Connection String Error
Aug 15, 2006
Hello I need some help please.
I created a connection string in my web config. I then tried to call it in one of my c# pages but I get a "System.InvalidOperationException: Instance failure" every time I run it.
Please review my code and let me know what I am doing wrong.
Thank you in advance for all the help
Web Config
<appSettings>
<add key="AVConnection" value="Server=Server; Database=DB; User ID=sa; Password=PWD" />
</appSettings>
//////calling connection and running a simple SQL statment///////
protected void Page_Load(object sender, EventArgs e)
{
string ConnApp;
ConnApp = System.Configuration.ConfigurationManager.AppSettings["AVConnection"];
Response.Write(ConnApp);//the string is being passed this far
SqlConnection objConn = new SqlConnection(ConnApp);
SqlCommand sqlCMD = new SqlCommand("Select * FROM Employee", objConn);
objConn.Open();//this is where the error occures
SqlDataReader objRdr = sqlCMD.ExecuteReader();
Repeater1.DataSource = objRdr;
Repeater1.DataBind();
objConn.Close();
objRdr.Close();
}
ERROR PAGE
Line 29: SqlCommand sqlCMD = new SqlCommand("Select * FROM Employee", objConn);
Line 30:
Line 31: objConn.Open();
Line 32: SqlDataReader objRdr = sqlCMD.ExecuteReader();
Line 33: Repeater1.DataSource = objRdr;
[InvalidOperationException: Instance failure.]
System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +683775
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
employeelist.Page_Load(Object sender, EventArgs e) in c:InetpubwwwrootFAUAVemployeelist.aspx.cs:31
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +15
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +34
System.Web.UI.Control.OnLoad(EventArgs e) +99
System.Web.UI.Control.LoadRecursive() +47
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1061
View 2 Replies
ADVERTISEMENT
May 24, 2007
Hi All...
I am trying to move my site (incomplete) for testing and I am finding that the Db connection process to be
the most difficult, well back to my problem. I can't seem to get past this error and am frustrated with overall
connectivity problems. Please help!!!
===================================================================================
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +820
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42
System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83
System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160
System.Web.UI.WebControls.Login.AttemptLogin() +105
System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35
System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210
Now you all must admit that, if your somewhat new to this databasing, It's a ***.
The source for my application is Visual Web Designer 2005 Express
It is an ASP.Net driven site with membership roles and all the good stuff.
the latest theory is that I need to change the provider config in the web.config file from AspNetSqlProvider
to something else. Most of my complications and frustrations come from GoDaddy and no access to the
shared server (understandibly).
I hope I gave enough info for help and not too much..
Dave
View 4 Replies
View Related
Jan 29, 2008
Hi, I'm very new to SQL server so please excuse. Basically I'm trying to connect 6 text boxes on my web form to my sql database using c#. The following lines of code behind my save button pops up with this error. "NullRefernrenceException was unhandled by user code - Object reference not set to an instance of an object". I think its something small but as I said I'm only new so I dont have much of a clue. protected void btnSave_Click(object sender, EventArgs e) { String strConn = ConfigurationManager.ConnectionStrings["conLocalDatabase"].ConnectionString; SqlConnection dbConnection = new SqlConnection(strConn); SqlCommand dbCommand = new SqlCommand(); SqlDataReader dbReader Any help would be much obliged.
View 10 Replies
View Related
May 2, 2008
hi, i am facing a problem:"An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact that
under the default settings SQL Server does not allow remote connections.
(provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance
Specified)"my web config code is <connectionStrings> <add name="ConnectionString" connectionString="Data Source=.kindleinfotech.com;AttachDbFilename=|DataDirectory|database.mdf;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient" /> </connectionStrings>here kindleinfotech.com is the name of server.how this problem can be solved.
