I'm writing a page to do some reporting off of one of our databases, and I'm using 3 control parameters for my sql query that feeds my datagrid. 2 of the ControlParameters are from dropdownlists, and one is from a RadioButtonList. The ControlParameters that reference the dropdownlists are both working well, but the one for the RadioButtonList is not.
The error I am getting is: Exception Details: System.Data.SqlClient.SqlException: Line 1: Incorrect syntax near '@Booga'. (I changed my ControlParameter name from DateStr to Booga to try to avoid any conflicts with reserved words.)
<asp:SqlDataSource ID="SqlDataSource1" runat="server" SelectCommand="SELECT * FROM CallLog INNER JOIN Profile ON CallLog.CustID = Profile.CustID WHERE (Profile.LocationName = @LocationName) AND (CallLog.CallStatus = @CallStatus) AND @Booga "
I have a query that returns multiple values for a dataset called dsLastWeekOfPeriod. The query returns to me the last week of every period for this fiscal year. I have a parameter called LastWeekOfPeriod, and it is multi valued.
In my report, I want a border for every row in the matrix's dataset where the fiscal week of year matches one of the values in the parameter LastWeekOfPeriod.
I've tried a few different lines of code in the BorderStyle section of the Properties of the row in the matrix, but the border is not appearing. Could somebody help me with the code? Thanks.
I have an ASP page which uses an SQL data source control, as shown below: <asp:SqlDataSource ID="mySQL" runat="server" ConnectionString="<%$ ConnectionStrings:mySQLConnectionString %>" SelectCommand="SELECT device FROM device_table WHERE (device_id IN (@devicelist))"> <SelectParameters> <asp:Parameter DefaultValue="" Name="devicelist" Type="String" /> </SelectParameters> </asp:SqlDataSource>The problem is getting the "IN" clause of the select statement to work via the ASP page with code behind in C#. If I test the query in the page designer when configuring the SQL control by inserting 'device-1','device-2','device-3' as the value for the "devicelist" parameter, everything works as expected. However, when that same value is written programmatically into the DefaultValue of the parameter, the resulting query contains no results (as if the string contents are invalid). If I alter my program to supply a single entry (with no commas) it seems to work as well. I suspect the comma (and possibly the single-quote) characters in my string when multiple entries are involved are causing the issue.Is there a proper technique for getting the requisite quote-delimited, comma-separated list into the SQL control command parameter correctly? Should I be using some sort of escape sequence for the single-quote and comma characters? Should I be using another "type" for the parameter; one that accepts an array of entries? I have not been able to find any examples or documentation that provides an answer.
I have created an ASP.NET website with a ReportViewer on. The report renders fine, but when I change one of the parameters (manually), the report seems to invalidate itself and a blank while area is drawn. I would like the same behaviour as in the WinForms variant, where rhe rendered report remains the same until the 'View Report' button is pressed.
I'm creating a report with a Datetime parameter. There's no available values, so the calendar control comes out automatically when I run/preview the report. Now, when I select the date in my calendar control, say for example I select 2/5/07 (2nd of May) and run the report, it gives me data from 5th of Feb. Can anyone help me with this date format problem ???
Not sure if it's related to my problem, I did edit the language tag in the XML source code of my report to have en-AU so that the dates field is showing in the correct dd/mm/yyyy format.
I have a report which has a multi-value parameter. Problem is, it can contain up to 100 options.Is there a way to limit the number of options that is passed to the SQL statement?. EG list has 100 options, user selects 10 but only the first 4 selected options are passed to the SQL statement. Many Thanks Delli
I have used my parameter value in where clause of my dataset control SQL query. When I choose a single value in my multiple-value parameter then I get output as expected. Hovewer when I choose multuple values I get an arror:
Only one expression can be specified in the select list when the subquery is not introduced with EXISTS. ---------------------------- Query execution failed for dataset 'DATABASE'. (rsErrorExecutingCommand) ---------------------------- An error has occurred during report processing. (rsProcessingAborted)
I am convinced that it's a syntax problem. Is there a way I can change syntax of data output from query:
select @parameter
I need output to be like: value, value, value ... etc.
