Control Output Of Stored Procedure
Feb 19, 2008
I have a very simple stored procedure that returns a list of employees. The procedure works fine. However, sometimes there is no records returned. In that case, I'd like to like the procedure to return a single record with predetermined values. I've added the YELLOW portion of the code to my existing proc to reflects the logic of what I am trying to accomplish.
CREATE PROC proc_Emp
@Sel_Country
AS
BEGIN
SELECT DISTINCT employee, hrid
FROM emp_table
WHERE country = @Sel_Country
@SEND_RESULTS =
CASE WHEN row_count = 0 THEN
SELECT 'No Country', 4444444444
ELSE
(send original results)
END
END
I need to:
Query for the employee list
If the row count is zero/null then return fixed values
Else return the orginal data from Step 1.
I'm guessing I need to use the OUTPUT command and configure some variables. But I'm not having much luck decoding BOL and I've not found any similar submissions to the forum.
Rob
View 7 Replies
ADVERTISEMENT
Nov 14, 2007
Hi all,
I have a several stored procedures that they are designed to do Update and Insert tasks and all of them after finishing the task will return the Inserted or Updated row.
The problem is sometime I would need to call the stored procedure inside other ones and somehow i need to stop the inner stored procedures from producing resultsets. I don't find any SET options in SQL documentation which could control this behavior and block resultsets from being sent to the client.
Is there any way i could do this?
Exmaple:
In following example as a result of dbo.AddressInsert being called within dbo.CustomerInsert, two resultsets are returned to the client!
Procedure dbo.AddressInsert(....)
as
BEGIN
Insert INTO Adress ....
SELECT * FROM AdressView WHERE AddressID = @@identity
END
Procedure dbo.CustomerInsert(...)
as
begin
-- transcation begin...
EXEC dbo.AddressInsert
INSERT INTO Customer....
-- end transcation
SELECT * FROM Customer WHERE CustomerID = @@identity
end
View 4 Replies
View Related
Dec 8, 2006
I am working on an OLAP modeled database.
I have a Lookup Transformation that matches the natural key of a dimension member and returns the dimension key for that member (surrogate key pipeline stuff).
I am using an OLE DB Command as the Error flow of the Lookup Transformation to insert an "Inferred Member" (new row) into a dimension table if the Lookup fails.
The OLE DB Command calls a stored procedure (dbo.InsertNewDimensionMember) that inserts the new member and returns the key of the new member (using scope_identity) as an output.
What is the syntax in the SQL Command line of the OLE DB Command Transformation to set the output of the stored procedure as an Output Column?
I know that I can 1) add a second Lookup with "Enable memory restriction" on (no caching) in the Success data flow after the OLE DB Command, 2) find the newly inserted member, and 3) Union both Lookup results together, but this is a large dimension table (several million rows) and searching for the newly inserted dimension member seems excessive, especially since I have the ID I want returned as output from the stored procedure that inserted it.
Thanks in advance for any assistance you can provide.
View 9 Replies
View Related
Sep 13, 2001
Is there anyone out there who has successfully setup version control of stored procedures with Source Safe and Visual Interdev?
