Connection Error To Remote SQL Instance, Over VPN
Aug 21, 2006
I am trying to connect to an instance of SQL Express through a vpn, simply using the SQL Management Studio, providing the server ip address x.x.x.xMSSQLSERVER, and using SQL authentication login. I receive the following message:
Cannot connect to <server>, etc., etc.
error 25: - Connection string is not valid
Does anyone understand this? I am trying to connect through the SQL Server Management interface, not with a client program that would utilize a connection string. Is there something which prevents Management Studio from working over a vpn?
To connect, I am using SQL authentication, and have verified the login and password locally on the target pc. The SQL browser service is running on the target pc, and I can telnet to the port which it is monitoring, through the same vpn connection. Remote connections are enabled for TCP/IP in the Surface Area configuration on the target pc.
Any help appreciated.
View 6 Replies
ADVERTISEMENT
Feb 20, 2007
I am trying to set up a ODBC connection to a remote database using the ODBC data source administrator. I am getting an error message complaining of an invalid instance(). The database I am trying to connect to does have a default instance and a named instance. Do I need to specify the instance name somewhere in the connection settings? I tried specifying the server name as <Remote computer IP Address>/<Instance Name> but this didn't work. Any ideas?
View 4 Replies
View Related
Jan 17, 2008
I am attempting something that I have done many times before; however, in this instance it continues to fail.
I am trying to connect Management Studio to an instance of SQL Server 2005 Express over a VPN. The Management Studio connect dialog always fails with Error 26.
I have:
Enabled the instance for remote connections €“ both TCP/IP and Named Pipes
Ensured that the instance is enabled for TCP/IP on the VPN address (10.2.1.1) and on port 1433
Ensured that the instance is running
Ensured that SQL Browser is running
Ensured that ports 1433 (TCP) and 1434 (UDP) are open on the firewall for inbound traffic
Rebooted the server following this configuration to ensure that the instance services are refreshed
Tried to connect from three separate clients (albeit on the same remote network)
Disabled the firewall to ensure no further complications (as a last resort)
I have this exact same setup functioning on a separate server.
There is an additional backstory to this problem; however, I will not complicate the scenario with it now. If you feel you can help then I can elaborate further on the server€™s history.
Thanks
James
View 3 Replies
View Related
May 24, 2007
Hi All...
I am trying to move my site (incomplete) for testing and I am finding that the Db connection process to be
the most difficult, well back to my problem. I can't seem to get past this error and am frustrated with overall
connectivity problems. Please help!!!
===================================================================================
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +820
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42
System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83
System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160
System.Web.UI.WebControls.Login.AttemptLogin() +105
System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35
System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210
Now you all must admit that, if your somewhat new to this databasing, It's a ***.
The source for my application is Visual Web Designer 2005 Express
It is an ASP.Net driven site with membership roles and all the good stuff.
the latest theory is that I need to change the provider config in the web.config file from AspNetSqlProvider
to something else. Most of my complications and frustrations come from GoDaddy and no access to the
shared server (understandibly).
I hope I gave enough info for help and not too much..
Dave
View 4 Replies
View Related
Mar 3, 2008
Hello everybody,I was configuring a SqlDataSource control using SQL Authentication mode.I first added a database file (testdb.mdf) through Solution Explorer-Add New Items. Then through Database Explorer I created a table named "info"Then while configuring the SqlDataSource control I used the SQL Authentication mode and attached the "testdb.mdf" database file.Test Connection showed success. But when I hit the Ok button of the wizard it displayed the following error message:Failed to generate a user instance of SQL Server. Only an integrated connection can generate a user instance.While configuring the SqlDataSource control I clicked "New Connection". Under Data Source section I tried both Microsoft SQL Server and Microsoft SQL Server Database File. And in both the cases I attached a databese file(testdb.mdf). Plz enlighten me on this.Thanks and Regards,Sankar.
