It seams as if the Connect Timeout property is not working correctly if the server that one is trying to connect to is down. This is my connection string.
Provider=SQLOLEDB;Pooling=False;Data Source=172.16.136.4;Initial Catalog=Db1;User ID=test;Password=test;Connect Timeout=5;
The timeout is ignored and the connection times out after about 15/20 seconds?
Any ideas?
I have a stored proc to query a very large database, and it always times out at the 30th sec, even though I have changed the connect timeout to 300, as follows
(Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.)
Data Source=.SQLEXPRESS;AttachDbFilename="C:Documents and SettingsAdministratorMy Documentsabc.mdf";Integrated Security=True;Connect Timeout=300;User Instance=True
This timeout issue does not occur to smaller databases. Any idea?
hyei set in the connection string "connect timeout=400" and the application send error after 30sec ... why ?
*in the sql server properties , the connection time set to 0 . *i know the run time of the query is very long , but in this case its doesn't matter :)
There are two machines(A and B) in intranet . The network between the machines is well.
I can't use client in machine A to connect the sql server in Machine B until i set the "connection timeout" a bigger number such as 30 seconds. If i use the default "connection timeout" to connect , it will return a error message "
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding"
But The correspondence of executing sql command is very quick after the connection is established.
Why need i bigger "connection timeout"？ Is that a configuration problem?
Thanks
Hello -
I've setup SQL Server 2005 from scratch over half a dozen times now. I have remote connection down cold.
Install the SQL Server. Run Surface config. Enable remote connection over TCP/IP and named pipes. Set up client alias. Restart SQL Server. (I install for mixed mode every time.)
Every time this has worked up till now. Start up SQL Server Mgmt Studio, select the server to login to, enter the sa user name and password, boom, you're in.
This time I cannot get in. Connection is denied both for sa and windows authenticated login as Administrator. This is the two line dump from event viewer - the first is an audit problem, the second is the error.
Event Type: Failure Audit
Event Source: MSSQLSERVER
Event Category: (4)
Event ID: 18452
Date: 11/22/2006
Time: 7:47:12 AM
User: N/A
Computer: WFR01
Description:
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 10.1.2.236]
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 14 48 00 00 0e 00 00 00 .H......
0008: 06 00 00 00 57 00 46 00 ....W.F.
0010: 52 00 30 00 31 00 00 00 R.0.1...
0018: 07 00 00 00 6d 00 61 00 ....m.a.
0020: 73 00 74 00 65 00 72 00 s.t.e.r.
0028: 00 00 ..
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (4)
Event ID: 17806
Date: 11/22/2006
Time: 7:47:12 AM
User: N/A
Computer: WFR01
Description:
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 10.1.2.236]
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 8e 45 00 00 14 00 00 00 ŽE......
0008: 06 00 00 00 57 00 46 00 ....W.F.
0010: 52 00 30 00 31 00 00 00 R.0.1...
0018: 00 00 00 00 ....
The only thing different is that this server is a terminal services server. I put the server into install mode before I installed SQL Server. After installation and surface config but before restart, I put the server back into execute mode.
Is there a problem installing SQL Server on a Terminal Services Server? If not, I cannot figure out what the problem is.
Thanks in advance for the help
HI All,
i have copied a project from work i am working on and have created the same project at home in visual studio.net - everything is the same as it is at my work - for some reason though i cannot connect to the servers from my home project
can anyone help me with this - i get the message "SQL Server does not exist or access denied"
my web config has exactly the same set up with a key in appSettings as
<add key="My_Connection" value="User ID=myID;Password=myPassword;Initial Catalog=myCatalog;Data Source=xx.xx.xx.xx" />
can anyone tell me why i would not be able to even see my work database from home?
thanks in advance
Gilesb
Hi,
Please direct me to the right forum if this is not the right one.
Upon installation of SQL Server 2005, I opened the SQL Server Management Studio, connected using Windows Authentication and went to the security node in the tree. I created a log in called "TestLogin". I restarted my server just to make sure everything took and when I tried to log in using TestLogin via SQL Server Authentication, I get the below error. I have mixed mode enabled as well as named pipes. I am not sure what the issue is or what to try next. I even get the same error when trying to use "sa".