The dataset control query looks something like the following:
select ID, a, b, c, d from DATASET.dbo.Table where ID in (select @parameter)
I have been searching through google for weeks to solve this and got this far and got stuck. Is it possible at all to achieve what I am looking for?
I want to Change parameter position in SSRS report.I need Start Date and End Date Parameter at same column so client can easily select Start Date and End Date.I have tried a lot but not succeed.
How Can I change the position of Start Date and End Date.I can't change order of other three parameter Select Institutions, Select Author and Course Pack Names parameter because they are internally related to each other(forward dependencies are there).
I am passing the partameters to MS Report Viewer control to view the report. It is working fine with normal parameters like 'abc', 'Jon' etc. But fails with parameters having special characters like 'abc+', 'Version 1.1 Part 1', 'R1.8 RC' throws error " The parameter is missing a value"
I need to pass a parameter from control flow to data flow. The data flow will use this parameter to get data from a Oracle source.
I have an Execute SQL task in control flow to assign value to the Parameter, next step is a data flow which will need take a parameter in the SQL statement to query the Oracle source,
The SQL Looks like this:
select * from ccst_acctsys_account
where to_char(LAST_MODIFIED_DATE, 'YYYYMMDD') >?
THe problem is the OLE DB source Edit doesn€™t have anything for mapping parameter.
Hi All, I am placing a Matrix inside the table control for grouping requirements,but when we export the report to the Excel, the contents inside the table cell are ignored. Is there any way to get the full report exported, as per the Requirement.Please help me with this issue.
UPDATE #2: When it said "Do you want to install Microsoft SQL Server" I said "yes" and that caused it to work. I exited and re-ran and now the print runs w/o the "install SQL Server" (If the prompt had said "Do you want to install the print dialog" we wouldn't be having this discussion...)
UPDATE: After posting this i discovered that the same thing occurs when attempting to print the report direct from IE6: First a dialog pops up "Do you want to install this software?" Name: Microsoft SQL Server. When I click "Don't Install" I get the dialog "unable to load client print control." Since this happens direct from IE6 I suspect it's browser settings. I'll resume tomorrow and post a followup.
My WinForm C# app integrates Reporting Services by calling them from WebBrowser controls. The problem is attempts to print cause a dialog: "unable to load client print control."
I've read prior posts that say "enable Active-X in your browser" - I don't know how to do that from a WebBrowser control.
Any ideas how to support Reporting Services "Print" from within a WebBrowser control?
Hello, since a couple of days I'm fighting with RS 2005 and the Stored Procedure.
I have to display the result of a parameterized query and I created a SP that based in the parameter does something:
SET ANSI_NULLS ON SET QUOTED_IDENTIFIER ON CREATE PROCEDURE [schema].[spCreateReportTest] @Name nvarchar(20)= ''
AS BEGIN
declare @slqSelectQuery nvarchar(MAX);
SET NOCOUNT ON set @slqSelectQuery = N'SELECT field1,field2,field3 from table' if (@Name <> '') begin set @slqSelectQuery = @slqSelectQuery + ' where field2=''' + @Name + '''' end EXEC sp_executesql @slqSelectQuery end
Inside my business Intelligence Project I created: -the shared data source with the connection String - a data set : CommandType = Stored Procedure Query String = schema.spCreateReportTest When I run the Query by mean of the "!" icon, the parameter is Prompted and based on the value I provide the proper result set is displayed.
Now I move to "Layout" and my undertanding is that I have to create a report Paramater which values is passed to the SP's parameter... So inside"Layout" tab, I added the parameter: Name allow blank value is checked and is non-queried
the problem is that when I move to Preview -> I set the value into the parameter field automatically created but when I click on "View Report" nothing has been generated!!
