Connection To The Server Was Reset Server Not Currently Accepting Connections

Jul 19, 2007

Hi there,



This is probably a really obvious question but I have been struggling with answering it for about two days now. (I may even be in the wrong forum) I work in a company with an internal network set up. I have been trying to connect to our website via FTP and it has worked ... well it did in the beginning. I think the server that our website is hosted on is a Unix server - this is a guess from reading the FTP transcripts of the various programs I've downloaded and tried out in an attempt to connect to it.



What happened:

I was working on an .ASP page in Dreamweaver, hit save without thinking, realised I wanted to make a few additional changes before uploading it onto the server, cancelled the transaction and voila. I haven't been able to connect to the remote server since.



Depending on the FTP program that I am using, I get a connection error along these lines:

- "Connection to the server was reset" "The server may temporarily be down or unavailable or not accepting connections"



I am a big newbie at this. I have turned off the windows firewall and tried turning on and off passive IP. I can connect from home but not from inside the building which has me think this has to do with a stray setting somewhere. My housemate suggested I try using the "telnet" command from DOS and see can I get any sort of connection from work. If I can't, he said, it's probably a firewall on the internal network itself.



Any other suggestions?



Help would be welcome!



Thanks.



Quizzy

View 1 Replies


ADVERTISEMENT

SQL Server Isnt Accepting Remote Connections??

Jan 7, 2008

What does this mean and how can I fix this?

View 1 Replies View Related

An Error Has Occurred While Establishing A Connection To The Server. When Connecting To SQL Server 2005, This Failure May Be Caused By The Fact That Under The Default Settings SQL Server Does Not Allow Remote Connections.

Jan 22, 2008

My site works fine in VWD2008 express, but I get this error when I try to use it on my live website.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. 
According to this article: http://support.microsoft.com/kb/914277  I am supposed to:




1.
Click Start, point to Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Surface Area Configuration.
Ok, there is no such program in this folder.  The only thing in there is "SQL Server Error and Usage Reporting"...
 The other thing I am greatly concerned with is this:  All is want is for my webpages to be able to access my database for user authentication.  I DO NOT want to grant the internet rights to remote connect to my database.
 
 
 
 

View 4 Replies View Related

FTP Connection - The Connection With The Server Was Reset

Sep 28, 2007

I'm having trouble receiving a file via FTP. I've done this before, so I'm surprised how much trouble I'm having. I'm getting the error:

[Connection manager "FTP Connection"] Error: An error occurred in the requested FTP operation. Detailed error description: The connection with the server was reset .

I've tried to FTP via Internet Explorer 6, and it works fine. I've tried going into the "FTP Connection" and putting in the password, and clicking "test connection"... works fine again.

Any ideas for me to troubleshoot? I've shut down the package and re-opened it, but to no avail.

View 3 Replies View Related

An Error Has Occurred While Establishing A Connection To The Server. When Connecting To SQL Server 2005, This Failure May Be Caused By The Fact That Under The Default Settings SQL Server Does Not Allow Remote Connections. (provider: SQL Network Interfa

Dec 10, 2007

I get the following error and have been trying to figure out why I keep getting it.  Initially, I had placed my project under wwwroot folder and ran it under IIS and it gave this error.  Then I moved it to my local C drive and same thing.  I am sharing this project with two other co-workers and all our config files and code files are same...they don't get this error but I do.  I checked that SQL Server Client Network Utility has TCP/IP and the 'Named Pipes' enabled.  I thought maybe I have setting in the Visual Studio 2005 that I'm not aware of that's causing this problem...it can't be the server since my co-workers aren't having this error and can't be anything in the code since all of us are sharing this project through vss.  I dont' think using different version of .net framework can create this error.  I changed the version from 2.0 to use 1.1x and it gave same error... Any help would be greatly appreciated.  Thanks in advance.
 
Server Error in '/RBOdev' Application.


