Conversion Failed When Converting The Varchar Value '@Itinerary.ticketid' To Data Type Int(but My Ticketid Value Already Integer
Nov 25, 2007
this is in form VB
Private Sub orderidtxbx_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles orderidtxbx.Click
sqlconnection = New SqlConnection("Data Source= xxxx;Initial Catalog = xxxx; user ID = sa; Password = xxxxx;")
sqlcommand = New SqlCommand("select Customer.LastName, Customer.FirstName from customer where ticket.ticketid ='" & orderidtxbx.Text & "'", sqlconnection)
error msg The multi-part identifier "ticket.ticketid" could not be bound
query in sql 2005,I need to make store procedure.
SELECT Itinerary.FlightID, Itinerary.Class, Itinerary.Quantity, Ticket.Date, Flight.FlightNo, Flight.AirLine, Flight.DepartureDate, Flight.ArrivalDate,
Flight.DepartureTime, Flight.ArrivalTime, Flight.Price, Departure.DepartureLocation, Arrival.ArrivalLocation,GST=convert(int,Itinerary. Quantity*0.06*Flight.Price),PST=convert(int,Itiner ary.Quantity*0.07*Flight.Price),TotalPrice=convert (int,(Itinerary.Quantity*0.06*Flight.Price)+(Itine rary.Quantity*0.07*Flight.Price)+Flight.Price)
FROM Flight INNER JOIN
Itinerary ON Flight.FlightID = Itinerary.FlightID INNER JOIN
Ticket ON Itinerary.TicketID = Ticket.TicketID INNER JOIN
Departure ON Flight.DepartureLocationID = Departure.DepartureID INNER JOIN
Arrival ON Flight.ArrivalLocationID = Arrival.ArrivalID
WHERE (Itinerary.ticketid = '@Itinerary.ticketid')
if i change WHERE (Itinerary.ticketid = 1)
it will read the data in the table.
I need to refer that itinerary.ticketid into textbox in form that's why i make like this WHERE (Itinerary.ticketid = '@Itinerary.ticketid') but i don't know what is worng with this.
This error Msg 245, Level 16, State 1, Line 2
Conversion failed when converting the varchar value '@Itinerary.ticketid' to data type int(but my ticketid value already integer not varchar).
My query was working fine until I added the yellow highlighted areas below. Basically what I'm doing with this is getting the lowest open purchase order number (docnum) and its matching docduedate. Now when I run it I get
Conversion failed when converting the varchar value 'po_num' to data type int.
Any ideas? Thanks!
SELECT t3.product ,
t7.itemname ,
t2.u_vlgx_plc,
t3.shorted ,
t4.onhand ,
MIN(
CASE
WHEN t8.linestatus = 'O'
THEN t9.docnum
ELSE NULL
END) po_num,
t10.docduedate
FROM
(SELECT t0.product product ,
SUM(
CASE
WHEN t0.qty_topick <> t0.qty_picked
THEN t0.qty_topick - t0.qty_picked
ELSE 0
END) shorted
FROM rbeacon.dbo.shipline2 t0
INNER JOIN rbeacon.dbo.shiphist t1
ON t0.packslip = t1.packslip
WHERE t1.date_upld = CONVERT(VARCHAR(10), GETDATE()-1, 101)
GROUP BY t0.product
) t3
INNER JOIN comparison.dbo.vlgxplc t2
ON t2.itemcode = t3.product COLLATE Latin1_General_CI_AS
LEFT JOIN
(SELECT t0.product AS product,
SUM(t0.quantity) AS onhand
FROM rbeacon.dbo.binlocat t0
GROUP BY t0.product
) t4
ON t3.product = t4.product
INNER JOIN wbau.dbo.oitm t5
ON t3.product = t5.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS
LEFT JOIN wbau.dbo.ocrd t6
ON t5.cardcode = t6.cardcode
INNER JOIN wbau.dbo.oitm t7
ON t3.product = t7.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS
LEFT JOIN wbau.dbo.por1 t8
ON t3.product = t8.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS
I try to compile your query, and prompt error message in below 'conversion failed when converting the varchar value 'times' to data type int .Error code 245.
select user_member , sum(case when trx_date > dateadd(month, -3, getdate()) then 1 else 0 end) + ' times' , max(case when trx_date < dateadd(month, -3, getdate()) then trx_date else NULL end) from trx_hdr group by user_member
CASE WHEN NULLIF(NHSNo2, '') IS NULL THEN 1 WHEN NULLIF(Surname, '') IS NULL THEN 2 WHEN NULLIF(Forename, '') IS NULL THEN 3 WHEN NULLIF(DOB, '') IS NULL OR DOB < '01/01/1900' THEN 4 WHEN NULLIF(AddressLine1, '') IS NULL THEN 5
[code]...
