Connect SQL Server Express 2005 On A Remote Computer
May 28, 2006
Hello Everyone,
I just got a Virtual Dedicated Server and installed SQL Server Express 2005 on it and while I was installing choose Mix Mode authentication and setup a sa password.....
I want to connect to that database remotely from my machine using VS 2005 or Management Studio....both are encountering the same problems.....
On the Virtual Dedicated machine if I install management studio I run has no problem....it asks me for the server name : somethingSQLEXPRESS then username and password and works fine...
The same thing I try to do remotely is not happy with ....I tried to give the IP address of the server same thing no luck.....
Can somebody tell me what I'm doing wrong and where....
Thanks,
Harsimrat
View 1 Replies
ADVERTISEMENT
Oct 25, 2007
Hi --- I would like a few users to be query tables, run (create ?) stored procedures, etc. on a SQL 2005 Workgroup database (the sql server is on a dedicated server)...
Will the Toolkit version (or any other version) support this?
Thanks!
View 1 Replies
View Related
Aug 28, 2006
Can I connect to remote SQL 2005 server through SQL Server Management Studio Express? I always get a error code 18456 when I try to connect to SQL 2005 server through SQL Server Management Studio Express. I'm sure I enter correct username and password!
View 3 Replies
View Related
Dec 31, 2005
Hi,I've an account with a hosting service provider online for SQL Server database. I've downloaded SQL Server 2005 Express from ASP.Net. How can I use it to connect to my SQL Server Database which is sitting on remote server? The hosting provider gave me following things to connect to the remote database.Server NameDatabase NameUser NamePasswordRegards,A.K.R
View 2 Replies
View Related
Feb 15, 2007
I am unable to connect to a remote server on Computer A from Computer B, but when I reverse it I am able to connect to a remote server on computer B from computer A. I have SQL Server 2005 Developer Edition on both computers. I am using the using the SQL Management Studio to connect. Both Computers have these settings
Using Surface Area Configuration both have local and remote connections checked. Both computers using tcp/ip only checked.
Using Configuration Manager both the sql server and the sql browser are running. Both computers have tcp/ip protocols enabled.
Under the server properties on both computers, under the Security Tab, I have SQL Server and Windows Authentication Mode checked. Under the Connections tab I have Allow remote connections on this server checked.
I believe I have the Security for both the server and databases done properly giving them both proper Logins and User Roles with the proper permission.
Also went to my window firewall settings and under the Exceptions tab, I added both the sql server.exe and sql browser.exe programs on both computers on my remote network.
But when I connect on Computer B, I get an error message stating:
TITLE: Connect to Server
------------------------------
Cannot connect to 'ServerName'
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 233)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476
------------------------------
BUTTONS:
OK
----------------------------
I tried pinging server a and then server b and they both pinged.
Could someone please tell me what could be wrong on my remote computers.
View 6 Replies
View Related
Jun 21, 2006
Please bare with me as I do not have much knowledge in this area with MSSQL.
I have installed MSSQL 2000 Developer and I have setup a database which I am able to connect to and work fine with from the actual server MSSQL is installed on.
The problem comes in when i try to connect to that same database from a different remote server. It will not connect to the DB from this remote server but I know all the connection information is correct so its something on the MSSQL DB server causing this and not on this remote server.
Someone I know has had this problem and has fixed it but they wont tell me how. All I know is they said something about manually opening the ports on the MSSQL server and he also said when you set it to dynamicly determine the port that MSSQL is listening on it errored out. however if you set it staticly to 1433 it worked fine.
Ive also installed SP4 in attempt to fix this but no luck with that either. And I can also get the same exact remote server to connect to completely different DB server without issues.
If anyone can please help walk me through this I would be greatly appreciate and I am also willing to pay some money if it will make my life easier.
View 6 Replies
View Related
Jan 5, 2007
Hi,
I have Windows XP Home Workgroup LAN.
I am treating one of the XP Home system as 'Server' and installed SQL Express 2005 SP1. Enabled remote connections access.
I have total 4 XP Home systems, out of which one i am treating as Server, from the rest 3 computers, 2 are successfully connected to the Server and able to access SQL Express without any problems. But the 3rd system is unable to communicate with the Server. I disabled all firewalls in this 3rd system but still unable to connect to the server. I am able to ping the server, browse for shared folders on the server. Except SQL Express remote connection, everything else in the network is accessible from this 3rd computer.