An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:



An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:



[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.GetConnectionHolder() +16
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.LoadPersonalizationBlobs(WebPartManager webPartManager, String path, String userName, Byte[]& sharedDataBlob, Byte[]& userDataBlob) +195
System.Web.UI.WebControls.WebParts.PersonalizationProvider.LoadPersonalizationState(WebPartManager webPartManager, Boolean ignoreCurrentUser) +95
System.Web.UI.WebControls.WebParts.WebPartPersonalization.Load() +105
System.Web.UI.WebControls.WebParts.WebPartManager.OnInit(EventArgs e) +497
System.Web.UI.Control.InitRecursive(Control namingContainer) +321
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +692



Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832

View 3 Replies View Related

An Error Has Occurred While Establishing A Connection To The Server. When Connecting To SQL Server 2005, This Failure May Be Caused By The Fact That Under The Default Settings SQL Server Does Not Allow Remote Connections. (provider: Named Pipes Provide

Jan 24, 2008

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,

View 2 Replies View Related

An Error Has Occurred While Establishing A Connection To The Server. When Connecting To SQL Server 2005, This Failure May Be Caused By The Fact That Under The Default Settings SQL Server Does Not Allow Remote Connections. (provider: Named Pipes Provide

Apr 10, 2008

Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.  

View 1 Replies View Related

SQL Server, Connection Pool And Connections Remaining.

Dec 19, 2003

Hi

I have seen the threads already in here about connections and SQL Server but I too am having a connection pool problem.

I am explicitly making a connection, creating a command object, executing a datareader then closing the command and then disposing the connection. The connection just prior to the dispose is definately closed.

However when I do an sp_who in SQL Server the connection is still listed. I have a connection timeout of 30 seconds, so I am considering reducing this to 5 seconds but dont wish to. So therefore when a process is called repeatedly instead of using an existing connection in the pool, it thinks that this connection is still active and therefore creates a new connection. Because all of this is in an ascx, I cant code for one connection to stay open for all 30 instances of the control.

This is a problem because I am creating controls at run time and using page.databind and at that point, I exceed the connection pool and therefore the site crashes out to the "SQL Server Timeout" error.

Anyone else seen this?

View 1 Replies View Related

Default Settings SQL Server Does Not Allow Remote Connections. (provider: Named Pipes Provider, Error: 40 - Could Not Open A Connection To SQL Server

Jan 28, 2008

Hi I always get good reply from u all, thank you,
 I have copied my asp.net website from one server to another. they administrator made necessary modification on IIS manager . and able to see the website on browser. but now i can't loging to system using old password.
I tryed to create new password then also it gives error
System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Here I have used asp.net login control and membership class. Do I need to make nay changes in code.
I have already modified server name in connection string in web config file.
any one can say what is the problem and how to solve this.
thanks
Pat
 
 

View 1 Replies View Related

How To Explicitly Allocate An Sql Server Connection From The Connections Pool

Feb 21, 2008

Hello.

I have a db dal containing the following code:


SqlCommand cmd = new SqlCommand();

cmd.Connection = dbc;

cmd.CommandType = CommandType.StoredProcedure;

cmd.CommandText = "SOME STORED PROCEDURE";
.
.
.
declare some SqlParameters
.
.
.



dbc.Open();

cmd.ExecuteNonQuery();

dbc.Close();

This code, when concurrently running via several threads, yields the following exception:
"The connection was not closed. The connection's current state is open."


My questions are:
1. Why don't .Net allocate another connection from the pool (I try to only concurrently run 2 threads while there are 25 connections in the connection pool) ?
2. How can one explicitly allocate a connection?
3. How do you suggest to solve this problem without a mutex/monitor etc' on the 3 bold lines above and without BeginExequteNonQuery()?







Thank you !






