I have a looped query querying linked servers. When it cannot connect to a server, it errors out.
Error Message;
Server: Msg 6, Level 16, State 1, Line 2
Specified SQL server not found.
How can I handle this error message and continue the query?
I have the error above, but no error log. I can preview the sub report - but this main report fails after working this morning. This is for internal company reports and I rebuilt this one after converting from access.
I have looked where the error logs should be, but there are no error logs.
I rebuilt the query as I needed to change this, but this did not help.
Is there someone who could point me in the correct direction.
Thanks!
Terry
I am sync. for the first time (Merge Replication using SQL 2005 and Mobile) and this error keeps poping up on the emulator. I am tring out the tutorial. :) boss on my butt.
Does anyone have any ideas or a solution to this...your help is WELL APPRECIATED ...
Error code: -2147024809
zo
Hiwhen i right click table and click design table then error occured(an unexpected error occured during this operation)If any one knows please let let me know your help would be appreciated .thankspardhi--Message posted via http://www.sqlmonster.com
View 1 Replies View RelatedI am getting the following error.A transport-level error has occurred when sending the request to theserver. (provider: Shared Memory Provider, error: 0 - The system cannotopen the file.)On performing the same operation again, it happens fine without anyerror.Please help.Regards,Shilpa
View 5 Replies View RelatedWe just starting receiving an error when we try to print our reports. "An error occured during printing. (0x800C0005)".
These same reports work fine on my localhost, our build server, and our beta server. This is only happening on our production server.
I have removed the activeX control and reinstalled it. It did not work.
We are ONLY running SSRS 2005. We never ran a BETA version. It was working up until recently.
Please HELP!
Thanks.
Hi,
I have installed SQL 2000 reporting services 2000 SP2.
When i try to print report by clicking print button in HTML tool bar i get error as "Error occured while printing 0x80040005"
I have turned on client print log, but there in no useful information
Regards
Shakeela
we r using the report viewer control of the reporting service 2000 , and it works fine
but when there is a huge report (around 1000 page) it gives the above error "An Error Occured During Printing (0X80070003)" after spoling of around half of the report around 500 page, and stops spoling the rest of the report
is it a problem with the reporting service or the server hardware ?
Hi All,
I am new to sql server 2005.
I tried to connect to reporting services configuration manager.
it gives an error
An Unknown error has occured in WMI provider.
error code 80040219.
so please help me out regarding this issue.
I am new learner of ASP.NET and SQL server.So there might be any mistake in writing code.
When I tried to run my project I got following error.I am uisng SQL 2005 server.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
connection string used is
<add name ="ConnectionString" connectionString="Data Source=BLUESTAR\SQLEXPRESS;Initial Catalog=KnowledgeAssetManagement;Integrated Security=True"/>
I have also tried by setting local & remote connection options from the SQL server surface Area Configuration and connections option from server properties of sql server management studio.
Please help me ,my work get stucked due this problem.
SQL Server has stopped a critical task, with the following error log. I have executed the task again and the same symptons occur.
--
EXCEPTION_ACCESS_VIOLATION raised, attempting to create sympton dump
***BEGIN STACK TRACE***
0x0040DC1A in SQLSERVR.EXE, ubfree() + 0x009A
...
...
--
Has anyone any had a simliar experience or have any suggestions for investigation?
Cheers
Jasper
Hi folks,
I have been trying to figure out how to establish a remote connection to a database on SQL Server 2005, but no matter the approach, I'm met with this result: "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. error:26 - Could not open a connection to SQL Server."
The machine I have the server on is a OS Vista Ultimate, 2 gigs ram, 2.86 GHz processor.
I'm trying to access from another 2 types of machines - both laptops with Vista Ultimate.
I have run the configuration tool on the server machine to allow local and remote connections for the database engine, as well for the browser, but to no avail.
I have the developer version of SQL 2005 installed on all three machines, but don't know if that is a reason for not being able to establish a connection.
I've tried to connect via a test application; also via Visual Studio, and also directly from SQL Server on the machines.
None of the machines can access the database any of the others, regardless of the configuration.
They all display the very same error.
I'm really in need of some help with this, any ideas?