View 1 Replies
View Related
Jul 20, 2005
Hi,I am trying to put SQL Server Stored Procedures into Sourcesafe as perthe Microsoft Knowledge Base article 818368, but have run into aproblem.The web server is SQL Server 2000 running on Windows 2003 Server. Theclient dev environment is Visual Studio 2003 Enterprise DeveloperEdition.I have carried out the following steps successfully:-1. Installed Sourcesafe client tools on the Server (sourcesafe is onanother server)2. Run the MSSQLServer service under a domain account that has Readand Write access to the Sourcesafe database.3. Added the above user to Sourcesafe using the Administrator tool.4. Installed the VS6 Stored Procedure Version Control components onthe Server5. Enabled Version Control for Stored Procedures on the clientHowever when I right-click on the Stored Proc node in Server explorerI do not get any of the Sourcesafe menu options. They are not greyedout, they are simply not there!Any help would be appreciated.Alternatively if anyone has recommendations for other strategies orother tools to use for this purpose than Sourcesafe then this wouldalso be welcomeKarl
View 1 Replies
View Related
Apr 30, 2007
I create StringBuilder type forconcating string to create a lot of stored procedure at once However When I use this command BEGIN TRANSACTIONBEGIN TRY--////////////////////// SQL COMMAND ///////////////////////// -------------------- This any command --/////////////////////////////////////////////////////////// --COMMIT TRANEND TRYBEGIN CATCH IF @@TRANCOUNT > 0 ROLLBACK TRANSACTION;END CATCHIF @@TRANCOUNT > 0 COMMIT TRANSACTION; on any command If I use Create a lot of Tablessuch as BEGIN TRANSACTION
BEGIN TRY
--////////////////////// SQL COMMAND /////////////////////////CREATE TABLE [dbo].[Table1]( Column1 Int , Column2 varchar(50) NULL ) ON [PRIMARY]CREATE TABLE [dbo].[Table2](
Column1 Int ,
Column2 varchar(50) NULL
) ON [PRIMARY]
CREATE TABLE [dbo].[Table3](
Column1 Int ,
Column2 varchar(50) NULL
) ON [PRIMARY]
--///////////////////////////////////////////////////////////
--COMMIT TRAN
END TRY
BEGIN CATCH
IF @@TRANCOUNT > 0
ROLLBACK TRANSACTION;
END CATCH
IF @@TRANCOUNT > 0
COMMIT TRANSACTION; It correctly works. But if I need create a lot of Stored procedure as the following code : BEGIN TRANSACTION
BEGIN TRY
--////////////////////// SQL COMMAND /////////////////////////
CREATE PROCEDURE [dbo].[DeleteItem1]
@ProcId Int,
@RowVersion Int
AS
BEGIN
DELETE FROM [dbo].[ItemProcurement]
WHERE
[ProcId] = @ProcId AND
[RowVersion] = @RowVersion
END CREATE PROCEDURE [dbo].[DeleteItem2]
@ProcId Int
AS
BEGIN
DELETE FROM [dbo].[ItemProcurement]
WHERE
[ProcId] = @ProcId
END
CREATE PROCEDURE [dbo].[DeleteItem3]
@ProcId Int
AS
BEGIN
DELETE FROM [dbo].[ItemProcurement]
WHERE
[ProcId] = @ProcId
END
--///////////////////////////////////////////////////////////
--COMMIT TRAN
END TRY
BEGIN CATCH
IF @@TRANCOUNT > 0
ROLLBACK TRANSACTION;
END CATCH
IF @@TRANCOUNT > 0
COMMIT TRANSACTION; It occurs Error ????? Please help me How should I solve them ?
