Hi,
I have a field called "Starting DateTime" and I want to convert into my local time. I can convert it in the report with the expression "=System.TimeZone.CurrentTimeZone.ToLocalTime(Fields!Starting_DateTime.Value)", but that is too late. I want to convert it in the Select statement of the query.
Can anyone help me please?
Thx
I have this SELECT statement.
SELECT [issueID], [name] FROM [MyIssue]
What I wanted to do is in addition to the above statement, I want to add two run time fields like this:
99 [issueID],'All Issues' [name]
So let's say the above select statements generates this list:
Summer 2007 Issue
Winter 2007 Issue
The two addition fields will make the result list like this:
01 Summer 2007 Issue
02 Winter 2007 Issue
99 All Issues
How do I accomplish this? Any help is much appreciated.
Hello friends , I have table (MoneyTrans) with following structure
[Id] [bigint] NOT NULL,
[TransDate] [smalldatetime] NOT NULL,
[TransName] [varchar](30) NOT NULL, -- CAN have values 'Deposit' / 'WithDraw'
[Amount] [money] NOT NULL
I need to write a query to generate following output
Trans Date, total deposits, total withdrawls, closing balance
i.e. Trans Date, sum(amount) for TransName='Deposit' and Date=TransDate , sum(amount) for TransName=Withdraw and Date=TransDate , Closing balance (Sum of deposit - sum of withdraw for date < = TransDate )
I am working on this for past two days with out getting a right solution. Any help is appreciated
Sara
I am struggling getting a time field from as/400 into SQL 200 using SSIS. The time field for some reason is being seen as dt_I8, And every type of conversion I try to do with it, it gives me an error about truncation. Example of my time field 12.35.00
How do you convert time field from as/400 which sql is seeing as DT_I8 to a string so that I can combine it with a date field to put it into a database timestamp field.
Stacy
I have a datetime field for e.g 2015-09-15 00:00:00.000 and an integer field for e.g.100809.
The integer field is actually a time value as in hours,minutes,seconds. For e.g. the value
100809 means
10-hours
08-minutes
09-seconds
I need to combine the datetime and the int field to get the output as below
2015-09-15 10:08:09
I need to convert Local date time field to GMT. [Does we need to consider daylight saving and so on?]
[URL]
Hi guys,
I have the query below (running okay):
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
FROM myTables
WHERE Conditions are true
ORDER BY Field01
The results are just as I need:
Field01 Field02
------------- ----------------------
192473 8461760
192474 22810
Because other reasons. I need to modify that query to:
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
INTO AuxiliaryTable
FROM myTables
WHERE Conditions are true
ORDER BY Field01
SELECT DISTINCT [Field02] FROM AuxTable
The the results are:
Field02
----------------------
22810
8461760
And what I need is (without showing any other field):
Field02
----------------------
8461760
22810
Is there any good suggestion?
Thanks in advance for any help,
Aldo.
The data I have has a 1 in for each Yes answer and a 2 for each no answer. I just want the select statement to show the word yes when there's a 1 and the word no when there's a 2. I don't need to update or change the database. Could anyone lead me in the right direction here? Thanks
View 4 Replies View RelatedHello!
I am trying to write an update t-SQL statement from the following select statement:
SELECT EduNextContacts.ssn
FROM EduNextContacts Left JOIN
EduContactsAuditChanges ON EduNextContacts.ssn = EduContactsAuditChanges.ssn AND
EduNextContacts.campaign_code = EduContactsAuditChanges.campaign_code
GROUP BY EduNextContacts.ssn
HAVING(SUM(CASE EduContactsAuditChanges.release_code WHEN '103' THEN 1 ELSE 0 END) +
SUM(CASE EduContactsAuditChanges.release_code WHEN '102' THEN 1 ELSE 0 END) >= 2)
I tried many versions of writing my update statement with no luck. My most recent version is as follows:
UPDATE EduNextContacts
SET EduNextContacts.overLMLimit = 'Y'
FROM EduNextContacts Left JOIN
EduContactsAuditChanges ON EduNextContacts.ssn = EduContactsAuditChanges.ssn AND
EduNextContacts.campaign_code = EduContactsAuditChanges.campaign_code
WHERE EduNextContacts.ssn = (SELECT DISTINCT EduContactsAuditChanges.ssn
FROM EduNextContacts Left JOIN
EduContactsAuditChanges ON EduNextContacts.ssn = EduContactsAuditChanges.ssn AND
EduNextContacts.campaign_code = EduContactsAuditChanges.campaign_code
GROUP BY EduContactsAuditChanges.ssn
HAVING(SUM(CASE EduContactsAuditChanges.release_code WHEN '103' THEN 1 ELSE 0 END) +
SUM(CASE EduContactsAuditChanges.release_code WHEN '102' THEN 1 ELSE 0 END) >= 2))
And gives the following error:
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
Can anyone help shed some light on how to make an update statement from my SELECT query above?
