Connecting Surface Area Configuration To Server On Clustered Server
May 8, 2006
I've run into a problem after upgrading production servers running under Microsoft Cluster Server, Windows Enterprise Server 2003 SP1, and SQL Server 2005 SP1 Enterprise Edition.
Once I completed the upgrade and applied the patch, I needed to examine the values set in the Features component of the Surface Area Configuration tool. The tool attempts to connect to localhostinstancename, but reports the following error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error:26 - Error Locating Server/Instance Specified)(Microsoft SQL Server)
I'm logged into the virtual server via Remote Desktop, but the SAC tool thinks I'm logged into the physical server supporting the virtual server. I seem to be caught between a rock and a hard place here, as I can't enable remote connections without first gaining access on the server itself.
Any help will be greatly appreciated.
View 3 Replies
ADVERTISEMENT
May 2, 2007
I have just finished installing SQL 2005 Ent Edition on Win 2000 Adv Server, SQL2005 SP2, and SP2 Hotfix KB934458. After the installation, I could see and configure all services via SQL Configuration Manager and SQL Server Surface Area Configuration tools. This worked for a couple of days and now both configuration tools no longer detect SQL2005 components. SQL Server Surface Area Configuration issued an error that said "No SQL Server 2005 components were found on specified computer. Either no components are installed, or you are not an administrator on this computer. (SQLAC)". SQL Configuration Manager did not list any installed services. I don€™t know what caused this. Anyone has any idea? Please help! Below is the Installation Report which shows installed components.
===================================
The following components are installed on this server
DEV
Analysis Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Database Engine
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Reporting Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
QA
Analysis Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Database Engine
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Common components
Integration Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Notification Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Workstation Components
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
===================================
View 1 Replies
View Related
Jul 19, 2007
I am currently running a Windows Vista Enterprise OS platform using SQL Express, whenever i add a user to the administrator group using the SQL Server Surface Area Configuration UI, each time i click on the link to add New Administrator, the previous administrator i just added still appears on the left - just as if i never added this user previously.
Is there a way around this issue? or is this a SQL Express problem, because i also tried doing it with SQL Server Enterprise edition on a Win2K3 SP2 box and it gives the same results.
Feedback is greatly appreciated.
Thanks
View 1 Replies
View Related
Nov 9, 2006
Sorry for the annoying. I would like to the configuration settings for the surface area. There's an option which able to let us change computer (whether is local computer or remote computer). Let say I put my own computer's name (Hans as example) for configuration as the remote compute, it's work fine to me. However, if I put my remote computer's name, it displays this error message to me.
Error :
Computer Tomato does not exist on the network, or the computer cannot be configured remotely. Verify that the remote computer has the required Windows Management Instrumentation components and then try again.
I am sure that the remote computer is working since I am able to ping the remote computer and test on telnet as well. But why it seems that surface area can't detect my remote computer. Hope can get some resistance from everyone here. Thanx alot.
Best Regards,
Hans
View 1 Replies
View Related
Feb 29, 2008
I was studying the SQL Server 2005 Surface Area Configuration tool to see how i could increase security.
I cannot find some of the components in “Surface area Configuration of Features�.
For example DAC appears to be missing. This is a dedicated administrator connection that allows an administrator to connect to a server.
Is this because I have SQL 2005 express instead of the professional version or could it even be to do with the operating system (XP home)
Only the following components are listed under "Database Engine":
Ad Hoc Remote Queries
CLR Integration
Native XML Web Services
OLE Automation
Service Broker
Xp_cmdshell
Thanks
View 1 Replies
View Related
Feb 18, 2008
hi ; everybody
i have almost installed sql server 2005 enterprise edition on windows xp sp2 and i havent connected to any server .i have taken error:40 with my all attempts.tcp/ip protocol have been enabled on sql server configuration manager.i have tried to start sql server surface area configuration but every my attempt have been resulted a fault which is below.
[No SQL Server 2005 components were found on the specified computer. Either no components are installed, or you are not an administrator on this computer. (SQLSAC)]
i dont suppose that i did something wrong when i setupped.because i read every article on the internet about how to make setup.also; i setupped numbers of times on my pc.
but i didnt accomplished.
i thank for any help.please; give your solution explicitly.
