I am using a table to display a very large amount of data (a basic list of information) with groups (the group header repeats on each page). Each of the groups can span multiple pages, The problem I have is that in the printed mode (or PDF) the group title may show at the bottom of some pages with no details (there may not be enough space for a detail row) and then the heading repeats on the next with the detail. How do I prevent this widow problem?
This can be controled in Access and Brio but not here seems a little odd.
I have a 2000 remote server that polls the 6.5 server every 2 mins to check for access violation on the server via a query analyzer connection. It then uses xp_sendamil and net send for notifications.
The problem is, I've started to get loads of orphan connections from the remote server, which will not kill when attempted.
Any ideas, apart from stopping and starting sql service?
I have run a NOT EXISTS query comparing a table in test and production, to determine which records have been added to the table in production so I can import those records to test. The count(*) from both tables has a difference of 766 records but the query is showing 768. I am trying to find the easiest/quickest way to identify the orphan records.
Hi,Say, a database has all the FK constraints created properly, would sqlserver 2000 save this kind of meta data into sysforeignkeys table? Orit depends on ...?I'm trying to find all the orphen records in a given database via metadata.TIA.
Not sure if this is the correct place to ask. But it made sense to start here.
I have a legacy stored procedure that had been running under SQL2005 for some time correctly. Now it fails as it is trying to deal with user tables listed in the sys.objects view. The issue appears to be an individual table that no longer exists in the database but is still has a record visible from sys.objects. This entry is an orphan. My question is how do I remove the orphan record from sys.objects?
I have a VB program which uses ADODB.Connection to make connection to SQL Server DB. However, under some circumstances, orphan / ghost connections remain in DB even after the VB program closed.
Here are the facts...
(1) Windows Server 2000 + SQL Server 2000 - run the VB program and made connection to the DB, leave it for 3 minutes, the connection closes when the program closes. - run the VB program and made connection to the DB, leave it for 3 hours, the connection closes when the program closes.
(2) Windows Server 2003 + SQL Server 2000 - run the VB program and made connection to the DB, leave it for 3 minutes, the connection closes when the program closes. - run the VB program and made connection to the DB, leave it for 3 hours, the connection does not close even after the program is closed.
Does anyone know if there is any problem with Windows Server 2003 + SQL Server 2000 using ADODB.Connection? Or is there some kind of "timeout" parameter for which I can set to resolve such issue?
When expoting data from excel to sql server table, using SSIS package, after exporting is done, how would i check source rows are equal to destination rows. If not to throw an error message.
How can we handle transactions in SSIS 1. when some error/something happens during export and the # of rows are not exported fully to destination, how to rollback the transaction in SSIS.
When expoting data from excel to sql server table, using SSIS package, after exporting is done, how would i check source rows are equal to destination rows. If not to throw an error message.
I have a SQL script to insert data into a table as below:
INSERT into [SRV1INS2].BB.dbo.Agents2 select * from [SRV2INS14].DD.dbo.Agents
I just want to set a Trigger on Agents2 Table, which could delete all rows in the table , before carry out any Insert operation using above statement.I had below Table Trigger on [SRV1INS2].BB.dbo.Agents2 Table as below: But it did not perform what I intend to do.
USE [BB] GO /****** Object: Trigger Script Date: 24/07/2015 3:41:38 PM ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON
I have created a table Table with name as Varchar and id as int. Now i have started inserting the rows like, insert into Table values ('arun',20).Yes i have inserted a row in the table. Now i have got the values " arun's ", 50. insert into Table values('arun's',20) My sqlserver is giving me an error instead of inserting the row. How will you solve this problem?
