Connecting To Oracle DB (connection Error)
Feb 6, 2007
While upgrading several packages from DTS 2000 to SSIS I came across a couple of packages where the source data comes from an Oracle DB. Until now I have not migrated data from an Oracle source.
When I tried to create a new connection I got the error:
"System.Data.Oracle client requires Oracle client software version 8.1.7 or greater."
This is being developed on a machine that would not have any oracle drivers before now, so I THOUGHT it would be as simple as downloading the drivers, but the resolution seems to be much more complex than that. When I researched it, it appeared that I needed to download the Oracle 9i software. The installation is about 10 GB and this seemed like overkill to just be able to connect to a database.
Is this in fact the correct solution? If so, or even if not, can I get a quick run down of the steps involved, and anyone's experience (problems, etc..) on the topic?
View 5 Replies
ADVERTISEMENT
Sep 5, 2007
Hi,
Anybody have a clear idea why I might have problems connecting from reporting services to Oracle 9i database using the Microsoft ODBC driver? Getting following error
"Cannot create a connection to data source 'oracleName'.
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
"
I have the data source correctly set-up thought. Is it a permissions problem?
Thanks.
View 1 Replies
View Related
Nov 4, 2007
Hi,
I have installed MS SQL Server 2005 and Service Pack 2 on a new Windows 32-bit environment. I also installed the 32-bit 10g client (the Administrator option). The tnsnames.ora file is configured properly and I can tnsping to the Oracle database without any issues. I have created a package in Visual Studio and it runs successfully when I execute the job manually. I saved the package to the MS SQL Server and when I log into Management Studio to create a job for this package, I receive the following error:
Message
Executed as user: xxxSYSTEM. ...rsion 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:42:37 AM Error: 2007-10-10 10:42:37.28 Code: 0xC0202009 Source: x Connection manager "x.x" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed.". End Error Error: 2007-10-10 10:42:37.28 Code: 0xC020801C Source: Data Flow Task OLE DB Source [18] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method ca... The package execution fa... The step failed.
I have created the package and logged into the server with the same ID to set up the job. And I have set the ProtectionLevel property to "Don't Save Sensitive Data" since I know this has been an issue in the past when I tried automating the job.
View 2 Replies
View Related
May 3, 2008
Hi,I need some help. I am getting this error after I complete the asp.net register control and click on the continue button. It crashed when it tries to get it calls this Profile property((string)(this.GetPropertyValue("Address1")));When I look at the stack, it is coming from my ProfileWrapper class which adds user address, city, etc.. from a class which inherits fromSystem.Web.Profile.ProfileBase. From the stack, it is calling the System.Web.Profile and crashed when it tries to open a connection atSystem.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject). I already migrated all aspnet_user, aspnet_roles, etc.. and don't get any connection errors. It is only when I try to get the profile data. This works on my pc, but throws an error on my lunarpage website.Any help is greatly appreciated.Thanks,AJAn error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:Line 100: public virtual string Address2 {Line 101: get {Line 102: return ((string)(this.GetPropertyValue("Address2")));Line 103: }Line 104: set {Source File: c:windowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
oot 021d50639a6858cApp_Code.54nvluyo.1.cs Line: 102Stack Trace:[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +435 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197 System.Web.Profile.SqlProfileProvider.GetPropertyValuesFromDatabase(String userName, SettingsPropertyValueCollection svc) +782 System.Web.Profile.SqlProfileProvider.GetPropertyValues(SettingsContext sc, SettingsPropertyCollection properties) +428 System.Configuration.SettingsBase.GetPropertiesFromProvider(SettingsProvider provider) +404 System.Configuration.SettingsBase.GetPropertyValueByName(String propertyName) +117 System.Configuration.SettingsBase.get_Item(String propertyName) +89 System.Web.Profile.ProfileBase.GetInternal(String propertyName) +36 System.Web.Profile.ProfileBase.get_Item(String propertyName) +68 System.Web.Profile.ProfileBase.GetPropertyValue(String propertyName) +4 ProfileCommon.get_Address2() in c:windowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
