Hi.
I created two instances of SQL Server Dev Edition on the same machine.
The two instances acted as the sender / receiver.
However, when the message is transmitted from "Sender" to "Receiver", the following errors are
displayed in "SQL Profiler".
「Connection handshake failed. There is no compatible authentication protocol. State 21.�
How should be dealt with with this?
My best regards.
piknik
Full message:
Connection handshake failed. An OS call failed: (8009030c) 0x8009030c(The logon attempt failed). State 66
Under these conditions, setting trustworthy on on the sending and receiving databases will solve this issue
1) Communicating between multiple instances
2) Using Kerberos security (NT Authentication, i.e. not certificates)
Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine. It alwayws works for me but after some minutes the other developer cant work in the application
He got this error
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 192.168.1.140]
and When I see the log event after that error, it comes with another error.
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 192.168.1.140]
He has IIS5 and me too.
I created a user on the domain called ASPSYS with password, then in the IIS on anonymous authentication I put that user with that password, and it works, on both machines.
and in the connection string I have.
<add key="sqlconn" value="Data Source=ESTACION15;Initial Catalog=GescomDefinitiva;Integrated Security=SSPI; Trusted_Connection=true"/>
I go to the profiler, and I see that when he browses a page, the database is accesed with user ASPSYS, but when I browse a page, the database is accesed with user SElevalencia.
Thats strange.
The only way that the other developer can work again on the project is to restart the whole machine. He has windows xp profession, I have windows 2000.
If you want me to send logs please tellme
Hi there!
Often discussed, but not really solved in my opinion - the connection between the partners and the witness causes problems.
My case: Three Servers in the same domain, three endpoints on 5022 with windows negotiation, all endpoints can be reached by telnet from each server. Mirrorring works. So far so good.
But one of these partners is not able to connect to the witness. The witness' error log is full with that:
"2006-06-01 13:45:20.32 Logon Database Mirroring login attempt failed with error: 'Connection handshake failed. An OS call failed: (8009030c) 0x8009030c(Der Anmeldeversuch ist fehlgeschlagen.). State 67.'. [CLIENT: 130.143.205.54]"
My Endpoints are created like
CREATE ENDPOINT [EASYRIS_Mirroring]
AUTHORIZATION [code1dephbrsaa1-sys108]
STATE=STARTED
AS TCP (LISTENER_PORT = 5022, LISTENER_IP = ALL)
FOR DATA_MIRRORING (ROLE = PARTNER, AUTHENTICATION = WINDOWS NEGOTIATE
, ENCRYPTION = SUPPORTED ALGORITHM RC4);
What catches my eyes is that
GRANT CONNECT ON ENDPOINT::EASYRIS_Mirroring TO [code1dephbrsaa1-sys108];
doesn't cause these user to appear in the result set of
SELECT EP.name, SP.STATE,
CONVERT(nvarchar(38), suser_name(SP.grantor_principal_id))
AS GRANTOR,
SP.TYPE AS PERMISSION,
CONVERT(nvarchar(46),suser_name(SP.grantee_principal_id))
AS GRANTEE
FROM sys.server_permissions SP , sys.endpoints EP
WHERE SP.major_id = EP.endpoint_id
ORDER BY Permission,grantor, grantee;
By the way, these mentioned user is sysadmin and grantor.
Has anyone an idea?
Torsten
When I configure SSB in two machine to send message, I get a error message in target machine SQLProfiler:
View 13 Replies View RelatedHello,
I am unable to send a message to a target service on a different SQL Server instance. Using the SQL Profiler, I get the following error from the target machine:
Broker::Connection: Connection handshake failed: An OS call failed: (80090326) 0x80090326(The message received was unexpected or badly formatted.). State 106.
On the initiator side, the transmission_status shows the following error:
An error occurred while receiving data: '64(The specified network name is no longer available.)'.
Any ideas on why the target thinks the message is "unexpected or badly formatted"? Btw, I am specifying the default message type and contract for the services.
Thanks.
I configured a database mirroring on SQL server 2008 R2 on test environment. However It was not working, after some time. I deleted the mirroring configuration and also deleted database on both primary and mirror instance.
few days later I notices, On Primary, Continuous error events logged with message "database mirroring attempt by user 'domainservice account' failed with error 'connection handshake failed, 'domainservice account' does not have permission on the endpoint state 84.
I want to get rid of this message.
