I am running a mirrored database using SQL2005 and whether or not mirroring has anything to do with this has not been determined. Often when a failover is necessary we are in a state where the active server responds just enough to show existence but not enough to determine database state. The SQL Management Studio can not connect to the server and the exception report from our application has the following message:
<exception type="System.Data.SqlClient.SqlException">
<message>A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.)</message>
<source>.Net SqlClient Data Provider</source>
<target>System.Data.ProviderBase.DbConnectionPool::GetConnection</target>
<stack>
<trace index="0">at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)</trace>
<trace index="1">at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)</trace>
<trace index="2">at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)</trace>
<trace index="3">at System.Data.SqlClient.SqlConnection.Open()</trace>
<... application stack/>
</stack>
</exception>
When this happens, the the SqlClient does not fail over to the mirror until we stop the service on the failed SQL server. Sometimes, the mirror server doesn't full pick up until we stop the service on the failed server.
Today, out of curiosity I attemped to connect to port 1433 using TelNet to see if the server was even listening at the standard endpoint anymore (before I received the Exception Report above). It was. So how do I determine what is happening that causes the connections to close, and if at all possible - prevent it?
Thanks in advance for any advice you may have.
-Dave
Server Version:
Microsoft SQL Server 2005 - 9.00.3042.00 (X64)
Feb 10 2007 00:59:02
Copyright (c) 1988-2005 Microsoft Corporation
Standard Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2)
while connecting to DATABASE ENGINE i got this error message.....
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (.Net SqlClient Data Provider)
I have been successfully using SQL Server 2005 developer edition for a couple of months now. However, when I started Microsoft SQL Server Management Studio this morning I could not connect to the €śDatabase Engine€? (I€™m using Windows Authentication). I can still connect with the €śIntegration Services€? and €śAnalysis Services€? on the same server. The server running on my local machine, so there shouldn€™t be any problems with the network. I am also able to connect with it through ODBC, it just seems to be the Server Management Studio which can€™t connect, and it only has problems with the €śDatabase Engine.€? Any help would be appreciated.David
The detailed error message says:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.) (.Net SqlClient Data Provider)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10061&LinkId=20476
------------------------------
Error Number: 10061
Severity: 20
State: 0
------------------------------
Program Location: at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
Is this possible to connect do the Database Engine (on sql server 2005 on XP platorm - file *.mdf (not mobile *.sdf)) from win CE 5.0?
I tried to do this : ConnectionStringSQLServerCE = "Data Source=WORK_STATION\SQLEXPRESS;Initial Catalog=dbMachines;Integrated Security=False;Password=Panel;User ID=Panel";
SqlCeConnectionCE = new SqlConnection(ConnectionStringSQLServerCE);
SqlCeConnectionCE.Open();
but I catch error: catch (PlatformNotSupportedException ex) €žPlatformNotSupportedException€? I noticed that I see server because when I use: ConnectionStringSQLServerCE = "Data Source=WORK_STATION\SQLEXPRESS";
zwraca błąd typu
catch (SqlException ex) €śLogin failed for user ''. The user is not associated with a trusted SQL Server connection.€?
I used using System.Data.SqlClient;
from Compact Framework 2.0 under Visual Studio 2005 Device Application Windows CE 5.0
1. While connecting to the Reporting Services Engine (Using SQL Server Management Server). The error message is given below. Report Server is working fine, I am able to browse the reports from the report server.
------------------------------------------------------------------------------------------------------------------------------------------------------------ TITLE: Connect to Server ------------------------------ Cannot connect to BTP8NMB03. ------------------------------ ADDITIONAL INFORMATION: Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'. The request failed with the error message: -- <HTML dir="ltr"> <HEAD><meta name="GENERATOR" content="Microsoft SharePoint" /><meta name="progid" content="SharePoint.WebPartPage.Document" /><meta HTTP-EQUIV="Content-Type" content="text/html; charset=utf-8" /><meta HTTP-EQUIV="Expires" content="0" /><meta name="ROBOTS" content="NOHTMLINDEX" /><title>
<table width=100% border=0 class="ms-titleareaframe" cellpadding=0> <TR> <TD valign=top width="100%" style="padding-top: 10px" class="ms-descriptiontext"> <span id="ctl00_PlaceHolderMain_LabelMessage">The file you are attempting to save or retrieve has been blocked from this Web site by the server administrators.</span> <P><span class="ms-descriptiontext"> <span id="ctl00_PlaceHolderMain_helptopic_troubleshooting"><A Title="Troubleshoot issues with Windows SharePoint Services. - Opens in new window" HREF="javascript:HelpWindowKey('troubleshooting')">Troubleshoot issues with Windows SharePoint Services.</A></span>