Thanks!
Gary
plz help me...
when establishing a connection to the server. when connecting to server 2005, this failure may be caused by the fact that under the default setting SQL Server does not allow remote connections.(provider: Named pipes provider, error:40 - could not open a connection to sqlserver)
Hi all,
I am getting error message 'An internal consistency error occured sqlstate:42000" when i am trying to restore the database.
Regards,
Shashi.
hi,
I have enabled custom authorization in SQL server 2005 reporting services. If i try to view the reports thru report manager by using the url http://localhost/reports then i'm getting the error message as
"An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help
Get Online Help
The event log file is full"
If i try to view the reports by using reportserver url http://localhost/reportserver then its working fine. Please help me in resolving this issue.
The log file is as follows
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.1399.00</Product>
<Locale>en-US</Locale>
<TimeZone>India Standard Time</TimeZone>
<Path>C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServer__02_06_2007_13_59_07.log</Path>
<SystemName>BLRKEC21139D</SystemName>
<OSName>Microsoft Windows NT 5.1.2600 Service Pack 2</OSName>
<OSVersion>5.1.2600.131072</OSVersion>
</Header>
aspnet_wp!webserver!1!2/6/2007-13:59:07:: i INFO: Reporting Web Server started
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing ConnectionType to '0' as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
aspnet_wp!configmanager!1!2/6/2007-13:59:08:: w WARN: WebServiceAccount is not specified in the config file. Using default: BLRKEC21139DASPNET
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
aspnet_wp!resourceutilities!1!2/6/2007-13:59:08:: i INFO: Reporting Services starting SKU: Developer
aspnet_wp!resourceutilities!1!2/6/2007-13:59:08:: i INFO: Evaluation copy: 0 days left
aspnet_wp!runningjobs!1!2/6/2007-13:59:08:: i INFO: Database Cleanup (Web Service) timer enabled: Next Event: 600 seconds. Cycle: 600 seconds
aspnet_wp!runningjobs!1!2/6/2007-13:59:08:: i INFO: Running Requests Scavenger timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
aspnet_wp!runningjobs!1!2/6/2007-13:59:08:: i INFO: Running Requests DB timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
aspnet_wp!runningjobs!1!2/6/2007-13:59:08:: i INFO: Memory stats update timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
aspnet_wp!library!1!02/06/2007-13:59:08:: i INFO: Catalog SQL Server Edition = Developer
aspnet_wp!webserver!1!02/06/2007-13:59:09:: i INFO: Processed folder '/'
aspnet_wp!library!6!02/06/2007-14:00:02:: i INFO: Call to GetPermissions:/
aspnet_wp!library!6!02/06/2007-14:00:03:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.ComponentModel.Win32Exception: The event log file is full
at System.Diagnostics.EventLog.InternalWriteEvent(UInt32 eventID, UInt16 category, EventLogEntryType type, String[] strings, Byte[] rawData, String currentMachineName)
at System.Diagnostics.EventLog.WriteEntry(String message, EventLogEntryType type, Int32 eventID, Int16 category, Byte[] rawData)
at System.Diagnostics.EventLog.WriteEntry(String source, String message, EventLogEntryType type, Int32 eventID, Int16 category, Byte[] rawData)
at System.Diagnostics.EventLog.WriteEntry(String source, String message, EventLogEntryType type)
at Microsoft.ApplicationBlocks.ExceptionManagement.DefaultPublisher.WriteToLog(String entry, EventLogEntryType type)
at Microsoft.ApplicationBlocks.ExceptionManagement.DefaultPublisher.Publish(Exception exception, NameValueCollection additionalInfo, NameValueCollection configSettings)
at Microsoft.ApplicationBlocks.ExceptionManagement.ExceptionManager.PublishInternalException(Exception exception, NameValueCollection additionalInfo)
at Microsoft.ApplicationBlocks.ExceptionManagement.ExceptionManager.Publish(Exception exception, NameValueCollection additionalInfo)
at Microsoft.ApplicationBlocks.ExceptionManagement.ExceptionManager.Publish(Exception exception)
at Infosys.ReportingServices.CustomAuthorization.Authorization.DeserializeAcl(Byte[] secDesc)
