Hi,
I have an user input variable called @stop_time which takes input in the format of HH:MM:SS.
I need to convert it into seconds only.
declare @start_time datetime
set @start_time ='02:15:00'
How can I do that?
Can anyone help please?
Hi all.If I've got a query which has a field with seconds in it... how will I usethe Convert function to get my field converted to the format: HH:MM:SS ?The field with the seconds in is called: "Diff"Thanks alotRudi
View 2 Replies View RelatedHello every one I have a column in my table which stores seconds.
I want to convert the value into Days:Hours:Minutes:Secons(DD:HH:MM:SS) format.
Can anybody please tell me how to do that.
The value of seconds wil be large (eg. 16798563,..and so on) SO how to I convert this value to the format I need.
URGENT PLZ
Regards
Mohsin Iqbal
How to Convert Seconds (i.e., 114) to hh:mm:ss format,
is there any way.. i've a column (DURATION) which is recorded in Seconds
AND USER wants to see the seconds in hh:mm:ss 00:14:28
pls.help
thanks
Hi, I have a field with seconds in it, and I need to convert this so that it shows in the format hh:mm:ss. Is there an easy way to do this?
Thanks in advance,
Ben
Hello,
How would one convert HH:MM:SS to Seconds?
Thanks in advance!
--Phb
--PhB
Hi,
I have an user input variable called @stop_time which takes input in the format of HH:MM:SS.
I need to convert it into seconds only.
declare @start_time datetime
set @start_time ='02:15:00'
How can I do that?
Can anyone help please?
I have values in seconds (integers) in a database column and I want to convert those values to datetime. For example: 102 into 1:42(60 seconds = 1 minute + 42 seconds = 1:42), 150 into 2:30, etc.
I've been working for hours today on this, but haven't been able to come up with a solution.
I want to calculate total sum of column.
I have a table with many values of column:
declare @time table
(times nvarchar(255))
INSERT INTO @time (times)
Select ('05:01')
UNION ALL
Select ('00:01')
UNION ALL
Select ('170:01')
UNION ALL
Select ('2543:01')
Select * from @time
How can I get seconds value for every row?
05:01 - 301
00:01 - 1
170:01 - 10201
P.s. Finally I use - Select convert(char,dateadd(second,152581,60),108) as sumtime
I need to convert 300.876 to 5:00.876 in classic asp. Can anyone help?
View 1 Replies View RelatedHi
I have a field (int) thats a value in seconds.
I need to add it to a datetime value to get a finish time ..
how can i convert it to datetime (baring in mind its seconds)
so far any conversion i do converts it to days...
Hello,
I have been trying for a while now to convert seconds which are obtainted from the database into the format mm:ss.
Typically in Excel, I convert my time in integer values divided by 86400 (24/60/60) and then format the cell to "mm:ss" and everything is fine. Now, I am have been trying to reproduce that same logic using Reporting Services (2000) without any success.
I saw on previous post that you can use the format property in RS but if I put in the code "mm:ss" I get the value in text "mm:ss" (i.e.: not the numbers converted).
Any ideas???
converting seconds to HH:MM:SS using SSIS. I know how to do it in T-SQL.
View 13 Replies View RelatedI have a column of data that is the number of seconds. I need to format this column into the HH:MMS format. If there are 130 seconds the second column should read 00:02:10. How can I accomplish this in report builder or is it even possible in Report builder? I can use the following formula in SQL but is there a way to do it in Report Builder?
CONVERT(varchar(6), talktime / 3600) + ':' + RIGHT('0' + CONVERT(varchar(2),
talktime % 3600 / 60), 2) + ':' + RIGHT('0' + CONVERT(varchar(2), talktime % 60), 2)
Thanks
I have a Stored Procedure that has a query in it and it take 0 second and then a stored procedure that takes 16 seconds. From what I can tell they shoul be the same.
It doesn't recompile when i run the stored procedure, I checked that.
I am really confused and I can’t concentrate. Please help me with this easy question:
I have a field which contains seconds for example 128460 I need to have how much hours is that in my Query.
Please Help me.
Sep
I'm using a stored procedure that outputs a field of duration in seconds... I'm limited in that I cannot edit the stored procedure to alter the output but I need to convert this duration to hh:mm:ss. Is there a way to do this using the expression editor in RS 2000?