The above code worth great but ideally instead of returning a number Id like to return text for example
i am trying to run to get a list of computers from a table based on the available free space. I'd like to group them based on the available space, for example, up to 1 GB, 1-2 GB, etc.
However when i run this query, i get an error : Msg 245, Level 16, State 1, Line 1 Conversion failed when converting the varchar value '1GB To 2GB' to data type int.
Hi, I was using a Store Proc and it was working nice , Now, I am getting this error as:
Conversion failed when converting the varchar value 'APCCE' to data type int Is that should make any problem as well Just want to know ..the help Thanks
I am doing a Case statement to create a unified field for account type and vendor, in the code below I am receiving the error in the subject, because the account numbers have alpha characters in the string, I need to make them as OTHER if the first 2 left chars are Alpha, I thought how I have ISNUMERIC would do that but I am still getting the error.
I am also including example of how the account_numbers are formatted.
I am trying to write a query that give me how many items were filed per year.
This is the error:
Conversion failed when converting the varchar value 'YEAR(1999)' to data type int.
Here is the query I am using:
SELECT COUNT (*), CASE WHEN ChargesFiledDate > 20141231 THEN 'YEAR (2015)' WHEN ChargesFiledDate > 20131231 THEN 'YEAR (2014)' WHEN ChargesFiledDate > 20121231 THEN 'YEAR (2013)' ELSE YEAR (0000)
[Code] ...
And got the same error. I know there is probably a better way to get this data (being that I need it from 2007 to present), but don't know how to write it.
I'm trying to pass a character (D) to an integer data type!i'm getting this error:Conversion failed when converting the varchar value '17D' to data type int.
I am using Sql server 2005, Asp.net 2.0. In my application i have to store a mobile number in database, and in table it is declared as nvarchar(50) (datatype). In stored procedure as it is nvarchar(50). In my code , stored procedure is called in a function. In that while executing project error is coming as (cmd.ExecuteNonQuery) Conversion failed when converting the nvarchar value xxxxxxxxx to data type int. Kindly give your suggestions to solve this problem.
I am newbie in asp and sql, and I am using VS & SQL expresswhen I try to submit I get following error"Conversion failed when converting character string to smalldatetime data type"Following is my insert statement<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:oncallConnectionString %>"SelectCommand="SELECT data.* FROM data" InsertCommand="INSERT INTO data(Apps, Location, Impact, System, Date, Start_Time, End_Time, Duration, Problem, Cause, Solution, Case, Comments) VALUES ('@DropDownList1','@DropDownList2','@DropDownList3','@TextBox6','@DropDownCalendar1','@DropDownCalendar2','@DropDownCalendar3','@TextBox1','@TextBox2','@TextBox3','@TextBox4','@TextBox5','@TextBox7')"></asp:SqlDataSource>These are @DropDownCalendar1','@DropDownCalendar2','@DropDownCalendar3' defined as datetime in database.I would appriciate if somebody could help.
Hello, I have problem with this code.(This program presents - there is GridView tied to a SQL database that will sort the data selected by a dropdownList at time categories. There are 2 time categories in DropDownList - this day, this week. Problem: when I choose one categorie in dropDownlist for examle this week and submit data on the server I got this error. Conversion failed when converting character string to smalldatetime data type. Here is code: <%@ Page Language="C#" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <script runat="server">
I am running the following query: select distinct hqvend, hqvprd,fprod,idesc,ilead,sum(cast(fqty as int) )as fqty, (cast(hqvend as varchar(5))+'/'+ltrim(rtrim(fprod))+'/'+cast(ilead as varchar(3))) as Keydata,'L1/'+rtrim(fprod) as LocPartno from tblkfpl01 inner join hqtl01 on (fprod=hqprod) inner join iiml01 on (hqvend=ivend and hqprod=iprod) where cast(cast(hqeff as varchar(8)) as smalldatetime) <= (Select CONVERT(varchar(8), getdate(), 1)) and cast(HQDIS as varchar(8)) >= (Select CONVERT(varchar(8), getdate(), 1)) and hqvend like '134%' group by hqvend,fprod,hqvprd,idesc,ilead order by hqvend,fprod The bold sections are giving me the error message. The query works as written above, butis only evaluating on one date, contained in hqeff. However, when I try to modify the second date, HQDIS, by casting it the same way as the one before it: select distinct hqvend, hqvprd,fprod,idesc,ilead,sum(cast(fqty as int) )as fqty, (cast(hqvend as varchar(5))+'/'+ltrim(rtrim(fprod))+'/'+cast(ilead as varchar(3))) as Keydata,'L1/'+rtrim(fprod) as LocPartno from tblkfpl01 inner join hqtl01 on (fprod=hqprod) inner join iiml01 on (hqvend=ivend and hqprod=iprod) where cast(cast(hqeff as varchar(8)) as smalldatetime) <= (Select CONVERT(varchar(8), getdate(), 1)) and cast(cast(HQDIS as varchar(8)) as smalldatetime) >= (Select CONVERT(varchar(8), getdate(), 1)) and hqvend like '134%' group by hqvend,fprod,hqvprd,idesc,ilead order by hqvend,fprod I get the error message. I need to select based on both dates (hqeff AND HQDIS), but cannot seem to be able to it.... Both fields are of type Dedimal, with a length of 8, and dates stored in them look like: 20071003 (YYYYMMDD). Any suggestions?
