Conversion Failed Because The Data Value Overflowed The Specified Type
Apr 29, 2008
Hi All,
I am facing very weird issue...
When i am running package thru SQL server job and getting follwing error:
SIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification".
There was an error with input column "Billing_date" (2568) on input "OLE DB Destination Input" (979). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "OLE DB Destination Input" (979)" failed because error code 0xC020907A occurred, and the error row disposition on "input "OLE DB Destination Input" (979)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "billing_table" (966) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0209029.
In the package, i am selecting data from SQL Server database into query(billing_table) and inserting data using destination task into SQL server table(stg_billing_table). Both table has same data type datetime for Billing_date.
Here are couple of points:
1) When i am trying to execute same insert statement thru SQL Server editor, it is running successfully.
INSERT INTO stg_billing_table (Billing_date)
SELECT Billing_date FROM stg_billing_table;
2) When I am running package from Solution explorer then also it works fine.
Issue only comes when i try to run package thru SQL server job. one point, There are lot of other task running parallel to this package when we run thru JOB.
One more thing which i have observed that when i tried to see input transformation datatype for same column in package, it is DT_DATABASETIMESTAMP. Well i am not able to understand that it may be potential issue because if it is related to DT_DATABASETIMESTAMP to date time conversion then we should have faced this issue while running thru solution IDE.
Issue looks related to database level buffer/ Memory overflow etc. to me. Can somebody help me understanding the issue?
I have a problem while transforming data from an Access DB to an SQL 2005 DB.
Context:
- Migration of packages from SQL 2000 to SQL 2005 - DB SQL 2005 is a back up from SQL 2000 - The access DB is the same than the one used with SQL 2000
Error:
[OLE DB Source [1]] Error: There was an error with output column "ID" (32) on output "OLE DB Source Output" (11). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
Access Source:
tblSource
ID DateID ConfigIDRequest FromTime ToTime
43221 01.01.2007 362 00.00 05.30
43233 01.01.2007 362 21.10 23.59
43234 01.02.2007 362 00.00 05.30
43244 01.02.2007 362 21.10 23.59
43247 01.03.2007 362 00.00 05.30
...
SQL Destination:
Destination table SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO CREATE TABLE [dbo].[tblDestination]( [ID] [int] NOT NULL, [DateID] [nvarchar](10) NULL, [ConfigIDRequest] [int] NULL, [FromTime] [nvarchar](5) NULL, [ToTime] [nvarchar](5) NULL ) ON [PRIMARY]
SSIS Package description:
- Control Flow:
* Data Flow Task - Data Flow:
* OLE DB Source pointing to tblSource, using AccessCon * OLE DB Destination pointing to tblDestination, using SQL2005Con - Connections:
* AccessCon : Native OLE DBMicrosoft Jet 4.0 OLE DB Provider pointing to AccessSource.mdb * SQL2005Con : Native OLE DBMicrosoft OLE DB Provider for SQL Server
NB: All those components are default configured
Previous tests executed:
1. OLE DB Source Preview : OK, same records. 2. Error redirection to flat file for ID column : here are the first records
3. Execute the transformation on the SQL2000 server, for the same Access DB, to the initial SQL 2000 DB : OK, no error.
Questions:
- Do you have an idea of what differs between SQL2000 and SQL2005 in this kind of situation? - Why is this working for 2000 and not 2005? - Why the error message says "output column "ID" (32) on output "OLE DB Source Output" (11). ". Shouldn't it be something like "output column "ID" (32) on input "ID" (11). " (with the second ID column for the SQL DB). - May be the error comes from my connections parameters, one parameter which doesn't exists in SQL2000?
My query was working fine until I added the yellow highlighted areas below. Basically what I'm doing with this is getting the lowest open purchase order number (docnum) and its matching docduedate. Now when I run it I get
Conversion failed when converting the varchar value 'po_num' to data type int.
Any ideas? Thanks!