View 2 Replies View Related

This Failure May Be Caused By The Fact That Under The Default Settings SQL Server Does Not Allow Remote Connections. (provider: Named Pipes Provider, Error: 40 - Could Not Open A Connection To SQL Server)

Apr 18, 2008

Hi ,
      I am struck with one issue.Plz help me out if you have any solution for this one.
Details
Front End - Visual Studio 2005
Back End -SQL Server 2000 (Remote database) 
Error i am getting is
{System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
   at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)   at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup)   at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)   at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)   at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)   at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)   at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)   at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)   at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)   at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)   at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)   at System.Data.SqlClient.SqlConnection.Open()   at dbcAccess.clsSQL.GetConnect() in C:Documents and SettingskerlsgMy DocumentsVisual Studio 2005ProjectsdbcAccessdbcAccessclsSQL.cs:line 296} 
 
 
 
   
 
{System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)

View 6 Replies View Related

Console Data Connection Problem: Sql Server Doesn't Allow Remote Connections

Apr 3, 2008

Hello
 I have VS 05 professional connected to SQL server express. I am trying to make a simple console  connection  to northwind database  to show the results of a simple procedure.
The code is as follows:
 
using System;
using System.Data;
using System.Data.SqlClient;namespace Chapter6
{
class CallSp1
{static void Main()
{
// create connection
SqlConnection conn = new SqlConnection(@"server = .centrinosqlexpress;
integrated security = true;
database = northwind");
try
{
// open connection
conn.Open();
// create command
SqlCommand cmd = conn.CreateCommand();// specify stored procedure to executecmd.CommandType = CommandType.StoredProcedure;
cmd.CommandText = "sp_select_employees_details";
// execute command
SqlDataReader rdr = cmd.ExecuteReader();
// process the result setwhile (rdr.Read())
{Console.WriteLine("{0} {1} {2}",rdr[0].ToString().PadRight(5),rdr[1].ToString(),rdr[2].ToString());
}
rdr.Close();
}catch (SqlException ex)
{Console.WriteLine(ex.ToString());
}
finally
{
conn.Close();
}
}
}
}
 
The build indicates no errors but the dos output gives the following error:
 
 Error: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does notallow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)   at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)   at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, BooleantrustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup)   at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)   at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)   at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)   at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)   at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)   at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)   at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)   at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)   at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)   at System.Data.SqlClient.SqlConnection.Open()   at Chapter10.ConnectionSql.Main(String[] args) in D:PROG_DEVVb.NET_devConsoleAppconnectVerifyAppconnectVerifyAppProgram.cs:line 18Connection closed.Press any key to continue . . .
BOTH THE CLENT AND DATABASE IS ON SAME MACHINE.
THE DATABSE IS centrinosqlexpress as shown in the code.
I
 
 
 

View 2 Replies View Related

SQL Express - When Connecting To SQL Server 2005, This Failure May Be Caused By The Fact That Under The Default Settings SQL Server Does Not Allow Remote Connections. (provider: Named Pipes Provider, Error: 40 - Could Not Open A Connection To SQL Serve

Apr 10, 2008

Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.  

View 3 Replies View Related

SQL Server 2014 :: OFFSET Is Not Accepting Start Index?

Aug 7, 2015

I have following simple code in my stored proc. even I have hard coded OFFSET to non zero, but it always return result from starting point 0. End limit "Fetch Next" is working perfect.Only problem is with start.

SELECT
*
FROM #invoices
ORDER BY #invoices.InvoiceDateTime ASC
OFFSET @StartRow ROWS Fetch NEXT @EndRow ROWS ONLY;

View 9 Replies View Related

SQL Server Admin 2014 :: How To Close Active Connections Or Create Connection Timeouts

Dec 9, 2014

we have roughly 22 people connected to one database. But after a while, their applications begin to drag due to in and out communication with the server. When i check the active connections on the sql server, some times i see 157 active connections, please how to i set a timeout or connection interval close, so as reduce the heavy load being put on the server. Or how can i automatically close connections when they get higher than 50 connections.

This settings should be sql server 2008 related.

View 5 Replies View Related

Connection Pooling, Connection Reset On .NET 2.0 SP1

Mar 26, 2008

Hi,

I posted the long version of this over on the ADO.NET framework group:
http://groups.google.com/group/microsoft.public.dotnet.framework.adonet/browse_thread/thread/51597180ec77f543/70e804505c2df829#70e804505c2df829

The short version is:

In .NET 2.0 SP1, Microsoft have deprecated the "Reset Connection" connection string API which, when set to false, stops connection pooling from calling "sp_reset_connection" on connections drawn from the pool. We need this for our DB security: we "EXECUTE AS" on connection open and since we cannot tell when it will close (passed to 3rd parties and there is no useful "closing" event), we must "REVERT" the connection next time it is drawn from pool e.g. OPENS. We must do the revert before sp_reset_connection is called or SQL Server kills the connection (security violation) - we accomplish this by keeping track of connections' SPIDs. We implemented this using EL DAAB + custom SQL provider which handled connection open event. Now it is entirely broken!