2. When I try to connect to the Report Manager. I get the error "The request failed with HTTP status 400: Bad Request."
The log file contains the following information: ------------------------------------------------------------------------------------------------------------------------------------------------------------- <Header> <Product>Microsoft SQL Server Reporting Services Version 9.00.3042.00</Product> <Locale>en-US</Locale> <TimeZone>India Standard Time</TimeZone> <Path>D:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServerWebApp__05_20_2008_20_12_13.log</Path> <SystemName>BTP8NMB03</SystemName> <OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName> <OSVersion>5.2.3790.131072</OSVersion> </Header> w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing ReportBuilderTrustLevel to '0' as specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing MaxScheduleWait to default value of '1' second(s) because it was not specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing DatabaseQueryTimeout to default value of '30' second(s) because it was not specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing ProcessRecycleOptions to default value of '0' because it was not specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing RunningRequestsScavengerCycle to default value of '30' second(s) because it was not specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing RunningRequestsDbCycle to default value of '30' second(s) because it was not specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing RunningRequestsAge to default value of '30' second(s) because it was not specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing CleanupCycleMinutes to default value of '10' minute(s) because it was not specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing WatsonFlags to default value of '1064' because it was not specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing WatsonDumpOnExceptions to default value of 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' because it was not specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to default value of 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' because it was not specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing SecureConnectionLevel to default value of '1' because it was not specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file. w3wp!library!5!5/20/2008-20:12:13:: i INFO: Initializing WebServiceUseFileShareStorage to default value of 'False' because it was not specified in Configuration file. w3wp!ui!5!5/20/2008-20:12:17:: e ERROR: The request failed with HTTP status 400: Bad Request. w3wp!ui!5!5/20/2008-20:12:17:: e ERROR: HTTP status code --> 500 -------Details-------- System.Net.WebException: The request failed with HTTP status 400: Bad Request. at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods() at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods() at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname) at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection() at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level) at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args) at System.EventHandler.Invoke(Object sender, EventArgs e) at System.Web.UI.Control.OnInit(EventArgs e) at System.Web.UI.Page.OnInit(EventArgs e) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) w3wp!ui!5!5/20/2008-20:12:18:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted. at System.Threading.Thread.AbortInternal() at System.Threading.Thread.Abort(Object stateInfo) at System.Web.HttpResponse.End() at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm) at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal() at System.Threading.Thread.Abort(Object stateInfo) at System.Web.HttpResponse.End() at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm) at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) w3wp!ui!7!5/20/2008-20:12:26:: e ERROR: The request failed with HTTP status 400: Bad Request. w3wp!ui!7!5/20/2008-20:12:26:: e ERROR: HTTP status code --> 500 -------Details-------- System.Net.WebException: The request failed with HTTP status 400: Bad Request. at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods() at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods() at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname) at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection() at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level) at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args) at System.EventHandler.Invoke(Object sender, EventArgs e) at System.Web.UI.Control.OnInit(EventArgs e) at System.Web.UI.Page.OnInit(EventArgs e) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) w3wp!ui!7!5/20/2008-20:12:27:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted. at System.Threading.Thread.AbortInternal() at System.Threading.Thread.Abort(Object stateInfo) at System.Web.HttpResponse.End() at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm) at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal() at System.Threading.Thread.Abort(Object stateInfo) at System.Web.HttpResponse.End() at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm) at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) w3wp!ui!1!5/20/2008-20:25:18:: e ERROR: The request failed with HTTP status 400: Bad Request. w3wp!ui!1!5/20/2008-20:25:18:: e ERROR: HTTP status code --> 500 -------Details-------- System.Net.WebException: The request failed with HTTP status 400: Bad Request. at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods() at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods() at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname) at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection() at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level) at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args) at System.EventHandler.Invoke(Object sender, EventArgs e) at System.Web.UI.Control.OnInit(EventArgs e) at System.Web.UI.Page.OnInit(EventArgs e) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) w3wp!ui!1!5/20/2008-20:25:19:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted. at System.Threading.Thread.AbortInternal() at System.Threading.Thread.Abort(Object stateInfo) at System.Web.HttpResponse.End() at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm) at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal() at System.Threading.Thread.Abort(Object stateInfo) at System.Web.HttpResponse.End() at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm) at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
When i have multiple sql server instances running on one server, how to check the names of that instances with out connecting to sql server management studio.