View 1 Replies
View Related
Jun 24, 2006
System.Data.SqlClient.SqlException: An error
has occurred while establishing a connection to the server. When
connecting to SQL Server 2005, this failure may be caused by the fact
that under the default settings SQL Server does not allow remote
connections. (provider: SQL Network Interfaces, error: 26 - Error
Locating Server/Instance Specified)
I have enabled the remote connection in the surface area configuration, and i've also enabled my sql browser.
This error raised when i'm testing my just installed WSRFdotnet using
NUnit testing, however, when I tested my remote connection using SQL
Server Management Studio Express CTP, it worked. btw, I'm using SQL
Express
any solutions?
thx
View 3 Replies
View Related
Sep 18, 2006
hi communitythe error something like this " error 40, could not open connection to sql server" . For community information i try to transfer my membership table from sql express 2005 to sql server 2000. my application something like email where user need to create their account first before they can log in. I use membership default in mssql express . and my datacenter do not support sql express ( like all we know most of them). I already surf some tips from the internet how we can transfer our membership from sql exppress to sql server but i get this error . i already try to change the setting from sql server surface area configuration but it still not working.. i hope someone ( the jedi ) can help me .. ThankMay The Force Be With U
View 1 Replies
View Related
Oct 6, 2007
hello allmy web page occur this errorAn error has
occurred while establishing a connection to the server. When
connecting to SQL Server 2005, this failure may be caused by the fact
that under the default settings SQL Server does not allow remote
connections. (provider: Named Pipes Provider, error: 40 - Could not
open a connection to SQL Server) what is this, my site does not contain the remote connection i m using sql server 7.0so please help me Ashwani Kumar
View 1 Replies
View Related
Dec 3, 2007
when connecting to database it give me the error like this
Message "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)" string
can you have any idea to solve it..
View 2 Replies
View Related
Jun 2, 2007
Hi.Its really become a nightmare solving remote SQL Server connection. I thought it was going to be easy. Anyway im using win xp sp2 and sql 2k5 express as testing environment. I followed trouble shooting
tips:
http://blogs.msdn.com/sql_protocols/archive/2006/09/30/SQL-Server-2005-Remote-Connectivity-Issue-TroubleShooting.aspx
and secured all requirements to met one by one.
I created a test script (ASP) running on the same box where the SQL Server was installed and its running perfectly (eg http://127.0.0.1/sql.asp OR http://localip/sql.asp) either using one of the following connection string
cn.Open "Driver={SQL Server};" & _
"Server=live-static -ip;" & _
"Address=local-ip,1433;" & _
"Network=DBMSSOCN;" & _
"Database=xxx;" & _
"Uid=xx;" & _
"Pwd=xxx;"
OR
cn.Open "Provider=sqloledb;Network Library=DBMSSOCN;" & _
"Data Source=local-ip,1433;" & _
"Initial Catalog=testdb;" & _
"User ID=xx;Password=xx;"
now i upload the page to our domain host and try to access but its sending an error:
################ ERROR MESSAGE
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]SQL Server does not exist or access denied.
/sql.asp, line 6
########################################
sql browser is also running, and remote connections allowed, port exemption and firewall is turn off but im receiving the same error.
where im getting wrong.
View 5 Replies
View Related
Dec 4, 2007
Through the SMS tool, the following error is being received:
===================================
Cannot connect to MyServerMyInstance.
===================================
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (.Net SqlClient Data Provider)
Note: obviously the server/instance of MyServerMyInstance is fake :).
The setup is the developers receiving this error are connecting to the domain remotely through a VPN connection (so they are on a different, non trusted domain). Also, the IP address our server is on uses an internal range that the remote developers already have in use for something else on their network. So we gave them a bogus IP to use where we then perform a 1-to-1 NAT translation on our end to the correct IP. This all appears to work but the developers still receive this error.
We do have remote connections enabled for both TCP/IP and NetBIOS and everyone at our office can connect just fine. With this in mind, what could be some other issues that can cause this? The only other thing I can think of is somewhere (there are 2 firewalls involved - ours and theirs) is that the UDP packets are not being received by the client.