This all worked fine in .NET 2.0 RTM when we could control when sp_reset_connection was called (could delay until after revert). Now I've run out of options and will have to rewrite the entire security infrastructure. What I'd really like is a decent "closing" event on SqlConnection (statechanged will fire after close - too late!). As I asked in the full post above.. how are we expected to build scalable apps with the features that Microsoft tell us to use when they don't work together?

How can I REVERT my connection before it is sent back to the pool?

If any of this isn't clear, please see above linked post.


Many thanks,

Simon

View 1 Replies View Related

Connection Reset

Mar 23, 2007

Hi all

I have build an application on top of SQL Server 2005 and i am using microsoft driver. My application stops periodically becoz of Database Connection Loss and I get the following exception


com.microsoft.sqlserver.jdbc.SQLServerException: An exception occurred during the DBComms.transmit operation. Exception:Socket closed. Context:(5) [Thread[Thread-55,5,main], IO:7e2dc, Dbc:null].
10:06:14:703 AM at com.microsoft.sqlserver.jdbc.SQLServerException.ma keFromDriverError(Unknown Source)
10:06:14:703 AM at com.microsoft.sqlserver.jdbc.DBComms.transmit(Unkn own Source)
10:06:14:703 AM at com.microsoft.sqlserver.jdbc.IOBuffer.sendCommand( Unknown Source)
10:06:14:703 AM at com.microsoft.sqlserver.jdbc.SQLServerStatement.se ndExecute(Unknown Source)
10:06:14:703 AM at com.microsoft.sqlserver.jdbc.SQLServerStatement.do ExecuteQuery(Unknown Source)
10:06:14:703 AM at com.microsoft.sqlserver.jdbc.SQLServerPreparedStat ement.executeQuery(Unknown Source)

Unable to find the exact reason for the above problem. Pl advice

Thanks & Rgds
Roshini

View 1 Replies View Related

Connection Reset Error Using JDBC

Jun 20, 2007

I see the following error randomly -



* SQLException during execution of sql-statement:
* sql statement was 'SELECT count(*) FROM PRODUCT_ATTRIBUTES A0 WHERE A0.PRODUCT_ID = ?'
* Exception message is [An exception occurred during the DBComms.receive method. Operation:Connection reset. Context1) [Thread[pool-2-thread-1,5,main],

IO:18563, Dbc:c67b9]. PktNum:0. TotalReceived:0. PktSize:4,096.]
* Vendor error code [0]
* SQL state code [08S01]
* The root stack trace is -->
* com.microsoft.sqlserver.jdbc.SQLServerException: An exception occurred during the DBComms.receive method. Operation:Connection reset. Context1)