I have SQL Server 2005 database table with the following data definition as follows:
ID int LST_TIME varchar(5) LST_DATE varchar(21) LST_WEEK int SUBJECT varchar(100)
Date format (Month,day YEAR) eg.- October, 21 2007 Time format, 00 - 23 hours, HH:MM eg. - 18:58
, and a VB code as below:
Dim Command As New SqlClient.SqlCommand("SELECT * FROM dbo.LISTS WHERE (LST_WK = DATEPART(wk, GETDATE())) AND (CONVERT(datetime, LST_DATE) = CONVERT(datetime, CONVERT(varchar, GETDATE(), 110))) AND(CONVERT(smalldatetime, LST_TIME) = CONVERT(smalldatetime, CONVERT(varchar(5), GETDATE(), 108)))", conn)
Dim dataReader As SqlClient.SqlDataReader = Command.ExecuteReader(CommandBehavior.CloseConnection) While dataReader.Read()
Dim NewAlert As New Alert(dataReader("SUBJECT").ToString(), DateTime.Parse(dataReader("LST_DATE").ToString(), DateTime.Parse(dataReader("LST_TIME").ToString())))
: : : I am encountering error: System.Data.SqlClient.SqlException: Conversion failed when converting character string to smalldatetime data type, which points to the codes in bold. Just wondering anyone out there has got a solution to my problem. Thank you.
Recently i traspased a database from sql server 2000 in spanish to sql server 2005 in english. I change the language of the user sa to spanish and the database is in spanish. . The problem is our dateformat is dmy, i try to force with set dateformat dmy, but always i execute a stored procedure that have a date as input it fail. The error is:
Msg 295, Level 16, State 3, Procedure pa_CalendarioGestion, Line 40 Conversion failed when converting character string to smalldatetime data type.
The code of stored procedure in this line is:
set @diaActual = dateadd("d", @i, @fechaInicio)
This stored procedure in sql server 2000 in spanish not have any problems. For this reason i think the problem is in the configuration.
I can't seem to fix the following error in my stored procedure.
Error Message: Conversion failed when converting the nvarchar value '1007-001' to data type int.
The line of code in my stored procedure that seems to be the problem is the following:
CASE WHEN [Order Details].[Job No] IS NULL THEN [Orders].[Order No] ELSE [Order Details].[Job No] END
Order No has a data type of INT and Job No has a data type NVARCHAR(8). In the above case statement i'm not trying to convert anything but just display a column depending on the out come of the case statement. If anyone knows how to get around this error you help would be very welcome.
I want to get Email address from sql database. But whenever I executed stored procedure I get an error message "Conversion failed when converting the nvarchar value 'xxxxxx@xxxxxx' to data type int" If I want some numeric ID it is worked.
I also change my SP like this but results same.
ALTER procedure [dbo].[findConsultantMail]
(
@PerID nvarchar(18),
@perMail nvarchar(100) OUTPUT
)
as
SELECT @perMail=PerMail FROM Personel
WHERE (PerID =cast(@PerID as numeric(18,0)))
return cast(@perMail as nvarchar(100))
How can I get a string value form stored procedure.
