Connection String Has To Be Reset Every Time When DTS Package Is Started
Mar 31, 2006
Hi All,
I am trying to import data from flat file to sql server 2005 DB table using SSIS. There are 4 different text files in the input folder. I am using for loop to iterate reading and importing 4 times. In order to do this I have set "Connection String" property of a connection manager to a package level variable using expression. There is a script which supplies the source file name and assigns to this variable.
The package works fine. The data gets imported successfully into the destination table. However, when I close the package, reopen it and then run, the Data Flow task fails with the error "Can not open the source file". If I enter a valid file name in the Flat File Source task and run the package it works again. As soon as I close the file/package, reopen and then run, the data flow task fails with the same error.
How do I make this working. I am planning to schedule a job which will execute the package programatically. In that case no user intevention is possible.
I would appreciate your help on this. I can provide further details if required.
-SGK
View 13 Replies
ADVERTISEMENT
Jul 6, 2006
Dear All,
I now have two SSIS package, "TESTING" and "LOADING". The "TESTING" package have an execute package task that call the "LOADING" package. When I want to execute the TESTING package, how can I setup the connection string so that I can edit the password of the database connected by the "LOADING" package?
Regards,
Strike
View 8 Replies
View Related
Jun 29, 2006
I am using execute pacakge task to execute another package . I am giving the Connection string for the package to execute. It works fine in my development machine but when i try to run in another server after i deployed it. It looks for the datasource path of the DTSX file in the same location.
how do i set the path according to each server where the dtsx file is stored. or any other method of storing it like connection string.
if i store it in theparent package variable where should i point to...
thanks
aa
View 1 Replies
View Related
Apr 12, 2007
I have a simple package, which reads a flat file source, does some transformation, and outputs to a flat file destination. The package runs as a SQL Agent job, so I have the flat file source and OLEDB connection ticked and configured on the data sources tab.
What I would like to do is get hold of the flat file source connection string property from inside the package at run time, and use it to set the flat file destination connection string using property expressions.
The easy option is to set the destination in the agent job, but I'd like to add a date/time stamp to the destination filename.
Is this possible?
Thanks,
Greg.
View 1 Replies
View Related
Feb 5, 2007
Hi!
I create a SSIS Package for ETL on my own machine. During development database was also on my machine. For access to this database an OLE DB connection was defined within a package in BI Development Studio. Everything worked well both in debug mode and testing package itself.
Finally I need to load data to a database on a different machine using this package.
I used several scenaries:
1) simply copied the package-file to estination machine, open it for execution, in section "Connection Managers" I edited connection string manually - changed server name and Initial Catalog. And try to execute.
2) on the destination machine I manually created an OLE DB connection (using Microsoft Data Link) to a different database (test succeded), Changed the extention of the connection file 'udl' for ' txt ' and copied its connection string to the field connection string in section "Connection Managers" (pointed in variant 1) ).
3) use Package Configurations, copied the deployment to destination machine, installed the package the way like written here - http://msdn2.microsoft.com/en-us/library/ms365338.aspx. Changed exported properties - Server name, Initial Catalog and also the whole Connection String. Also try to execute.
In all cases I recieved the same error execution message :
"Errors in the metadata manager. Either the database with ID of " OLD_DATABASE_NAME " does not exist in the server with ID of " NEW_SERVER_NAME " or the user does not have permissions to access the object."
As for access (username/pass) settings they are the same for both of them, I have the same administrative rights on both machines. And more with the same rights the ole db connection made was made manually in variant 2 - succeded!!! So I don't think the problem is here.
As for Error message - I think somewhere the OLD name of database (Initial Catalog) is saved, though I tried to change it. Though the NEW value for the server name is substituted.
Please, help me. I don't know what else can I try. And it is not a single case for my practice. So I think - something wrong in my actions.
View 9 Replies
View Related
Jan 12, 2008
I'm new to SSIS. Is there some way to change the connection strings used by a package installed in MSDB? We created a package using the Import wizard in SQL2005, but now the source Access mdb file has moved. I tried using Mgt. Studio Object Explorer to connect to SSIS to look for the properties of the package, but right-click on the package name does not offer a Properties option. I understand the package editor is now in Visual Studio, but I was unsuccessful opening the installed package in VS.
View 6 Replies
View Related
Jun 23, 2006
hi!