[Thread[pool-2-thread-1,5,main], IO:18563, Dbc:c67b9]. PktNum:0. TotalReceived:0. PktSize:4,096.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
at com.microsoft.sqlserver.jdbc.DBComms.receive(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.doExecutePreparedStatement(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement$PreparedStatementExecutionRequest.executeStatement(Unknown Source)
at com.microsoft.sqlserver.jdbc.CancelableRequest.execute(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeRequest(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.executeQuery(Unknown Source)
at org.apache.commons.dbcp.DelegatingPreparedStatement.executeQuery(DelegatingPreparedStatement.java:93)
at org.apache.commons.dbcp.DelegatingPreparedStatement.executeQuery(DelegatingPreparedStatement.java:93)
at org.apache.ojb.broker.accesslayer.JdbcAccessImpl.executeQuery(JdbcAccessImpl.java:293)
at org.apache.ojb.broker.accesslayer.RsQueryObject.performQuery(RsQueryObject.java:72)
at org.apache.ojb.broker.accesslayer.RsIterator.<init>(RsIterator.java:189)
at org.apache.ojb.broker.accesslayer.ReportQueryRsIterator.<init>(ReportQueryRsIterator.java:45)
at org.apache.ojb.broker.core.ReportRsIteratorFactoryImpl.createRsIterator(ReportRsIteratorFactoryImpl.java:59)
at org.apache.ojb.broker.core.PersistenceBrokerImpl.getRsIteratorFromQuery(PersistenceBrokerImpl.java:2217)
at org.apache.ojb.broker.core.PersistenceBrokerImpl.getReportQueryIteratorFromQuery(PersistenceBrokerImpl.java:2252)
at org.apache.ojb.broker.core.PersistenceBrokerImpl.getReportQueryIteratorByQuery(PersistenceBrokerImpl.java:2177)
at org.apache.ojb.broker.core.PersistenceBrokerImpl.getCount(PersistenceBrokerImpl.java:2148)
at org.apache.ojb.broker.core.DelegatingPersistenceBroker.getCount(DelegatingPersistenceBroker.java:383)
at org.apache.ojb.broker.core.DelegatingPersistenceBroker.getCount(DelegatingPersistenceBroker.java:383)
at org.apache.ojb.broker.core.DelegatingPersistenceBroker.getCount(DelegatingPersistenceBroker.java:383)
at org.apache.ojb.broker.core.proxy.CollectionProxyDefaultImpl.loadSize(CollectionProxyDefaultImpl.java:154)
at org.apache.ojb.broker.core.proxy.CollectionProxyDefaultImpl.size(CollectionProxyDefaultImpl.java:268)
at com.serus.common.caching.FlyWeight.getCollection(FlyWeight.java:272)
at com.serus.common.caching.FlyWeight.intercept(FlyWeight.java:125)
at com.serus.dto.core.ProductDTO$$EnhancerByCGLIB$$52ef9193.getProductAttributes(<generated>)
at com.serus.manager.scm.ModelManager.getProductAttributeForProductIdAttributeName(ModelManager.java:1664)
at com.serus.inca.outbound.PNAdapter.processTemplate6_New(PNAdapter.java:910)
at com.serus.inca.outbound.PNAdapter.runChildAdapter(PNAdapter.java:144)
at com.serus.inca.outbound.WSBaseAdapter.runAdapter(WSBaseAdapter.java:114)
at com.serus.inca.outbound.WorkstreamProcessor.startProcessor(WorkstreamProcessor.java:375)
at com.serus.inca.outbound.WorkstreamProcessor.call(WorkstreamProcessor.java:152)
at com.serus.inca.outbound.WorkstreamProcessor.call(WorkstreamProcessor.java:78)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:269)
at java.util.concurrent.FutureTask.run(FutureTask.java:123)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:650)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:675)
at java.lang.Thread.run(Thread.java:595)


My database and driver details are as below:



Database Product Version 9.00.1399

Driver Name Microsoft SQL Server 2005 JDBC Driver

Driver Version 1.1.1501.101

Driver Major Version 1

Driver Minor Version 1



It is a AMD 64 bit 2 dual core machine which is deployed with jdk 1.5 update 10.



Has anyone seen this before?



Thanks

-giriraj

View 12 Replies View Related

Automatically Reset SQL Server

Mar 4, 2008

Hi all,
I am wondering if there is a way that the SQL server resets every few hours. I am using an application which is heavily utilising SQL server and the server crashes every now and then. I can reset it manually but I was wondering if there is a way that it detects the crash and reset itself automatically. Thanks a million in advance.

View 2 Replies View Related

Connection String Has To Be Reset Every Time When DTS Package Is Started

Mar 31, 2006

Hi All,

I am trying to import data from flat file to sql server 2005 DB table using SSIS. There are 4 different text files in the input folder. I am using for loop to iterate reading and importing 4 times. In order to do this I have set "Connection String" property of a connection manager to a package level variable using expression. There is a script which supplies the source file name and assigns to this variable.

