I have a view that is involved in an import. Sometimes the import will fail with the following error:
Msg 242, Level 16, State 3, Line 2
The conversion of a varchar data type to a datetime data type resulted in an out-of-range value.
I can recreate the error just from selecting from the view. Why would something be converting when just selecting from view?
A colleague of mine has a view that returns approx 100000 rows in about 60 seconds.
He wants to use the data returned from that view in an OLE DB Source component.
When he selects the view from the drop-down list of available tables then SSIS seems to hang without any data being returned (he waited for about 15 mins).
He then changed the OLE DB Source component to use a SQL statement and the SQL statement was: SELECT * FROM <viewname>
In this instance all the data was returned in approx 60 seconds (as expected).
This makes no sense. One would think that selecting a view from the drop-down and doing a SELECT *... from that view would be exactly the same. Evidently that isn't the case.
Can anyone explain why?
Thanks
-Jamie
I have created a view where the data is a subset of the table. When a non dbo user selects only the first column from that view, the query returns the value. However, when the non dbo user selects any of the other columns or a combination of columns I get an invalid column name error. The syntax of my query is correct because it works when I use QA using a login with dbo permissions. Ideas?
Any help would be appreciated.
I have created the view below, when I highlight the select statement in QA it works fine, but when I try to access the view I get back 0 records!
ie:
select * from Email_All
It believe its something to do with the last not in section:
EmailsAddresses.Email not in (
if I comment it out everything works fine!
does not make any sense...anyone have any clues?
they are all views except the EmailSubscriptions table.
-------------------------------------------
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER VIEW [dbo].[Email_All]
AS
select * from
(
--SHELBY
select * from hcf..HM_EmailAddressShelby
union all
--KMS
select * from hcf..HM_EmailAddressKmai
union all
--EMAIL SUBSCRIPTIONS
select * from hcf..HM_EmailAddressWeb
where id in (select distinct id from hcf.dbo.EmailSubscriptions where List = 'PeriodicEmailsFromGreg' and status = 1)
) as EmailsAddresses
where
ltrim(rtrim(isnull(EmailsAddresses.Email,''))) <> ''
and
EmailsAddresses.Email not in (
select Email from hcf..ShelbyIdEmailSkip --OFF list SHELBY
union
select Email from hcf..KmaiIdEmailSkip --OFF list KMAI
union
select Email from hcf..EmailSubscriptions where List = 'PeriodicEmailsFromGreg' and status = 0 --OFF list PERIODIC FROM GREG
)
GO
SET ANSI_NULLS OFF
GO
SET QUOTED_IDENTIFIER OFF
GO
I am having a problem with indexes on specific tables. For some reasona query that runs against a view is not selecting the correct index ona table. I run the same query against the table directly and it looksfine. Can anyone give me some insight? Thanks.PRODUCTION1:CREATE TABLE MyTest1 (ID INT IDENTITY(1,1), COLUMN1 CHAR(10), COLUMN2CHAR(10))CREATE CLUSTERED INDEX IDX_MyTest1 ON MyTest1 ON (ID)CREATE NONCLUSTERED INDEX IDX_MyTest2 ON MyTest1 ON (COLUMN2, ID)ARCHIVE1:CREATE TABLE MyTest1 (ID INT IDENTITY(1,1), COLUMN1 CHAR(10), COLUMN2CHAR(10))CREATE CLUSTERED INDEX IDX_MyTest1 ON MyTest1 ON (ID)CREATE NONCLUSTERED INDEX IDX_MyTest2 ON MyTest1 ON (COLUMN2, ID)REPORTDB:CREATE VIEW MyTest1 ASSELECT ID, COLUMN1, COLUMN2 FROM PRODUCTION1..MyTest1UNION ALLSELECT ID, COLUMN1, COLUMN2 FROM ARCHIVE1..MyTest1While in PRODUCTION1:SELECT ID, COLUMN2 FROM MyTest1 WHERE COLUMN2 = 'Testing'--> Clustered index seek PRODUCTION1..IDX_MyTest2--> Results returnedWhile in ARCHIVE1:SELECT ID, COLUMN2 FROM MyTest1 WHERE COLUMN2 = 'Testing'--> Clustered index seek ARCHIVE1..IDX_MyTest2--> Results returnedWhile in REPORTDB:SELECT ID, COLUMN2 FROM MyTest1 WHERE COLUMN2 = 'Testing'--> Index seek PRODUCTION1..IDX_MyTest2--> Bookmark lookup PRODUCTION1..IDX_MyTest1--> Index seek ARCHIVE1..IDX_MyTest2--> Bookmark lookup ARCHIVE1..IDX_MyTest1--> Concatenate data and results returned
View 3 Replies View RelatedI moved this from another forum because it seems more related to replication the longer I look into it!
