Connecting Execute SQL Task With Firebird Connection Manager
Jun 18, 2007
Hi,
I'm using Integration Service between Firebird and MS SQL 2005. I can able to move data from Firebird db tables to MS SQL db tables using DataReader source (Firebird Connection Manager) and SQL Server Destination (SQL Server Connection Manager) component.
Now I want to execute parametrized SQL statement to fetch data from Firebird DB using Execute SQL Task Component. In this process while trying to set Connection property to this component I can able to view only MS SQL Connection Manager and it is not listing Firebird Connection Manager.
Now I need a help to get connect this Execute SQL Task component with Firebird connection Manager. Help me to find out where I'm making mistake.
Dts.Connections.Item("myADO.NET connection").AcquireConnection(Nothing)Dim conn As New SqlClient.SqlConnection(Dts.Connections.Item("myADO.NET connection").ConnectionString) conn.Open()
This seems silly, in that I'm not really using the same connection, but using the connection string of a connection that already exists. And, for my purposes, it's not working currently, because I've switched from Windows Authentication to SQL Auth... and the password isn't coming over in the ConnectionString property.How do I re-use the exact same ADO.NET connection I have in my connection manager in a script task? That's the recommended way to go, right?
When I try to create an SSIS package with an FTP task, it always fails to compile with the messages:
Error at Package: The connection "" is not found. This error is thrown by Connections collection when the specific connection element is not found. Error at FTP Task [FTP Task]: Connection manager "" can not be found. Error at FTP Task: There were errors during task validation. (Microsoft.DataTransformationServices.VsIntegration)
The item is marked with a circled-X. The tool-tip also agrees: The connection "" is not found.
Using my recreation steps below, I am setting up a connection manager, but it is never found at compile time.
1. Open BIDS, select a new Integration Services project. 2. Drag an FTP task from the toolbox to the Control Flow window. 3. Double-click the FTP task. 4. On the FTP Task Editor window, General page, pull down the FTPConnection property. 5. Select <New Connection...> 6. On the FTP Connection Manager Editor window, enter the servername, port, username and password. 7. Click "Test Connection" to verify connectivity. (It succeeds.) 8. Click OK on the FTP Connection Manager Editor window. 9. Click OK on the FTP Task Editor window.
I'm not using a configuration file or logging provider for this example. I have also installed SP2 + cumulative update 2.
I am running into issues with custom objects interaction with visual studio 2005.
1. Custom connection manager. I am setting the name of the connection manager ( to standardize naming convention ) that user created, however when the CM is created, the name displayed in visual studio is still the default name even if the real name is the one i set. I have to do things like, edit it or save package - close - reopen, create another connection, ... etc in order to get it refreshed.
2. Custom Task I am managing some variables in this custom task so that I will be adding and deleting variables in the package. The challenge i am running into is, when I added 2 variables for example, even though the variables are successfully added to package, the Variable Window in visual studio designer will not reflect the new variables. I have to save package, close, and re-open in order for the variables to show up.
So this brings to my question - is there any way to tell Visual Studio programmatically to refresh the contents of these 2 sections, 1 is the Variable Window and the other is the panel containing the list of connection managers.
I have been searching around and found some clue about visual studio SDK but I still cannot find an exact way of doing it. Visual Studio SDK example tells you how you can access the Variable window as
We have an SSIS job that runs once a day and sends emails. For security reasons, IT switched the send-mail porton the smtp server from 25 to a different number (let's say 1234).
So, I changed the SSIS SMTP Connection Manager's smtpServer string to smptserver:1234
However, this does not seem to be working. I keep getting 'Send Mail Failure' error.
Any ideas how to set the port number for sending emails using SSIS?
I am trying to figure out how to override the column delimiter from a script task for a flat file connection.
Before outputing the data into a file, I have a variable which contains the delimiter to be used... but as it seems that this property cannot be changed through an expression, I assume it has to be done throught code...
However, the connectionmanager object doesnt seem to have the delimiter as an available property.
I have a simple parent package that calls 3 small simple child packages (child1, child2, and child3). Each child package does nothing but contains a FlatFile connection. I run these 3 child packages in parallel inside parent package. The parent package fails sometimes (i.e. sometimes success, but sometimes failed). And the failure is replicable.
I would like to send you all of 4 simplest packages via email if anyone is interested in helping out.
Error: 0xC0014005 at : The connection type "FLATFILE" specified for connection manager "_MedicalClaimServiceLine_070713_161742152820" is not recognized as a valid connection manager type. This error is returned when an attempt is made to create a connection manager for an unknown connection type. Check the spelling in the connection type name.
