Hi,
I am developing an SSIS package and need the execution of the package to continue even if one of the tasks within the package fails. I have an OnError event handler for this task which fires when it fails but want the rest of the package to continue.
Any suggestions greatly appreciated.
Thanks
We have a package that loads the data from several excel files into database in a forloop.
Everything works files until the package hits the bad file.
My goal is to continue the loop to process the rest of the files by skipping the bad file and error. In each task OnError I am creating custom error message to send an error/ sucess summary email out at end of the process.
How can force the for loop to continue when there is an error?
Is there any way to reset the errors?
Thanks
R
Hi,
I need to make my package check a variable value at the begining of the execution and depending on the value of that variable it decides either to continue or stop the package execution. How can i do that?
thanks,
Aref
I use a execute package task to run a child package in which I run some sql task.
as the error handle I insert a script task and link a line from execute package task to script task
of course the line is red,
but I found when the child package failed, the execute package task turns red,it stopped
the script task can't be run, I don't konw why?
This task or container has failed, but because FailPackageOnFailure property is FALSE, the package will continue. This warning is posted when the SaveCheckpoints property of the package is set to TRUE and the task or container fails.
I have just spotted the message above in one of my log files.
I've never noticed it before. Is it new in SP1? I'm guessing it must be.
If so - good job. This is a very important addition because the behaviour of checkpoints without setting FailPackageOnFailure=TRUE is not intuitive (in my opinion).
-Jamie
Hi,
We are using SSIS to load some 100k records from flat file to Oracle Destination. We are using Oracle 10g client.
But during the execution after some 5hrs or 6hr with 900k records upload we are getting the message Package execution completed. In the Execution results there is no message related to success or failure and the tasks in the Data Flow where yellow in color. What might be the problem? Any information regarding this case will be helpful for us.
Regards,
Roopa.
hello to every body.. well i have a problem.. well i created a package the task of which is to update thedimensions and the fact tables from the tables of source.
i created a configuration file with all the parameters that are nedded (connections managers; parameters of packages).this config file will include all the paremeters need for the execution of other packages
In that package i call an other package (execution package task). this package normally will take the parameters of the parent package isn't it??(i put the parameters of this package to the config file of the parent package).
i must also note that for the second package called there is also a package...
i must also note that i have 2 DWHs (a and b) for testing.
the problem is that when i execute the parent package to DWH b , the sacond package called do not take the parameters of the parent package. instaed it looks to its XML configuration file(in a different location of the config file of the parent package) which contains the connection parameters to DWH a and it calls strored procedures from the DWH a (instead of calling at SP from DHW b).
any ideas??
thnx a LOT0
I've searched everywhere for this but can't find the answerI want to run a DTS package that simply executes a SQL statement to geta count of rows in a table, if the resulting number is greater thanzero I want to execute another step in the same package, else justquit.I don't to pass global vars from one package to anotherHow can I do this?Any help would be great
View 1 Replies View Relatedi have a package that contains a foreach loop container, in this container i have sql tasks, and execute package tasks, that end with a send mail task. if there something wrong with the smtp server, or it's down, the send mail task fails the package.
i don't want this to happen, what i want that if the send mail taks fails, the package will continue it's execution.
--i thought of using the event handler... but i don't know if it works...
thank you for any help!!!
In my package i have to loop through files and load the data from files into a table.
but if a file has error i need to move it to a folder like errored and continue execution with other files.
I have scheduled a SSIS package to run repeatedly by creating a scheduled SQL job that runs every minute . After every hour the packgae fails with the following error
Description: System.OutOfMemoryException: Insufficient memory to continue the execution of the program. at Microsoft.SqlServer.Dts.Pipeline.Wrapper.IDTSCustomProperty90.get_Value() at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.CreateUserComponent() End Erro
The strange thing is that if i right click on SQL JOb and run it...it works fine.
Did anyone encounter similar problem or know the solution of the above problem ?
Thanks....
