Connection Manager Reuse For Oracle And SQL Databases
May 2, 2008
I'm trying to implement a configurable way of executing a group of SQL statements using either an Oracle or SQL database as the source for the data.
I'm currently building a connection string with a Script Task and then assigning it to a package variable so that it can be used by a connection manager but this only works with a SQL OLEDB connection.
I'm holding all the connection details in a database table, hence the need for the scripting but would it be possible to extend the task to reuse a single connection manager by changing it's properties?
View 7 Replies
ADVERTISEMENT
Apr 14, 2006
Hi, I dont know if I should post this question here, or on oracle forums, but here goes ...
I made a simple package that performs 2 Excecute SQL Tasks, one task does a select query on a SQL Server DB Table, the other task does a select query on an Oracle DB Table.
The package runs fine in BIDS when debugging, but when I deployed the package to a file system and added it to an sql server agent Job, it all went wrong ...
I tried the ms oledb dataprovider (ole db) for oracle but also the oracleclient data provider (ado.net) but the package always fails.
The error messages in the logfile are these:
event
OnError
computer
ComputerName
operator
NT AUTHORITYSYSTEM
source
Execute SQL Task PLSQL
sourceid
{B29C4FC9-3345-4657-8680-F770B8C2E136}
executionid
{7312A7EC-2555-4268-BB29-38659507BADD}
starttime
14/04/2006 16:40
endtime
14/04/2006 16:40
datacode
-1073573396
databytes
0x
message
Failed to acquire connection "aaa.bbb.oracleClient". Connection may not be configured correctly or you may not have the right permissions on this connection.
the OnError logrow for the package itself says almost the same.
Now my question is: What do I need to configure to get it all working? I think I need to configure the oracle db no? What should I configure? ...
View 6 Replies
View Related
Jan 23, 2007
Hi All,
Is there a way in SSIS to change the database connection to sqlserver or oracle or db2 without choosing the connection manager in the source.
For e.g. I ran a package which is reading data from sqlserver and later i want to connect to oracle to read the data but without changing the connection manager in the source.
Basically, i want to find out from you gurus is about a way to switch between databases without changing the connection managers. OR the only way is to make different sets of packages for oracle / db2 and sqlserver sources ?
Thanks,
Vipul
View 2 Replies
View Related
Jan 17, 2008
Hi,
I want to import data from Oracle database programmatically using ODBC connection manager. I was able to import data by creating an ODBC DSN and then using it BIDS with ADO.NET connection using ODBC data provider for Oracle. Now I want to do the same programmatically. How should I create a connection manager? I tried using code below
ConnectionManager cmOracle = this.package.Connections.Add("ADO.NET: ODBC");
cmOracle.Name = "OracleSourceConnection";
cmOracle.ConnectionString = "Dsn=MyDSN;uid=MyID;";
But I get an error when acquiring connection
ErrorCode=-1071611874
The connection manager "__" is an incorrect type. The type required is "__". The type available to the component is "__".
Which one of the connection managers given by Microsoft here should be used?
http://msdn2.microsoft.com/en-us/library/ms136093.aspx
Has anyone come across similar scenario?
Thanks
View 3 Replies
View Related
Mar 27, 2008
All,
I am using the Oracle Provider for OLE DB (32 bit) to connect to an Oracle 10g database. I enter all the connection parameters and test the data source and I it says that the connection is successful. I then open the connection manager for the data source and see that the password has disappeared.
After reading entries on this forum, I tried to setting the package permission to UserKey, Password and others. Still no luck. Then I created an XML configuration file and set the connection string and password there as well. Still no luck.
Below is the message I am getting:
Error: 0xC0202009 at Package1, Connection manager "******": SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Error: 0xC00291EC at Execute SQL Task, Execute SQL Task: Failed to acquire connection "****". Connection may not be configured correctly or you may not have the right permissions on this connection.