The following code often dies on a deadlock. I have also seen "Spid x blocked by Spid x", where x is the spid of this connection. The view selects from several tables and some other views as well, and many of the underlying tables are being updated by replication. I have seen cases where the replication Insert proc participated in the deadlock, and the table being inserted into is joined twice in the view, suggesting that somehow this
causes the deadlock or makes a deadlock more likely?
SELECT * INTO dbo.tbl_stg_LoansMarketingFirstBorrower
FROM view_loans_marketing_first_borrower OPTION (MAXDOP 1)
I do not understand how selecting from a view can cause a deadlock with a
proc which does not reference tbl_stg_LoansMarketingFirstBorrower. Any
suggestions on how to diagnose this? I used (1204) to identify the proc and underlying table.
Thanks a bunch.
Hello All,
I know nothing.
I am helping a friend, current database Paradox 7.x, custom app as I am sure they all are. I wanted to convert this DB to SQL or Access(MS)I do not have Access, but I have SQL 2000. I used the import/ convert tools within SQL, looked good to me, no errors etc.
I thought life was good. Now try to view, look at the data the way
users could. In the SQL manager, I can see tables, and stored procs, and lotsa cool stuff. I try and install SQL client on a PC to view. It basically extends the Admin tools to the deskop PC. How do I use an SQL conversion to realize the needs of the user interface. I think I need what is called a front end. You can stop laughing now.....
Anyway what direction should I take
to update this antique, no support Paradox DB.
Thanks, Dan T
i have a weird situation here, i tried to load a unicode file with a flat file source component, one of file lines has data like any other line but also contains the character "ÿ" which i can't see or find it and replace it with empty string, the source component parses the line correctly but if there is a data type error in this line, the error output for that line gives me this character "ÿ" instead of the original line.
simply, the error output of flat file source component fail to get the original line when the line contains hidden "ÿ".
i hope you can help me with issue.
Thanks in advance.
here is my code the falue of pr_h_reqby is "Test"
Dim strconn As New SqlConnection(connstring)
Dim myReqdata As New DataSet
Dim mycommand As SqlDataAdapter
Dim sqlstr As String = "select pr_H_reqby from tbl_pr_header where pr_h_recid = " & recid & ""
mycommand = New SqlDataAdapter(sqlstr, strconn)
mycommand.Fill(myReqdata, "mydata")
If myReqdata.Tables(0).Rows.Count > 0 Then
'lblReqID.Text = myReqdata.Tables(0).Rows("reqid").ToString
lblNameVal.Text = myReqdata.Tables("mydata").Rows("pr_H_reqby").ToString()
lblEmailVal.Text = myReqdata.Tables("mydata").Rows("pr_h_reqemail").ToString()
lblReqDateVal.Text = myReqdata.Tables("mydata").Rows("pr_h_reqdate").ToString()
lblneedval.Text = myReqdata.Tables("mydata").Rows("pr_h_needdt").ToString()
lblDeptval.Text = myReqdata.Tables("mydata").Rows("pr_h_dept").ToString()
txtbxReqDesc.Text = myReqdata.Tables("mydata").Rows("pr_h_projdesc").ToString()
End If
I've got a big problem that I'm trying to figure out:
I have an address table out-of-which I am trying to select mailing addresses for companies UNLESS a mailing address doesn't exist; then I want to select the physical addresses for that company. If I get multiple mailing or physical addresses returned I only want the most recently edited out of those.
I don't need this for an individual ID select, I need it applied to every record from the table.
My address table has some columns that look like:
[AddressID] [int]
[LocationID] [int]
[Type] [nvarchar](10)
[Address] [varchar](50)
[City] [varchar](50)
[State] [char](2)
[Zip] [varchar](5)
[AddDate] [datetime]
[EditDate] [datetime]
AddressID is a primary-key non-null column to the address table and the LocationID is a foreign key value from a seperate Companies table.
So there will be multiple addresses to one LocationID, but each address will have it's own AddressID.
How can I do this efficiently with perfomance in mind???
Thank you in advance for any and all replies...
I want to run a query that selects rows from the table where a datetime column has null values;
select * from Orders where IsNull(dClosedDate,'Null') = 'Null'
However i get this error:
Conversion failed when converting datetime from character string.
Any help appreciated
Can anyone help?