View 12 Replies
View Related
Jun 12, 2008
Hello all
First Problem:
I tried to get the connection string from web.config using Configuration manager
-------------code------------------
ConfigurationManager.AppSettings("MyProBD");
-------------code------------------
the below error was occurred
-------------Error------------------
Error 1 The name 'ConfigurationManager' does not exist in the current context-------------Error------------------
Second Problem
when declare connection string in the code
-------------code------------------string strConnection = "Data Source=(local); Initial Catalog=MyProDB; Integrated Security=SSPI;";
con.ConnectionString = strConnection;
-------------code------------------
the below error was occurred
-------------Error------------------
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
-------------Error------------------
any help Please
View 7 Replies
View Related
Jun 5, 2007
<add name="TimeTrackingDB" connectionString="provider=MSSQL$DEV_2000;Integrated Security=SSPI;Data Source=PORT06139DEV_2000;Initial Catalog=TimeTracking;Persist Security Info=True;User ID=user_TTT;Password=user_TTT;pooling=false;"/>
When i'm lauching the web application, i have an error message saying that there is a mistake with the provider...
I'm using Microsoft SQL Server 2000.
Anybody can help me?
Thanks by advance :)
View 2 Replies
View Related
Feb 5, 2007
OK - I have seen lots posted on this, but the behavior is very strange, and I am trying to understand:
I am using Visual Basic 2003 with SQLEXPRESS 2005 to connect to a database and to develop a desktop application. My connection string is:
Conn_Str = "Data Source=.SQLExpress;AttachDbFilename=" & _
Directory.GetCurrentDirectory & "CWW.mdf;" & _
"Trusted_Connection=Yes;"
I get the following error:
"An attempt to attach an auto-named database for file C:Documents and SettingsBrianMy DocumentsCompressor Program DevelopmentinCWW.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share."
However, if I copy the database to anywhere else on the "c:" drive, the connection works, as in the following:
Conn_Str = "Data Source=.SQLExpress;AttachDbFilename=" & _
"C: empCWW.mdf;" & _
"Trusted_Connection=Yes;"
What I have found is that ist works everywhere on my computer except in the following location:
"c:documents and settingsBrian", which includes My Documents, Desktop folders.
Why is this??
Any help would be great - I can work around this by moving my development folder to the "c:" drive. Since my ultimate application directory will be the "Program Files" directory I should be fine.
View 5 Replies
View Related
Jul 25, 2006
I have been having a problem trying to connect to a SQL Server. I have installed the Developer edition on an MS Small Business edition 2003 server
I also installed MS Sql Manager and I was able to create a database and connect to it. The database server is in the same PC. I used the surface configuration to enable remote connections using TCP /IP and pipe lines.
My application runs without a problem on my development machine but when I deployed on this server I get the provider: SQL Network Interfaces, error: 25 - Connection string is not valid Error.
this is my config file setup
<connectionStrings> <add name="Diamond_dbConnectionString" connectionString="Data Source=192.168.1.104MSSQLSERVER;Initial Catalog=Diamond_db;Integrated Security=True" providerName="System.Data.SqlClient" /> </connectionStrings>
I have google and yahoo this error I found a lot of information I've tried many of them but still having the problem. I will appreciate your help solving this problem. I have a customer waiting since last week to see this site and I'm still stuck.
Tia
Charles
PS. Below I pasted the complete error info I get.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +734995
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +820
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior) +162
System.Data.Common.DbDataAdapter.Fill(DataTable dataTable) +107
DiamondTableAdapters.COUNTRIES_TEMPLATETableAdapter.GetContriesTemplate() +108
[TargetInvocationException: Exception has been thrown by the target of an invocation.]
System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +0
System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +72
System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) +296
System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) +29
System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance) +482
System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +2040
System.Web.UI.WebControls.BaseDataList.GetData() +53
System.Web.UI.WebControls.DataList.CreateControlHierarchy(Boolean useDataSource) +284
System.Web.UI.WebControls.BaseDataList.OnDataBinding(EventArgs e) +56
System.Web.UI.WebControls.BaseDataList.DataBind() +72
System.Web.UI.WebControls.BaseDataList.EnsureDataBound() +55
System.Web.UI.WebControls.BaseDataList.CreateChildControls() +63
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +41
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
View 6 Replies
View Related
Feb 2, 2007
I have installed SQL Server 2005 Developer edition. When I open SQL Server Management Studio, and try to connect to the database engine, I enter these credentials:Server name: LT2000MSSQLSERVERLogin: saPassword: my passwordWhen I try to connect I receive the following error:An error has occured while trying to establish a connection to the server. When connecting to SQL server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.(provider: sql network interfaces, error:25 - connection string is not valid)(Microsoft SQL Server, Error:87)What can I do?
