Help, I'm attempting to connect to an Oracle 8 database using the microsoft OLD DB for oracle driver.
It works fine connecting to a 9i database but when I attempt to connect to the 8 database I get ORA-12537 TNS Connection Closed.
I can connect to the database fine using sqlplus on the machine.
Any ideas would be appreciated.
Thanks
Stapsey
Hi,
I have my datasource in Oracle9i and destination is Sql2005. I am connecting to Oracle 9i through OLEDb provider and when I connect to my DataSource using OLE DB Data Source, I get the following error:
Warning at "guid code": Cannot retreive the column code page info from the oledb provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale Id will be used.
Could anyone please help me trouble shoot this problem.
Regards,
Sudhakara.T.P.
sudhakaratp@hotmail.com
Getting following error while trying to connect to ORACEL database using OLEDB manager.
Error at RADAR [Connection manager "RADAR_Updated"]: SSIS Error Code DTS_E_OLEDB_NOPROVIDER_ERROR. The requested OLE DB provider OraOLEDB.Oracle.1 is not registered. Error code: 0x00000000.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
[code]....
Hi when i am using OLDB Command for Update Existing Records the Follwing ERror Code I am getting . Any one pls help me on this one.
1)[DTS.Pipeline] Error: The ProcessInput method on component "OLE DB Command 1" (9282)
failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method.
The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
2)
[OLE DB Command 1 [9282]] Error: An OLE DB error has occurred. Error code: 0x80040E10.
3)
[OLE DB Command 1 [9282]] Error: An OLE DB error has occurred. Error code: 0x80040E10.
Hi all,
I need to connect with the Oracle Database for the Reports application. But i am unable to do the same. I am getting errors like ORA-12514,ORA-06401 while trying it.
(1) Please tell me about any extra settings need to be done in the listener.ora,tnsnames.ora for getting SSRS connected with the Oracle DB.
(2) Tell me the format of the connection string to be used for the connection with the Oracle database.
(3) Also which datasource has to used.. Oracle / Microsft OLEDB provider for Oracle for the Same.
Please help me with these issues.
With Thanks
M.Mahendra
Hello,
On my dev server I have working ssis packages that use connections Microsoft OLEDB provider for Oracle MSDAORA.1 and Oracle provider for oledb and OracleClient data provider.
I use one or the other according to my needs.
In anticipation and to prepare for the build of a new production server, I have build a test server from scratch and deployed to it the entire dev.
Almost everything works except Microsoft OLEDB provider for Oracle.
ssis packages on the test machine will return an error
Error at Pull Calendar from One [OLE DB Source [1]]: The AcquireConnection method call to the connection manager "one.oledb" failed with error code 0xC0202009.
Error at Pull Calendar from One [DTS.Pipeline]: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.
[Connection manager "one.oledb"]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle error occurred, but error message could not be retrieved from Oracle.".
I have used the same installers for OS, SQL and Oracle SQL*Net on both dev and test machines. The install and then the restore/deployment on Test went fine.
Does anyone could point me to the right direction to solve this issue?
Thanks,
Philippe
Hi everybody,
I have designed a DTS package which will migrate a view from Sqlserver 2000 to Oracle.My package is using Microsoft OLEDB provider for Oracle driver for connecting to oracle.Im able to execute this package on the my system ie on the system where sqlclient is installed(Oracle client is also installed on my machine) .But when im doing it on the server im not able to do it.The Connection to Oracle Fails.
I wanted to know in order to connect to Oracle from the server,is it necessary that Oracle has to be installed on the server?.If yes, is it enough if i install oracle client on the server or Oracle Server version has to be installed on Server.
Please suggest me wht should i do know?
Thanks in advance
Regards
Arvind L
Are there generalized best practices with regards to which method/provider to use when accessing an Oracle database? I have used both the "Native OLE DBMicrosoft OLE DB Provider for Oracle" and the "Native OLE DBOracle Provider for OLE DB" and both seem to have their own quirks (requirement to convert to Unicode, etc) but I also have heard that I shouldn't be using an "OLE DB" source at all, but to set it up as an ADO .Net connection.