Many thanks.
Does anyone know if you can shedule a dts package to run every 10 seconds ?
I can see that you can create a job but this only has the option for the earliest run set to 1 minute.
Any advice
Ian
I have a result that comes out in number of seconds, but need to see it converted to minutes and hours and seconds. Is there a convert function that would do this?
Thanks,
Dan
Hi,
i have a huge table.One of the columns of the table is fTime, which is datetime data type. But there is NO seconds in the fTime column. What i wanna do is to add seconds to this column according to the example below;
2006-07-24 18:10:00----> 2006-07-24 18:10:00
2006-07-24 18:10:00----> 2006-07-24 18:10:59
2006-07-25 10:20:00----> 2006-07-25 10:20:00
2006-07-25 10:20:00----> 2006-07-25 10:20:15
2006-07-25 10:20:00----> 2006-07-25 10:20:30
2006-07-25 10:20:00----> 2006-07-25 10:20:45
2006-07-25 10:20:00----> 2006-07-25 10:20:59
2006-07-25 12:00:00----> 2006-07-25 12:00:00
2006-07-25 12:00:00----> 2006-07-25 12:00:30
2006-07-25 12:00:00----> 2006-07-25 12:00:59
Shortly, as you can understand from above, the first second should be 00, the last second should be 59 and the rest will be calculated by, 60/count of same fTime rows - except the last row. There is one important thing to consider, which is the speed of the statements which include those calculations because of the huge number of rows i my table.
thanks
HiI am trying to use the WAITFOR function to make each loop in a cursoroccur every 4 seconds until the curdb is emptythe prtocedure is as follows---------------- startcreate procedure q_additionalrabatt@additionalrabatt float,@ordernr intASdeclare @ordradnr intdeclare curdb cursor for select ordernr, ordradnr from orp whereordernr = @ordernrfor read onlyopen curdbfetch curdb into @ordernr, @ordradnrwhile @@fetch_status = 0beginupdateorpsetorp.rabatt1 = (orp.rabatt1 + @additionalrabatt)whereorp.ordernr = @ordernr andorp.ordradnr = @ordradnrfetch curdb into @ordernr, @ordradnrendclose curdbdeallocate curdb------------------- endI need to make sure, that before it fetches the next row it waits 4seconds before executing the next loop.Matt
View 1 Replies View RelatedI have the following SQL query where i want thease to be populate to GridView, but the Duration field is in Second format, I want it would be in HH:MM:SS format.
cmd = "select subscriber_id as Subscriber_no,,amount,duration from MyTable" ;
Please help me how to format this within the Query to display in GridView.
Hi all,
can someone give me some advise on how to troubleshoot this.... thanks.
Here is the situation:
We have a server running nicely for the past 1 years. And just yesterday, things started to acting very slow.
A simple query that will return one row:
"select * from product where itemno = 1234 and visible =1"
will take 20 second sometime 30! The weird thing is.. it only happens intermittently. The table also only contain 4000 rows. so its not even a big table. I am not sure if this is caused by lack of memory or what (256mb ram, p4 1ghz on this server).
The system cpu usage % avg around 3-8%. but when that weird behavior started. All the other queries will wait for it to finished and then burst the cpu usage up to 100%. Afterward, it will level off and then the cycle repeat again.
I'm just hoping if anyone can give me a few pointers as of where to troubleshoot. I've tried rebuild the index on that table but it didn't help. This weird behavior not only happen on this particular table, but also on different db within the same server. (note: they are small dbs only)
p.s. here is the site that is running on this db, you'll see this weird delay after a few click on the pages.
http://www.animepot.com
Thanks you for your time,
Derick
forgot to mentioned, the sql server is 7.0
Hi,
How can I make a query and group the registries in a interval of 30 seconds...like
for each line I have a datetime field that have all the day, and I need it to return just like
TIME Contador_type1 Contador_type2 Total
01-01-2006 00:00:30.000 2 5 7
01-01-2006 00:01:00.000 3 7 10
It's just an example...but that's the result that I need and my table is
data_hora -- datetime field
tipo - 1 or 2 -- count
nrtelefone - that's is the number dialed.
Thanks
Is there anyway of including/excluding some javascript to reload the report (with the parameters the user has chosen) on an automatic basis?