SELECT t3.product ,
t7.itemname ,
t2.u_vlgx_plc,
t3.shorted ,
t4.onhand ,
MIN(
CASE
WHEN t8.linestatus = 'O'
THEN t9.docnum
ELSE NULL
END) po_num,
t10.docduedate
FROM
(SELECT t0.product product ,
SUM(
CASE
WHEN t0.qty_topick <> t0.qty_picked
THEN t0.qty_topick - t0.qty_picked
ELSE 0
END) shorted
FROM rbeacon.dbo.shipline2 t0
INNER JOIN rbeacon.dbo.shiphist t1
ON t0.packslip = t1.packslip
WHERE t1.date_upld = CONVERT(VARCHAR(10), GETDATE()-1, 101)
GROUP BY t0.product
) t3
INNER JOIN comparison.dbo.vlgxplc t2
ON t2.itemcode = t3.product COLLATE Latin1_General_CI_AS
LEFT JOIN
(SELECT t0.product AS product,
SUM(t0.quantity) AS onhand
FROM rbeacon.dbo.binlocat t0
GROUP BY t0.product
) t4
ON t3.product = t4.product
INNER JOIN wbau.dbo.oitm t5
ON t3.product = t5.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS
LEFT JOIN wbau.dbo.ocrd t6
ON t5.cardcode = t6.cardcode
INNER JOIN wbau.dbo.oitm t7
ON t3.product = t7.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS
LEFT JOIN wbau.dbo.por1 t8
ON t3.product = t8.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS
I am using Sql server 2005, Asp.net 2.0. In my application i have to store a mobile number in database, and in table it is declared as nvarchar(50) (datatype). In stored procedure as it is nvarchar(50). In my code , stored procedure is called in a function. In that while executing project error is coming as (cmd.ExecuteNonQuery) Conversion failed when converting the nvarchar value xxxxxxxxx to data type int. Kindly give your suggestions to solve this problem.
I try to compile your query, and prompt error message in below 'conversion failed when converting the varchar value 'times' to data type int .Error code 245.
select user_member , sum(case when trx_date > dateadd(month, -3, getdate()) then 1 else 0 end) + ' times' , max(case when trx_date < dateadd(month, -3, getdate()) then trx_date else NULL end) from trx_hdr group by user_member
CASE WHEN NULLIF(NHSNo2, '') IS NULL THEN 1 WHEN NULLIF(Surname, '') IS NULL THEN 2 WHEN NULLIF(Forename, '') IS NULL THEN 3 WHEN NULLIF(DOB, '') IS NULL OR DOB < '01/01/1900' THEN 4 WHEN NULLIF(AddressLine1, '') IS NULL THEN 5
[code]...
The above code worth great but ideally instead of returning a number Id like to return text for example
i am trying to run to get a list of computers from a table based on the available free space. I'd like to group them based on the available space, for example, up to 1 GB, 1-2 GB, etc.
However when i run this query, i get an error : Msg 245, Level 16, State 1, Line 1 Conversion failed when converting the varchar value '1GB To 2GB' to data type int.
Hi, I was using a Store Proc and it was working nice , Now, I am getting this error as:
Conversion failed when converting the varchar value 'APCCE' to data type int Is that should make any problem as well Just want to know ..the help Thanks
I am newbie in asp and sql, and I am using VS & SQL expresswhen I try to submit I get following error"Conversion failed when converting character string to smalldatetime data type"Following is my insert statement<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:oncallConnectionString %>"SelectCommand="SELECT data.* FROM data" InsertCommand="INSERT INTO data(Apps, Location, Impact, System, Date, Start_Time, End_Time, Duration, Problem, Cause, Solution, Case, Comments) VALUES ('@DropDownList1','@DropDownList2','@DropDownList3','@TextBox6','@DropDownCalendar1','@DropDownCalendar2','@DropDownCalendar3','@TextBox1','@TextBox2','@TextBox3','@TextBox4','@TextBox5','@TextBox7')"></asp:SqlDataSource>These are @DropDownCalendar1','@DropDownCalendar2','@DropDownCalendar3' defined as datetime in database.I would appriciate if somebody could help.