We are just beginning to implement SSIS, and are trying to establish Best Practices/Standards etc.
Are there any gotchas - performance and/or otherwise I should know about?
Thanks in advance!
I have an issue using parameterised reports connecting to Oracle using "ODBC" and "Microsoft OLE DB Provider for Oracle" using parameteried reports. The following error is generated "ORA-01008 not all variables bound (Microsoft OLE DB Provider for Oracle)" and a similiar one for ODBC. It works fine for simple reports. Do these 2 drivers have issues passing parameters for a remote Oracle query?
Thanks.
hi,
can i use the acquireconnection method to an oledb for oracle connection manager?
Hi,
I can connect to a remote SQL server with ADO.NET but not with OLEDB.
I get
------------------------------
Test connection failed because of an error in initializing provider. Login timeout expired
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
Named Pipes Provider: Could not open a connection to SQL Server [233].
------------------------------
Through the SQL Server Connection Manager, if I disable Named Pipes and enable TCP/IP, I get for OLEDB connection:
------------------------------
Test connection failed because of an error in initializing provider. Unable to complete login process due to delay in opening server connection
------------------------------
with Connection and General Timeout are both 0.
Appreciate the help
Gulden
i notice that in toolbox panel, there are these kind of different dataadapter and dataset, what is difference between them, and under which situation we use which one?
View 2 Replies View RelatedGuys,
I am having a nightmarish time getting an Oracle Connection Manager working as a source in my SSIS package.
The CM is called "OLTP_SOURCE". When I inspect the configuration and test connection, it succeeds, however when I go to run the package (both in debug mode and via DTEXECUI) I get the following error:
The AcquireConnection method call to the connection manager "OLTP_SOURCE" failed with error code 0xC0202009
After this happens, if I go into an OLE DB Source within a DFT, I get the following:
No disconnected record set is available for the specified SQL statement.
Now, if I go back into the CM, enter the password and test, it succeeds. From this point, I will go to preview the data in the OLE DB Source, and it comes back fine. However, when I go to run the package, I get the same error time and time again:
The AcquireConnection method call to the connection manager "OLTP_SOURCE" failed with error code 0xC0202009
The quick reader will suggest that the password is not being persisted. To this end, I have tried each of the following techniques to no avail:
1. Double, Triple and Quadruple check that the "save" password option in the CM is checked.
2. Hardcode the connection string in the dtsx XML-behind.
3. Enable Package Configurations and hardcode the connection string in the dstsconfig file.
4. Run the dtsx file using DTEXECUI, providing it with the configuration (that includes the hard-coded password).
5. Run the dtsx file using DTEXECUI, providing it the connection string in the Connection Managager override UI.
Can anyone help shed some light on what might be going on? So far, it is obvious that there has to be something that I am doing wrong because (syntax dialect differences aside) I can't imagine that Oracle sources should be this much of a headache.
Thanks,
Rick
I have several SSIS packages that test out without problems on my dev box when connecting to an Oracle server, both from inside BIDS IDE and from the command line with DTexec. The problem happens when running these packages from the app server that will be used for production; the packages get through the validation, preparation and pre-execution phases but crash when starting the execution phase with this error:
" Code: 0xC0202009
Source: Import Level tables Level1 Source [1261]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E07.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E07 Description: "ORA-01861: literal does not match format string".
I've Googled this and it often refers to a date issue. I am not writing to Oracle but importing to SQL Server by using SSIS import tasks, and my question is why would this work without problems from my box but not on this app server? Both machines have the same version of Oracle client installed. My box has the client SQL server with BIDS and the app server only has the full version of SSIS without SQL Server installed. At this point I'm trying to determine if this is an Oracle issue or SSIS. Any ideas?
Hi,
Previously i was using oracle8i with ssis.ssis was working fine.later i have upgraded 8i to oracle 9i.now when ever i try to establish a new connection using Microsoft OLEDB Provider for Oracle.i am getting the following error "Oracle error occurred, but error message could not be retrieved from Oracle" .but i am able to access the oracle 9i database thru pl/sql and toad. what could be the problem?