I keep getting these alerts but the client's IP listed in the message doesn't seem to be having a problem. I'm not sure if it is retrying and succeeds the second or third try. I commonly get 2 of these messages each time it happens. I thought is may be when the user connects to the server in Management Studio but when I got the message today the user wasn't trying to connect to this server. The server the use was connected to in SSMS is linked to this server but if the link was causing the error it looks like it would return the IP of the server instead of the users IP. The link is done using a SQL login account. Anyway, this is not a big problem since know body except me even knows it is happening but I'd like to figure it out.
SQL Server Alert System: 'Fatal Error in Current Process' occurred on
DESCRIPTION: SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed.
Hi,
I am using SQL Server 2005. I got the following error in event viewer. Tried to search info from web failed. Does anyone have idea? Thanks a lot :)
[Log]=Application
[EventID]=17806
[Source]=MSSQLSERVER
[Time]=02-07-2007 23:35:56
[EventMsg]=SSPI handshake failed with error code 0x80090308 while establishing a connection with integrated security; the connection has been closed. [CLIENT: 202.40.9.176]
My developers are getting a "Failed to retrieve data for this request error" in SQL Server Management Studio. When I look in the SQL Server logs there are two errors logged:
Source Logon
Message
Error: 17806, Severity: 20, State: 2.
Source Logon
Message
SSPI handshake failed with error code 0x80090311 while establishing a connection with integrated security; the connection has been closed. [CLIENT: IP Address]
I can€™t seem to find any information about these errors. Any ideas?
I have a SQl2k8 R2 up and running on a win2k8 R2, I have a domain controller as well with AD 2k8 R2. It works fine but from time to time I receive a dozen of successive alerts like th folowing
DATE/TIME:Â Â Â Â Â Â
11/22/2010 12:19:57 PM
Â
DESCRIPTION:Â SSPI handshake failed with error code 0x80090311, state 14 while establishing a connection with integrated security; the connection has been closed. Reason: AcceptSecurityContext failed. The Windows error code indicates the cause of failure.Â
Â
COMMENT:Â Â Â Â Â Â
(None)
JOB RUN:Â Â Â Â Â Â Â Â Â Â Â
(None)
I understand from some threads here that it is an issue related to contacting the AD. In event viewer it is not clear what is casuing this. I have WSS databases, Biztalk server databases.....and some other user databases. NO home made applications contact sql server.
Â
What is the best route to follow to see who is not being able sometimes and why contacting the AD. I read the thread at URL.... but it is related to express 2005 and it does not apply to my case.
Hi,
I am using SQL Server 2005. I got the following error in event viewer. I tried to search on web the solution but failed. Does anyone have idea on that? Many thanks :)
Log]=Application
[EventID]=17806
[Source]=MSSQLSERVER
[Time]=02-07-2007 23:35:56
[EventMsg]=SSPI
handshake failed with error code 0x80090308 while establishing a
connection with integrated security; the connection has been closed.
[CLIENT: 202.40.9.176]
Im trying to login to sql from an external client but I keep getting these messages
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (4)
Event ID: 17806
Date: 29.11.2007
Time: 15:49:23
User: N/A
Computer: xx
Description:
SSPI handshake failed with error code 0x80090302 while establishing a connection with integrated security; the connection has been closed. [CLIENT: xxxx]
Event Type: Failure Audit
Event Source: MSSQLSERVER
Event Category: (4)
Event ID: 18452
Date: 29.11.2007
Time: 15:49:23
User: N/A
Computer: xx
Description:
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: xxxx]
This only happens when the SQL server has these policies applied:
Policy
Setting
Network security: Do not store LAN Manager hash value on next password change
Enabled
Network security: LAN Manager authentication level
Send LM & NTLM - use NTLMv2 session security if negotiated
Network security: LDAP client signing requirements
Negotiate signing
Network security: Minimum session security for NTLM SSP based (including secure RPC) clients
Enabled
Require message integrity
Enabled
Require message confidentiality
Enabled
Require NTLMv2 session security
Enabled
Require 128-bit encryption
Disabled
Network security: Minimum session security for NTLM SSP based (including secure RPC) servers
Enabled
Require message integrity
Enabled
Require message confidentiality
Enabled
Require NTLMv2 session security
Enabled
Require 128-bit encryption
Disabled
I do not have the choice to switch to mixed mode authentication on the sql and these policy settings are a security policy requirement for me.
regards
duh123
Hi,
I am having such a problem. I have SQL Express installed on the windows 2003 server and originally I installed instance1 of SQL Server 2005. When I installed Instance1, I remember having problems with remotely connecting to that instance1, but somehow I fixed it. Now I installed instance2 and I started having remote connection issues again with that instance2. I am able to connect to instance1 but not instance2. I checked settings for both instances and they look identical.
