I have a web page which executes a stored procedure with several parameters. On execution I get an error for the following piece of code. I will be passing null value to the stroed procedure for this parameter "ActiveDate".
Dim parameterActivedate As SqlParameter = objCommand.Parameters.Add("@Activedate", SqlDbType.DateTime)
parameterActivedate.Value = ""
The error is:
System.InvalidCastException: Conversion from string "" to type 'Date' is not valid. at Microsoft.VisualBasic.CompilerServices.Conversions.ToDate(String Value) at webpage.Do_Update(Object Sender, EventArgs e)
I have a table with one of the column(EmpHiredate) datatype is char(10). It has value like "20141023". I need to display this value as date format(dd/mm/yyyy) in report. Following methods i tried in textbox expression but no luck.
Error:[rsRuntimeErrorInExpression] The Value expression for the textrun ‘EmpHireDate.Paragraphs[0].TextRuns[0]’ contains an error: Conversion from string "20041023 " to type 'Date' is not valid.
Is it possible to convert string to date using SSRS textbox expression ?
All source and target date fields are defined as data type "smalldatetime". The "select" executes without error though when used with "insert into" it fails with the error:
Msg 295, Level 16, State 3, Line 25: Conversion failed when converting character string to small date-time data type..I am converting from a character string to smalldatetime since the source and target date columns are "smalldatetime". All other columns for the source and target are nvarchar(255). I assume there is an implicit conversion that I don't understand. In a test, I validated that all dates selected evaluate ISDATE() to 1.
USE [SCIR_DataMart_FromProd_06_20_2014] GO IF OBJECT_ID ('[SCIR_DataMart_FromProd_06_20_2014].[dbo].[IdentifierLookup]', 'U') IS NOT NULL DROP TABLE [SCIR_DataMart_FromProd_06_20_2014].[dbo].[IdentifierLookup]
here is my code the falue of pr_h_reqby is "Test" Dim strconn As New SqlConnection(connstring) Dim myReqdata As New DataSet Dim mycommand As SqlDataAdapter Dim sqlstr As String = "select pr_H_reqby from tbl_pr_header where pr_h_recid = " & recid & "" mycommand = New SqlDataAdapter(sqlstr, strconn) mycommand.Fill(myReqdata, "mydata") If myReqdata.Tables(0).Rows.Count > 0 Then 'lblReqID.Text = myReqdata.Tables(0).Rows("reqid").ToString lblNameVal.Text = myReqdata.Tables("mydata").Rows("pr_H_reqby").ToString() lblEmailVal.Text = myReqdata.Tables("mydata").Rows("pr_h_reqemail").ToString() lblReqDateVal.Text = myReqdata.Tables("mydata").Rows("pr_h_reqdate").ToString() lblneedval.Text = myReqdata.Tables("mydata").Rows("pr_h_needdt").ToString() lblDeptval.Text = myReqdata.Tables("mydata").Rows("pr_h_dept").ToString() txtbxReqDesc.Text = myReqdata.Tables("mydata").Rows("pr_h_projdesc").ToString() End If
Hi,I'm trying to concatenate a Description (nchar(100)) and Date(datetime) as Description and my initial effort was just"...description+' '+open_date as description..." which throws a date/string conversion error; finally came up with a working string belowbut don't think it's the optimal way to do this - any suggestions?select (rtrim(description)+''+rtrim(convert(char(2),datepart(mm,open_date)))+'/'+convert(char(2),datepart(dd,open_date))+'/'+convert(char(4),datepart(yyyy,open_date))) as description fromoncd_opportunity where opportunity_id=?open_date is not a required field at the db level, but it is requiredon the form so it should not be null as a rule.
I've imported a CSV file into a table in SQL Server 2012. It's a large file, 140,000+ rows, so I couldn't covert it to Excel first to preserve the date format due to Excel's row limit. In the CSV file, there were 3 column with date data in "31-Aug-09" format, and the import automatically transformed these in "31AUG09" format (varchar(50)) in SQL Server. Now I need to convert these 3 columns from varchar to datetime so I could work with them in date format.