View 8 Replies
View Related
Apr 14, 2008
Dear All,
i'm trying to publish a maintenance plan in sql server 2005.
but soon after right click and selecting a new maintenance plan, it is displaying an alert with "AgentXP's component" is turned off.
please let me know how to ON those services. i've read and followed the instructions but i was unable to find where exactly to start.
please guide me in this regard
my version of OS is sql server 2000 professional
my version of sql server is :Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
Vinod
Even you learn 1%, Learn it with 100% confidence.
View 1 Replies
View Related
Feb 28, 2007
Hi, we are having a strange problem when trying to configure the surface area of my sql server 2005. When we open the tool the only nodes that appears are: Reporting Services and Integration Services. But the Database Engine node is not showing. What do we have to do to access the Database Engine node and configure Remote Connection.
Any help would be extremely appreciated...
View 12 Replies
View Related
Apr 16, 2008
Up til now i've been working with Access, i have only got a few weeks experience with SQL, so dont eat me.
I set up a SQL Database, and placed it into my site, etc, set up all the connection strings. It connects fine, but cannot log in. It tells me;
Cannot open database "C:USERSJAREDDESKTOPSTYXSTYX - BUILD 2APP_DATASTYXDB.MDF" requested by the login. The login failed.Login failed for user 'Webdev01Jared'.
I'm running Vista (x86), and SQL Server 2005 Express SP2, and i'm aware that Vista by default does not automatically enable remote access in SQLExpress for local admins.
So i go into Surface Area Configuration. I've read about it, and it's two steps, Click "Add New Administrator", then select the priveleges in the left box and click the button to put them in the right box. Simple enough, and it works, sure, click the button, it moves across, done.
But. Hit OK. It's done nothing, i still cant connect, and the cherry on top; open up the SAC again to check and there is nothing in the right box. It's exactly how it was before i changed it. The problem is definitely this, and not the account, as i can log in for SQL Management Studio just fine, with the same windows authentication credentials.
Thanks in advance.
View 3 Replies
View Related
Dec 14, 2006
Hi Dear
I have been trying to add SQL database to my web application and have to configure the SQL to allow remote accee.
I would like to start the Database Engine Service when I click on start button to start the service it dissplay following message:
An error occurred while performing this operation
Severa; time I restart the computer still, When I try it is same problem.
thank for yout help.
View 3 Replies
View Related
Feb 5, 2008
I want to send mails from SQL Server 2005 Management Studio Express for which I referred to the article at http://www.databasejournal.com/features/mssql/article.php/3626056. I could successfully do the steps from step 1 to step 6 listed at the above URL. In fact, when I sent a test mail (as cited in step 6), SQL Server displays the message Mail queued though the mail didn't get delivered. The mail server address I am using is smtp.mail.yahoo.co.uk.
But when I expand the Management node in the Management Studio Express GUI, I don't find Database Mail as a child node. In fact, there are only 2 child nodes under the Management node - SQL Server Logs & Activity Monitor.
Why isn't Database Mail listed under the Management node? What am I missing here?
Also when I open Surface Area Configuration & then click Surface Area Configuration for Services and Connections, the following error gets generated:
Computer localhost does not exist on the network, or the computer cannot be configured remotely. Verify that the remote computer has the required Windows Management Instrumentation components and then try again. (SQLSAC)
Additional Information:
The type initializer 'System.Management.ManagementPath' threw an exception. (System.Management)
Unable to cast COM object of type 'System.Management.WbemDefPath' to interface type 'System.Management.IWbemPath'. The operation failed because the QueryInterface call on the COM component for the interface with IID '(38C15AF2-736C-477E-9E51-238AF8667DCC)' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)). (System.Management)
When I click Surface Area Configuration for Features, it generates the error cited above but from the first bulleted list.
How do I overcome this error? I confirmed that Windows Management Instrumentation is running by opening Services from Control Panel ---> Administrative Tools.
I am on WinXP Pro SP2. Please note that I also have SQL Server 7.0 installed in my machine which is a standalone m/c.