View 12 Replies
View Related
Mar 30, 2008
I am getting this error
"An error has occurred while establishing a connection to the server.when connecting to SQL Server 2005,this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.(provider:Named Pipes Provider,error:40-Could not open a connection to SQL Server)(Microsoft SQL Server,Error:2)"
in SQL EXPRESS 2005"
1.Just changing the service config settings that is TCP/IP to enable will it work?i changed i run my application but it didn't work they have written the code to the server(connection string to their server- if it was to common how to write the code ?) & is there any other changes ?
2.I have developed a VB.NET EXE file -In that application(inside the code) i am using run time connection string queries to connect to the database & created run time tables.?
Suppose if i want to install the application to all clients/users how to Configure that application - self configuration/self installer to the installing machine SQL SERVER.
How can i do this ?
3.Is there any way i can write config file for sql server along with exe application code ? How can i do this ?
Pls answer with details/screenshots or diagramatical (if possible)
pls reply asap
Dotnetnewbiw
View 1 Replies
View Related
Nov 19, 2007
I am converting over from MSDE to SQL Express. My front end program is unable to connect to the database. To troubleshoot, from the remote computer I tried connecting with the management program and I get the Error 26 unable to connect.
Here is what I have done: I made sure that the SQL Server configuration has been changed to allow network connections (both TCP and named pipes). I have disable windows firewall on both machines. I confirmed that I can connect from the remote machined to the server by network browsing. Both machines are running XP Proff. There is no other security software running on either machine.
More Info. when attempting to log on I am using the server authntication, I use "sa" as the user id plus my password.
Goal. The front end of database program connects to the server remotely using a program called Hamachi over the internet. This works without a problem on MSDE. But for now I am simply try to connect using the managment program which lets you browse for other serves. When I do this it shows the remote computer, but not the name of the computer but not the SQL server which I type in like the following: "INTELsql1"
What I have not Done: I have not changed any permissions or added any users to the server, since this does not seem necessary. As stated the user of remote machine can connect to the server and change files.
Would appreciate any suggestions or tips. Thanks.
View 1 Replies
View Related
Jun 2, 2007
Its been almost 2 months i start running a test script page to check if i made the remote connection until now its getting worst.
I did follow every bit of the instruction and pre-evaluation in fact the script is working locally with this string:
cn.Open "Driver={SQL Server};" & _
"Server=global-static-ip;" & _
"Address=local ip,1433;" & _
"Network=DBMSSOCN;" & _
"Database=testdb;" & _
"Uid=xx;" & _
"Pwd=xx;"
i also review the ff post for client and server trouble shooting tips:
http://blogs.msdn.com/sql_protocols/archive/2006/09/30/SQL-Server-2005-Remote-Connectivity-Issue-TroubleShooting.aspx
surface configuration, sql browser, firewall exemption...
and nothing seems change when i access the uploaded script.
is there anything i am missing?
by the way the script is uploaded by company.
View 3 Replies
View Related
Nov 19, 2007
Overview. I am converting over from MSDE to SQL Express. My front end program is unable to connect to the database. To troubleshoot, from the remote computer I tried connecting with the management program and I get the Error 26 unable to connect.
(The connection string worked previously (yesterday) when using MSDE as the server. When I installed SQL Express I named it the same instance as the server name under MSDE. I also use server authtication on both with same user name and password. As stated below I cannot connect using the managment console.)
Here is what I have done: I made sure that the SQL Server configuration has been changed to allow network connections (both TCP and named pipes). I have disable windows firewall on both machines. I confirmed that I can connect from the remote machined to the server by network browsing. Both machines are running XP Proff. There is no other security software running on either machine.
More Info. when attempting to log on I am using the server authntication, I use "sa" as the user id plus my password.
Goal. The front end of database program connects to the server remotely using a program called Hamachi over the internet. This works without a problem on MSDE. But for now I am simply try to connect using the managment program which lets you browse for other serves. When I do this it shows the remote computer, but not the name of the computer but not the SQL server which I type in like the following: "INTELsql1"
What I have not Done: I have not changed any permissions or added any users to the server, since this does not seem necessary. As stated the user of remote machine can connect to the server and change files.
Would appreciate any suggestions or tips. Thanks.
