I have a DTS that pulls a file from a networked drive (generally using the u: designation) for part of its process. Recently, the server has been dropping network drive connections, so sometimes the DTS will fail (I'm not certain why it's dropping the connections, nor do I have the access or control to figure out such.)
I've been told that I should change the DTS package to use an explicit path (i.e., \serverfolder1folder2file.mdb instead of u:folder2file.mdb) to work around this problem. However, Enterprise Manager doesn't seem to like using this for the "File name" attribute in the connection properties. (This is an Access connection, if that matters.)
Is there any way to get the explicit path (probably the wrong terminology here) to work with the connection properties?
When I restart a machine, the following message appears, note that theSQL Server status icon in the server tray has a blank circle:The network path was not found.When I double-click on the SQL Server status icon in the system trayand select the SQL Server from the SQL Server Service Manager everthingworks fine. Does anybody know whats causing this and how to fix it?
I am trying to use a file system task to create a directory. The error indicates that the path does not exist. But isn't that what the task is for: Creating a path (essentially a set of related folders)? Here is the path as supplied via variable:
\Computernamecommon3 Day StorageHWillamkeygrip
Anything obviously wrong?
BTW, I have no control over the fact that there are spaces in this path
When I try to create a new database on a network path, I get the following error:
"\server est estdatabase.mdf" is on a network path that is not supported for database files.
Am I trying something that isn't possible? Should databases always be stored on the server PC running SQL (Express)? I'm using Visual Basic Express and SQL Express (installed on a local PC not the server, so the connectionstring is ".SQLEXPRESS"), TCP/IP is enabled.
I have two, probably related, problems:I have a very simple site. It will be used on the local intranet only. I want to use the windows authentication so users do not have to log on. The aspnetdb has been created using the configuration tool. If I use Server Explorer in vs to work on the site on my local machine, I can open aspnetdb, look at its tables, etc. If I use Server Explorer in vs to work on the site on the server, aspnetdb will not open and gives this error message: ..."network path that is not supported for database files"...Other sites on the same server give the same message, but the sites work. I think this is because they can read the file but not write it; but that is a guess. We have tried everything; my head is ready to explode. We are using SQLServerExpress. It resides on the server's C drive (as does our data database). The web site, and hence the aspnetdb are on the F: drive of the same machine. Does SQLServerExpress treat the F: drive as a UNC drive? If so, are we in deep doo doo? I'm at a loss.As far as logging in: If I debug from vs, the login works beautifully both on my local machine and running from the server using vs. Login does not work when accessing the site from iexplorer. Mystified by that one, too. I tried to implement profiles and they crash, too; that led me to consider a write problem.Don't know what to do; any help is appreciated.
Hello, Completely new to this stuff, so sorry if I'm asking something that is painfully simple to resolve!!! Also, not sure whether there are standard formats for code, errors etc.
OK. When I create a Login.aspx file in VWD Express on my local Hard Disk Drive, the file works and runs correctly, allowing me to log in etc. However, when I do exactly the same thing using a remote Network Drive connection to an Intranet server, when you enter the Username and Password, and Click the Log In Button, the following error message appears:-
The file "[Network Drive]AuthorsApp_Dataaspnetdb.mdf" is on a network path that is not supported for database files.An attempt to attach an auto-named database for file S:AuthorsApp_Dataaspnetdb.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share. Then I get the following information - which I'm sure is supposed to help, but doesn't!!!