Thanks
View 1 Replies
View Related
Oct 4, 2005
Hello, I've installed SQLServer2k5 Sept CTP with the following config: W2K SP4 Pro, SQL2K5 Std Sept CTP complete clean install. Everything works except SAC for features. I get the error below when trying to start it. SAC for Services & Connections connects without problem and has local & remote connections via both TCP/IP and Named Pipes enabled for the server, and local & remote connections enabled for analysis services. All SQL2K5 components & services are started in the Services control panel. I've looked at port useage, wondering if some other process is using the port that SAC for features is pinging, but since SAC for Services & Connections works fine that doesn't seem to be culprit.
I also get an error when running the Tuning Advisor, saying it can't connect, but demoted that to just a warning by closing some extraneous connections to the servere (had >10 open). Still get a warning, but it doesn't prevent the Tuning Advisor from completing.
I've tried turning on and off various services, from Remote Registry Service to IIS, but no luck. Anyone know what else I chould check to troubleshoot this? Thanks!
Failed to connect to server localhost
View 1 Replies
View Related
Feb 13, 2008
Hello all, I hope someone can help me with this.
This is a new SQL Server 2005 cluster that we just installed for the first time, with SP2. I am trying to use a stored procedure with xp_cmdshell to run a script to backup the databases. I get the following error: locked access to procedure 'sys.xp_cmdshell' of component 'xp_cmdshell' because this component is turned off as part of the security configuration for this server. A system administrator can enable the use of 'xp_cmdshell' by using sp_configure. For more information about enabling 'xp_cmdshell', see "Surface Area Configuration" in SQL Server Books Online.
So I started Surface Area Configuration on the local SQL Server itself, and clicked on "Surface Area Configuration for Features". I then got the following error:
"Failed to connect to localhost. (Mirosoft.SqlServer.ConnectionInfo)
Additional information: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)
I am logged onto the server as a user with Admin privs; I installed SQL Server using that id. I am logged in via remote connection, so I know it allows remote connections... and I am logged into the server itself when I try to run the tool, so I don't understand why it's saying that it's trying to connect remotely.
Has anyone else ever experienced this problem? Thanks for any help you can give.
Best, Amy
View 13 Replies
View Related
Jun 8, 2008
The operation system is windows xp, and before i installed the SQL SERVER2005 the SQL SERVER2000 had installed.
the course of installing the SQL SERVER2005 has no error at all.
but i can not find the Database Engine under MSSQLSERVER from surface area configuration
==============
thank you in advance for any help
View 2 Replies
View Related
May 9, 2007
I installed SQL Server 2005 Enterprise Edition (64-bit) and then applied SQL SP2. When I launch the "SQL Server 2005 Surface Area Configuration" and choose "Surface Area Configuration for Features" I'm trying to enable xp_cmdshell.
After ticking the checkbox, and clicking Apply, I receive the error below. Anyone have any ideas on how to fix this?
===================================
Alter failed. (Microsoft.SqlServer.Smo)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Alter+Configuration&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.ConfigurationBase.Alter(Boolean overrideValueChecking)
at Microsoft.SqlSac.Public.Smo.SetSetting(Credentials credentials, DatabaseFeature feature, Int32 value)
at Microsoft.SqlSac.MainPanel.UserControlSSxp_cmdshell.ProcessOK(HashKey givenKey, String machineName)
at Microsoft.SqlSac.MainPanel.FormFeatures.commitDBChanges()
at Microsoft.SqlSac.MainPanel.FormFeatures.commitChanges()
===================================
Could not load file or assembly 'Microsoft.SqlServer.BatchParser, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Common.ServerConnection.GetStatements(String query, ExecutionTypes executionType, Int32& statementsToReverse)
at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType)
at Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQuery(String cmd)
at Microsoft.SqlServer.Management.Smo.ConfigurationBase.DoAlter(Boolean overrideValueChecking)
at Microsoft.SqlServer.Management.Smo.ConfigurationBase.Alter(Boolean overrideValueChecking)
View 7 Replies
View Related
Jan 26, 2007
Hi,
I'm posting this in the Setup forum as I think the problem relates to my SQL Server Configuration. Being new to server management pls ask for more info if I don't explain this clearly enough, I'm running out of idea.