at Infosys.ReportingServices.CustomAuthorization.Authorization.GetPermissions(String userName, IntPtr userToken, SecurityItemType itemType, Byte[] secDesc)
at Microsoft.ReportingServices.Library.Security.GetCatalogItemPermissions(ItemType catItemType, Byte[] secDesc)
at Microsoft.ReportingServices.Library.GetPermissionsAction.GetPermissions(String item, StringCollection& Operations)
--- End of inner exception stack trace ---
aspnet_wp!library!6!02/06/2007-14:00:12:: i INFO: Exception dumped to: C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFiles flags= ReferencedMemory, AllThreads, SendToWatson
aspnet_wp!library!1!02/06/2007-14:03:53:: i INFO: Call to GetPermissions:/
aspnet_wp!library!1!02/06/2007-14:03:53:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.ComponentModel.Win32Exception: The event log file is full
at System.Diagnostics.EventLog.InternalWriteEvent(UInt32 eventID, UInt16 category, EventLogEntryType type, String[] strings, Byte[] rawData, String currentMachineName)
at System.Diagnostics.EventLog.WriteEntry(String message, EventLogEntryType type, Int32 eventID, Int16 category, Byte[] rawData)
at System.Diagnostics.EventLog.WriteEntry(String source, String message, EventLogEntryType type, Int32 eventID, Int16 category, Byte[] rawData)
at System.Diagnostics.EventLog.WriteEntry(String source, String message, EventLogEntryType type)
at Microsoft.ApplicationBlocks.ExceptionManagement.DefaultPublisher.WriteToLog(String entry, EventLogEntryType type)
at Microsoft.ApplicationBlocks.ExceptionManagement.DefaultPublisher.Publish(Exception exception, NameValueCollection additionalInfo, NameValueCollection configSettings)
at Microsoft.ApplicationBlocks.ExceptionManagement.ExceptionManager.PublishInternalException(Exception exception, NameValueCollection additionalInfo)
at Microsoft.ApplicationBlocks.ExceptionManagement.ExceptionManager.Publish(Exception exception, NameValueCollection additionalInfo)
at Microsoft.ApplicationBlocks.ExceptionManagement.ExceptionManager.Publish(Exception exception)
at Infosys.ReportingServices.CustomAuthorization.Authorization.DeserializeAcl(Byte[] secDesc)
at Infosys.ReportingServices.CustomAuthorization.Authorization.GetPermissions(String userName, IntPtr userToken, SecurityItemType itemType, Byte[] secDesc)
at Microsoft.ReportingServices.Library.Security.GetCatalogItemPermissions(ItemType catItemType, Byte[] secDesc)
at Microsoft.ReportingServices.Library.GetPermissionsAction.GetPermissions(String item, StringCollection& Operations)
--- End of inner exception stack trace ---
This is the SQLDumper file
02/05/07 16:10:37, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Input parameters: 4 supplied
02/05/07 16:10:37, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ProcessID = 3308
02/05/07 16:10:37, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ThreadId = 0
02/05/07 16:10:37, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Flags = 0x0
02/05/07 16:10:37, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDumpFlags = 0x0
02/05/07 16:10:37, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, SqlInfoPtr = 0x063C5860
02/05/07 16:10:37, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, DumpDir = <NULL>
02/05/07 16:10:37, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExceptionRecordPtr = 0x00000000
02/05/07 16:10:37, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ContextPtr = 0x00000000
02/05/07 16:10:37, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExtraFile = <NULL>
02/05/07 16:10:37, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, InstanceName = <NULL>
02/05/07 16:10:37, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ServiceName = <NULL>
02/05/07 16:10:37, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 11 not used
02/05/07 16:10:45, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 7 not used
02/05/07 16:10:45, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDump completed: C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesSQLDmpr0001.mdmp
Regards
Uday.
Hi all,
Our application that uses Reporting Services for it's Reports.
On one customers build it appears to keep falling over.
Restarting the server seems to resolve the problem for a short period
and then it happens again.