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: The file "S:AuthorsApp_Dataaspnetdb.mdf" is on a network path that is not supported for database files.An attempt to attach an auto-named database for file S:AuthorsApp_Dataaspnetdb.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): The file "S:AuthorsApp_Dataaspnetdb.mdf" is on a network path that is not supported for database files.An attempt to attach an auto-named database for file S:AuthorsApp_Dataaspnetdb.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +115 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +346 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +3244 System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +56 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +1083 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +272 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +687 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +82 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +558 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +126 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +651 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +160 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +122 System.Data.SqlClient.SqlConnection.Open() +229 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +114 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +225 System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1105 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +157 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +68 System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +100 System.Web.UI.WebControls.Login.AuthenticateUsingMembershipProvider(AuthenticateEventArgs e) +100 System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +113 System.Web.UI.WebControls.Login.AttemptLogin() +178 System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +134 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +56 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +107 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +178 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +31 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +32 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +72 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3838
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
We installed the SQL Server 2012 GUI tools, including "Upgrade Advisor," on a new virtual machine. We can connect to the old SQL Server 2008 R2 clustered databases just fine over port 1433 using SQL Server Management Studio 2012, but Upgrade Advisor is a mixed bag. Here are the steps we are taking:
- Click on "Start," "All Programs," "Microsoft SQL Server 2012," "SQL Server 2012 Upgrade Advisor"
- Fill in the server name with a valid SQL Server Network Name
- Select "SQL Server" as the only component to be analyzed
- Fill in the instance name with a valid named instance
- Use Windows Authentication (the default)
- The "SQL Server Parameters" window displays valid database names, meaning that we have a successful connection to the desired SQL Server instance at this point
- Leave all of the databased selected (the default)
- Click the "Run" button
- The "Upgrade Advisor Progress" window spins for a while and eventually generates the following error:
TITLE: mscorlib ------------------------------ The network path was not found. ------------------------------ BUTTONS: OK ------------------------------
Why would Upgrade Advisor be able to display the database names after making a successful connection only to fail later saying that it cannot find the network path?
I am trying to restore database from network drive but sql server 2005 express is giving error "system.data.sqlclient.sqlErroratabase <dbname> cannot be opened due to inaccessible files or insufficient memory or disk space (microsoft.sqlserver.express.smo)." But when I restore database from "C:" or local drive it alows to do so. Can anyone help.
Hello, I've built an application using c#, visual studio 2005 and sql server 2000. The database is sitting on another machine on the network. When I test the application from visual studio, it all works fine - no problems connecting to the database etc. However, If I publish the website and move it to the same server as the database and set up the site and users through IIS etc, I get the following error Login failed for user 'NT AUTHORITYNETWORK SERVICE'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'NT AUTHORITYNETWORK SERVICE'. my connection string is <connectionStrings> <add name="cashinsConnectionString" connectionString="Data Source=Londevs;Initial Catalog=cashins;User ID=Cash; Password=Cash123;"providerName="System.Data.SqlClient" /> </connectionStrings>
Anyone have any ideas why this is happening? Thanks
Hi,I'm trying to use one of my machines as a database server, just for local network testing/development etc. This machine/server is on my local network via a router.Can anyone advise me of how, when using VS 2005 Beta 2, to connect to my SQL Server 2005 installation on the server running on my network. ? In the 'add connection' dialogue, what do I put in the 'Server name:' field, (apart from server name...) is it the name of the machine or the IP address of the machine on the network ?Any and all advise appreicated.Thanks in advance.
I am working on a computer connected to a network. I am using SQL 2000/XP on my computer so I can manage other sql servers on our network (I'll call them S1 and S2, both running SQL 2000)
I recently received a new computer running SQL 2005 Standard/Vista. When I try to connect to S1 and S2, I can’t find them anywhere. Am I overlooking some settings in 2005/vista?
I am a little inexperienced at this, so please let me know if any additional information would be helpful.
I have read many posts and documentation on the subject but have not been able to find the answer.So I am posting here in hope that someone could give me good answer.
We are developing an ording system in my company and with weborderingsystem and an backoffice system. We use windows2k3 where sqlserver 2005 is installed and running with our database. Our webapplication is working with this database and is connected to it. This works fine. I am developing backofficepart whick is an C# application and point of this app is that user can check out sent orders, look up orders and customers.
i use C# express to develop this, and use database explorer to try to connect to my the database.
My machine is running WinXp pro and server is win2k3 with SQL Server 2005 on it.
I get this error:
"The file \810....... is on a network path that is not supported for databasefiles....
Can anyone give me an answer to tell me if this is possible at all or give me an suggestion on how to go about hsi problem. I need my application to connect to another machine on the network that is running SQL server.