Thanks
Jegan.T
Trying to used DTS from SQL Server 7 to import a table from Oracle 8 DB to SQL Server. SQL Server has Oracle 8 connectivity installed and a database instance setup. Connection using the instance works from Oracle Enterprise manager and all Oracle tools. The MS OLEDB provider for Oracle fails to connect : could not resolve service name. I have this working on a different server with the same setup (SQL Server 7 SP 2 + All Oracle 8.0.5 connectivity).
WHAT AM I MISSING?
Windows 2003(64bit) server, SQL 2005 Server(64bit), Oracle client 10G rel2 (64bit) is installed. But when I am going to create a datasource to the Oracle database the Oracle OLEDB Provider is missing, the only Providers avaliable is from Microsoft.
I have tried to install ODAC (64bit) with no result.
Anyone who have come across this problem and how do I do to resolve it?
BTW! Is there a way to try communication with the OLEDB provider from the commandprompt?
hi,
i am using oledb to connect to oracle.
i want to know if there is a way to handle different character sets in this type of connection. for sql to sql, i have been using auto translate in the connection string.
what about for sql oledb to oracle? how can i make sure that the data from sql to oracle is transferred as is?
many thanks.
HI,
I want to use the OLEDB command to call a oracle function, but i havnt found any materials about how to do that, my oracle function is as below:
CREATE OR REPLACE function GET_ZONEID_FROM_SYFZ(ycz varchar2,xc varchar2,strat_id varchar2)
return varchar2 IS
zone_id_result varchar2(10) ;
begin
PKG_DM_DQ.GET_ZONEID_FROM_SYFZ(ycz,xc,strat_id,zone_id_result);
return zone_id_result;
end;
In OLEDB command transformation component, i fill the sql command with "select GET_ZONEID_FROM_SYFZ(?,?,?) from dual", but i dont have it worked.
The error message is :provider can not derive parameter information and setparameterinfo has not been called.
Who have any idea about how to make it work?
Thanks ~~
Hi,
1. If I have millions of rows to be compared, then which cache type is prefereed for lookup, Partial or no caching?
2. If I have lookup connected to Oracle Oledb, cache type as partial and SqlCommandParam as following
select * from (SELECT ORDER_ID, OPER_KEY, STEP_KEY, SUM(OCCUR_COUNT) AS OCCUR_COUNT FROM SFWID_OPER_DESC_EXPLD GROUP BY ORDER_ID, OPER_KEY, STEP_KEY) refTable where refTable.ORDER_ID = ? and refTable.OPER_KEY = ? and refTable.STEP_KEY = ?
then it doesn't allow me to add the parameters from Advance tab of Lookup transformation edition, and raises following error
"Provider cannot derive parameter information and SetParametInfo has not been called"
what am I missing?
Hi All:
I am using oracle oledb drivers to write to a oledb destination.
if i give decimal values to decimal fields in the source table, i get the same in destination. But if the input is integers, in some cases, the value in the destination is different from that of source
Source Target
50 50.00
100 0.000
111 111.000
600 0.0000
520 20.00
178 178
4546.50 4546.50
I have Sql server SP2 9.0.3042 installed on my machine. Please let me know if theres something i am missing out.
Thanks,
Vipul
Provider cannot derive parameter information and SetParameterInfo has not been called. (Microsoft OLE DB Provider for Oracle)
I am getting the above error while opening the parameter box at OLEDB source for Oracle using SQL command option at Data Access Mode?? Can you any one please help me in this regard and trouble shoot this problem..
Hi All:
I have a SSIS which have a main connection to a SQL Server 2005 DB, and also another connection to a Oracle database, and fetch data from the Oracle db.
I have the 2 connection managers, and everything runs fine when I test it in dev studio.
However, once I imported it to the DB, and run it on command line, I get the "Class not registered" error.
