adding ProgramMenuFolder.ConfigurationTools1033 property. Its value is 'D:Documents and SettingsAll UsersStart MenuPrograms'. Action start 10:55:45: ProgramMenuFolder.ConfigurationTools1033. MSI (s) (3C:20) [10:55:45:156]: Doing action: ProgramFilesFolder.D20239D7_E87C_40C9_9837_E70B8D4882C2 Action ended 10:55:45: ProgramMenuFolder.ConfigurationTools1033. Return value 1. MSI (s) (3C:20) [10:55:45:156]: PROPERTY CHANGE: Adding ProgramFilesFolder.D20239D7_E87C_40C9_9837_E70B8D4882C2 property. Its value is 'C:Program Files'. Action start 10:55:45: ProgramFilesFolder.D20239D7_E87C_40C9_9837_E70B8D4882C2. MSI (s) (3C:20) [10:55:45:156]: Skipping action: SetMDACSxS (condition is false) MSI (s) (3C:20) [10:55:45:156]: Doing action: LaunchConditions Action ended 10:55:45: ProgramFilesFolder.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1. MSI (s) (3C:20) [10:55:45:156]: Note: 1: 2205 2: 3: LaunchCondition MSI (s) (3C:20) [10:55:45:156]: Note: 1: 2228 2: 3: LaunchCondition 4: SELECT `Condition`, `Description` FROM `LaunchCondition` Action start 10:55:45: LaunchConditions. MSI (s) (3C:20) [10:55:45:156]: Doing action: StreamSupportFiles.D20239D7_E87C_40C9_9837_E70B8D4882C2 Action ended 10:55:45: LaunchConditions. Return value 0. MSI (s) (3C:BC) [10:55:45:171]: Invoking remote custom action. DLL: C:WINNTInstallerMSI299.tmp, Entrypoint: StreamSupportFiles MSI (s) (3C:D0) [10:55:45:171]: Generating random cookie. MSI (s) (3C:D0) [10:55:45:171]: Created Custom Action Server with PID 616 (0x268). MSI (s) (3C:70) [10:55:45:187]: Running as a service. MSI (s) (3C:70) [10:55:45:187]: Hello, I'm your 32bit Impersonated custom action server. Action start 10:55:45: StreamSupportFiles.D20239D7_E87C_40C9_9837_E70B8D4882C2. Property(SQL): Setup Bootstrap Directory = C:Program FilesMicrosoft SQL Server90Setup Bootstrap 1: 0 2: Iterating through _sqlSupportFiles entries Streamed sqlca.D20239D7_E87C_40C9_9837_E70B8D4882C2 to C:Program FilesMicrosoft SQL Server90Setup Bootstrapin{58D379F7-62BC-4748-8237-FE071ECE797C}sqlca.dll MSI (s) (3C:20) [10:55:45:312]: Doing action: Do_LogInstallStart.D20239D7_E87C_40C9_9837_E70B8D4882C2 Action ended 10:55:45: StreamSupportFiles.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1. MSI (s) (3C:BC) [10:55:45:328]: Invoking remote custom action. DLL: C:WINNTInstallerMSI29A.tmp, Entrypoint: Do_LogInstallStart Action start 10:55:45: Do_LogInstallStart.D20239D7_E87C_40C9_9837_E70B8D4882C2. Property(SQL): Setup Bootstrap Directory = C:Program FilesMicrosoft SQL Server90Setup Bootstrap Property(SQL): CA DLL Path = C:Program FilesMicrosoft SQL Server90Setup BootstrapBin{58D379F7-62BC-4748-8237-FE071ECE797C}sqlca.dll <Func Name='LaunchFunction'> Function=Do_LogInstallStart <Func Name='SetCAContext'> <EndFunc Name='SetCAContext' Return='T' GetLastError='203'> Doing Action: Do_LogInstallStart PerfTime Start: Do_LogInstallStart : Thu Apr 20 10:55:46 2006 <Func Name='Do_LogInstallStart'> <EndFunc Name='Do_LogInstallStart' Return='0' GetLastError='203'> PerfTime Stop: Do_LogInstallStart : Thu Apr 20 10:55:46 2006 <EndFunc Name='LaunchFunction' Return='0' GetLastError='203'> MSI (s) (3C:20) [10:55:46:625]: Doing action: GetDefaultDomain.D20239D7_E87C_40C9_9837_E70B8D4882C2 Action ended 10:55:46: Do_LogInstallStart.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1. MSI (s) (3C:BC) [10:55:46:625]: Invoking remote custom action. DLL: C:WINNTInstallerMSI29B.tmp, Entrypoint: GetDefaultDomain Action start 10:55:46: GetDefaultDomain.D20239D7_E87C_40C9_9837_E70B8D4882C2. <Func Name='LaunchFunction'> Function=GetDefaultDomain <Func Name='SetCAContext'> <EndFunc Name='SetCAContext' Return='T' GetLastError='203'> Doing Action: GetDefaultDomain PerfTime Start: GetDefaultDomain : Thu Apr 20 10:55:46 2006 <Func Name='GetDefaultDomain'> MSI (s) (3C!38) [10:55:46:687]: PROPERTY CHANGE: Adding DefaultDomain property. Its value is 'SomeDomainName'. MSI (s) (3C!38) [10:55:46:687]: PROPERTY CHANGE: Adding QuotedDefaultDomain property. Its value is 'SomeDomainName'. MSI (s) (3C!38) [10:55:46:687]: PROPERTY CHANGE: Adding QuotedComputerName property. Its value is 'SomeMachineName'. PerfTime Stop: GetDefaultDomain : Thu Apr 20 10:55:46 2006 <EndFunc Name='LaunchFunction' Return='0' GetLastError='997'> MSI (s) (3C:20) [10:55:46:687]: Doing action: RestoreSetupParams.D20239D7_E87C_40C9_9837_E70B8D4882C2 Action ended 10:55:46: GetDefaultDomain.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1. MSI (s) (3C:BC) [10:55:46:687]: Invoking remote custom action. DLL: C:WINNTInstallerMSI29C.tmp, Entrypoint: RestoreSetupParams Action start 10:55:46: RestoreSetupParams.D20239D7_E87C_40C9_9837_E70B8D4882C2. <Func Name='LaunchFunction'> Function=RestoreSetupParams Skipping Action: RestoreSetupParams (Condition is false) <EndFunc Name='LaunchFunction' Return='0' GetLastError='203'> MSI (s) (3C:20) [10:55:46:718]: Doing action: ShutdownServiceManager.D20239D7_E87C_40C9_9837_E70B8D4882C2 Action ended 10:55:46: RestoreSetupParams.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1. MSI (s) (3C:BC) [10:55:46:718]: Invoking remote custom action. DLL: C:WINNTInstallerMSI29D.tmp, Entrypoint: ShutdownServiceManager Action start 10:55:46: ShutdownServiceManager.D20239D7_E87C_40C9_9837_E70B8D4882C2. <Func Name='LaunchFunction'> Function=ShutdownServiceManager <Func Name='SetCAContext'> <EndFunc Name='SetCAContext' Return='T' GetLastError='203'> Doing Action: ShutdownServiceManager PerfTime Start: ShutdownServiceManager : Thu Apr 20 10:55:46 2006 <Func Name='ShutdownServiceManager'> <EndFunc Name='ShutdownServiceManager' Return='0' GetLastError='2'> PerfTime Stop: ShutdownServiceManager : Thu Apr 20 10:55:46 2006 <EndFunc Name='LaunchFunction' Return='0' GetLastError='2'> MSI (s) (3C:20) [10:55:46:750]: Doing action: Write_sqlWellKnownAccountNames.D20239D7_E87C_40C9_9837_E70B8D4882C2 Action ended 10:55:46: ShutdownServiceManager.