I'm trying to connect to an instance of MSDE 2000 from Visual Studio 2005 over a home network. Although I know how to connect to a database from Visual Studio, I'm pretty clueless about configuring Sql Server to allow the connection (I can connect with no problem when I do so from the same computer). Also, with experimenting I've created a bunch of instances of Sql Server that I don't really need and am not sure how to get rid of them. Thanks in advance for any help.
-Dave
I don't know if this will help, but I've already tried enabling all of the network protocols in the instance. Also, I can easily connect to an Access database over the network.
I am running my package in sql server 2012, in which i am giving network path for flat file destination. And its working fine. But if i give m local path, its giving me error " cannot open data file" ...
I have a VB 2003 .NET application that I wrote for a customer that connects to a named instance of SQL 2000. Until recently it has been working fine. Lately the program either pops a timeout failure within a few seconds or a general network error. I've increased the connection timeout settings to 90 seconds but the error still pops within a few seconds. I'm thinking something has changed in the environment that prevents a clean connection to the named instance of SQL server.
How should this issue be troubleshoot to determine the problem and what areas need to be looked at?
When trying to install Business Contact Manager (BCM) for Outlook 2007, the setup failed and I was refered to a log file in my Local Settings/Temp folder. The log actually says that Business Contact Manager was installed sucessfully! BCM is supposed to install SQL Express 2005 as an instance or as instance if SQL Express is already installed. There is an MSSMLBIZ instance in Services..
Who can I send the Log File to for analysis and the fix feedback?
When I first went into Computer Management and clicked on Services and Applications in the left panel, the error message appeared "Snap-in failed to intialize. Name: SQL Server Configuration Manager CLSID:{CA9F8727-31DF-41D2-975C-887D84903967} This message diappeared when I clicked on Services and Applications again. Under Services, there are 3 SQL services - one is an application that was uninstalled 3-4 weeks ago and I disabled this service. The other 2 are: SQL Server (MSSMLBIZ) and the other one is SQL Server (SQLEXPRESS) When I tried to start either of the last 2, the message appeared: Services "Could not start the SQL Server (MSSMLBIZ) service on Local Computer. Error 3: The system cannot find the path specified. Under Program Files/Microsoft SQL Server/MSSGL.1 folder is mostly empty. So, it seems like the Path in the Registry is not valid and that nothing is being installed in the MSSQL.1 folder. If so, how do I fix this?
How do I get the BCM SQL instance to install and run properly? what do the messages in Services mean and how do I resolve these.
After updating TempDB path to a wrong path (without file name only folder name) the service is not starting. How can i sovle this and start the service
I get the following error and have been trying to figure out why I keep getting it. Initially, I had placed my project under wwwroot folder and ran it under IIS and it gave this error. Then I moved it to my local C drive and same thing. I am sharing this project with two other co-workers and all our config files and code files are same...they don't get this error but I do. I checked that SQL Server Client Network Utility has TCP/IP and the 'Named Pipes' enabled. I thought maybe I have setting in the Visual Studio 2005 that I'm not aware of that's causing this problem...it can't be the server since my co-workers aren't having this error and can't be anything in the code since all of us are sharing this project through vss. I dont' think using different version of .net framework can create this error. I changed the version from 2.0 to use 1.1x and it gave same error... Any help would be greatly appreciated. Thanks in advance.
Server Error in '/RBOdev' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197 System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.GetConnectionHolder() +16 System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.LoadPersonalizationBlobs(WebPartManager webPartManager, String path, String userName, Byte[]& sharedDataBlob, Byte[]& userDataBlob) +195 System.Web.UI.WebControls.WebParts.PersonalizationProvider.LoadPersonalizationState(WebPartManager webPartManager, Boolean ignoreCurrentUser) +95 System.Web.UI.WebControls.WebParts.WebPartPersonalization.Load() +105 System.Web.UI.WebControls.WebParts.WebPartManager.OnInit(EventArgs e) +497 System.Web.UI.Control.InitRecursive(Control namingContainer) +321 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +692
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
We have a Windows 2003 Web Edition server serving a site through IIS. It connects to a Windows 2003 Standard Edition server running SQL 2000 SP3a.