Using the the NumId from TitleData, I would like to delete thecorresponding row in Bookdata using pure SQL. I want it to delete allrows in bookdata where the Titledata.NumID is a match to bookdata.idThe two tables are linked in that the NumId of table Titledata isidentical to the Id of table bookdata. I can, using ADO, loop thrudeleting one by one but I would like to do this in a pure SQLstatement. Is this possible? Any help is appreciated.I was thinking something like this way :"Delete from Bookdata where Titledata.NumID = Bookdata.id"But of course it will error.My current code is:(frmlogon.tablename is really Titledata)Dim rstry As New ADODB.RecordsetDim values As VariantSQLQuery = "Select Numid from " & frmLogon.TablenameSet rstry = frmLogon.cnConnection.Execute(SQLQuery)values = rstry.GetRowsSet rstry = Nothing'now loop thruDim xx As Integerxx = 0Do Until xx > UBound(values, 2)SQLQuery = "Delete from Bookdata where bookdata.Id = '" & values(0,xx) & "'"frmLogon.cnConnection.Execute (SQLQuery)xx = xx + 1Loop'create statements for 2 tables involved areconn.Execute "CREATE TABLE TitleData" & _"(Id INT IDENTITY (1, 1) NOT NULL PRIMARY KEY," & _"NumId INT DEFAULT 0 )"conn.Execute "CREATE TABLE BookData" & _"(Id INT IDENTITY (1, 1) NOT NULL," & _"Titles TEXT DEFAULT ''," & _"GeneralNote TEXT DEFAULT ''," & _"Author VARCHAR(100) DEFAULT ''," & _"Imprint VARCHAR(100) DEFAULT ''," & _"ISBN VARCHAR(100) DEFAULT ''," & _"Description VARCHAR(100) DEFAULT ''," & _"CallNumberPre VARCHAR(5) DEFAULT ''," & _"CallNumber VARCHAR(25) DEFAULT '',LOCNumber VARCHAR(30) DEFAULT '',"& _"Accession VARCHAR(25) DEFAULT ''," & _"Bibliography VARCHAR(100) DEFAULT ''," & _"Series VARCHAR(100) DEFAULT ''," & _"MyStatus VARCHAR(70) DEFAULT ''," & _"Barcode VARCHAR(50) DEFAULT ''," & _"LocalData VARCHAR(100) DEFAULT ''," & _"CheckoutPeriod VARCHAR(10) DEFAULT ''," & _"CatalogCard TEXT DEFAULT ''," & _"Summary TEXT DEFAULT ''," & _"MyCount VARCHAR(10) DEFAULT ''," & _"ItemDate DATETIME DEFAULT ''," & _"MyUser VARCHAR(50) DEFAULT ''," & _"MarcData TEXT DEFAULT ''," & _"SdlsRecord TEXT DEFAULT '', LOSC VARCHAR(5) DEFAULT '', LOSNDecimal(14,6) DEFAULT 0," & _"Edits Char(1) DEFAULT '', TitleDuplicate VARCHAR(50) DEFAULT '')"
Dear Friends, Is there any way to display a table data separately like odd rows and even rows?I dont know this is possible or not?If it is possible means how can i achieve it?Please guide me a proper way. Thanks all!
I have two tables that are related by keys. For instance,Table employee {last_name char(40) not null,first_name char(40) not null,department_name char(40) not null,age int not null,...}Employee table has a primary key (combination of last_name and first_name).Table address {last_name char(40) not null,first_name char(40) not null,street char(200) not null,city char(100) not null,...}Address table has a primary key (combination of last_name, first_name andstreet in which (last_name, first_name) reference (last_name, first_name) inemployee table.Now I want to delete some rows in Address table based on department_name inEmployee table. What is sql for this delete?I appreciate your help. Please ignore table design and I just use it for myproblem illustration.Jim
I am using stored procedure to load gridview but problem is that i am not getting all rows from first table[ Subject] on applying conditions on second table[ Faculty_Subject table] ,as you can see below if i apply condition :-
Faculty_Subject.Class_Id=@Class_Id
Then i don't get all subjects from subject table, how this can be achieved.