Can anyone help me on how to troubleshoot this 3rd computer sql express connection problem to the server.
I don't have any error message to provide here. It just says, unable to connect to sql server, verify username/password etc.
Is there any limitation on SQL Express remote connections ?
View 1 Replies
View Related
Dec 8, 2007
Hi All!!!
In my Computer has MS SQL Server 2000(with default Instance) and now I Install MS SQL server 2005(with Instance name: SQL2005 ). Now I want to write Web Application to connect to the both databases (SQL Server 2000 and MS SQL Server 2005), How to Add connection string in my web.config to do it.
Help me ???
Thanks & Regards,
View 3 Replies
View Related
Jan 18, 2006
Hello,
Sorry for my question, I know, that there were several topics about sql 2000 vs SQL 2005, I read all them but unfortunately I haven't got the correct answer. I must install my intranet application that uses asp.net 2.0 and SQL 2005 Express to a Windows 2003 server with SQL 2000. It is possible to install SQL 2005 Express beside the 2000 server? It is very important, because I have no possibility to test and that Win2003 server there are a few programs that use SQL 2000. What will happen with the 2000 databases and their programs if I install the 2005 Express to the server? They will work fine with 2000 and my application will work with 2005?
Or instead it should I configure my application to use 2000 capable connentionstrings?
View 3 Replies
View Related
Mar 18, 2008
I have a very basic console application whose sole purpose is to query a database on the same local computer. When i run the application, i get the error message below:
Cannot open user default database. Login failed.Login failed for user 'someDomainSomeUserName'.
Below is my connection string also
myconnection_string = New SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=C:Reporting SystemApp_Datasafetydata.mdf;Integrated Security=True;Connect Timeout=30;User Instance=True").
After some googling, some post pointed to deleting a user folder at :
C:Documents and SettingsmyusernameLocal SettingsApplication DataMicrosoftMicrosoft SQL Server DataSQLEXPRESS
but still deleting that folder and restarting the machine doesn't help and i also have remote connections enabled. Help is really needed.
NOTE: The same application runs on a different computer with XP but fails on the Pc with windows server 2003.
View 3 Replies
View Related
Mar 24, 2008
I have a user who is trying to load SQL server 2005 Express on a new Acer laptop computer. The computer has the following:
Windows Vista Home Premium 32 bits
AMD Turion 64 mobile technology CPU
1790 MB of RAM
When the user tries to load SQL server 2005 Express it does not load. The user after the load is getting an €œUnhandled exception has occurred in your application€? when he tries to run the application.
Does anyone know how to fix this problem?
Thank you,
Photomultiplier
View 5 Replies
View Related
Sep 13, 2006
HiIm trying to connect Visual Basic Express 2005 to a remote SQL Server Express 2005. I cant find how i can do that in VB.net Express.In Web developer there are no problem to connect to a remote SQL server but i cant find it in VB.net Express. The XP with the SQL server that i want to connect to is on the local network. Greatful for help!
View 1 Replies
View Related
May 5, 2006
Hi All,
I've developed an application that connects to a SQL Server 2005 Express database. I created a DSN to connect to the database through ODBC. Currently, I am testing locally and everything works fine.
I would now like to install my application on another workstation and connect remotely to the database located on my development machine.
The client workstation does not have SQL Server 2005 Express installed on it because I would just like my application to connect remotely by creating the DSN and using ODBC. What I'm missing here are the database drivers. The "SQL Natice Client" is not available on this client workstation. How can I deploy the necessary drivers with my installation file so that I may create the required DSN name using the SQL Native Client driver?
Thanks!
View 6 Replies
View Related
Jan 25, 2008
I have an application developed by VB.NET 2005, and I need to install the Data base on a server to allow the clients access the data base from thier own computers, i need to allow all the functions on that data base (Insert, Update, and Delete).
I tried to do it by installing the SQL Server on a computer named (PC1) and the application on a computer named (PC2), and they are connected to the same subnet, I need to know what are the properties that I should do on the SQL Server in order to be visible through PC1 to make the connection string? And does the authintication mode affect the process?? whether it is Windows authintication or SQL Server Authintication??
Note: I am using SQL Server 2005 Developer Edition.
Thanking you in advance..
Mak
View 7 Replies
View Related
Dec 12, 2006
I'm having a problem connecting with a Java application but I CAN connect using my .Net application - the user name and password are the same for both (using the same database on SQL Server Express 2005).