oot 021d50639a6858cApp_Code.54nvluyo.1.cs:102 ProfileWrapper..ctor() in d:inetpubvhostsjavcentral.comhttpdocsApp_CodeProfileWrapper.cs:242 ProfileDataSource.GetData() in d:inetpubvhostsjavcentral.comhttpdocsApp_CodeProfileDataSource.cs:17[TargetInvocationException: Exception has been thrown by the target of an invocation.] System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +0 System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +72 System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) +308 System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) +29 System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance) +480 System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1960 System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17 System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149 System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70 System.Web.UI.WebControls.FormView.DataBind() +4 System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82 System.Web.UI.WebControls.FormView.EnsureDataBound() +163 System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69 System.Web.UI.Control.EnsureChildControls() +87 System.Web.UI.Control.FindControl(String id, Int32 pathOffset) +21 System.Web.UI.Control.FindControl(String id) +9 CustomerDetailsEdit.OnPreRender(EventArgs e) in d:inetpubvhostsjavcentral.comhttpdocsUserControlsCustomerDetailsEdit.ascx.cs:60 System.Web.UI.Control.PreRenderRecursiveInternal() +86 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2041
View 1 Replies
View Related
Nov 14, 2006
Hi,
I have my datasource in Oracle9i and destination is Sql2005. I am connecting to Oracle 9i through OLEDb provider and when I connect to my DataSource using OLE DB Data Source, I get the following error:
Warning at "guid code": Cannot retreive the column code page info from the oledb provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale Id will be used.
Could anyone please help me trouble shoot this problem.
Regards,
Sudhakara.T.P.
sudhakaratp@hotmail.com
View 3 Replies
View Related
Sep 12, 2007
I have an issue using parameterised reports connecting to Oracle using "ODBC" and "Microsoft OLE DB Provider for Oracle" using parameteried reports. The following error is generated "ORA-01008 not all variables bound (Microsoft OLE DB Provider for Oracle)" and a similiar one for ODBC. It works fine for simple reports. Do these 2 drivers have issues passing parameters for a remote Oracle query?
Thanks.
View 4 Replies
View Related
Aug 30, 2007
Hi,
I was trying to connect to Oracle Source in SSIS
1. Err: Test connection failed because of an error in initializing provider. Oracle Client and networking components were not found
Sol: I installeed the Oracle Client tools
2. Err: ORA -12154: TNS: Could not resolve teh connect identifier specified
Sol: Then I point out the TNS file
3. Now I coonect the Oracle db . I go to Connection Manager . Specifies the provide as: Native OLE DB Oracle Provide for OLE DB, Select my DB, provide teh user name and password. and check if the connection passed.
Then in my data Flow Task when I add this source and check the Colmns its gives me an error./ sort of warning
The component reported the following warnings:
Warning at {C947B.......} [Ole DB Source[1]]: Cannot retrieve the column code page info from the OLE DB provider. if the components supports teh "DefaultCodePage" property, the code page from that property will be used.....
Will this warning has an significance. i dont see any error in my output data. but is there something I m doing wrong.
4. When I set my ProtectionLevel under Security in package property to "Dont Save Sensitive" in order to easily configure the package I m getting this error: failed Validation. The default one was EncryptSensitiveWithUserKey then its running smoothly.
Can somebody advice me on this?
I addded the all the errors and solution for 1 and 2 becuase in that way this will be helpful in future.
View 5 Replies
View Related
Feb 28, 2008
Hi All:
I have a SSIS which have a main connection to a SQL Server 2005 DB, and also another connection to a Oracle database, and fetch data from the Oracle db.
I have the 2 connection managers, and everything runs fine when I test it in dev studio.
However, once I imported it to the DB, and run it on command line, I get the "Class not registered" error.