I HAVE READ THE POST FROM MAY 13, 2007 AND TAKEN ALL STEPS SUGGESTED EXCEPT MAKING SURE THE BROWSERS SERVICE IS RUNNING ON SERVER WHICH I WILL DO NOW.
View 2 Replies
View Related
Sep 13, 2007
Hey all.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
View 2 Replies
View Related
Mar 12, 2007
I have a visual basic 2005 application where I am storing some data in a Sequel Server Database. It's my first attempt using SQL Server. It was developed on my machine and the database is on my local hard drive.
It was put onto an industrial PC and shipped last December (the vb app is an HMI).
Our service guy is installing the machine and asked for some changes to the VB screens. I ran my app (on my computer) and it crashed when I selected the screen where I use the db.
So I decided to look at the database using Visual Basic and I get the following error:
Microsoft Visual Basic 2005 Express Edition
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
I then tried to create a new database via Visual Basic and get the same error. My boss has it installed on his machine. Same error there. These are both machines that had no problem back in December!
I also have a industrial PC on my desk to test my app and it STILL WORKS there. That one though is not connected to the internet and hasn't gotten any updates or changes or whatever since I last had it on in December. I don't know if it was a windows update or a network change? But as I said, I'm not connecting remotely - SQL Server and the db are on our local machines.
Interesting enough, if I go to the control panel | Administrative Tools | Services, SQL Server (SQLEXPRESS) is set to automatic and is NOT started. I attempt to start it and get an error
Services
Windows could not start the SQL Server (SQLEXPRESS) on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 3417.
I am lost.
Thanks in advance for any help!
View 10 Replies
View Related
Jun 18, 2007
On my computer (WinXP En Prof SP2) I have installed SQL Express 2005 with instance name "SQL2005". Mixed Mode.
I allowed Remote connection to this DB server, enabling TCP/IP protocol on port 1433.
Also SQL Browser is set to autostart.
My firewall is off.
When I try to connect to this server through the CMDline, I use:
sqlcmd -S testpcsql2005 -U sa -P test
I only get: "Sqlcmd: Error: Microsoft SQL Native Client: Client unable to establish connection due to prelogin failure"
If I use:
sqlcmd -S testpcsql2005 -U sa -P asdfghjkl (or any password)
the result will be the same.
If I try to connect to the server through the Management Studio, I just get:
"A connection was succesfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error:0 - An existing connection was forcibly closed by the remote host.)(Microsoft SQL Server, Error: 10054)"
or
"A connection was succesfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error:0 - An established connection was aborted byt the software in your machine.)(Microsoft SQL Server, Error: 10053)"
Next I have installed the new DB on new computer (WinXP En Prof SP2) with the same options (using unattended installation in CMD line) and on this computer it works. It means, that I can establish remote connections to that server with any problems.
I have search on internet to solve this problem bud a I didn't find the solution. I found, that this error relates to winsock layer - WSAECONNABORTED(10053) and WSAECONNRESET(10054) error codes.
But I still don't know, how to solve this and remotely connect to my DB Server...
Thanks for your answers.
Edit 1:
I have tried to uninstall MS Net Framework 2.0, Microsoft SQL Native Client, Microsoft Support Files.
When I try localy connect - it doesn't work, of course.
When I try remotely connect:
"sqlcmd -L" shows, that exists "testpcsql2005"
"sqlcmd -S testpcsql2005 -U sa -P asdfghjkl" (or any password) generate the same Error as before - nothing changed
Is it problem of MS SQL Server or MS Windows? How to solve this?
View 6 Replies
View Related
Jan 11, 2008
Help! My web-application worked fine last week. I have made some enhancements and it still works fine when I test in locally in VS 2005 and from IIS when I allow unauthenticated users (by commenting out "<deny users="?"/>" in my web.config. However, with not allowing unauthenticated users, I get redirected to a login application (which also worked last week), where I supply one of several user names and passwords and it is supposed to redirect me back to my default.aspx page. Only, now it is taking the authentication parameters from the login screen but is not redirecting me back to my app's page and instead is putting up this Error 26 that states SQL Server 2005 does not allow remote connections.