Hello, I have problem with this code.(This program presents - there is GridView tied to a SQL database that will sort the data selected by a dropdownList at time categories. There are 2 time categories in DropDownList - this day, this week. Problem: when I choose one categorie in dropDownlist for examle this week and submit data on the server I got this error. Conversion failed when converting character string to smalldatetime data type. Here is code: <%@ Page Language="C#" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <script runat="server">
I am running the following query: select distinct hqvend, hqvprd,fprod,idesc,ilead,sum(cast(fqty as int) )as fqty, (cast(hqvend as varchar(5))+'/'+ltrim(rtrim(fprod))+'/'+cast(ilead as varchar(3))) as Keydata,'L1/'+rtrim(fprod) as LocPartno from tblkfpl01 inner join hqtl01 on (fprod=hqprod) inner join iiml01 on (hqvend=ivend and hqprod=iprod) where cast(cast(hqeff as varchar(8)) as smalldatetime) <= (Select CONVERT(varchar(8), getdate(), 1)) and cast(HQDIS as varchar(8)) >= (Select CONVERT(varchar(8), getdate(), 1)) and hqvend like '134%' group by hqvend,fprod,hqvprd,idesc,ilead order by hqvend,fprod The bold sections are giving me the error message. The query works as written above, butis only evaluating on one date, contained in hqeff. However, when I try to modify the second date, HQDIS, by casting it the same way as the one before it: select distinct hqvend, hqvprd,fprod,idesc,ilead,sum(cast(fqty as int) )as fqty, (cast(hqvend as varchar(5))+'/'+ltrim(rtrim(fprod))+'/'+cast(ilead as varchar(3))) as Keydata,'L1/'+rtrim(fprod) as LocPartno from tblkfpl01 inner join hqtl01 on (fprod=hqprod) inner join iiml01 on (hqvend=ivend and hqprod=iprod) where cast(cast(hqeff as varchar(8)) as smalldatetime) <= (Select CONVERT(varchar(8), getdate(), 1)) and cast(cast(HQDIS as varchar(8)) as smalldatetime) >= (Select CONVERT(varchar(8), getdate(), 1)) and hqvend like '134%' group by hqvend,fprod,hqvprd,idesc,ilead order by hqvend,fprod I get the error message. I need to select based on both dates (hqeff AND HQDIS), but cannot seem to be able to it.... Both fields are of type Dedimal, with a length of 8, and dates stored in them look like: 20071003 (YYYYMMDD). Any suggestions?
I am doing a Case statement to create a unified field for account type and vendor, in the code below I am receiving the error in the subject, because the account numbers have alpha characters in the string, I need to make them as OTHER if the first 2 left chars are Alpha, I thought how I have ISNUMERIC would do that but I am still getting the error.
I am also including example of how the account_numbers are formatted.
I have SQL Server 2005 database table with the following data definition as follows:
ID int LST_TIME varchar(5) LST_DATE varchar(21) LST_WEEK int SUBJECT varchar(100)
Date format (Month,day YEAR) eg.- October, 21 2007 Time format, 00 - 23 hours, HH:MM eg. - 18:58
, and a VB code as below:
Dim Command As New SqlClient.SqlCommand("SELECT * FROM dbo.LISTS WHERE (LST_WK = DATEPART(wk, GETDATE())) AND (CONVERT(datetime, LST_DATE) = CONVERT(datetime, CONVERT(varchar, GETDATE(), 110))) AND(CONVERT(smalldatetime, LST_TIME) = CONVERT(smalldatetime, CONVERT(varchar(5), GETDATE(), 108)))", conn)
Dim dataReader As SqlClient.SqlDataReader = Command.ExecuteReader(CommandBehavior.CloseConnection) While dataReader.Read()
Dim NewAlert As New Alert(dataReader("SUBJECT").ToString(), DateTime.Parse(dataReader("LST_DATE").ToString(), DateTime.Parse(dataReader("LST_TIME").ToString())))
: : : I am encountering error: System.Data.SqlClient.SqlException: Conversion failed when converting character string to smalldatetime data type, which points to the codes in bold. Just wondering anyone out there has got a solution to my problem. Thank you.
Recently i traspased a database from sql server 2000 in spanish to sql server 2005 in english. I change the language of the user sa to spanish and the database is in spanish. . The problem is our dateformat is dmy, i try to force with set dateformat dmy, but always i execute a stored procedure that have a date as input it fail. The error is:
Msg 295, Level 16, State 3, Procedure pa_CalendarioGestion, Line 40 Conversion failed when converting character string to smalldatetime data type.
The code of stored procedure in this line is:
set @diaActual = dateadd("d", @i, @fechaInicio)
This stored procedure in sql server 2000 in spanish not have any problems. For this reason i think the problem is in the configuration.
I can't seem to fix the following error in my stored procedure.
Error Message: Conversion failed when converting the nvarchar value '1007-001' to data type int.
The line of code in my stored procedure that seems to be the problem is the following:
CASE WHEN [Order Details].[Job No] IS NULL THEN [Orders].[Order No] ELSE [Order Details].[Job No] END
Order No has a data type of INT and Job No has a data type NVARCHAR(8). In the above case statement i'm not trying to convert anything but just display a column depending on the out come of the case statement. If anyone knows how to get around this error you help would be very welcome.