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1. MSI (s) (3C:BC) [10:55:46:765]: Invoking remote custom action. DLL: C:WINNTInstallerMSI29E.tmp, Entrypoint: Write_sqlWellKnownAccountNames Action start 10:55:46: Write_sqlWellKnownAccountNames.D20239D7_E87C_40C9_9837_E70B8D4882C2. <Func Name='LaunchFunction'> Function=Write_sqlWellKnownAccountNames <Func Name='SetCAContext'> <EndFunc Name='SetCAContext' Return='T' GetLastError='203'> Doing Action: Write_sqlWellKnownAccountNames PerfTime Start: Write_sqlWellKnownAccountNames : Thu Apr 20 10:55:46 2006 <Func Name='Write_sqlWellKnownAccountNames'> MSI (s) (3C!38) [10:55:46:781]: PROPERTY CHANGE: Adding AdministratorsGroup property. Its value is 'BUILTINAdministrators'. MSI (s) (3C!38) [10:55:46:796]: PROPERTY CHANGE: Adding UsersGroup property. Its value is 'BUILTINUsers'. MSI (s) (3C!38) [10:55:46:812]: PROPERTY CHANGE: Adding LocalSystemAccount property. Its value is 'NT AUTHORITYSYSTEM'. <EndFunc Name='Write_sqlWellKnownAccountNames' Return='0' GetLastError='1332'> PerfTime Stop: Write_sqlWellKnownAccountNames : Thu Apr 20 10:55:46 2006 <EndFunc Name='LaunchFunction' Return='0' GetLastError='1332'> MSI (s) (3C:20) [10:55:46:843]: Skipping action: PropSetSQLAutoStart.D20239D7_E87C_40C9_9837_E70B8D4882C2 (condition is false) MSI (s) (3C:20) [10:55:46:843]: Doing action: CheckIIS.D20239D7_E87C_40C9_9837_E70B8D4882C2 Action ended 10:55:46: Write_sqlWellKnownAccountNames.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1. MSI (s) (3C:BC) [10:55:46:843]: Invoking remote custom action. DLL: C:WINNTInstallerMSI29F.tmp, Entrypoint: CheckIIS Action start 10:55:46: CheckIIS.D20239D7_E87C_40C9_9837_E70B8D4882C2. <Func Name='LaunchFunction'> Function=CheckIIS <Func Name='SetCAContext'> <EndFunc Name='SetCAContext' Return='T' GetLastError='203'> Doing Action: CheckIIS PerfTime Start: CheckIIS : Thu Apr 20 10:55:46 2006 <Func Name='CheckIIS'> MSI (s) (3C!38) [10:55:46:906]: PROPERTY CHANGE: Adding IISCHECKED property. Its value is '0'. MSI (s) (3C!38) [10:55:46:921]: PROPERTY CHANGE: Adding SqlASPNETInstalled property. Its value is '1'. Skipping RS Feature Dependency Check <Func Name='GetXMLAttributeValue'> Error to find XML node /configuration/system.web/compilation <EndFunc Name='GetXMLAttributeValue' Return='2' GetLastError='0'> Failed to get ModuleID_RS_Server when getting the ASP Temp directory. MSI (s) (3C!38) [10:55:47:031]: PROPERTY CHANGE: Adding SqlCOMPlusInstalled property. Its value is '1'. Could not get the ASP temp directory. MSI (s) (3C!38) [10:55:47:031]: PROPERTY CHANGE: Adding RSPREREQUISITECHECKED property. Its value is '1'. MSI (s) (3C!38) [10:55:47:031]: PROPERTY CHANGE: Modifying IISCHECKED property. Its current value is '0'. Its new value: '1'. SqlCOMPlusInstalled value set to 1 <EndFunc Name='CheckIIS' Return='0' GetLastError='0'> PerfTime Stop: CheckIIS : Thu Apr 20 10:55:47 2006 <EndFunc Name='LaunchFunction' Return='0' GetLastError='0'> MSI (s) (3C:20) [10:55:47:031]: Doing action: Create_RSGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2 Action ended 10:55:47: CheckIIS.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1. MSI (s) (3C:BC) [10:55:47:046]: Invoking remote custom action. DLL: C:WINNTInstallerMSI2A0.tmp, Entrypoint: Create_RSGUID Action start 10:55:47: Create_RSGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2. <Func Name='LaunchFunction'> Function=Create_RSGUID <Func Name='SetCAContext'> <EndFunc Name='SetCAContext' Return='T' GetLastError='203'> Doing Action: Create_RSGUID PerfTime Start: Create_RSGUID : Thu Apr 20 10:55:47 2006 <Func Name='Create_RSGUID'> MSI (s) (3C!38) [10:55:47:156]: PROPERTY CHANGE: Adding RSGUIDVALUE property. Its value is '{91051fc0-581b-4a79-8672-9ae717477574}'. Starting Create_RSGUID Created new GUID: {91051fc0-581b-4a79-8672-9ae717477574} <EndFunc Name='Create_RSGUID' Return='0' GetLastError='0'> PerfTime Stop: Create_RSGUID : Thu Apr 20 10:55:47 2006 <EndFunc Name='LaunchFunction' Return='0' GetLastError='0'> MSI (s) (3C:20) [10:55:47:171]: Doing action: CheckPassedPropertiesLength.D20239D7_E87C_40C9_9837_E70B8D4882C2 Action ended 10:55:47: Create_RSGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1. MSI (s) (3C:BC) [10:55:47:171]: Invoking remote custom action. DLL: C:WINNTInstallerMSI2A1.tmp, Entrypoint: CheckPassedPropertiesLength Action start 10:55:47: CheckPassedPropertiesLength.D20239D7_E87C_40C9_9837_E70B8D4882C2. <Func Name='LaunchFunction'> Function=CheckPassedPropertiesLength <Func Name='SetCAContext'> <EndFunc Name='SetCAContext' Return='T' GetLastError='203'> Doing Action: CheckPassedPropertiesLength PerfTime Start: CheckPassedPropertiesLength : Thu Apr 20 10:55:47 2006 <Func Name='CheckPassedPropertiesLength'> CheckPassedPropertiesLength: Property USERNAME is of legal length. MSI (s) (3C!38) [10:55:47:203]: PROPERTY CHANGE: Adding RSSqlPoolLimit property. Its value is '100'. CheckPassedPropertiesLength: Property COMPANYNAME is of legal length. <EndFunc Name='CheckPassedPropertiesLength' Return='0' GetLastError='0'> PerfTime Stop: CheckPassedPropertiesLength : Thu Apr 20 10:55:47 2006 <EndFunc Name='LaunchFunction' Return='0' GetLastError='0'> MSI (s) (3C:20) [10:55:47:203]: Skipping action: CheckForGDRPatch.D20239D7_E87C_40C9_9837_E70B8D4882C2 (condition is false) MSI (s) (3C:20) [10:55:47:203]: Doing action: FindRelatedProducts Action ended 10:55:47: CheckPassedPropertiesLength.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1. Action start 10:55:47: FindRelatedProducts. MSI (s) (3C:20) [10:55:47:218]: PROPERTY CHANGE: Adding UPGRADETOOLS90 property. Its value is '{A30965BD-2D4D-45CE-8F04-6A6889818CF1}'. MSI (s) (3C:20) [10:55:47:218]: PROPERTY CHANGE: Adding PRODUCT_TOOLS property. Its value is '{A30965BD-2D4D-45CE-8F04-6A6889818CF1}'. MSI (s) (3C:20) [10:55:47:218]: Doing action: FindUpgradeableProduct Action ended 10:55:47: FindRelatedProducts. Return value 1. MSI (s) (3C:BC) [10:55:47:218]: Invoking remote custom action. DLL: C:WINNTInstallerMSI2A2.tmp, Entrypoint: FindUpgradeableProduct Action start 10:55:47: FindUpgradeableProduct. <Func Name='LaunchFunction'> Function=FindUpgradeableProduct <Func Name='SetCAContext'> <EndFunc Name='SetCAContext' Return='T' GetLastError='203'> Doing Action: FindUpgradeableProduct PerfTime Start: FindUpgradeableProduct : Thu Apr 20 10:55:47 2006 <Func Name='FindUpgradeableProduct'> Warning 28123.Warning: SQL Server Setup cannot install this feature because a different edition of this feature is already installed. For more information, see 'Version and Edition Upgrades' in SQL Server Books Online. <EndFunc Name='FindUpgradeableProduct' Return='259' GetLastError='0'> PerfTime Stop: FindUpgradeableProduct : Thu Apr 20 11:08:55 2006 Gathering darwin properties for failure handling. Loaded DLL: C:Program FilesMicrosoft SQL Server90Setup Bootstrapxmlrw.dll Version: 2.0.3609.0