View 5 Replies
View Related
Jan 5, 2005
Hi;
Installed MSDE on computer by running:
c:setup INSTANCENAME="VSdotNET" SAPWD="PASSWORD" SECURITYMODE=SQL
REBOOTED AND sql SERVER iCON APPEARS on the lower desktop Icon bar, open it and it says:
Server: JOHN Servises: SQL Server Running \JOHN - MSSQLServer
opened a command prompt at c: and
entered osql -S JOHN -U sa -P password
and got the 1> reply on the next line
I typed EXIT
I had downloaded two scripts that create Pubs and Northwind SQL databases. I put them in the C: folder
I Typed at c:osql -E -i instpubs.sql
It created the pubs SQL database for me
I Typed at c:osql -E -i instnwinds.sql
It created the nwinds SQL database for me
I closed the command prompt and
went to the Administrator Tools in the Control Panel
I selected Data OLEDB Selected ADD entered Pubs and used default values for Pubs to create a connection Tested it OK
Then went and ran Visual Studio Net 2003
Checked to see if the pubs and northwind SQL databases where present in the Server Explorer drop down window.
I seleced the connect to database Icon and in it's Data Link Properties
I entered JOHN for server name
pubs for selected database on the server
with Provider as MS OLEDB for SQL Service
the Icon changed to connected.
I entered this in the code for page_load
Dim MyDS As New DataSet
Dim ConnStr As String
Dim SQL As String
ConnStr = "server=(local)C:Program FilesMicrosoft SQL ServerMSSQLData;database=pubs;Trusted_Connection=yes"
SQL = "SELECT * FROM Titles " & _
"SELECT * FROM Publishers"
Dim MySqlConn As New SqlConnection(ConnStr)
Dim MySqlAdapter As New SqlDataAdapter(SQL, ConnStr)
'The SqlDataAdapter will automatically open and
'close the SqlConnection
MySqlAdapter.Fill(MyDS)
But I can not get this to work it errors out on line:
MySQLAdapter.Fill(myDS)
with: [SqlException (0x80131904): Unknown ProviderError Locating Server/Instance Specified ]
System.Data.ProviderBase.DbConnectionPool.GetConnection(Object owningObject) +317
I change ConnStr to this:
ConnStr = "server=(local)data;database=pubs; uid=sa; Pwd=password" & _
"Trusted_Connection=true"
and get this error:
[SqlException (0x80131904): Shared Memory Provider: The system cannot find the file specified.
]
System.Data.ProviderBase.DbConnectionPool.GetConnection(Object owningObject) +317
I've tried so many combination with and without user and password, I just don't get it, spent three long days stuck here, can someone help me out.
Note:
C:Program FilesMicrosoft SQL ServerMSSQLData
Is the accual location on my machine that pubs database is located.
I can use the pubs SQL database in Web Matrix OK.
Thanks
pdqjohnny@hotmail.com
View 2 Replies
View Related
Mar 26, 2008
'conn info
Const localConnectionString As String = "Data Source = TestDB.sdf"
Const serverConnectionString As String = "Server=myserver;database=BoxDB;Integrated Security=True;"
Sub CreateUploadOnlyTable()
Dim rda As SqlCeRemoteDataAccess = Nothing
Try
rda = New SqlCeRemoteDataAccess()
rda.LocalConnectionString = localConnectionString
rda.InternetUrl = "http://myserver/BoxCE/sqlcesa30.dll"
rda.Pull("temp_Swipes", "SELECT * FROM Swipes WHERE 1 = 0", serverConnectionString, RdaTrackOption.TrackingOnWithIndexes, "Swipe_Errors")
Catch ex As Exception
MsgBox(ex.ToString)
SaveTextToFile(ex.ToString, "CreateUploadOnlyTable.txt", "RDA Error!")
Finally
rda.dispose()
End Try
End Sub
when i try to run it on my CE device i get an error which i have no idea about and can't resolve via google'ing.
"multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. no work was done"
My aim here is just a basic Pull (but containing no data hence the 'WHERE 1=0')
Any answers to this error? is it my conn string? i did have conn string errors earlier and am guessing they are linked.
View 5 Replies
View Related
Jul 9, 2007
I am trying to connect to a failover partner using ADO (non .Net) and Visual C++. ADO is throwing the following exception:
Caught: Unspecified error - Invalid connection string attribute(Microsoft OLE DB Provider for SQL Server)
Connection String:
Provider=SQLOLEDB.1;Data Source=EdwardsvilleSQLSERVER;Failover Partner=Mirror2SQLSERVER;Initial Catalog=SomeCatalog;User Id=SomeId;Password=SomePassword
Any ideas?