Error: 0xC0010018 at : Error loading value "<DTS:ConnectionManager xmlns:DTS="www.microsoft.com/SqlServer/Dts"><DTS:Property DTS:Name="DelayValidation">0</DTS:Property><DTS:Property DTS:Name="ObjectName">_MedicalClaimServiceLine_070713_161742152820</DTS:Property><DTS:Property DTS:Name="DTSID">{CA12C" from node "DTS:ConnectionManager".
Error: 0xC00220DE at child2: Error 0xC0010014 while loading package file "C:SSISDasLoaderchld2.dtsx". One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.
.
Task failed: child2
Warning: 0x80019002 at parent: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Information: 0x40016042 at chlid3: The package is attempting to configure from the parent variable "z".
Information: 0x40016042 at child1: The package is attempting to configure from the parent variable "x".
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
I haven't been able to successfully use the ADO.NET connection type to use both input and output parameters in an execute sql task containing just tsql statements (no stored procedure calls). I have successfully used input parameters on their own but when i combine it with output parameters it fails on the simplest of tasks.
I would really find it beneficial if you could use the flexibility of an ADO.NET connection type as the parameter marker and parameter name can be referenced anywhere throughout the sql statement in no particular order. The addition of an output parameter would really make it great!!
I am using SSIS 2005 on Windows 2003 server. Using Excel Source to dump the data for staging database. I am getting following error while I execute it through BI studio's execute button.
I have deployed my packages into Sql Server and I am using Configuration File. As my Data Source is Excel, I have changed the connection string during deployment with Server Path. But I am getting the following errors. Actually the File Exist in Path. May I know What is cause of the issue? Do I need to give any permission to execute the package.
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
component "Excel Source Service Contract Upload" (1) failed validation and returned error code 0xC020801C.
One or more component failed validation.
There were errors during task validation.
DTS_E_OLEDBERROR, Error Code: 0x80004005 Source: "MS JET DB Engine" Description : Path is not valid
I have a simple SSIS package with three "Execute SQL Tasks". I am using ADO.Net Connection to execute SPs on a DB server.
When I execute this package It works fine. So far so good.
Now, I need to implement transation on this package. And problem starts now onwards. When I try to execute package after setting TransationOption = Required for the Sequence container which contains all the tasks, I get following error.
[Execute SQL Task] Error: Failed to acquire connection "NYCDB0008.Export". Connection may not be configured correctly or you may not have the right permissions on this connection.
"NYCDB0008.Export" is the name of the ADO.Net connection. I have been hunting for any solution but all in vain. I have tried changing all DTC settings on the dev as well as Database server.
Getting Access Denied To FileName Error When Using the Execute Sql Task (With File Connection) into a Foreach Loop Container.
Please Note :
I have a folder containing .sql files. I have to dynamically loop through the files and send them as a File connection Folder to the Execute Sql Task.
When I run this Package I am getting the follwoing error :
[Execute SQL Task] Error: An error occurred with the following error message: "Access to the path 'C:ProjectsFuzzy Lookup DataFlow ExampleScripts' is denied.".
Also I have logged in to the machine as Administrator and to Sql Server with sa.
OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
I am working on SQL Server 2005 (x64) with Windows Server 2003 (x64) operating system. I am having a major issue in SSIS. Here is the detailed explanation of the issue :
I have an EXCEL file in 2003 / 2007 version. It contains some data. I want to import the data using SSIS into SQL Server 2005 (x64) database table. I have taken "EXCEL FILE SOURCE" and "SQL Server DESTINATION". It was failed on importing data. Surprisingly it works fine in SQL Server 2005 (x32). Can you please explain why it is NOT woking on (x64) ?
Here is the error code i am getting:
[Excel Source [1]] Error: The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.
I have an SSIS package that I need to modify. It was developed in Visual Studio 2005 and runs faithfully in production on SQL Server 2005. Suddenly, I can't open the package on my own workstation. I see a big red "X" image and a message stating "Microsoft Visual Studio is unable to load this document." The real reason the document can't be loaded appears to be:
Error loading DataWarehouseLoader.dtsx: The connection type "OLEDB" specified for connection manager "Warehouse Logging OLE DB" is not recognized as a valid connection manager type. This error is returned when an attempt is made to create a connection manager for an unknown connection type. Check the spelling in the connection type name.
Does anyone know what causes this and what I can do? The package has been in production for 9 months and I've never seen this problem before.
I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :
Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".
So this confused me, any one has any experience on this?
I'm looking for a way to refer to a package variable within any Transact-SQL code included in either an Execute SQL or Execute T-SQL task. If this can be done, I need to know the technique to use - whether it's something similar to a parameter placeholder question mark or something else.