Log file as follows:
C:>dtexec /DTS "MSDB ST1INST101CRDA_D_GIM_CONN_TEST" /SERVER crpnycmsq34q /CONNECTION "CRD_CM";""Data Source=crpnycmsq34qST1INST101;Initial Catalog=CRD;Provider=SQLNCLI.1;Integrated Security=SSPI;"" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING V
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.3042.00 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 1:23:53 PM
Info: 2008-02-28 13:23:53.91
Code: 0x40016040
Source: CRDA_D_GIM_CONN_TEST
Description: The package is attempting to configure from SQL Server using the configuration string ""CRD_CM";"[dbo].[CMG_SSIS_CONFIG]";"GIM_SOURCE";".
End Info
Info: 2008-02-28 13:23:54.03
Code: 0x40016040
Source: CRDA_D_GIM_CONN_TEST
Description: The package is attempting to configure from SQL Server using the configuration string ""CRD_CM";"[dbo].[CMG_SSIS_CONFIG]";"GIM_USER";".
End Info
Info: 2008-02-28 13:23:54.05
Code: 0x40016040
Source: CRDA_D_GIM_CONN_TEST
Description: The package is attempting to configure from SQL Server using the configuration string ""CRD_CM";"[dbo].[CMG_SSIS_CONFIG]";"GIM_PWD";".
End Info
Error: 2008-02-28 13:23:54.55
Code: 0xC0202009
Source: CRDA_D_GIM_CONN_TEST Connection manager "GIM"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2008-02-28 13:23:54.56
Code: 0xC00291EC
Source: Execute SQL Task Execute SQL Task
Description: Failed to acquire connection "GIM". Connection may not be configured correctly or you may not have the right permissions on this connection.
End Error
Warning: 2008-02-28 13:23:54.58
Code: 0x80019002
Source: CRDA_D_GIM_CONN_TEST
Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 1:23:53 PM
Finished: 1:23:54 PM
Elapsed: 1.547 seconds
I DID TRIED MY BEST to search before posting, and most of them are having problem with 32 bit and 64 bit executions.
However, in my case, both are 32 bit (as shown in the log file).
In the above test, I'm setting DoNotSaveSensitiveData, and then fetch it with package configuration.
To make sure the package configuration is not creating pblm for me, I also tried to hardcode everything in the package, and then encrypt the whole ssis with password, and run the package with the /DECRYPT option, so that everything is already intact.
But I still get the same error. Log file as follows.
C:>dtexec /DTS "MSDB ST1INST101CRDA_D_GIM_CONN_TEST" /SERVER crpnycmsq34q /De "painful" /CONNECTION "CRD_CM";""Data Source=crpnycmsq34qST1INST101;Initial Catalog=CRD;Provider=SQLNCLI.1;Integrated Security=SSPI;"" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING V
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.3042.00 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 2:24:25 PM
Error: 2008-02-28 14:24:27.11
Code: 0xC0202009
Source: CRDA_D_GIM_CONN_TEST Connection manager "GIM"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2008-02-28 14:24:27.14
Code: 0xC00291EC
Source: Execute SQL Task Execute SQL Task
Description: Failed to acquire connection "GIM". Connection may not be configured correctly or you may not have the right permissions on this connection.
End Error
Warning: 2008-02-28 14:24:27.14
Code: 0x80019002
Source: CRDA_D_GIM_CONN_TEST
Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 2:24:25 PM
Finished: 2:24:27 PM
Elapsed: 1.422 seconds
Can anyone suggest what is missing ?? or what can be done ??
Any pointers are greatly appreciated.
Thanks,
- Henry.
View 18 Replies
View Related
Mar 14, 2007
Hello all.
I upgraded a SQL 2000 installation to SQL 2005 this past weekend. Minimal issues overall, but one that did crop up relates to a linked server to an Oracle database. The linked server worked before the upgrade, and stopped working immediately after.
We're running on Windows 2003 x64, latest service pack. The linked server is set up using the MSDAORA provider. The error I'm getting post-upgrade is:
=====================
OLE DB provider "MSDAORA" for linked server "PROD" returned message "ORA-06413: Connection not open.".