The exception that is returned to our application is
"An unexpected error occured in report processing. (rsInternalError)"
The customer has sent me the log files from
C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataReporting ServicesLogs
I've tied the time that the issue occurs to this section
w3wp!chunks!1!04/11/2008-10:27:35:: e ERROR: GetChunkPointerAndLength: System.Data.SqlClient.SqlException: Database 'ReportServerTempDB' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
and
w3wp!processing!1!04/11/2008-10:27:35:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: An unexpected error occurred in Report Processing., ;
Info: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: An unexpected error occurred in Report Processing. ---> System.Data.SqlClient.SqlException: Database 'ReportServerTempDB' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
I doubt that the disk is full as our database is sitting on the same drive and presumably the whole system would have stopped working by now.
Any thoughts as to what the problem might be?
We've not seen this before.
Cheers,
Chris
When my production server processing some queries suddenly the SQL Server service crashed and following error was in the error log:
SQL Server Internal Error. Text manager cannot continue with current statement.
The server is running SQL Server 2000 with SP4.
I am really concerned because this is a production sever and there are over 300 users access concurrently.
Please help me to find a solution.
Thanks,
Roshan.
Hi All,I want to catch the next MSSQL error in my SQL code with following continuecalculationsServer: Msg 17, Level 16, State 1, Line 1SQL Server does not exist or access denied.If REMOTE_SERVER_1 is inaccessible (as in (a) below) the executing of SQLwill not continue with (b) - I need the code in (b) to run despite whetherthe previous exec was successful or not - Any ideas?begin transaction(a) exec REMOTE_SERVER_1...bankinsert '1' , '1' , 1 , 0 , 0(b) print @@errorcommit transactionwhere REMOTE_SERVER_1 is link to server created byEXEC sp_addlinkedserver @server = 'REMOTE_SERVER_1', @srvproduct = '',@provider = 'SQLOLEDB', @datasrc = 'MYCOMP1', @catalog = 'mirror2'EXEC sp_addlinkedsrvlogin @rmtsrvname = 'REMOTE_SERVER_1', .....Exec sp_serveroption 'REMOTE_SERVER_1', 'data access', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc out', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'collation compatible', 'true'Any help will be greatly appreciated
View 1 Replies View RelatedHow can I cause my insert statement to skip over (without failing) rowswhere there's a primary key constraint violation?I've got a case where daily I insert >500k rows of daily data, wherethe data is date and time stamped. So, for example, I have an insertstatement with constraint: WHERE date >= '5/20/05' AND date <'5/21/05'. That takes care of one day's data (5/20).However, the next day's data (5/21) will still have some time stampsfrom the previous day. Therefore the statement needs to be somethinglike WHERE date >= '5/20/05' AND date <= '5/21/05'. The 5/20 data isalready loaded but I need to take the 5/21 data which just happens tocontain just a few rows of data marked 5/20 and insert it withoutgenerating a primary key error from all the other 5/20 rows that arealready inserted.-Dave
View 7 Replies View RelatedI have an SSIS package that uses a for each loop to send an order confirmation e-mail. If it does not find an email I need the package to continue after the failure path. The package stops after the failure, but I need it to continue with the next iteration of the for each loop. How can I do this?
View 4 Replies View RelatedI have a sql statement which runs through a reference table to drop columns no longer needed. It works, however if it tries to delete a column that does not exist, it errors out. Is there a way to continue if this error appears(I have the set error routine set up) The question is can I tell it if it is this error to go on, and is "continue" the
right syntax? Below is statement
open dbcursor
fetch next from dbcursor into @tbname,@fldname,@recid
while (@@FETCH_STATUS <> -1)
begin
--set @tbname = 'IMMUNIZATION_MAST_'
--set @fldname = 'cb_other'
set @sql = 'alter table ' + ltrim(@tbname)
set @sql3= ' drop column ' + ltrim(@fldname)
exec(@sql + @sql3)
select @error = @@error
if @error = 5924
begin
CONTINUE?
end
print @error
I have transactional Replication from A to B.
My distribution agent failed becos of a primary key violation error in a table.[i have not included the skip error option].
Then the replication stopped.
The transactions on other tables are also not replicated to B.