When I select the database and right click. I receive the following error:
Cannot show requested dialog
Additional Information:
Cannot show requested dialog (sqlMgmt)
Property Owner is not available for Database '[DB_name]'. This property may not exist for this object,
or may not be retrievabledue to insufficient access rights. (Microsoft.SqlServer.Smo)
I am using SQL server 2005.
I have a select statement which has to convert some date fields stored
as varchar based on critera of adding numbers to the date. What I have below
will return data show below but gives me an error message when it encounters
any data with null in the field. Is there something wrong in my conversion?
Thanks
declare @tdate varchar(10)
declare @rldate datetime
select @tdate = 20000630
select @rldate = @rldate + 2
select patient_.df_admit_date, patient_.df_ppdb_date from patient_
where (convert(datetime, df_ppdb_date, 101)+ 12) >= @tdate or
(convert(datetime, df_admit_date, 101) + 2 ) >= @tdate
19980910 20000626
19981215 20000627
19590114 20000621
20000629 NULL
20000706 NULL
20000711 NULL
(6 row(s) affected)
Server: Msg 242, Level 16, State 3, Line 5
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
Hi,I keep getting the error:System.Data.SqlClient.SqlException: Conversion failed when converting the varchar value '@qty' to data type int. When I initiate the insert and update.I tried adding a: Convert.ToInt32(TextBox1.Text), but it didn't work.. I also tried fiddling with the update code, but I think it is to do with the insert bool as the update works at the moment.. Could someone help?My code:private bool ExecuteUpdate(int quantity){ SqlConnection con = new SqlConnection();
con.ConnectionString = "Data
Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\ASPNETDB.MDF;Integrated
Security=True;User Instance=True"; con.Open(); SqlCommand command = new SqlCommand(); command.Connection = con; TextBox TextBox1 = (TextBox)FormView1.FindControl("TextBox1"); Label labname = (Label)FormView1.FindControl("Label3"); Label labid = (Label)FormView1.FindControl("Label13"); command.CommandText = "UPDATE Items SET Quantityavailable = Quantityavailable - '@qty' WHERE productID=@productID"; command.Parameters.Add("@qty", TextBox1.Text); command.Parameters.Add("@productID", labid.Text); command.ExecuteNonQuery(); con.Close(); return true;} private bool ExecuteInsert(String quantity) { SqlConnection con = new SqlConnection();
con.ConnectionString = "Data
Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\ASPNETDB.MDF;Integrated
Security=True;User Instance=True"; con.Open(); SqlCommand command = new SqlCommand(); command.Connection = con; TextBox TextBox1 = (TextBox)FormView1.FindControl("TextBox1"); Label labname = (Label)FormView1.FindControl("Label3"); Label labid = (Label)FormView1.FindControl("Label13");
command.CommandText = "INSERT INTO Transactions
(Usersname,Itemid,itemname,Date,Qty) VALUES
(@User,@productID,@Itemsname,@date,@qty)"; command.Parameters.Add("@User", System.Web.HttpContext.Current.User.Identity.Name); command.Parameters.Add("@Itemsname", labname.Text); command.Parameters.Add("@productID", labid.Text); command.Parameters.Add("@qty", Convert.ToInt32(TextBox1.Text)); command.Parameters.Add("@date", DateTime.Now.ToString()); command.ExecuteNonQuery(); con.Close(); return true; }protected void Button2_Click(object sender, EventArgs e){ TextBox TextBox1 = FormView1.FindControl("TextBox1") as TextBox; ExecuteUpdate(Int32.Parse(TextBox1.Text) );}protected void Button2_Command(object sender, CommandEventArgs e) { if (e.CommandName == "Update") { TextBox TextBox1 = FormView1.FindControl("TextBox1") as TextBox; ExecuteInsert(TextBox1.Text); } } Thanks so much if someone can!Jon
Please help.I have an aspx page with a drop down list(ddlCategories), and a datalist(dlLinks). The drop down lists data property is a uniqueidentifier from a table.When an item in the list is selected it fires the following:SqlLinks.SelectParameters("CategoryID").DefaultValue = ddlCategories.SelectedValuedlLinks.DataBind()The sqldatasource for the datalist runs a stored procedure (below)sp_GetLinks (@CategoryID ?) ASselect * from links where category = @categoryMy question is, what should @Category be declared as if the category column in the table is a uniqueidentifier? And what conversion do I need to do I just can't work it out, as I keep getting the following error:Implicit conversion from data type sql_variant to uniqueidentifier is not
