Convert Field From VarChar To Int With Speical Characters In Field
Aug 29, 2007
Hello,
I have a table with a column that is currently a varchar(50), but I want to convert it into an int. When I try to just change the type in design mode I get an error that conversion cannot proceed. When I look at the field it appears some of the entries have special characters appended at the end, I see a box after the value.
How can I remove all speical characters and then convert that field to an int?
Also I tried the following query which did not work as well, same error about conversion.
Hello all,I have a field defined as VARCHAR(8000) yet it only accepts a maximum of 1024 characters. Does anyone know how I can save 8000 characters in a single field?Thanks,Bill.
Hopefully, someone can help me. I am working with a database that contains multiple fields within the tables that are being used for Clinical notes. The fields are defined as VARCHAR(3500). But when I try to extract data (either through Query Analyzer or Crystal Reports), only the first 256 characters are displayed. I ran a query to give me the length of the maximum entry size which returned 2722 characters, yet only 256 are displayed.
How do I go about extracting ALL of the data from this field? Any help is much appreciated.
how i convert varchar sal field to numeric in query select sum(sal) from emp1 error:the sum or average aggregate operation cannot take a varchar data type as an argument.
Can anyone help me on this!I've got more than a 1000 records in a SQL server database.The problem is that the the date field is set to varchar, and that gives a lot of trouble. (for example by sorting a table, it's a mess)How can i make sure that i will have a table with the date field set to datettime en that those 1000 records still will be in it. thanks in advance!
I need to handle this conversion in SSIS and not on oracle.
The following expression is executed on a datatype of dt_str with a length of 8000.
SUBSTRING((DT_STR,8000,1252)Column_name,1,8000)
Records longer then 4000 bytes take an error path
The next expression with 4000 bytes works but there is truncation.
SUBSTRING((DT_STR,4000,1252)Column_name,1,4000)
Basically I need to know how to cast a text or ntext into a varchar or nvarchar using ssis but I need to capture the first 8000 byes without truncation.
is this possible?
Using SSIS Reading From oracle I can convert to a text or ntext field but I am having a hard time going directly to a varchar.
I'm trying to convert a column in my source table of datatype varchar(6) to a column of datatype int in my destination. I tried using the Derived Column/Data Conversion transformations but none of them worked. So, I tried using the following C# (credits to the original poster) and getting an error during compilation.
Note: "MyCol" is the Input Column I've specified in the Script Component and "CleanCol" is the Output column I've specified as datatype [DT_I4].
public override void Input0_ProcessInputRow(Input0Buffer Row) { int colOut = 0; if (!Int32.TryParse(Row.MyCol, out colOut)) { Row.CleanCol_IsNull = true; } else { Row.CleanCol = colOut; } }
The best overloaded method match for 'int.TryParse(string, out int)' has some invalid arguments
The other expression I've tried was:
ISNULL(MyCol) ? (dt_i4)"" : (dt_i4)MyCol
From the above code, you might have understood that the source field has some blank records as well in the MyCol field.
What is the best possible way to do the conversion from a String to Int or fixing the error from the above.
I need to pass in null/blank value in the date field or declare the field as string and convert date back to string.
I tried the 2nd option but I am having trouble converting the two digits of the recordset (rs_get_msp_info(2), 1, 2))) into a four digit yr. But it will only the yr in two digits. The mfg_start_date is delcared as a string variable
option 1 I will have to declare the mfg_start_date as date but I need to send in a blank value for this variable in the stored procedure. It won't accept a null or blank value.
In my application I must store over 16000 character in a sql table field . When I split into more than 1 field it gives "unclosed quotation mark" message. How can I store over 16000 characters to sql table field (only one field) with language specific characters?
Does anyone know a function in SQL or how I can get the amount of characters of a field?
I have a column named NU_IPS wich contains data varchar type, that has a % symbol at the end, like 9.7% and so on... But in original table it can't be like this (it has to bem float type), I just want the number content, like this 9.7 For that I need in DTS put a query that convert it. That's why I need a function or something that can get the quantity of characters of each field.
So, It would be someting like this...
select substring(convert(varchar(getSizeField() - 1), nu_ipi), 1, 4) from dbo.t_STAGEAREACHAIR
It would cut always the last caracter, wich is '%'...
I have a sql database that includes a table of customer contact information. The area code for many of my customers is about to change. Is there a way to mass update the phone number field so that all phone numbers that currently start with 111 change to 222 ? Ex 1115554444 to 2225554444 ?
I have a table in sql server that has a field with numeric characters, i would like to select some but not all characters from this field and insert it into a new field. The field that i want to get some characters from has other characters that i dont need, It has a lot of zero's next to the numbers that i need. so far i created a stored procedure, but its not working. I want to extract the characters and insert them into a new field in the format "000.00" or "00.00". The values are either hunderths or tenths, which makes it difficult for me to decide which characters to ignore. Please see my SP created so far below:
CREATE PROCEDURE dbo.spUpdatePaymentDetails AS UPDATE dbo.PaymentDetails SET NewAmount = SUBSTRING('00' + TransactionAmount, 1, LEN('00' +TransactionAmount) - 2) + '.' + SUBSTRING('00' + TransactionAmount, LEN('00' + TransactionAmount) - 1, 2) GO
the character "." is not in the original field so therefore i would like to insert it into the new field.
hey, what the best way of stripping out a list of characters from a specified field in a table. e.g If first name consists of ABCD'E-FSA, we wnat to strip the ' and the -. There is about 15-20 characters like that. what's the best way of doing it other encapsulating in the replace function that many times. thanks zoey
I am developing a message board using ASP on IIS and SQL Server 2000, and I am running into a problem.
When a user enters their post, they enter their user name, subject, and of course all of their post content. Now the post content should be an unlimited number of characters since it could end up being multiple paragraphs.
I know I could just use an ASP file system object and write the text to a file, but I wanted to save all of these paragraphs as a field in a database table so I could pull it from the database so it could be edited by the user.
Is there a way to make a field be able to take in an unlimited amount of characters?
Or is this the wrong way to do things; is it bad to have an unlimited amount of characters in a table field? Should I stick to using the ASP System File Object?
I have a large table, tblMessage, which stores e-mail messages in textfields. I need to remove the carriage returns the data in these fields,but I have not yet figured out how to do so.I thought that the way to do this would be with the REPLACE function;unfortunately, of course, the REPLACE function cannot work with TEXTfields. I tried CASTing the text field to VARCHAR(8000); however, someof the rows have more than 8000 characters in the text field, so it bombs.Here is the SQL that I tried:selectmsgID,msgSent,msgFromType,msgFromID,msgSubject,REPLACE (CAST(msgMessage AS varchar(8000)), CHAR(13), '<BR>') ASnewMessage,msgOriginal,attIDinto tblMessageNewfrom tblMessageI'm at my wit's end. Truncating the text field to 8000 character is anacceptable option, but I can't even seem to be able to do that.I'm using SQL Server version 7.
I am using the following expression to strip the last 11 characters in a field group and it returns an error saying that Len cannot use a negative number. It must be 0 or greater. Is there a better alternative?
I need to pull address info and need to match customername from a spreadsheet. Due to bad design, in our database instead of having a 'status' for the customer, they just added ' - ACCOUNT CANCELLED' to the customername
I am having an interesting error. I have a bunch of data that I am updating to a field in my sql server 7.0 database. It updates the data, however only puts the first 64,999 characters into the field. The datatype is ntext. From what I understand, ntext datatype can hold much more than 65,000 characters. Am I right in this? The data I'm putting into the field is html tags/text. I've tried several different data sets. I'm updating the data using Coldfusion/SQL commands.
Here is my SQL syntax:
UPDATE htmltest SET html_offline = '#form.html#' WHERE htmlid = #form.htmlid#
When we are getting data in a table and we want to replace characters with other characters. For example, We have a table with a street address, and there are numerous ascii character values we want to review and replace if they exist. We were looking at using a table with 2 columns, 1 containing each ascii character value the other it's preferred replacement value. Then updating the street address searching through each ascii character and replacing it if needed. Currently, we are running it through a looping process searching each individual address for each ascii character, and updating it.
Hi guys I need immediate help with a query that I am trying to write. I want to sum the values in a query but the field has a type of varchar and it has decimal numbers too. So if I do the query something like that, that converts the field to int, I get the error message. I tried converting it into real or float but I get error message on that too. I need help with adding the calculatedValues and getting there sum. I would appreciate any help with that.
Thanks -Sarah Select SUM(Convert(int, calculatedValue)) from monitor.dbo.monHistory where LocalTimeWithoutDst > '8/26/06' and LocalTimeWithoutDst < '8/28/06'
This is the error message I recieve: Conversion failed when converting the varchar value '274.2' to data type int.
After reading Dan Guzman's blog entry (http://weblogs.sqlteam.com/dang/archive/2008/02/21/Dont-Bloat-Proc-Cache-with-Parameters.aspx) I started modifying some of my code to try it out and ran into a stumbling block. What size would you specific for a varchar(MAX) field? Since a varchar max field can hold up to 2 billion chracters I really don't think I need to specify 2 billion as the size. Anyone have any ideas?
I have a varchar column which containd comma delimited values like Rec# Fruits 1 Apple, Peach, Strawberry 2 Orange, Mango 3 Banana, Grape ...........
Now i have to add search facility so that a user could search for more than 1 fruit at a time. I have a Stored Procedure which returns records from this table. that SP has a Parameter @SearchFruit Varchar(500) and the user could pass in values like 'Apple, Mango' to this parameter.
Now how should i write the SQL so that i get back the records Rec# 1 & 2 since apple is there in 1st record and mango is there in the 2nd ??
I know if a put the comma delimited values as individual records in a temporary table and also do the same for the parameter values then i can get the desired results. But i want to avoid doing that. Any other way ?
I would like to append information to a varchar field with an update statement, for example the field currently contains a name (Mark) and I would like to add information to name for business purposes, to update it to Markqw215, is this possible to do with an update statement? Thank you.
I would like to append information to a varchar field with an update statement, for example the field currently contains a name (Mark) and I would like to add information to name for business purposes, to update it to Markqw215, is this possible to do with an update statement? Thank you.
I'm importing data from a text file into SQL as a varchar, and I'm leaving it a varchar in its final destination table. It is essentially a price, i.e., $25.65. I'm using this price field (varchar) to perform a calculation...
Everything seems to work OK, but I'm not sure about using this varchar field to perform this calculation. Is this doable, or should it absolutely be converted to say, decimal?