Thanks in advance,
Harry
I need to convert a date like 08/1/2009 to 0809
I also need to show currency as 100.00 and not 100.0000
How can I do these in a select statement?
SELECT CONVERT(Varchar(20),ExpirationDate,10) AS ExpirationDate, Amount FROM tblPayment
I appreciate any help!
hello !
for MS SQL 2000
how can I get something like
SELECT name from users WHERE Count(name) > 1
i want to return only the rows where name appears more than 1 time
thank you
Hello... im having a problem with my query optimization....
I have a query that looks like this:
SELECT * FROM table1
WHERE location_id IN (SELECT location_id from location_table WHERE account_id = 998)
it produces my desired data but it takes 3 minutes to run the query... is there any way to make this faster?... thank you so much...
Ok, I inherited this database and there is a field that stopres a selectstatement. Is there anyway possible to execute the value of the fieldwithin a select statement?For example:the table:Name "george"lookupForName "Select orders from Ordertable"So maybe something like select name, execute(lookupforname) as ordersSorry, I didn't design this, just inherited :)george
View 1 Replies View Related
I am building a file repository page. For data source I use SQLDataSource and Repeater to display the categories. I am trying to achieve the result of displaying the following data: List of all "Main Categories" and all "Sub Categories" under each main category name. Also, "Total Number of files" and "Category Description" under each "Main Category".
Sample:
Human Resources
All documents related to new hire process.
New Hire Request forms, New Hire forms, Termination Forms
Total Files: 25
Programs & Utilities
Windows utilities and other tools to keep you safe on the net.
Antivirus, Spyware Removal Tools, Other programs
Total Files: 37
My SQL2005 DB has 2 tables.
1) FileCategories. Fields(CategoryID, ParentCategoryID, CategoryName, CategoryDescription)
2) Files. (CategoryID, ParentCAtegoryID, FileTitle)
My "Main Categories" are the ones that has a NULL in ParentCategoryID field. Because they are the Parents.
My each "Sub Category" has it's own ID as well as parentCategoryID. This insures that each Sub Category corresponding to it's parent only.
Sample:
Human Resources. CategoryID=4, ParentCategoryID=NULL
New Hire Request forms. CategoryID=13, Parent CategoryID=4
New Hire Forms. CategoryID=17, Parent CategoryID=4
Termination Forms. CategoryID=22, Parent CategoryID=4
Programs & Utilities. CategoryID=6, ParentCategoryID=NULL
Antivirus. CategoryID=8, Parent CategoryID=6
SpyWare Removal Tools. CategoryID=26, Parent CategoryID=6
Other Programs. CategoryID=31, Parent CategoryID=6
When I am creating a sql Select statement first I need to choose All "CategoryIDs" where "Parent category" is NULL. Then All "CategoryIDs" where "Parent categories" are not NULL and corresponding to Main Categories.
Is it something accomplishable with SQLdataSource or I have to use ObjectDataSource or something else.
I'll be on the site all day today (10/29/07) and tomorrow (10/30/07) checking for replies. Thanks in advance and let me know if you have any questions.
Hi,
I am querying DB2 from SSRS. I get an interger back that represents a time like this: HHMMSS
(The data type in DB2 is an integer.) I would like to make this representation of the time display a little more friendly. Does anyone have a good idea on how I can change the query or SSRS format to display semi-colons to break up the hours, minutes and seconds? Also, the other issue is that since I don't get leading zeros back....they probably need to be added to this value if the value is not a full 6 characters.