<EndFunc Name='LaunchFunction' Return='259' GetLastError='0'> Action ended 11:08:55: FindUpgradeableProduct. Return value 5. Action ended 11:08:55: INSTALL. Return value 1. Property(S): ProductCode = {58D379F7-62BC-4748-8237-FE071ECE797C} Property(S): ProductLanguage = 1033 Property(S): Manufacturer = Microsoft Corporation Property(S): ProductVersion = 9.1.2047.00 Property(S): MEDIAPACKAGEPATH = Setup Property(S): ALLUSERS = 1 Property(S): NULLGUID = {00000000-0000-0000-0000-000000000000} Property(S): ASPNetVersion = 2.0.50727 Property(S): ARPHELPLINK = http://go.microsoft.com/fwlink/?LinkId=52152 Property(S): ARPPRODUCTICON = ARPIcon.ico Property(S): ARPNOREPAIR = 1 Property(S): ARPSYSTEMCOMPONENT = 1 Property(S): MsiHiddenProperties = SQLPASSWORD;AGTPASSWORD;ASPASSWORD;RSPASSWORD;SQLBROWSERPASSWORD;RSSQLPASSWORD;RSSQLPassword;RSSQLPasswordQuoted;RSSETUPPASSWORD;RSSetupPassword;SAPWD;saPWD;UPGRADEPWD;SqlUpgradePwd;SQLPassword;ServicePassword;ADMINPASSWORD;PIDKEY;FTEPassword.68C6D15C_77E0_11D5_8528_00C04F68155C;checksum.7354AFCB_913B_4E9F_B76C_2376101FDE0C;checksum.;DigitalProductID;DPID;Do_sqlScript.D20239D7_E87C_40C9_9837_E70B8D4882C2;Rollback_SqlConnection.D20239D7_E87C_40C9_9837_E70B8D4882C2;Do_XmlSingleNode.D20239D7_E87C_40C9_9837_E70B8D4882C2;Do_RSSetting.D20239D7_E87C_40C9_9837_E70B8D4882C2;PID;ProductID;RSUPGRADEPASSWORD;Do_RSSetSharePointExclusionPath.D20239D7_E87C_40C9_9837_E70B8D4882C2 Property(S): SecureCustomProperties = SQL_SHOWLIC;PRODUCT_TOOLS;UPGRADETOOLS90;PRODUCT_TOOLS_LCID Property(S): SqlServerBuild = 1 Property(S): SqlCluster = 0 Property(S): INSTALLLEVEL = 90 Property(S): FXAssemblyVersion = 2.0.0.0 Property(S): VSAssemblyVersion = 8.0.0.0 Property(S): SqlErrorReporting = #0 Property(S): SqlSqmReporting = #0 Property(S): SqlEnableRanu = 0 Property(S): SqlPatchLevel = 9.1.2047 Property(S): ReleaseProductVersion = 9.00.2047.00 Property(S): SpLevel = 1 Property(S): PIDTemplate = <````=````=````=````=`````>@@@@@ Property(S): UPGRADETOOLS90 = {A30965BD-2D4D-45CE-8F04-6A6889818CF1} Property(S): UpgradeCode = {FED8B2D9-159B-41B0-826C-E3E0F8ADE264} Property(S): PRODUCT_TOOLS = {A30965BD-2D4D-45CE-8F04-6A6889818CF1} Property(S): BOL_INSTALL = SQLServer90 Property(S): ProgramFilesFolder = C:Program Files Property(S): DefaultUIFont = Tahoma8 Property(S): VersionNT = 500 Property(S): INSTALLSQLSHAREDDIR = C:Program FilesMicrosoft SQL Server Property(S): LocalSystemAccount = NT AUTHORITYSYSTEM Property(S): DefaultBuiltInAccount = NetworkServiceAccount Property(S): SqlDisableNetworkProtocols = 1 Property(S): SimpleFeatureTitle_Feat6 = Client Components Property(S): SimpleFeature_Feat6_Expr = &Workstation components and development tools Property(S): Service_AGT = SQL Server Agent Property(S): Service_OLAP = SQL Server Analysis Services Property(S): Service_SQL = SQL Server Property(S): Service_RS = SQL Server Reporting Services Property(S): Service_Browse = SQL Server Browser Property(S): Service_DTS = SQL Server Integration Services Property(S): Service_ADHelper = SQL Server Active Directory Helper Property(S): Service_SQLWriter = SQL Server VSS Writer Property(S): Service_FTS = SQL Server FullText Search Property(S): ServiceDesc_RS = Manages, executes, renders, schedules and delivers reports. Property(S): ServiceDesc_AGT = Executes jobs, monitors SQL Server, and fires alerts, and allows automation of some administrative tasks. Property(S): ServiceDesc_SQL = Provides storage, processing and controlled access of data and rapid transaction processing. Property(S): ServiceDesc_Browse = Provides SQL Server connection information to client computers. Property(S): ServiceDesc_OLAP = Supplies online analytical processing (OLAP) and data mining functionality for business intelligence applications. Property(S): ServiceDesc_DTS = Provides management support for SSIS package storage and execution. Property(S): ServiceDesc_ADHelper = Enables integration with Active Directories. Property(S): ServiceDesc_SQLWriter = Provides the interface to backup/restore Microsoft SQL server through the Windows VSS infrastructure. Property(S): ServiceDesc_FTS = Quickly creates full-text indexes on content and properties of structured and semi-structured data to allow fast linguistic searches on this data. Property(S): ServiceGroupDesc_ADHelper = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Active Directory Helper in SQL Server 2005. Property(S): ServiceGroupDesc_AGT = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Agent in SQL Server 2005. Property(S): ServiceGroupDesc_OLAP = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Analysis Services in SQL Server 2005. Property(S): ServiceGroupDesc_Browse = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Browser in SQL Server 2005. Property(S): ServiceGroupDesc_DTS = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Integration Services in SQL Server 2005. Property(S): ServiceGroupDesc_FTS = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server and SQL Server FullText Search in SQL Server 2005. Property(S): ServiceGroupDesc_NS = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Notification Services in SQL Server 2005. Property(S): ServiceGroupDesc_RS = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Reporting Services in SQL Server 2005. Property(S): ServiceGroupDesc_RSWeb = Members in the group have the required access to be assigned as the log on account for the associated instance of SQL Server