Thanks,
- Joel
TITLE: Connect to Server
------------------------------
Cannot connect to TestServer.
------------------------------
ADDITIONAL INFORMATION:
A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
I see we can install SQL Server 2016 CTP2 and Tabular SSAS.However, where are the tools to allow us to connect to the server and work with the tabular models?Supporting features such as bi directional filtering, etc..The existing SSDT BI tools for 2014 don't contain those additional features (editing relationship filtering direction for example).
View 2 Replies View RelatedHey. I've a windows vista machine which can't connect to SQL 2005 box. Other machines which are lower than vista work fine. Also, vista box can connect to other SQL 2005 instances but can't connect to only one instance. But, I can connect to the instance fine from my XP box. Also, it's not a permissions issue. This user is an SA and can connect form some other machine. SQL 2005 box is at 2047 version right now. And, the user is able to connect to some other boxes which are also at 2047. Please help. Thank you
View 1 Replies View RelatedBasically, I am asking if it is possible to use SSMS (Query Analyzer window) with Informix. I am thinking linked server. If I have the ODBC driver installed on my workstation (win 7 pro VM workstation -- SSMS on same VM machine) is this doable? Do I just do the standard linked server routine or is there a special way (if it is even doable).
View 4 Replies View RelatedHello,
I've found some strange behavior of SQLOLEDB provider. When I set "Preserve on Abort" on true and delete some row in transaction, I cannot see this row after transaction rollback. Is this correct?
My code:
Dim Conn As ADODB.Connection Dim recSet As ADODB.Recordset Dim cmd As ADODB.Command Dim c1 As Long, c2 As Long ' ## Open a connection Set Conn = New ADODB.Connection Conn.Open "Provider='SQLOLEDB';Integrated Security=SSPI;Data Source='PENASSQLEXPRESS';Initial Catalog='PokusDB';" ' ## Open a table Set recSet = New ADODB.Recordset '## Open cursor Set cmd = New ADODB.Command Set cmd.ActiveConnection = Conn cmd.Properties("Preserve on Abort") = True cmd.CommandText = "SELECT * FROM zkouska order by text" recSet.Open cmd, , adOpenStatic, adLockOptimistic, adCmdUnknown '## TransBegin Conn.BeginTrans '## CursorMove recSet.MoveFirst '## RecordDelete recSet.Delete adAffectCurrent recSet.Requery adOptionUnspecified '## TransAbort Conn.RollbackTrans '## CursorMove recSet.MoveFirst c2 = recSet.Fields("cislo").Value If c1 <> c2 Then Err.Raise 1000, "Transaction test failed" End If
When I call Requery after RollbackTrans everything is OK, but what is then "Preserve on Abort" for?
Also I must call Requery after delete or I will get an error after MoveFirst. Do I miss something?
Hello,
I've found some strange behavior of SQLOLEDB provider. When I set "Preserve on Abort" on true and delete some row in transaction, I cannot see this row after transaction rollback. Is this correct?
My code:
Dim Conn As ADODB.Connection Dim recSet As ADODB.Recordset Dim cmd As ADODB.Command Dim c1 As Long, c2 As Long ' ## Open a connection Set Conn = New ADODB.Connection Conn.Open "Provider='SQLOLEDB';Integrated Security=SSPI;Data Source='PENASSQLEXPRESS';Initial Catalog='PokusDB';" ' ## Open a table Set recSet = New ADODB.Recordset '## Open cursor Set cmd = New ADODB.Command Set cmd.ActiveConnection = Conn cmd.Properties("Preserve on Abort") = True cmd.CommandText = "SELECT * FROM zkouska order by text" recSet.Open cmd, , adOpenStatic, adLockOptimistic, adCmdUnknown '## TransBegin Conn.BeginTrans '## CursorMove recSet.MoveFirst '## RecordDelete recSet.Delete adAffectCurrent recSet.Requery adOptionUnspecified '## TransAbort Conn.RollbackTrans '## CursorMove recSet.MoveFirst c2 = recSet.Fields("cislo").Value If c1 <> c2 Then Err.Raise 1000, "Transaction test failed" End If
When I call Requery after RollbackTrans everything is OK, but what is then "Preserve on Abort" for?