allowed. Use the CONVERT function to run this query. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: Implicit conversion from data type
sql_variant to uniqueidentifier is not allowed. Use the CONVERT function to run
this query.Source Error:
Line 5: Protected Sub DropDownList1_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles ddlCategories.SelectedIndexChangedLine 6: SqlLinks.SelectParameters("CategoryID").DefaultValue = ddlCategories.SelectedValueLine 7: dlLinks.DataBind()Line 8: End SubLine 9: End ClassSource File:
C:Documents and SettingsKarl WallsMy DocumentsMy
WebsAFRAlinks.aspx.vb Line: 7 Stack Trace:
[SqlException (0x80131904): Implicit conversion from data type sql_variant to uniqueidentifier is not allowed. Use the CONVERT function to run this query.] System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +177 System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +68 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +199 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +2305 System.Data.SqlClient.SqlDataReader.ConsumeMetaData() +31 System.Data.SqlClient.SqlDataReader.get_MetaData() +62 System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) +294 System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +1021 System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +314 System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) +20 System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) +107 System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior) +10 System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior) +7 System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +139 System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +139 System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83 System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1659 System.Web.UI.WebControls.BaseDataList.GetData() +53 System.Web.UI.WebControls.DataList.CreateControlHierarchy(Boolean useDataSource) +267 System.Web.UI.WebControls.BaseDataList.OnDataBinding(EventArgs e) +56 System.Web.UI.WebControls.BaseDataList.DataBind() +62 links.DropDownList1_SelectedIndexChanged(Object sender, EventArgs e) in C:Documents and SettingsKarl WallsMy DocumentsMy WebsAFRAlinks.aspx.vb:7 System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +75 System.Web.UI.WebControls.DropDownList.RaisePostDataChangedEvent() +124 System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +7 System.Web.UI.Page.RaiseChangedEvents() +138 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4507
This is the error message I get: :(
Server: Msg 242, Level 16, State 3, Line 1
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
This is the query:
Select Qual_ins.CompanyCode, Qual_ins.ParticipantCode, Qual_ins.Ins_Code, Qual_ins.Plan_Code,
dbo.PremiumRate(Qual_Ins.Crit,Qual_Ins.PQB_Spec,Pl an_Mas.Extend_Fee,
Qual_Ins.Adjpremium,Qual_Ins.Adjpremiumper,Qual_In s.Adjpremend,
GetDate(),Qual_Ins.Cover_Amt, Plan_Mas.CR_A, Plan_Mas.CR_B,
Plan_Mas.CR_C, Plan_Mas.CR_D, Plan_Mas.CR_E, Plan_Mas.CR_F,
Plan_Mas.CR_G, Plan_Mas.CR_H, Plan_Mas.CR_I, Plan_Mas.CR_J,
Plan_Mas.CR_K, Plan_Mas.CR_L, Plan_Mas.CR_M, Plan_Mas.CR_N,
Plan_Mas.CR_O) AS PremiumRate
FROM Qual_ins, Plan_Mas
WHERE Qual_Ins.CompanyCode = 'ACME'
AND Qual_ins.ParticipantCode = 4
AND Plan_Mas.CompanyCode = Qual_ins.CompanyCode
AND Plan_Mas.Ins_Code = Qual_ins.Ins_Code
AND Plan_Mas.Plan_Code = Qual_ins.Plan_Code
Order BY Qual_ins.Ins_Code
Please let me know if you need to see my PremiumRate (User Defined Function) in order to help me elimate this error message.
Any help is appreciate!
I'm new to this.... "Hello" to all!
Shuvi
I have a dts package that imports data from a comma delimited .csv file.
I'm getting a conversion invalid for datatypes on column pair 1 (source 'col0012' (DBTYPE_STR), destination column 'latitude' (DBTYPE_R8)).
So, the source file is populated as a string for 'col002' and I have that field specified as a float within my table. Float is the correct type for the value.
How can I make the conversion correctly during the dts execution.
Thank you.
Using SQL 2005. Getting the following error. Using a cursor to update a table. I need to pass through the table two different times. The fields in the table update fine on the first time through, but on the 2nd time through I get the following error:
Conversion failed when converting datetime from character string.