Sql Code:- GO ALTER Proc [dbo].[SP_Get_Subjects_Faculty_Details] @Class_Id int AS BEGIN
Table B: Name Data UserA xxx UserB asdasd UserB ewrsad UserC dsafasc UserA sdf UserB dfvr4
I want to count the total entries in Table B for every user in Table A. The output would be:
Name Count UserA 2 UserB 3 UserC 1
I can use a Select Count statement, but I will have to make a SQL call for every user in Table A. Also, Table A is dynamic, so the users are always changing. Can this be incorporated into one SQL call to count the total rows in Table B for each user in Table A?
i have 2 tables (both containing the same column names/datatypes), say table1 and table2.. table1 is the most recent, but some rows were deleted on accident.. table2 was a backup that has all the data we need, but some of it is old, so what i want to do is overwrrite the rows in table 2 that also exist in table 1 with the table 1 rows, but the rows in table 2 that do not exist in table one, leave those as is.. both tables have a primary key, user_id.
I write a insert trigger on my table LeaveRegister(1000 rows) and inserting rows in audit table, but when i inserting a row in LeaveRegister table. In audit table 1000 + 1 rows are inserting every time.
need help how to archiv table to another table with unique number for all rows once + date time (not the second only day time +minute) i need whan i insert to the another table add 2 more fields (unique number , date_time )
this is the table 1 i select from ID fname new_date val_holiday ----------------------------------------------------
this is the table 2 i insert into ---------------------------------- ID fname new_date val_holiday unique number date_time --------------------------------------------------------------------------------------------------------------------
for evry archiv table to another table (insert) i need to get a unique number + date time (not the second only day time +minute)
next insert ...... ID fname new_date val_holiday unique number date_time --------------------------------------------------------------------------------------------------------------------
next insert ...... ID fname new_date val_holiday unique number date_time --------------------------------------------------------------------------------------------------------------------
Here's the DB Connection code for a site (Web.config file) I was wondering how I could specify an idle timeout or orphan timeout. I tried idle timeout=x and kept getting errors
<add key="DBConn" value="server=localhost;Trusted_Connection=true;database=SaltwaterFishing;Min Pool Size=5;Max Pool Size=150;"></add>
I have one table that has unique id's associated with each row of information. I want to delete rows of information in one table that have a unique ID that references information in another table.
Here is a basic breakdown of what I am trying to do:
Table1 (the table where the rows need to be deleted from) Column_x (Holds the id that is unique to the various rows of data - User ID)
Table2 (Holds the user information & has the associated ID) Column_z (holds the User ID)
I tried this on a test set of tables and could not get it to work. What I am trying to do is skip all rows of Table1 that have ID's present in Table2, and delete the rows of ID's that are not present in Table2.
Code:
SELECT Column_z FROM dbo.Table2 DELETE FROM dbo.Table1 WHERE Column_z <> Column_x
This did not seem to do what I needed, it did not delete any rows at all.
I wanted it to delete all rows in Table1 that did not have a reference to a user ID that matched any ID's in Column_z of Table2
Then I tried another scenerio that I also needed to do:
Code:
SELECT Column_z, Column_a FROM dbo.Table2 DELETE FROM dbo.Table1 WHERE Column_z = Column_x AND Column_a='0'
'0' being the user id is inactive so I wanted to delete rows in Table1 and remove all references to users that were in an inactive status in Table2.
Neither one of the Queries wanted to work for me in the Query Analyzer when I ran them. It just said (0) rows affected.
I have a query which is quite complex. It's based on a set of data ina complex view which takes the data from several tables.In this complex query, if I allow the various parts of the query towork on the results of the view (MISView), it can take 15 minutes torun (eek !), however, if I create a temporary table with the data fromthe view and then use that for the remainder of the query, it runs inapprox 20 seconds.Now, I have examined the execution plan (my new favourite toy) andthere is a difference (as expected). However when looking at the partof the query that takes up most of the time, it shows that it bringsback 109,645,866 records from a table (Credit) that contains 13,002records. This table is one that is referenced in the view (MISView)which contains 13,653 records and does get some of it's data from thetable which is scanned (Credit).For the record, we don't have any tables with over 100,000 records in,so 109 million rows is going some for us. The part of the query thatruns slow does reference another copy of itself but this is necessaryfor the equation that is being run.Now I'm OK with why it's doing the table scan, but why does it bringback substantially more data than is in the table ? Is it somemultiple of the number of records that it's trying to work out. Iassume it tries to run a seperate plan for the view as part of it'sprocess.Ideally, I'm still going to go down the route of the temporary table,but I would like to understand more about what it does first as Idon't like leaving things unanswered.Any help would be appreciated.