Hi
I'm using VS'08, developing in VB.NET, using an SQL'05 DB and a local sync DB (3.5)
When attempting to append a record to the SQL CE DB's local sync'd table I get the error <<Insufficient memory to continue the execution of the program>>, the same record gets appended to the SQL'05 DB without error.
Ideas?
David L.
All,
Is there a way, in SQL Server 6.5, to continue processing within a stored procedure even though an error occurs? An example I am inserting records into a temp table within a stored procedure, and there may be duplicate UNIQUE keys, I simply want the procedure to continue inserting records ignoring the failure.
Thank you,
Scott Kolek
Development Manager
SKM Software
http://www.skm-software.com
Hi,
Received the error message below when we trying to execute an sql file which has insert statments and size of the file is 111mb. Environment - SQL Server 2005 - windows 2003.
Error Message - Insufficient Memory to continue the execution of the program. (mscorlib)
There is any resolution ?. Please advice.
Thanks
GuessMN
Okay, I have a For each loop container that has an enumeration of folder locations. I run a script to filter the files in those folders and prepare them to the next task to be copy. I want the script to "continue" the loop if none of the files meet the criteria. Can someone point me into the right direction? I need some way to advance through the loop when this happens.
Thanks!
Hi all,
I have a simple question: is it possible to use Edit and Continue feature when debugging a script task in VSA?
It seems to me that after breaking the execution of the script task and adding some code in break mode, whole edit disappears after leaving VSA environment.
I have enjoyed the Edit and Continue feature when developing in VBA, so I am wondering if it is available in VSA.
Thank you very much for the answer!
Marek Stefanek
When attempting to save an SSIS package in Visual Studion I receive the following error message detailed below. If I attempt to "Save As" to another location, I then receive an insufficient storage error. The development machine has over 1.5 GB of available physical memory and several GB of disk space availabe to save my 16 MB package. I have checked the event log and have found no related messages in the Application or Server logs.
Any suggestions on how to determine the cause or resolution of this error message would be greatly appreciated.
Failure saving package. (Microsoft Visual Studio)
Insufficient memory to continue the execution of the program. (Microsoft.SqlServer.ManagedDTS)
Advanced Error Message Details
Failure saving package. (Microsoft Visual Studio)
------------------------------
Program Location:
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializePackage(IDesignerSerializationManager manager, Package package, TextWriter textWriter)
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializeComponent(IDesignerSerializationManager manager, IComponent component, Object serializationStream)
at Microsoft.DataWarehouse.Serialization.DesignerComponentSerializer.Serialize(IDesignerSerializationManager manager, Object value)
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.DataWarehouseDesignerLoader.Serialize()
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BaseDesignerLoader.Flush(Boolean forceful)
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BaseDesignerLoader.Flush()
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.DataWarehouseContainerManager.OnBeforeSave(UInt32 docCookie)
===================================
Insufficient memory to continue the execution of the program. (Microsoft.SqlServer.ManagedDTS)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Package.SaveToXML(String& packageXml, IDTSEvents events)
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializePackage(IDesignerSerializationManager manager, Package package, TextWriter textWriter)
I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
Hi,
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
Hi,
I created a package which passes some infornmations( through parameters) to its child package.
I need to do some processing in parent package based on execution status of child package.i.e.
if child fails then some operation and if child succeeds then other operation.
To determine the status of execution of child package I am using two differnt constraint ..one constraint is having value "Success" and other having value "Failure".
My problem is that when child packge is executed successfully the constraint with value = "Success" works properly but when child fails the constraint with value "Failure" does not work.
-Prashant
Hello All,
I have a SSIS Package with a "Execute Package Task" to call a child package. I am trying to have the master/parent package complete its execution regardless the outcome (failure or success) of the child package. The overall structure of the master package is:
1. Perform Pre-load tasks (stored procedure).
2. Execute Package Task (call child package)
3. Perform Post-load Tasks (stored procedure)
I have try everything and cannot get the results that I want... I have tried the combination of "failparentonfailure", "forceexecutionvalue", etc. The master package stops at childs failure. I would like to resume to completion
Any ideas out there?