Reporting Services in SQL Server 2005 Property(S): ServiceGroupDesc_SQL = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server and SQL Server FullText Search in SQL Server 2005. Property(S): ServiceGroupDesc_SQL_NEW = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server in SQL Server 2005. Property(S): ServiceGroupDesc_FTS_NEW = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Full Text Search in SQL Server 2005. Property(S): DlgService_AGT = SQL Server Agent Property(S): DlgService_OLAP = Analysis Services Property(S): DlgService_SQL = SQL Server Property(S): DlgService_RS = Reporting Services Property(S): DlgService_Browse = SQL Browser Property(S): AutoStart_AGT = SQL Server A&gent Property(S): AutoStart_OLAP = &Analysis Services Property(S): AutoStart_SQL = &SQL Server Property(S): AutoStart_RS = Rep&orting Services Property(S): AutoStart_Browse = SQL Bro&wser Property(S): AutoStart_FTS = SQL Server &FullText Search Property(S): _AuthenticationType = Windows Property(S): SQL_rgCollation = 1 Property(S): OLAP_rgCollation = 0 Property(S): _InstanceType = Default Property(S): _LicensingMode = PerSeat Property(S): AGTLogin = DomainAccount Property(S): ASLogin = DomainAccount Property(S): SingleLogin = DomainAccount Property(S): SQLLogin = DomainAccount Property(S): RSLogin = DomainAccount Property(S): SQLBROWSERLogin = DomainAccount Property(S): _UpgradeLogon = Windows Property(S): _SampleDBMode = InstallSD Property(S): ButtonTextStyle = {ButtonTextStyle} Property(S): DlgTextStyle = {DlgTextStyle} Property(S): DlgTextStyleB = {DlgTextStyleB} Property(S): DlgTitleStyle = {DlgTitleStyle} Property(S): DlgTitleStyleB = {DlgTitleStyleB} Property(S): FixedStyle = {FixedStyle} Property(S): T_DataFree = T_DataFree Property(S): T_DataReq = T_DataReq Property(S): T_ProgramFree = T_ProgramFree Property(S): T_ProgramReq = T_ProgramReq Property(S): T_IPVal = T_IPVal Property(S): T_Subnet = T_Subnet Property(S): ErrorDialog = ErrorDlg Property(S): ENABLERANU = 1 Property(S): AccountForAllNodesDlg_Desc = Account for remote setup. Property(S): AccountForAllNodesDlg_Text = Enter a user name and password that is a valid administrator account for all nodes in the cluster system. This will be used during setup only. Property(S): AccountForAllNodesDlg_Title = Remote Account Information Property(S): Authentication_ConfirmPWText = Confirm &password: Property(S): Authentication_DlgDesc = The authentication mode specifies the security used when connecting to SQL Server. Property(S): Authentication_DlgText = Select the authentication mode to use for this installation. Property(S): Authentication_DlgTitle = Authentication Mode Property(S): Authentication_EnterPWText = &Enter password: Property(S): Authentication_saPasswordText = Specify the sa logon password below: Property(S): Authentication_SQL = &Mixed Mode (Windows Authentication and SQL Server Authentication) Property(S): Authentication_Windows = &Windows Authentication Mode Property(S): BrowseFolder_ComboText = &Install in: Property(S): BrowseFolder_DlgDesc = You can select a different folder for installation. Property(S): BrowseFolder_DlgTitle = Change Folders Property(S): BrowseFolder_TailText = Installation &path: Property(S): BrowseFolder_TailTextShared = The SQL Server shared path has already been configured. Property(S): ButtonText_Abort = &Abort Property(S): ButtonText_Add = &Add Property(S): ButtonText_Back = < &Back Property(S): ButtonText_Browse = B&rowse... Property(S): ButtonText_Cancel = Cancel Property(S): ButtonText_Close = &Close Property(S): ButtonText_Complete = &Complete Property(S): ButtonText_ContinueLater = &Continue Later Property(S): ButtonText_DiskCost = &Disk Cost... Property(S): ButtonText_Exit = &Exit Property(S): ButtonText_Finish = &Finish Property(S): ButtonText_Help = &Help Property(S): ButtonText_Ignore = &Ignore Property(S): ButtonText_Install = &Install Property(S): ButtonText_Minimal = &Minimal Property(S): ButtonText_New = &New Property(S): ButtonText_Next = &Next > Property(S): ButtonText_No = &No Property(S): ButtonText_Normal = &Normal Property(S): ButtonText_OK = OK Property(S): ButtonText_Open = &Open Property(S): ButtonText_Reinstall = &Reinstall Property(S): ButtonText_ReinstallMode = &Select the reinstall mode Property(S): ButtonText_Remove = &Remove Property(S): ButtonText_Remove2 = &Remove Property(S): ButtonText_Report = &Report Property(S): ButtonText_Reset = &Reset Property(S): ButtonText_Restore = &Restore Property(S): ButtonText_Resume = &Resume Property(S): ButtonText_Retry = &Retry Property(S): ButtonText_Up = &Up Property(S): ButtonText_Yes = &Yes Property(S): Cancel_DlgDesc = Are you sure you want to cancel the installation? Property(S): Cancel_DlgText = The installation is not complete. If you exit the wizard now, Microsoft SQL Server will not be installed. Property(S): ClusterGroup_DlgDesc = Select the cluster group where the virtual server resources will be installed. Property(S): ClusterGroup_DlgStaticTextAvailable = Available cluster groups: Property(S): ClusterGroup_DlgStaticTextUnavailable = Unavailable cluster groups: Property(S): ClusterGroup_DlgTitle = Cluster Group Selection Property(S): ClusterNodeDlg_ButtonTextAdd = &Add -> Property(S): ClusterNodeDlg_ButtonTextRemove = <- &Remove Property(S): ClusterNodeDlg_StaticTextAvailableNode = Available nodes: Property(S): ClusterNodeDlg_StaticTextRequiredNode = Required node: Property(S): ClusterNodeDlg_StaticTextSelectedNode = Selected nodes: Property(S): ClusterNodeDlg_StaticTextUnavailableNode = Unavailable nodes: Property(S): ClusterNodeDlg_Text = Select the nodes to include in the virtual server. Property(S): ClusterNodeDlg_Title = Cluster Node Configuration Property(S): Collation_Service = S&ervice: Property(S): Collation_Service1 = Collation settings for service: Property(S): Collation_AS_Collation = Analysis Services Collation: Property(S): Collation_ChkBinary = Binary Property(S): Collation_ChkBinary2 = Binary - code point Property(S): Collation_ChkCase = Case - sensitive Property(S): Collation_ChkAccent = Accent - sensitive Property(S): Collation_ChkKana = Kana - sensitive Property(S): Collation_ChkWidth = Width - sensitive Property(S): Collation_Designator = Collation &designator and sort order: Property(S): Collation_DlgDesc = Collation settings define the sorting behavior for your server. Property(S): Collation_DlgCusomizeText = &Customize for each service account Property(S): Collation_DlgTitle = Collation Settings Property(S): Collation_SQL = &SQL collations (used for compatibility with previous versions of SQL Server) Property(S): DiskPrompt = Please insert next disk Property(S): DiskSpace_DlgDesc = Disk space required for the installation exceeds available disk space. Property(S): DiskSpace_DlgDesc1 = The available disk space and the space required for installation are shown below. Property(S): DiskSpace_DlgText = The highlighted volumes, if any, do not have enough disk space available for the currently selected features. Click Disk Cleanup to free disk space and then click Resume to continue the installation, or click Exit to exit the wizard. Property(S): DiskSpace_DlgTitle = Out of Disk Space Property(S): DiskSpace_DlgTitle1 = Disk Cost Property(S): DiskSpace_LBDiskCleanup = Use disk cleanup to free more disk space by removing unneeded files. Property(S): REASON_ADMIN_DISABLED = Administrative shares must be enabled in order to let Setup access remote nodes Property(S): REASON_DARWIN_VER = Windows installer is not present or has not the required version Property(S): REASON_DUP_INSTANCE_NAME_CLST = An instance with the same name is already installed in one or more nodes of the cluster. Property(S): REASON_GROUP_HOSTS_VS = Already contains a SQL Virtual Server Property(S): REASON_GROUP_NO_DISK = Does not contain any valid cluster disk Property(S): ERROR_INVALID_PID = This is an invalid Product Key value. Please check the number located on your Product Key sticker. Property(S): ERROR_INVALID_USERNAME = The Name is required for the installation. Property(S): REASON_NODE_DOWN = The node is down or unavailable Property(S): REASON_NOT_KNOWN = Unknown Property(S): REASON_PENDING_REBOOT = The node must be rebooted before running setup Property(S): REASON_SCC_CHECK_FAILED = A SCC check failed on the node Property(S): ERROR_UNKNOWN = Installation error. Install it by running setup.exe. Property(S): REASON_VERSION_ADDNODE = Adding nodes to the Virtual Server definition using a newer version of Setup is not allowed. Property(S): REASON_OS_VER = SQL Server requires Windows 2000 Service Pack 4, or Windows XP Service Pack 1 or later for installation. Property(S): REASON_OS_TYPE = This version of SQL Server is not supported on this version of Windows. Property(S): Exit_DlgDesc1 = Setup has installed Microsoft SQL Server successfully. Click Finish to exit. Property(S): Exit_DlgDesc2 = Setup has removed Microsoft SQL Server successfully. Click Finish to exit. Property(S): Exit_DlgDesc3 = Setup has updated Microsoft SQL Server successfully. Click Finish to exit. Property(S): Exit_DlgDesc4 = Setup has reinstalled Microsoft SQL Server successfully. Click Finish to exit. Property(S): Exit_DlgDesc5 = Setup has upgraded Microsoft SQL Server successfully. Click Finish to exit. Property(S): Exit_DlgTitle = Completing Microsoft SQL Server Setup Property(S): SimpleFeature_DlgDesc = Select the components to install or upgrade. Property(S): SimpleFeature_DlgTitle = Components to Install Property(S): SimpleFeature_Feat1 = &SQL Server Database Services Property(S): SimpleFeature_SQLEngineVS = Create a SQL Server failover cluster Property(S): SimpleFeature_Feat2 = &Analysis Services Property(S): SimpleFeature_AnalysisServerVS = Create an Analysis Server failover cluster Property(S): SimpleFeature_Feat3 = &Reporting Services Property(S): SimpleFeature_Feat4 = N&otification Services Property(S): SimpleFeature_Feat5 = &Integration Services Property(S): SimpleFeature_Feat6 = &Workstation components, Books Online and development tools Property(S): SimpleFeatureTitle_Feat1 = SQL Server Database Services Property(S): SimpleFeatureTitle_Feat2 = Analysis Services Property(S): SimpleFeatureTitle_Feat3 = Reporting Services Property(S): SimpleFeatureTitle_Feat4 = Notification Services Property(S): SimpleFeatureTitle_Feat5 = Integration Services Property(S): SimpleFeature_Advanced = A&dvanced Property(S): SimpleFeature_AdvancedText = For more options, click Advanced. Property(S): SimpleFeature_Components = Components to be installed Property(S): SimpleFeature_OutOfSpace = There is not enough disk space to install the selected components. Click Advanced for more options. Property(S): Feature_DlgDesc = Select the program features you want installed. Property(S): Feature_DlgText = Click an icon in the following list to change how a feature is installed. Property(S): Feature_DlgTitle = Feature Selection Property(S): Feature_FeatureFrame = Feature description Property(S): Feature_GroupBox1 = Installation path Property(S): FileInUse_DlgDesc = Some files that need to be updated are currently in use. Property(S): FileInUse_DlgText = The following applications are using files that need to be updated by this setup. Close these applications and click Retry to continue. Property(S): FileInUse_DlgTitle = Files in Use Property(S): InitDlg_Title = Microsoft SQL Server Installation Property(S): InitDlg_Desc = Setup is preparing to continue with the installation. Property(S): InitDlg_Text = Please wait while setup prepares to continue with the installation. Property(S): Instance_Default = &Default instance Property(S): Instance_DlgDesc = You can install a default instance or you can specify a named instance. Property(S): Instance_DlgText = Provide a name for the instance. For a default installation, click Default instance and click Next. To upgrade an existing default instance, click Default instance. To upgrade an existing named instance select Named instance and specify the instance name. Property(S): Instance_DlgText1 = To view a list of existing instances and components click on Installed instances. Property(S): Instance_DlgTitle = Instance Name Property(S): Instance_Named = N&amed instance Property(S): IPAddress_DlgDesc = Enter virtual server information. Property(S): IPAddress_DlgStaticTextClusterIP = Network address: Property(S): IPAddress_DlgStaticTextIPAddress = &IP address: Property(S): IPAddress_DlgStaticTextIPSel = &Selected networks and IP addresses: Property(S): IPAddress_DlgStaticTextNetToUse = N&etwork to use: Property(S): IPAddress_DlgStaticTextSubnet = Network subnet: Property(S): IPAddress_DlgStaticTextVSName = Virtual server name: Property(S): IPAddress_DlgText = Enter an IP address for the virtual server. To add IP addreses for additional networks, click Add. Property(S): IPAddress_DlgTitle = Virtual Server Configuration Property(S): License_Devices = devices Property(S): License_Processors = processors Property(S): LicenseModeDlg_DlgDesc = SQL server supports two client licensing modes: per seat licensing and processor licensing. Property(S): LicenseModeDlg_DlgText = Choose the appropriate licensing modes. Property(S): LicenseModeDlg_DlgText1 = Per seat license: each device that accesses Microsoft SQL Server requires a separate license. Property(S): LicenseModeDlg_DlgText2 = Processor license: each processor on this server requires a separate license. Property(S): LicenseModeDlg_DlgTitle = Licensing Mode Property(S): LicenseModeDlg_Processor = &Processor license for Property(S): LicenseModeDlg_RadioButtonGroup = Licensing mode Property(S): LicenseModeDlg_Seat = Per &seat license for Property(S): Maintenance_ChgLabel = Ch&ange Installed Components Property(S): Maintenance_ChgLabelCl = &Maintain the Virtual Server Property(S): Maintenance_ChgText = Maintain features of this instance. Property(S): Maintenance_ChgTextCl = Add or remove nodes to the virtual server. Property(S): Maintenance_DlgDesc = You can change or remove this instance of SQL Server. Property(S): Maintenance_DlgTitle = Change or Remove Instance Property(S): Maintenance_RmvLabel = R&emove Microsoft SQL Server Property(S): Maintenance_RmvText = Remove all features of this existing installation from your computer. Property(S): Maintenance_RmvTextCl = Remove the virtual server from your cluster. Property(S): Maintenance_ChgLabelResume = Complete the &suspended installation Property(S): Maintenance_ChgTextResume = Complete the suspended installation of Microsoft SQL Server on your computer. Property(S): Progress_DlgDesc1 = The program features you selected are being installed. Property(S): Progress_DlgDesc2 = The Microsoft SQL Server is being removed. Property(S): Progress_DlgDesc3 = Setup is installing the components you selected. Property(S): Progress_DlgDesc4 = The Microsoft SQL Server is being reinstalled. Property(S): Progress_DlgText1 = Please wait while Setup installs Microsoft SQL Server. Installation may take several minutes. Property(S): Progress_DlgText2 = Please wait while Setup removes Microsoft SQL Server. This may take several minutes. Property(S): Progress_DlgText3 = Please wait while Setup updates Microsoft SQL Server. This may take several minutes. Property(S): Progress_DlgText4 = Please wait while Setup reinstalls Microsoft SQL Server. Installation may take several minutes. Property(S): Progress_DlgTitle1 = Installing Microsoft SQL Server Property(S): Progress_DlgTitle2 = Removing Microsoft SQL Server Property(S): Progress_DlgTitle3 = Configuring Microsoft SQL Server Property(S): Progress_DlgTitle4 = Reinstalling Microsoft SQL Server Property(S): Progress_lbStatus = Status: Property(S): Register_CompLabel = C&ompany: Property(S): Register_DlgSpec = The following information will personalize your installation. Property(S): Register_DlgText = The Name field must be filled in prior to proceeding. The Company field is optional. Property(S): Register_DlgText1 = Please enter your 25 character Product Key. You can find this number on the yellow sticker in the CD liner notes or the CD sleeve. Property(S): Register_DlgTitle = Registration Information Property(S): Register_NameLabel = N&ame: Property(S): Resume_ResumeText = Setup will complete the suspended installation of Microsoft SQL Server on your computer. To continue, click Next. Property(S): Resume_TextLine1 = Microsoft SQL Server Installation Wizard Property(S): ServiceAccountDlg_Advanced = &Customize for each service account Property(S): ServiceAccountDlg_Autostart = Start services at the end of setup Property(S): ServiceAccountDlg_AutostartServices = Start services at the end of setup Property(S): ServiceAccountDlg_DlgDesc = Service accounts define which accounts to log in. Property(S): ServiceAccountDlg_DlgTitle = Service Account Property(S): ServiceAccountDlg_Domain = Use a domain use&r account Property(S): ServiceAccountDlg_DomainLabel = &Domain: Property(S): ServiceAccountDlg_BuiltIn = Use the built-in S&ystem account Property(S): ServiceAccountDlg_PasswordLabel = &Password: Property(S): ServiceAccountDlg_Service = S&ervice: Property(S): ServiceAccountDlg_Service1 = Service: Property(S): ServiceAccountDlg_UsernameLabel = &Username: Property(S): Setup = Setup Property(S): StartCopy_DlgDesc = Setup is ready to begin installation. Property(S): StartCopy_DlgDescReinst = Setup is ready to begin reinstallation. Property(S): StartCopy_DlgDescRemove = You have chosen to remove the program from your system. Property(S): StartCopy_DlgDescRemoveCl = You have chosen to remove the program from your cluster. Property(S): StartCopy_DlgDescVSConfig = Setup is ready to begin updating your virtual server. Property(S): StartCopy_DlgText = Setup has enough information to start copying the program files. To proceed, click Install. To change any of your installation settings, click Back. To exit setup, click Cancel. Property(S): StartCopy_DlgText2 = Click Cancel to exit setup. Property(S): StartCopy_DlgTextConfig = Setup has enough information to start installation. Click Install to proceed. Property(S): StartCopy_DlgTextReinstData = You have chosen to re-install all features of existing installation including data files, and therefore overwrite the system database. Click