Also I must call Requery after delete or I will get an error after MoveFirst. Do I miss something?
I am trying to execute a query on a table which is in 6.5 from 7.0
I get the following error...
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'SQLOLEDB' reported an error.
[OLE/DB provider returned message: The catalog stored procedures installed on server WEB_SERVER are version 6.50.193; version 07.00.0330 or later is required to support IDBSchemaRowset. Please contact your system administrator.]
Hello,
Can I use the "SQLOLEDB" provider to connect to a SQL Native Client? Follow-up question: does the "SQLOLEDB" provider use the same TDS transport protocol as the SQL Native Client provider?
Thanks as always!
dotBomb
I am remotely logging onto a MS SQL 6.0 server using sp_addlinkedsrvlogin.
When I try to query against the table on this server I get the following error
message:
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'SQLOLEDB' reported an error.
[OLE/DB provider returned message: The data source can not be used, because it DBMS version is less than 6.5.0.]
I know that 6.0 doesn't support OLEDB but shouldn't 7.0 be able to access this
using odbc. Do I need to do anything other than set up the dsn on odbc.
Any feedback on this would be great.
Cheers,
bhanly@apcc.com
I am having trouble logging into my sql server from an asp application using SQLOLEDB.
I am running XP, IIS5 and SQL Svr 2000 on my developement machine. I am able to log into the database using localhost/application.
When I port the code and database over to the server (Server 2003, IIS6, SQL Svr 2000), I am unable to connection using the actual url of the site.
I set the login up on the logins for the database manager along with password (using multi, not Windows authentication). Added that user to the database security logins, giving it dbo, srvr admin, etc. Like I said, works on my dev machine.
The SQLOLEDB request is Provider=SQLOLEDB;Data Source=(local);User ID=UID;Password=PWD;Initial Catalog=DBName.
I set the database up as a System DSN in ODBC, using SQL Server Authentication. The connection tests out just fine.
When I attempt to connect, I get an ADO message indicating that the user id that I supplied could not sign in to the server.
This is driving me nuts.
Does anyone out there have any ideas as to what I have missed on the server vs local developement machine?
Any and all help greatly appreciate.
Thx, Tom
if we see provider=sqloledb in the connection string of a legacy sql server 2000/2005 system we're trying to understand better, can we conclude that ODBC is definitely not in the client picture, that possibly OLEDB is and that SQL Native isnt? Can we conclude for sure what middleware must be in use?
My limited understanding of this "middleware" space is that ODBC is old and restrictive, OLEDB is a lot more state of the art and general, and that SQL Native is more proprietary than OLEDB.
Even if we can conclude what middleware must be in use, is it generally as simple as changing a connection string and ensuring installation of the preferred middleware in upgrading to better performing middleware?
Hey all, 2 questions.
Is there a way to 'refresh' the value of adodb.connection.state? and When my ado class reconnects after a dropped connection i still get connection failure errors.
I'm trying to make the connection b/n the my work's app and mssql server more 'robust'.
Our ado class tests the connection in the 'execute' method ie if connect() execute db task
.connect() is
IF this.loConnection.State = adStateOpen
*-- The connection is already open.
ELSE
create connection
ENDIF
return (this.loConnection.State = adStateOpen)
Now, this works fine when starting up the app, and everything runs fine, but *in theory* it should be able re-establish the connection at any time. So i kill the connection @ on the sql server while the app is running and try to perform a task that requires a db connection.
problem is that 'this.loConnection.State' is still equal to 1 even though the connection is no longer there.
It gets changed to 0 when the .execute fails but the failure is less than graceful... and although it reconnects (sp_who shows a new connection), it seems like the ado object is trying to connect using the old connection rather than the new one. command.activeconnection is set to the new connection in the .connect method so i dunno what's up.