Here is my XML config file:
- <DTSConfiguration>
- <DTSConfigurationHeading>
<DTSConfigurationFileInfo GeneratedBy="******" GeneratedFromPackageName="Package1" GeneratedFromPackageID="{63C53905-74EC-4AD5-9523-3A4B4BEF4CB5}" GeneratedDate="3/27/2008 8:39:47 AM" />
</DTSConfigurationHeading>
- <Configuration ConfiguredType="Property" Path="Package.Connections[*********].Properties[ConnectionString]" ValueType="String">
<ConfiguredValue>Data Source=*****;User ID=*****;Password=******;Provider=OraOLEDB.Oracle.1;Persist Security Info=True;</ConfiguredValue>
</Configuration>
- <Configuration ConfiguredType="Property" Path="Package.Connections[*****].Properties[Description]" ValueType="String">
<ConfiguredValue />
</Configuration>
- <Configuration ConfiguredType="Property" Path="Package.Connections[*******].Properties[InitialCatalog]" ValueType="String">
<ConfiguredValue />
</Configuration>
- <Configuration ConfiguredType="Property" Path="Package.Connections[*******].Properties[Name]" ValueType="String">
<ConfiguredValue>******</ConfiguredValue>
</Configuration>
- <Configuration ConfiguredType="Property" Path="Package.Connections[*******].Properties[Password]" ValueType="String">
<ConfiguredValue>******</ConfiguredValue>
</Configuration>
- <Configuration ConfiguredType="Property" Path="Package.Connections[******].Properties[ProtectionLevel]" ValueType="Int32">
<ConfiguredValue>1</ConfiguredValue>
</Configuration>
- <Configuration ConfiguredType="Property" Path="Package.Connections[********].Properties[RetainSameConnection]" ValueType="Boolean">
<ConfiguredValue>0</ConfiguredValue>
</Configuration>
- <Configuration ConfiguredType="Property" Path="Package.Connections[*******].Properties[ServerName]" ValueType="String">
<ConfiguredValue>******</ConfiguredValue>
</Configuration>
- <Configuration ConfiguredType="Property" Path="Package.Connections[********].Properties[UserName]" ValueType="String">
<ConfiguredValue>*******</ConfiguredValue>
</Configuration>
</DTSConfiguration>
I am a local administrator on the box as well. Any help would be greatly appreciated.
View 10 Replies
View Related
Jan 2, 2007
I have an issue when using Report Manager for viewing reports that use a certain Oracle data source. When viewing the reports in Report Designer the reports display without problems. But when trying to display the reports with Report Manager, after deploying the reports to the Report Server, I now get the following error message:
blablabla....ORA-12705: invalid or unknown NLS parameter value specified
For testing purposes I am running Report Designer, Report Server and Report Manager locally on a PC with Windows XP. I am using Reporting Services 2005, IIS 6, Visual Studio 2005, an Oracle 9.x client and an Oracle 9.x (not 100% sure) database that is hosted on a remote server.
Earlier I got an error message that stated "ORA-12154: TNS: could not resolve the connect identifier specified". Access rights to some Oracle folders for the Network service account did the trick here but then I got the "NLS parameter" error message. What I have tried to do is removing the NLS_LANG register variable and also modified the value of the variable so that it matches the value of the NLS_LANG variable on the server that hosts the Oracle database, but none of them have worked. Any ideas?
Maybe this is an issue that is more appropriate in an Oracle forum but what the heck..the problem could reside in Reporting Services..
Thanks, Stefan
View 1 Replies
View Related
Mar 24, 2008
I am using SSIS 2005 on Windows 2003 server. Using Excel Source to dump the data for staging database.
I am getting following error while I execute it through BI studio's execute button.
Please help.
- Sachin
View 2 Replies
View Related
Mar 11, 2008
I have deployed my packages into Sql Server and I am using Configuration File. As my Data Source is Excel, I have changed the connection string during deployment with Server Path. But I am getting the following errors. Actually the File Exist in Path. May I know What is cause of the issue? Do I need to give any permission to execute the package.
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
component "Excel Source Service Contract Upload" (1) failed validation and returned error code 0xC020801C.