I turned firewall off for now. I checked TCP settings using surface area configuration (allowing both local and remote connections). I turned off VIA protocol. I specified TCP properties to use dynamic port for that instance2.
In the sql native client configuration I have the following order#: 1. Shared memory, 2. tcp, 3. np, 4. VIA(Disabled). TCP is configured to use 1433.
I have no clue about what is going on. Sometimes I am able to connect remotely and sometimes I get the following error:
"A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: TCP Provider, error: 0 - The specified network name is no longer available.) (.Net SqlClient Data Provider)."
When I connect locally - everything connects fine. File sharing is also checked, it works etc...
Thanks for help!!!
GK
I just noticed that I was able to connect from different computer on the different network.
I get the following error when trying to view my page.
Can someone please help me with this error. What does it mean and what is the solution to it? Here is the complete error message. -
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)
Sir i am trying to connect sql from my LAN to my networked computers but whenever i tried to register it through Enterprise manager i get following "SQL Server registration failed because of the conection failure displayed below.Do you wish to Register anyway? Login failed for user 'SW17/Guest'
where SW17/ is my another computer name...
i have checked tcp and named pipes
and confirm username for sql authentication too
please help me as i being late submit my project
I got this message from sql
"Server was unable to process request. ---> A connection was successfully established with the server, but then an error occurred during the pre-login handshake. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.) "
Does anyone know what happen?
Thanks
I have a package that uses a for loop to iterate through an unknown amount of excel files and pull their data into a table. However, there will be cases when the file is corrupted or has some sort of problem so that either the transformation will fail or the excel data source will fail with an oledb connection error.
Could anyone suggest a clean way to trap these errors? Specifically, the "Cannot Aquire Connection from Connection Manager", which is the excel connection.
Thanks,
John T
I am running the Sept CTP. I have created a SSIS package that pulls data from a text file and inserts into a database. When I run the package on the DB server it runs fine. I have moved the package the the web server (we are attempting to kick off the package from a web site) and we get connections errors. We are running the package using dtexec from the command line.
View 7 Replies View RelatedI created a single step plan that does integrity checks. It fails with the error below. I created a new connection using our clusters virtual sql name.
Executed as user: ACCTCOMsqlagent. ...n 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 1:10:06 PM Error: 2008-02-15 13:10:49.02 Code: 0xC00291EC Source: {0CF32F3D-A8D1-492A-9C0F-AD4E0FC67D14} Execute SQL Task Description: Failed to acquire connection "Local server connection". Connection may not be configured correctly or you may not have the right permissions on this connection. End Error Warning: 2008-02-15 13:10:49.02 Code: 0x80019002 Source: OnPreExecute Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. End Warning Error: 2008-02-15 13:11:31.26 Code: 0xC0024104 Source: Check Database Integrity Ta... The package execution fa... The step failed.
The agent and db are running under domain accounts and the job is owned by sa.
Thanks for your help.
Hi,
i am getting this exception i.e."
The TCP/IP connection to the host has failed. java.net.ConnectException: Connection timed out: connect" whenever i try to connect to the remote DB which is present at a different system.
Hi All,
I am getting the following error if I am using the package "Transaction Option=Required" while running through Sql Job:
The AcquireConnection method call to the connection manager "<connection name>" failed with error code 0xC0202009.
while I running the SSIS package on BI environment, I am getting the following error:
[Connection manager "<connection name>"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.".
I know the alternative solution is to make the "Transaction Option=Supported", but in my case I have run the whole flow in a single transaction. I came to know that this has been fixed in the service pack1(ref. to http://support.microsoft.com/kb/914375). FYI.. some time it was running successful.
I have taken all the necessary step to run the SSIS package in a distributed transaction(like the steps for MSDTC) and also created the package flow in a sequence.
I was going through the link - http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=160340&SiteID=1 but all those didn't solve my problem.
If anyone can help me it will be great. or it is a bug in SSIS?
Thanks.
Jena
I am working in a distributed environment, I verified msgs have been successfully send from server1 db1 to server2 db2, but I still get the following error msg from the sender server through SQL profile:
Connection attempt failed with error: '10061(No connection could be made because the target machine actively refused it.)'.
Does anyone experienced the samething?
Thanks!
hi all,
i got the error, when i run my package after deploy into the server machine;
i can able to run that package in my local machine, if i deploy it to the server or some remote machine, its not running, and rises error messages, that says cant accquire connection from the connection manager;
the problem might be with the login name and password; i could not see any password in any of my config file, or connection manager while running the package.
how to resolve this problem?? please help me!