Here's the set up:
Windows Server 2003 Web Edition SP2
SQL Server 2005 Enterprise Edition SP1
When I try to run apps I get the following message:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
I've found some great notes on the TechNet forums explaining this error and how to resolve it by configuring the Surface Area Tool... remote connections etc
But, this is where I draw a blank as I cannot access the Surafce Area Configuartion for Services and Connections because certain components are not installed, or I do not have admin rights. I definitly have the admin rights, but have no idea where to start looking for aforementioned components.
During the SQL Server install I recevied the warning:
SQL Service Edition System Compatibility - Some components of this edition of SQL Server are not supported on this Op system.
It sounds pretty generic and doesn't offer anymore details, but could this be effecting it?
I've also noticed that when I open SQL Server Configuration Manager and click on SQL Server 2005 Services nothing appears in the right-hand panel??? I'm sure there should be???
I've been all over TechNet & Books online and cannot find any reference for what I'm experiencing.
Any help or guidance will be greatly appreciated!
Thanks!
View 1 Replies
View Related
Jun 29, 2007
Being very new to SQL Server, I have to ask - when I try to connect to SQL Server 2005 using TCP/IP I cannot. To accomplish this I was directed to use the Surface Area Configuration utility.
When I do this, I do not see the Database Engine the docks reffer to - any help/comments/suggestions?
Thanks,
Chris
View 1 Replies
View Related
Mar 18, 2008
I get this problem when tryoing to connect to the surface area configuration for services & connections
As well as for features.
However I can connect via another computer and change the options accordingly but I just can't do it locally from the server ?
Does any one know why please, the links in the message don't help ?
===================================
An exception occurred in SMO while trying to manage a service. (Microsoft.SqlServer.Smo)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.InnerWmiException&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.Wmi.WMIProxy.ExecProcess(Object request)
at Microsoft.SqlServer.Management.Smo.Wmi.WMIProxy.ProcessRequest(Request req)
at Microsoft.SqlServer.Management.Smo.Wmi.WmiSmoObject.EnumChildren(String childTypeName, WmiCollectionBase coll)
at Microsoft.SqlServer.Management.Smo.Wmi.ServiceCollection.InitializeChildCollection()
at Microsoft.SqlServer.Management.Smo.Wmi.ServiceCollection.get_Count()
at Microsoft.SqlSac.MainPanel.FormFeatures..ctor(String machineName, Form callingForm)
===================================
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Smo.Wmi.WMIProxy.ExecProcess(Object request)
===================================
------------------------------
Program Location:
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
at Microsoft.SqlServer.Management.Smo.Wmi.WmiBase.BuildDataTable(ManagementObjectCollection listManagementObject)
at Microsoft.SqlServer.Management.Smo.Wmi.WmiBase.BuildResult(ManagementObjectCollection listManagementObject)
at Microsoft.SqlServer.Management.Smo.Wmi.WmiBase.GetData(EnumResult erParent)
at Microsoft.SqlServer.Management.Smo.Environment.GetData()
at Microsoft.SqlServer.Management.Smo.Environment.GetData(Request req, Object ci)
at Microsoft.SqlServer.Management.Smo.Enumerator.GetData(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
Hmm A tad strange.
View 3 Replies
View Related
Aug 24, 2006
Hello,
How do I restore a sql database that is on a clustered server from a sql database backup file that is on a non_clustered server?
Thanks,
Serey
View 3 Replies
View Related
Jan 4, 2008
I have large table with 10million records. I would like to create clustered or non-clustered index.
What is the quick way to create? I have tried once and it took more than 10 min.
please help.
View 1 Replies
View Related
Sep 22, 2007
I am getting following error when trying to install SQL express 2005 on XPSP2.
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
The SQL Server System Configuration Checker cannot be executed due to WMI configuration on the machine SIGMA-805539A79 Error:2147944122 (0x800706ba).
