Continuous Priniting - PDF (MSFT Workaround: Make Sure That Your Report Does Not Use The Subreport Control.)
Nov 6, 2007
I have a report that has one subreport. I am finding that if the entire content of the subreport will not fit within the space remaining on the page that it will not start displaying data from that subreport until the next page of the report, leaving a blank section in the report. I would like it to display as much as possible on the first page and then continue on subsequent pages.
Is there a way?
View 11 Replies
ADVERTISEMENT
Nov 3, 2015
I am trying to create a report with a sub report in Sql Server 2012 using Report Builder Version 3. I can run the subreport without any problems. I read where using a shared connection can cause this error so both the main report and the subreport use a connection that is embedded in my report.
For testing, I created the subreport without a parameter and added it to the main report. When I ran it that way, the report worked and sub report displayed the data. So I know it can read from the database.It seems to only give me this error when I am trying to tie the two reports together using a parameter.
View 2 Replies
View Related
Jul 14, 2015
Using SSRS 2014 and VS2013 rc5.
How do I hide a subreport if the parent report row containing the subreport is a certain value? I am attempting to create a statement with ageing buckets. In the main body of the report I have to display payments and invoices. If the invoice row is blank, I need to hide the row containing the subreport.
First, Is this even possible?
Second, How?
View 10 Replies
View Related
Mar 17, 2008
Can we include a subreport which aslo has another subreport in a master report? (assuming all three reports have parameters too)
Thanks
View 4 Replies
View Related
Nov 29, 2007
Hi:
I have thousands of rows that I have to retrieve for my report. When I run my main report it returns my data as a reasonable time.
When I run my sub report (by its own) again data are returned in reasonable time.
When I build the sub report in my main report it takes forever (I have to stop). Are there any tricks that I can use to make this run faster?
Thank you in advance
Bahram
View 3 Replies
View Related
Aug 29, 2007
Hi,
I have a subreport added to the main report and I want to make this report visible only when the parameter value is met.
Ex, I have a parameter CustName in the main report and want to show the subreport when the custName = xxxxx. There reports are parameter driven not data driven reports.
Any help is greatly appreciated.
Thanks,
Sirisha
View 3 Replies
View Related
Oct 18, 2007
After digging for some time now into the "guts" of SSRS, I am wondering if anyone out there has any ideas which might help me at this point.
I am trying to write an Invoice report.
Each report can have 1 to n invoices on it.
Each invoice can have 1 to n line items (spanning several pages for the larger ones)
Each page must have a fixed header and footer with account and payment information on it (the page header and page footer work OK for this).
And here is the problem. Each invoice must also include 1 to n images at the end of the report. 2 on a page and take up an entire 8.5 by 11 inch page. (spanning many pages when many line items exist)
Since the report already has a page header and footer with the report detail stuffed in a table in the middle of the page (report body), I am stuck.
I have read several posts which talk about having a can-grow container with a subreport in the existing footer, but I can't even come close to getting this to work. My footer would have to take up the entire page and having nothing but a subreport in it.
I can not provide a link to the images in the report, as each report must print in its entirety without user involvement (no drilling down).
I am thinking that my report is too complex for SSRS at this time. I would love to be proven wrong by someone on this forum.
Thanks for any and all replies.
John
View 2 Replies
View Related
Jan 27, 2008
Hi All,
I am placing a Matrix inside the table control for grouping requirements,but when we export the report to the Excel, the contents inside the table cell are ignored. Is there any way to get the full report exported, as per the Requirement.Please help me with this issue.
With Thanks
M.Mahendra
View 5 Replies
View Related
Oct 25, 2007
does any one have and example of how to embedd a flash swf file onto a report.??? Is it possable? any examples would be helpful.
View 1 Replies
View Related
Oct 31, 2007
I am calling my report logo image via http: url
the moment the image is loaded to image control, it is changing its height and width.
how can i make it fixed and the image to be resized appropriately to fit the image control.
Thank you very much, for the help.
View 1 Replies
View Related
Apr 2, 2007
Hi All,
I am having a main report having two subreports, say M1,S1 and S2 respectively.
The issue is S2 normally tend to go beyond one page, for all pages except first page of the of the subreport I am getting the page header and footer blank,
Actually this is not loading the ReportItems that are used in main report but it shows text boxes containing strings for eg . "My Name" and date functions eg Today()
Any Solution?
Thanks and Regards
Pragash
View 1 Replies
View Related
Jan 16, 2008
Hello,
is it possible to have a kind of dynamic subreport in a main report.
Let me illustrate this with an example:
Next to my table i would like to have a window (subreport) that changes content whenever i click on a different value
inside my table. In the subreport i would like to display detail information on specific cells in my table.
Is this possible in SSRS 2005?
Greetings
V.
View 4 Replies
View Related
Jun 18, 2007
Hi,
The report that I must create is related to the production order.
Conceptually it can be seen as a tree.
Where the root of the tree are the information Header of the production order.
The principals children of the Root are the Operations and the Requirements to produce such order.
For every Operation they are printed the Plants that are used and the Alternative Resources to effect the production.
There is a method to create a multilevel report?
I think that is not for nothing logical to create a single table containing many heterogenous fields because it would have to repeat already numerous information at the changing of a field.
I have created one datatable for every entity and I have tried to use subreport control, but evidently mistake in something.
In order to obtain the wanted result (for example to print the Order production Head information if the report jump at new page) I have tried to combine the use of List control, Table control and Subreport control in file rdlc, but I have not found the just combination.
Someone of you has already had to crare a multilevel report? Is possible to create a sub-subreport structure?
I have do that in VB.NET with ReportViewer local mode. I have posted the topic in this section because the problem of designe report is the same with local mode and remote mode.
Thanks
View 1 Replies
View Related
Nov 22, 2007
What we've found is that when you have two reports where one navigates to the other, if you click on the second page of the second report, it takes you to the second page of the original report. If you navigate over to the subreport again and click for the second page, it works appropriately. This is definitely a no-go for production code and this may delay our ship date because I would think this is definitely undesirable.
Conditions:
ASP.NET Report Viewer using Remote Reports
Report that links to another report
Both reports return more than one page
Reporting Services installed
Steps to Reproduce:
Download the source code here.
Follow the directions (near the bottom of the post) to get the project set up.
Run it and click on a link in the first report to go to the second report.
Click the arrow for page 2 of the second report.
Notice how it takes you back to page 2 of the first report (this doesn't happen when you are in preview mode in the Reporting Services project and I don't believe it does this in a smart client application).
Click on a link in the first report to go back to the second report.
Click the arrow for page 2.
Notice how it takes you to page 2 of the second report.
Here is a link with source code and a more detailed explanation: http://geekswithblogs.net/robz/archive/2007/11/21/Reporting-Services-2005-BUG-Report-Linking-and-Paging---ASP.NET.aspx
So what I am looking for is both a workaround for now and if this is determined to be a bug, to be fixed in the next service pack.
View 6 Replies
View Related
Jan 10, 2008
Hi,
I have a report which includes a subreport. I would like to position them in a vertical position so that they like like just one report.
I have placed them within a rectangle but there is still quite a vertical distance between them and I cannot find any margin properities to fix this.
Would appreciate any hints,tip & advice.
Thanks,
John
View 3 Replies
View Related
Dec 29, 2006
Hi,
I want to give filtering criteria in my SSRS report.
I have drop down list control having list of Email's of clients.
So, how can i pass the value of the particular Email id in my SSRS report using Report Viewer control?
How can i pass user input as parameter in my report using visula studio 2005?
Thanx,
Ruja
View 1 Replies
View Related
Mar 22, 2007
How can I carry a value over from a subreport to a main report?
If I have a total in a sub report, I want to use that total in expression on the main report.
Any ideas?
View 4 Replies
View Related
Oct 10, 2006
I was wondering if anyone knew how to take a value from a subreport and
compare it to a value iwthin the main report. We are trying to see if
the value in the subreport is greater than the value returned in the
main report. We want to make the value test red if it is greater than.
I know how to compare these values if they were in the same report, but
when it comes to subreports I am lost. Any ideas? Thanks in advance.
View 4 Replies
View Related
Apr 1, 2008
Hi All,
I have 2 reports where 1 is a subreport and the other one is a main report.
Can i change or refer to a control(item) in the main report depending on the value of an item in the subreport, when the subreport is being run?
Any comments are appreciated.
Thanks in advance.
payal
View 2 Replies
View Related
Mar 25, 2008
I have a base folder (Report Folder A) which has several reports. One of these is a report that is simply a subreport of one of the others in the folder (it uses different default parameters, which is why it's necessary).
I then created another folder (Report Folder B) for users who only have access to some of the data in the reports...so they have browser access to Folder B but not Folder A. All of the reports for the users work except for the one that contains the subreport. When I run the report with a subreport I get the message: "Error: Subreport could not be shown". I'm guessing this is because the users don't have access to the base report. Does anyone have an idea of how to work around this without giving the users access to the base report (in Folder A)?
Thanks,
Richard
View 8 Replies
View Related
Apr 11, 2008
Hi,
Is there anyway that i can access subreport field in main report? I just want it to be displayed. Thats it. I can not put subreport field in main report bcz it is based on the parameter passed by main report.
View 1 Replies
View Related
Jun 5, 2007
Here's my problem. I have a subreport that shows data and labels if data is returned. However, if no data is returned, the subreport doesn't show at all. I have a message on the subreport I would like to show if no data is returned, but the subreport won't show at all. Any ideas??
Thanks
View 1 Replies
View Related
Sep 28, 2006
SUBREPORT (License info to the right) SHOULD PRINT TO RIGHT OF ADDRESS INFORMATION ON LEFT. LIKE THIS...
Name ABC-12345
Address line 1 DEF-12345
Address line 2 GH1-12345
City, State Zipcode
The data is from one table and looks like this. Both the main report and subreport use a shared data souce.
Name Address line 1 City State Zipcode License
------------- ------------------- ------------- --------- ---------- ---------
Joe Schmoe 123 Maple Street Clearwater Florida 33777 ABC-12345
Joe Schmoe 123 Maple Street Clearwater Florida 33777 DEF-12345
Joe Schmoe 123 Maple Street Clearwater Florida 33777 GHI-12345
All lines are header lines. Subreport has been placed in top header line.
IT IS PRINTING SIMILAR TO THIS BUT SHOULD PRINT AS FIRST STATED ABOVE...
Name ABC-12345
DEF-12345
GH1-12345
Address line 1
Address line 2
City, State Zipcode
ISSUE: I would like the subreport to PRINT ALONG WITH the address information to its left. In Crystal Report a subreport could "Underlay Following Sections" - a wonderful feature Microsoft maybe should have copied. Is there a way to duplicate "underlay" behavior in SQL Reporting ? Thanks.
UPDATE: Coworker found workaround. Can concatenate Name, Adress line 1, Address line 2, City, State and Zipcode into one field. Would still like to know a more straightforward way.
View 1 Replies
View Related
Feb 27, 2008
I have a need to complete the following:
Main Report (Group level) Sum(FinalPayment) ** Completed
SubReport Sum(PaymentAdvances) ** Completed (passing parameters)
This is the part that I need help. I need to use an original value from the main report and a "return" value from the subreport.
Main Report (Footer) Sum(FinalPayment) + SubReport.Sum(PaymentAdances)
Is it possible to pass a return value back to the main report from a subreport?
Any help or direction on this?
View 5 Replies
View Related
Jan 18, 2007
Does SSRS 2005 have the issue fixed as to when the user exports a report to .xls format and the report contains a subreport?
In SSRS 2000, if there was a subreport in the main report, and the user exported the report to .xls, then it would just display an error message.
Thanks!
View 7 Replies
View Related
May 16, 2007
I have two subreports on one master report who's parameters @ReportDate would be set to the same date each time the report is run. When i run the master report i get an error for each report that tells me that one or more parameters required to run the report have not been specified. How do i pass the parameter i want to use in both reports from the master report through to the subreports.
Thanks again!
View 3 Replies
View Related
Sep 21, 2007
I need to convert a Crystal report that contains three subreports. Each of these subreports uses a different stored procedure to obtain data. The main report uses data from these subreports to calculate averages in the footer etc.
How do i get the data contained in these subreports so i can use it in my main report??
Thanks in advance
View 4 Replies
View Related
Apr 21, 2008
HELP!
I need to share the result of a calculation from a subreport to the main report
or
I need to group data from a secondary dataset the same and the primary dataset.
View 7 Replies
View Related
Jun 29, 2007
Do I need the report server running in order view a SSRS report in a report viewer control? I've created my report in .net and it works great when I'm viewing it in visual studio, but can I run it my web app without the report server.
View 1 Replies
View Related
Mar 7, 2007
Is it possible to retrieve the value of a subreport's field or control from the parent report? I'm doing some grouping in the subreport and need to retrieve the group by's data value from the subreport.
Also, is there a way to repeat the main page's body when subreport has a page break? ie you page break on some thing in the subreport and need the body and head of the parent report to repeat on subsequent pages.
Thanks,
Garick
View 3 Replies
View Related
Sep 21, 2007
I just finish my first basic report using Reporting Services and now I have to design a very complicated report.
I would like to know the purpose of tow Report Items : Subreport and Matrix.
If somebody can explain me the purpose and if he/she can point me to an example, it would be great.
Thanks
View 1 Replies
View Related
Mar 31, 2008
Hi,
We have two domains in our organisation, both with transitive trust of one another.
In our main domain we have a report server which is available for all users across both domains to access and use. Most of the time there isn't a problem but I'm having a bit of an issue with users from our second domain accessing a linked report containing 13 subreports.
The main report is fine and all users can view this, however, all subreports show an error message to users in our second domain.
As a bit of an experiment I have even given one user Content Manager rights on the report server but this hasn't solved the problem. I have checked that permissions are correct on ther server, folders and data sources dozens of times and cannot find any reason why second domain users are having this problem.
If anyone has any suggestions on how to solve this I would be grateful for help.
With humble thanks in advance,
Paul
View 3 Replies
View Related
Feb 10, 2008
Hi everyone,
We are working on a some required report templates and we are in a some deadlock now... We need to desing report templates something like on the image below. There are some data at the left and top (grey rectangles) and dynamic information from a datasource in the middle (actually a list - green rectangles). Our idea was to use a subreport to design required list, but the problem is that subreport does not support multi-columns layout (really very 'interesting' limitation from Microsoft's guys)... Does somebody have a some ideas how to design this report using MS SQL Reporting Services 2005?
http://www.upload-images.net/imagen/de18948ff6.jpg
View 3 Replies
View Related