IF an error is encountered in one of the tables will the replication stop entirely??.Is there no way for the replication to continue for the rest of the tables..
Pls clarify
Hi!
Imagine this SQL statement:
Code SnippetINSERT INTO B SELECT * FROM A
If one of the insert fails ... don't continue, the statement fail. For example if any field in A violate a constraint in B, the statement fails.
I want that the statement continue if errors occurs, if i lost a number of rows don't matter ... but if i can save or log this row will be great too !!
Is posible? Any way to do it?
Regards.
We have a package that loads the data from several excel files into database in a forloop.
Everything works files until the package hits the bad file.
My goal is to continue the loop to process the rest of the files by skipping the bad file and error. In each task OnError I am creating custom error message to send an error/ sucess summary email out at end of the process.
How can force the for loop to continue when there is an error?
Is there any way to reset the errors?
Thanks
R
How can we continue with the rest of the iterations in ForEach Loop after handle an error.
I Have a dataflow task inside a for-each loop and processing a set of flat files in that. When error occurs in the dataflow task, i moved that particular flat file to another location. But, If an error occurs at first falt file, It moves that flat file to the location i specified and not continue with the next file (The Execution finished at that stage itself afetr the first flat file).
I Set the FailParentonFailue of Dataflow task to TRUE (Since its inside the for loop).
Any thing i have to change ? Or Where i miss the thing.
Hi
I have a CSV file which sometimes contains the odd CSV error, for this reason the odd row throws an error.
If I have a clean CSV file my SSIS package works great, but I am having problems getting the package to continue past the rows in the file that throw errors.
How do I :
Get the package to continue on error, I have tried playing with the Propagate Variable with no joy
Add an Error event, which will capture the error and log it to a SQL table or File Destination?
Any help will be great!
Thank you
I have an SSIS package where I have directed the error output to a Flat File Destination. The issue is that there are some bad entried in a set of log files, where the source file reads on more delimited column than there are actual columns. (As in there are 26 column headers, and one row will have 27 commas, or delimiters.) I am trying to redirect the row output to put the bad rows into a Flat File for debugging purposes. Although, the package is not able to continue past the error. As soon as it hits the bad row, it fails despite the error output.
Any ideas?
Hi There,
If an update in a stored procedure fails/errors (as in (a) below) the procedure will not continue with (b) - I need the code in (b) to run despite whether the previous update was successful or not - Any ideas?
(a) if(@Data2 = 6)
begin
update
SCHEDULE
set
Start_CallBack = getdate()
where
(Block = @Block)
end
(b) WHILE @Block_Count > 0
BEGIN
UPDATE BLOCK SET Status = @Block_Status
END
Any help will be greatly appreciated :)
Hi,
does anybody know this error code? I get that error from a jdbc-connection ocasionally but can't find an explanation. The original message is in German. The number should be ok. The error occures when a transaction is aborted, the jdbc-connection is lost.
'Der Server konnte die Transaktion nicht fortsetzen. Beschreibung: 60000000b8'
Please help,
Many thanks
When attempting to save an SSIS package in Visual Studion I receive the following error message detailed below. If I attempt to "Save As" to another location, I then receive an insufficient storage error. The development machine has over 1.5 GB of available physical memory and several GB of disk space availabe to save my 16 MB package. I have checked the event log and have found no related messages in the Application or Server logs.
Any suggestions on how to determine the cause or resolution of this error message would be greatly appreciated.
Failure saving package. (Microsoft Visual Studio)
Insufficient memory to continue the execution of the program. (Microsoft.SqlServer.ManagedDTS)
Advanced Error Message Details
Failure saving package. (Microsoft Visual Studio)
------------------------------
Program Location:
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializePackage(IDesignerSerializationManager manager, Package package, TextWriter textWriter)
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializeComponent(IDesignerSerializationManager manager, IComponent component, Object serializationStream)
at Microsoft.DataWarehouse.Serialization.DesignerComponentSerializer.Serialize(IDesignerSerializationManager manager, Object value)
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.DataWarehouseDesignerLoader.Serialize()
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BaseDesignerLoader.Flush(Boolean forceful)
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BaseDesignerLoader.Flush()
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.DataWarehouseContainerManager.OnBeforeSave(UInt32 docCookie)
===================================
Insufficient memory to continue the execution of the program. (Microsoft.SqlServer.ManagedDTS)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Package.SaveToXML(String& packageXml, IDTSEvents events)
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializePackage(IDesignerSerializationManager manager, Package package, TextWriter textWriter)
Hello everyone,
I have a package that extracts data from a Flat File. If any errors or truncation occur during the extraction of the input data, the package should fail. All fields that have erroneous values should be reported in the log file.
