Connection Error For Replication
Sep 22, 2000All;
After we change servername of the publisher server, I got the error
'Could not connect to Subscriber...'
Please help.
Thanks
Fuan Zhao
ADVERTISEMENT
Merge Replication Error: 'Failure To Connect To SQL Server With Provided Connection
Mar 6, 2007Hi!I´m trying to create a merge replication publication for a SQL MobileApplication .Everything works fine creating the publication and I'm able to dothehttp://xxx.xxx.xxx.xxx/aaaaaaa/sqlcesa30.dll, and it display's the"sql server mobile server agent 3.0".But when I run the application on the PDA and it´s doing thereplication it appears the following error:'Failure to connect to SQL Server with provided connectioninformation . SQL Server does not exist , access is denied becausetheIIS user is not a valid user on the SQL Server , or the password isincorrect' .any idea of which could be the reason...?Thanks in advance!!!
View 1 Replies View RelatedMerge Replication Failing With Named Pipes Provider, Error: 40 - Could Not Open A Connection To SQL Server
Sep 28, 2007
Hi,
I have merge replication configured over VPN and the replication is failing to connect to the subscriber through Named pipes with the error Named Pipes Provider, error: 40 - Could not open a connection to SQL Server ......
Actually , I am having issues with Named pipes connection from publisher to subcriber. I have enabled the protocols and also enabled the remote connections using both tcp/ip and named pipes. I have created the client network alias using named pipes
Also, due to security reasons only few ports have been released on the subscriber. Please provide me some information on the following.
1) Does any port specifically be released for listening on named pipes? i am able to connect using tcpip with out any issues as 1433 has been released.
2) How to configure the replciation to use tcpip and not named pipes (guess by default it will use named pipes)?
Mirror Monitor Error: Server Replication Requires The Actual Server Name To Make A Connection
Oct 17, 2007I'm getting the following error when launching the database mirroring monitor and attempt to connect to my database.
TITLE: Connect to Server
------------------------------
Cannot connect to dborat01.hs.pitt.edu.
------------------------------
ADDITIONAL INFORMATION:
SQL Server replication requires the actual server name to make a connection to the server. Connections through a server alias, IP address, or any other alternate name are not supported. Specify the actual server name, 'xxxxxx'. (Replication.Utilities)
------------------------------
BUTTONS:
OK
------------------------------
Help. When Using Profile GetPropertyValue, I Get The Following Connection Error: An Error Has Occurred While Establishing A Connection To The Server. When Connecting To SQL Server 2005, This Failure May Be Caused By The Fact That Under The Default Sett
May 3, 2008 Hi,I need some help. I am getting this error after I complete the asp.net register control and click on the continue button. It crashed when it tries to get it calls this Profile property((string)(this.GetPropertyValue("Address1")));When I look at the stack, it is coming from my ProfileWrapper class which adds user address, city, etc.. from a class which inherits fromSystem.Web.Profile.ProfileBase. From the stack, it is calling the System.Web.Profile and crashed when it tries to open a connection atSystem.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject). I already migrated all aspnet_user, aspnet_roles, etc.. and don't get any connection errors. It is only when I try to get the profile data. This works on my pc, but throws an error on my lunarpage website.Any help is greatly appreciated.Thanks,AJAn error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:Line 100: public virtual string Address2 {Line 101: get {Line 102: return ((string)(this.GetPropertyValue("Address2")));Line 103: }Line 104: set {Source File: c:windowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