Hello,
Is it possible to generate a identityfield dynamically upon select, like this:
SELECT tempID AS identity(1,1), username FROM table1 ORDER BY username ASC
I want the output to be:
1 - Name12 - Name23 - Name3
The reason for this, is that i want to change the sort order in many diffrent ways, but i need to get the IDs from 1-?? even when the sort order changes.
Like:
SELECT tempID AS identity(1,1), username FROM table1 ORDER BY username DESC
I want the output to be:
1 - Name32 - Name23 - Name1
Patrick
Hi
I have tabelA, Which has 10 columns, I need to select 10 column values only no field names. Is there any way I can select only table values not field names. I don't want to see field name in my query result set. Please let me know. I appreciate your help.
Thanks
Regards
-Leong
Hi, I have created a login page (webform1) that enables me to enter my user number and password and if correct it re-directs to webform 2 where all data related to the usernumber that was entered in the login page, appears. Now I want to be able to set different re-direct pages dependant upon different users as some may require more privileges then others. As for my query I have 2 types of users: staff and managers. I want to set the login page so that if staff logins in it goes webform 3 and if manager logins in it goes webform 4. My table in the Sql database is called Users & the fields are: unumber(pk), pwd, userRole, forename, surname. I have been advised to use CASE statements, yet I do not know how to use them. Below have left my code of a simple login without the userRole validation. Please help! Sub cmdLogin_ServerClick If ValidateUser(txtUserNumber.Value, txtUserPass.Value) Then Dim tkt As FormsAuthenticationTicket Dim cookiestr As String Dim ck As HttpCookie tkt = New FormsAuthenticationTicket(1, txtUserNumber.Value, DateTime.Now(), _ DateTime.Now.AddMinutes(30), chkPersistCookie.Checked, "your custom data") cookiestr = FormsAuthentication.Encrypt(tkt) ck = New HttpCookie(FormsAuthentication.FormsCookieName(), cookiestr) If (chkPersistCookie.Checked) Then ck.Expires = tkt.Expiration ck.Path = FormsAuthentication.FormsCookiePath() Response.Cookies.Add(ck) Dim strRedirect As String strRedirect = Request("ReturnURL") If strRedirect <> "" Then Response.Redirect(strRedirect, True) Else strRedirect = "webform1.aspx" Response.Redirect(strRedirect, True) End If Else Response.Redirect("webform3.aspx", True) End If End Sub
View 1 Replies View Relatedhow i convert varchar sal field to numeric in query
select sum(sal) from emp1
error:the sum or average aggregate operation cannot take a varchar data type as an argument.
Hi there.
I'm trying to extract data from my SQL server & everything in the script I've got is working (extracting correct data) except for one field - which is for the most part it's off by +2 days (on a few occasions - I see it off by just +1 day or even +3, but it's usually the +2 days).
I'm told that it's due to the conversion formula - but - since SQL is not my native language, I'm at a bit of a loss.
The DB table has the date field stored as a type: CHAR (as opposed to 'DATE')
Can anyone out there help?
Please advise. Thanks.
Best.
K7
Hello,
i am pretty new to asp. I am trying to do a select statement for sending an email to everyone who is not an admin. the code is below, i know it must be fairly simple, yet i do not know how to do it. With the code below, I select everyone. I want to know how to do it properly, similar to the second which does not work.
Dim cmd As New OleDbCommand("SELECT Username, Pass, Gender, FirstName, LastName, Email, NickName FROM tblUsers", conn)
DOES NOT WORK:
Dim cmd As New OleDbCommand("SELECT Username, Pass, Gender, FirstName, LastName, Email, NickName FROM tblUsers WHERE Admin = 'N'", conn)
Thanks in advance.
I've got a encrypted column in sql which holds the password field, e.g. TPSK9RlOz0/2BhuQntVeaBda+9g=, is their a way in a select statement to get the password ?
View 3 Replies View RelatedI have a query that displays a bunch of fields, specifically a createdon field and closedate field.I need to find the diff in days between date1 and date2 and only disiplay those results.For example: where the NumDays = a certain value. For example, 81.I have the NumDays displaying in the query, but I don't know how to reference these values in the where clause.
SELECT
TBU.businessunitidnameAS 'BU Name',
LEADS.statecodenameAS 'Status',
LEADS.statuscodeAS 'Status Code',
LEADS.accountidnameAS 'Account Name',
[code]...