All source and target date fields are defined as data type "smalldatetime". The "select" executes without error though when used with "insert into" it fails with the error:
Msg 295, Level 16, State 3, Line 25: Conversion failed when converting character string to small date-time data type..I am converting from a character string to smalldatetime since the source and target date columns are "smalldatetime". All other columns for the source and target are nvarchar(255). I assume there is an implicit conversion that I don't understand. In a test, I validated that all dates selected evaluate ISDATE() to 1.
USE [SCIR_DataMart_FromProd_06_20_2014] GO IF OBJECT_ID ('[SCIR_DataMart_FromProd_06_20_2014].[dbo].[IdentifierLookup]', 'U') IS NOT NULL DROP TABLE [SCIR_DataMart_FromProd_06_20_2014].[dbo].[IdentifierLookup]
why do i have this error? not converting a varchar into int 1 ALTER PROCEDURE dbo.RevertDB 2 ( 3 @Log varchar(MAX) = NULL OUTPUT 4 ) 5 6 /* Reverts Database to original "Clean" State */ 7 AS 8 SET NOCOUNT OFF 9 DECLARE @RowsInDB AS int 10 SET @Log = 'RevertDB Started at ' + CAST(GETDATE() AS varchar(50)) + '<br />' 11 12 /* *** Disable Constraints *** 13 ALTER TABLE Booking NOCHECK CONSTRAINT ALL 14 ALTER TABLE InventoryPC NOCHECK CONSTRAINT ALL 15 ALTER TABLE PC NOCHECK CONSTRAINT ALL 16 ALTER TABLE Platform NOCHECK CONSTRAINT ALL*/ 17 18 /* *** Start Deletes *** */ 19 DELETE FROM Booking 20 SET @Log = @Log + 'Clear Table Booking - Done' + '<br />' 21 SET @RowsInDB = (SELECT COUNT(BookingID) FROM Booking) 22 SET @Log = @Log + '-- Rows Affected: ' + CAST(@@ROWCOUNT AS varchar(10)) + ', Rows in Table: ' + CAST(@RowsInDB AS varchar(10)) + '<br />' 23 24 DELETE FROM InventoryPC 25 SET @Log = @Log + 'Clear Table InventoryPC - Done' + '' 26 SET @RowsInDB = (SELECT COUNT(InventoryID) FROM InventoryPC) 27 SET @Log = @Log + '-- Rows Affected: ' + CAST(@@ROWCOUNT AS varchar(10)) + ', Rows in Table: ' + CAST(@RowsInDB AS varchar(10)) + '<br />' 28 29 DELETE FROM PC 30 SET @Log = @Log + 'Clear Table PC - Done' + '<br />' 31 SET @RowsInDB = (SELECT COUNT(PCID) FROM PC) 32 SET @Log = @Log + '-- Rows Affected: ' + CAST(@@ROWCOUNT AS varchar(10)) + ', Rows in Table: ' + CAST(@RowsInDB AS varchar(10)) + '<br />' 33 34 DELETE FROM Platform 35 SET @Log = @Log + 'CLear Table Platform - Done' + '' 36 SET @RowsInDB = (SELECT COUNT(PlatformID) FROM Platform) 37 SET @Log = @Log + '-- Rows Affected: ' + CAST(@@ROWCOUNT AS varchar) + ', Rows in Table: ' + CAST(@RowsInDB AS varchar(10)) + '<br />' 38 39 /* *** Enable Constraints *** 40 ALTER TABLE Booking WITH CHECK CHECK CONSTRAINT ALL 41 ALTER TABLE InventoryPC WITH CHECK CHECK CONSTRAINT ALL 42 ALTER TABLE PC WITH CHECK CHECK CONSTRAINT ALL 43 ALTER TABLE Platform WITH CHECK CHECK CONSTRAINT ALL*/ 44 45 SET @Log = @Log + '*** End Truncates ***' + '<br />' 46 /* *** End Truncates *** */ 47 48 /* *** Start Insert Platform *** */ 49 SET @Log = @Log + 'Start Insert Platform' + '<br />' 50 51 EXEC dbo.InsertPlatfrom 'Windows XP SP2 Professional Edition', 'Some description for Windows XP SP2 Professional Edition over here …' 52 EXEC dbo.InsertPlatfrom 'Windows Vista Ultimate', 'See everything you''re working on more clearly with Windows Aero, and quickly switch between windows or tasks using Windows Flip 3D and Live Thumbnails. You can easily find what you need—when you need it―with Instant Search and live icon previews that display the actual