I want to store the value of the Connection String in an Common table exisiting for the whole project and retrieve it for the whole package to Run. I want to know if there is a way of doing this.
I do not want to have a config file which is created trhough the package configuration.
In case of Parent package variable the Value of the variable needs to exist which again needs to execute the SQL Task which requires a connection string.
In case of Environment variabIe.I have very less knowledge about the environment variable . Even if we store it? how can we access it and change it in client place.
In case of SQL server . Can we store in an existing table. what is the configuration filter? what is the vlaue for it.
I do not want to execute any command line.............................
Thanks,
jazz
View 2 Replies
View Related
Jun 19, 2006
Hi
I need help for Connection string:
Requirement: When we create SSIS Pacakge using Businessinteligence studio.Each Source and Destination or whatever we using the Control required DB Connection.
we connect theDB server and Database Table through manaully .Instead of Manual i need dynamic Global varible for Connection String .How to achieve this connection string.
because suppose we create SSIS Package in Developement Server Latter We change the Server from Developement to Another Testing Server . at that time we dont requierd for changing manulay.any one pls reply me.
Same as in Dotnet we give configiration XML file .we gave the Connection strng. how to in SSIS we do?
Thanks & Regards
M.Jeyakumar
View 9 Replies
View Related
Jul 30, 2015
I am in between of creating a dynamic SSSIS package which will run for multiple zones having different source connection.My source is in Oracle.I am having 3 DFT with the 3 different source tables.I want to create a package with above DFT dynamically so that my single package can run for the entire zone with dynamically source connection change.I have created a Master table which stores the zone source connection string and zone name. I have 2 different connection.so if in future any new zones come so only newly zone details need to be add in master table without opening the package.
View 3 Replies
View Related
Jan 18, 2008
I apologize in advance for posting yet another connection failure issue. I went through quite a few posts and could not find the actual answer so here is the issue. I have a main SSIS package to call five other packages. This seems to work fine in my BIDS workstation; however, when I copied it, including the bat file that was created by dtexecui utility, to the production environment (which runs on 64 bit - probably has nothing to do with the 64 bit platform), the main package executes fine but the child packages failed with this error:
Description: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult:
0x80004005 Description: "Login timeout expired".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult:
0x80004005 Description: "An error has occurred while establishing a connection
to the server. When connecting to SQL Server 2005, this failure may be caused by
the fact that under the default settings SQL Server does not allow remote conne
ctions.".
It seems that the child packages are still using the old connection strings from my workstation. My question is how can I pass the connection string from the batch file to all the child packages that the parent (main) package is using.
Thanks,
Andrew
View 5 Replies
View Related
Jul 12, 2012
I have create packages which loads the data from flat file to sql server table, now I want to make my destination table connection dynamic what is format of connection string. I also need to pass user name and password for sql server dynamically in this case, what is the format for the connection string.
Also  in package i used ADO.net  as source for  *.mdb files how i can set the commection to .mdb files dynamically which is used as source in my package.
View 8 Replies
View Related
Mar 5, 2007
When I go to Report > Report Parameters... in VS, I create date parameters and specify the type as datetime. I then add the parameters to my SQL statement. I then go back to look at the parameters and they have changed to string. This happens every time I make a modification to the SQL statement. Is this a bug, or am I missing a step? I thought someone would have asked this before, but I can't find a post for it in this forum.
Thanks in advance,
Scott
View 4 Replies
View Related
Sep 28, 2007
I'm having trouble receiving a file via FTP. I've done this before, so I'm surprised how much trouble I'm having. I'm getting the error:
[Connection manager "FTP Connection"] Error: An error occurred in the requested FTP operation. Detailed error description: The connection with the server was reset .
I've tried to FTP via Internet Explorer 6, and it works fine. I've tried going into the "FTP Connection" and putting in the password, and clicking "test connection"... works fine again.
Any ideas for me to troubleshoot? I've shut down the package and re-opened it, but to no avail.
View 3 Replies
View Related
Mar 26, 2008
Hi,
I posted the long version of this over on the ADO.NET framework group:
http://groups.google.com/group/microsoft.public.dotnet.framework.adonet/browse_thread/thread/51597180ec77f543/70e804505c2df829#70e804505c2df829
The short version is:
In .NET 2.0 SP1, Microsoft have deprecated the "Reset Connection" connection string API which, when set to false, stops connection pooling from calling "sp_reset_connection" on connections drawn from the pool. We need this for our DB security: we "EXECUTE AS" on connection open and since we cannot tell when it will close (passed to 3rd parties and there is no useful "closing" event), we must "REVERT" the connection next time it is drawn from pool e.g. OPENS. We must do the revert before sp_reset_connection is called or SQL Server kills the connection (security violation) - we accomplish this by keeping track of connections' SPIDs. We implemented this using EL DAAB + custom SQL provider which handled connection open event. Now it is entirely broken!
This all worked fine in .NET 2.0 RTM when we could control when sp_reset_connection was called (could delay until after revert). Now I've run out of options and will have to rewrite the entire security infrastructure. What I'd really like is a decent "closing" event on SqlConnection (statechanged will fire after close - too late!). As I asked in the full post above.. how are we expected to build scalable apps with the features that Microsoft tell us to use when they don't work together?
How can I REVERT my connection before it is sent back to the pool?
If any of this isn't clear, please see above linked post.
Many thanks,
Simon
View 1 Replies
View Related
Mar 23, 2007
Hi all
I have build an application on top of SQL Server 2005 and i am using microsoft driver. My application stops periodically becoz of Database Connection Loss and I get the following exception
com.microsoft.sqlserver.jdbc.SQLServerException: An exception occurred during the DBComms.transmit operation. Exception:Socket closed. Context:(5) [Thread[Thread-55,5,main], IO:7e2dc, Dbc:null].
10:06:14:703 AM at com.microsoft.sqlserver.jdbc.SQLServerException.ma keFromDriverError(Unknown Source)
10:06:14:703 AM at com.microsoft.sqlserver.jdbc.DBComms.transmit(Unkn own Source)
10:06:14:703 AM at com.microsoft.sqlserver.jdbc.IOBuffer.sendCommand( Unknown Source)
10:06:14:703 AM at com.microsoft.sqlserver.jdbc.SQLServerStatement.se ndExecute(Unknown Source)
10:06:14:703 AM at com.microsoft.sqlserver.jdbc.SQLServerStatement.do ExecuteQuery(Unknown Source)
10:06:14:703 AM at com.microsoft.sqlserver.jdbc.SQLServerPreparedStat ement.executeQuery(Unknown Source)
Unable to find the exact reason for the above problem. Pl advice
Thanks & Rgds
Roshini
View 1 Replies
View Related
Dec 21, 2005
I'm sure this has been asked previously and serached the forum with no luck. I'm using vb05-express to connect. I create the db in the folder the program executes from. The connection string is as follows;
Dim myCn As New SqlConnection
myCn.ConnectionString = "Server=.SQLExpress;Database=TestDb.mdf;" & _
"Integrated Security=True;" & _
"Type System Version=Latest;" & _
"User Instance=True"
myCn.Open()
The error msg is;
Cannot open database "TestDb.mdf" requested by the login. Login failed for "machinename'default.
Is this an authorization issue?
Appreciate any help you can provide
View 1 Replies
View Related
Jun 20, 2007
I see the following error randomly -
* SQLException during execution of sql-statement:
* sql statement was 'SELECT count(*) FROM PRODUCT_ATTRIBUTES A0 WHERE A0.PRODUCT_ID = ?'
* Exception message is [An exception occurred during the DBComms.receive method. Operation:Connection reset. Context1) [Thread[pool-2-thread-1,5,main],
IO:18563, Dbc:c67b9]. PktNum:0. TotalReceived:0. PktSize:4,096.]