View 1 Replies View RelatedHello,
Today I ran a query from my ASP page that returned with an error message stating my command had timed out. Fine. I searched the forums (thank god for the internet), and added cmd.CommandTimeout = 120. Great! That solved my problem.
My question is that from everything I read, the command timeout is set to 30 seconds by default. Yet my query runs in 5 seconds or so with the property set, but wouldn't run at all without it. Is it possible my command timeout was set somewhere else to less than 30 seconds? It's almost as if the server THOUGHT it would take longer than 30 seconds, and gave up, before actually running the query (which has all needed indexes to make the query fast). I just don't understand why I was getting this error for what turns out to be a 5 second query. When I shorted the query to 4 seconds or so (reducing the date range for the report), it ran fine in 4 seconds without the timeout error. So basically, going to 5 seconds or more caused this error. Where are the other places that the CommandTimeout property might be set? On the SQL Express database itself? I didn't see any ASP.NET config properties addressing it. Is there somewhere else I can look?
Thanks!
Michael
I have a field in nvarchar type. It contains data like 0, :23, 1:57, ... all in minutes and seconds. Now, I need to convert it to MM:SS using query and get the Average of this column. How can I do it? I have tried Avg(Convert(nvarchar(20), [Calling Time], 108)) .. but I got error : The average aggregate operation cannot take a nvarchar data type as an argument.Help!!!! :(
View 1 Replies View RelatedI have a field with seconds in it and I need to disply it in hours which I can do by dividing it by 3600, but I am trying to figure out how to round it up to the nearest 15 minutes. I have tried a couple of things with ROUND and CEILING, but am not getting the right numbers back. Any help would be greatly appreciated.
View 3 Replies View RelatedHello there,
I am programming with visual basic and I have a large query wich takes too long for execution. After 30 seconds I get a timeout error.
Is there any way to raise the timeout to 90 seconds or something.
I'm using the following connection string to connect to the database.
Provider=SQLOLEDB.1;Connect Timeout=2;Password=****;Persist Security Info=True;User ID=user;Initial Catalog=test;Data Source=sqlserver
thank you
i have an aplication with any problems, the aplication is hang and in the log is
SQL Server has encountered 1 occurrence(s) of IO requests taking longer than 15 seconds to complete on file [d:Program FilesMicrosoft SQL ServerMSSQLdata empdb.mdf] in database [tempdb] (2). The OS file handle is 0x000003DC. The offset of the latest long IO is: 0x00000016930000 and the aplication log is
E R R: [Microsoft][ODBC SQL Server Driver][Shared Memory]ConnectionWrite (WrapperWrite()). NUMERO -2147467259 FUENTE Microsoft OLE DB Provider for ODBC Drivers
can yu help me
I have a column that is an int field and it holds the number of seconds that corresponds to a time during the day. Example being that 24331 will be 6:45:31 AM and 67531 will be 6:45:31 PM. I'm looking for code that will show the time in AM/PM format and with the AM and PM at the end of time.
View 5 Replies View RelatedHi all...I've got a group of tables and I wanted to first see which tablescontained a fields containing the "Date/Time" data type. And I wassuccessful in doing so...here's the query:(select a.name tablename, b.name colnamefrom sysobjects a, syscolumns bwhere a.name = object_name(b.id)AND B.TYPE = 61 AND A.XTYPE = 'U')Now...my only issue is find which query I can run (On each table)which returns to me ONLY the values containing the date/time stampwith milli seconds (Ex: 01/01/2007 10:10:50:987)I require this since we are planning on shifting those tables to theOracle platform, and we've had issues doing this while loading theextracted information, since it was not taking the values containingthe "milliseconds".Is there a way to do this? Or is it better to simply remove themilliseconds all togeather? I wouldn't mind doing so provided that itdoesn't includes changes to the actual data type.
View 1 Replies View RelatedI have rows of data that have a datetime stamp. I need to find rowsthat have a datetime stamp within 10 seconds of the top of each hour.I started with datediff(s,getdate(),LeadDate) but I am stumped on howto process for each hour.I.E. records between 9:00:00 and 9:00:10 , 10:00:00 10:00:10, and soforth for each hour.Ideas?
View 1 Replies View Related