One or more component failed validation.
There were errors during task validation.
DTS_E_OLEDBERROR, Error Code: 0x80004005 Source: "MS JET DB Engine" Description : Path is not valid
View 27 Replies
View Related
Jan 25, 2008
I've added a typed DataSet and dragged a table across from the server explorer. When I click configure on the table adapter, then click previous back to the "Choose Your Data Connection" dialog. The only option is the new connection that was just created when I added the sql server to the server explorer. Is there anyway to reuse my existing web.config connection string? My goal is to have a single connection string in my web.config.
Thanks.
-David
View 3 Replies
View Related
Apr 13, 2006
Hello,
We are running SQL2K5 and have a Web server with a family of sites all sharing an identical connection string to enable ADO connection pooling between them. Today for about 20 minutes we had several (all?) connections from one site that uses a specific DB get a connection reuse error which showed in out SQL logs:
DESCRIPTION: The client was unable to reuse a session with SPID #, which had been reset for conection pooling. This error may have been caused by an earlier operation failing. Check the error logs for failed operations immediately before this error message.
We also have SQL Server slowdown and log in problems from other applications that seemed a symptom of this, or some third unknown cause. Note, the # means the run-time spid number was inserted. The misspelling "conection" comes right out of sys.messages (it is not our custom error):
select top 10 * from sys.messages where message_id = 18056
The immediately preceeding error in the SQL Log was always:
Message
Error: 18056, Severity: 20, State: 29.
Where Severity and State vary, but "Error: 18056" is consistent, although I can find no documentation on "Error: 18056" through Google or MSDN.
Also, the "The client was unable to reuse a session ..." error seems not to be referred to anywhere.
In our IIS logs, the matching entries are of the form:
[DBNETLIB][ConnectionRead (recv()).]General network error. Check your network documentation.
and
Invalid connection string attribute
My questions: Does anyone have experience with this error? We have real good history with ADO connection pooling, but can a "bad" connection be pooled, and if so can it be "flushed" or the pool "drained"?
Thank you for anything you have to offer!
View 13 Replies
View Related
Dec 27, 2007
Hi,
I am working on SQL Server 2005 (x64) with Windows Server 2003 (x64) operating system. I am having a major issue in SSIS. Here is the detailed explanation of the issue :
I have an EXCEL file in 2003 / 2007 version. It contains some data. I want to import the data using SSIS into SQL Server 2005 (x64) database table. I have taken "EXCEL FILE SOURCE" and "SQL Server DESTINATION". It was failed on importing data. Surprisingly it works fine in SQL Server 2005 (x32). Can you please explain why it is NOT woking on (x64) ?
Here is the error code i am getting:
[Excel Source [1]] Error: The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.
Appreciate your time and patience !!
Thanks
View 3 Replies
View Related
Mar 17, 2008
Greetings,
I have an SSIS package that I need to modify. It was developed in Visual Studio 2005 and runs faithfully in production on SQL Server 2005. Suddenly, I can't open the package on my own workstation. I see a big red "X" image and a message stating "Microsoft Visual Studio is unable to load this document." The real reason the document can't be loaded appears to be:
Error loading DataWarehouseLoader.dtsx: The connection type "OLEDB" specified for connection manager "Warehouse Logging OLE DB" is not recognized as a valid connection manager type. This error is returned when an attempt is made to create a connection manager for an unknown connection type. Check the spelling in the connection type name.
Does anyone know what causes this and what I can do? The package has been in production for 9 months and I've never seen this problem before.
Thanks,
BCB
View 10 Replies
View Related
Feb 22, 2006
Hello,
On my dev server I have working ssis packages that use connections Microsoft OLEDB provider for Oracle MSDAORA.1 and Oracle provider for oledb and OracleClient data provider.
I use one or the other according to my needs.
In anticipation and to prepare for the build of a new production server, I have build a test server from scratch and deployed to it the entire dev.