View 1 Replies
View Related
Jan 11, 2008
Hi, I have an app where I am calling a stored procedure that runs and returns an integer. I would like to assign this integer to a control on the page. Here is a sample of code and below I will give the errors: Protected Sub NewButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles NewButton.Click Dim tempconnection As New Data.SqlClient.SqlConnection(ConfigurationManager.ConnectionStrings("TestConnectionString").ConnectionString) Dim tempproc As New Data.SqlClient.SqlCommand("SP_FetchProviders", tempconnection) Dim tempparam As New Data.SqlClient.SqlParameter tempproc.CommandType = Data.CommandType.StoredProcedure tempproc.Parameters.Add(New SqlParameter("@Agency_ID", Data.SqlDbType.Int)) tempproc.Parameters("@Agency_ID").Value = "8" 'Using a number just to test, will be populated by a session variable later tempparam = tempproc.CreateParameter() tempparam.ParameterName = "@OutValue" tempparam.Direction = Data.ParameterDirection.ReturnValue tempparam.SqlDbType = Data.SqlDbType.Int tempconnection.Open() tempproc.ExecuteNonQuery() Dim labelfill As String labelfill = tempproc.Parameters("@OutValue").Value tempconnection.Close() CType(Me.DetailsView1.FindControl("OmbudINSDDL"), DropDownList).Items.Add(labelfill) 'This is inside of a detailsview templatefield End Sub Here is the stored procedure set ANSI_NULLS ONset QUOTED_IDENTIFIER ONgoALTER procedure [dbo].[SP_FetchProviders] @Agency_ID intas Select Name, ProviderSubUnit_ID From ProviderSubunit a join Ombudsman b on a.contractproviders_id=b.contractproviders_id Where b.agency_id = @Agency_ID Order by Name This takes the @Agency_ID as input variable, and has returns an integer (according to SQL management studio). When I try to run my code I get the error that an sqlparameter with parametername @OutValue is not contained by this sqlparametercollection. This may be a simple question, but does the outvalue have to be declared in the stored procedure? If so, can you provide the right syntax? If not, can you offer a suggestion to populate the dropdownlist with the returned value? Thanks in advance.
View 3 Replies
View Related
May 15, 2008
Hi, I've a ListBox Web Server Control where I select a list of citiesnow I would like to create a stored procedure with the selected values... please note that I use metods like these for execute my Stored procedure public DataSet Getgfdfgh(SqlConnection connection, String IDAttivitaTipo, DateTime DataInizio, DateTime DataFine) { ConnectionState currState = connection.State; if (((connection.State & ConnectionState.Open) != ConnectionState.Open)) connection.Open(); try { SqlParameter[] parameters = new SqlParameter[3]; parameters[0] = new SqlParameter("@IDAttivitaTipo", IDAttivitaTipo); parameters[1] = new SqlParameter("@DataInizio", DataInizio); parameters[2] = new SqlParameter("@DataFine", DataFine); SqlCommand cmd = CreateStoreProcedureCommand("Getfhdfh", connection, parameters); SqlDataAdapter adapter = new SqlDataAdapter(cmd); DataSet ds = new DataSet(); adapter.Fill(ds); return ds; } finally { if ((currState == ConnectionState.Closed)) connection.Close(); } } How Can I manage a list of values ??Thanks for help me!!
View 1 Replies
View Related
Jul 23, 2005
Wanted to know which among these options is better and why? Or if theircould be scenarios where we could opt for one of these.a) flags passed from code to control the execution of queries within astored procedure i.e. - where queries within a single stored procedureare controlled by flags passed to them.ORb) Break individual queries into separate stored procedure
View 4 Replies
View Related
Aug 19, 2015
I have defined a stored procedure with one parameter. With this parameter I'm able to controll which year of the sales amount data should be selected. This works fine.
Now I want to implement this stored procedure as the source of the partitions. But if I do this I get an error. The syntax-check says, that everything is fine. But if I want to calculate the partition with this command: "exec dst.fact_umsatz_year 0"Â get the following error (in German):
OLE DB-Fehler: OLE DB- oder ODBC-Fehler : Falsche Syntax in der Nähe von ')'.; 42000; Falsche Syntax in der Nähe des exec-Schlüsselworts.; 42000.
Fehler im OLAP-Speichermodul: Fehler beim Verarbeiten der FACT Umsatz Pivot View-Partition der Anzahl Kunden-Measuregruppe für den Vertrieb-Cube aus der OLAP AS-Datenbank.
View 2 Replies
View Related
Oct 18, 2006
1 public static List<string> viewtree(int root)
2 {
3 SqlConnection con = new SqlConnection(mainConnectionString);
4 con.Open();
5 try
6 {
7 List<string> ids = new List<string>();
8 SqlCommand command = new SqlCommand(@"ShowHierarchy2", con);
9 command.Parameters.AddWithValue("@root", root);
10 command.Parameters.Add(new SqlParameter("@outstring", SqlDbType.VarChar));
11 command.Parameters["@outstring"].Direction = ParameterDirection.Output;
12 command.CommandType = CommandType.StoredProcedure;
13 //command.ExecuteScalar();
14 //ids = command.Parameters["@outstring"].Value.ToString();
15
16 SqlDataReader dr = command.ExecuteReader();
17 while (dr.Read())
18 {
19 ids.Add((dr["@outstring"].ToString()));
20 }
21 //command.Parameters.Clear();
22
23 return ids;
24 }
25 finally
26 {
27 con.Close();
28 }
29 }
Can someone tell me why i'm getting the following error:String[1]: the Size property has an invalid size of 0. Thanks in advance
View 7 Replies
View Related
Apr 3, 2004
I have a variable @NetPay as type money, and a stored proc spGetNetPay.
The output of spGetNetPay has one column NetPay, also with type of money, and always has one row.
Now I need assgin output from spGetNetPay to user variable @NetPay. How can I do That?
Set @NetPay = (Exec spGetNetPay) Sorry this does not work. Is it possible to create a user defined function?
I have little knowledge about User defided function. Is is the way I should go?
Thanks.
David J.
View 3 Replies
View Related
Jul 4, 2001
I'm calling a stored procedure from outside program using
Execute SPid(a stored procedure).
In the SPid procedure i want to return a value using
Output.
Can any one tell me how do it since i never used it before ?
View 3 Replies
View Related
Sep 27, 2000
Hi
I am running a stored procedure which first puts the data in a temp table and then gives the output...
the output is supposed to generate a report based on data from temp table
However when i run it, the first 2 statements are
(15345 row(s) affected)
(407 row(s) affected)
abd then the select statement runs...due to this, the report in ASP returns an error...does anyone know how i can suppress the first 2 lines and get only the actual data as output
any help will be appreciated
regards,
View 3 Replies
View Related
Apr 11, 2002
When I run a script in query analyzer using a script (A "GO" statement exists after each SQL) I get the results on screen as soon as each query completes. When I run thru stored proc, I can get the result only after the whole procedure completes execution. Is there any way to get the outpout immediately as soon as each query completes? This will be useful in tracking thre progress of a stored proc.
Thanks
Satish
View 2 Replies
View Related
Feb 8, 2007
I am using a stored procedure to query tables and format a record to write to a file. Below is the syntax I'm using to do the write.
set @cmd = 'echo ' + rtrim(@patient_rec) + ' >> f:output
ecall.csv'
exec master..xp_cmdshell @cmd
The procedure will write about 30,000 records or so and then quit writing to the file. Is there a setting I have to modify to write more records or is there a better way to do this?
View 6 Replies
View Related
May 25, 2006
Dear All,How can I show the resultrecords of a SP.I can be done by doubleclick the SPname?But how to do it by code.I want the following interfaceIn my form the user1 selects a SP (combobox showing a userfrinly name)2 adds the related parameters3 and then click the show result-buttonbut the .execute command doen't show teh records.I want the same output as you have doublclicking the SPname in theobjectwindow.Thanks,Filip
View 1 Replies
View Related
Aug 30, 2007
Hi every experts
I have a exist Stored Procedure in SQL 2005 Server, the stored procedure contain few output parameter, I have no problem to get result from output parameter to display using label control by using SqlCommand in Visual Studio 2003. Now new in Visual Studio 2005, I can't use sqlcommand wizard anymore, therefore I try to use the new sqldatasource control. When I Configure Datasource in Sqldatasource wizard, I assign select field using exist stored procedure, the wizard control return all parameter in the list with auto assign the direction type(input/ouput....), after that, whatever I try, I click on Test Query Button at last part, I always get error message The Query did not return any data table.
My Question is How can I setup sqldatasource to access Stored Procedure which contain output parameter, and after that How can I assign the output parameter value to bind to the label control's Text field to show on web?
Thanks anyone, who can give me any advice.
Satoshi
View 2 Replies
View Related
Aug 19, 2007
I have two stored procedures one generates an output parameter that I then use in the second stored procedure.
1 Try2 Dim myCommand As New SqlCommand("JP_GetChildren", myConn)3 myCommand.CommandType = Data.CommandType.StoredProcedure4
5 myCommand.CommandType = Data.CommandType.StoredProcedure6 myCommand.Parameters.Add(New SqlParameter("@ParentRule", Data.SqlDbType.NVarChar))7 myCommand.Parameters.Add(New SqlParameter("@PlantID", Data.SqlDbType.NVarChar))8 myCommand.Parameters.Add(New SqlParameter("@New_ReleasingRulePrefix", Data.SqlDbType.NVarChar))9 myCommand.Parameters.Add(New SqlParameter("@New_ReleasingRuleSuffix", Data.SqlDbType.NVarChar))10 myCommand.Parameters.Add(New SqlParameter("@New_PlantID", Data.SqlDbType.NVarChar))11 myCommand.Parameters.Add(New SqlParameter("@New_RuleSetID", Data.SqlDbType.NVarChar))12 myCommand.Parameters.Add(New SqlParameter("@Count", Data.SqlDbType.Int))13 myCommand.Parameters.Add(New SqlParameter("@IDField", Data.SqlDbType.NVarChar))14
15 Dim OParam As New SqlParameter()16 OParam.ParameterName = "@IDFieldOut"
17 OParam.Direction = ParameterDirection.Output18 OParam.SqlDbType = SqlDbType.NVarChar19 myCommand.Parameters.Add(OParam)20
21
22 myCommand.Parameters("@ParentRule").Value = txtParentRule.Text23 myCommand.Parameters("@PlantID").Value = txtStartingPlantID.Text24 myCommand.Parameters("@New_ReleasingRulePrefix").Value = txtReleaseRuleFromPrefix.Text25 myCommand.Parameters("@New_ReleasingRuleSuffix").Value = txtReleaseRuleFromSuffix.Text26 myCommand.Parameters("@New_PlantID").Value = txtEndingPlantID.Text27 myCommand.Parameters("@New_RuleSetID").Value = txtEndingRuleSetID.Text28 myCommand.Parameters("@Count").Value = 129 myCommand.Parameters("@IDField").Value = " "
30 myCommand.Parameters("@IDFieldOut").Value = 031
32 myCommand.ExecuteNonQuery()33
34 Dim IDField As String = myCommand.Parameters("@IDFieldOut").Value35
If i run this stored procedure in sql it does return my parameter. But when i run this code IDField comes back null. Any ideas
View 6 Replies
View Related
Oct 23, 2007
HiI have this code snippet[CODE] string connstring = "server=(local);uid=xxx;pwd=xxx;database=test;"; SqlConnection connection = new SqlConnection(connstring); //SqlCommand cmd = new SqlCommand("getInfo", connection); SqlDataAdapter a = new SqlDataAdapter("getInfo", connection); a.SelectCommand.CommandType = CommandType.StoredProcedure; a.SelectCommand.Parameters.Add("@Count", SqlDbType.Int).Value = id_param; DataSet s = new DataSet(); a.Fill(s); foreach (DataRow dr in s.Tables[0].Rows) { Console.WriteLine(dr[0].ToString()); }[/CODE] When I seperately run the stored procedure getInfo with 2 as parameter, I get the outputBut when I run thsi program, it runs successfully but gives no output Can someone please help me?
View 1 Replies
View Related
Feb 3, 2008
I have a stored procedure that inserts a new record, and returns the ID value for the newly inserted record. The procedure works fine, but I'm unable to get that return value in my code. Here's what I have:
IF OBJECT_ID ( 'dbo.dbEvent', 'P') IS NOT NULL
DROP PROCEDURE dbEvent
GO
CREATE PROCEDURE
@Name varchar(200)
,@Location varchar(200)
AS
INSERT INTO Event
(
NAME
, LOCATION
)
VALUES
(
NAME
, @LOCATION
)
SELECT SCOPE_IDENTITY()
And my code behind: public Int64 Insert(SqlConnection Conn)
{
try
{
using (SqlCommand Command = new SqlCommand("dbo.dbEvent", Conn))
{
Command.CommandType = CommandType.StoredProcedure;
Command.Parameters.Add("@ID", ID).Direction = ParameterDirection.Output;
Command.Parameters.Add("@NAME", SqlDbType.VarChar, 200).Value = PermitName;
Command.Parameters.Add("@LOCATION", SqlDbType.VarChar, 200).Value = Location;
if (Conn.State != ConnectionState.Open) Conn.Open();
Command.ExecuteNonQuery();
Int64 _requestId = Convert.ToInt64(Command.Parameters.Add("@ID", SqlDbType.BigInt).Value.ToString());
return _requestId;
}
I'm getting the error that I have "Too many arguments specified" in my Insert() method. When I test the procedure in Query Analyzer, it works fine and returns the correct value.
Any suggestions? Don't I need to declare that return value in my .NET code as an output parameter?
View 2 Replies
View Related
Feb 11, 2008
i built a stored procedure with inserting in to customers table.
i have one column with identity.
so want to take that identity column value in the same stored procedure.
so how can i write that procedure with insert in to statements in that stored procedures.
can any one tell me.
also how to get that value in ado.net 2.0.
friends please tell me.
View 3 Replies
View Related
Aug 3, 2004
Hi
I've an existing SQL 2000 Stored Procedure that return data in many (~20) output parameters.
I'm starting to use it in a .Net c# application and it seems to insist that I setup all the output parameters:
SqlParameter param = cmd.Parameters.Add("@BackgroundColour",SqlDbType.TinyInt);
param.Direction=ParameterDirection.Output;
even if I only need the value of a single one.
Is this right? Is there a way to avoid coding every one every time?
View 3 Replies
View Related
Sep 27, 2005
Hi,Got an annoying SQL / .net error. I've created a stored procedure to take in an ID and map this to an ID table and get another ID out. So i have one ID in and one out. I get the following error:Procedure 'sp_SvrMapping' expects parameter '@rID', which was not supplied.Any idea why this happens? surely the output ID doens't need to be defined before its retrived? If so how?Thanksdrazic19p.s. code for both below.**************************************************CREATE PROCEDURE dbo.sp_SvrMapping
( @uID int, @rID int OUTPUT )
As
SELECT @rID = rID FROM tbl_mapping WHERE uID= @uIDGO**************************************************
Dim conStr As String = ConfigurationSettings.AppSettings("str_connAuth")
Dim myConn As New SqlConnection(conStr)
Dim myComm As New SqlCommand("sp_SvrMapping", myConn)
Dim test As String = "1"
myComm.CommandType = CommandType.StoredProcedure
myComm.Parameters.Add("@uID", CInt(test))
myConn.Open()
myComm.ExecuteNonQuery() <--- error called
If Not IsDBNull(myComm.Parameters("@rID").Value) Then
MappedServerAccount = myComm.Parameters("@rID").Value
End If
myConn.Close()
View 2 Replies
View Related
Dec 3, 2005
EXEC('SELECT COUNT(docid) AS Total FROM docs WHERE ' + @QueryFilter)I want to get the cound as an output parameter.I can get output parameters to work only when I dont use EXEC. I need to use EXEC for this case since @QueryFilter gets generated in the stored procedure based on some some other data.How can I get that count using ouput parameter?
View 2 Replies
View Related
Jul 11, 2001
Hi.
I'm using stored procedures in SQL7 to return a list of items to a website where they are presented. A new requirement is to present these items in a random order on the website. I have two approaches to this one, either making the result from SQL7 random or presenting the ordered results randomly. Since the presentation logic is used several times (different country subsites), it would be the easiest way to get a randomized result from the stored procedure, which would mean that I only have to change the procedure.
Any thoughts on how to accomplish this, that is returning a list of items but in random order, so that the presentation sequence would be different for each access to the website ??
Any help would be appreciated : )
Thanks!
Eirik Kjølsrud
Systems Developer, Apropos Internett - Norway
View 1 Replies
View Related
Aug 21, 2001
Hello everyone,
I am working through a tutorial and have stumbled into something that does not quite make sense to me. I was wondering if someone could help me understand this.
I have created this SP, this all makes sense to me due to the assignment of the artistname column value to the @artistname variable. In other words what is on the right of the equal sign is assigned to what is on the left.
create procedure ShowPopStyle
@style varchar(30),
@artistname varchar(30) output
as
select @artistname = artistname
from artists
where style = @style
go
Now when you execute this SP, what does not makes sense to me is if I need to declare a variable to hold the output, which I presume is null, shouldn't the @returnname be on the left side of the equal sign instead of the right?
declare @returnname varchar(30) -- variable for the output from the procedure
exec showpopstyle 'Pop', @artistname = @returnname output
print @returnname
Thanks
Kevin
View 2 Replies
View Related
Sep 2, 2000
Hi
I should validate a USER and if the user is not a valid user it should
return a message to the front end application for this I have a procedure
like this .
Basically I need to pass an output parameter to the front end application
returned by this procedure.
Create procedure test
@userid VARCHAR(20)
AS
Declare c1 cursor AS
Select userid from USERS_TBL
Open Cursor C1
FETCH NEXT from C1 INTO @Temp
While @fetch_status = 0
BEGIN
If @Temp <> @Userid
-- IF the USER is not a valid USER ...It should not execute
the Futher code(statement) it should exit the procedure
by returning the error statement.
---
---
---
FETCH NEXT from C1 INTO @Temp
END
Thanks
VENU
View 1 Replies
View Related
Dec 3, 2004
can we use output parameter with insert query in stored procedure. suppose we insert a record and we want to get the id column of this record which is identity column. we want to get this value in output parameter.
ie insert record and get its id column value in output parameter.
any one knows the way?
View 1 Replies
View Related
Mar 7, 2004
I have a stored procedure (named Insert_SRegister) that calls another
stored procedure (named: Generate_Student_Code) and a value should be returned from the second to the first one.
The program goes like this:
The first stored procedure inserts info of students and every student should have his own id which is gentratead by the second stored
procedure.
The second sp which generates the id does its job well and the first sp which inserts the info does its job well too, the Problem occurs when the genrated ID is to retrurn from the second sp to the first. I do no not know why it refuses to be transmitted in a correct way it gives no error but the id inserted in the db is always zero and I am sure that the id is generated in correct way, the problem occurs only in the transmission;
The code of the first procedur is :
Create Procedure dbo.Insert_SRegister
@YGroup VarChar (3),
@YDate VarChar (4),
@YTerm Char(1),
@SName VarChar(30),
@SSecondName VarChar(30),
@SFirstName VarChar(30),
@SGender TinyInt,
@SBDate DateTime,
@SBPlace VarChar(50),
@SOCountry VarChar(50),
@SOPassCount VarChar(50),
@PassNo VarChar(50),
@SOLang VarChar(50),
@MOLang VarChar(50),
@MName VarChar(50),
@MHAdd VarChar(50),
@MHT1 VarChar(20),
@MHT2 VarChar(20),
@MHT3 VarChar(20),
@MHMob VarChar(20),
@MWAdd VarChar(50),
@MWT1 VarChar(20),
@MWT2 VarChar(20),
@MExt VarChar(10),
@MWMob VarChar(20),
@FName VarChar(50),
@FHAdd VarChar(50),
@FHT1 VarChar(20),
@FHT2 VarChar(20),
@FHT3 VarChar(20),
@FHMob VarChar(20),
@FWAdd VarChar(50),
@FWT1 VarChar(20),
@FWT2 VarChar(20),
@FExt VarChar(10),
@FWMob VarChar(20),
@EAdd VarChar(50),
@ETele VarChar(20),
@SchName VarChar(50),
@SAdd VarChar(50),
@FBNo Smallint,
@FSNo Smallint,
@FONo VarChar(50),
@EMedical VarChar(1000),
@FDetails VarChar(1000),
@FRDetails VarChar(1000),
@PName VarChar(50),
@StudentStatus VarChar(50) OUTPUT,
@ID VarChar (50) OUTPUT
As
Begin
Declare @Exists Int, -- Return Value
@StudentCode VarChar(50)
-----------------------------------------
-- here I call the second proc and assgin it output to variable
--@StudentCode
-----------------------------------------------------------------------------------
exec @StudentCode = dbo.Generate_Student_Code @YGroup,@YDate, @StudentCode OUTPUT
----Do work and insert info in db
End
Code of the second stored procedure is:
ALTER Procedure dbo.Generate_Student_Code
@YGroup VarChar (3),
@YDate VarChar (4),
@newID VarChar (50) OUTPUT
As
Begin
set nocount on
Declare @Exists int, -- Return Value
@Mv varchar(5),
@IdLen int
If Exists(Select SID
From SRegisteration)
Begin
select @Mv = CAST(CAST(Max(RIGHT(SID, 5))AS int) + 1 AS varchar(50)) From SRegisteration
Set @IdLen = DATALENGTH(@Mv)
Set @Mv =
case
when @IdLen = 1 then '0000' + @Mv
when @IdLen = 2 then '000' + @Mv
when @IdLen = 3 then '00' + @Mv
when @IdLen = 4 then '0' + @Mv
else @Mv
end
Set @newID = 'S' + '-' + @YGroup + '-' + @YDate + '-' + @Mv
---------Here I return the ID value
select @newID
--------------------------------------
Select @Exists = 1
End
Else
Begin
Select @Exists = 0
Set @newID = 'S' + '-' + @YGroup + '-' + @YDate + '-' + '00001'
---------Here I return the ID value
select @newID
------------------
Return @Exists
End
End
View 2 Replies
View Related
May 7, 2008
Hi,
I've a large number of stored procedures that output result sets, as part of a test script it would be useful for me to be able to save the results from these stored procedures into temporary tables, without having to pre-create these tables, i.e. use the equivalent of a select * into statement.
Is this possible ?
Sean
View 2 Replies
View Related
Feb 24, 2006
I am calling a procedure with two input parameters and one output parameter (third) in the following format. I'm receiving a database error on the return parameter. *result. What is the correct syntax for an output parameter.
Code:
CSTRING strSQL;
strSQL.Format("BEGIN EQUIPMENT_UTILITIES.MOVE_EQUIPMENT('%s', '%s', '%d'); END;",(LPCSTR)lpEQNum,(LPCSTR)lpMoveTo, result); <-Failing
at '%d' result.
Thanks.
View 1 Replies
View Related
Jun 8, 2006
I am new to SQL server - Would appreciate any help.
I have a stored procedure (A) that creates a temp table with a single field of varchar(1000).
I populate this table with string data and with contents of another table obtained via the use of a cursor.
In a nutshell I am creating an XML document representation where each line of the temp table is a line of the xml document.
At the end of the stored procedure I select all of the fields from the temp table.
I have another stored procedure (B) that uses xp_sendemail and uses stored procedure (A) as the query for the attachment.
The problem is that the attachment appears to contain all unicode characters and will not open in windows explorer. It will open in XML SPY and other XML editors.
If I look at the data in a simple editor such as editplus, I see that each chracter is followed by a null character which is why I am assuming it is unicode.
Any idea how to get the select output / email attachment to exclude these null characters?
View 2 Replies
View Related