We have a SQL 2000 Active/Passive cluster running on Windows 2000. On one node, everything logs in fine (second node is powered off). I can use local authentication fine in OSQL (-E) and even see my connection in SQLEM current activity as [DomainUser] for the NT account which I am logged in as. Then I bring the second node online and initiate a failover. SQL Server starts but Cluster Admin cannot connect and starts throwing this Anonymous Logon error. I open a command prompt and try the same OSQL (-E) local login and sure enough it is also giving the Anonymous Logon connection user. I do not understand why the failover to a second node is causing the Trusted Connection Local authentication to switch to Anonymous instead of the [DomainUser] which I am using. Any help is appreciated. John.
View 1 Replies View RelatedI am using SSIS 2005 on Windows 2003 server. Using Excel Source to dump the data for staging database.
I am getting following error while I execute it through BI studio's execute button.
Please help.
- Sachin
I have deployed my packages into Sql Server and I am using Configuration File. As my Data Source is Excel, I have changed the connection string during deployment with Server Path. But I am getting the following errors. Actually the File Exist in Path. May I know What is cause of the issue? Do I need to give any permission to execute the package.
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
component "Excel Source Service Contract Upload" (1) failed validation and returned error code 0xC020801C.
One or more component failed validation.
There were errors during task validation.
DTS_E_OLEDBERROR, Error Code: 0x80004005 Source: "MS JET DB Engine" Description : Path is not valid
Occasionally I'm seeing the following error when tranlog or full backup maintenance plan is executing.
Failed-1073573396) Failed to acquire connection "Local server connection". Connection may not be configured correctly or you may not have the right permissions on this connection.
What is strange is that it goes away without any action from myself. We have a tranlog backup that is scheduled every hour. I had this error happen once in the middle of the night. It looks like the job was running fine because almost all the backups are there. I've searched and not found a resolution to this error. I checked the event log and don't see any issues and even tried rebuilding the maintenance plans.
I get the following error approx once per week(not at the same day/time) when logging into our site:-
"a connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error : 0 - SSL Provider: )"
It's on SQL 2000 & Windows 2000.
It's a test server with very little traffic. At the moment an IISRESET allows access to the site again until 5 - 7 days later when the problem appears again.
Any ideas ?
Hi,
I am working on SQL Server 2005 (x64) with Windows Server 2003 (x64) operating system. I am having a major issue in SSIS. Here is the detailed explanation of the issue :
I have an EXCEL file in 2003 / 2007 version. It contains some data. I want to import the data using SSIS into SQL Server 2005 (x64) database table. I have taken "EXCEL FILE SOURCE" and "SQL Server DESTINATION". It was failed on importing data. Surprisingly it works fine in SQL Server 2005 (x32). Can you please explain why it is NOT woking on (x64) ?
Here is the error code i am getting:
[Excel Source [1]] Error: The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.
Appreciate your time and patience !!
Thanks
Hi everyone, I need help.
I am using Windows Server 2003, VS.NET 2003 and SQL 2000&sp3 on same PC. I was try to run the samples from Framework DSK v1.0 and v1.1, both failed on SQL connection. No matter sa or ASPNET userID, can't make it works.
I can run these samples on Windows 2000, VS.NET 2002 and SQL 2000&sp3 without problem, also runs on Windows XP, VS.NET 2002, SQL 2000&sp3 with WC service on my notebook.
Any particular section I should scope it for troubleshooting?
Thanks for any suggestion on this issue.
I have a sql server database and access as front end. Everybody except one user works on this database is fine. When this user open the database. It showed error message"
connection failed: SQLState:'s1000'
SQL Server Error: 0
[Microsoft][ODBC SQL Server Driver]Cannot generate SSPI context.
Actually he worked fine before. Just today, it didn't work.
Can you help me how to solve this problem?
Many thanks.
Hi Guys,
I encountered an error while opening my third SQL Connection in Enterprise Manager
---------------------------
Microsoft SQL Server Login
---------------------------
Connection failed:
SQLState: '01000'
SQL Server Error: 232
[Microsoft][ODBC SQL Server Driver][Shared Memory]ConnectionWrite (WrapperWrite()).
Connection failed:
SQLState: '08S01'
SQL Server Error: 11
[Microsoft][ODBC SQL Server Driver][Shared Memory]General network error. Check your network documentation.
---------------------------
OK
---------------------------
I am using the following
SQL Server 2000 Enterprise Edition (SP4)
Windows 2000 Professional (SP4)
first two connections are with Query Analyzer, the third attempt is when opening a table inside Enterprise Manager
anyone experienced this?