Log file as follows:
C:>dtexec /DTS "MSDB ST1INST101CRDA_D_GIM_CONN_TEST" /SERVER crpnycmsq34q /CONNECTION "CRD_CM";""Data Source=crpnycmsq34qST1INST101;Initial Catalog=CRD;Provider=SQLNCLI.1;Integrated Security=SSPI;"" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING V
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.3042.00 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 1:23:53 PM
Info: 2008-02-28 13:23:53.91
Code: 0x40016040
Source: CRDA_D_GIM_CONN_TEST
Description: The package is attempting to configure from SQL Server using the configuration string ""CRD_CM";"[dbo].[CMG_SSIS_CONFIG]";"GIM_SOURCE";".
End Info
Info: 2008-02-28 13:23:54.03
Code: 0x40016040
Source: CRDA_D_GIM_CONN_TEST
Description: The package is attempting to configure from SQL Server using the configuration string ""CRD_CM";"[dbo].[CMG_SSIS_CONFIG]";"GIM_USER";".
End Info
Info: 2008-02-28 13:23:54.05
Code: 0x40016040
Source: CRDA_D_GIM_CONN_TEST
Description: The package is attempting to configure from SQL Server using the configuration string ""CRD_CM";"[dbo].[CMG_SSIS_CONFIG]";"GIM_PWD";".
End Info
Error: 2008-02-28 13:23:54.55
Code: 0xC0202009
Source: CRDA_D_GIM_CONN_TEST Connection manager "GIM"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2008-02-28 13:23:54.56
Code: 0xC00291EC
Source: Execute SQL Task Execute SQL Task
Description: Failed to acquire connection "GIM". Connection may not be configured correctly or you may not have the right permissions on this connection.
End Error
Warning: 2008-02-28 13:23:54.58
Code: 0x80019002
Source: CRDA_D_GIM_CONN_TEST
Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 1:23:53 PM
Finished: 1:23:54 PM
Elapsed: 1.547 seconds
I DID TRIED MY BEST to search before posting, and most of them are having problem with 32 bit and 64 bit executions.
However, in my case, both are 32 bit (as shown in the log file).
In the above test, I'm setting DoNotSaveSensitiveData, and then fetch it with package configuration.
To make sure the package configuration is not creating pblm for me, I also tried to hardcode everything in the package, and then encrypt the whole ssis with password, and run the package with the /DECRYPT option, so that everything is already intact.
But I still get the same error. Log file as follows.
C:>dtexec /DTS "MSDB ST1INST101CRDA_D_GIM_CONN_TEST" /SERVER crpnycmsq34q /De "painful" /CONNECTION "CRD_CM";""Data Source=crpnycmsq34qST1INST101;Initial Catalog=CRD;Provider=SQLNCLI.1;Integrated Security=SSPI;"" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING V
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.3042.00 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 2:24:25 PM
Error: 2008-02-28 14:24:27.11
Code: 0xC0202009
Source: CRDA_D_GIM_CONN_TEST Connection manager "GIM"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2008-02-28 14:24:27.14
Code: 0xC00291EC
Source: Execute SQL Task Execute SQL Task
Description: Failed to acquire connection "GIM". Connection may not be configured correctly or you may not have the right permissions on this connection.
End Error
Warning: 2008-02-28 14:24:27.14
Code: 0x80019002
Source: CRDA_D_GIM_CONN_TEST
Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 2:24:25 PM
Finished: 2:24:27 PM
Elapsed: 1.422 seconds
Can anyone suggest what is missing ?? or what can be done ??
Any pointers are greatly appreciated.
Thanks,
- Henry.
OS : Win7, 64bit
Software : Oracle Clients 32bit and 64 bit (11g), SSIS 2012
I have installed both 32bit and 64bit oracle ODACs during the clients installations, and then i have installed the ssis 2012.
When i open .udl file i can see the 'Oracle Provider for OLE DB' provider and connect to the oracle db.
When i try to open new Ole DB connection in the ssis the 'Oracle Provider for OLE DB' is not listed under the 'Native Ole DB' providers.
i tried to reinstall both ODACs of 32 and 64 bit of the oracle but still the provider is not listed under the ssis providers.why ?