The included stack trace has no information about what server it seems to be trying to connect with, but the strangest thing about it is I/we are not using SQL Server 2005 yet (still a future upgrade not too far off). The application database, the authentication aspnetdb database, and the Session aspstate database are all on the same SQL Server 2000 managed server. And, these were all working last week (and are all accessible). I have not changed any connection strings and as I said, it works fine without the loging in part both locally and from IIS. It is only when using the Login in application, which is working with other apps and the developer insists the problem has to in my application (after all the first line of the error message states: Server Error in '/deployment1' Application, which is my app!)
I am lost in finding the culprit, can someone please give me some ideas?
View 2 Replies
View Related
Feb 15, 2008
Hi,
I have a problem when updating tables in a SQL Server 2000. I am able to make a select form tables but I can't insert data. I got this error :
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
SQLExpress database file auto-creation error:
View 3 Replies
View Related
Jun 3, 2008
plz help me...
when establishing a connection to the server. when connecting to server 2005, this failure may be caused by the fact that under the default setting SQL Server does not allow remote connections.(provider: Named pipes provider, error:40 - could not open a connection to sqlserver)
View 2 Replies
View Related
Jul 22, 2005
I am getting this error in Enterprise Manager:
TCP Provider: An existing connection was forcibly closed by the remote host.
But, my web app can still connect just fine to the db, so it's still in
the same place with the same login/password. And my registration
in EM was working just fine (for years) until yesterday I got this
error. I've tried deleting the registration and re-creating it
but the same thing. What could have gone wrong to cause this to
happen?
Thanks for any pointers, I have no idea where to start looking on this one, the host says they haven't changed anything...
View 1 Replies
View Related
Jan 2, 2007
OS: Win 2003 Service Pack I on 2 boxes
SQL: SQL Server 2005 Clustered System
Situation: I have created a maintenance plan to backup my transaction log every hour. This runs fine for some time and then later that day it stops working. This could happen at any anytime, and I end up having to manually kick it off again. I read the SQL error logs and this is what it points to:
[298] SQLServer Error: 2, Named Pipes Provider: Could not open a connection to SQL Server [2]. [SQLSTATE 08001]
[165] ODBC Error: 0, Login timeout expired [SQLSTATE HYT00]
[298] SQLServer Error: 2, An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. [SQLSTATE 08001]
[382] Logon to server 'JAXNVSQL1CLS' failed (ConnAttemptCachableOp)
[177] Job MaintenancePlan Insight Transaction Logs has been requested to run by Schedule 10 (Insight Transaction Log Backup)
[165] ODBC Error: 0, Login timeout expired [SQLSTATE HYT00]
I have already used SAC to confirm that remote connections is enabled using TCP/IP and Named Pipes. I have used the server configuration tool as well to check this. I have used the Studio Management and checked on the remote connections as well.
I know these protocols are enabled and working because I have used the Studio Management to check on the activity connections type and seen both are working. Plus the fact this maintenance plan does work, it just so happens something causes it later to fail. When this does fail, I log onto the server but can not login using the Studio Management , I get [298] errors. I can login using the Studio Management on my laptop remotely but can not manually kick off the maintenance plan. I end up having to log on to the server and restart the MSSQL Server service and manually kick off my plans. (By the way these services do not show shutting down in the Windows event viewer). After restarting the MSSQL Server service and manually executing the maintenance plan everything is fine until the next time it hits a glitch.
I do have SQL Browser up and running, all of the MSSQL services running, I need some help as to what may be causing this problem!!!!!!!!! HELP!!!!! I am losing my mind!!!!
View 5 Replies
View Related
Apr 29, 2006
We are getting a problem when the below error Log
Server: SQL Server 2005 and SP1.
Then, All the Web Servers will drop all connections and stop the network service. Later, the network service will start up automatically but all the before service is dropped.
We would like to know the error coming from?