View 4 Replies
View Related
Apr 9, 2008
hi
i am working with Asp.net2.0,Sqlserver2000.
i uploaded my developed application to the webserver.
all webpages are opening..bt when i try to interact with database it is raising error as following..
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
i set Enamble to namedPipes,Tcp/IP
i set Remote connection to enable
my web.config looks like this..
<?xml version="1.0"?>
<configuration> <appSettings>
<add key="cn" value="User ID=redot;Password=redot;Data Source=216.185.43.148:1423;Initial Catalog=redot" /> <!--<remove key="LocalSqlServer"/> ;ProviderName=System.Data.SqlClient-->
</appSettings> <connectionStrings> <!--<remove name="LocalSqlServer"/>-->
<add name="redotConnectionString" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString1" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString2" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString3" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString4" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString5" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString6" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString7" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString8" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString9" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString10" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> </connectionStrings> <system.web>
<sessionState mode="InProc" stateConnectionString="tcpip=127.0.0.1:42424" sqlConnectionString="data source=216.185.43.148:1423;User ID=redot;Password=redot;Trusted_Connection=True" cookieless="false" timeout="60" />
<compilation debug="true" /> <!-- The <authentication> section enables configuration of the security authentication mode used by ASP.NET to identify an incoming user. -->
<customErrors mode="Off"> <error statusCode="404" redirect="filenotfound.htm" /> </customErrors>
</system.web> <system.net>
<mailSettings>
<smtp> <network host="216.185.54.55" port="25" /> </smtp> </mailSettings>
</system.net></configuration>
i will be very thankful ,if anyone help me to resolve this problem..
pls..its urgent for me
Thanks& Regards
Shobha
View 1 Replies
View Related
Jul 26, 2015
Error: The variable "$Package::LocalConfigDB_ConnectionString" was not found in the Variables collection. The variable might not exist in the correct scope.
Error: Attempt to parse the expression "@[$Package::LocalConfigDB_ConnectionString]" failed and returned error code 0xC00470A6. The expression cannot be parsed. It might contain invalid elements or it might not be well-formed. There may also be an out-of-memory error.
View 3 Replies
View Related
Aug 23, 2006
I added a connection (ADO.NET) object by name testCon in the connection manager - I wanted to programmatically supply the connection string. So I used the "Expressions" property of the connection object and set the connectionstring to one DTS variable. The idea is to supply the connection string value to the variable - so that the connection object uses my connection string.
Then I added a "Backup Database Task" to my package with the name BkpTask. Now whenever I try to set the connection property of BkpTask to the testCon connection object, by typing testCon, it automatically gets cleared. I am not able to set the connection value.
Then after spending several hours I found that this is because I have customized the connection string in testCon. If I don't customize the connection string, I am able to enter the "testCon" value in the connection property of the BkpTask.
Is this an intrinsic issue?
View 2 Replies
View Related
Sep 27, 2007
Hi,
I'm having a BIG problem, this is my 3rd day looking for answer !I'm trying to create a custom membership provider with MS SQL database 2005 but not the default ASPNETDB. I've changed the web.config to be as following:<connectionStrings><add name="sqlConn" connectionString="Data Source=.;Integrated Security=True;Initial Catalog=ASPNETDB;"providerName="System.Data.SqlClient" /></connectionStrings> <system.web><trace enabled="true" /><roleManager enabled="true" /><authentication mode="Forms" />
<membership defaultProvider="MySqlProvider"><providers><remove name="AspNetSqlProvider"/><add name="MySqlProvider" connectionStringName="SqlConn" type="System.Web.Security.SqlMembershipProvider" applicationName="/" /></providers></membership>
But when I try to login to the site using the login control the following error occurs:
Server Error in '/etest' Application.
Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: The connection name 'LocalSqlServer' was not found in the applications configuration or the connection string is empty.Source Error:
Line 149: <roleManager>
Line 150: <providers>
Line 151: <add name="AspNetSqlRoleProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
Line 152: <add name="AspNetWindowsTokenRoleProvider" applicationName="/" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
Line 153: </providers>Source File: C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Configmachine.config Line: 151
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.213
It is clear that this is a prblem with my Machine.Config file - since I've "worked!" on this file for a while. But when I've checked the Machine.config file I've found the LocalSqlServer connection it is talking about! .