My Solution:
- I have created a Data Flow Task that contains a Flat File Source Adapter and a dummy destination.
- I have left the default "Error Output" configuration of the Flat File Source adapter, namely if a truncation or an error occur for a certain column, then the reaction is "Fail Component".
Problem:
This configuration gives me only the first erroneous column in the row being processed.
Question:
Is it possible to make the Flat File Source adapter continue parsing the current row before it fails? This way, I would be able to get all the erroneous columns in the row in one shot.
Thanks in advance...
Samar
Dear Friends,
I need to execute a SQL query, inside a dataflow (not in controlFlow) and need the records returned to continue the dataflow... In my case I cant use lookup and OLE DB COmmand and nothing else...
I need to execute a query and need the records for dataflow... with OLE DB command I cant see the fields returned... :-(
How can I do it? Using a script? Can I use a Script Component? That receive 2 parameters for input and give me the fields returned from query as output?
Thanks!!
The environment:
Machine1: IBM Records Manager 4.11(IRM) on top of WebSphere Applicaton Server 5.1.0 running on Windows Server 2003. Sql Server 2000 Client and SQL JDBC Driver with SP3 has been installed.
Machine2: SQL Server 2000 Developer Edition with SP3 is installed - Windows XP. IRM uses this remoteSQL Server database
I could login and do certain task through the web client of IBM Records Manager(IRM). But when I try perform create/edit/delete kind of operations, I get the following error at WebSphere end:
9/13/06 11:39:16:742 IST] 6c9f4838 WSRdbXaResour E DSRA0304E: XAException occurred. XAException contents and details are: The cause is : null.
[9/13/06 11:39:16:742 IST] 6c9f4838 WSRdbXaResour E DSRA0302E: XAException occurred. Error code is: UNKNOWN XA EXCEPTION CODE: 0. Exception is: [IBM][SQLServer JDBC Driver]There is Uncommitted local transaction work. Can't start an XA transaction until the local work has been committed or rolled back.
[9/13/06 11:39:16:757 IST] 6c9f4838 XATransaction E J2CA0027E: An exception occurred while invoking start on an XA Resource Adapter from dataSource recordmanager/jdbc/sqlserver/ds01, within transaction ID {XID: formatId(57415344), gtrid_length(39), bqual_length(28), data(00000000000001dc0000000148c3909b0b45226df78cc013b7f774854a82fdaa7365727665723148c3909b0b45226df78cc013b7f774854a82fdaa0000000105c83d07)}: javax.transaction.xa.XAException: [IBM][SQLServer JDBC Driver]There is Uncommitted local transaction work. Can't start an XA transaction until the local work has been committed or rolled back.