* Vendor error code [0]
* SQL state code [08S01]
* The root stack trace is -->
* com.microsoft.sqlserver.jdbc.SQLServerException: An exception occurred during the DBComms.receive method. Operation:Connection reset. Context1)
[Thread[pool-2-thread-1,5,main], IO:18563, Dbc:c67b9]. PktNum:0. TotalReceived:0. PktSize:4,096.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
at com.microsoft.sqlserver.jdbc.DBComms.receive(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.doExecutePreparedStatement(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement$PreparedStatementExecutionRequest.executeStatement(Unknown Source)
at com.microsoft.sqlserver.jdbc.CancelableRequest.execute(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeRequest(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.executeQuery(Unknown Source)
at org.apache.commons.dbcp.DelegatingPreparedStatement.executeQuery(DelegatingPreparedStatement.java:93)
at org.apache.commons.dbcp.DelegatingPreparedStatement.executeQuery(DelegatingPreparedStatement.java:93)
at org.apache.ojb.broker.accesslayer.JdbcAccessImpl.executeQuery(JdbcAccessImpl.java:293)
at org.apache.ojb.broker.accesslayer.RsQueryObject.performQuery(RsQueryObject.java:72)
at org.apache.ojb.broker.accesslayer.RsIterator.<init>(RsIterator.java:189)
at org.apache.ojb.broker.accesslayer.ReportQueryRsIterator.<init>(ReportQueryRsIterator.java:45)
at org.apache.ojb.broker.core.ReportRsIteratorFactoryImpl.createRsIterator(ReportRsIteratorFactoryImpl.java:59)
at org.apache.ojb.broker.core.PersistenceBrokerImpl.getRsIteratorFromQuery(PersistenceBrokerImpl.java:2217)
at org.apache.ojb.broker.core.PersistenceBrokerImpl.getReportQueryIteratorFromQuery(PersistenceBrokerImpl.java:2252)
at org.apache.ojb.broker.core.PersistenceBrokerImpl.getReportQueryIteratorByQuery(PersistenceBrokerImpl.java:2177)
at org.apache.ojb.broker.core.PersistenceBrokerImpl.getCount(PersistenceBrokerImpl.java:2148)
at org.apache.ojb.broker.core.DelegatingPersistenceBroker.getCount(DelegatingPersistenceBroker.java:383)
at org.apache.ojb.broker.core.DelegatingPersistenceBroker.getCount(DelegatingPersistenceBroker.java:383)
at org.apache.ojb.broker.core.DelegatingPersistenceBroker.getCount(DelegatingPersistenceBroker.java:383)
at org.apache.ojb.broker.core.proxy.CollectionProxyDefaultImpl.loadSize(CollectionProxyDefaultImpl.java:154)
at org.apache.ojb.broker.core.proxy.CollectionProxyDefaultImpl.size(CollectionProxyDefaultImpl.java:268)
at com.serus.common.caching.FlyWeight.getCollection(FlyWeight.java:272)
at com.serus.common.caching.FlyWeight.intercept(FlyWeight.java:125)
at com.serus.dto.core.ProductDTO$$EnhancerByCGLIB$$52ef9193.getProductAttributes(<generated>)
at com.serus.manager.scm.ModelManager.getProductAttributeForProductIdAttributeName(ModelManager.java:1664)
at com.serus.inca.outbound.PNAdapter.processTemplate6_New(PNAdapter.java:910)
at com.serus.inca.outbound.PNAdapter.runChildAdapter(PNAdapter.java:144)
at com.serus.inca.outbound.WSBaseAdapter.runAdapter(WSBaseAdapter.java:114)
at com.serus.inca.outbound.WorkstreamProcessor.startProcessor(WorkstreamProcessor.java:375)
at com.serus.inca.outbound.WorkstreamProcessor.call(WorkstreamProcessor.java:152)
at com.serus.inca.outbound.WorkstreamProcessor.call(WorkstreamProcessor.java:78)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:269)
at java.util.concurrent.FutureTask.run(FutureTask.java:123)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:650)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:675)
at java.lang.Thread.run(Thread.java:595)
My database and driver details are as below:
Database Product Version 9.00.1399
Driver Name Microsoft SQL Server 2005 JDBC Driver
Driver Version 1.1.1501.101
Driver Major Version 1
Driver Minor Version 1
It is a AMD 64 bit 2 dual core machine which is deployed with jdk 1.5 update 10.
Has anyone seen this before?
Thanks
-giriraj
View 12 Replies
View Related
Apr 25, 2007
Hello all,
We have noticed in our environment slowness when starting SSIS packages from SQL Server jobs. I did a quite detailed study on when the slowness actually occurs and what are the consequences. Here are the results.
The SSIS package execution is slow if all the following is true:
The package is started from a job. If started directly as a SSIS package, the execution is fast.
The job is running on a 64 bit Windows Server (SQL Server 2005 SP2). The SSIS package and the job are either on the same server or on different servers (the second server is SQL Server 2005 SP1). If the job is run on a 32-bit workstation (Windows XP SP2) the execution is fast (the SSIS package still being on the server).
The package contains tasks.
§ If there are no tasks, just an empty sequence container, the execution is fast.