The error I get is: "com.microsoft.sqlserver.jdbc.SQLServerException: Cannot open database "CORNERS" requested by the login. The login failed." An interesing note - I get the same message if the database is not running.
SQL Server Express 2005 is installed in mixed mode.
Here is my connection string in the .Net appplication: <add key="connectString" value="Server=(local);UID=sa;PWD=myPasswd;Database=CORNERS" />.
These are my values in my Java app web.xml -
<init-param>
<param-name>DBDriver</param-name>
<param-value>com.microsoft.sqlserver.jdbc.SQLServerDriver</param-value>
</init-param>
<init-param>
<param-name>DBURL</param-name> <param-value>jdbc:sqlserver://localhostsqlexpress:1055;databaseName=CORNERS</param-value>
</init-param>
<init-param>
<param-name>DBUser</param-name>
<param-value>sa</param-value>
</init-param>
<init-param>
<param-name>DBPwd</param-name>
<param-value>myPasswd</param-value>
</init-param>.
And yes, the port is 1055 - I checked to find it.
I am using Microsoft SQL Server 2005 JDBC Driver 1.0 (sqljdbc_1.0.809.102).
Does anyone have any idea what is wrong so that the login fails in the Java application but works in the .Net application?
View 7 Replies
View Related
Mar 19, 2007
Hello
I use SQL 2005 - SQL Server Management Studio to connect to my hosting SQL Server to manage my database , its about 1 month which I have installed Vista and SQL 2005 its working fine in local , but today I just wanted to connect to my remote server and I got this error :
Cannot connect to <My server IP Address>
I thought its a server problem , but its not. I tested it by connecting using same SQL 2005 on a windows xp system , the problem is only in vista,
by the way its SQL 2005 SP2
what can I do to solve this prob
View 11 Replies
View Related
Feb 2, 2008
I have created a ASP.NET application on a development server that accesses a SQL Server 2005 database on the same server. This application runs flawless. However when I try to connect the same application to an identical database on a remote SQL Server database I get the following error " Exception Details: System.Data.SqlClient.SqlException: Login failed for user ''. The user is not associated with a trusted SQL Server connection." I actually backed up the database on the development server, and then restored the same database on the remote server. I can see the original ASPNET user account in the security tab of the restored database. However I cannot connect. The remote server has ASP.NET 2.0 installed. I have created a security database on the remote server (aspnetdb) and added the same login credentials as on the development server. I have changed the database connection strings in the web.config file to point to a: to the remote database only, and b: to both the remote database and the remote security database (aspnetdb).
I am at a loss, can anyone help.
View 18 Replies
View Related
Feb 17, 2006
i'm using sql server 2005 developer edition. In sql server 2000, when i connect to my remote database, i just need to provide my IP address, server name with password in Query Analyzer. However, i do not know how to connect to remote database in SQL Server 2005. I did allow local and remote connection using Surface Area Configuration. However, after setting this, i do not know where to input the IP add, server name and pwd as well...>_<.
Who can help me?? Thanks for ur expertise.
View 5 Replies
View Related
Aug 22, 2007
Hi all,
I have SQL Server Express and VB 2005 Express installed in a Microsoft Windows XP Pro PC that is a terminal PC in our office Network. My Network Administrator has granted my terminal PC for Administrator Use. I tried to do the ADO.NET 2.0-VB 2005 programming in my terminal PC and I could not get a remote connection in the Window Form Application via Window Authorization. I do not know how to make this kind of remote connection in my Network. Please help and advise.
Thanks in advance,
Scott Chang
View 6 Replies
View Related
Sep 19, 2007
Hi all,
In my office computer network system (LAN), my Windows XP Pro PC has SQL Server Express and VB 2005 Express installed and I was granted to have the Administrator priviledge to access SQL Server Express. I tried to create a SQLCLR project in my terminal PC.
1) I tried to set up a remote connection to SQL Server Express in the following way: SQL Server EXpress => SQL Server Surface Area Configuration. In the Surface Area Configuration for Service and Connection - local, I clicked on Remote Connection of Database Engine, SQLEXPRESS and I had a "dot" on "Local and remote connections" and "Using TCP/IP only". Then I clicked on "Apply" and "OK" buttons. Then I went to restart my database engine in SQL Server Management. When I went to check SQL Server 2005 Surface Area Configuration, I saw the arrow is pointing to "Service", not to "Remote Connections"!!!??? Is it right/normal? Please comment on this matter and tell me how I can have "Remote Connecton" on after I selected it.