I have two report , first is main report which is matrix and have one parameter User_ids which is multi value selection and my second report is basic chart of user_wise performance.
Now, my main report (matrix ) works fine for Multiple selection of users and i have putted one textbox on main report chart which has action properties set for chart report, when user click on chart button it must goes to chart with user selected in main report. Now , i have used expression for parameter to send it like ..
=join(parameter!user_id!value,",") which pass selected value to chartÂ
And when I am selecting single user it passing that value to chart parameter list but , when it is more than one user it errors with conversion failed when converting the nvarchar value '121,128' to data type int. But my chart also works when passing 121,128 in user parameter in preview of report .
I need "conditional" cascading parameters: In Report Manager when one changes parameter 1, parameter 2 get changed based on parameter 1. Optionally, one can also enter values to parameter 2 directly.
I was able to achieve this in SSRS 2000 (SP2) with the following setups. SSRS 2005 and SP1 no longer works - Parameter 2 always shows its default value regardless whether one select a value in Parameter 1 or not.
Parameter 1 available values: from query default values: non query (specify a value "<None>") Parameter 2 available values: Non query (no value specified) default values: from query (based on Parameter 1)
It seems to me that the default value in SSRS 2000 is considered as cascading parameter. But it is no longer the case in SSRS 2005.
Is this a SSRS 2005 bug? is there any other work arounds or suggestions?
I have parameters in my report. The user can choose the year, month and date (3 parameters). Now I want to set default vaules for the parameters , so that the user sees the report for example for the current day without selecting the parameters. I tried to set the type of the parameters to DateTime and the default value for example for the year to "=Today().Year" . But when I execute the report an error occures . Something like : no validValue for this parameter.
My Attributes for the year month and date are from an Analyis Services Cube from a Server Time dimension . Does somebody know how to make it possible to set default values for this parameters?
Other question :
Does somebody know how I can reduce the values for a parameter. For Example I have a parameter "year" from a server time dimension from a cube. The values which are available are "Year 2004", "Year 2005", "Year 2006", "Year 2007". But I want that the user only can choose "Year 2006" or "Year 2007" ant not every Year or "All". Or Other Example: The User should only choose a Date that is int the past or Today but not a Date in the future.
my dataset from sharepoint list. and this dataset value assign to parameter. i want when no any parameter is selected than it should filter like "ALL". when i select alow null value it give me prompt error you  can not select null in multivalue parameter.How can i do it. i am using share point list.
Does anyone know if this is possible right out of the box in SSRS 2005 against an OLAP data source?
I have several parameters. My second parameter is to be filtered based on the first parameter (kinda like cascading), but how do I do this against an OLAP data source? Lets say I have param1 and param2 in a dataset. I want Param2 to show the locations only based on what I select in Param1. Same but a little different: I have Parameter1 and then my second parameter (Param2) is a boolean (True/False). I want to show Parameter 3/Paramater 4 based on selection of Param2 (So, if true, show Param3, if false, show Param 4) and remember we are doing this in a sequence. Can you do this thru SSRS? Any help would be great. Thanks for your time in advance. Kent
Is it possible to fill a parameter list with values based on another parameter value? Here's what I have so far (which hasn't worked)... I'd like to generate a report listing information for a student. The report viewer would first select a school from the first drop-down menu, and then the second drop-down menu would populate with the list of students at that school. I have a dataset that calls a sp which returns a list of schools (SchoolID and SchoolName fields from the database table). I have another dataset that calls a sp (with SchoolID as the parameter) which returns a list of students for that school. Both datasets return the appropriate data when tested individually, but when I set up the Report Parameters and build the report, these errors come up... The value expression for the query parameter '@SchoolID' refers to a non-existing report parameter 'SchoolID'. The report parameter 'Student' has a DefaultValue or a ValidValue that depends on the report parameter "SchoolID". Forward dependencies are not valid. ...Is it possible for the reoprt to generate a list of available parameter values based on the value selected for another parameter? Any help you can give me would be great!! Thank you
I am using reporting services 2012, Can we make visibility of report parameter dynamic, ie can we make parameter visible or hide on certain condition or its visibility depends on other parameters Is this feature  available in any other updated version of ssrs?Â
I had thought that this was possible but I can't seem to figure out the syntax. Essentially I have a report where one of the parameters is populated by a stored procedure.