§ If a package that has no tasks has logging into the database configured, the execution is fast.
§ Slowness has been verified with A) a package having a single Execute SQL statement and B) a package having a Send Mail task.
It doesn't seem to matter which user account is used on when running the job.
The slowness happens in several locations, e.g. (there are also others, at least the following have been verified)
There is exactly 30 seconds lag between starting the job (as seen from job history) and when PreValidate (as seen in the sysdtslog90 table) of the package appears in the log.
The validation of the package takes 15 seconds (the time difference in the log betwen PreValidate and PackageStart)
The problem is really affecting our production environment. Currently the only solution we have come up is to put all the jobs on a workstation and use the workstation as a production server for the jobs.
I haven't heard anyone else having the same problem.
View 26 Replies
View Related
Mar 20, 2006
[Yes, I know I keep posting this, and I'm sorry for that. But I want someone to confirm that this is a bug and not by design. I feel it is very very important]
All,
I'd like someone from MS to confirm something for me if possible.
I've just come across a situation where a package that is restarted from a checkpoint fails to execute any of its eventhandlers if those eventhandlers are scoped to a parent container.
Is this a bug or by design? Either way I'm VERY worried about this because this is not in the least bit intuitive. This is the most dangerous bug that I have seen in RTM.
-Jamie
If you want a demo of this happening then download this package: http://blogs.conchango.com/Admin/ImageGallery/blogs.conchango.com/jamie.thomson/20060103Package1.zip
It doesn't need any configuration because there are no connection managers. You can just run it standalone.
Run it first time and it will fail but you WILL see msgboxes popped up by the eventhandlers. Go into "Script Task 2" and make the return value "Success" rather than "Failure".
Run it a second time. The package will complete successfully but NO msgboxes will pop up from the eventhandlers. They are not executing.
Reply here or email direct with any queries!
View 1 Replies
View Related
Mar 2, 2006
All,
I'd like someone from MS to confirm something for me if possible.
I've just come across a situation where a package that is restarted from a checkpoint fails to execute any of its eventhandlers if those eventhandlers are scoped to a parent container.
Is this a bug or by design? Either way I'm VERY worried about this because this is not in the least bit intuitive. This is the most dangerous bug that I have seen in RTM.
-Jamie
If you want a demo of this happening then download this package: http://blogs.conchango.com/Admin/ImageGallery/blogs.conchango.com/jamie.thomson/20060103Package1.zip
It doesn't need any configuration because there are no connection managers. You can just run it standalone.
Run it first time and it will fail but you WILL see msgboxes popped up by the eventhandlers. Go into "Script Task 2" and make the return value "Success" rather than "Failure".
Run it a second time. The package will complete successfully but NO msgboxes will pop up from the eventhandlers. They are not executing.
Reply here or email direct with any queries!
[Microsoft follow-up] This needs either fixing or explaining.
View 11 Replies
View Related
May 14, 2007
Hi guys, Im desperately hoping someone here can help me. Ive been trying to set up merge replication between 2 servers all weekend and it keeps failing. Im setting this up as follows
The Publisher/Distributor is a SQL Server 2005 machine, the database being replicated is 4gb, and the only subscriber is a SQL Server 2000 SP4 machine. I set up my publication normally, and set up the push subscription, adn set it to initialize immediately. It weill then start bulk copying and go on for about 3-4 hours before it fails and gives me the errors:
Error messages:
The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147201001)
Get help: http://help/MSSQL_REPL-2147201001
The process could not bulk copy into table '"dbo"."CONTENT"'. (Source: MSSQL_REPL, Error number: MSSQL_REPL20037)
Get help: http://help/MSSQL_REPL20037
An existing connection was forcibly closed by the remote host. (Source: MSSQLServer, Error number: 0)
Get help: http://help/0
One or more BLOB columns could not be sent to the server, attempt to recover from the problem failed. (Source: MSSQLServer, Error number: 0)
Get help: http://help/0
Communication link failure (Source: MSSQLServer, Error number: 0)
Get help: http://help/0
Unspecified error (Source: MSSQLServer, Error number: 0)
Get help: http://help/0
Failed to send batch after max errors (Source: MSSQLServer, Error number: 0)
This is driving me crazy as I havent slept in ages trying to get this fixed. Anyone have any idea whats going on? Its always one of 2 tables so far that keep failing, ContactLog and Content, what can I do?