I need Insert rows in the OrderDetails Table based on values in the Orders Table
In the Orders table i have a columns called OrderID and ISale. In the OrdersDetails i have columns called OrderID and SaleType
For each value in the OrderID Column of the Orders Table, anytime the ISale Column in the Orders table = 1, and the SalesType column in the OrderDetails table is empty, I want to add two rows in the OrderDetails table. One row with the value K and another row with the value KD. That is a row will be added and the value in the SalesType column will be K, also a second row will be added and the value in the SalesType column will be KD
Also for each value in the OrderID Column of the Orders Table, anytime the ISale Column in the Orders table = 0, and the SalesType column in the OrderDetails table is empty, I want to add two rows in the OrderDetails table. One row with the value Q and another row with the value QD That is a row will be added and the value in the SalesType column will be Q, also a second row will be added and the value in the SalesType column will be QD.
I'm working on a database for a financial client and part of what i need to do is calculate a value from two separate rows in the same table and insert the result in the same table as a new row. I have a way of doing so but i consider it to be extremely inelegant and i'm hoping there's a better way of doing it. A description of the existing database schema (which i have control over) will help in explaining the problem:
id metric_id metric_type_id metric_name 1 80 2 Fiscal Enterprise Value Historic Year 1 2 81 2 Fiscal Enterprise Value Current Fiscal Year 3 82 2 Fiscal Enterprise value Forward Fiscal year 1 4 83 2 Fiscal Enterprise Value Forward Fiscal Year 2 5 101 3 Calendar Enterprise value Historic Year 1 6 102 3 Calendar Enterprise Value Current Fiscal Year 5 103 3 Calendar Enterprise value Forward Year 1 6 104 3 Calendar Enterprise Value Forward Year 2
Table Name: metric_type_details
id metric_type_id metric_type_name 1 1 Raw 2 2 Fiscal 3 3 Calendar 4 4 Calculated
The problem scenario is the following: Because a certain number of the securities have a fiscal year end that is different to the calendar end in addition to having fiscal data (such as fiscal enterprise value and fiscal earnings etc...) for each security i also need to store calendarised data. What this means is that if security with security_id = 3 has a fiscal year end of October then using rows with ids = 1, 2, 3 and 4 from the metrics_ladder table i need to calculate metrics with metric_id = 83, 84, 85 and 86 (as described in the metric_details table) and insert the following 4 new records into metrics_ladder:
Metric with metric_id = 101 (Calendar Enterprise value Historic Year 1) will be calculated by taking 10/12 of the value for metric_id 80 plus 2/12 of the value for metric_id 81.
Similarly, metric_id 102 will be equal to 10/12 of the value for metric_id 81 plus 2/12 of the value for metric_id 82,
metric_id 103 will be equal to 10/12 of the value for metric_id 82 plus 2/12 of the value for metric_id 83 and finally
metric_id 104 will be NULL (determined by business requirements as there is no data for forward year 3 to use).