I want to get Email address from sql database. But whenever I executed stored procedure I get an error message "Conversion failed when converting the nvarchar value 'xxxxxx@xxxxxx' to data type int" If I want some numeric ID it is worked.
I also change my SP like this but results same.
ALTER procedure [dbo].[findConsultantMail]
(
@PerID nvarchar(18),
@perMail nvarchar(100) OUTPUT
)
as
SELECT @perMail=PerMail FROM Personel
WHERE (PerID =cast(@PerID as numeric(18,0)))
return cast(@perMail as nvarchar(100))
How can I get a string value form stored procedure.
I am trying to write a query that give me how many items were filed per year.
This is the error:
Conversion failed when converting the varchar value 'YEAR(1999)' to data type int.
Here is the query I am using:
SELECT COUNT (*), CASE WHEN ChargesFiledDate > 20141231 THEN 'YEAR (2015)' WHEN ChargesFiledDate > 20131231 THEN 'YEAR (2014)' WHEN ChargesFiledDate > 20121231 THEN 'YEAR (2013)' ELSE YEAR (0000)
[Code] ...
And got the same error. I know there is probably a better way to get this data (being that I need it from 2007 to present), but don't know how to write it.
All source and target date fields are defined as data type "smalldatetime". The "select" executes without error though when used with "insert into" it fails with the error:
Msg 295, Level 16, State 3, Line 25: Conversion failed when converting character string to small date-time data type..I am converting from a character string to smalldatetime since the source and target date columns are "smalldatetime". All other columns for the source and target are nvarchar(255). I assume there is an implicit conversion that I don't understand. In a test, I validated that all dates selected evaluate ISDATE() to 1.
USE [SCIR_DataMart_FromProd_06_20_2014] GO IF OBJECT_ID ('[SCIR_DataMart_FromProd_06_20_2014].[dbo].[IdentifierLookup]', 'U') IS NOT NULL DROP TABLE [SCIR_DataMart_FromProd_06_20_2014].[dbo].[IdentifierLookup]
this is in form VB Private Sub orderidtxbx_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles orderidtxbx.Click sqlconnection = New SqlConnection("Data Source= xxxx;Initial Catalog = xxxx; user ID = sa; Password = xxxxx;") sqlcommand = New SqlCommand("select Customer.LastName, Customer.FirstName from customer where ticket.ticketid ='" & orderidtxbx.Text & "'", sqlconnection)
error msg The multi-part identifier "ticket.ticketid" could not be bound
query in sql 2005,I need to make store procedure.
SELECT Itinerary.FlightID, Itinerary.Class, Itinerary.Quantity, Ticket.Date, Flight.FlightNo, Flight.AirLine, Flight.DepartureDate, Flight.ArrivalDate, Flight.DepartureTime, Flight.ArrivalTime, Flight.Price, Departure.DepartureLocation, Arrival.ArrivalLocation,GST=convert(int,Itinerary. Quantity*0.06*Flight.Price),PST=convert(int,Itiner ary.Quantity*0.07*Flight.Price),TotalPrice=convert (int,(Itinerary.Quantity*0.06*Flight.Price)+(Itine rary.Quantity*0.07*Flight.Price)+Flight.Price) FROM Flight INNER JOIN Itinerary ON Flight.FlightID = Itinerary.FlightID INNER JOIN Ticket ON Itinerary.TicketID = Ticket.TicketID INNER JOIN Departure ON Flight.DepartureLocationID = Departure.DepartureID INNER JOIN Arrival ON Flight.ArrivalLocationID = Arrival.ArrivalID WHERE (Itinerary.ticketid = '@Itinerary.ticketid')
if i change WHERE (Itinerary.ticketid = 1) it will read the data in the table.
I need to refer that itinerary.ticketid into textbox in form that's why i make like this WHERE (Itinerary.ticketid = '@Itinerary.ticketid') but i don't know what is worng with this.
This error Msg 245, Level 16, State 1, Line 2 Conversion failed when converting the varchar value '@Itinerary.ticketid' to data type int(but my ticketid value already integer not varchar).
Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
HiAm Using ASP.NET With SQL SERVER 2005 Backend AGENT CODE 3008000003
NAME agent code dropdownlist values like 1005000006,2009000002,3008000003select dropdownlist value it display corresponding values related to that codewhen i select first 2 values its run properly,But when i select 3008000003 i will get following error messagein SQL SERVER 2005 Agent Code Date Type is "bigint"" The conversion of the nvarchar value '3008000003' overflowed an int column. Maximum integer value exceeded. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: The conversion of the nvarchar value '3008000003' overflowed an int column. Maximum integer value exceeded.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: Please Help me to solve this issueThanks With RegardsS.Senthil Nathan
I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.