Rohan
Hi,
I want to know if it's possible to retrieve what kind of error have occurred when the on Failure workflow is execute in a DTS package.
Martin
We are unable to get a file from a VMS FTP site. The specific error message is:
View 5 Replies View RelatedI am having a problem with the scheduled task I am running. There had been an error message 5702 which says "The SQL Server is terminating this process". I don't understand what this means. And if I try to force the job to run, it says that the SQLExecutive service is not running on the particular server. And this prevents the task from being run. But when I try to check for the said service, it is running. I don't know what is happening here. Please help me.
View 1 Replies View Related
Hi all,
I have set up a package that copies data from one server to another server, then delete the data from the source tables. Now I want to add a task where it asks if the copying data was successful, then delete the data, ELSE stop the package and give an error msg, or some kind of a roll back so I don't delete the data without copying it to the destination server.
So what I want to ask is is that possible using Execute SQL task to write the script? if not how do I approach to it?
And I need some help with the roll back script as well..( IF previous task fails ..... ELSE Go on to the next task )
any help is appreciated!
MODERATOR COMMENT: Please don't wipe out your posts.
Hi everyone,
For first time I'm testing this task and surprisingly, when I try "Edit Package" option:
1)The DTS host failed to load or save the package properly
2)The selected package cannot be opened
3)Error HRESULT E_FAIL has been returned from a call to a COM component
But after these messages you can see all the tasks but they haven't name!!
It seem as if RCW mechanism has failed between managed and unmanaged coded-partially.
I don't dare to follow doing more stuff, I don't know if that package is well-loaded or not from there. ?¿
Any guidance or idea about this?
How do I set an On Failure when a Tranform Data Task fails? I'm pulling in a text file and if the set the On Failure for the text file connection it says "Defining precedences between the selected items is not valid", and if I set the On Failure for the database connetion is doesn't execute when the tranform data fails. Any ideas on how capture this error?
View 3 Replies View Relatedi use email task and it dosent send an email at all....this task causes an error..
If i need to set up email for the package if the package fails...
or how should i set in the sql server agent...iknow there is an option there but i dont know how to..
Please let me know...
Hi,
I tried to set up the send Mail Task and got the following message, however can't receive any message:
SSIS package "Package.dtsx" starting.
Error: 0xC002F304 at Send Mail Task, Send Mail Task: An error occurred with the following error message: "Failure sending mail.".
Task failed: Send Mail Task
SSIS package "Package.dtsx" finished: Success.
The program '[3628] Package.dtsx: DTS' has exited with code 0 (0x0).
Can somebody tell me why?
Thanks,
Hello,
When I run my package, a task will fail, however, the package will claim that it was successful. Why is this, and how can I trigger a failed package when one task fails?
Thanks in advance.
Hi,
Is there any way to enforce task execution order within a control flow? I need to have tasks execute after each other, because for example Task B depends on the execution of Task A.
Doesn't the success constraint enforce execution order? When I run my package the tasks seem to execute in a random order which is not what I want.
What I am trying to do is:
Loop through all Xml files in directory
For each Xml file:
For categories, products & fields:
Truncate staging table
Insert data from Xml file into staging table
After all Xml files have been processed then import data from staging to main tables
Here is my control flow:
http://www.myfootballonline.com/flow.png
I have a situation where I'd like to conditionally execute the first task in a package based on the contents of a user variable.
If user variable "Var1" is false I want to begin execution with the first task.
If "Var1" is true I want to begin execution at the second task.
My first thought of course was SequenceContainer, but the same issue would exist for the first task in a SequenceContainer.
Is there a way to do this?
Thanks!
Hi friends,
I have a for each loop that populates from a set of flat files into a Sql Server table, I run the Flat file Import via a dts package embedded into Execute DTS 2000 Task. I want to pass the Sourcefile Name that is fetched by the For Each Loop to assign it Global Variable in DTS. how this can be made ?
Thanks
Subhash Subramanyam