oot 021d50639a6858cApp_Code.54nvluyo.1.cs Line: 102Stack Trace:[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +435 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197 System.Web.Profile.SqlProfileProvider.GetPropertyValuesFromDatabase(String userName, SettingsPropertyValueCollection svc) +782 System.Web.Profile.SqlProfileProvider.GetPropertyValues(SettingsContext sc, SettingsPropertyCollection properties) +428 System.Configuration.SettingsBase.GetPropertiesFromProvider(SettingsProvider provider) +404 System.Configuration.SettingsBase.GetPropertyValueByName(String propertyName) +117 System.Configuration.SettingsBase.get_Item(String propertyName) +89 System.Web.Profile.ProfileBase.GetInternal(String propertyName) +36 System.Web.Profile.ProfileBase.get_Item(String propertyName) +68 System.Web.Profile.ProfileBase.GetPropertyValue(String propertyName) +4 ProfileCommon.get_Address2() in c:windowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
oot 021d50639a6858cApp_Code.54nvluyo.1.cs:102 ProfileWrapper..ctor() in d:inetpubvhostsjavcentral.comhttpdocsApp_CodeProfileWrapper.cs:242 ProfileDataSource.GetData() in d:inetpubvhostsjavcentral.comhttpdocsApp_CodeProfileDataSource.cs:17[TargetInvocationException: Exception has been thrown by the target of an invocation.] System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +0 System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +72 System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) +308 System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) +29 System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance) +480 System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1960 System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17 System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149 System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70 System.Web.UI.WebControls.FormView.DataBind() +4 System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82 System.Web.UI.WebControls.FormView.EnsureDataBound() +163 System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69 System.Web.UI.Control.EnsureChildControls() +87 System.Web.UI.Control.FindControl(String id, Int32 pathOffset) +21 System.Web.UI.Control.FindControl(String id) +9 CustomerDetailsEdit.OnPreRender(EventArgs e) in d:inetpubvhostsjavcentral.comhttpdocsUserControlsCustomerDetailsEdit.ascx.cs:60 System.Web.UI.Control.PreRenderRecursiveInternal() +86 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2041
Error: The AcquireConnection Method Call To The Connection Manager Excel Connection Manager Failed With Error Code 0xC0202009.
Dec 27, 2007Hi,
I am working on SQL Server 2005 (x64) with Windows Server 2003 (x64) operating system. I am having a major issue in SSIS. Here is the detailed explanation of the issue :
I have an EXCEL file in 2003 / 2007 version. It contains some data. I want to import the data using SSIS into SQL Server 2005 (x64) database table. I have taken "EXCEL FILE SOURCE" and "SQL Server DESTINATION". It was failed on importing data. Surprisingly it works fine in SQL Server 2005 (x32). Can you please explain why it is NOT woking on (x64) ?
Here is the error code i am getting:
[Excel Source [1]] Error: The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.
Appreciate your time and patience !!
Thanks
SQL 2005 Error: Replication-Replication Distribution Subsystem: Agent (null) Failed.
Jun 15, 2007I'm getting this, after upgrading from 2000 to 2005.Replication-Replication Distribution Subsystem: agent (null) failed.The subscription to publication '(null)' has expired or does notexist.The only suggestions I've seen are to dump all subscriptions. Sincewe have several dozen publications to several servers, is there adecent way to script it all out, if that's the only suggestion?Thanks in advance.
View 3 Replies View RelatedIdentity Range Managed By Replication Is Full And Must Be Updated By A Replication Agent. Error Message Makes NO SENSE.