I do a SELECT * from table command in an ASP page to build a text fileout on our server, but the export is not to allow a field name rows ofrecords. The first thing I get is a row with all the field names. Whydo these come in if they are not part of the table records? How do Ieliminate this from being produced? Here's the ASP code....<html><head><title>Package Tracking Results - Client Feed</title></head><body><%' define variablesdim oConn ' ADO Connectiondim oRSc ' ADO Recordset - Courier tabledim cSQLstr ' SQL string - Courier tabledim oRSn ' ADO Recordset - NAN tabledim nSQLstr ' SQL string - NAN tabledim objFSO ' FSO Connectiondim objTextFile ' Text File' set and define FSO connection and text file object locationSet objFSO = CreateObject("Scripting.FileSystemObject")'Set objTextFile =objFSO.CreateTextFile(Server.MapPath("textfile.txt"))'Response.Write (Server.MapPath("textfile.txt") & "<br />")Set objTextFile = objFSO.OpenTextFile("C: extfile.txt",2)' write text to text file'objTextFile.WriteLine "This text is in the file ""textfile.txt""!"' SQL strings for Courier and NAN tablescSQLstr = "SELECT * FROM Courier"' set and open ADO connection & oRSc recordsetsset oConn=Server.CreateObject("ADODB.connection")oConn.Open "DRIVER={Microsoft Access Driver (*.mdb)};DBQ=" &"c:/Database/QaTracking/QaTracking.mdb" & ";"set oRSc=Server.CreateObject("ADODB.Recordset")oRSc.Open cSQLstr, oConnResponse.ContentType = "text/plain"Dim i, j, tmpIf Not oRSc.EOF ThenFor i = 1 To oRSc.Fields.CountobjTextFile.Write oRSc.Fields(i-1).NameIf i < oRSc.Fields.Count ThenobjTextFile.Write " "End IfNextobjTextFile.WriteLineWhile Not oRSc.EOFFor i = 1 To oRSc.Fields.CountIf oRSc.Fields(i-1) <"" Thentmp = oRSc.Fields(i-1)' If TypeName(tmp) = "String" Then' objTextFile.Write "" &_'Replace(oRSc.Fields(i-1),vbCrLf,"") & ""' ElseobjTextFile.Write oRSc.Fields(i-1)' End IfEnd IfIf i < oRSc.Fields.Count ThenobjTextFile.Write " "End IfNextobjTextFile.WriteLineoRSc.MoveNextWendEnd IfobjTextFile.CloseSet objTextFile = NothingSet objFSO = NothingoRSc.CloseSet oRSc = NothingoConn.CloseSet oConn = Nothing%></body></html>
View 1 Replies View Related
Hi all,
I have created a report in SSRS 2005 which is being viewed by users from different Time Zones.
I have a dataset which has a field of type datetime (UTC). Now I would like to display this Date according to the User Time Zone.
For example if the date is August 07, 2007 10:00 AM UTC,
then I would like to display it as August 07, 2007 03:30 PM IST if the user Time Zone is IST.
Similarly for other Time Zones it should display the time accordingly.
Is this possible in SSRS 2005?
Any pointers will be usefull...
Thanks in advance
sudheer racha.
I have passed createdDate from UI to Stored procedure.createdDate field declared with DateTime.it is having value 2014-07-01.I need to fetch records from the database based upon the created field.but Create_TM in database having value Date with timestamp.so how would i change the createdfield in stored procedure.
ALTER PROCEDURE [dbo].[ByDateRange]
@Feed VARCHAR(50),
@CreatedDate DATETIME
select * from Date_table where Create_TM = @CreatedDate
Hi,I have an orders database and I need to be able to write a querythat groups sales by:1. Date2. Time of day (both am and pm)I currently have a date/time field named "Submitted" that storesjust the date.However, how do I store the time?I know I can store the date/time in the "Submitted" field Icreated. However, because of the time being stored in that field, Ican't execute an easy query such as:select * from database where submitted = '2/10/05'(reason being, the time portion makes each "Submitted" fieldrecord unique, so just the date won't be recognized)I realize there probably is a much better way to do this in theSQL query language that I am not aware of.Two questions:1. Based on what I'm trying to do -- query based on date and groupby number of sales for each hour of the day (am and pm) -- what is thebest approach to store the time?2. What does the query look like that querys by date and groupsorders by time of day (am and pm)?Thanks for your help.J
View 1 Replies View RelatedHey gang,
I've got a query and I'm really not sure how to get what I need. I've got a unix datasource that I've setup a linked server for on my SQL database so I'm using Select * From OpenQuery(DataSource, 'Query')
I am able to select all of the records from the first two tables that I need. The problem I'm having is the last step. I need a field in the select statement that is going to be a simple yes or no based off of if a customer number is present in a different table. The table that I need to look into can have up to 99 instances of the customer number. It's a "Note" table that stores a string, the customer number and the sequence number of the note. Obviously I don't want to do a straight join and query because I don't want to get 99 duplicates records in the query I'm already pulling.
Here's my current Query this works fine:
Select *From OpenQuery(UnixData, 'Select CPAREC.CustomerNo, CPBASC_All.CustorCompName, CPAREC.DateAdded, CPAREC.Terms, CPAREC.CreditLimit, CPAREC.PowerNum
From CPAREC Inner Join CPBASC_All on CPAREC.CustomerNo = CPBASC_All.CustomerNo
Where DateAdded >= #12/01/07# and DateAdded <= #12/31/07#')
What I need to add is one more column to the results of this query that will let me know if the Customer number is found in a "Notes" table. This table has 3 fields CustomerNo, SequenceNo, Note.
I don't want to join and select on customer number as the customer number maybe repeated as much as 99 times in the Notes table. I just need to know if a single instance of the customer number was found in that table so I can set a column in my select statement as NotesExist (Yes or No)
Any advice would be greatly appreciated.
I have a date/time field with a sql format of "datetime" The actualdate/time data format is MM/DD/YYYY^hh:mm:ss:pm or "1/25/200712:00:16 AM" Both the date and time are combined on the same fieldwith a space seperating the two.I need to run a query on this date/time field using the criteria oftoday's date so if I want to search all records with todays date, Ineed to query on this field. I don't need the time, but just today'sdate (MM/DD/YYYY) portion of the field.Thanks,Brian
View 7 Replies View RelatedIn Code Behind, What is proper select statement syntax to retrieve the @BName field from a table?Using Visual Studio 2003SQL Server DB
I created the following parameter:Dim strName As String Dim parameterBName As SqlParameter = New SqlParameter("@BName", SqlDbType.VarChar, 50) parameterBName.Value = strName myCommand.Parameters.Add(parameterBName)
I tried the following but get error:Dim strSql As String = "select @BName from Borrower where BName= DOROTHY V FOWLER "
error is:Line 1: Incorrect syntax near 'V'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Line 1: Incorrect syntax near 'V'.
Source Error:
Line 59: Line 60: Line 61: myCommand.ExecuteNonQuery() 'Execute the query
Consider the following data:
create table #test
(id int
,color varchar(20)
)
insert into #test
(id, color)
values
(1, 'blue'),(2, 'red'),(3,'green'),(4,'red,green')
if I wanted to run a query to select any records that had red in the color field, how would I do that? Not the one with only red, but a query that would give me both record number 2 and record number 4.
I want to convert xml data with select query and insert into table.
Xml sample like this :
<ROOT>
<ROW>
<NAME>JHON</NAME>
<ADDRESS>
<ADDRESS1>
<CITY>LKO</CITY>
<STATE>UP</STATE>
[code]....
And data should be like this with select query :
NAME ADDRESS1CITY ADDRESS1STATE ADDRESS2CITY ADDRESS2STATE
JHON LKO UP DLI DELHI
YASH AAA HYR NULL NULL
I want simple query in form of above format.
I have a table of zip codes, some with Canadian zips. I'd like to takea zip code and search for nearby zips. For example:Dim theZip As Integer = textbox1.text....Parameter.Add(@ziplow, SqlDbType.Int, 5).Value = (theZip - 10)....Parameter.Add(@ziphigh, SqlDbType.Int, 5).Value = (theZip + 10)SELECT * from ZIPCODES where Cast(zip_code as Integer) BETWEEN @lowzipAND @highzipProblem is the letters in the Canadian records cannot be cast asintegers for this process. I get this error:Syntax error converting the varchar value '53151 1' to a column of datatype int.Is there a SQL query that can exclude if no cast can be made to anInteger?Thanks!Anton
View 5 Replies View Related