Thank you for your help. David
FETCH NEXT FROM DEQ INTO
@GRGR_ID,
@SGSG_ID,
@SBSB_ID,
@PASS1_GENERATION_DATE,
@PASS1_TOTAL_AMOUNT_DUE,
@STATUS_FLAG,
@STATUS_FLAG_INSERT_DT
WHILE @@FETCH_STATUS = 0
BEGIN
UPDATE dbo.RPT_DELINQUENCY_TEST
SET PASS1_GENERATION_DATE = GETDATE()
WHERE SBSB_ID=@SBSB_ID AND GRGR_ID=@GRGR_ID
UPDATE dbo.RPT_DELINQUENCY_TEST
SET STATUS_FLAG = 'B'
WHERE SBSB_ID=@SBSB_ID AND GRGR_ID=@GRGR_ID
UPDATE dbo.RPT_DELINQUENCY_TEST
SET STATUS_FLAG_INSERT_DT = GETDATE()
WHERE SBSB_ID=@SBSB_ID AND GRGR_ID=@GRGR_ID
FETCH NEXT FROM DEQ INTO
@GRGR_ID,
@SGSG_ID,
@SBSB_ID,
@PASS1_GENERATION_DATE,
@PASS1_TOTAL_AMOUNT_DUE,
@STATUS_FLAG,
@STATUS_FLAG_INSERT_DT
END
Hi, can anyone please shed some light on this error:
[OLE DB Destination [466]] Error: There was an error with input column "Price" (518) on input "OLE DB Destination Input" (479). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
The column "price" is a numeric (9)
In the flat file connection manager, the datatype for the price column is a float [dt r4]. I've also tried numeric, etc.
How do I resolve this error?
Thanks much
Hi all,
Basically I am trying to create a package that will
(A) Create a table with specified datatypes
(B) Use a text Source file for the data
(C) on Success Completion of the "Execute SQL" transform the data from the text into the table.
Connect to DB <-- [TRANSFROM]-- Text (Source) <-- Execute SQL (Create Table)
It all seems to work now but when I run the package I get the following error
The number of failing rows exceeds the maximum specified.
TransformCopy 'DTSTransformation_6'conversion error: Conversion invalid for datatypes on column on pair 1 (source column 'Col007' (DBTYPE_STR),destination column 'Rec_Amt' (DBTYPE_CY)).
But when I go into the TransformDataTask, under transformation and test that column it all works fine, infact I tested all the columns and they all seem to work fine.
It also seems to be creating the same table twice first in the " Execute SQL" task and then again for some reason in the "DataTransform" task. I dont know if that is realted to the problem or not though.
Any idea's or suggestions I could try ?
Im very new to SQL 2000 & DTS so dont rule out any very newbie errors :)
Thanks
Hi,
I am getting the following error when
executing the ExecuteInsert in the code below..:
Conversion failed when converting
datetime from character string.
private bool
ExecuteInsert(String quantity)
{[snip]
con.Open();
SqlCommand command = new SqlCommand();
command.Connection = con;
TextBox TextBox1 =
(TextBox)FormView1.FindControl("TextBox1");
Label 1 = (Label)FormView1.FindControl("Label3");
Label 2 = (Label)FormView1.FindControl("Label13");
command.CommandText = "INSERT INTO Transactions (etc,Date,etc)
VALUES (etc,@date,@etc)";
command.Parameters.AddWithValue([snip]);
command.Parameters.AddWithValue([snip]); command.Parameters.AddWithValue("@date",
DateTime.Now.ToString());
command.Parameters.AddWithValue([snip]);
command.Parameters.AddWithValue([snip]);
command.ExecuteNonQuery();
con.Close();
command.Dispose();
return true; } protected
void Button2_Click(object sender, EventArgs e)
{ TextBox TextBox1 =
FormView1.FindControl("TextBox1") as TextBox;
bool retVal = ExecuteUpdate(Int32.Parse(TextBox1.Text));
if (retVal)
Response.Redirect("~/URL/EXTENSION.aspx");
Insert(); } private
void Insert() {
TextBox TextBox1 = FormView1.FindControl("TextBox1") as
TextBox;
ExecuteInsert(TextBox1.Text); }} Thanks if someone can help!Jon
I have a function that retrieves a data set from a passed SQL string. I'm getting this weird error.
Input string was not in a correct format
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.FormatException: Input string was not in a correct format.
Source Error:
Line 205: sSQL = "Select * From LedgerDetails Where LedgerID = " & _LedgerID.ToString()
Line 206: msgbox(sSQL)
Line 207: TransactionDetails = GetDataSet(sSQL)
Line 208:
Line 209: _TransactionsIndex = CShort(Val(GetDataValue("Select Count() From LedgerDetails Where LedgerID = " & CStr(_LedgerID)))) -1
Source File: C:Documents and SettingsOwnerMy DocumentsUniversityFall 2004DSSASP WorkAlgorithmTest.aspx Line: 207
Stack Trace:
[FormatException: Input string was not in a correct format.]