Error Log
================
TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host
Event Type: Warning
Event Source: ASP.NET 2.0.50727.0
Event Category: Web Event
Event ID: 1309
Date: 4/29/2006
Time: 10:48:47 AM
User: N/A
Computer: 88DBWEB0
Description:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 4/29/2006 10:48:47 AM
Event time (UTC): 4/29/2006 2:48:47 AM
Event ID: 77910e6688484582bb1c29808feef883
Event sequence: 128
Event occurrence: 13
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/24978983/Root/ph-3-127907437121075328
Trust level: Full
Application Virtual Path: /ph
Application Path: D:DB88ph
Machine name: 88DBWEB0
Process information:
Process ID: 1568
Process name: w3wp.exe
Account name: NT AUTHORITYNETWORK SERVICE
Exception information:
Exception type: SqlException
Exception message: A transport-level error has occurred when sending the request to the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.)
Request information:
Request URL: http://88db.jobsdb.com/ph/Views/MediaUpload.aspx?PostID=50202&Type=I&panelid=postimagediv
Request path: /ph/Views/MediaUpload.aspx
User host address: 192.168.10.10
User: 50077
Is authenticated: True
Authentication Type: Forms
Thread account name: NT AUTHORITYNETWORK SERVICE
Thread information:
Thread ID: 15
Thread account name: NT AUTHORITYNETWORK SERVICE
Is impersonating: False
Stack trace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.WriteSni()
at System.Data.SqlClient.TdsParserStateObject.ExecuteFlush()
at System.Data.SqlClient.TdsParser.TdsExecuteRPC(_SqlRPC[] rpcArray, Int32 timeout, Boolean inSchema, SqlNotificationRequest notificationRequest, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader()
at System.Web.SessionState.SqlSessionStateStore.DoGet(HttpContext context, String id, Boolean getExclusive, Boolean& locked, TimeSpan& lockAge, Object& lockId, SessionStateActions& actionFlags)
Custom event details:
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
View 10 Replies
View Related
Nov 14, 2005
If you connect to a server and open a query in SQL Managment studio (2005) and looses connection and then regain the connection, when you try to run the query it gives me a "TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host." This happens against both 2005 and 2000 servers. If I re-run the query it works. However, this happens in our VB.NET app as well for clients with Wireless connections. So, something has changed in Framework 2.0 regarding this, does anyone know how to tell the client to not throw this error and just try connecting the server instead which will work?
View 105 Replies
View Related
Apr 10, 2007
Hi
i connect to remote Integration Service. i configure server for remote connection( on component services and DCOM config , ... ) .and now i can connect to Integration Service remotely and correctly.
but when i expand Stored Package and then click to expand MSDB this error will hapen:
login failed for user ... .(microsoft sql native client )
please help me
thanks in advance
View 1 Replies
View Related
Jan 3, 2006
What does this error mean? I get this in the transmission_status column of sys.transmission_queue
An error occurred while receiving data: '10053(An established connection was aborted by the software in your host machine.)'.
Also, does the number in this message correspond to error 10053 in sys.messages?
Thanks
View 3 Replies
View Related
Nov 15, 2007
The box I am trying to connect to is running two instances of SQL Server.
There is a SQL Server 2005 instance which is the default. There is a SQL Server 2000 instance which is named 'SQLSERVER'.
I can connect to the SQL Server 2000 instance no problem:<add key="ConnectionString" value="server=MYPCSQLSERVER;database=mydatabase;user id=****;password=****" />
However, I am having trouble connecting to the Default SQL Server 2005 instance. I have tried:
<add key="ConnectionString" value="server=MYPC;database=mydatabase;user id=****;password=****" />
but it doesn't work. I have tried explicitly setting SQL Server 2005 to use port 1434 (as SQL Server 2000 is running on port 1433), and then used:
<add key="ConnectionString" value="server=MYPC,1434;database=mydatabase;user id=****;password=****" />
but this doesn't work either.
Am I mssing something here? Any help much appreciated
Thanks...
View 2 Replies
View Related
Nov 21, 2007
my web app was working fine but as soon as i added in a page and few store procedures and 2 tables it just pop up with that error message.
Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.
i did go into the folder C:Documents and SettingsdnguyenLocal SettingsApplication DataMicrosoftMicrosoft SQL Server Datasqlexpress and delete the directory but this didnt help much. I still get the same error message. please help
View 2 Replies
View Related
Nov 13, 2007
Hello,
I have just reinstalled windows xp pro with service pack 2 and framework 2.0.
I am using SQL Express and visual studion 2005.
I am trying to run my website and i keep getting this error message, i followed few instructions but i still failed to make it work. could someone who faced similar issues guide me,
thanks
MM
Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.
Source Error:
Line 112: Public Overridable Property Theme() As String
Line 113: Get
Line 114: Return CType(Me.GetPropertyValue("Theme"),String)
Line 115: End Get
Line 116: Set
Source File: C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Fileswroxunitedeecd65d2e1a6a798App_Code.ws-dzmjl.6.vb Line: 114
Stack Trace:
[SqlException (0x80131904): Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.]
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +437
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.Profile.SqlProfileProvider.GetPropertyValuesFromDatabase(String userName, SettingsPropertyValueCollection svc) +766
System.Web.Profile.SqlProfileProvider.GetPropertyValues(SettingsContext sc, SettingsPropertyCollection properties) +428
System.Configuration.SettingsBase.GetPropertiesFromProvider(SettingsProvider provider) +410
System.Configuration.SettingsBase.GetPropertyValueByName(String propertyName) +117
System.Configuration.SettingsBase.get_Item(String propertyName) +89
System.Web.Profile.ProfileBase.GetInternal(String propertyName) +36
System.Web.Profile.ProfileBase.get_Item(String propertyName) +68
System.Web.Profile.ProfileBase.GetPropertyValue(String propertyName) +4
ProfileCommon.get_Theme() in C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Fileswroxunitedeecd65d2e1a6a798App_Code.ws-dzmjl.6.vb:114
Wrox.Web.GlobalEvents.ThemeModule.app_PreRequestHandlerExecute(Object Sender, EventArgs E) in C:WebsiteWroxUnitedApp_CodeThemeModule.vb:30
System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +92
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
View 1 Replies
View Related
Oct 11, 2007
HiI'm going insane.I have a club starter kit on my local server which is working fine.I have migrated the database to my remote host and seems to have transfered ok.For a brief period I was able to connect to the database remotely, but now I cannot I get the following, even though SQL Server Surface Area Config is set to accept remote connections.An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)This is my connection string;<add name="ClubSiteDB" connectionString="Data Source=xx.xxx.xx.xx,xxxx; Network Library=DBMSSOCN; Initial Catalog=tets; User ID=sqladminbob;Password=sqlbob4398;" providerName="System.Data.SqlClient="/>I hav also tried to use aspnet_regsql.exe to add the remote provider but I get the same message. Thanks
View 3 Replies
View Related
Jun 15, 2006
Post moderated by XIII, please leave out the "irrrggent" in the subject line:
i'm using a SQL Server 2000.now want i want is to make one of the machine on my local networkMachine one: i've installed the SQL Server 2000 with these settings1) Use Local System2) MixMode (Use Windows Authentication and SQL Server Authentication)USER ID = saPassword = saFrom Machine tow which has the program: the connection string is:<<< Me.SQLConnection_Search.ConnectionString = "packet size=4096;integrated security=SSPI; Persist Security Info=true; data source= "the name of the instance on Machine ONE"; user id=sa; password=sa; initial catalog=DBNEW; Server="Machine One Name">>>>>>>when i connect --> "connect faild to MachineOneGuest"when i changed the SERVER to SERVER = "Machine One NameUser Account of the windows"this message appear : "SQL Server does not exist or access is denied"So what can i do.??????
View 1 Replies
View Related
Apr 7, 2008
When running the project in debug mode or non-debug mode, I get the following error from MS Visual Studio:
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at Package [Connection manager "SYBASE_CONNECTION"]: The connection manager failed to defect from the transaction.
(Microsoft.DataTransformationServices.VsIntegration)
------------------------------
BUTTONS:
OK
------------------------------
Any ideas???
View 8 Replies
View Related