2) After I restarted the database engine (I guess!!), I executed the following project code (copied from a book) in my VB 2005 Express:
//////////////--Form9.vb---/////////////////
mports System.Data.SqlClient
Imports System.Data
Public Class Form9
Dim cnn1 As New SqlConnection
Private Sub Form5_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
'Compute top-level project folder and use it as a prefix for
'the primary data file
Dim int1 As Integer = InStr(My.Application.Info.DirectoryPath, "bin")
Dim strPath As String = Microsoft.VisualBasic.Left(My.Application.Info.DirectoryPath, int1 - 1)
Dim pdbfph As String = strPath & "northwnd.mdf"
Dim cst As String = "Data Source=.sqlexpress;" & _
"Integrated Security=SSPI;" & _
"AttachDBFileName=" & pdbfph
cnn1.ConnectionString = cst
End Sub
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
'Create a command to create a table
Dim cmd1 As New SqlCommand
cmd1.CommandText = "CREATE TABLE FromExcel (" & _
"FirstName nvarchar(15), " & _
"LastName nvarchar(20), " & _
"PersonID int Not Null)"
cmd1.Connection = cnn1
'Invoke the command
Try
cnn1.Open()
cmd1.ExecuteNonQuery()
MessageBox.Show("Command succeeded.", "Outcome", _
MessageBoxButtons.OK, MessageBoxIcon.Information)
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
End Sub
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
'Create a command to drop a table
Dim cmd1 As New SqlCommand
cmd1.CommandText = "DROP TABLE FromExcel"
cmd1.Connection = cnn1
'Invoke the command
Try
cnn1.Open()
cmd1.ExecuteNonQuery()
MessageBox.Show("Command succeeded.", "Outcome", _
MessageBoxButtons.OK, MessageBoxIcon.Information)
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
End Sub
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
'Declare FromExcel Data Table and RowForExcel DataRow
Dim FromExcel As New DataTable
Dim RowForExcel As DataRow
FromExcel.Columns.Add("FirstName", GetType(SqlTypes.SqlString))
FromExcel.Columns.Add("LastName", GetType(SqlTypes.SqlString))
FromExcel.Columns.Add("PersonID", GetType(SqlTypes.SqlInt32))
'Create TextFieldParser for CSV file from spreadsheet
Dim crd1 As Microsoft.VisualBasic.FileIO.TextFieldParser
Dim strPath As String = _
Microsoft.VisualBasic.Left( _
My.Application.Info.DirectoryPath, _
InStr(My.Application.Info.DirectoryPath, "bin") - 1)
crd1 = My.Computer.FileSystem.OpenTextFieldParser _
(My.Computer.FileSystem.CombinePath(strPath, "Book1.csv"))
crd1.TextFieldType = Microsoft.VisualBasic.FileIO.FieldType.Delimited
crd1.Delimiters = New String() {","}
'Loop through rows of CSV file and populate
'RowForExcel DataRow for adding to FromExcel
'Rows collection
Dim currentRow As String()
Do Until crd1.EndOfData
Try
currentRow = crd1.ReadFields()
Dim currentField As String
Dim int1 As Integer = 1
RowForExcel = FromExcel.NewRow
For Each currentField In currentRow
Select Case int1
Case 1
RowForExcel("FirstName") = currentField
Case 2
RowForExcel("LastName") = currentField
Case 3
RowForExcel("PersonID") = CInt(currentField)
End Select
int1 += 1
Next
int1 = 1
FromExcel.Rows.Add(RowForExcel)
RowForExcel = FromExcel.NewRow
Catch ex As Microsoft.VisualBasic.FileIO.MalformedLineException
MsgBox("Line " & ex.Message & _
"is not valid and will be skipped.")