Right now this is easily accomplished by using "exec <storedprocname>" as the query string for the report parameter. However I am not clear if it is possible to now incorporate User!UserID as parameter to the stored procedure. Is it? Thanks
I would like to be able to adjust the multi-value property of a parameter based on the value of another parameter in my report. The controlling paramter would be binary with two options for Single or Multiple selection. I would like my parameter to default to multi-value, which I can do on the screen selection. I have tried to add an IIF statement to the XML code, with no success. Any ideas would be helpful.
I have a report parameter called para1 which is a drop-down list and what I want to do is display another report parameter based on the para1 selection.
So for example, para1 contains a, b, c choices. if a user selects b, I would like para2 to display but if the user selects a or c, I don't want the para2 to display.
Using SQL Server 2008R2 and Report Builder 3.0..I have an action set in a text box of a table. My intent is to pass the value of that text box (which is variable) to a sub-report in a popup window. Here's my code: URL....The parameter of the report I'm trying to open is @SONum.I'm guessing my error is involved in the formatting of how the value of the parameter is being passed. I've also seen examples where the report server and report values were parameterized, but I don't know where to define
Parameters!ServerAddress.Value anywhere.Do I need to have something set up a certain way within the report I'm opening? Here's the report Parameter settings on the report I'm trying to open.
I'll go to a dataset, open up the query designer, add a new parameter, then refresh the fields, but the parameter won't be added as a report parameter. If I go to the dataset properties under the list of parameters, the value in the dropdown will be blank. However, sometimes this will automatically add.Â
Is this a bug in Visual Studio? How do I get around this?Â
I want to set the default parameters for a function. I;d like to set the date start date to current date and end date for the last 90 days. how to make this work?
Create Function HR.Equipment ( @startdate Date =(Convert(Date,DATEADD(DAY,-1,GETDATE())), @enddate Date = (Convert(Date,@StartDate-90) ) RETURNS TABLE AS RETURN ( SELECT EquipID, EmpName, IssueDate FROM HR.Equipment WHERE IssueDate <=@StartDate and IssueDate >=@EndDate ) GO
After running my ssis pkg for some time with no problems I saw the following error come up, probably during execution of a stored procedure ...
An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The formal parameter "@ReportingId" was not declared as an OUTPUT parameter, but the actual parameter passed in requested output.".
I see some references to this on the web (even this one) but so far they seem like deadends. Doe anybody know what this means? Below is a summary of how the variable is used in the stored proc.
The sp is declared with 21 input params only, none of them is @ReportingId. It declares @ReportingId as a bigint variable and uses it in the beginning of the proc as follows...
Code Snippet select @ReportingId = max(ReportingId) from [dbo].[GuidToReportingid] where Guid = @UniqueIdentifier and EffectiveEndDate is null
if @ReportingId is null BEGIN insert into [dbo].[GuidToReportingId] select @UniqueIdentifier,getdate(),null,getdate() set @ReportingId = scope_identity() END ELSE BEGIN select @rowcount = count(*) from [dbo].[someTable] where ReportingId = @ReportingId and...lots of other conditions
...later as part of an else it does the following...
Code Snippet if @rowcount > 0 and @joinsMatch = 1 begin set @insertFlag = 0 end else begin update [dbo].[GuidToReportingId] set EffectiveEndDate = getdate() where ReportingId = @ReportingId insert into [dbo].[GuidToReportingId] select @UniqueIdentifier,getdate(),null,getdate() set @ReportingId = scope_identity() end
...and before the return it's value is inserted to different tables.