Mar 6, 2007Hello,I'm getting the following error message when I try add a row using aStored Procedure."The identity range managed by replication is full and must be updatedby a replication agent".I read up on the subject and have tried the following solutionsaccording to MSDN without any luck.(http://support.Microsoft.com/kb/304706 )sp_adjustpublisheridentityrange (http://msdn2.microsoft.com/en-us/library/aa239401(SQL.80).aspx ) has no effectFor Testing:I've reloaded everything from scratch, created the pulications from byrunning the sql scripts generated,created replication snapshots andstarted the agents.I've checked the current Identity values in the Agent Table:DBCC CHECKIDENT ('Agent', NORESEED)Checking identity information: current identity value '18606', currentcolumn value '18606'.I check the Table to make sure there will be no conflicts with theprimary key:SELECT AgentID FROM Agent ORDER BY AgentID DESC18603 is the largest AgentID in the table.Using the Table Article Properties in the Publications PropertiesDialog, I can see values of:Range Size at Publisher: 100,000Range Size at Subscribers: 100New range @ percentage: 80In my mind this means that the Publisher will assign a new range whenthe Current Indentity value goes over 80,000?The Identity range for this table cannot be exhausted! I'm not surewhat to try next.Please! any insight will be of great help!Regards,Bm
View 1 Replies View RelatedThe AcquireConnection Method Call To The Connection Manager &&<Connection Name&&> Failed With Error Code 0xC020200
Feb 14, 2008Hi All,
I am getting the following error if I am using the package "Transaction Option=Required" while running through Sql Job:
The AcquireConnection method call to the connection manager "<connection name>" failed with error code 0xC0202009.
while I running the SSIS package on BI environment, I am getting the following error:
[Connection manager "<connection name>"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.".
I know the alternative solution is to make the "Transaction Option=Supported", but in my case I have run the whole flow in a single transaction. I came to know that this has been fixed in the service pack1(ref. to http://support.microsoft.com/kb/914375). FYI.. some time it was running successful.
I have taken all the necessary step to run the SSIS package in a distributed transaction(like the steps for MSDTC) and also created the package flow in a sequence.
I was going through the link - http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=160340&SiteID=1 but all those didn't solve my problem.
If anyone can help me it will be great. or it is a bug in SSIS?
Thanks.
Jena
Rounding Error: Between Flat File Connection Manager Source && OLE DB Connection Destination (SQL Server 2005)
Jun 22, 2006I have a Rounding error: Between flat file connection manager Source & OLE DB Connection Destination (SQL Server 2005) in my Dataflow.
File looks like this lets call column names Col A,B,C,D
70410000 RD1 1223631.92 196042.42
70329000 ICD 11025.84 3353.88
71167300 COL 104270.59 24676.96
flat file connection manager settings: first row Column names then Advanced tab Col A float , Col B float , Col C string ,Col D float ,
OLE DB Connection Destination (SQL Server 2005)
CREATE TABLE [dbo].[PT_CUST_ABR](
[PARTY_NO] [float] NULL,
[PARTY_NAME] [varchar](75) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[TELECOMABR] [float] NULL,
[GENIABR] [float] NULL,
Problem: ColA (Source) Rounding error to PARTY_NO (Destination)
I have a field of text of in a flat file that the flat file connection manager Source picks up correctly €œ70000893€?
However when it gets the OLE DB Connection Destination the data has changed to 70000896. That€™s before its even Written to the database.
The only clue that something is wrong in the middle is the great Data viewer shows the number as 7.000009E+07
Other clues looking at the data it appears there is a rounding error on only the number that dont end in 00
ColA (Source) PARTY_NO (Destination)
71167300 71167296
70329000 70329000
70410000 70410000
Any ideas people?
Thanks in advance
Dave
Connection Attempt Failed With Error: '10061(No Connection Could Be Made Because The Target Machine Actively Refused It.)'.
Sep 7, 2007I am working in a distributed environment, I verified msgs have been successfully send from server1 db1 to server2 db2, but I still get the following error msg from the sender server through SQL profile:
Connection attempt failed with error: '10061(No connection could be made because the target machine actively refused it.)'.
Does anyone experienced the samething?
Thanks!
SSPI Handshake Failed With Error Code 0x8009030c While Establishing A Connection With Integrated Security; The Connection Has Be
Mar 7, 2006Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine. It alwayws works for me but after some minutes the other developer cant work in the application
He got this error
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 192.168.1.140]
and When I see the log event after that error, it comes with another error.
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 192.168.1.140]
He has IIS5 and me too.
I created a user on the domain called ASPSYS with password, then in the IIS on anonymous authentication I put that user with that password, and it works, on both machines.
and in the connection string I have.
<add key="sqlconn" value="Data Source=ESTACION15;Initial Catalog=GescomDefinitiva;Integrated Security=SSPI; Trusted_Connection=true"/>
I go to the profiler, and I see that when he browses a page, the database is accesed with user ASPSYS, but when I browse a page, the database is accesed with user SElevalencia.
Thats strange.
The only way that the other developer can work again on the project is to restart the whole machine. He has windows xp profession, I have windows 2000.
If you want me to send logs please tellme
Help Me ...Server Connection For Replication
Oct 16, 2006Hi,..Please help me..
We have two server on pulbilc ip A , B in other country, and there replication will working fine. But i want to replicate data from one online server(A) to my local office(in my country) server(C). means from public ip to private(A->C). then some one told me that you have to put both server on public for replication. after the i put my local server(c) on public ip. but now i am facing the problem that i am able to connect C to A(means my office server to other country server) but not able to connect A to C(means other country server to my office server). when i am connecting from A to C then error shows is "defaut sqlserver server does not allow remote connection". I have change all the sql settings..and also done required changes in firewall but not successed. my operating system 2003 and database sql2005........ please help me................ASAP
thanks and regards
Vipin yadav
Replication Between Two Servers Which Do Not Have Connection At All
May 8, 2006Hello, Heros of The Programming World!
How it is possible to perform "replication" between two databases using technological means of MS SQL Server 2005 if two servers do not have a connection at all. The only thing is possible - is transfer of data for the replication on a CD.
What is the best way to do it if central database has a hundreds of such "subscribers"?
Bidirectionnal Connection Fro Merge Replication??
Jul 21, 2004Hello, I only need to know if I need to have a bidirectionnal connection between the subscriber and the publisher for merge replication or if the connection ca be openned only from the publisher to the subscriber if i use the push subscription option.
Thanks in advance
SQL Server Replication Connection Problem
Apr 19, 2007Hi
I have a problem when trying to setup replication between two SQL servers on different networks.
My publication server is SQL Server 2005 Standard Edition. My subscription server is SQL server 2005 Express Edition
I have setup the publication no problem but am now trying to create my subscriber. However, when trying to connect to the server, I receive the following error:
SQL Server replication requires the actual server name to make a connection to the server. Connections through a server alias, IP address, or any other alternate name are not supported. Specify the actual server name, 'W2M-RDC-01'. (Microsoft.SqlServer.
However, because the servers are not on the same network, I cannot use the server name.
Why does it not allow you to connect to an IP?
Is there a way to create an alias? I have read that you can but am unsure how to do this. Do I need to change the hosts file? If so, where can I find this and what exactly do I need to change?
Kind Regards
Dan Rostron
Is Replication Without Network Connection But File-based Possible?
May 9, 2006Hello,
I've been looking around in several SQL-Forums and in SQL Books Online but haven't found clear suggestions how to tackle my problem:
Our company has to fill a database with documentation for our contractor. Our subcontractors have to supply information from their branch/craft into this database, too.
Replication (without determining a type at this time) would do fine for data-exchange between us and our subcontractors.
But for working in different companies the networks are not connected
and in some companies/departments connection to the Internet is prohibited at all.
This would result in data-exchange based on files - which wont be a problem as data needs to be updated/exchanged only once a week and is usually done at meetings using DVD-Rs.
scenario in short:
- two-way exchange of data between SQL servers being not connected
- update needed once a week
- our server: SQL Server 2005 Standard (preferred)
- servers of our subcontractors: SQL Server Express 2005 (preferred)
That's the point where I dont know how to proceed:
Is two-way replication based on files possible at all?
I read about Snapshots, but to my understanding this replaces the "whole database" without caring about changes made to it and that's why it wont work for two-way exchange.
I would appreciate your hints how to solve this problem in general or whether I should look out for other solutions - MS Access might work with restrictions - but I would prefer SQL Server.