This site receives the following error as seen in the topic: [DBNETLIB][ConnectionRead (recv()).]General network error. Check your network documentation.
We've configured the server network utility to only allow TCP/IP connections. The connection string for the site is as follows:
Any ideas or tips on solving this issue? We've noticed it is due to larger queries as smaller ones do work with no problems.
The servers are behind a BSD box running iptables, has 1433,1434 along with standard web ports wide open. Anything outbound is allowed.
Some further testing via ODBC on the IIS server improved things. No more connection pooling for the SQL Server driver allows for 1/3 of the query to run. Still 2/3s of it doesn't show up, and that general network error message appears.
Hi While running a DTS, many times the error message: "[DBNETLIB][ConnetionWrite (WrapperWrite()).]General network error. Check your network documentation." appears. Does somebody knows why?
I am running the DTS from a computer (not the server where the DTS is stored) and it is connected without any problem when this happens.
My application is running fine, as i can login to it and also able to view pages. But when i open Order management(having 3K records) its give me error,
General Network Error. Check your network documentation
I have also searched many articles and tried following solutions but nothing working
- connectiontimeout = 0, max pool size = 7500/100, pooling = false
- SSL disabling enforce security false as mentioned in microsoft kb article.
And there's nothing any issue with hardware/firewall as my application's login and other forms are working fine(which use same database with same connection string)
Hi We have a written a error log in Global.asax. which capture below mentioned error in the prodcution server. Same applications is working fine in some locations and some loactions we are getting the error.Any body knows why this error is occurs.Any body knows why this error is occurs. Error Message:General network error. Check your network documentation.Stack Trace: at System.Data.SqlClient.SqlInternalConnection.OpenAndLogin() at System.Data.SqlClient.SqlInternalConnection..ctor(SqlConnection connection, SqlConnectionString connectionOptions) at System.Data.SqlClient.SqlConnection.Open() at datalayer.sqldb.Execute(String ProcedureName, SqlParameter[] Parameters) at lms.User.GetUserDetails(String strUserid)ITs at LMS.Login.w_btn_Login_Click(Object sender, EventArgs e) at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
Hi,I am using .Net 1.1 for my web application.And my database server is SQL Server 2005. My application is running fine, as i can login to it and also able to view pages. But when i open Order management(having 3K records) its give me error,General Network Error. Check your network documentation I have also searched many articles and tried following solutions but nothing working- connectiontimeout = 0, max pool size = 7500/100, pooling = false- SSL disabling enforce security false as mentioned in microsoft kb article. And there's nothing any issue with hardware/firewall as my application's login and other forms are working fine(which use same database with same connection string) Can any one please help me to solve this error?
When I try to update the site setting, I get this Error and I don't know how to fix.
Server Error in '/DotNetNuke' Application. --------------------------------------------------------------------------------
General network error. Check your network documentation. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: General network error. Check your network documentation.
Source Error:
Line 281: Line 282: myConnection.Open() Line 283: myCommand.ExecuteNonQuery() Line 284: myConnection.Close() Line 285: End Sub
-------------------------------------------------------------------------------- Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
Hi I get a "General Network Error Check network documentation" error sometimes, but its only while insert or update statements are fired while selects keep working perfectly.
The Error details are as follows: General network error. Check your network documentation. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: General network error. Check your network documentation. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException: General network error. Check your network documentation.] System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream)
i have a situation, where i need to group my information by a certainid, but that information which should already be grouped, i need toorder based on a number in one of the columnsexample:<ex id=2 listorder=1><description>desc 2</description></ex><ex id=1 listorder=2><description>desc 1</description></ex>in my order clause i first put order by the id, and it will group theinformation accordingly, but will put the lowest number id first, notcaring about the listorderbut if i order by the listorder column first, the information isn'tgroupd properlyi don't know if i made myself clear enough?hope someboyd can help methnx in advance
I don't know MS-SQLserver internal system at all. I 've just used Oracle a couple years ago and so in some cases (e.g using TP-monitor MTS or Tuxedo) you can switch off the implicit transaction by using the option AUTOCOMMIT ON/OFF.
How can switch off the implicit transaction system on MS-SQLServer ?