View 3 Replies
View Related
Aug 23, 2006
I added a connection (ADO.NET) object by name testCon in the connection manager - I wanted to programmatically supply the connection string. So I used the "Expressions" property of the connection object and set the connectionstring to one DTS variable. The idea is to supply the connection string value to the variable - so that the connection object uses my connection string.
Then I added a "Backup Database Task" to my package with the name BkpTask. Now whenever I try to set the connection property of BkpTask to the testCon connection object, by typing testCon, it automatically gets cleared. I am not able to set the connection value.
Then after spending several hours I found that this is because I have customized the connection string in testCon. If I don't customize the connection string, I am able to enter the "testCon" value in the connection property of the BkpTask.
Is this an intrinsic issue?
View 2 Replies
View Related
Aug 5, 2015
We are facing issue on one of our databases on Availability Group replica. FYI, please refer the below messages we are receiving. Moreover, the errors don't happen consistently for the specified user.
The client was unable to reuse a session with SPID 420, which had been reset for connection pooling. The failure ID is 46. This error may have been caused by an earlier operation failing. Check the error logs for failed operations immediately before this error message.
Error: 18456, Severity: 14, State: 46.
Error: 18056, Severity: 20, State: 46.
Login failed for user 'XXXX'. Reason: Failed to open the database 'YYYY' configured in the login object while revalidating the login on the connection. [CLIENT: aa.bb.cc.nn]
View 0 Replies
View Related
Dec 26, 2014
I need to take a temporary table that has various times stored in a text field (4:30 pm, 11:00 am, 5:30 pm, etc.), convert it to miltary time then cast it as an integer with an update statement kind of like:
Update myTable set MovieTime = REPLACE(CONVERT(CHAR(5),GETDATE(),108), ':', '')
how this can be done while my temp table is in session?
View 2 Replies
View Related
Sep 27, 2007
Hi,
I'm having a BIG problem, this is my 3rd day looking for answer !I'm trying to create a custom membership provider with MS SQL database 2005 but not the default ASPNETDB. I've changed the web.config to be as following:<connectionStrings><add name="sqlConn" connectionString="Data Source=.;Integrated Security=True;Initial Catalog=ASPNETDB;"providerName="System.Data.SqlClient" /></connectionStrings> <system.web><trace enabled="true" /><roleManager enabled="true" /><authentication mode="Forms" />
<membership defaultProvider="MySqlProvider"><providers><remove name="AspNetSqlProvider"/><add name="MySqlProvider" connectionStringName="SqlConn" type="System.Web.Security.SqlMembershipProvider" applicationName="/" /></providers></membership>
But when I try to login to the site using the login control the following error occurs:
Server Error in '/etest' Application.
Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: The connection name 'LocalSqlServer' was not found in the applications configuration or the connection string is empty.Source Error:
Line 149: <roleManager>
Line 150: <providers>
Line 151: <add name="AspNetSqlRoleProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
Line 152: <add name="AspNetWindowsTokenRoleProvider" applicationName="/" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
Line 153: </providers>Source File: C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Configmachine.config Line: 151
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.213
It is clear that this is a prblem with my Machine.Config file - since I've "worked!" on this file for a while. But when I've checked the Machine.config file I've found the LocalSqlServer connection it is talking about! .
I'm lost and I dunno what to do, can anyone help?
Here is the mahine.config in case if you need it:<connectionStrings>
<add name="LocalSqlServer" connectionString="data source=.;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" /></connectionStrings>
<system.data><DbProviderFactories>
<add name="Odbc Data Provider" invariant="System.Data.Odbc" description=".Net Framework Data Provider for Odbc" type="System.Data.Odbc.OdbcFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" /><add name="OleDb Data Provider" invariant="System.Data.OleDb" description=".Net Framework Data Provider for OleDb" type="System.Data.OleDb.OleDbFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add name="OracleClient Data Provider" invariant="System.Data.OracleClient" description=".Net Framework Data Provider for Oracle" type="System.Data.OracleClient.OracleClientFactory, System.Data.OracleClient, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" /><add name="SqlClient Data Provider" invariant="System.Data.SqlClient" description=".Net Framework Data Provider for SqlServer" type="System.Data.SqlClient.SqlClientFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add name="SQL Server CE Data Provider" invariant="Microsoft.SqlServerCe.Client" description=".NET Framework Data Provider for Microsoft SQL Server 2005 Mobile Edition" type="Microsoft.SqlServerCe.Client.SqlCeClientFactory, Microsoft.SqlServerCe.Client, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" /></DbProviderFactories>
</system.data><system.web>
<processModel autoConfig="true" /><httpHandlers />
<membership><providers>
<add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="LocalSqlServer" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="/" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression="" /></providers>
</membership><profile>
<providers><add name="AspNetSqlProfileProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Profile.SqlProfileProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</providers></profile>
<roleManager><providers>
<add name="AspNetSqlRoleProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /><add name="AspNetWindowsTokenRoleProvider" applicationName="/" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</providers></roleManager>
</system.web>
View 8 Replies
View Related
Sep 16, 2015
I am using sqljdbc41.jar to connect with MSSQL database, it is working fine on my local machine.Where as on the remote server, same class giving me error
Login failed for user '<domain><windows loginID>'
My connection string is URL...