at com.ibm.websphere.jdbcx.base.BaseXAResource.start(Unknown Source)
at com.ibm.ws.rsadapter.spi.WSRdbXaResourceImpl.start(WSRdbXaResourceImpl.java:927)
at com.ibm.ejs.j2c.XATransactionWrapper.start(XATransactionWrapper.java:1267)
at com.ibm.ws.Transaction.JTA.JTAResourceBase.start(JTAResourceBase.java:164)
at com.ibm.ws.Transaction.JTA.RegisteredResources.startRes(RegisteredResources.java:389)
at com.ibm.ws.Transaction.JTA.TransactionImpl.enlistResource(TransactionImpl.java:1903)
at com.ibm.ws.Transaction.JTA.TranManagerSet.enlist(TranManagerSet.java:494)
at com.ibm.ejs.j2c.XATransactionWrapper.enlist(XATransactionWrapper.java:602)
at com.ibm.ejs.j2c.ConnectionEventListener.interactionPending(ConnectionEventListener.java:745)
at com.ibm.ws.rsadapter.spi.WSRdbManagedConnectionImpl.processInteractionPendingEvent(WSRdbManagedConnectionImpl.java:1446)
at com.ibm.ws.rsadapter.jdbc.WSJdbcConnection.beginTransactionIfNecessary(WSJdbcConnection.java:329)
at com.ibm.ws.rsadapter.jdbc.WSJdbcConnection.prepareCall(WSJdbcConnection.java:1342)
at com.ibm.ws.rsadapter.jdbc.WSJdbcConnection.prepareCall(WSJdbcConnection.java:1292)
at com.ibm.gre.engine.dao.sqlserver.UtilitySQLDAO.getExtendedAttributesById(UtilitySQLDAO.java:108)
at com.ibm.gre.engine.ejb.business.fileplandesign.RelationshipDefinitionEJBBean.getListByFPViewID(RelationshipDefinitionEJBBean.java:236)
at com.ibm.gre.engine.ejb.business.fileplandesign.EJSLocalStatelessRelationshipDefinitionEJB_eb4df5e6.getListByFPViewID(EJSLocalStatelessRelationshipDefinitionEJB_eb4df5e6.java:151)
at com.ibm.gre.engine.ejb.facade.FilePlanDesignControllerEJBBean.getRelationshipDefinitionListByFPViewID(FilePlanDesignControllerEJBBean.java:189)
at com.ibm.gre.engine.ejb.facade.EJSRemoteStatefulFilePlanDesignControllerEJB_e23bb402.getRelationshipDefinitionListByFPViewID(EJSRemoteStatefulFilePlanDesignControllerEJB_e23bb402.java:239)
at sun.reflect.GeneratedMethodAccessor122.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code))
at java.lang.reflect.Method.invoke(Method.java(Compiled Code))
at com.ibm.rmi.util.ProxyUtil$4.run(ProxyUtil.java:703)
at java.security.AccessController.doPrivileged(Native Method)
at com.ibm.rmi.util.ProxyUtil.invokeWithClassLoaders(ProxyUtil.java:701)
at com.ibm.CORBA.iiop.ClientDelegate.invoke(ClientDelegate.java:1084)
at $Proxy5.getRelationshipDefinitionListByFPViewID(Unknown Source)
at com.ibm.gre.engine.ejb.facade._FilePlanDesignControllerEJB_Stub.getRelationshipDefinitionListByFPViewID(_FilePlanDesignControllerEJB_Stub.java:745)
at com.ibm.gre.webclient.businesslayer.ejb.EJBCallAdapter.viewRelationshipDefinitionList(EJBCallAdapter.java:3807)
at com.ibm.gre.webclient.fileplandesign.views.actions.ViewEditAction.greExecute(ViewEditAction.java:135)
at com.ibm.gre.webclient.common.CommonAction.greExecute(CommonAction.java:642)
at com.ibm.gre.webclient.common.CommonAction.execute(CommonAction.java:341)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at com.ibm.gre.webclient.security.plugin.SecurityRequestProcessor.process(SecurityRequestProcessor.java:58)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java:110)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java:174)
at com.ibm.ws.webcontainer.servlet.IdleServletState.service(StrictLifecycleServlet.java:313)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java:116)
at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java:283)
at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java:42)
at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java:40)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:974)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:555)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:200)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:119)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:276)
at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
at com.ibm.ws.webcontainer.cache.invocation.CacheableInvocationContext.invoke(CacheableInvocationContext.java:114)
at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:186)
at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:618)
at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:439)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:593)
I followed the instructions from one of the article about Microsoft SQL Server 2005 JDBC Driver 1.0 (Note I'm using Microsoft SQL Server 2000 and this driver is compatible with SQL Server 2000): copy sqljdbc_xa.dll to SQL Binn directory and execute the script xa_install.sql. And XA Transaction is enabled on the SQL Server 2000 running machine.
Even after have finished all the steps I still get the same error.
Pls help me on this problem.
Thanks in advance
N.Yogendran