Microsoft.VisualBasic.CompilerServices.DoubleType.Parse(String Value, NumberFormatInfo NumberFormat) +184
Microsoft.VisualBasic.CompilerServices.IntegerType.FromString(String Value) +96
[InvalidCastException: Cast from string "Select * From LedgerDetails Wher" to type 'Integer' is not valid.]
Microsoft.VisualBasic.CompilerServices.IntegerType.FromString(String Value) +211
I have no idea why, but it seems to trying to convert the string into an integer. Both the argument and the parameter in the function are strings. I checked on the internet and the usual response is this is because the SQL is incomplete, but I have it showing me the compiled SQL string, and it is not imcomplete. I've tried hotwiring the query to match something I know will work, and I still get the same error. I've also tried compile the string using .ToString() on my number portion, storing the converted number into a string and only combining strings on the call, using another string variable as a temporary holder, using the String.Concat function, and even CStr. There is no way possible that this thing is an integer when the call is sent...
Any ideas?
Shawn
I'm trying to create a jbo to run in SQL that will update my table DeviationMaster in crcwebauth table, with the value from qvqote in table invoice_tbl in database crcbrio...I get an error in the job that says...SQLSTATE 42000 Error 8114 Error converting data type varchar to numericThe field DNumber in the DeviationMaster table is numeric 9, and qvqote is char 6.I know about the cast/convert, but I havent been able to successfully do this. I was hoping someone could show me how to get around this problem.Here is my current SQL statement that triggers the above error:update crcwebauth.dbo.deviationmaster set ldate = (select max(qvdate) from crcbrio.dbo.invoice_tbl where DNumber = qvqote)
View 11 Replies View RelatedCan someone please help me.
I am running a 'simple' stored procedure from the Query Analyser (command - FindCustomer L18239, [ ]) which should return a name from a customer table from the input id. It does return the name but I keep getting the message
'Server: Msg 245, Level 16, State 1, Procedure FindCustomer, Line 9
Syntax error converting the varchar value 'Kevin ' to a column of data type int.' - Any ideas what I've done wrong?, thanks.
Kevin.
stored-proc (FindCustomer)-
CREATE PROCEDURE FindCustomer
(@CustID [char](30),
@CustName [char](15) OUTPUT)
AS
BEGIN
SELECT @CustName = (SELECT FirstName from Customer where CustId = @CustID)
RETURN @CustName
END
I am using DTS to import a DB2 table from the mainframe and export the table in text format to a shared folder. I want to convert two fields to a date format yyyy-mm-dd. RELSE_Date is in this format and Updtts is a timestamp coming from the mainframe. The text file is all vchar. In dts here is my query pulling from the mainframe
SELECT A.PROD_ORDER_NUMBER, A.DYE_SEQUENCE, A.STYLE,
A.COLOR, A.SIZE, A.STATUS_IND, A.STATUS_CODE,
A.QUANTITY_REC_DC, B.SHIP_OTFQ_QTY,
A.MRP_PACK_CODE, A.LABELS_PRINTED,
date(A.RELSE_DATE) as RELSE_DATE,
date(A.UPDTTS) as UPDtts, A.LOCATION
FROM DB2.WP1_PO_CUST_REQ A,
DB2.WP1_DYE_LOT_REQ B
WHERE A.PROD_ORDER_NUMBER = B.PROD_ORDER_NUMBER
AND A.DYE_SEQUENCE = B.DYE_SEQUENCE
AND A.STYLE = B.STYLE
AND A.COLOR = B.COLOR
AND A.SIZE = B.SIZE
AND (A.PROD_ORDER_NUMBER LIKE '__K____')
When I parse the query it accepts it. When I run the DTS I get an error stating (SQL STATE 220077 SQLCODE -180) The sting representation of a datetime value has invalid syntax. Does anyone have a suggestion on how to convert these fields before the text file is exported or another output format that is similar to .dat in comma delimited format? Thank you.
Why am I getting the following error during a SQL Server 6.5 conversion?
##### Monday, April 09, 2001 - 21:06:36 #####
LOGINSID: Unable to open SQL Server registry key
Hi,
New to the forum here, it seems like this is a good SQL Server resource...