Msg 7303, Level 16, State 1, Procedure RDM_GET_REP_LIST_SP, Line 12
Cannot initialize the data source object of OLE DB provider "MSDAORA" for linked server "PROD".
=====================
A tnsping from the server works fine. I've also tried recreating the linked server. Any help would be appreciated. Let me know what other information would be useful.
Thanks,
Adam
View 3 Replies
View Related
Oct 10, 2007
Hi,
I have installed MS SQL Server 2005 and Service Pack 2 on a new Windows 32-bit environment. I also installed the 32-bit 10g client (the Administrator option). The tnsnames.ora file is configured properly and I can tnsping to the Oracle database without any issues. I have created a package in Visual Studio and it runs successfully when I execute the job manually. I saved the package to the MS SQL Server and when I log into Management Studio to create a job for this package, I receive the following error:
Message
Executed as user: xxxSYSTEM. ...rsion 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:42:37 AM Error: 2007-10-10 10:42:37.28 Code: 0xC0202009 Source: x Connection manager "x.x" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed.". End Error Error: 2007-10-10 10:42:37.28 Code: 0xC020801C Source: Data Flow Task OLE DB Source [18] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method ca... The package execution fa... The step failed.
I have created the package and logged into the server with the same ID to set up the job. And I have set the ProtectionLevel property to "Don't Save Sensitive Data" since I know this has been an issue in the past when I tried automating the job. I've four posts regarding this error message on the MSDN forums that aren't helpful at this moment - I'm hoping that someone will have found a solution since those posts. Any suggestions are welcomed.
Thanks for your help!
Sue
View 14 Replies
View Related
Feb 22, 2006
Hello,
On my dev server I have working ssis packages that use connections Microsoft OLEDB provider for Oracle MSDAORA.1 and Oracle provider for oledb and OracleClient data provider.
I use one or the other according to my needs.
In anticipation and to prepare for the build of a new production server, I have build a test server from scratch and deployed to it the entire dev.
Almost everything works except Microsoft OLEDB provider for Oracle.
ssis packages on the test machine will return an error
Error at Pull Calendar from One [OLE DB Source [1]]: The AcquireConnection method call to the connection manager "one.oledb" failed with error code 0xC0202009.
Error at Pull Calendar from One [DTS.Pipeline]: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.
[Connection manager "one.oledb"]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle error occurred, but error message could not be retrieved from Oracle.".
I have used the same installers for OS, SQL and Oracle SQL*Net on both dev and test machines. The install and then the restore/deployment on Test went fine.
Does anyone could point me to the right direction to solve this issue?
Thanks,
Philippe
View 17 Replies
View Related
Mar 5, 2007
Facts:1. I am using my account on Godaddy trying to connect to my sql server db.2. I can get into my db using user id and password.3. Godaddy's help file shows this for a connection string: connectstr = "Driver={SQL Server};SERVER=" & db_server & ";DATABASE="
&db_name & ";UID=" & db_username & ";PWD=" &
db_userpassword4. My connection string: "Server=whsql-v09.prod.mesa1.secureserver.net;uid=dbasolutions;pwd=***;database=DB_87972;" & _ "Trusted_Connection=False providerName=System.Data.SqlClient"{password **** out}5. Get error message An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) I tried to email Godaddy's help desk with this information. There first response: We do not allow remote connections to our sql server database.There second response was to read the help file!Does anybody have any suggestions? Thanks in advance,bswanson
View 1 Replies
View Related
Apr 15, 2008
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this
I use Microsoft Windows Vista Home Professional
I have already installed to my computer Microsoft SQL Server 2005 and SQL Serves Express. I used to be successful to connect to the SQL Server but now I CAN NOT.
Not: I try to run SQL Server 2005 but I can not, even I logged on to my computer with an administrator rights. On the other hand I can start and stop the SQL Server Express easily.
As a result, how can I solve this problem.
Thanks in advance.
Bilgin Kılıç
Additional Details
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
View 5 Replies
View Related
Jun 28, 2006
Hi,
I want to connect to Oracle from MS SQL Server.
Is it possible?