I'm lost and I dunno what to do, can anyone help?
Here is the mahine.config in case if you need it:<connectionStrings>
<add name="LocalSqlServer" connectionString="data source=.;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" /></connectionStrings>
<system.data><DbProviderFactories>
<add name="Odbc Data Provider" invariant="System.Data.Odbc" description=".Net Framework Data Provider for Odbc" type="System.Data.Odbc.OdbcFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" /><add name="OleDb Data Provider" invariant="System.Data.OleDb" description=".Net Framework Data Provider for OleDb" type="System.Data.OleDb.OleDbFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add name="OracleClient Data Provider" invariant="System.Data.OracleClient" description=".Net Framework Data Provider for Oracle" type="System.Data.OracleClient.OracleClientFactory, System.Data.OracleClient, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" /><add name="SqlClient Data Provider" invariant="System.Data.SqlClient" description=".Net Framework Data Provider for SqlServer" type="System.Data.SqlClient.SqlClientFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add name="SQL Server CE Data Provider" invariant="Microsoft.SqlServerCe.Client" description=".NET Framework Data Provider for Microsoft SQL Server 2005 Mobile Edition" type="Microsoft.SqlServerCe.Client.SqlCeClientFactory, Microsoft.SqlServerCe.Client, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" /></DbProviderFactories>
</system.data><system.web>
<processModel autoConfig="true" /><httpHandlers />
<membership><providers>
<add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="LocalSqlServer" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="/" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression="" /></providers>
</membership><profile>
<providers><add name="AspNetSqlProfileProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Profile.SqlProfileProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</providers></profile>
<roleManager><providers>
<add name="AspNetSqlRoleProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /><add name="AspNetWindowsTokenRoleProvider" applicationName="/" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</providers></roleManager>
</system.web>
View 8 Replies
View Related
Sep 16, 2015
I am using sqljdbc41.jar to connect with MSSQL database, it is working fine on my local machine.Where as on the remote server, same class giving me error
Login failed for user '<domain><windows loginID>'
My connection string is URL...
I am using sqljdbc41.jarĀ and on 64 bit processor , I am using following command which included path for sqljdbc_auth.dll java -Djava.library.path= C: sqljdbc_4.1enuauthx64 TestDao and error is Login failed for user '<domain><windows loginID>' why it is not picking up username passed in connection string. I have 2 machines, one is local and other is remote. on both machine I login using my domain, it is working absolutely fine on local then why the error is coming on remote machine.Both the machines are identical.
View 4 Replies
View Related
Jan 18, 2008
I have been trying to host my website on Go Daddy for about 3 weeks and I have cleared several problems but this one remains. I can get into the ASPNETDB database for doing logins , etc but I cant access my database called "PINEmgt".
To try to understand where the problem is located,I built a very simple application without login controls and put on it one Detailform accessing a single line table "Signin". I continually get the error message I got with my real app :"The connection name 'PINEMgtConnectionString2' was not found in the applications configuration or the connection string is empty. " There is only one connection string in my app -'PINEMgtConnectionString2'. When I run the app locally on my machine it works. After I move everything to Go Daddy, I get the error message and the following dump"
Line 24: </Fields>
Line 25: </aspetailsView>
Line 26: <aspqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStringsINEMgtConnectionString2 %>"
Line 27: InsertCommand="INSERT INTO Signup(first_name, last_name, email, customer_id) VALUES (,,,)"
Line 28: SelectCommand="SELECT * FROM [Signup]"></aspqlDataSource>
This is indeed the code from my single page app.
The dump is:
[InvalidOperationException: The connection name 'PINEMgtConnectionString2' was not found in the applications configuration or the connection string is empty.]