Any ideas?
Hi,
I have a client application that creates a COM object using the program ID 'SQLOLEDB enumerator' to get an ISourcesRowset. Once I retrieve the ISourcesRowset, I call ISourcesRowset.GetSourcesRowset to obtain a list of available servers.
This works if the client computer (the one running the application) also has SQL Server (or SQL Express) installed. But on a clean computer after installing SQLNCLI.MSI, the call to GetSourcesRowset returns an error 80004005.
My question is, what do I need to install on my client's machines so I can retrieve available servers using this method? Is there another MSI that needs to be installed? Do I need to install SQL Express Client_Components? Or is there something else?
Thanks in advance for any information you can provide.
-Eric Harmon
When creating a connection string in ADO (using Delphi7), I insert the provider like this:
Provider=SQLOLEDB;Data Source=.;Initial Catalog=master;Integrated Security=SSPI;User ID=sa;Password=masterkey
Now, when I try to run this on a SQL Server 2005 or SQL2005 Express database, it won't create the connection
unless I use the SQLNCLI provider.
Is there a way to force them to use the OLEDB provider?
I have MDAC2.8-SP1 installed.
Windows Server 2003 R2 Enterprise x64 Edition service pack 1
SQL Server 2000 Enterprise edition 32 bit, SP4 : 2000.8.00.2039
jdbc driver: jtds
connection string: jdbc:jtdsqlserver://ZH-DATA-4:1434/[dbname];instance=[instance name]
the connectivity works fine...almost.
I have 2 identical sql servers one of which is linked to the other via a linked server config which for one particular query gives back the error I give in the subject of this thread:
java.sql.SQLException: Could not get the data of the row from the OLE DB provider 'SQLOLEDB'
if I run the exact same sql string in query analyser it runs with no problem.
if have similar queries also running from java which use the linked server and these do not give an error. I am at a loss as to explain why this is happening.
the query in question joins together a number of views which reference the linked server.
I have tried everything I can think of including recreating the views and linked server definition.
If all is OK in query analyser, how can it fail when called over jbdc (especially when all other db requests succeed) ?
I have SQL Server 2000 SP4 and i am using a link server which is also 2000 sp4. I am facing an interesting error which is
OLE DB provider 'SQLOLEDB' supplied inconsistent metadata while extracting the data.
FYI.
I am executing the dynamic query which uses another server to fetch the data.
Let me know if anyone can help me out to resolve this issue.
Thanks
Vishal
SQL2000 / W2K
I'm having issues with a query to a view that references a view on a linked server, that in turn references a view on a third server.
Query to view on Server A --> View on Server B --> View on Server C
I can query from A to B using the linked server.
I can query from B to C.
I can query from A to C.
All servers at the same location on the same domain.
I cannot query a view on A, that references a view on B, where the view on B references a view/table on C
Each linked server configuration uses "Be made using this security context", with the user specified being 'sa'. I was hoping to get security out of the equation for debug purposes, hence the sa use.
I have tried from Query Analyzer using both windows and sql auth.
MSDTC is running on all servers as local system.
The full error returned is:
Server: Msg 7391, Level 16, State 1, Line 1
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
Thanks for any support,
Chris
Hi All,
I am getting following Error:
Oracle linked server in SQL server 2005 to update tables in Oracle database.
I have used OPENQuery to update tables in Oracle from a SQL Server 2005 Stored procedure.
If we run query from sql management studio for inserting or updating table of linked server then it runs fine. But if we use Begin distributed transaction then its gives error -
Server: Msg 7391, Level 16, State 1, Procedure sp_test, Line 105
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
We are using Sql server stored procedure to run the open query syntax for updating oracle interface table.
Hi,
I am using the AutoFetch Option with Fast Forward Cursors with SQLOLEDB to access SQL Server 2005. This really works out but for the first I execute the query only.
But as I use parameterized statements, when I re-use the cursor, just re-binding new variables and re-executing it again, the AutoFetch does not work any more.