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=setup.rll&EvtID=70342
I tied re-installing WMI using http://blogs.msdn.com/jpapiez/archive/2004/12/09/279041.aspx link but could not get it working.
Do i need IIS installed? Its not installed on this box...
please suggest something... i am stuck...
Thanks,
View 3 Replies
View Related
Feb 4, 2015
We have a table, which has one clustered index and one non clustered index(primary key). I want to drop the existing clustered index and make the primary key as clustered. Is there any easy way to do that. Will Drop_Existing support on this matter?
View 2 Replies
View Related
Jun 25, 2015
I have a requirement to only rebuild the Clustered Indexes in the table ignoring the non clustered indexes as those are taken care of by the Clustered indexes.
In order to do that, I have taken the records based on the fragmentation %.
But unable to come up with a logic to only consider rebuilding the clustered indexes in the table.
create table #fragmentation
(
FragIndexId BigInt Identity(1,1),
--IDENTITY(int, 1, 1) AS FragIndexId,
DBNAME nvarchar(4000),
TableName nvarchar(4000),
[Code] ....
View 5 Replies
View Related
Aug 18, 2015
I'm working to test out a recovery scenario involving a SQL 2008 R2 2 node cluster. I want to restore it to a standalone server. The nodes are VMware VMs using physical RDM for the shared storage. Using Veeam as the backup tool. Veeam doesn't work with physical RDM so I'm dumping the databases (all Simple) elsewhere to be picked up and replicated with Veeam. No problem there. For my DR I have a vanilla 2008 R2 server being replicated so that I can use it as a base to restore SQL. So far the testing has worked ok. What I'm trying to learn is the best way to restore the cluster to the standalone server and have it look the same to the affected app servers. Â
The cluster has several instances. In my testing, I've recreated the instances, but I don't think they show up as they do on the cluster. For example, if the Windows server name is SQL01, and I install an instance called SQL-APP, SELECT @@servername while connected to the instance still shows SQL01 but in production it shows SQL-APP. What do I need to do to get everything to match up? I suspect that, while I haven't seen any problems, there could be something I'm missing that would manifest itself later.Â
Also, in testing, am I better off to delete the cluster server account from AD and join the domain with the DR server under the same name? (this is an isolated bubble so no impact on production).For the purpose of this scenario, assume all other required servers (DC, DNS, application, etc.) are present in the test environment as they would be in production and nothing requires resources outside the bubble. The only item affected is the SQL cluster.
View 7 Replies
View Related
May 15, 2007
I have attached the SAN, configured the Windows Clustering and I'm ready for SQL. SQL Server 2005 was already on this machine as a stand alone. I removed all of the software and I'm reinstalling SQL. The cluster option is not enabled. Any ideas why?
View 1 Replies
View Related
Jan 22, 2008
My site works fine in VWD2008 express, but I get this error when I try to use it on my live website.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
According to this article: http://support.microsoft.com/kb/914277 I am supposed to:
1.
Click Start, point to Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Surface Area Configuration.
Ok, there is no such program in this folder. The only thing in there is "SQL Server Error and Usage Reporting"...
The other thing I am greatly concerned with is this: All is want is for my webpages to be able to access my database for user authentication. I DO NOT want to grant the internet rights to remote connect to my database.
View 4 Replies
View Related
Dec 10, 2007
I get the following error and have been trying to figure out why I keep getting it. Initially, I had placed my project under wwwroot folder and ran it under IIS and it gave this error. Then I moved it to my local C drive and same thing. I am sharing this project with two other co-workers and all our config files and code files are same...they don't get this error but I do. I checked that SQL Server Client Network Utility has TCP/IP and the 'Named Pipes' enabled. I thought maybe I have setting in the Visual Studio 2005 that I'm not aware of that's causing this problem...it can't be the server since my co-workers aren't having this error and can't be anything in the code since all of us are sharing this project through vss. I dont' think using different version of .net framework can create this error. I changed the version from 2.0 to use 1.1x and it gave same error... Any help would be greatly appreciated. Thanks in advance.