The package works fine. The data gets imported successfully into the destination table. However, when I close the package, reopen it and then run, the Data Flow task fails with the error "Can not open the source file". If I enter a valid file name in the Flat File Source task and run the package it works again. As soon as I close the file/package, reopen and then run, the data flow task fails with the same error.



How do I make this working. I am planning to schedule a job which will execute the package programatically. In that case no user intevention is possible.

I would appreciate your help on this. I can provide further details if required.

-SGK



View 13 Replies View Related

How To Reset Default DB In SQL Server Express

Mar 11, 2008

How can I reset the default DB in SQL server management studio express? I am really frustrated with this...thanks for any help.

View 2 Replies View Related

Reset Sa Password Msde (sql Server 7)

Sep 25, 2006

Hi Guys,We've lost the password for the sa. No other users belong to the admingroup. I've tried logging in using osql -E (windows authentication)without success. Is there anyway to reset the sa password? The databaseis MSDE and the version seems to be 7 (sql server 7 folder on pc). Itis running on Windows 2000 professional.Any help would be greatlyappreciated.Regards,Eddie

View 2 Replies View Related

SQL Server Mobile - Reset Increment

Sep 4, 2006

I can't seem to find a way to reset the auto increment fields in my SQL Server Mobile database table.

Are there any SQL statements I can call in order to do this?

I'd rather not have to drop and then re-create the database.

Any help much appreciated

View 8 Replies View Related

Does Anyone Have A Script To Reset All Logins On A Server?

Apr 13, 2006

We want to merge 2 SQL servers into one. This means we will have duplicate logins with differing passwords.

We want to reset all the passwords on one server to something memorable. Does anyone have a script that cursor through (or trans - I'm not shy) all the logins in a mster db? I really don't fance going through hundreds of logins changing their passwords by hand!

View 1 Replies View Related

Applying The Snapshot For Merge Rep Fails Everytime Because Connection Is Reset?

May 14, 2007

Hi guys, Im desperately hoping someone here can help me. Ive been trying to set up merge replication between 2 servers all weekend and it keeps failing. Im setting this up as follows
The Publisher/Distributor is a SQL Server 2005 machine, the database being replicated is 4gb, and the only subscriber is a SQL Server 2000 SP4 machine. I set up my publication normally, and set up the push subscription, adn set it to initialize immediately. It weill then start bulk copying and go on for about 3-4 hours before it fails and gives me the errors:

Error messages:
The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147201001)
Get help: http://help/MSSQL_REPL-2147201001
The process could not bulk copy into table '"dbo"."CONTENT"'. (Source: MSSQL_REPL, Error number: MSSQL_REPL20037)
Get help: http://help/MSSQL_REPL20037
An existing connection was forcibly closed by the remote host. (Source: MSSQLServer, Error number: 0)
Get help: http://help/0
One or more BLOB columns could not be sent to the server, attempt to recover from the problem failed. (Source: MSSQLServer, Error number: 0)
Get help: http://help/0
Communication link failure (Source: MSSQLServer, Error number: 0)
Get help: http://help/0
Unspecified error (Source: MSSQLServer, Error number: 0)
Get help: http://help/0
Failed to send batch after max errors (Source: MSSQLServer, Error number: 0)




This is driving me crazy as I havent slept in ages trying to get this fixed. Anyone have any idea whats going on? Its always one of 2 tables so far that keep failing, ContactLog and Content, what can I do?

View 3 Replies View Related

SQL 2012 :: Reset For Connection Pooling VS Login Failed For User XXXX

Aug 5, 2015

We are facing issue on one of our databases on Availability Group replica. FYI, please refer the below messages we are receiving. Moreover, the errors don't happen consistently for the specified user.

The client was unable to reuse a session with SPID 420, which had been reset for connection pooling. The failure ID is 46. This error may have been caused by an earlier operation failing. Check the error logs for failed operations immediately before this error message.

Error: 18456, Severity: 14, State: 46.
Error: 18056, Severity: 20, State: 46.

Login failed for user 'XXXX'. Reason: Failed to open the database 'YYYY' configured in the login object while revalidating the login on the connection. [CLIENT: aa.bb.cc.nn]

View 0 Replies View Related

SQL Server 2012 :: Reset Running Total To X Amount

Dec 22, 2014

I need to calculate running total which resets when reached to 16, and also needs to calculate remaining amount as paid.