contents of your files. And while you''re at it, give your personal productivity a boost with instant access to the information you care about using Windows Sidebar and Gadgets. Put these easy-to-use and customizable mini-applications on your desktop and reveal the information you''re looking for at a glance. Website: http://www.microsoft.com/windows/products/windowsvista/seeit/default.mspx' 53 EXEC dbo.InsertPlatfrom 'Apple Mac OS X Tiger', 'Some description for Apple Mac OS X Tiger over here …' 54 EXEC dbo.InsertPlatfrom 'Apple Mac OS X Leopard', 'Desktop: The new look of Leopard showcases your favorite desktop image and puts new file Stacks at your fingertips for a stunning, clutter-free workspace. Finder: Browse your files like you browse your music with Cover Flow. Time Machine: See how your system looked on any given day and restore files with a click. Website: http://www.apple.com/macosx/leopard/features/' 55 EXEC dbo.InsertPlatfrom 'Red Hat Linux', 'Some description for Red Hat Linux over here …' 56 57 SET @Log = @Log + 'Rows In Platform: ' + CAST((SELECT COUNT(PlatformID) FROM Platform) AS varchar(10)) + '<br />' 58 /* *** Start Insert PC *** */ 59 SET @Log = @Log + 'Start Insert PC' + '<br />' 60 61 DECLARE @WinXP int, @WinVista int, @OSXTiger int, @OSXLeopard int, @RedHat int 62 SET @WinXP = (SELECT PlatformID FROM Platform WHERE Title = 'Windows XP SP2 Professional Edition') 63 SET @WinVista = (SELECT PlatformID FROM Platform WHERE Title = 'Windows Vista Ultimate') 64 SET @OSXTiger = (SELECT PlatformID FROM Platform WHERE Title = 'Apple Mac OS X Tiger') 65 SET @OSXLeopard = (SELECT PlatformID FROM Platform WHERE Title = 'Apple Mac OS X Leopard') 66 SET @RedHat = (SELECT PlatformID FROM Platform WHERE Title = 'Red Hat Linux') 67 68 EXEC dbo.InsertPC 'Fusion PC One', 'Description here ...', 'Intel Core2 Duo E6600 2.4 GHz 1066MHz', '1GB Dual Channel DDR2 667 SDRAM', '120GB SATA2 NCQ HDD', 'NVIDIA GeForce 8600 256MB GDDR3', '22" 3000:1 Wide Screen LCD', @WinXP 69 EXEC dbo.InsertPC 'Fusion PC Two', 'Description here ...', 'Intel Core2 Duo E6850 3 GHz 1333MHz', '2GB Dual Channel DDR2 800 SDRAM', '240GB SATA2 NCQ HDD', 'NVIDIA GeForce 8800 Ultra 256MB GDDR3 SLI', '24" 3000:1 Wide Screen LCD', @WinVista 70 EXEC dbo.InsertPC 'Fusion PC Three', 'Description here ...', 'AMD Athlon 64 X2 Dual Core 6000+ 3 GHz', '2GB Dual Channel DDR2 667 SDRAM', '240GB SATA2 NCQ HDD', 'ATI Radeon Cross Fire 2900 256MB GDDR3', '24" 3000:1 Wide Screen LCD', @WinVista 71 EXEC dbo.InsertPC 'Fusion X1', 'Description here ...', 'Intel Core2 Extreme Q6850 3 GHz 1333MHz', '6GB Dual Channel DDR2 800 SDRAM', '500GB SATA2 NCQ HDD', 'NVIDIA GeForce 8800 Ultra 256MB GDDR3 SLI', '30" 3000:1 Wide Screen LCD', @OSXLeopard 72 EXEC dbo.InsertPC 'Fusion X2', 'Description here ...', 'AMD Athlon 64 FX 74 3 GHz', '6GB Dual Channel DDR2 800 SDRAM', '500GB SATA2 NCQ HDD', 'NVIDIA GeForce 8900 Ultra SLI 256MB GDDR3', '30" 3000:1 Wide Screen LCD', @WinVista 73 EXEC dbo.InsertPC 'Fusion Tiger 1', 'Description here ...', 'Intel Core2 Duo E6600 2.4 GHz 1066MHz', '2GB Dual Channel DDR2 800 SDRAM', '120GB SATA2 NCQ HDD', 'NVIDIA GeForce 8600 256MB GDDR3 SLI', '22" 3000:1 Wide Screen LCD', @OSXTiger 74 EXEC dbo.InsertPC 'Fusion Linux 1', 'Description here ...', 'AMD Athlon 64 X2 6000+ 3 GHz', '1GB Dual Channel DDR2 800 SDRAM', '120GB SATA2 NCQ HDD', 'NVIDIA GeForce 8600 256MB GDDR3', '22" 3000:1 Wide Screen LCD', @RedHat 