End Try
Loop
'Invoke the WriteToServer method fo the sqc1 SqlBulkCopy
'object to populate FromExcel table in the database with
'the FromExcel DataTable in the project
Try
cnn1.Open()
Using sqc1 As SqlBulkCopy = New SqlBulkCopy(cnn1)
sqc1.DestinationTableName = "dbo.FromExcel"
sqc1.WriteToServer(FromExcel)
End Using
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
'Read the FromExcel table and display results in
'a message box
Dim strQuery As String = "SELECT * " & _
"FROM dbo.FromExcel "
Dim str1 As String = ""
Dim cmd1 As New SqlCommand(strQuery, cnn1)
cnn1.Open()
Dim rdr1 As SqlDataReader
rdr1 = cmd1.ExecuteReader()
Try
While rdr1.Read()
str1 += rdr1.GetString(0) & ", " & _
rdr1.GetString(1) & ", " & _
rdr1.GetSqlInt32(2).ToString & ControlChars.CrLf
End While
Finally
rdr1.Close()
cnn1.Close()
End Try
MessageBox.Show(str1, "FromExcel")
End Sub
End Class
//////////////////////////////////////////////////////////////////////////////
I got the following error messages:
SecurityException was unhandled
Request for the permission of type 'System. Security. Permissions.FileIOPermission,mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'failed that is pointing to the code statement "Dim int1 As Integer = InStr (My.Application.Info.DirectoryPath, "bin")."
Troubleshooting tips:
Store application data in isolated storage.
When deploying an Office solution, check to make sure you have fulfilled all necessary requirments.
Use a certificate to obtain the required permission(s).
If an assembly implementing the custom security references other assemblies, add the referenced assemblies to the full trust assembly list.
Get general help for the exception.
I am a new Microsoft VS.NET Express user to do the SQL Server 2005 Express and VB 2005 Express programming by using the example of a tutorial book. Please help and tell me what is wrong in my SQLCLR sep-up and project coding and how to correct the problems.
Many Thanks in advance,
Scott Chang
View 3 Replies
View Related
Mar 12, 2007
Hi,
I want to make a component library in Visual Basic.NET and connect to a remote Sql Server. When I create a new DataSet with the wizard, I can only connect to a .mdf file, but not to a Sql Server. With Visual Web Developer I can connect to a Sql server. What is the difference between these enviroments ? How can I do the same with Visual Basic.NET ?
Thanks in advance.
View 1 Replies
View Related
Sep 28, 2006
Everything was working fine. I have been able to connect using windows authentication. Then, I went into the ODBC manager to add a data source and it failed to connect so I went back into the Server management studio to modify users. After doing this I now get an error when I try to conenct the management studio to the SQL server.
I wasn't modifying the login for my windows account that I normally use, I was modifying a different one, however I now get the message "An error has occured while establishing a connection to the SQL server. This kind of problem can ocure because the default behavior of the server does not support all connection methods" blah blah.
Does anyone know how I can attach to the server? Or, do I need to somehow remove the server and create a new one? How would I do that?
Thanks in advance for any input.
View 1 Replies
View Related
Mar 10, 2006
I've seen the following error posted when people try to connect to their server via their applications but didn't see anyone having problems when trying to connect with SQL Server Management Studio Express. Am I missing something here? This is the error:<<An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)>>The server is not remote so I don't see why I need to enable remote connection. I am also using the default connection settings.
View 3 Replies
View Related
Feb 24, 2007
On my home machine without permanent network connections enabled, I cannot get the Management Studio connect to the database server. Always get this error:
Cannot connect ot MPLIAMSQLEXPRESS
Additional Information:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, erro: 26 - Error Locating Server/Instance Specified)(Microsoft SQL Server)
I have used the SQL Surface Area Configuration Tool to reset the defaults to allow remote connections, stopped and restarted the server, but still get the same message.
Please help.
View 12 Replies
View Related
Dec 18, 2007
I'm green on this networking stuff so any help is greatly appreciated.
I have setup my home computer as a server and assigned a static IP to it. I installed SQL Server 2005 Developer and allowed remote connections to it through the Surface Area Config tool, added port 1433 TCP and 1434 UDP to firewall's exception list, and started the SQL Server Browser service.
Now I can't seem to remote connect to this SQL Server from my office network. Is there something I'm doing wrong here?
Thanks!!
View 3 Replies
View Related
Jan 16, 2008
Hey all! I am new in this form and also new with the SQL serve. I have installed that free express edition of SQL server 2005 and when i am trying to connect to server from my C#.net application i am not able to do it and when i am trying to degug it gives me the error that is the user is not SQL thrusted user. I am able to connect directly thru SQL server using this userid and password but not thru VWD 2005 Express application.
I have read online that so many people are having that problem. so is it the problem of swl server Express edition or do i have to make some setting to connect to the application.
Please please please please someone guide me . I am stuck here in the beginning only. I would really appreciate it.
the code that i wrote is here:----
using System.Data.SqlClient;
public partial class _Default : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
if (!Page.IsPostBack)
{
}
}
protected void Submit_Click(object sender, EventArgs e)
{
String querry;
SqlDataReader dbread;
try
{
SqlConnection conn = new SqlConnection(ConfigurationSettings.AppSettings["Conn1"]);
SqlCommand comm = new SqlCommand();
conn.Open();
querry = " Select password from login where userId='" + TxtUser.Text + "'";
comm.CommandText = querry;
comm.Connection = conn;
dbread = comm.ExecuteReader();
dbread = null;
if (dbread.HasRows)
{
while (dbread.Read())
{
if (dbread["password"].ToString() == Txtpwd.Text)
{
Response.Redirect("home.aspx");
}
}
Response.Write("Your Password Doesn't Match");
}
else
{
Response.Write("Your User Name Is Wrong");
}
conn.Close();
}
catch (Exception ex)
{
Response.Write(" This is an Error - " + ex.Message );
Response.End();
}
Thanks,
Komal
View 1 Replies
View Related
Mar 14, 2006
I'm new to programing things, i'm on my own with MCAD/MCSD Amid Calani, i came to the point were i can"t go any further: i have VS enteprise architect,but i have only instece of SQL server,recently i downloaded SQLExpress , what should i do to connect SQL server to my computer, just because i'm new to to it looks stupid but maybe someone can HELP me with this. HELP, HEL,SOS,SOS...:eek:
View 14 Replies
View Related
May 4, 2005
Is there an easy way to backup a database on a remote SQL Server to a backup file on my local computer?
View 3 Replies
View Related
Jan 21, 2004
I am about designing an access project file that connect to a SQL Server database : it could be either on the local computer or a remote workstation, this depending on where the front end is running.
Bypassing the default log on dialog box i have set my own form that users should use to connect on adp. Then using baseconnection string i connect the adp to sql server database.
My concern is how can i check from vba if the instance of SQL Server where my back end database is located is running in order to make
users knowing that due sql server service status off their connection
tentative will fail.
inform u i can check same from console management however i would to automate same controle from my adp and avoid that users have to operate such task...
View 4 Replies
View Related
Apr 7, 2008
Hello,
i'v installed a pogram that uses SQLEXpress and reporting sevices on a clients computer. I can acces the reports wih http://localhost/reports$SQLEXpress from that computer, but i can't reach them from other computers in the netwok by typing http://servername/reports$SQLEXpress
i am asked to imput a pasword for user "servername/guest" (which i do not know and dont think there is one) and then get the following:
You are not authorized to view this page
You do not have permission to view this directory or page using the credentials you supplied.
Please try the following:
Click the Refresh button to try again with different credentials.
If you believe you should be able to view this directory or page, please contact the Web site administrator by using the e-mail address or phone number listed on the preactor home page.
HTTP 401.3 - Access denied by ACL on resource
Internet Information Services
What should i do to solve this problem?
Regards
Darius
View 6 Replies
View Related
May 30, 2007
Hello
I am able to connect to the server and most of the time I can't connect.
It is important to be able to connect so I can manage my mdf - database.
To test ... I disable the firework but I still can't connect 90% of the time.
Thank you in advance.
~ Peaches ~
View 3 Replies
View Related
May 26, 2008
Hi,
I have VS Pro 2005 and SQL Server Express 2005 installed on an XP Pro machine. When using VS 2005, in the 'Server Explorer' window I can see and attach to two SQL Server databases that I have set-up. But if I attempt to access the same databases from withn the 'Solution Explorer' window I get the following dialog box message,
"
Required Component Missing (Dialog box heading)
Connections to SQL Server Files (*.mdf) require SQL Server Express to function properly. Please verify the installation of the component or download from the URL: http://go.microsoft.com/fwlink/?LinkId=49251
"
I have uninstalled and then reinstalled both VS 2005 and SQL Server Express twice but it has helped.
I don't understand why I'm getting this error because all of the server configuration tools and connection utilities seem to work fine but VS say's that SQL Server Express is not installed.
Thanks,
CLN
P.S.
I had another application that required MSDE 2000A to be installed. When I removed the other application I also removed MSDE 2000A and that's when the problem began.
View 3 Replies
View Related