Server Error in '/RBOdev' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.GetConnectionHolder() +16
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.LoadPersonalizationBlobs(WebPartManager webPartManager, String path, String userName, Byte[]& sharedDataBlob, Byte[]& userDataBlob) +195
System.Web.UI.WebControls.WebParts.PersonalizationProvider.LoadPersonalizationState(WebPartManager webPartManager, Boolean ignoreCurrentUser) +95
System.Web.UI.WebControls.WebParts.WebPartPersonalization.Load() +105
System.Web.UI.WebControls.WebParts.WebPartManager.OnInit(EventArgs e) +497
System.Web.UI.Control.InitRecursive(Control namingContainer) +321
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +692
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
View 3 Replies
View Related
Jan 24, 2008
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
View 2 Replies
View Related
Apr 10, 2008
Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
View 1 Replies
View Related
Sep 20, 2007
I am trying to connect to a sql server 2005 server using either windows auth or sql server auth but I can not. When I click on the connect button to connect to a server it never connects. I can not cancel once I press connect. It never times out after I press connect. I removed all registered servers that were registered previously. I have uninstalled all software that involved sql server (and sql2000) run a registry cleaner(not microsofts), installed the software to a new directory and still I can not connect to the sql2005 server (the only db).
Any ideas?
I am running Windows XP with latest services packs for both windows and sql server. I have visual studio 2005 installed on my machine and I have had sql express installed on it previously.
View 2 Replies
View Related
Nov 3, 2015
I'd like to capture the change event when it happens and have both a record posted to a table and an email notification to the DBA.
View 7 Replies
View Related
Jan 2, 2008
hi all
i get the following message error when installing sql server 2005 express :
<< sql server setup could not connect to the database service for server configuration the error was :[microsoft][gestionnaire de pilotes odbc] source de données introuvable et nom de pilote non spécifié >>
is there any help
thanks and best regards
View 6 Replies
View Related
Jun 4, 2006
OS: XP-SP2
Not able to install SQL Express 2005.
------------------------------
SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][SQL Native Client]SSL Provider: The certificate chain was issued by an authority that is not trusted.
Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files" in SQL Server Books Online.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=setup.rll&EvtID=29515&EvtType=lib%5codbc_connection.cpp%40Do_sqlScript%40OdbcConnection%3a%3aconnect%40connect%40x80090325
Needles to say, above link is useless..
I had managed to install previously, but ran into problems while trying to upsize an MS-Access database, I've tried everything from creating certificate to hacking away at the registry...Log-on with a different account, etc...Anybody knows how to get around this?
Here's part of the log file:
Microsoft SQL Server 2005 9.00.1399.06
==============================
OS Version : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Time : Sat Jun 03 20:09:53 2006
Machine : YANICK
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : e:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_YANICK_SQLSupport_1.log
--------------------------------------------------------------------------------
Machine : YANICK
Product : Microsoft SQL Server Native Client
Product Version : 9.00.1399.06
Install : Successful
Log File : e:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_YANICK_SQLNCLI_1.log
--------------------------------------------------------------------------------
Machine : YANICK
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.1399.06
Install : Successful
Log File : e:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_YANICK_SqlWriter_1.log
--------------------------------------------------------------------------------
Machine : YANICK
Product : MSXML 6.0 Parser
Product Version : 6.00.3883.8
Install : Successful
Log File : e:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_YANICK_MSXML6_1.log
--------------------------------------------------------------------------------
Machine : YANICK
Product : SQL Server Database Services
Error : SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][SQL Native Client]SSL Provider: The certificate chain was issued by an authority that is not trusted.
Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files" in SQL Server Books Online.
--------------------------------------------------------------------------------
Machine : YANICK
Product : Microsoft SQL Server 2005 Express Edition
Product Version : 9.00.1399.06
Install : Failed
Log File : e:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_YANICK_SQL.log
Last Action : InstallFinalize
Error String : SQL Server Setup could not connect to the database service for server configuration. The error was: {Microsoft}{SQL Native Client}SSL Provider: The certificate chain was issued by an authority that is not trusted.
Error Number : 29515
--------------------------------------------------------------------------------
View 3 Replies
View Related