Thanks for reading until here and in advance for your answers.
Regards,
Michael__H
SQL <->Access Replication Error (Source: MS.Jet.4.0 (Agent); Error Number: -1507)
May 22, 2002I get this error in my Agent after starten to synchronise.
I see the access mdb been created and then deleted and renamed to
name_old.mdb
Do you have some help?
Richard
Transactional Replication Over Satellite Connection. Set Parameters For High Latency?
Jul 31, 2007I have 2 servers; 1 in the head office and the 2nd at a remote location connected over a satellite. The satellite connection has typical latency and bandwidth. 2 mb down and 128kb up. Latency is average of 700ms.
Both servers have plenty of processing power and RAM and are very underutilized.
I have 1 push publication at the publisher at the remote location. The publication has 1 article. The table that is contained in the article only grows; ie inserts are the only statements applied, no updates or deletes. The table grows by 5 inserts every second(approximate). the table has 5 columns. none of the columns are blobs etc. An ID field, 1 datetime, 2 integers and 1 float column.
I have the agents set for continuous with a 2 second polling interval.
I am aware of the following command parameters for the agents but not sure which way to go to maximize the throughput of the data.
MaxCmdsInTran
SubscriptionStreams
ReadBatchSize
CommitBatchSize
PollingInterval
The subscriber table also has an insert after trigger to update another small table with the current value. Under normal network conditions, the trigger works great. Over the sat connection with high latency, the smaller target table seems to get a lock placed on it. I can only guess that the lock is from the inserts and perhaps a large number of inserts per transaction?
Under normal network conditions, the latency between publisher - distribution - subsciber is about 4 seconds.
What would be good command parameter settings for the agents to compensate for the latency?
Thanks,
Kevin
The AcquireConnection Method Call To The Connection Manager Excel Connection Manager Failed With Error Code 0xC0202009
Mar 24, 2008I am using SSIS 2005 on Windows 2003 server. Using Excel Source to dump the data for staging database.
I am getting following error while I execute it through BI studio's execute button.
Please help.
- Sachin
The AcquireConnection Method Call To The Connection Manager Excel Connection Manager Failed With Error Code 0xC0202009
Mar 11, 2008I have deployed my packages into Sql Server and I am using Configuration File. As my Data Source is Excel, I have changed the connection string during deployment with Server Path. But I am getting the following errors. Actually the File Exist in Path. May I know What is cause of the issue? Do I need to give any permission to execute the package.
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
component "Excel Source Service Contract Upload" (1) failed validation and returned error code 0xC020801C.
One or more component failed validation.
There were errors during task validation.
DTS_E_OLEDBERROR, Error Code: 0x80004005 Source: "MS JET DB Engine" Description : Path is not valid
The Connection Is Not Found. This Error Is Thrown By Connections Collection When The Specific Connection Element Is Not Found
May 1, 2007I've got a package which reads a text file into a table and updates another. I set up configurations so that I could import it into the SSIS store on both my dev and live servers. Now, I'm getting this error. I tried removing the configs and am still getting it.
I've been through each step and everything looks okay. Does anyone have any idea (a) what's wrong, (b) how to localise the error or (c) get any additional information? Or do I just have to recreate the package from scratch?
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at PartnerLinkFlatFileImporter: The connection "" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Error at PartnerLinkFlatFileImporter [Log provider "SSIS log provider for SQL Server"]: The connection manager "" is not found. A component failed to find the connection manager in the Connections collection.
(Microsoft.DataTransformationServices.VsIntegration)
------------------------------
BUTTONS:
OK
------------------------------
SSIS Execution Error: FlatFile Connection Problem - FileName &&<fileName&&> Specified In The Connection Was Not Valid.
Apr 19, 2008
Hi Champs,
Scenario Configuration : VB.net 2005 Code, WebService for Executing SSIS on Server, SSIS deployed on the Database Server
Problem Description : We are developing windows applicaiton in which we call webservice which was deployed on the same server where SSIS packages are deployed.