I have attached sample data, so we have two columns Earned, and Used. And we need to calculate Balance, and Paid columns.

View 4 Replies View Related

SQL 2012 :: Reset Admin Password Without Reinstalling Server

Jun 17, 2015

I have a local instance of SQL 2012 express,

Somehow my admin privileges have been lost, and the sa password is not Password123.

Is there anyway to reset this password without re-installing SQL server.

View 1 Replies View Related

When Connecting To SQL Server 2005, This Failure May Be Caused By The Fact That Under The Default Settings SQL Server Does Not Allow Remote Connections

Jan 22, 2008

When my default.aspx page loads I get this error for the connection to my SQL 2005 DB.    An error has occurred while establishing a connection to the server.
 When connecting to SQL Server 2005, this failure may be caused by the fact that
under the default settings SQL Server does not allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL
Server) I have already gone to Surface Area Configuration to ensure that Remoting with both Named Pipes or TCP/IP is enabled and it's set to both for remoting.I verified that my local account has access to the DB.Not sure what else to check. 

View 8 Replies View Related

How Do I Configure My Isa Server In Sbs 2003 To Allow Remote Connections For Sql Server 2005

Apr 19, 2008



hi,

could anyone guide me on how to allow, ceate rule for sql server 2005 remote connections to work. i already configured my sql server to allow remote connections and also my router, it is only in isa that is blocking the connections.


thanks

View 1 Replies View Related

Connections To SQL Server Files (*.mdf) Require SQL Server Express 2005

Nov 4, 2005

When ever I click on an MDF file in VS2005 I get the following message.

View 53 Replies View Related

SQL Server 2012 :: Running Sum With Reset Option And BULK Update

Jul 22, 2015

I have come up with an issue where I want to update data in a table using bulk/SET update to get the result shown in below code with output in column titled "Arrear Amt".

Please use this test data.

CREATE TABLE ##vOD_Calc
(
Seq_No INT ,
Contract_id INT ,
Rental_id INT ,
Actual_OD INT ,
Logic_OD INT ,
Due_dte DATETIME ,

[Code] .....

Logic required is that once the sum of column [ArrearAmt] of current row and all previous rows becomes greater than $100 then column [ChArrrearAmt] should show that summed up value and in else case the column [ChArrrearAmt] should show the same value as that of column [ArrearAmt].

Once the column [ChArrrearAmt] reaches the threshold of $100 then the same cycle should start again i.e. in above example rental#1 had $37.17 < $100 then rental#1 + rental#2 is also < $100 and at rental#3 sum of rental#1, rental#2 and rental#3 becomes $111.51 which is greater than $100 so its updated in column [CHArrrearAmt]. The same cycle start overs from rental#4 onwards however the summation of [ArrearAmt] will now begin after rental#4 onwards and not from the starting.

Below is the loop based SQL script which handles the above situation, however in BULK its a total deterioration of performance if thousands of rows are to be processed i.e. with a contract having multiple rentals.

The case here is that I have to use the result of previously updated column value of [ChArrrearAmt] to take decision for the next row, however with BULK update since the row is not yet updated with latest amount therefore the decision on next row is also giving wrong result.

This is the code with which I have achieved to update the column 'chArrear Amount', however its a loop based solution and performance killer.

INSERT INTO ##vOD_Calc_loop
( Rows_count ,
contract_id
)
SELECT COUNT(*) ,
T.Contract_id
FROM ##vOD_Calc T
GROUP BY T.Contract_id

[Code] ....

View 4 Replies View Related

Maximizing User Connections Sql Server 2000 Vs Sql Server 7

Nov 1, 2000

What are the maximum number of user connections achievable for sql server 2000 (w/ win 2000 adv server), and how are they managed - compared with sql server 7.0 (w/ win nt 4.0)? Our group is looking at upgrading our dbase server from sql server 7.0 to sql server 2000.

HELP

Thanks in advance

Gunnar
gunnardl@yahoo.com

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved