Convert Query From OLEDB To ODBC (Receiving Error)
Jan 10, 2008
I have the following query for my site which was functioning great using the OLEDB driver. Unfortunately, my client's web host forced us to use ODBC and it is no longer working Any suggestions for what I should do?
Here is the query:
SELECT t.*
FROM (SELECT TOP 10 itemnum, itemnum FROM (
SELECT TOP 100 itemnum, itemnum
FROM(CatView)
WHERE [CATALOG PAGE] LIKE 'SM%'
ORDER BY itemnum ASC) AS foo
ORDER BY itemnum DESC) AS bar INNER JOIN CatView AS t ON bar.itemnum = t.itemnum
ORDER BY bar.itemnum;
Here is the error i'm now receiving:
ERROR [HY000] [Microsoft][ODBC Microsoft Access Driver] The specified field 'itemnum' could refer to more than one table listed in the FROM clause of your SQL statement.
I know it was working great before, so i'm not sure what to do.
Michael
View 3 Replies
ADVERTISEMENT
Mar 12, 2008
We are experiencing failures when accessing a datatype="Attachments" field in a query in an MS Access 2007 database using ACE ODBC or OLEDB drivers.
We are using an MS Access 2007 database
ACE ODBC/OLEDB drivers installed (i.e. Office 2007, which installs these drivers)
DB contains a table with a field of type "Attachments" (which is new in MS Access 2007)
DB contains a query that selects the fields of the above table
Using ACE ODBC or ACE OLEDB drivers to display the table works fine. The "Attachments" field is displayed as the file name of the attachment(s).
However, using either ACE ODBC or ACE OLEDB to display the query (i.e. NOT the table) results in either incorrect results or unexpected failures of the ODBC/OLEDB drivers.
Error using ODBC (using "ODBC Test"):
=============================
select * from Query1 does not give an error, but displays a "1" for the Attachment field.
select Attachments from Query1 gives the following error:
stmt: szSqlState = "HY000", *pfNativeError = -3087, *pcbErrorMsg = 97,
*ColumnNumber = -2, *RowNumber = -2
MessageText = "[Microsoft][ODBC Microsoft Access Driver] Reserved error (|);
there is no message for this error."
Error using OLEDB (using "RowSetViewer"):
================================
select * from Query1 gives the following error:
Interface: Unknown
Result: 0x0004001 = E_NOTIMPL
FormatMessage: €œNot implemented
File: F:DepotSQLVaultmdac28sdkSamplesoledb
owsetviewerSDKobji386CRowset.cpp
Line: 616
select Attachments from Query1 gives the following error:
Interface: IID_ICommand
Result: 0x0004005 = E_FAIL
IErrorInfo: [0x0000f3f1] €œUnspecified error€?
File: F:DepotSQLVaultmdac28sdkSamplesoledb
owsetviewerSDKobji386CCommand.cpp
Line: 439
If it would help to analyze the problem, I have a folder containing all pertinent files (bare-bone database, tools, instructions) to reproduce this. I could attach it as a ZIP file, if requested.
Thanks,
Joe
View 1 Replies
View Related
Aug 8, 2002
Is anyone using OLEDB instead of ODBC? If so why did you choose to use OLEDB vs ODBC? Our application is written in VB and we have a developer that believes switching to OLEDB from ODBC would be beneficial to us. Please give any information that you have! Thanks.
View 1 Replies
View Related
Jan 13, 2004
I am working on a large ASP application(s) which uses SQL Server 2K on the back end, ADO 2.7 for Data Access. The current connection strings are setup to use older ODBC drivers. I wanted to change them to OLEDB for performance gains and better support in the future.
The problem encountered is that once the driver is changed the pages become riddled with errors. There are many piece of ADO code that are supported using the new driver. Many are cursor issues or code dealing with identity columns.
Has anyone else gone through this process?
Is there a comprehensive listing of those methods that are not compliant between these two drivers?
Any input would be appreciated....Thanks
View 5 Replies
View Related
Feb 6, 2007
I want to know the difference between SQL ODBC and SQL OLEDB.
View 1 Replies
View Related
Feb 6, 2007
What are ODBC and OLEDB
1)libraries or
2)standards
View 4 Replies
View Related
Oct 10, 2006
Hi all,
I got an error when i do an OLE db Source pointing to an sql 2000 database and executing a sql query inside the OLE Source. The ole source will point to an OLE DB destination which is an sql 2005 database.
But i got the below error:
Error at Data Flow Task [OLE DB Destination [245]]: the column firstname cannot be processed because more than one code page (936 and 1252) are specified for it.
Error at Data Flow Task [DTS.Pipeline]: "component "OLE DB destination" (245)" failed validation and returned validation status "VS_ISBROKEN".
Error at Data Flow Task [DTS.Pipeline]: One or more component failed validation.
Error at Data Flow TaSK: There were errors during task validation.
(Microsoft.DataTransformationServices.VsIntegration)
View 5 Replies
View Related
Jan 12, 1999
We are trying to extract data from DB2 on an as400 machine. Can we simply use SQL statements to extract the proper data that we need from as400 using the SQL Server 7.0 functionality? How do we do that?
We think this needs to be done via DTS(Data Transformation Service).
Thanks in advance.
Shaikh & Sande.
View 1 Replies
View Related
Mar 6, 2006
i notice that in toolbox panel, there are these kind of different dataadapter and dataset, what is difference between them, and under which situation we use which one?
View 2 Replies
View Related
Oct 24, 2007
After installing sql2005 sp2 a simple select query to a linked server reports the following error message:
Msg 0, Level 11, State 0, Line 0A severe error occurred on the current command. The results, if any, should be discarded.Msg 0, Level 20, State 0, Line 0A severe error occurred on the current command. The results, if any, should be discarded.
Before installing SP2 we used sql2005 without any service packs, the linked server worked fine.
The linked server is a Visual FoxPro database.
After uninstalling and installing the 'Microsoft OLE DB Provider for Visual FoxPro 9.0' the issue stil remains.
View 3 Replies
View Related
Nov 20, 2007
Hi.
I am stuck with error: An error occurred while receiving data: '64(error not found)'.
My Service Broker configuration:
Server A initiator,
Server B target.
Server A sends message to Server B, Server B sends back reply.
On this stage I receive problem. Server B message does not come to server A.
It stays on sys.transmission_queue on server B.
This problem occurs only during initial setup. During initial setup, on Server B messages, queues, services, contracts, routes, bindings are created. On Server A: routes and bindings. As a last step, a message is sent to Server B.
So, reply on this message never comes. Initial setup is run using procedure with execute as €˜owner€™, owner=€™dbo€™.
But, whenever I send messages after that, everything works fine.
Any suggestions?
Please :-)
View 7 Replies
View Related
Jan 23, 2006
i get this error when i try to connect to sql server 2005 developer edition with the latest JDBC.
sql string =>> jdbc:sqlserver://localhost:1434;databaseName=c1 Elvis elvis
SQL STATE: 08S01
ERROR CODE: 0
MESSAGE: An I/O error occurred while receiving the TDS prelogin response.
And the stacktrace is:
com.microsoft.sqlserver.jdbc.SQLServerException: An I/O error occurred while receiving the TDS prelogin response.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
at com.microsoft.sqlserver.jdbc.DBComms.Prelogin(Unknown Source)
at com.microsoft.sqlserver.jdbc.DBComms.<init>(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
and is called :connection=DriverManager.getConnection(con, user, password);
Please tell me what is wrong ? Because in other part of the code it works fine !
What is this "I/O error occurred while receiving the TDS prelogin response" ?
View 12 Replies
View Related
Oct 31, 2007
Hi,
I have set up SB between 2 databases, and I keep geting a variety of error messages in the queue on both sides. The first is:
An error occurred while receiving data: '10054(error not found)'.
And on the other side its
Service Broker received an error message on this conversation. Service Broker will not transmit the message; it will be held until the application ends the conversation.
The only difference between this and the tutorials is that the TCP port have been moved to 4321 instead of 4022, and this has been done both sides, because something else was blocking the 4022 port. This one is definately free on both sides. I have recreated the certificates, the users, the end points, the queues and the services multiple times, and checked them all in the sys.routes etc and they all seem fine.
I do also get a message in the queue that I can receive sometimes that tells me I don't have rights to the service on the other machine. I can send a message to itself and it doesn't complain.
Both machines are on the same domain, and I have also tried to grant rights to public to no avail.
Help!
TIA
Ian.
View 2 Replies
View Related
May 5, 2008
I have recently switched from ODBC to OLEDB and I have noticed a difference in the way these two handle local temp tables. With ODBC the scope of the local temp tables is the connection in which they were created (unless they are created in a stored proc, in which case the scope is the stored proc). That means you can create the temp table in one statement, fill it with data in another and retrieve the data in the third, and everything works fine as long as these statements are bound to the same connection. I have used this in a few places in my applications as a way to store connection specific data and a way to simplify some other things.
But now I have a problem. In OLEDB the scope of the temp tables is the session it was created in and that is not good for me since I can not store connection specific data in temp tables any more.
Any ideas?
Thank you!
View 1 Replies
View Related
Aug 23, 2007
We are using Service Broker to synchronise two databases using async triggers (using a middle server to preform data mapping processing). We are re-using dialogs as we want to ensure order when sending messages which contain the data to be synced. A dialog is created between each intiator and target service (there are 3 of each) which is kept open indefinately (we are only ending conversation upon receiving an end conversation message or error message).
We seem to get it working for a period then after about 1 hour it seems to stop sending and we see the following error in SQL Profiler:
An error occurred while receiving data: '64(error not found)'
Any ideas what could be causing this? We do not see any errors or end conversations. It seems to happen at irregular points.
View 2 Replies
View Related
Jan 6, 2004
Hello,
I have a SQL Server instance on my local computer and an Oracle
Database on a remote server. I want to run queries from tables
within both databases and am using linked servers to accomplish
this.
I configure my linked server in SQL Server using the Microsoft
OLE DB Provider for Oracle and can run queries using sql server
tables and oracle tables. However, even the simplest queries
take more than 10 minutes to run.
I have the Oracle 9 Client Installed and MDAC 2.7. I configured
my registry settings to match oracle 9's settings.
However nothing i do improves the performance of the queries
through the Microsoft OLEDB Provider for Oracle.
When I use MS Access, or use an ASP page with the following
string:
Set objConn = Server.CreateObject("ADODB.Connection")
objConn.Open "dsn=Oberon;uid=mfs;pwd=mfs;"
I implement the ODBC driver that I configured in my system DSN
and both run the same queries very fast. The data comes back
without a problem.
So i believe I have narrowed down my problem to the OLEDB
Provider. However, SQL Server does not give me a choice to use
the ORACLE native ODBC Provider.
So then I tried using Pass-Through Queries and this worked alot
faster in SQL Server...I am completely confused as to whats
going on.
Linked Server Query that takes over 10 minutes:
SELECT * FROM OBERON..LOGS.DATA_PHOTO ldp where Machine=301 AND C3='I051097';
Pass-Through Query that works faster:
select * from Openquery(OBERON, 'SELECT * FROM LOGS.DATA_PHOTO ldp where MACHINE=301 AND C3=''I051097''')
From researching pass through queries, my understanding is that
it actually uses ODBC to give the whole query to the remote
database where the query is then run and the results are passed
back as a table, thats why you say select * from (query)...however if my understanding is correct, then you cant combine tables in different databases very easily. And will it work with .asp and .aspx pages?
Anybody have any insight as to whats going on?
View 1 Replies
View Related
Jan 18, 2005
Hi,
I'm attempting to use the SQLExecute function to make a query to a SQL Server DB through ODBC.
However, the column I am trying to retrieve is called "date". When I try and query, I get back the message, "S0022: Invalid column name 'date'".
I believe I'm getting the error because date is a sql keyword (however if I run the query directly through SQL Interactive, I do not get a problem).
If anyone knows how I can get around this problem, that would be very helpful, as it is not possible to change the column name.
Thanks in advance.
Khalid.
View 7 Replies
View Related
Jul 27, 2005
I am in the middle of creating an editable DatGrid:
Sub AccessoryGrid_EditCommand(source As Object, e As MxDataGridCommandEventArgs)
AccessoryGrid.EditItemIndex = e.Item.ItemIndex
End Sub
Sub AccessoryGrid_BeforeUpdate(source As Object, e As MxDataGridUpdateEventArgs)
e.NewValues.Add("@AccessoryID",
AccessoryGrid.DataSource.DataSource.Tables(0).Rows(e.Item.DataSetIndex)
("AccessoryID"))
e.NewValues.Add("@AccessoryName", CType(e.Item.Cells(1).Controls(0),TextBox).Text)
e.NewValues.Add("@AccessoryPrice", CType(e.Item.Cells(2).Controls(0),TextBox).Text)
e.NewValues.Add("@AccessorySold", CType(e.Item.Cells(3).Controls(0),TextBox).Text)
e.NewValues.Add("@AccessoryDesc", CType(e.Item.Cells(4).Controls(0),TextBox).Text)
e.NewValues.Add("@AccessoryImage", CType(e.Item.Cells(5).Controls(0),TextBox).Text)
End Sub
For some reason, I get an error message like this:
Server Error in '/' Application.
Disallowed
implicit conversion from data type nvarchar to data type smallmoney,
table 'cardb.dbo.accessories', column 'AccessoryPrice'. Use the CONVERT
function to run this query.
Description: An
unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the
error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException:
Disallowed implicit conversion from data type nvarchar to data type
smallmoney, table 'cardb.dbo.accessories', column 'AccessoryPrice'. Use
the CONVERT function to run this query.
Source Error:
An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of
the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException: Disallowed implicit conversion from data type nvarchar to data type smallmoney, table 'cardb.dbo.accessories', column 'AccessoryPrice'. Use the CONVERT function to run this query.] System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream) +723 System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +194 Microsoft.Saturn.Framework.Web.UI.SqlDataSourceControl.PerformSqlCommand(SqlCommand command) +82 Microsoft.Saturn.Framework.Web.UI.SqlDataSourceControl.Update(String listName, IDictionary selectionFilters, IDictionary newValues) +114 Microsoft.Saturn.Framework.Web.UI.MxDataGrid.OnUpdateCommand(MxDataGridUpdateEventArgs e) +869 Microsoft.Saturn.Framework.Web.UI.MxDataGrid.OnBubbleEvent(Object source, EventArgs e) +546 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +26 Microsoft.Saturn.Framework.Web.UI.MxDataGridItem.OnBubbleEvent(Object source, EventArgs e) +86 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +26 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +95 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +115 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +18 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain() +1277
My main question is, how can I convert my column 'AccessoryPrice' to smallmoney?
I have been trying to get rid of this error by trying to change the
field type within my database with no success, I keep on getting the
same error either way.
I would be very greatful if anybody can help me.
View 2 Replies
View Related
Nov 6, 2007
I have a report that accessed a Visual FoxPro 6.0 database via ODBC. Since I upgraded to Visual FoxPro 9.0, now I am getting the error:
Query Server Error
DMS-E-RBI_TABLE The table or view <table name> was not found in the dictionary
I've verified that the right path is setup and I've tried installing about every driver and none of them are working. I created a new database in 9.0 and the I can access it fine. Also, there are old tables that are accessible in the same path, just not the ones I need. Any ideas would be helpful..
View 1 Replies
View Related
Sep 29, 2014
I have setup database mail account with the gmail smtp. But I m getting error (i.e. mail server failure) while sending or receiving database mails.
View 5 Replies
View Related
Aug 27, 2015
I am attempting to Insert multiple rows in a table by passing DataTable to a Stored Proc. My code is the same as the examples on the net, however when I execute the code I receive the Subquery returned more than 1 value error.
I first created up a User-Defined Table Type
My stored proc is as follows:
ALTER PROCEDURE [KCC].[Insert_MaterialJobMtl]
@MtlTblMaterialType READONLY
AS
BEGIN
Set NOCOUNT ON;
[code]....
View 9 Replies
View Related
Jul 3, 2007
I keep receiving an update notification for KB 932557 and when I try to apply the fix, it fails. Checking update history tells me error code 0x2c24 is the reason for failure.
I cannot find any help on this error code anywhere.
Any help most appreciated.
View 16 Replies
View Related
Jan 24, 2007
Hi,
I am using SQL Server 2005,
while trying to retrieve data from the database; I am getting the following
error:
A transport-level error has occurred when receiving results
from the server. (Provider: TCP Provider, error: 0 - The handle is invalid.)
But I am getting this error randomly.
Can some one help me out?
Waiting for your response
Sudhakar
View 7 Replies
View Related
Mar 8, 2007
Hi,
Basically the error that I am getting is in our test automation when running as non-admin on the box (regular user). We use .Net C# SQLConnection class to connect to SQL express 2005 impersonating with admin credentials. After getting the connection we try to execute a select command and it some time fails with following error:
A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The handle is invalid.) at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error) at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadPacket(Int32 bytesExpected) at System.Data.SqlClient.TdsParserStateObject.ReadBuffer() at System.Data.SqlClient.TdsParserStateObject.ReadByte() at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader()
This happen only in the non-admin scenario mentioned above. Any idea what is triggering this?
Thanks in advance for all replies.
View 3 Replies
View Related
Sep 26, 2007
I have some VB.NET code to retrieve data from an SQL Server database and display it. The code is as follows: -------------------------------------------------------------------------------------------------------
sw_calendar = calendarAdapter.GetEventByID(cid)
If sw_calendar.Rows.Count > 0 Then
lblStartDateText.Text = sw_calendar(0).eventStartDate
lblEndDateText.Text = sw_calendar(0).eventEndDate
lblTitleText.Text = sw_calendar(0).title
lblLocationText.Text = sw_calendar(0).location
lblDescriptionText.Text = sw_calendar(0).description
Else
lblStartDateText.Text = "*** Not Found ***"
lblEndDateText.Text = "*** Not Found ***"
lblTitleText.Text = "*** Not Found ***"
lblLocationText.Text = "*** Not Found ***"
lblDescriptionText.Text = "*** Not Found ***"
End If
-------------------------------------------------------------------------------------------------------
If all of the fields in the database has values, everything works ok. However, if the title, location or description fields have a null value, I receive the following error message:
Unable to cast object of type 'System.DBNull' to type 'System.String'.
I've tried a bunch of different things such as:
Adding ".ToString" to the database field,
Seeing if the value is null: If sw_calendar(0).description = system.DBnull.value...
...but either I get syntax errors in the code, or if the syntax is ok, I still get the above error message.
Can anyone help me with the code required to trap the null within the code example I've provided? I'm sure there are other, and better, ways to code this, but for now I'd really like to get it working as is, and then optimize the code once the application is working (...can you tell I have a tight deadline )
Thanks,
Brad
View 6 Replies
View Related
Apr 2, 2008
I have tried several times to install Reporting Services 2000. I get 75% done and then receive the following:
Setup Error
An error has occured during setup. An error has occured while performing the following setup action. Please select help for more information about this error. You may be able to skip this action by selecting ignore, or retry the action by selecting retry. Selecting cancel will end the installation of SQL Server.
Configuring Microsoft SQL Server
Error Code: 1603
I have followed the resolution and continue to receive the above error. The server is running Windows 2003 standard edition, IIS 6 is installed and working, MDAC 2.8x installed, MS SQL 2000 and service pack 4 installed and working.The domain controller is SBS 2003 SR2.
Any help or direction would be appreciated
View 2 Replies
View Related
May 14, 2008
The following query works fine in query analyzer, but when I add it to my stored procedure I receive an error 156. How do I work around this?
select distinct(dateposted)
from billingprocedures bp1,
billingprocedureordercomponentvalues bpocv,
ordercomponentvalues ocv
where bp1.billingid = @billingid
and bp1.procedureid = bpocv.billingprocedureid
and bpocv.ordercomponentvalueid = ocv.ordercomponentvalueid
Thanks,
Bryan
View 12 Replies
View Related
Apr 10, 2008
I have tried several times to install Reporting Services 2000. I get 75% done and then receive the following:
Setup Error
An error has occured during setup. An error has occured while performing the following setup action. Please select help for more information about this error. You may be able to skip this action by selecting ignore, or retry the action by selecting retry. Selecting cancel will end the installation of SQL Server.
Configuring Microsoft SQL Server
Error Code: 1603
I have followed the resolution and continue to receive the above error. The server is running Windows 2003 standard edition, IIS 6 is installed and working, MDAC 2.8x installed, MS SQL 2000 and service pack 4 installed and working.The domain controller is SBS 2003 SR2.
Any help or direction would be appreciated
View 5 Replies
View Related
Nov 27, 2006
Hi all,
I
am trying to run a stored procedure which retreives 3 lakhs of records
and updates the data and moves few of those records to some tables.
Since the number of records are more , the time taken for the storede
procedure is around 30 minutes when i directly execute it in query
analyzer.
But I need to execute it from Visula Studio.Net 2005
(c#). Whole of the application contains only one form with a single
button.When I click on the button , this stored procure has to be
executed. But I am getting an error as shown below.
"A
transport-level error has occurred when receiving results from the
server. (provider: TCP Provider, error: 0 - The specified network name
is no longer available.)"
Database used is SqlServer 2000
How to solve this error?. Any ideas are really appreciated.
Thanks and Regards,
Sukanya.
View 4 Replies
View Related
Feb 6, 2008
I downloaded this program, and when trying to intall I am receiving an error meesage that there is insufficient disk space to install.
I have 98GB available on C and 107 GB available on D. I am on an IBM Intellistation dual processor 3,08 Ghz with 4GB RAM and 240 GB Disk (those are "G"'s), so I have tons of capacity. This has to be a problem with the .msi - any suggestions?
View 6 Replies
View Related
May 13, 2008
Using the following code we are having a problem connecting a clients WIndows Mobile device to the SDF under IIS. We have success elsewhere. Does anyone have any clues ?
Cheers Al
Dim repl As New SqlCeReplication()
Try
repl.InternetUrl = InternetUrl
repl.Publisher = Repl_Publisher
repl.PublisherDatabase = Repl_PublisherDatabase
repl.PublisherSecurityMode = SecurityType.DBAuthentication
repl.Publication = Repl_Publication
repl.Subscriber = Repl_Subscriber
repl.SubscriberConnectionString = Repl_SubscriberConnectionString
repl.DistributorLogin = Handhelds_User
repl.DistributorPassword = Handhelds_Password
repl.AddSubscription(AddOption.ExistingDatabase)
repl.Synchronize()
MsgBox("Synched!")
Catch err As SqlCeException
MessageBox.Show(err.ToString, "Error")
Finally
Cursor.Current = System.Windows.Forms.Cursors.WaitCursor
End Try
View 3 Replies
View Related
Aug 17, 2007
Any idea of what this means?
My acknowledgement messages are getting stuck in sys.transmission_queue. In profiler, the message generated by the target server (the one sending the ack) is:
This message could not be delivered because it is a duplicate.
The result of the function GET_TRANSMISSION_STATUS is
An error occurred while receiving data: '121(The semaphore timeout period has expired.)'.
Each time I send a new mesage I get one record in sys.conversation_endpoints and two in sys.transmission_queue. The two records in the transmission_queue are the same except one has a NULL for the message body and is_end_of_dialog=1
If I try to clean out the queues they re-populate (I guess becasue the initiator keeps re-trying the message?)
I have double checked my routes back to the initiator and they seem correct (see below). In fact, a second server is using an identical route and it is working OK.
The only thing tricky on this machine is added a second message queue for a differnet kind of message, and it is replying to a different service broker instance. In other words, on server A, database "Production" sends a message to server B, database "Destination" and Server A, database "Schedule" also sends a message to server B, database "Destination".
In the respective return routes I have double checked the guid for the broker_instance.
The broker_instance value in each return route is right out of server A's sys.databses view:
name service_broker_guid
-------------------------------------------------------------------------------------------------
Production 3BE812A8-5212-45D2-8664-521F83689585
Schedule 86113D85-A594-4EAB-8460-3E459EE8F055
The return routes look like this:
CREATE ROUTE [SendReplyProduction] AUTHORIZATION [mssqlssb]
WITH SERVICE_NAME = N'//mycompany.com/SSB/Services/ProductionChangeService' ,
BROKER_INSTANCE = N'3BE812A8-5212-45D2-8664-521F83689585' ,
ADDRESS = N'TCP://Server_A:4022'
The above route should send the reply to the "Production" database on Server A
CREATE ROUTE [SendReplySchedule] AUTHORIZATION [mssqlssb]
WITH SERVICE_NAME = N'//mycompany.com/SSB/Services/ScheduleChangeService' ,
BROKER_INSTANCE = N'86113D85-A594-4EAB-8460-3E459EE8F055' ,
ADDRESS = N'TCP://Server_A:4022'
The above route should send the reply to the "Schedule" database on Server A
Is this the correct way to do it? And can anyone tell me why I get the semaphore error?
For what it is worth, I am using Transport security only with windows authentication (both machines on the same domain and no certificates)
Thanks for any help!
John
View 1 Replies
View Related
Jan 3, 2006
What does this error mean? I get this in the transmission_status column of sys.transmission_queue
An error occurred while receiving data: '10053(An established connection was aborted by the software in your host machine.)'.
Also, does the number in this message correspond to error 10053 in sys.messages?
Thanks
View 3 Replies
View Related