I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.
I hope someone can help me work through this.
Thanks in advance,
SK
SSIS package "Package3.dtsx" starting.
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Task failed: Bulk Insert Task 1
Task failed: Bulk Insert Task
Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
hello all .. I have a form that includes two textboxes (Date and Version) .. When I try to insert the record I get the following error message .. seems that something wrong with my coversion (Data type)"The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."
in my SQL database I have the date feild as datetime and the version as nvarchar(max) this is the code in the vb page .. Can you please tell me how to solve this problem?Imports System.Data.SqlClient Imports system.web.configuration
Partial Class Admin_emag_insert Inherits System.Web.UI.Page
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load Record_DateTextBox.Text = DateTime.Now
End Sub
Protected Sub clearButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles clearButton.Click Me.VersionTextBox.Text = "" End Sub
Protected Sub addButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles addButton.Click Dim objConnection As SqlConnection Dim objDataCommand As SqlCommand Dim ConnectionString As String Dim record_date As Date Dim version As String Dim emagSQL As String
'save form values in variables record_date = Record_DateTextBox.Text version = VersionTextBox.Text
'Create and open the connection objConnection = New SqlConnection(ConnectionString) objConnection.Open() emagSQL = "Insert into E_Magazine (Record_Date, Version ) " & _ "values('" & record_date & "','" & version & "')"
'Create and execute the command objDataCommand = New SqlCommand(emagSQL, objConnection) objDataCommand.ExecuteNonQuery() objConnection.Close()
AddMessage.Text = "A new emagazine was added successfully"
[Source - chn_employee_vew_test_txt [1]] Error: Data conversion failed. The data conversion for column "Column 42" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
[Source - chn_employee_vew_test_txt [1]] Error: The "output column "Column 42" (136)" failed because truncation occurred, and the truncation row disposition on "output column "Column 42" (136)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
I using Locale (People's Republic of China) and code page of 936 (Simplied Chinese GBK) with header row delimiter {CR}{LF}.
I am using flat file import method.
Whenever the server process the Column 42 with value "11,Nanjing Rd.W, China" which contain 'comma' or '.' it will hit error importing with above message. When i manually change the column value to non comma or '.' (11 Nanjing Rd W China) in the flat file it is ok.
I am using SQL server 2005.
Please advise what need to be done to avoid this error ?
Thanks in advance and any idea or suggestion is very much appreciated as i have try to solve this issue for over a week but still not able to find any answer on it.
[Source - chn_employee_vew_test_txt [1]] Error: Data conversion failed. The data conversion for column "Column 42" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
[Source - chn_employee_vew_test_txt [1]] Error: The "output column "Column 42" (136)" failed because truncation occurred, and the truncation row disposition on "output column "Column 42" (136)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
I using Locale (People's Republic of China) and code page of 936 (Simplied Chinese GBK) with header row delimiter {CR}{LF}.
I am using flat file import method.
Whenever the server process the Column 42 with value "11,Nanjing Rd.W, China" which contain 'comma' or '.' it will hit error importing with above message. When i manually change the column value to non comma or '.' (11 Nanjing Rd W China) in the flat file it is ok.
I am using SQL server 2005.
Please advise what need to be done to avoid this error ?
Thanks in advance and any idea or suggestion is very much appreciated as i have try to solve this issue for over a week but still not able to find any answer on it.
update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?
Advance thanks ....... My table is TimeSheet:----------------------------------- CREATE TABLE [dbo].[TimeSheet]( [autoid] [int] IDENTITY(1,1) NOT NULL, [UserId] [int] NOT NULL, [starttime] [datetime] NOT NULL, [endtime] [datetime] NOT NULL, [summary] [nvarchar](50) NOT NULL, [description] [nvarchar](50) NULL, [dtOfEntry] [datetime] NOT NULL, [Cancelled] [bit] NULL) ON [PRIMARY] My Query is------------------ insert into timesheet (UserId, StartTime,EndTime, Summary, Description,DtOfEntry) values (2, '19/04/2008 2:05:06 PM', '19/04/2008 2:05:06 PM', '66', '6666','19/04/2008 2:05:06 PM')i m not able to insert value Error Message is-------------------------Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated. can any body give any solution