FYI - I've been able to successfully execute Transact-SQL statements within the Execute SQL task, so I don't think the Execute T-SQL task is even necessary for this purpose.
I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?
I am using SQL 2005 SSIS. I am joining several large tables and then the move result into another table in the same database.
I would like know which method is faster:
Use Execute SQL Task to insert the result set to the target table
Use the Data Flow Task to insert the result set to the target table. (Use OLE DB source to execute SQL command and then use the SQL destination) Could you tell me why then other is slower?
I have a SQL Task that calls a stored procedure and returns an output parameter. The task fails with error "Value does not fall within the expected range." The Stored Procedure is defined as follows: Create Procedure [dbo].[TestOutputParms] @InParm INT , @OutParm INT OUTPUT as Set @OutParm = @InParm + 5 The task uses an OLEDB connection and has a source type of Direct Input. The SQL Statement is Exec TestOutputParms 7, ? output The parameter mapping is: Variable Name Direction Data Type Parameter Name User::OutParm Output LONG @OutParm
In the Control flow tab, I have an Execute SQL Task that outputs full Result set into a variable of an object type. Now how can I write the contents of the Full Result Set into a text file using Script Task. I also want to format the following way while I output into a file:
Column Name 1 : Column Value
Column Name 2: Column Value and so on
I tried writing the contents of the Object Variable into a file, but the file had an output of single word: System.__ComObject.
Code for Writing the Full Result Set into a Text File
Dim RSsqloutput as String = Dts.Variables("objVariable").Value.ToString
Dim strVal as String = "File completed on " & Now() & vbCrLf & "------------------------------------------------------" & vbCrLf
I have an application like fetching records from the DataBase(MS Access 2000) and results i have to use in Script Task. At present i have used the record fetching query,connection string in Script itself. I would like to use in Independently. Is there any Tools like (Control Flow Tools like Execute SQL Task) are there to fetch the result set from Acccess and can use the fetching results in Script Task....
I have a SSIS package contains an "Execute SQL Task". The SQL will raise error or succeed. However, it sounds the package won't pick up the raised error?
Or is it possible to conditional run other control flow items according the the status of SQL task execution?
For first time I'm testing this task and surprisingly, when I try "Edit Package" option:
1)The DTS host failed to load or save the package properly 2)The selected package cannot be opened 3)Error HRESULT E_FAIL has been returned from a call to a COM component
But after these messages you can see all the tasks but they haven't name!!
It seem as if RCW mechanism has failed between managed and unmanaged coded-partially.
I don't dare to follow doing more stuff, I don't know if that package is well-loaded or not from there. ?¿
I have a package that uses a for loop to iterate through an unknown amount of excel files and pull their data into a table. However, there will be cases when the file is corrupted or has some sort of problem so that either the transformation will fail or the excel data source will fail with an oledb connection error. Could anyone suggest a clean way to trap these errors? Specifically, the "Cannot Aquire Connection from Connection Manager", which is the excel connection.
I added a connection (ADO.NET) object by name testCon in the connection manager - I wanted to programmatically supply the connection string. So I used the "Expressions" property of the connection object and set the connectionstring to one DTS variable. The idea is to supply the connection string value to the variable - so that the connection object uses my connection string.
Then I added a "Backup Database Task" to my package with the name BkpTask. Now whenever I try to set the connection property of BkpTask to the testCon connection object, by typing testCon, it automatically gets cleared. I am not able to set the connection value.
Then after spending several hours I found that this is because I have customized the connection string in testCon. If I don't customize the connection string, I am able to enter the "testCon" value in the connection property of the BkpTask.
I'm trying to connect to an Oracle Database because I want to make a connection for my datasource in Analysis Manager. I have a servername, an user-id and a password. When I try the connection in SQL+, it works but when try it in Analysis Manager I get an error: "Test connection failed because of an error in initializing provider. Oracle error occured, but error message could not be retrieved from Oracle."
My provider is an "MS OLE DB provider for Oracle" because it is an oracle database I have to connect to.
I am having trouble connecting to a new box we just setup using Enterprise Manager from my workstation. I can still connect just fine to our first server. I checked network protocols, etc... on the server and in client configuration. Any ideas? Thanks.
In Visual Studio, I am able to create a report( rdl file) and shared datsource ( rds file) connecting to Oracle using Oracle Client 9i. I can run the queries from within the visual studio but when I deploy to Report Manager and try running it, I am getting the error shown below. I opened the datasource associated with the rdl in RM and verified that the connection String is same as the one in Visual Studio. Where could I possible go wrong? Any pointers will be highly appreciated.
Thanks Phewa Taal
An error has occurred during report processing.
Cannot create a connection to data source 'testDS'.
ORA-12154: TNS:could not resolve the connect identifier specified