Almost everything works except Microsoft OLEDB provider for Oracle.
ssis packages on the test machine will return an error
Error at Pull Calendar from One [OLE DB Source [1]]: The AcquireConnection method call to the connection manager "one.oledb" failed with error code 0xC0202009.
Error at Pull Calendar from One [DTS.Pipeline]: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.
[Connection manager "one.oledb"]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle error occurred, but error message could not be retrieved from Oracle.".
I have used the same installers for OS, SQL and Oracle SQL*Net on both dev and test machines. The install and then the restore/deployment on Test went fine.
Does anyone could point me to the right direction to solve this issue?
Thanks,
Philippe
View 17 Replies
View Related
Feb 6, 2008
I have a package that uses a for loop to iterate through an unknown amount of excel files and pull their data into a table. However, there will be cases when the file is corrupted or has some sort of problem so that either the transformation will fail or the excel data source will fail with an oledb connection error.
Could anyone suggest a clean way to trap these errors? Specifically, the "Cannot Aquire Connection from Connection Manager", which is the excel connection.
Thanks,
John T
View 3 Replies
View Related
Apr 7, 2008
When running the project in debug mode or non-debug mode, I get the following error from MS Visual Studio:
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at Package [Connection manager "SYBASE_CONNECTION"]: The connection manager failed to defect from the transaction.
(Microsoft.DataTransformationServices.VsIntegration)
------------------------------
BUTTONS:
OK
------------------------------
Any ideas???
View 8 Replies
View Related
Apr 15, 2015
I use SQL Server 2012 and visual studio 2010.I created SSIS Project with task "Execute Package". Control flow view as: Package1 (execute package) -> Package2 (data flow).Data flow in Package2 view as: ADO.NET source -> ADO.NET destination.
When I started Package2, it's work. I havn't errors.But when I started Package 1 I have error "Unable to get managed connection from the Connection Manager runtime". In execution log I see that ADO.NET source produced this error on verification stage. Package failed on verification stage, not on execution stage.Why when I started Package 2 it work, but when I started Package1 (and Package1 started Package2) it failed?
View 14 Replies
View Related
Feb 14, 2008
Hi All,
I am getting the following error if I am using the package "Transaction Option=Required" while running through Sql Job:
The AcquireConnection method call to the connection manager "<connection name>" failed with error code 0xC0202009.
while I running the SSIS package on BI environment, I am getting the following error:
[Connection manager "<connection name>"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.".
I know the alternative solution is to make the "Transaction Option=Supported", but in my case I have run the whole flow in a single transaction. I came to know that this has been fixed in the service pack1(ref. to http://support.microsoft.com/kb/914375). FYI.. some time it was running successful.
I have taken all the necessary step to run the SSIS package in a distributed transaction(like the steps for MSDTC) and also created the package flow in a sequence.
I was going through the link - http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=160340&SiteID=1 but all those didn't solve my problem.
If anyone can help me it will be great. or it is a bug in SSIS?
Thanks.
Jena
View 5 Replies
View Related
Jun 22, 2006
I have a Rounding error: Between flat file connection manager Source & OLE DB Connection Destination (SQL Server 2005) in my Dataflow.
File looks like this lets call column names Col A,B,C,D
70410000 RD1 1223631.92 196042.42
70329000 ICD 11025.84 3353.88
71167300 COL 104270.59 24676.96
flat file connection manager settings: first row Column names then Advanced tab Col A float , Col B float , Col C string ,Col D float ,
OLE DB Connection Destination (SQL Server 2005)
CREATE TABLE [dbo].[PT_CUST_ABR](
[PARTY_NO] [float] NULL,
[PARTY_NAME] [varchar](75) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[TELECOMABR] [float] NULL,
[GENIABR] [float] NULL,
Problem: ColA (Source) Rounding error to PARTY_NO (Destination)
I have a field of text of in a flat file that the flat file connection manager Source picks up correctly €œ70000893€?
However when it gets the OLE DB Connection Destination the data has changed to 70000896. That€™s before its even Written to the database.