As i could think of no better way of doing this (and hence the reason for this thread) I am currently achieving this by pivoting the relevant data from the metrics_ladder so that the required data for each security is in one row, storing the result in a new column then unpivoting again to store the result in the metrics_ladder table. So the above data in nmetrics_ladder becomes:
-- Dummy year variable to make it easier to use MONTH() function -- to convert 3 letter month to number. i.e. JAN -> 1, DEC -> 12 etc... DECLARE @DUMMY_YEAR VARCHAR(4) SET @DUMMY_YEAR = 1900;
with temp(security_id, metric_id, value) as ( select ml.security_id, ml.metric_id, ml.value from metrics_ladder ml where ml.metric_id in (80,81,82,83,84,85,86,87,88,etc...) -- only consider securities with fiscal year end not equal to december and ml.security_id in (select security_id from company_details where fiscal_year_end <> 'dec') ) insert into @calendar_averages select temppivot.security_id -- Net Income ,(CONVERT(DECIMAL, MONTH(cd.fiscal_year_end + @DUMMY_YEAR))/12*[80]) +((12 - CONVERT(DECIMAL, MONTH(cd.fiscal_year_end + @DUMMY_YEAR)))/12*[81]) as [101] ,(CONVERT(DECIMAL, MONTH(cd.fiscal_year_end + @DUMMY_YEAR))/12*[81]) +((12 - CONVERT(DECIMAL, MONTH(cd.fiscal_year_end + @DUMMY_YEAR)))/12*[82]) as [102] ,(CONVERT(DECIMAL, MONTH(cd.fiscal_year_end + @DUMMY_YEAR))/12*[82]) +((12 - CONVERT(DECIMAL, MONTH(cd.fiscal_year_end + @DUMMY_YEAR)))/12*[83]) as [103] ,NULL as [104] -- Share Holders Equity ,(CONVERT(DECIMAL, MONTH(cd.fiscal_year_end + @DUMMY_YEAR))/12*[84]) +((12 - CONVERT(DECIMAL, MONTH(cd.fiscal_year_end + @DUMMY_YEAR)))/12*[85]) as [105] ,(CONVERT(DECIMAL, MONTH(cd.fiscal_year_end + @DUMMY_YEAR))/12*[85]) +((12 - CONVERT(DECIMAL, MONTH(cd.fiscal_year_end + @DUMMY_YEAR)))/12*[86]) as [106] ,(CONVERT(DECIMAL, MONTH(cd.fiscal_year_end + @DUMMY_YEAR))/12*[86]) +((12 - CONVERT(DECIMAL, MONTH(cd.fiscal_year_end + @DUMMY_YEAR)))/12*[87]) as [107] ,NULL as [108] -- Capex -- Sales -- Accounts payable etc... .. .. from temp pivot ( sum(value) for metric_id in ([80],[81],[82],[83],[84],[85],[86],[87],[88],etc...) ) as temppivot inner join company_details cd on temppivot.security_id = cd.security_id
********* END SQL *********
The result then needs to be unpivoted and stored in metrics_ladder.
And FINALLY, the question! Is there a more elegant way of achieving this??? I have complete control over the database schema so if creating mapping tables or anything along those lines would help it is possible. Also, is SQL not really suited for such operations and would it therefore be better done in C#/VB.NET.
PeopleID in People Table is the primarykey and foreign Key in PeopleCosts Table. PeopleID is an autonumber
The major fields in People Table are PeopleID | MajorVersion | SubVersion. I want to create a new copy of data for existing subversion (say from sub version 1 to 2) in the same table. when the new data is copied my PeopleID is getting incremented and how to copy the related data in the other table (PeopleCosts Table) with the new set of PeopleIDs..
ID Flag TestDate Value Comment 111 2 12/15/2014 7.5 null 222 2 Null 10 received
Matrix_Current table could have 1 or multiple rows as below.
ID Flag TestDate Value Comment 111 2 01/26/2015 7.9 111 2 02/23/2015 7.9 111 2 04/07/2015 6.8 222 1 null 8 test comment 1 222 3 null 9 test comment 2
When I run below update
UPDATE AM SET M.Flag = MC.Flag, M.TestDate = MC.TestDate, M.Value = MC.Value, M.comment = MC.Comment FROM dbo.Matrix M inner join dbo.Matrix_Current MC on M.ID = MC.ID
Matrix table has value below:
ID Flag TestDate Value Comment 111 2 01/26/2015 7.9 222 1 Null 8 test comment 1
I want to update Matrix table from all row from Matrix_Current, final table would like below:
ID Flag TestDate Value Comment 111 2 04/07/2015 6.8 222 3 Null 9 test comment 2