System.Web.Compilation.ConnectionStringsExpressionBuilder.GetConnectionString(String connectionStringName) +3039085
ASP.default_aspx.__BuildControlSqlDataSource1() in d:hostinguck7scoutDefault.aspx:26
ASP.default_aspx.__BuildControlform1() in d:hostinguck7scoutDefault.aspx:10
ASP.default_aspx.__BuildControlTree(default_aspx __ctrl) in d:hostinguck7scoutDefault.aspx:1
ASP.default_aspx.FrameworkInitialize() in d:hostinguck7scoutDefault.aspx.vb:912306
System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +40
System.Web.UI.Page.ProcessRequest() +86
System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) +18
System.Web.UI.Page.ProcessRequest(HttpContext context) +49
ASP.default_aspx.ProcessRequest(HttpContext context) +29
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +303
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
After Googleing, asking Go Daddy for info (which they dont give) , etc for three weeks, I need serious mental help
in the form of a solution of this problem. Your help with the problem or the name of a good mental health professional in eastern N.C. (maybe both) would be appreciated.
View 10 Replies
View Related
May 30, 2008
I have seen another thread with this same problem, but the problem seemed to be a typo. I am getting an error when I try to access the web site ..
The connection name 'USASH-AS0013' was not found in the applications configuration or the connection string is empty.
However, in my web.config file I do have a connection named USASH-AS0013. Here is my web.config file (with my user/pwd hidden). Any help would be greatly appreciated.
<?xml version="1.0"?>
<!--
Note: As an alternative to hand editing this file you can use the
web admin tool to configure settings for your application. Use
the Website->Asp.Net Configuration option in Visual Studio.
A full list of settings and comments can be found in
machine.config.comments usually located in
WindowsMicrosoft.NetFrameworkv2.xConfig
-->
<configuration>
<appSettings/>
<connectionStrings>
<add name="USASH-AS0013" connectionString="Provider=SQLOLEDB;Data Source=USASH-AS0013;User ID=****;Password=*****;Initial Catalog="Smart Factory""
providerName="System.Data.OleDb" />
</connectionStrings>
<system.web>
<!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
Visual Basic options:
Set strict="true" to disallow all data type conversions
where data loss can occur.
Set explicit="true" to force declaration of all variables.
-->
<compilation debug="true" strict="false" explicit="true"/>
<pages theme="MySkin" >
<namespaces>
<clear/>
<add namespace="System"/>
<add namespace="System.Collections"/>
<add namespace="System.Collections.Specialized"/>
<add namespace="System.Configuration"/>
<add namespace="System.Text"/>
<add namespace="System.Text.RegularExpressions"/>
<add namespace="System.Web"/>
<add namespace="System.Web.Caching"/>
<add namespace="System.Web.SessionState"/>
<add namespace="System.Web.Security"/>
<add namespace="System.Web.Profile"/>
<add namespace="System.Web.UI"/>
<add namespace="System.Web.UI.WebControls"/>
<add namespace="System.Web.UI.WebControls.WebParts"/>
<add namespace="System.Web.UI.HtmlControls"/>
</namespaces>
</pages>
<!--
The <authentication> section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user.
-->
<authentication mode="Windows"/>
<!--
The <customErrors> section enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />
</customErrors>
-->
</system.web>
</configuration>
View 3 Replies
View Related
Feb 19, 2015
I have a child package where the ConnectionString property of a Connection Manager is set by a Parent Package Variable Configuration. I set up a script task that brings up a message box with the value of the ConnectionString property right before the dataflow task.
MessageBox.Show(Dts.Connections["CPU_*"].ConnectionString.ToString());When I run the parent package, the message box shows that the connection string is changing with every iteration, but in the dataflow it always draws the data from the same source.
The connection manager is an ADO.Net type, RetainSameConnection is set to False, and I've been researching this for days.
(Update 2/23/2015): To make this stranger, when I look at the diagnostic logs, they tell me that when the new connections are being opened they are using the new connection strings.
View 2 Replies
View Related
Jan 4, 2006
I came across something strange today. I was wondering I was doing something wrong.
View 7 Replies
View Related
Jul 3, 2007
This is the first time I have used SSIS, so please bear with the ignorance.
I have a super simple package that inserts x000's of rows into a temporary table. The data source is a file that the user will upload. I need to be able to tell the package what file to upload. I'm thinking the simplest thing would be to edit the connectionString property of the SourceConnectionFlatFile at runtime. Is this possible? What form should the file path be in (UNC, other)? And, are there any other considerations I should be aware of?
Thanks!