The only clue that something is wrong in the middle is the great Data viewer shows the number as 7.000009E+07
Other clues looking at the data it appears there is a rounding error on only the number that dont end in 00
ColA (Source) PARTY_NO (Destination)
71167300 71167296
70329000 70329000
70410000 70410000
Any ideas people?
Thanks in advance
Dave
View 3 Replies
View Related
Dec 17, 2007
hi all,
i got the error, when i run my package after deploy into the server machine;
i can able to run that package in my local machine, if i deploy it to the server or some remote machine, its not running, and rises error messages, that says cant accquire connection from the connection manager;
the problem might be with the login name and password; i could not see any password in any of my config file, or connection manager while running the package.
how to resolve this problem?? please help me!
View 6 Replies
View Related
Jul 17, 2002
We are looking at consolidating our servers. We would like to have a database server, which housing our databases. However, we have some SQL 6.5 databases and Oracle 8.0.1 databases. Does anyone know if it is possible to have both on one server? If not, then it sounds like we need two database servers. Thank you.
View 1 Replies
View Related
Feb 19, 2015
I have a child package where the ConnectionString property of a Connection Manager is set by a Parent Package Variable Configuration. I set up a script task that brings up a message box with the value of the ConnectionString property right before the dataflow task.
MessageBox.Show(Dts.Connections["CPU_*"].ConnectionString.ToString());When I run the parent package, the message box shows that the connection string is changing with every iteration, but in the dataflow it always draws the data from the same source.
The connection manager is an ADO.Net type, RetainSameConnection is set to False, and I've been researching this for days.
(Update 2/23/2015): To make this stranger, when I look at the diagnostic logs, they tell me that when the new connections are being opened they are using the new connection strings.
View 2 Replies
View Related
Mar 30, 2007
Hello,
I've created a SSIS Solution and have created Data Sources. I have two packages. One was created before the Data Sources, and one was created after. The package that was created after is using connections from the Data Sources. I want to change the package before the Data Soruces were created to use them, but when I right click in the Connection Managers pane "New Connection From Data Source.." is not an option.
Did I not add it to the Solution properly?
How do I get it to show?
Did I not refresh something?
Please provide the how if you figure it out.
Thanks
View 4 Replies
View Related
Jul 26, 2006
How would one go about using an ODBC connection with SSIS. I'm trying to ETL some Sybase ASE data, but I get the error when I try it:
"cannot acquire a managed connection from the run-time connection manager"
This wasn't any help:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=169777&SiteID=1
View 1 Replies
View Related
Jul 3, 2007
This is the first time I have used SSIS, so please bear with the ignorance.
I have a super simple package that inserts x000's of rows into a temporary table. The data source is a file that the user will upload. I need to be able to tell the package what file to upload. I'm thinking the simplest thing would be to edit the connectionString property of the SourceConnectionFlatFile at runtime. Is this possible? What form should the file path be in (UNC, other)? And, are there any other considerations I should be aware of?
Thanks!
View 1 Replies
View Related
Aug 9, 2006
Is there anyone who tried to use a connection from connection manager to create a new connection in a script task? Including the password?
Now i passed the connection to the script task and called it in the vb script but then the password is not passed into the connect string.
Im searching for an example that works with passing the password in the connectstring?
Any help will be greatfull.
View 1 Replies
View Related
Apr 16, 2008
hi,
i have Oracle Enerprise Manager installed and want to connect to SQL Server instance. can i, if yes please suggest me.
thanks in advance
Helin Shah
View 3 Replies
View Related
Jan 16, 2008
Is there a way by which we can make the Connection in the connection manager retry for a certain amount of time?
I have a DataFlow Task which uses a OLE Source which is connected to a database. there are time when the connection to the database is not available due to some transport level error. so i wanted the connection manger to make a couple of tries before giving up and saying that it was not able to connect and it timed out..
i have the Connect TimeOut and the General Timeout properties set to 0, but is there a way to retry?