If yes, please guide me in this issue.
SALIH KM
View 2 Replies
View Related
Jan 28, 2005
Hi, i need to build some way of connecting Oracle to SQL Server in order to pull data off Oracle and house it temporarily on SQL 2000 for searching.
Basically we've built an intranet using ASP and SQL 2000 and which also pulls data off Oracle, however our connection to Oracle is very slow so an idea to speed it up would be to have SQL store a temporary snapshot of this data and the ASP site query off the fast connection it has to SQL rather than use our slow connection to Oracle.
This temporary snapshot of Oracle data would be stored on SQL 2000 and updated on a scheduled basis.
Any ideas how to do this, or a better way to work this?
Thing is I tried installing the Official Oracle ODBC & Client software on our SQL 2000 server before and it just took out SQL 2000 so would really like to hear other options.
Thanks in advance,
:confused:
View 2 Replies
View Related
Jan 19, 2006
Hi,
I am new to using SSIS (after using DTS on SQL Server 2000 for many years).
I am trying for the first time to connect to an Oracle 9.2 database and export data from it into SQL Server 2005.
I used the Microsoft OLE DB Oracle Provider to connect to the Oracle instance. The test connection works fine, but when I try and preview a table or copy data from Oracle I get the error....
The component reported the following errors
Cannot retrieve column code page
Has anyone got any ideas how I fix this?
Many thanks
Pete
View 11 Replies
View Related
Oct 24, 2006
Hi Gurus,
I am trying to build a Data Warehouse using SSIS in SQL Server 2005. My source data is in Oracle RDB. Now when I am trying to connect to oracle RDB using the OLE DB Source component, I am getting the following error.
Test connection failed because of an error in initializing provider. Oracle client and networking componenets were not found. These components are supplied by Oracle Corporation and part of the Oracle Version 7.3.3 or late client software installtion.
Provider is unable to funtion until these components are installed.
I did install the Oracle RDB client software .Apparently it looks like Microsoft OLE DB for Oracle supports Oracle 7.3.3 and above. At the same time I tried to use ODBC for Oracle RDB driver from ODBC data sources. But the OLE DB Source Component in SSIS can't recognize ODBC. So now I am stuck on how to load the data from Oracle RDB to SQL Server 2005 staging area.
Any thoughts on this would be really appreciated. Ideally we are looking to port the data directly from Oracle RDB to SQL Server without any intermediate flat files (flat files etc)
Thanks,
SK
View 8 Replies
View Related
Jul 7, 2006
Can anybody point me how to connect to an Oracle DB using SSIS? I use the ole DB Connection Manager and pick the Microsoft OLE DB Provider for Oracle but it doesn't seem to work. Any suggestions are greatly apprecaited.
Thanks.
Sam.
View 9 Replies
View Related
Jan 11, 2006
Hello all,
I'm using a OLE DB Connection Manager to Oracle (I've installed the client) and using Oracle Native OLE DB Provider.
The problem was the view In Oracle I'm returning a column that uses a fuction on a numeric field in the the select part of the statement, and by this, the Precition is not displayed when I'm trying to look at the data types of the fields in the view.
The Precision is shown as 0 in the external field part of the component.
I have read the previous post concerning the problem connecting to Oracle Using the Oracle provider, and solved it by using the Microsoft provider, but still I have a question about the oracle provider:
I changed the precision on the External column (from 0 to 15) and also an the Output column, but now I'm getting an error on about error output not matching:
Error 6 Validation error. Data Flow Task: OLE DB Source 1 [8970]: The output column "UPDATE_TIME_NUM" (9333) on the non-error output has no corresponding output column on the error output. Dim_registered_user.dtsx 0 0
I cannot change the error output datatype, cannot delete it or do anything at all.
Is there a way to fix the problem?
View 2 Replies
View Related
Aug 18, 2007
Hello Everyone,
I€™m getting a problem in SCD connecting to oracle DB.
I had set the OLE DB Input Output Properties Tab
And mapped the columns in Column Mappings Tab
Every thing is taken care according to Type 2 load
But every time I run the job its inserting the records rather than updating it or ignoring if not find any new or changed records from source.