View 1 Replies
View Related
May 15, 2007
Good Morning,
I hope that I am just missing a step in the process somewhere. I have established a string variable called DatabaseServer and another called DatabaseName. In the OLE DB connectionstring expression I have the following:
Code Snippet
"Data Source=" + @[User::DatabaseServer] + ";Initial Catalog=" + @[User::DatabaseName] + ";Provider=SQLNCLI.1;Integrated Security=SSPI;Auto Translate=False;"
My understanding is that changing the variable from SERVERA to SERVERB should repoint the connection. (Test to pre-production to production in my current promotion environment.) This should also take effect in any dataflow task using the database connection above right? When I try to repoint the server variable (and only the server variable) I am either a.)throwing errors saying the original connection cannot be found in the data flow task, or b.)the job appears to be processing fine, but the repoint did not take place and data is still flowing to the original server.
Can anyone offer suggestions as to what I am missing?
The properties values in the DB connection:
ConnectionManagerType is OLEDB
DataSourceID is blank
DelayValidation is False (Setting to true changes nothing in my test)
Expression for ConnectionString is (see above)
RetainSameConnection is False
SupportsDTCTTransactions is True (and appears to be unchangeable.)
View 7 Replies
View Related
May 3, 2008
Hi,I need some help. I am getting this error after I complete the asp.net register control and click on the continue button. It crashed when it tries to get it calls this Profile property((string)(this.GetPropertyValue("Address1")));When I look at the stack, it is coming from my ProfileWrapper class which adds user address, city, etc.. from a class which inherits fromSystem.Web.Profile.ProfileBase. From the stack, it is calling the System.Web.Profile and crashed when it tries to open a connection atSystem.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject). I already migrated all aspnet_user, aspnet_roles, etc.. and don't get any connection errors. It is only when I try to get the profile data. This works on my pc, but throws an error on my lunarpage website.Any help is greatly appreciated.Thanks,AJAn error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:Line 100: public virtual string Address2 {Line 101: get {Line 102: return ((string)(this.GetPropertyValue("Address2")));Line 103: }Line 104: set {Source File: c:windowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
oot 021d50639a6858cApp_Code.54nvluyo.1.cs Line: 102Stack Trace:[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +435 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197 System.Web.Profile.SqlProfileProvider.GetPropertyValuesFromDatabase(String userName, SettingsPropertyValueCollection svc) +782 System.Web.Profile.SqlProfileProvider.GetPropertyValues(SettingsContext sc, SettingsPropertyCollection properties) +428 System.Configuration.SettingsBase.GetPropertiesFromProvider(SettingsProvider provider) +404 System.Configuration.SettingsBase.GetPropertyValueByName(String propertyName) +117 System.Configuration.SettingsBase.get_Item(String propertyName) +89 System.Web.Profile.ProfileBase.GetInternal(String propertyName) +36 System.Web.Profile.ProfileBase.get_Item(String propertyName) +68 System.Web.Profile.ProfileBase.GetPropertyValue(String propertyName) +4 ProfileCommon.get_Address2() in c:windowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
oot 021d50639a6858cApp_Code.54nvluyo.1.cs:102 ProfileWrapper..ctor() in d:inetpubvhostsjavcentral.comhttpdocsApp_CodeProfileWrapper.cs:242 ProfileDataSource.GetData() in d:inetpubvhostsjavcentral.comhttpdocsApp_CodeProfileDataSource.cs:17[TargetInvocationException: Exception has been thrown by the target of an invocation.] System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +0 System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +72 System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) +308 System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) +29 System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance) +480 System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1960 System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17 System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149 System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70 System.Web.UI.WebControls.FormView.DataBind() +4 System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82 System.Web.UI.WebControls.FormView.EnsureDataBound() +163 System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69 System.Web.UI.Control.EnsureChildControls() +87 System.Web.UI.Control.FindControl(String id, Int32 pathOffset) +21 System.Web.UI.Control.FindControl(String id) +9 CustomerDetailsEdit.OnPreRender(EventArgs e) in d:inetpubvhostsjavcentral.comhttpdocsUserControlsCustomerDetailsEdit.ascx.cs:60 System.Web.UI.Control.PreRenderRecursiveInternal() +86 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2041
View 1 Replies
View Related
Dec 27, 2007
Hi,
I am working on SQL Server 2005 (x64) with Windows Server 2003 (x64) operating system. I am having a major issue in SSIS. Here is the detailed explanation of the issue :
I have an EXCEL file in 2003 / 2007 version. It contains some data. I want to import the data using SSIS into SQL Server 2005 (x64) database table. I have taken "EXCEL FILE SOURCE" and "SQL Server DESTINATION". It was failed on importing data. Surprisingly it works fine in SQL Server 2005 (x32). Can you please explain why it is NOT woking on (x64) ?