Reinstall to proceed. Property(S): StartCopy_DlgTextReinst = You have chosen to re-install all features of existing installation. Click Reinstall to proceed. Property(S): StartCopy_DlgTextRemove = Click Remove to remove Microsoft SQL Server from your computer. After removal, this program will no longer be available for use. Property(S): StartCopy_DlgTextRemoveCl = Click Remove to remove Microsoft SQL Server from your cluster. After removal, this program will no longer be available for use. Property(S): StartCopy_DlgTextUnchanged = You did not change your virtual server configuration. Property(S): StartCopy_DlgTitle = Ready to Install Property(S): StartCopy_DlgTitleConfig = Ready to Update Property(S): StartCopy_DlgTitleReinst = Ready to Reinstall Property(S): StartCopy_DlgTitleRemove = Remove Microsoft SQL Server Property(S): StaticUserName = Account: Property(S): StaticUserPassword = &Password: Property(S): TextDataDir = &Data files: Property(S): TextProgramFileDir = Program files
I tried to install 'SQL Server 2005 Express Edition with Advanced Services'. First, I uninstalled the old version thru Add/Delete Programs in the Control Panel.
My first problem was I didn't have IIS installed on my computer, but, I could not find it in the downloads section.
Then the installation aborted because old version databases were in C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData. But, it would not let me delete them, saying that they were being used, even though nothing was running at the time that I tried to delete them.
I'm on Windows XP and recently downloaded Sql Server Express Advanced edition from http://msdn.microsoft.com/vstudio/express/sql/download/
I also downloaded the Toolkit but it won't install--says the services are already installed. However, I can't find the Business Intelligence link and don't see any Reporting buttons or menu items in Sql Server Express. I'm trying to learn T-SQL and Reporting Services but am frustrated. I've uninstalled, rebooted and reinstalled and still nothing. I'm even listening to the MS videos on SQL Server Express--Reporting Services but what they tell to download and install is what I've done--but no luck. Help!!!
I get the following error message each time I try to install SQL Server 2005 Express Edition with Advanced Services SP2:
Microsoft Internet Information Services (IIS) is either not installed or is disabled. IIS is required by some SQL Server features. Without IIS, some SQL Server features will not be available for installation. To install all SQL Server features, install IIS from Add or Remove Programs in Control Panel or enable the IIS service through the Control Panel if it is already installed, and then run SQL Server Setup again. For a list of features that depend on IIS, see Features Supported by Editions of SQL Server in Books Online.
This problem is described in: http://support.microsoft.com/kb/920201 and each of the IIS 7 components specified in this article have been installed.
When I continue with: http://support.microsoft.com/kb/934162, the script 'adsutil.vbs' cannot be executed because it does not exist anywhere on my drive.
My question is, what is the 'adsutil.vbs' script and how do I get a hold of it? Are these contortions really necessary to get SQL server working or has MS provided a patch for this nasty problem?
My system:
VISTA Home Premium, x64 Intel Quad CPU, 2.4GHz 4Gig RAM 500Gig hard disk
I installed Sql Server Express 2005 with Advanced Services on a PC.
Several critical items failed to install including: Sql Native Client Sql Server Database Services
The installer Summary Log says: 1) the system does not meet the hardware requirements. (I do not know why... see below) 2) SQL Native Client Error: An installation package for the product Microsoft SQL Server Native Client cannot be found. Try the installation again using a valid copy of the installation package 'sqlncli.msi'.
This is a WinXP SP2 PC with 1.67 ghz processor & 512Meg ram with 12 Gig of Hard disk space remaining unused.
The web site said to install .Net Framework 2.0. I did not see that listed on the links provided so I installed .Net Framework 3.5 instead. That installed fine, althought I get a message that .Net Framework 3.0 failed to install.
When I downloaded Sql Server Express 2005 with Advanced Services, from this web site http://msdn2.microsoft.com/en-us/express/bb410792.aspx, I thought it was unusual... but the download screen said "Publisher Unknown" instead of the usual "Microsoft".
This installation went normally but failed to install those critical items. Can someone tell me what I did wrong, and how to get it installed from here?
If i have been using sql server 2005 express for developing my application and i decide to upgrade to sql server 2005 express with advanced services while still working on the same application, what will happen to my application's database. Can i be able to continue with my work with out any major regrets.
Has i install SQL Server 2005 Express Edition with Advanced Services but why that Report Manager it was not installed. To me will not address under the reference http: // localhost/reports$SQLExpress since such catalogue is not present in IIS. In what there can be a problem?
Could someone from the SQL Server Express team confirm that SQL Server Express SP2 w/Advanced Services shows up as "SQL Server 2005" in the installed programs list? The "Express" portion seems to be missing. And how would one tell the difference between the Standard Edition and the Express Edition based on this?
I have encountered a showstopper problem during installation. I have installed SSEE on a fresh XP, all the checks but memory requirements passed. In the final stage of the install, during the "real work", the Client Component installation failed due to missing ASP.NET state service (? spelling). After the failure the installation continued, but marked both the db engine and the management studio failed. Despite this, management studio was installed and later I have removed it with the control panel applet.