I am using sqljdbc41.jar and on 64 bit processor , I am using following command which included path for sqljdbc_auth.dll java -Djava.library.path= C: sqljdbc_4.1enuauthx64 TestDao and error is Login failed for user '<domain><windows loginID>' why it is not picking up username passed in connection string. I have 2 machines, one is local and other is remote. on both machine I login using my domain, it is working absolutely fine on local then why the error is coming on remote machine.Both the machines are identical.
View 4 Replies
View Related
Jan 18, 2008
I have been trying to host my website on Go Daddy for about 3 weeks and I have cleared several problems but this one remains. I can get into the ASPNETDB database for doing logins , etc but I cant access my database called "PINEmgt".
To try to understand where the problem is located,I built a very simple application without login controls and put on it one Detailform accessing a single line table "Signin". I continually get the error message I got with my real app :"The connection name 'PINEMgtConnectionString2' was not found in the applications configuration or the connection string is empty. " There is only one connection string in my app -'PINEMgtConnectionString2'. When I run the app locally on my machine it works. After I move everything to Go Daddy, I get the error message and the following dump"
Line 24: </Fields>
Line 25: </aspetailsView>
Line 26: <aspqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStringsINEMgtConnectionString2 %>"
Line 27: InsertCommand="INSERT INTO Signup(first_name, last_name, email, customer_id) VALUES (,,,)"
Line 28: SelectCommand="SELECT * FROM [Signup]"></aspqlDataSource>
This is indeed the code from my single page app.
The dump is:
[InvalidOperationException: The connection name 'PINEMgtConnectionString2' was not found in the applications configuration or the connection string is empty.]
System.Web.Compilation.ConnectionStringsExpressionBuilder.GetConnectionString(String connectionStringName) +3039085
ASP.default_aspx.__BuildControlSqlDataSource1() in d:hostinguck7scoutDefault.aspx:26
ASP.default_aspx.__BuildControlform1() in d:hostinguck7scoutDefault.aspx:10
ASP.default_aspx.__BuildControlTree(default_aspx __ctrl) in d:hostinguck7scoutDefault.aspx:1
ASP.default_aspx.FrameworkInitialize() in d:hostinguck7scoutDefault.aspx.vb:912306
System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +40
System.Web.UI.Page.ProcessRequest() +86
System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) +18
System.Web.UI.Page.ProcessRequest(HttpContext context) +49
ASP.default_aspx.ProcessRequest(HttpContext context) +29
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +303
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
After Googleing, asking Go Daddy for info (which they dont give) , etc for three weeks, I need serious mental help
in the form of a solution of this problem. Your help with the problem or the name of a good mental health professional in eastern N.C. (maybe both) would be appreciated.
View 10 Replies
View Related
May 30, 2008
I have seen another thread with this same problem, but the problem seemed to be a typo. I am getting an error when I try to access the web site ..
The connection name 'USASH-AS0013' was not found in the applications configuration or the connection string is empty.
However, in my web.config file I do have a connection named USASH-AS0013. Here is my web.config file (with my user/pwd hidden). Any help would be greatly appreciated.
<?xml version="1.0"?>
<!--
Note: As an alternative to hand editing this file you can use the
web admin tool to configure settings for your application. Use
the Website->Asp.Net Configuration option in Visual Studio.