Here is the error code i am getting:
[Excel Source [1]] Error: The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.
Appreciate your time and patience !!
Thanks
View 3 Replies
View Related
Jul 19, 2006
Hi,
I need your help!!!!!!!!!!
Ii'm running the application using the sql SDK version , i'm having trouble openning the connection. my connection string is:
strConnect="data source=DEFAULT_WINXP\VSDOTNET;initial catalog=try1;integrated security=SSPI;persist security info=True;workstation id=DEFAULT_WINXP;packet size=4096";
and i get an exception: Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'DEFAULT_WINXPASPNET'.
this is my code:
string strConnect;
SqlConnection objConnect;
SqlCommand objCommand;
SqlDataAdapter objDatatAdapter;
DataSet objDataSet;
strConnect="data source=DEFAULT_WINXP\VSDOTNET;initial catalog=try1;integrated security=SSPI;persist security info=True;workstation id=DEFAULT_WINXP;packet size=4096";
objConnect = new SqlConnection(strConnect);
objCommand=new SqlCommand();
objDatatAdapter = new SqlDataAdapter();
objDataSet=new DataSet();
objConnect.Open();
objCommand.Connection = objConnect;
objCommand.CommandType = CommandType.Text;
objDatatAdapter.SelectCommand = objCommand;
Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'DEFAULT_WINXPASPNET'.Source Error:
Line 166:objDatatAdapter = new SqlDataAdapter();
Line 167:objDataSet=new DataSet();
Line 168:objConnect.Open();
Line 169:objCommand.Connection = objConnect;
Line 170:objCommand
View 5 Replies
View Related
Jul 21, 2006
Hi
I'm using VB.NET in ASP.NET .
Windows 2000
Visual Studio 2005
and SQLServer 2005.
I'm new to VS 2005
I'm using the following code for connection
<add key="dsnstring" value="persist Security info=False; User ID=; password=;Initial Catalog=TransMate1; Data Source=Localhost trusted_connection=yes" />
it is giving the error as 'Cann't do the connection since user id cann't be null
It is not exact words of the error message.
following code is working fine with the SQL Server 2003 but not with SQL Server 2005.
<add key="dsnstring" value="persist Security info=False; User ID=sa; password=dreams;Initial Catalog=TransMate; Data Source=Localhost" />
Kindly help me
Thanks in advance
Regards.
View 1 Replies
View Related
Aug 8, 2006
I have made an app (the first one) and im trying to find the right connection string to the database. Im using sqlexpress on my local computer, and my host uses MSSQL, can anyone tell me what the connection string could
View 1 Replies
View Related
Sep 28, 2006
any1 know how to find/create a connection string to an SQL database ????
View 3 Replies
View Related
Feb 8, 2007
I want's to use following connection string
"dsn=MyDsn;uid=MyUser;pwd=MyPassword"
Can some how I use it with sqlconnection
I want's to get rid of odbconnection e.t.c
What will be the connection string for sql provider for above dsn information.
If anybody can explain the please help me ?
View 4 Replies
View Related
Apr 13, 2007
my web site is in a host. my mssql db is in other host. how I write the connection string. Please help.
View 6 Replies
View Related
Apr 27, 2007
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
ive got this error and i think its about connection string, help please, can somebody show me how to fix this, obviously im a newbie and this my first time to use .net. thanks!
View 2 Replies
View Related
Jun 11, 2007
hi, i was just wondering what's wrong with my code. i have class library to handle all the classes of my asp.net project. when im compiling a class, i am getting an error "Error 1 The name 'ConfigurationManager' does not exist in the current context " . i have this code for that error message: string connStr = ConfigurationManager.ConnectionStrings["ConnString"].ConnectionString; im not sure about this because im new in asp.net. am i missing a reference here?if yes, what namespace should i include? by the way, i tested this directly in my asp.net age and it is working fine. when i use visual c#.net, that's where the error prompts me, and i cant build that class library.
View 2 Replies
View Related