I'm still somewhat in the learning phases of T-SQL coding, and so far what I've learned has been pretty beneficial...a problem i'm having at the moment though, is with some conversion. I created a stored procedure that basically takes all the records from one table to another. I'll paste the code onto here and show you what's flagging on me (comment about the error within code). It probably seems a bit convoluted, but the UserProfileValue table is something that I TOTALLY wish Microsoft had second-guessed (it's from SharePoint Portal Server 2003)
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
GO
ALTER procedure profile_ImportUserProfileData
as
declare profile_curs cursor for
select UserProfileValue.RecordID, UserProfileValue.PropertyID, UserProfileValue.PropertyVal, PropertyList.PropertyName, PropertyList.DataType
from PropertyList
inner join UserProfileValue
on PropertyList.PropertyID = UserProfileValue.PropertyID
order by UserProfileValue.RecordId,
UserProfileValue.PropertyId
declare @RecordId int, @PropertyId int, @OldRecordId int
declare @PropertyVal sql_variant
declare @PropertyName nvarchar(20), @DataType nvarchar(20)
declare @table nvarchar(25)
set @table = 'UserProfileReportTable'
open profile_curs
fetch next from profile_curs into @RecordId, @PropertyId, @PropertyVal, @PropertyName, @DataType
if (@@fetch_status = -1)
begin
print 'End of table'
close profile_curs
deallocate profile_curs
return
end
while (@@fetch_status = 0)
begin
SET IDENTITY_INSERT UserProfileReportTable ON
insert UserProfileReportTable(RecordId)
values(@RecordId)
SET IDENTITY_INSERT UserProfileReportTable OFF
set @OldRecordId = @RecordId
fetch next from profile_curs into @RecordId, @PropertyId, @PropertyVal, @PropertyName, @DataType
if @DataType like 'nvarchar'
set @DataType = @DataType + '(20)'
while (@RecordId = @OldRecordId)
begin
declare @sql nvarchar(1000)
set @sql = 'update ' + @table
-- this next line is the one that's crapping out, saying "Incorrect syntax near @DataType"
set @sql = @sql + ' set ' + @PropertyName + ' = ' + convert(@DataType, @PropertyVal)
set @sql = @sql + ' where RecordId = ' + @RecordId
execute sp_executesql @sql
fetch next from profile_curs into @RecordId, @PropertyId, @PropertyVal, @PropertyName, @DataType
end
end
close profile_curs
deallocate profile_curs
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
I also tried cast(@PropertyVal as @DataType) but got the same results. I know it probably isn't the best idea to use a cursor, considering there are 3000+ records in UserProfileValue, but more than likely this procedure will only be run once, and I couldn't think of any better way to do it. Any help would be appreciated.
Thanks!
I'm importing data from a text table, into a temp table, and then on to a final working table. I'm running into difficulty converting data from text into a 'datetime' format. I'm getting the following error:
"Arithmetic overflow error" when trying to convert into a column with the data type "DateTime"
I half expected it to reject all conversions into a Date format because of the source file being in text format, but it allows this conversion in other columns.
If I switch the Data type to 'nvarchar' instead of 'datetime' it converts and pops up with a date format.
My question is: Will this nvarchar that looks like a date behave like a date? For example, if someone tries to perform a calculation with a date format, will the nvarchar suffice, or would it cause problems?
Any ideas?
Hello to all,
We've been running into this problem and it is becoming very urgent and critical to resolve it.
I am running a package called "Inventory", using a system (for both commercial and accounting operations, called "Sage") having "CBase" as database.
When we run the package to given date parameter "To Date", let's say "18/03/2008", it runs successfully.
However, when we run it to "31/03/2008", we got a error message (the message is translated from french), as following:
Simba ODBC Driver:
Error in a predicate
Conversion error into date type
Backup Memory pool invoked. Please report this error to customer support.
I will really appreciate any hint or feedback, helping me to resolve this issue.
Thank you in advance.
Leïla
hi guys,
i am passing date value from a textbox in c# and asp.net.
i am calling an sql procedure .
The result is binding to a datagrid.
my sql procedure is like this
create procedure searchComplaintdetails
(
@FirstName nvarchar(50),
@DueDate DateTime
)
as
DECLARE @SQL varchar(5000)
SET @SQL = 'select Customers.CustomerFirstName as Name,ComplaintLog.LogDate,ComplaintLog.LogID,
ComplaintLog.ComplaintStatus,ComplaintLog.DueDate,ComplaintCategories.CategoryName from ComplaintLog
Join ComplaintCategories on ComplaintLog.CategoryID=ComplaintCategories.CategoryID
join Customers on ComplaintLog.CustomerID=Customers.CustomerID
where ComplaintLog.IsActive=1'
IF Datalength(@FirstName)>0
SET @SQL = @SQL + ' AND Customers.CustomerFirstName LIKE ''' + @FirstName + '%'''
IF Datalength(@DueDate)>0
SET @SQL = @SQL + ' AND Convert(DateTime(10),ComplaintLog.DueDate,101) = '+@DueDate + ' '
EXEC (@SQL)
GO
my error is Syntax error converting datetime from character string.
if i pass nothing in test boxit will show another error
SqlDateTime overflow. Must be between 1/1/1753 12:00:00 AM and 12/31/9999 11:59:59 PM.