We are trying to install Ponemah (DSI) Application and it stops every time with no errors but in the same place. It installed perfectly on other computers. This one is XP also - can't find differences except that when we look we can see that the application does not create the sql engine. Do we need to reinstall office or what is it that will repair ODBC?? The tech support for the product has not been able to find solution.
Hi, I am building a website using visual web developer and sql server 2005, i want to implement a search box/engine which will return search results to the user, the results would be details of a movie they are looking for, i appreciate all advice and help given, thanks.
Hi,I was so lost in Google Desktop Search last night, I kept on dreamingabout the endless possiblisties of Google Search Technology.While I was in school I had read enough about DB informationretrivial. Why can't google use their search technology to buildDatabase engine ? Isn't that a possiblity ?Am I still dreaming or am I awake ?Cheers,da_LazyBoy
I'm having an ongoing fallout with the Operations team where I work about database backup strategy. Â They use vSphere (VM ware) to backup all the disks on the servers and included in this are the SQL backups. Â Now I don't really trust this because whenever I ask for a restore, which is very infrequently, they give me an mdf/ldf pair. Â To my mind this shows they are just backing up files and although these files can be re-attached this is not safe, as they were open when the backup was taken. Â Â What I would like to do is use native (or RedGate) backup to create a full backup and have the vSphere pick up the .BAK files.Â
when I run the Query "Select @@ServerName" it is providing the server name which is not same as I connect to SQL Server.example : My SQL Server Name is "XXX123" and when I run the above query it is Printing as "YYY123"
I have Reporting Services hosted on a server which has Workgroup edition of SQL Server which does not support csv export. I would like to write a csv Renderer.
I am not sure how complex this task is likely to be. Are there any White Papers or samples that would assist ? Any advice to point me in the right direction would be most appreciated.
Is it possible to create a SQL Server 2005 cluster and run SAS 2005 clustered on the same servers?
In particular I want to run a cluster of 6 servers as follows:-
* 3 active servers running mulitple instances of SQL Server 2005 * 1 active server running Reporting Servies and Analysis Services * 2 passive servers for failover
I'm not sure if this is the appropriate forum to ask this question; however, here goes. I'm being asked to create/modify a search engine for our Web site. Beyond trying to enhance the speed, I've been asked to add spelling and punctuation checks into the search text. Right now, all that's being done is a simple like statement. What's the best method to query a database? For example, if someone typed in "A and W" or "A/Ws" to get the value"A & W's", how would I make the link? Is there a database table that exists that I could reference to replace & with and (or vice versa) , etc... Is there a good place to start?
Hi All, I am doing search engine in my home page. It will search all products details for a specified pattren/search keyword in all categories. It should display the first product as the most character match of key words which the user has entered for the Products. Any idea plz...................... My logic is prod_name like '%mobile%' Thanks.
Hello Friends, I am developing a search engine with Full-Text Catalogues. Now I wanna give two options to user for search 1) Exact word 2) Like Word But catalogues always searches for like words.e.g. If "Customer Responsivness" is search text and i want exact word .but It gives result as like query means return records contains the text "Customer" or "Responsivness" or "Customer Responsivness" Can any body help that how can i change catalogues to behave it like Exact word also If there is any other method to serach from sql server except catalogue please reply. Thanks Dheeraj Verma
Hi everybody. I was trying to install MS SQL Server Engine this morning. At the command prompt I typed setup SAPWD=password SECURITYMODE=SQL (where password was my password). After running the MSI I got the following error: Product: Microsoft SQL Server Desktop Engine -- Setup failed to configure the server. Refer to the server error logs and setup error logs for more information.The Event ID is 1013. Can anybody tell me how to install this program. Thanks in advance for any help.