75 76 SET @Log = @Log + 'Rows In PC: ' + CAST((SELECT COUNT(PCID) FROM PC) AS varchar(10)) + '<br />' 77 78 /* *** Start Insert Inventory *** */ 79 SET @Log = @Log + 'Start Insert Inventory' + '<br />' 80 81 DECLARE @F1 int, @F2 int, @F3 int, @FX1 int, @FX2 int, @FT1 int, @FR1 int 82 SET @F1 = (SELECT PCID FROM PC WHERE Title = 'Fusion PC One') 83 SET @F2 = (SELECT PCID FROM PC WHERE Title = 'Fusion PC Two') 84 SET @F3 = (SELECT PCID FROM PC WHERE Title = 'Fusion PC Three') 85 SET @FX1 = (SELECT PCID FROM PC WHERE Title = 'Fusion X1') 86 SET @FX2 = (SELECT PCID FROM PC WHERE Title = 'Fusion X2') 87 SET @FT1 = (SELECT PCID FROM PC WHERE Title = 'Fusion Tiger 1') 88 SET @FR1 = (SELECT PCID FROM PC WHERE Title = 'Fusion Linux 1') 89 90 EXEC dbo.InsertInventory 10, @F1, 2.5, 'iCluster Fusion One' 91 EXEC dbo.InsertInventory 10, @F2, 2.5, 'iCluster Fusion Two' 92 EXEC dbo.InsertInventory 10, @F3, 2.5, 'iCluster Fusion Three' 93 EXEC dbo.InsertInventory 6, @FX1, 6, 'iCluster Fusion X1' 94 EXEC dbo.InsertInventory 6, @FX2, 6, 'iCluster Fusion X2' 95 EXEC dbo.InsertInventory 10, @FT1, 3, 'iCluster Fusion Tiger One' 96 EXEC dbo.InsertInventory 30, @FR1, 2, 'iCluster Fusion Linux One' 97 98 SET @Log = @Log + 'Rows In Inventory: ' + CAST((SELECT COUNT(InventoryID) FROM InventoryPC) AS varchar(10)) 99 100 RETURN @Log if i remove the last line then all is well. but i get "An SqlParameter with ParameterName '@Log' is not contained by this SqlParameterCollection."
select case when count(convert(varchar(15), customer_id)) = 1 Then 'only one customer' else count(convert(varchar(15), kund_id)) end as no_of_customers, salesperson_id from customerdb group by salesperson_id
...and this is the result I was hoping for
no_of_customers ; salesperson_id 3 ; 1 2; 2 only one customer;3
...but SQL server only returns: Conversion failed when converting the varchar value ...
I am recieving the following error when executing the following code. Field MonData is nvarchar (80), the only integer feild in the concatination is @Cnt all other fields are varchar or nvarchar. If I remove the everything past space(22) it works fine. I double checked the length and it does not exceed 80 bytes. Can anyone see what I am doing wrong?
INSERT INTO tbl_Export Select DISTINCT TOP(1) space(32) + '9' + space(2) + @Cnt + space(2) + Sys + space(2) + Prin + space(22) + 'TEN' + space(1) + 'ZZ' As MonData FROM dbo.Trans WHERE Sys = @vwSys AND Prin = @vwPrin
ERROR: Conversion failed when converting the varchar value 'TEN' to data type int.
-- AssignedToTasks 32,'from (Select Distinct wft.*',' OVER(Order by task.TaskId desc)','','where IsActive=1 AND RecurrenceRule is null',0,5 Alter PROCEDURE [dbo].[AssignedToTasks]
Within in Visual Studio 2012 solution, I have several projects, one of which is a Database project. I am defining several tables. The one in question is:
CREATE TABLE [dbo].[tblKppHierarchyPcl] ( [ID] NUMERIC(18,0) NOT NULL, [Name] VARCHAR(500), [PartStructureKey] NUMERIC(18,0) NOT NULL, [PartNumber] VARCHAR(500) NOT NULL, [ParentPartNumber] VARCHAR(500) NULL,
[code]...
Error SQL72014: .Net SqlClient Data Provider: Msg 245, Level 16, State 1, Line 76 Conversion.failed when converting the varchar value 'Coolant Quick Disconnect' to data type int.So it has a problem with inserting 'Coolant Quick Disconnect' into the Name column. The Name column is CLEARLY a varchar column but somehow it thinks it's an int column.