I noticed that thru the SQL Server Profiler. I see a sp_cursorfetch been called at the second time the cursor is re-executed.
Does anyone know how to work it out?
Thanks in advance.
Marcelo.
Server Error in '/' Application.
Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was reached. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidOperationException: Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was reached.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[InvalidOperationException: Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was reached.]
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +1188873
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +413
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
DataCaoZuo.Manage_ResultTB_Caozuo(String comstr) +145
Cls_UserManage.GetAllUserList() +18
Index.Page_Load(Object sender, EventArgs e) +83
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +15
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +34
System.Web.UI.Control.OnLoad(EventArgs e) +99
System.Web.UI.Control.LoadRecursive() +47
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1061
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
Ok bear with me here :). I have a server that is getting about 1000000 hits per day with about 10,000 unique vistors. For the past 2 months I have been revamping my code trying to deal with the increase in traffic. I have 2 boxes, one for the website, and one for the SQL. They are connected through a secure backlink so that I dont have to worry about encrypting the data. So the problem started when I updated the MDAC components a few weeks ago. I started getting these freaking timeout errors, they are up to about 1000 errors per hour. I have been monitoring the connection pooling using the system monitor for about a week and have noticed that I am not maxing out the pooling but I am still dropping connections. I went into the web.config and turned my max connections to 1000. Unfortunately this didn't even put a dent in the problem. It doesn't matter if I have 12 or 212 open connections it still drops them. I am at my wits end with trying to debug this problem. I am wondering if anyone else has had similiar problems recently. Also on a side note I have checked all my connections to make sure that I am closing them. Not only do I close my datareaders but I also set them to nothing. In addition to closing and reseting my datareaders I am also disposing and reseting my connection objects as well as closing them. Any help would be greatly appreciated.
Thanks,
Daniel Christoffersen
Hey,
From time to time i get this error "Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding." so I tried to change the connection string by adding thie following "Connect Timeout=200; pooling='true'; Max Pool Size=200" but still it is giving the same error! so why is this happening ? and what can I do!
btw the timeout expired happens when a stored procedure is executed at the Fill method !
Thank you in advance
Hiba
Hi All,
I am facing a problem in SQL Server 2005 and the .NET Environment. I have an SP, which will return me the result within fraction of second when i execute it in SQL Server Management studio. But randomly (Frequently), its giving timeout when i execute it from .NET Envirnment.
If i execute it at that same time in Management studio, i am not getting the error. But getting the Timeout when i execute it in the Server Explorere of VS 2005 or in the Application which uses it.
Can any one figure out the solution.
Hi Team Iam working in a asp.net web application. In my system i have installed the xp as os and the in my network is of 2003 server. All files and database are there. But when me accessing the files from my laptop it shows the error as follows Timeout expired. The timeout period elapsed prior to completion of the
operation or the server is not responding.Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: Timeout expired. The timeout period
elapsed prior to completion of the operation or the server is not
responding.Source Error:
Line 19: con = New SqlConnection(constring)Line 20: If con.State = ConnectionState.Open Then con.Close()Line 21: con.Open()Line 22: cmdobj = New SqlCommand(query, con) Source File:
Y:Inetpubwwwrootsreeskybuilderssreeskybuildersdbmain.vb Line:
21 If me accessing that same from that mechine there were no errors and i can go thru that program successfully. So please help me to do access the db from anywhere in my network Thanks Rajesh.C.S
Hi!
I am having a problem with my windows app in VB.net. I am just trying to do a very simple select command to retrieve some data. I am using a hosting server with a VPN.
When i click on the button it keeps giving me the error above. When I use server management express to do the same query it works fine and relatively fast.
So I have tried setting the CommandTimeout to 120 but when it stops, the debugger shows that the value of the COmmandTimeout is 30, although it stops after about 15 secs.
I am really lost and would need some help please! Find my code underneath.