Hi All, Any suggestions / views / help on below question would be welcomed. I am building an asp.net 2.0 application with sql 2005 express as back end. My back end has 3 major tables which are: tblArticles - saves basic info on articles posted by user (like articleid, title, short desc, rating, views, etc) tblCategories - saves various categories and their hierarchies (id, parented, name, etc) tblArticleCategories - saves info on which articles fall in which categories (like articleid, categoryid) as of now, i am caching all rows from the first 2 tables, but i am in a bit of doubt for caching the third table (tblArticleCategories), although data in this table wont change very often and also this table will just have 2 columns and not many rows as well and this is a good target for caching, but the reason I am in a bit of doubt to cache this table is, when my website visitor clicks on any category link in the category tree view, I need to use an inner join across all these 3 tables to locate and return all articles found in that particular category. But I can do the same thing without hitting the database as I already have 2 of the required 3 tables in my cache, I can simply add the third table to my cache and then using the dataview objects rowfilter property on these 3 cached tables, I can very well get the appropriate results. But I wonder which of the 2 methods would you prefer and suggest, I mean do you feel that just to save hits against the database, I am going to far and doing a lot of crap using the dataview (which might not be as efficient as sql engine) or you feel that the inefficiency of the dataview will still win compared to the cost of hitting the database for this Thanks in advance, bye take care Raj Chaudhari, Mumbai, India (MCAD.NET) www.xtremebiz.biz
I'm running SQL Server 6.5, with the latest Service pack on NT 4.0 with SP4. A couple of days ago I started getting a warning message in my event log right after a scheduled task ran. The scheduled task calls three stored procedures (data dumps for master, msdb, and a production database) it also runs a consistency check on each before dumping them. I can interactively run each stored procedure and get NO error messages. Prior to getting the warning message (which occurs after the scheduled task runs) I get normal informational entries that the dumps occurred without a problem and the files are written to the proper area. The error is in the Task Engine category and are Warning type messages. Here is the text:
SQL Server Scheduled Task: 27, 'Proddata Dump' -- Status: Failed -- Task Invoked on: 5/20/99 5:00:00 AM -- Message: Database 'ASSMTCTRPROD' (116647 pages) dumped to file <1> on device 'D:DATDUMPASSMTCTRPROD_990520_DATA.DMP'. (Message 4035)
Any help that anyone could give would be greatly appreciated. Thanks
Hi folks, Whts up........??? M back, after a long gap. I have come across with a major issue. And u know wht th issue is.........??? It is about th DATABASE SEARCH TOOL. I have a database of around 30 tables. Now I wud like to have aa search engine on my .asp page. There will be a text box on th page and one submit button. After typing some text in th text area n submitting th page, my package sud check tht perticular text in all th COLUMNS of all th TABLES, n whrevr it gets a match (exactly same, or by speech recognition), it sud through th links on th next page.
Nw i wud like u guys to take this problem, at th earliest n come up with a up to th mark solution.
i installed sql server 2005 but cant connect to database engine. i write (computer name)sqlexpress but it failed. error is:
TITLE: Connect to Server ------------------------------ Cannot connect to rezasqlexpress. ------------------------------ ADDITIONAL INFORMATION:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
Hi All, I am pretty new to SQL and would like a bit of friendly help, please. Am trying to set up a .Net web site that will have dynamic content supplied by a true SQL server (am using MSDE to build this first).
My issue is in building a search engine on my web site that will return hits from the content of the pages which are loaded in MSDE.
Is there a third party or open source search engine available?
Any clues for how to build (or beg, borrow or steal) a workable search engine to do this?
I have a problem starting a database engine. I do not have admin rights to do so.When i try to add a new admin i am told that it failed since sql server does not provide for remote connections and when i try to change that....changes will take place when the database engine is restarted. The problem with that last one is that the engine wont even start in the first place so it seems like i have in a loop deadlock. Can someone help me out with this one? I am using Vista Home Premium.
The sky aint the limit for me.....I dont have any!!!
hi,I'm building a simple search engine using keyword and title of a page:select ID, content_ID, 3 as 'weight'from tblPagewhere keywords LIKE '%test%'unionselect ID, content_ID, 2from tblPagewhere title LIKE '%test%'now I want to sum and order 'weight'thx