Now from Code we are passing FilePath name in variable and execute the Package. But the SSis result says that
The file name "\computernamefol1fol2fol3fol4abc.txt" specified in the connection was not valid.
More Information:
1. Full Permission are given on this network folder.
2. Package executes successfully from SSIS development solution (BIS solution)
3. Deployed packed executes successfully from the Database Server.
4. From Development pc packege executes successfully.
5. Other packages deployed on the same server executed suucessfully with same configuration and scenario.
Only this package is not executing.
-- the only differece with this package with other is -
using ".txt" extension in Flat file connection and using VB Script task
Can any one suggest the appropirate solution for this problem...
Thanks
Tarang Pandya
Irregular Error In SQL 2000-Named Pipes Provider, Error: 40, Could Not Establish Connection
Apr 10, 2007I have a web application developed in VS.NET 2005 [using C# as code behind]; and it uses SQL Server 2000 Enterprise edition as backend.
The application runs fine, though it gives an error on IRREGULAR intervals on SQL data requests.
Error Details:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
My problem is this:
1) Why does it show an error of SQL 2005, while I use SQL 2000. SQL 2005 is not even installed on the server, though VS.NET 2005 is installed.
2) The error comes only at irregular intervals. Users are able to login properly otherwise.
3) Application starts working again if we do either of the following: (a) Restart IIS (b) Restart application pool (c) Restart server.
4) Named pipes and TCP/IP are added to the "Network Configuration" of the SQL server 2000.
5) Error does not come on any specific page; or any specific code; or at any specific time.
6) We do not have any background service or any other activity happening on the server; and the server hosts only this application, within a single virtual root.
Any thoughts on why is this happening, and how to resolve this?
Error: 26 - Error Locating Server/Instance Specified - (My Hosting Company Says It's In My Connection String) NOT!
May 24, 2007Hi All...
I am trying to move my site (incomplete) for testing and I am finding that the Db connection process to be
the most difficult, well back to my problem. I can't seem to get past this error and am frustrated with overall
connectivity problems. Please help!!!
===================================================================================
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +820
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42
System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83
System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160
System.Web.UI.WebControls.Login.AttemptLogin() +105
System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35
System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210
Now you all must admit that, if your somewhat new to this databasing, It's a ***.
The source for my application is Visual Web Designer 2005 Express
It is an ASP.Net driven site with membership roles and all the good stuff.
the latest theory is that I need to change the provider config in the web.config file from AspNetSqlProvider
to something else. Most of my complications and frustrations come from GoDaddy and no access to the
shared server (understandibly).
I hope I gave enough info for help and not too much..
Dave
ADODB.Connection Error '800a0e7a' Provider Cannot Be Found. It May Not Be Properly Installed. Error
Feb 27, 2008.im trying to run a script. and i get the errror at the topic. what can i do?
my pointed code is:
Code Snippet
Sur.open "PROVIDER=MICROSOFT.JET.OLEDB.4.0;DATA SOURCE=" & strMDBPath
im running on windows vista 64x bus.
Service Broker Application Is Getting Error + Connection Attempt Failed With Error: '10060
Aug 17, 2007
hi ,
i am creating a service broker application between two different instance.when i am initiating a dialog from the source my message remain in the sys.transmission_queue.but its transmission_status column is empty.
i attached the profiler with both source and target by including all the service broker event.
in my source profiler i am getting the error like -- Connection attempt failed with error: '10061(No connection could be made because the target machine actively refused it.)'. with event Broker:connection
and in the target profiler error is --This message could not be delivered because the security context could not be retrieved. with event Broker:Message Undelivarible.
i have checked my port also using telnet with remotely and localy both working fine. i am using port no. 4001
and i have mentioned the port no. in the address of the route.
bt still getiing the error.
please help!!!!!!!!!!!