A full list of settings and comments can be found in
machine.config.comments usually located in
WindowsMicrosoft.NetFrameworkv2.xConfig
-->
<configuration>
<appSettings/>
<connectionStrings>
<add name="USASH-AS0013" connectionString="Provider=SQLOLEDB;Data Source=USASH-AS0013;User ID=****;Password=*****;Initial Catalog="Smart Factory""
providerName="System.Data.OleDb" />
</connectionStrings>
<system.web>
<!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
Visual Basic options:
Set strict="true" to disallow all data type conversions
where data loss can occur.
Set explicit="true" to force declaration of all variables.
-->
<compilation debug="true" strict="false" explicit="true"/>
<pages theme="MySkin" >
<namespaces>
<clear/>
<add namespace="System"/>
<add namespace="System.Collections"/>
<add namespace="System.Collections.Specialized"/>
<add namespace="System.Configuration"/>
<add namespace="System.Text"/>
<add namespace="System.Text.RegularExpressions"/>
<add namespace="System.Web"/>
<add namespace="System.Web.Caching"/>
<add namespace="System.Web.SessionState"/>
<add namespace="System.Web.Security"/>
<add namespace="System.Web.Profile"/>
<add namespace="System.Web.UI"/>
<add namespace="System.Web.UI.WebControls"/>
<add namespace="System.Web.UI.WebControls.WebParts"/>
<add namespace="System.Web.UI.HtmlControls"/>
</namespaces>
</pages>
<!--
The <authentication> section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user.
-->
<authentication mode="Windows"/>
<!--
The <customErrors> section enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />
</customErrors>
-->
</system.web>
</configuration>
View 3 Replies
View Related
Jul 19, 2007
Hi there,
This is probably a really obvious question but I have been struggling with answering it for about two days now. (I may even be in the wrong forum) I work in a company with an internal network set up. I have been trying to connect to our website via FTP and it has worked ... well it did in the beginning. I think the server that our website is hosted on is a Unix server - this is a guess from reading the FTP transcripts of the various programs I've downloaded and tried out in an attempt to connect to it.
What happened:
I was working on an .ASP page in Dreamweaver, hit save without thinking, realised I wanted to make a few additional changes before uploading it onto the server, cancelled the transaction and voila. I haven't been able to connect to the remote server since.
Depending on the FTP program that I am using, I get a connection error along these lines:
- "Connection to the server was reset" "The server may temporarily be down or unavailable or not accepting connections"
I am a big newbie at this. I have turned off the windows firewall and tried turning on and off passive IP. I can connect from home but not from inside the building which has me think this has to do with a stray setting somewhere. My housemate suggested I try using the "telnet" command from DOS and see can I get any sort of connection from work. If I can't, he said, it's probably a firewall on the internal network itself.
Any other suggestions?
Help would be welcome!
Thanks.
Quizzy
View 1 Replies
View Related
Jul 26, 2006
How would one go about using an ODBC connection with SSIS. I'm trying to ETL some Sybase ASE data, but I get the error when I try it:
"cannot acquire a managed connection from the run-time connection manager"
This wasn't any help:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=169777&SiteID=1
View 1 Replies
View Related
Feb 19, 2015
I have a child package where the ConnectionString property of a Connection Manager is set by a Parent Package Variable Configuration. I set up a script task that brings up a message box with the value of the ConnectionString property right before the dataflow task.
MessageBox.Show(Dts.Connections["CPU_*"].ConnectionString.ToString());When I run the parent package, the message box shows that the connection string is changing with every iteration, but in the dataflow it always draws the data from the same source.
The connection manager is an ADO.Net type, RetainSameConnection is set to False, and I've been researching this for days.
(Update 2/23/2015): To make this stranger, when I look at the diagnostic logs, they tell me that when the new connections are being opened they are using the new connection strings.
View 2 Replies
View Related
Jan 4, 2006
I came across something strange today. I was wondering I was doing something wrong.
View 7 Replies
View Related
Jul 3, 2007
This is the first time I have used SSIS, so please bear with the ignorance.
I have a super simple package that inserts x000's of rows into a temporary table. The data source is a file that the user will upload. I need to be able to tell the package what file to upload. I'm thinking the simplest thing would be to edit the connectionString property of the SourceConnectionFlatFile at runtime. Is this possible? What form should the file path be in (UNC, other)? And, are there any other considerations I should be aware of?
Thanks!
View 1 Replies
View Related