Hello Friends How are you?? Friends i am getting problem in SQL Server 2005. I am deployng web application on production server as well as Databse also. In production server i inserted new field in all tables which is rowguid and its type is uniqueidentifier. The default binding for this field is newsequentialid(). In some pages it works ok but in some places it generates error like 'Conversion from type 'DBNull' to type 'String' is not valid'. Can anybody help me to solve this problem. Its urgent so plz reply me as soon as possible. I'll be very thankfull to you. Thanks in Advance. Regards,
I am newbie in asp and sql, and I am using VS & SQL expresswhen I try to submit I get following error"Conversion failed when converting character string to smalldatetime data type"Following is my insert statement<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:oncallConnectionString %>"SelectCommand="SELECT data.* FROM data" InsertCommand="INSERT INTO data(Apps, Location, Impact, System, Date, Start_Time, End_Time, Duration, Problem, Cause, Solution, Case, Comments) VALUES ('@DropDownList1','@DropDownList2','@DropDownList3','@TextBox6','@DropDownCalendar1','@DropDownCalendar2','@DropDownCalendar3','@TextBox1','@TextBox2','@TextBox3','@TextBox4','@TextBox5','@TextBox7')"></asp:SqlDataSource>These are @DropDownCalendar1','@DropDownCalendar2','@DropDownCalendar3' defined as datetime in database.I would appriciate if somebody could help.
Hello, I have problem with this code.(This program presents - there is GridView tied to a SQL database that will sort the data selected by a dropdownList at time categories. There are 2 time categories in DropDownList - this day, this week. Problem: when I choose one categorie in dropDownlist for examle this week and submit data on the server I got this error. Conversion failed when converting character string to smalldatetime data type. Here is code: <%@ Page Language="C#" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <script runat="server">
I am running the following query: select distinct hqvend, hqvprd,fprod,idesc,ilead,sum(cast(fqty as int) )as fqty, (cast(hqvend as varchar(5))+'/'+ltrim(rtrim(fprod))+'/'+cast(ilead as varchar(3))) as Keydata,'L1/'+rtrim(fprod) as LocPartno from tblkfpl01 inner join hqtl01 on (fprod=hqprod) inner join iiml01 on (hqvend=ivend and hqprod=iprod) where cast(cast(hqeff as varchar(8)) as smalldatetime) <= (Select CONVERT(varchar(8), getdate(), 1)) and cast(HQDIS as varchar(8)) >= (Select CONVERT(varchar(8), getdate(), 1)) and hqvend like '134%' group by hqvend,fprod,hqvprd,idesc,ilead order by hqvend,fprod The bold sections are giving me the error message. The query works as written above, butis only evaluating on one date, contained in hqeff. However, when I try to modify the second date, HQDIS, by casting it the same way as the one before it: select distinct hqvend, hqvprd,fprod,idesc,ilead,sum(cast(fqty as int) )as fqty, (cast(hqvend as varchar(5))+'/'+ltrim(rtrim(fprod))+'/'+cast(ilead as varchar(3))) as Keydata,'L1/'+rtrim(fprod) as LocPartno from tblkfpl01 inner join hqtl01 on (fprod=hqprod) inner join iiml01 on (hqvend=ivend and hqprod=iprod) where cast(cast(hqeff as varchar(8)) as smalldatetime) <= (Select CONVERT(varchar(8), getdate(), 1)) and cast(cast(HQDIS as varchar(8)) as smalldatetime) >= (Select CONVERT(varchar(8), getdate(), 1)) and hqvend like '134%' group by hqvend,fprod,hqvprd,idesc,ilead order by hqvend,fprod I get the error message. I need to select based on both dates (hqeff AND HQDIS), but cannot seem to be able to it.... Both fields are of type Dedimal, with a length of 8, and dates stored in them look like: 20071003 (YYYYMMDD). Any suggestions?
I have SQL Server 2005 database table with the following data definition as follows:
ID int LST_TIME varchar(5) LST_DATE varchar(21) LST_WEEK int SUBJECT varchar(100)
Date format (Month,day YEAR) eg.- October, 21 2007 Time format, 00 - 23 hours, HH:MM eg. - 18:58
, and a VB code as below:
Dim Command As New SqlClient.SqlCommand("SELECT * FROM dbo.LISTS WHERE (LST_WK = DATEPART(wk, GETDATE())) AND (CONVERT(datetime, LST_DATE) = CONVERT(datetime, CONVERT(varchar, GETDATE(), 110))) AND(CONVERT(smalldatetime, LST_TIME) = CONVERT(smalldatetime, CONVERT(varchar(5), GETDATE(), 108)))", conn)
Dim dataReader As SqlClient.SqlDataReader = Command.ExecuteReader(CommandBehavior.CloseConnection) While dataReader.Read()
Dim NewAlert As New Alert(dataReader("SUBJECT").ToString(), DateTime.Parse(dataReader("LST_DATE").ToString(), DateTime.Parse(dataReader("LST_TIME").ToString())))
: : : I am encountering error: System.Data.SqlClient.SqlException: Conversion failed when converting character string to smalldatetime data type, which points to the codes in bold. Just wondering anyone out there has got a solution to my problem. Thank you.
Recently i traspased a database from sql server 2000 in spanish to sql server 2005 in english. I change the language of the user sa to spanish and the database is in spanish. . The problem is our dateformat is dmy, i try to force with set dateformat dmy, but always i execute a stored procedure that have a date as input it fail. The error is:
Msg 295, Level 16, State 3, Procedure pa_CalendarioGestion, Line 40 Conversion failed when converting character string to smalldatetime data type.
The code of stored procedure in this line is:
set @diaActual = dateadd("d", @i, @fechaInicio)
This stored procedure in sql server 2000 in spanish not have any problems. For this reason i think the problem is in the configuration.
i have a flat file with string column 20060616 . i am converting the string to date (Oracle) i am using the derived column with the following experssion .
while executing the package its failing and throwing the following error
[Derived Column [73]] Error: The "component "Derived Column" (73)" failed because error code 0xC0049064 occurred, and the error row disposition on "output column "JOINDDATE" (124)" specifies failure on error. An error occurred on the specified object of the specified component.
I have been trying to read a flat file which has a birthdate field. The field is string and the format is "011594". I have been trying to convert it to a date field in the following format "01/15/1994". Using the forum I was able to write the following expression but I am still keep getting error messages.
I also noticed few records are missing birthdate and few do not have the complete birthdate which means some birthdates are missing year and some are missing month. For example, some are completely missing and some are partially missing, like " " or "0312 ". Could this be the reason I was getting error message since the following expression does not include null and incomplete date of birth?
[Derived Column [1014]] Error: An error occurred while attempting to perform a type cast.
[Derived Column [1014]] Error: The "component "Derived Column" (1014)" failed because error code 0xC0049064 occurred, and the error row disposition on "output column "DOB" (2292)" specifies failure on error. An error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: The ProcessInput method on component "Derived Column" (1014) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0209029.
I've a text file which having a datetime column value like YYYY-MM-DD-HH.MM.SS.XXXXXX. I cannot convert this is to datetime format from text file using BCP utility.
Presence of hypen "-" between DD and HH, the SQL server does not accept this is as Datetime.
Is there any option to covert the date value in format file in BCP.
I use the derived column to convert a string date from a flat file like this: "Jan 02 2005" into a datetime. I have seen in the forum to use: (DT_DATE)(SUBSTRING(mydate,5,2) + "-" + SUBSTRING(mydate,1,3) + "-" + SUBSTRING(mydate,8,4)) However, even if it produces a string like '02-Jan-2005', the following cast to dt_date fails. I have also tried inverting month and day, year/month/day but all with the same result:
Derived Column [73]] Error: The component "Derived Column" failed because error code 0xC0049064 occurred, and the error row disposition on "output column"...