The Underlying Connection Was Closed: An Unexpected Error Occurred On A Receive. Endpoint Error
Mar 28, 2007what can cause the above error when connecting to an endpoint via a c# app? the app, and sql are both on my machine ( im just doing this for test purposes and to learn something new.)
View 1 Replies View RelatedError Occurred While Executing Batch / Internal Connection Fatal Error
Sep 24, 2015Got this error running a query with ssms2014
on SqlServer2014
but db has Compatibiliy level 100 (sql2008)
no sql error code in message and no error found in eventviewr (sqlserver log, windows log, application log ecc)when i run that query i got this message in "messages" tab, and in results tab i got a strange result, indeed the value returned doesn't exists in table.
ex table1.field1 possible values= 2,3
it returns 1113344
we got that error thru jdbc too...that query use a lot of joins, unfortunatley i can't post it here. today got this error, so i make a copy of 1 of involved table into another db in the same instance, re run the query on the original db, and it works well.
Large Reports - Error: The Underlying Connection Was Closed: An Unexpected Error Occurred On A Receive.
Mar 13, 2008First off I understand that it is a horrible idea to run extremely large/long running reports, but sometimes it ends up being the best possible solution due to external forces.
I've got a 25,000 page report that we recently converted from crystal reports to SSRS. The SSRS server is a 64bit 2003 server with 32 gigs of ram running SSRS 2005. When running the report through the report manager web application, it renders in the browser/viewer after about 12 minutes. Exporting to pdf through the browser/viewer in the report manager takes an additional 55 minutes. It does work and it produces a whopping 1.03gb pdf.
Unfortunately, I've run into a problem when trying to do this from a console application using the SSRS client API. After about 30-35 minutes I get an exception on the client with the following error:
Exception Message: The underlying connection was closed: An unexpected error occurred on a receive.
InnerException = Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
Here is the api call:
Code Snippet
byte[] m_data = reportingService.Render(this.ReportPath, this.ExportFormat, null,
deviceInfo, selectedParameters, null, null, out encoding, out m_mimeType,
out usedParameters, out warnings, out streamIds);
Here are some things I've tried so far:
set the HttpRuntime ExecutionTimeout value to 3 hours on the report server
disabled http keep alives on the report server
increased the script timeout on the report server
set the report to never time out on the server
set the report timeout to several hours on the client call
Disabled antivirus on the client side, and verified there was no antivirus running on the reporting server.
Tried using default credentials in the ReportingService object as opposed to supplying credentailsAny ideas would be appreciated. I understand the best solution is to split the report up into smaller reports, which is the backup option, but being able to keep it as one report is the goal.
SSIS Error: The Connection Does Not Support Enlisting In Distributed Transaction. Error Code: 0x8000FFFF
Feb 29, 2008
Hi all,
can anyone tell me if an oleDb connection (provider is Jet 4.0 to Access database) can be enlisted in a Distributed Transaction?
The goal is to copy data from SqlServer to Access within a transaction.
Pier
Test Connection Failed Because Of Error Initializing Provider. The HTTP Server Returned The Following Error : Not Found
May 26, 2008
Hi All,
I am using windows 2003 server and i have installed SSAS 2005 and configured http request for AS 2005 with this below url : http://www.microsoft.com/technet/prodtechnol/sql/2005/httpasws.mspx. I had tried all the possiblities given in this url. But i am getting like "Test connection failed because of error initializing provider. The HTTP Server returned the following error : Not found" when i create udl file. Moreover i have installed MSOLAP 3.0 and OLAP 9.0 provider and MSXML 6.0 Parser.
Can you anyone please provide solution for this?
Thanks in advance,
Anand Rajagopal
An Error Has Occurred While Establishing A Connection To The Server. Error: 40
Dec 26, 2005hi i got the following error message while connectiong to my sql server 2005
NB :i am connecting from the same pc where sq server is installed.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)
Any idea?
Tarek