Hi,
I am trying to establish a connection to an Oracle database using the following code in a script task:
Dim oOleDbConnection As OleDbConnection
Dim sConnString As String = _
"Provider=OraOLEDB.Oracle;" & _
"Data Source=DBxxx;" & _
"User ID=Userxxx;" & _
"Password=Passxxx"
oOleDbConnection = New OleDb.OleDbConnection(sConnString)
oOleDbConnection.Open()
When I execute the script task, I receive the following error:
The 'OraOLEDB.Oracle' provider is not registered on the local machine.
Am using the correct provider?
I do not know how to resolve the said error.
Here are some facts:
Oracle 8i is installed.
Tnsnames.ora is updated.
I have successfully connected to Oracle SQL *Plus to test the above credentials.
Please help.
Thanks.
I need to extract rows using date as parameter... where source contains millions of rows but few thousands per date.
I tried using SQL command in data access mode in OLE DB Source Editor but having problem with passing parameter...
Anyone has solution?
Hi,
I'm trying to use query parameters with an Oracle OLEDB Source in a data
flow task and I'm having problems.
I've tried formatting the query each of the following ways...
--
select
frq_code,
frq_name,
update_frq,
uptime_frq
from frequency_bcs
where update_frq > ?
and update_frq <= ?
--
Parameters cannot be extracted from the SQL command. The provider might not
help to parse parameter information from the command. In that case, use the
"SQL command from variable" access mode, in which the entire SQL command is
stored in a variable.
Additional information
---> Provider cannot derive parameter information and SetParameterInfo has
not been called. (Microsoft OLE DB Provider for Oracle).
Hi,
Urgent Help required..........
Can anyone explain me steps how to parameterized query to send oracle.
If you know any other control which help to do this rather than OLEDB source.
Please let me know.
THanks
I need to delete some records in a Oracle RDBMS based at a SQL Server's query. I'm using the follow structure SSIS's package:
View 4 Replies View RelatedHi,
I want to connect to Oracle from MS SQL Server.
Is it possible?
If yes, please guide me in this issue.
SALIH KM
I want to call "oracle" stored procedure with output parameter from SSIS ole db command task.
Actually I am able to successfully call the procedure but my Output value is not updating in the mapped column.
I used below PL/SQL query.
DECLARE
IS_VALID VARCHAR2(200);
BEGIN
IS_VALID(
PARAM1 => ?,
PARAM2 => ?,
IS_VALID => IS_VALID
);
? := IS_VALID;
END;
If I try to supply "OUTPUT" word I get error:
"ORA-06550: line 1, column 45:
PLS-00103: Encountered the symbol "OUTPUT" when expecting one of the following: . ( ) , * @ % & = - + < / >"
BEGIN
IS_VALID(
?,
?,
? OUTPUT
);
END;
how to receive output parameter value of oledb command while calling oracle stored procedures.
Hi, i need to build some way of connecting Oracle to SQL Server in order to pull data off Oracle and house it temporarily on SQL 2000 for searching.
Basically we've built an intranet using ASP and SQL 2000 and which also pulls data off Oracle, however our connection to Oracle is very slow so an idea to speed it up would be to have SQL store a temporary snapshot of this data and the ASP site query off the fast connection it has to SQL rather than use our slow connection to Oracle.
This temporary snapshot of Oracle data would be stored on SQL 2000 and updated on a scheduled basis.
Any ideas how to do this, or a better way to work this?
Thing is I tried installing the Official Oracle ODBC & Client software on our SQL 2000 server before and it just took out SQL 2000 so would really like to hear other options.
Thanks in advance,
:confused:
Hi,
I am new to using SSIS (after using DTS on SQL Server 2000 for many years).
I am trying for the first time to connect to an Oracle 9.2 database and export data from it into SQL Server 2005.
I used the Microsoft OLE DB Oracle Provider to connect to the Oracle instance. The test connection works fine, but when I try and preview a table or copy data from Oracle I get the error....
The component reported the following errors
Cannot retrieve column code page
Has anyone got any ideas how I fix this?
Many thanks
Pete