Can any one help me in sorting this issue.
Please.
View 1 Replies
View Related
Dec 7, 2007
Could anyone please guide me in detail to connect Oracle Forms 9i/10g with MS SQL Server database?
To connect with Oracle Database, we need to copy and paste the tnsnames.ora file from the Oracle Database folder to the Oracle Forms folder.
But how do i connect with other databases like SQL Server, MS Access, and so on?
Thanks in advance.
View 6 Replies
View Related
Dec 7, 2007
Could anyone please guide me in detail to connect Oracle Forms 9i/10g with MS SQL Server database?
To connect with Oracle Database, we need to copy and paste the tnsnames.ora file from the Oracle Database folder to the Oracle Forms folder.
But how do i connect with other databases like SQL Server, MS Access, and so on?
Thanks in advance.
View 3 Replies
View Related
Mar 18, 2008
Help, I'm attempting to connect to an Oracle 8 database using the microsoft OLD DB for oracle driver.
It works fine connecting to a 9i database but when I attempt to connect to the 8 database I get ORA-12537 TNS Connection Closed.
I can connect to the database fine using sqlplus on the machine.
Any ideas would be appreciated.
Thanks
Stapsey
View 1 Replies
View Related
Nov 29, 2006
Now this is the first time i have tried this with SQL 05 I am trying to Import data from an Oracle DB. I have the connection info:
Xtx20xxx = (DESCRIPTION = (ADDRESS_LIST =(ADDRESS = (PROTOCOL = TCP)(HOST =urlpart1.part2.part3.com)(PORT = 1521)))(CONNECT_DATA =(SID = Xtx20xxx ))
)
I used the Microsoft OLEDB provider for oracle from the dropdown,
The username and password I have also. I tried to enter in the Xtx20xxx as the server name, clicked "Properties"
put in the username and password I can given and clicked "Test Connection". No matter what I get the infamous ORA-12154: TNS:could not resolve service name error message. I am sure I am missing something obvious here but I have absolutely no clue and all the googling in the world has not given me any help. I do have the Oracle 10g client tools installed on this workstation (running Windows XP Prof SP2 and SQL 2005 STD).
View 5 Replies
View Related
Nov 20, 2007
Hi all,
I need to connect with the Oracle Database for the Reports application. But i am unable to do the same. I am getting errors like ORA-12514,ORA-06401 while trying it.
(1) Please tell me about any extra settings need to be done in the listener.ora,tnsnames.ora for getting SSRS connected with the Oracle DB.
(2) Tell me the format of the connection string to be used for the connection with the Oracle database.
(3) Also which datasource has to used.. Oracle / Microsft OLEDB provider for Oracle for the Same.
Please help me with these issues.
With Thanks
M.Mahendra
View 4 Replies
View Related
Jan 10, 2006
Hello everyone,
I am working on a project for a professor. The project entails
designing and creating a database. We
were given individual space on the schools database server and we were given
SSH secure shell to connect and manage our respective databases. I took it upon myself to try out SQL Server
Express. Using the management studio I
am trying to connect to my school database and can€™t seem to figure it
out. Can someone please give a noob some
simple and quick instructions on how to achieve this?
Thank you,
Your Friendly Neighborhood Programmer,
This is the SSH product in case any one was interested, ftp://ftp.ssh.com/pub/ssh/SSHSecureShellClient-3.2.9.exe
View 1 Replies
View Related
Jun 22, 2007
Are there generalized best practices with regards to which method/provider to use when accessing an Oracle database? I have used both the "Native OLE DBMicrosoft OLE DB Provider for Oracle" and the "Native OLE DBOracle Provider for OLE DB" and both seem to have their own quirks (requirement to convert to Unicode, etc) but I also have heard that I shouldn't be using an "OLE DB" source at all, but to set it up as an ADO .Net connection.
We are just beginning to implement SSIS, and are trying to establish Best Practices/Standards etc.