I have found a service (executable: aspnet_state.exe), started it and retried the installation. It failed again so I have removed everything installed except the VSS writer and started it again. This time the installation completed (and finally got BIDS).
Is it enough to start this ASP service manually for a painless install? I don't want to play this "on the field" ever...
when insatalling "SQL Server 2005 Express Edition with Advanced Services SP2",the error message"cab file cannot open or corrupted",cannot read fron DVD/CD.when ignore that message installation exit.but,i try to install again.setup installed successfully .but sqlserevr cannot be connected.
I've downloaded SQL Server Express with Advanced Services from http://msdn.microsoft.com/vstudio/express/sql/download/ and installed all components. When I try to create a full-text catalog, I get the following message:
No full-text supported languages found.
select * from sys.fulltext_languages returns no lines.
How can neutral, English or maybe Hungarian word breakers be installed?
I am installing SQL Server 2005 Express Edition with Advanced Services on Windows XP Home Edition SP2 and received error 29521. I am installing with an account that has administrator rights. The summary.txt file contains: Error String : SQL Server Setup failed to execute a command for server configuration. The error was {Microsoft}{SQL Native Client}{SQL Server}CREATE DATABASE failed. Some file names listed could not be created. Check related errors.. Refer to the server error logs and Setup logs for detailed error information. Error Number : 29521
I am trying to upgrade the MSSQL Express with the Advanced Services version. I have:
Mobil Intel Pentium 4-M CPU 2.00 GHz
512 MB or RAM
50.8 GB free space on my C drive I am getting the following message:
- Minimum Hardware Requirement (Warning)
Messages
Minimum Hardware Requirement
The current system does not meet the minimum hardware requirements for this SQL Server release. For detailed hardware and software requirements, see the readme file or SQL Server Books Online
I have looked at the requirements in the books and it seems that I meet or exceed the minimums.
From the Windows update site and also via automatic download of updates, the following update fails every time...The SQL it is trying to update works fine. The following updates were not installed: Microsoft SQL Server 2005 Express Edition with Advanced Services Service Pack 2 (KB 921896)
Hi. I'm trying to get full-text search working on my SQL 2005 Express with Advanced Services and am having problems. I thought that I installed it correctly, and when I look in the services running, I see it SQL Server Fulltext Search(MSSQLSERVER). Also note that I have SQL Server 2005 Standard installed on this same laptop. I don't know if that Full text Search applies to the Standard, Express or both.
What I do see is that if I connect to the database engine named <mylaptop>, I can see the version is 9.0.1399 and I can see the check box to enable full-text indexing in a particular databases properties. When I run SELECT FULLTEXTSERVICEPROPERTY('IsFullTextInstalled'), I get a 1.
However, when I connect to the engine name <mylaptop>SQLExpress, I se the version is 9.0.3042, and I don't see the same check-box to enable full-text indexing. When I run SELECT FULLTEXTSERVICEPROPERTY('IsFullTextInstalled'), I get a 0.
I've never tried this before so I know I'm probably missing something basic. But, I have searched quite a bit and not found my answer. So, I'm looking to you for help.
For the first time, I want to set up the configuration of my SQL Server Management Studio Express (SSMSE) to allow me in doing the non-User-Instance/ADO.NET 2.0 programming from my VB 2005 Express. The SSMSE and VB 2005 Express are in my Windows XP Pro PC that is part of our NT 4 LAN System in our office. I read the article "How to configure SQL Server 2005 to allow remotre connections" in http://support.microsoft.com/kb/914277/ about (i) "Enable remote connections for SQL Server 2005 Express", (ii) Enable the SQL Server Browser service", (iii) Create exception in Windows Firewall, and (iv) Create an exception for the SQL Server Browser service in Windows Firewall. I entered the SQL Server Surface Area Configuration and I could not decide what options I should take for doing the non-User-Instance/ADO.NET 2.0 programming from my VB 2005 Express. I have the following questions on the page of "Minimize SQL Server 2005 Surface Area": (1) I saw "Configure Surface Area for localhost [change computer]". I clicked on [change computer] and I saw the following: Select Computer The Surface Area Configuration of this surface area of this computer or a remote computer. Specify a computer to configure: O Local computer O Remote computer Should I choose the "Local computer" or the "Remote computer" option? (2) Below the "Configure Surface Area for localhost [change computer]", I clicked on "Surface Area Configuration for Service and Connections", Select a component and then configure its services and connections: |-| SQLEXPRESS |-| Database Engine Service I picked => Remote Connection On the right-hand side, there are: O Local connections only O Local and remorte connections O Using TCP/IP O Using named pipes only O Using both TCP/IP and named pipes Should I choose O Local and remorte connections and O Using named pipes only?
Please help and tell me what options I should choose in (1) and (2).
I'm trying to configure a ReportServer in a Non-DefaltWebSite in my server. During the Reporting Server Configuration's process, everything works fine! All the informations are accept. But, when I try to access the address http://myserver.com/reportserver (or http://myserver.com/reports) a login message box is shown. I've already tried to enable a lot of user accounts, but with no success! I've read some articles that try to explain how to install a ReportServer in a Non-DefaultWebSite, but its doesn't work too.
Any sugestions?
My server is a Windows 2003 Standard Edition w/ SP1, IIS 6.0, SQL Server 2005 Express Edition Advanced Server.
1) I uninstalled Advanced SQL with Report Server to install 2005 SQL Developers Editions.
2) For some reason I am unable to completely uninstall Express Report Server.
3) Configuration Manager is still showing SQL Exp Report Server, even though I uninstalled Advanced Server.
4)I tried to remove though A/R programs (using my 2005 DE) - I see it listed but I receive the following error:The setup failed to read IISmime maptable the error code is -2147024893.
5) When I try to use 2005 Report Service Config Manager, I receive the following error: An unknown error in WMI Provider Error code 80040219 wmi provider.
So I am unable to setup my 2005 SQL DE Report Server.
Any ideas on uninstalling Express Report Server...This might be part of my problem.
I have SQL Express 2005 with Advanced Services on a development box that I also want to have installed side-by-side with SQL Server 2005 Standard Edition so I can develop apps using either edition based on the features I need (or don't need). From what I understand from sifting through other posts is that side-by-side installs of these two editions is supported and I should setup a named instance for each edition (SQLEXPRESS for the express edition and MSSQLSERVER for the standard edition). Is this setup accurate or is there another/better way?
Also, does anybody know if side-by-side installations of Reporting Services is also supported? If I install SQL Server 2005 Standard Edition with Reporting Services, will there be two different report servers running in IIS? Since there are different features in Reporting Services between the two editions, I'm not sure how side-by-side installations will effect one another.