Private Sub RetrieveButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles RetrieveButton.Click
'Create a connection string to connect to the database. Associate it to a connection object.Dim connString As String = "Data Source=192.168.24.75;Initial Catalog=edenoverseasproperty;" & _
"Integrated Security=SSPI;User ID=edenoverseasproperty;Password=blossomcar"
'Dim connString As String = "Data Source=JPCHENOTSQLEXPRESS;Initial Catalog=EdenOverseasProperty;" & _
' "Integrated Security=SSPI;User ID=sa;"Dim sqlConn As New SqlConnection(connString)
'Create a new command and associate the connection object to it.Dim cmd As New SqlCommand()
cmd.CommandTimeout = 120
cmd = sqlConn.CreateCommand()
'Define the command type and the source
cmd.CommandType = CommandType.Text
cmd.CommandText = "SELECT * FROM Clients"
'Create a data adapter and a datasetDim da As New SqlDataAdapter()Dim ds As New DataSet()
da.SelectCommand = cmd
da.Fill(ds, "Clients")
'Bind the data to the datagrid
EdenDataGridView.DataSource = ds
EdenDataGridView.DataMember = "Clients"
End Sub
Jean-Philippe
HI,
I am getting this error on web server. My Appication is working fine on my Local Network where DB server and web server are on different machine. But getting TimeOut on web server. I tested the query on Query Analyzer it takes hardly 3 sec (Max) to execute. There is only Select query and total number of records are around 2100 which is not a big data.
I have used Connect Timeout = 180 in connection string which is also not effective.
please tell me how can I handle this exception.
We've been having timeout problems.
In our development environment we have IIS and SQL Server 2005 both running on the same box. We use VWD or our dev server's IIS to run the apps.
What happens is the database stops responding to our web applications and we continue to get the timeout error. I can still execute queries from Management Studio but all of the web apps all timeout.
Then, the only was we can get the database to start responding again is if we restart the SQL Server service.
Any ideas as to why the database would stop responding to all of the web apps but not Management Studio? It tends to happen a couple times a day when we are developing. Only the other developer and myself use the DEV environment.
Hi Dear,I have some problem.Problem Is:
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.I have two table.1. BlogUrl2.HistoryBlogstable BlogUrl has approximate 30 url(some part of url).and table HistoryBlogs has approximate 2,00,000(2 lac) record.table history blog has a colon blogUrl and a colon subject name.when a user select one url from blogUrl table then display all subject related to blogUrl.it's ok.but i want select all blogUrl related subject.my query is:SSELECT distinct S.subject_id as 'id', cast(S.subject_raw as varchar(8000)) as 'subject' FROM HistoryBlogs S where substring ( cast(S.blog_url as varchar(8000)), charindex('/',cast(S.blog_url as varchar(8000)))+2, charindex('/', substring ( cast(S.blog_url as varchar(8000)), charindex('/',cast(S.blog_url as varchar(8000)))+2, len(cast(S.blog_url as varchar(8000) ) ) ) )-1 ) IN
('-' , 'discussions.apple.com' , 'feeds.gawker.com' ,
'legalalan.blogspot.com' , 'real.estatez.net' , 'szeteng.blogspot.com'
, 'willdo.philadelphiaweekly.com' , 'www.beginnertriathlete.com' ,
'www.bestbuy.ca' , 'www.bestbuy.com' , 'www.binsearch.info' ,
'www.centennialcollege.ca' , 'www.chatsusa.com' , 'www.dvinfo.net' ,
'www.feedhub.com' , 'www.futureshop.ca' , 'www.libble.com' ,
'www.mcdonalds.com' , 'www.monova.org' , 'www.net-security.org' ,
'www.osnews.com' , 'www.senecac.on.ca' , 'www.shop.com' ,
'www.sumotorrent.com' , 'www.theimpulsivebuy.com' ,
'www.tomshardware.com' , 'www.wal-mart.ca' , 'www.walmart.com' ,
'www.xbitlabs.com') group by S.Subject_Id,cast(S.Subject_Raw as
varchar(8000))This query is ok.but when we want select all blogUrl.then i found above mention errori have asp.net 2.0 and sql server 2000.this type problem i am facing on remote serverPlease help me.Yogesh Saini