Are there any gotchas - performance and/or otherwise I should know about?
Thanks in advance!
View 1 Replies
View Related
Feb 29, 2008
I'm using Reporting Services 2005 and I can view the report in Visual Studio using the preview tab. After I deploy the report and datasource, when I try to view the report on the report server is says that I must have Oracle Client version 8.xx or higher.
I have the same Oracle Client Version on my local machine and the Report Server with the same DataSource name set up for Oracle on both machines.
Any ideas why this would work on my local machine but not the Report Server?
View 1 Replies
View Related
Jan 23, 2007
I am trying to pull data from an Oracle 9i database to my SQL Server 2005 sp1 database on Windows 2003 64bit Itanium server. Each time I try to use the import wizard, select the Microsoft OLE DB driver for Oracle, I get an error message telling me that the Oracle client tools are not installed. This happened after I had already installed the 9i tools, tested the connection using TNSPING and confirmed the tnsnames file was correct. So, I uninstalled the 9i tools and then installed the 10g client tools. Tested everything after the install and then tried the import again selecting the MS OLE DB driver for Oracle. I again got the error message that the Oracle tools were not installed.
has anyone ran into this problem and if so, were you able to fix it?
View 2 Replies
View Related
Jan 12, 2006
Hi,
I am trying to make an oracle publiching from sql server 2005 enterprise final release, i installed the oracle client 10.2 (10g) on the same server where sql server already installed, i made different connection to oracle database instance and it was ok.
from sql server : right click on publication -New oracle publication-Next-Add Oracle Publisher-Add button-Add Oracle Publisher-i entered server insttance test1 and their users and passwords--connect --->
the oracle publisher is displayed in the list of publisher but when press ok i got the following error :
TITLE: Distributor Properties
------------------------------
An error occurred applying the changes to the Distributor.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=Microsoft.SqlServer.Management.UI.DistributorPropertiesErrorSR&EvtID=ErrorApplyingDistributor&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
SQL Server could not enable 'test1' as a Publisher. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The permissions associated with the administrator login for Oracle publisher 'test1' are not sufficient.
Changed database context to 'master'. (Microsoft SQL Server, Error: 21684)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=21684&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
Any idea about this error ?
Thanks
Tarek Ghazali
SQL Server MVP.
View 2 Replies
View Related
Jul 20, 2005
I have created a DTS package that pulls data in from Oracle into SQLServer. When I run it directly on the server (from EnterpriseManager), it works fine. When I run it from Enterprise Manager on aclient machine that does not have the Oracle client software, it doesnot run, giving me the error: "The Oracle client and networkingcomponents were not found...". I was hoping I wouldn't need to havethe client software installed on a machine other than the server whereSql Server is running. The problem here is that there are a number ofmachines from where I would like to execute this DTS package that I donot want to install/configure the Oracle client software. I don'tquite understand why the configuration of the client is importanthere. In my mind, when I am using enterprise manager from a clientmachine, I am using it sort of like a terminal services client toconnect to the server. I guess there is a lot more happening in thebackground.Thanks for any feedback,Marcus
View 2 Replies
View Related
Sep 7, 2006
I am trying to connect to a Oracle 9i Server to execute a sql task, but the connection when tested seems to fail with the following error from the Integration Services Project:
Test connection failed because of an error in initializing provider. ERROR [NA000][Microsoft][ODBC driver for Oracle][Oracle]ORA-12541: TNS:no listener
ERROR[IM006][Microsoft ODBC Driver Manager] Driver's SQLSetConnectAttr failed
ERROR[0100][Microsoft ODBC Driver Manager] The driver does not support the version of ODBC behavior that the application requested (see SQLSetEnvAttr).
The connection was configured and tested from Oracle's SQLPlus session. Please note that the port that the TNS Server is listening is not the default. Is there somewhere I can specify the port in the SSIS connection manager to resolve the issue.
I have tried OLEDB connection and that does not work either.
Any inputs will be appreciated.
Thanks,
Monisha
View 6 Replies
View Related