I think the cast fails bacause of the month format. Therefore the only solution would be to code in in a lookup table Jan, 01 | Feb, 02 |... ????
Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
I am trying to upload data from CSV to Sql table. I have a column as 'arrived_date' value '13:45' etc and while trying to load data i am getting error as "data conversion failed ,truncation may occur while loading data". In flat file connection this column datatype is string but in my table datatype is as time(). There is a error with conversion. I tried to change data type in advanced editor but no use. Using data conversion after flatfile makes my error disappear but it is giving error right at the file not even going through from file?
This is my code and I don't know why this error keeps coming out : PS : I did cursor to execute query.Th error showed is bold:
DECLARE RegCreatedDate CURSOR FOR SELECT DISTINCT (CONVERT(NVARCHAR,CreatedDate,103)) FROM CA_Registration WHERE Month(CreatedDate)= @paMonthIn AND YEAR(CreatedDate)=@paYearIn OPEN RegCreatedDate FETCH NEXT FROM RegCreatedDate INTO @RegCreatedDate WHILE @@FETCH_STATUS = 0
I'm trying to select only July from show_held but I keep on getting the error message saying:
Conversion failed when converting date and/or time from character string.
I get error message after I write this code:
ANDshow.show_held = '&July&'
As you can see from the below code, How do I select July from times_held_in_July?
SELECTevent_name, DATENAME (MONTH, show_held) AS times_held_in_July FROMevent, show WHEREevent.show_id = show.show_id
Result:
event_name times_held_in_July DressageJuly Jumping July Led in July Led in September Led in May DressageApril DressageJuly Flag and PoleJuly SELECTevent_name, DATENAME (MONTH, show_held) AS times_held_in_July FROMevent, show WHEREevent.show_id = show.show_id ANDshow.show_held = '&July&'
Result:
Msg 241, Level 16, State 1, Line 24
Conversion failed when converting date and/or time from character string.
I am trying to write a stored procedure that loops through the list of user tables, gets the record count for each one and write a record to an audit table with DATE, TABLENAME, RECORDCOUNT.I keep getting an error "Conversion failed when converting date and/or time from character string".Here is the script...
DECLARE @table nvarchar(500) DECLARE @sql nvarchar(520) DECLARE CursorSelect CURSOR FOR select table_name from INFORMATION_SCHEMA.tables where table_name not like 'sys%' order by table_name
I'm trying to convert a column from a varchar(14) to float, some of the rows contain some non-numeric characters. I've tried to write a cursor to step through the records, run cast(col1 as float) on each record, then use if @@error <> 0 to capture an error but it doesn't work. It steps through fine but when the cast command fails it ends the execution of the script with "Error converting data type varchar to float."
How can i capture this error without having the script fail? Is there another way to get this done?
I am trying to put the data from a field in my database into a row in a table using the SQLDataSource.Select statement. I am using the following code: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'" myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)But when I run the code, I get the following error:Server Error in '/YorZap' Application. Unable to cast object of type 'System.Data.DataView' to type 'System.String'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.Source Error: Line 54: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'" Line 55: 'myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments).GetEnumerator.Current, String) Line 56: myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String) Line 57: Line 58: filesTable.Rows.Add(myDataRow)Source File: D:YorZapdir_list_sort.aspx Line: 56 Stack Trace: [InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.] ASP.dir_list_sort_aspx.BindFileDataToGrid(String strSortField) in D:YorZapdir_list_sort.aspx:56 ASP.dir_list_sort_aspx.Page_Load(Object sender, EventArgs e) in D:YorZapdir_list_sort.aspx:7 System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +13 System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +45 System.Web.UI.Control.OnLoad(EventArgs e) +80 System.Web.UI.Control.LoadRecursive() +49 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3743 Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210 Please help me!