Thanks for any help in advance
View 1 Replies
View Related
Jul 13, 2007
My source files are in C:Process folder. File names are in the format proc*.csv
I am using foreach loop container to iterate over the files in folder "C:Process"
I have a user variable "filename"
The order of my tasks
ForEach - Data Flow task - File System Task
In Data Flow task, I have ole db source which should take the dynamic filename from user variable "filename". whats happening is when i give fixed filename, without foreach loop container the package is working fine.
with dynamic filename, I am not able to run the package because of ole db source Error - cannot aquire connection from connection manager.
Thanks for u'r help.
View 9 Replies
View Related
Jun 1, 2007
I'm currently using:
Dts.Connections.Item("myADO.NET connection").AcquireConnection(Nothing)Dim conn As New SqlClient.SqlConnection(Dts.Connections.Item("myADO.NET connection").ConnectionString)
conn.Open()
This seems silly, in that I'm not really using the same connection, but using the connection string of a connection that already exists. And, for my purposes, it's not working currently, because I've switched from Windows Authentication to SQL Auth... and the password isn't coming over in the ConnectionString property.How do I re-use the exact same ADO.NET connection I have in my connection manager in a script task? That's the recommended way to go, right?
View 3 Replies
View Related
Jul 19, 2007
Hallo,
I have deleted one of my file connection from Connection Manager (and
Executed ProcessTask which used it), however
trying to load the package I always get the error:
"Error loading MyPackage.dtsx: The connection "MyDeletedConnectionName" is not found.
This error is thrown by Connections collection when the specific connection element is not found."
I tried to Clean, Rebulid my project, but it doesn't help.
Does anybody know, how to solve it? Where this reference is saved?
Thank you.
Anna
View 3 Replies
View Related
Feb 27, 2006
Hi,
I'm on a shared MS SQL server, and I have access on 2 databases there.On the server there are many other database, I guess around 170.When I want to access my database I open enterprise manager choose the server from the server list and click on "databases" to list all databases. This last step (listing all databases) takes ages to complete, it takes something like 3 minutes to show all databases so I can click my database from the list and do my thing.
Isn't there any way to only view my own databases and not showing the others. I can't access the others so there's really no point in showing them anyway, it only takes time.
View 1 Replies
View Related
Dec 27, 2005
IN the enterprise manager I could see my database server but could not see the databases.Bur I can see the databases and database objects in quesry analyzer. What should be the problem and how can see the databases from my enterprise manager.
Thanks.
View 2 Replies
View Related
Jul 12, 2006
Please forgive my ignorance - I'm completely new to MSSQL.
Our office bought a set of Laserfiche licenses and had to also buy MSSQL to handle the database end of things. Part of my job is to make sure everything gets backed up. I want to use Enterprise Manager to back up the databases which seems straightforward enough - even though I've never done it.
Our Network Admin has installed a temporary USB drive to hold our back-ups until a more permanent form of media can be installed. He is using drive compression to maximize the space available. The server sees it as Drive F:
I created a folder on F: to contain my MSSQL Back-ups. Then I opened Enterprise Manager and clicked on SQL Server Group, which contains two databases:
(local) (Windows NT)
and
CYWD_IMAGE/LASERFICHE (Windows NT)
My understanding is that they both have to be backed up.
I clicked on the first one, then selected the Database Maintenence Plan Wizard from the 'Tools' menu. I stepped through the process (choosing 'all databases') until I got to the point where I could specify the back-up directory. I was able to browse right to the folder I created and choose it. I could then finish the process normally. The problem is that when I selected the second database (CYWD_IMAGE/LASERFICHE) and launched the wizard I was unable to browse to my folder. I could choose the F: Drive but no folder showed up under it. Oddly, it would not even show me my D: partition (just thought I'd mention that in case it is somehow relevent).
I don't see any difference in the properties tabs between these two databases. The obvious difference is the name, and that one says (local) and the other does not.
I really don't want to choose to dump the back-up into the root of F:
Can anyone tell me what I'm doing wrong?
Thanks in advance.
Mac
View 6 Replies
View Related