I am getting an issue when I am using a stored proc from a view.
I am to returning values, one being a varchar(50).
When I run the view, the values for this column and all others are returned fine.
When I run the stored procedure, the following error is shown:
Conversion failed when converting the varchar value 'ejoy' to data type int.
All other values return fine bar this one column and as I said its already a varchar in the table so I don't know why sql server (2005) thinks I want to convert it, I don't and at no point have tried to.
Below is my query statement
quote:SELECT u.User_fname, pv.PV_address, p.Start_monitoring, p.Last_monitoring, p.Period_of_monitoring, m.Ongoing_maintenance,
m.Savings_for_inverter_replacement, m.Monitoring, m.Total_anual_maint_and_monitor
FROM PerformanceData p, MonitoringCost m, Photovoltaic pv, Users u
WHERE p.Performance_id=m.MonitoringCost_id and
pv.PV_id=p.Performance_id and
pv.PV_id=m.MonitoringCost_id and
u.User_id =p.Performance_id and
u.User_id =pv.PV_id and
u.User_id = m.MonitoringCost_id
This error has been displayed
quote:Conversion failed when converting the varchar value 'ejoy' to data type int.
Any ideas much appreciated...
Hi,
I keep getting this conversion error when I run this query: If I comment from the second part of the where clause it goes away? I can't figure out how to fix this!
Msg 245, Level 16, State 1, Line 1
Conversion failed when converting the varchar value 'B' to data type int.
Select sE.SSN,
sE.enroll_yyyyQ_Code,
sE.Sched_Switch,
sE.gdb_Switch,
sE.Fee_Switch,
sE.Rank_Code,
sE.Class_Code,
sE.Status_Code,
sE.Prim_Coll_Code,
sE.Secondary_Coll_Code,
sE.Dept_Major_Code,
sR.Client_ID,
sR.Contact_Number,
master.dbo.fn_InitCap(nM.last_name) Last_Name,
master.dbo.fn_InitCap(nM.first_name) First_Name,
master.dbo.fn_InitCap(nM.mid_name) Middle_Name,
nM.sfx_name,
eA.Published_eMail_Address
/* Tables ................................................................ */
From FCoBDB.Student_Current.dbo.enrollment sE With ( noLock )
JOIN FCOBDB.Student_Current.dbo.Name nM With ( noLock )
ON sE.SSN = nM.SSN
LEFT OUTER JOIN FCoBDB.Student_Current.dbo.eMail_Address eA With ( noLock )
ON sE.SSN = eA.SSN
LEFT OUTER JOIN ADIS_Import_Support.dbo.Student_Records sR With ( noLock )
ON sE.SSN = sR.SSN
/* Selection Clauses ...................................................... */
Where
/* Undergraduate Business Students .................................. */
( sE.prim_coll_code = 'BUS' and
sE.dept_major_code <> '805' and
sE.status_code = 1 and /* Good citizens */
sE.enroll_yyyyq_code = 20074 and /* current quarter only */
sR.Client_ID IS NULL ) /* Data not in Maximizer! */
or /* Executive Education Students ..................................... */
( sE.prim_coll_code = 'GRD' and
sE.dept_major_code = '296' and
sE.status_code = 1 and /* Good citizens */
sE.enroll_yyyyq_code = 20074 and /* current quarter only */
sR.Client_ID IS NULL ) /* Data not in Maximizer */
/* Sort Options ........................................................... */
order By nM.last_name, nM.first_name ;
I have created an SSIS package
to run on a SQL 2005 server. This SSIS pkg was migrated from 2000 to 2005. There a Data transform task in that package to transfer data from a tbl on one server to another.
In source tbl, datatype is text, and in dest (2005 tbl) datatype is nvarchar(1000). This data transfer worked just fine , in 2000 but in 2005 it is giving the foll error.
But when I run my package, i get back the following error
'Column "xxx" cannot convert between unicode and non-unicode string data types'.
I tried using the data covnersion task, to convert to DT-STR, But is still failing.