Hi,
why does converting integer to float take so long? Its a column with about 5 Million rows.
I want to avoid cast(inumber1 as float) / cast(inmuber2 as float), thats why converting them. Queries should be a bit faster after that.. hope so :)
Thanks a lot
I can't take full credit for this. I want to share this with Jeff Moden who did the important research for this calculation here.
All I did was just adapting some old code according to the mantissa finding Jeff made and optimized it a little
Some test codeDECLARE@SomeNumber FLOAT,
@BinFloat BINARY(8)
SELECT@SomeNumber = -185.6125,
@BinFloat = CAST(@SomeNumber AS BINARY(8))
SELECT@SomeNumber AS [Original],
CAST(@SomeNumber AS BINARY(8)) AS [Binary],
dbo.fnBinaryFloat2Float(CAST(@SomeNumber AS BINARY(8))) AS [Converted],
@SomeNumber - dbo.fnBinaryFloat2Float(CAST(@SomeNumber AS BINARY(8))) AS [Error]
And here is the code for the function.CREATE FUNCTION dbo.fnBinaryFloat2Float
(
@BinaryFloat BINARY(8)
)
RETURNS FLOAT
AS
BEGIN
DECLARE@Part TINYINT,
@PartValue TINYINT,
@Mask TINYINT,
@Mantissa FLOAT,
@Exponent SMALLINT,
@Bit TINYINT,
@Ln2 FLOAT,
@BigValue BIGINT
SELECT@Part = 1,
@Mantissa = 1,
@Bit = 1,
@Ln2 = LOG(2),
@BigValue = CAST(@BinaryFloat AS BIGINT),
@Exponent = (@BigValue & 0x7ff0000000000000) / EXP(52 * @Ln2)
WHILE @Part <= 8
BEGIN
SELECT@Part = @Part + 1,
@PartValue = CAST(SUBSTRING(@BinaryFloat, @Part, 1) AS TINYINT),
@Mask =CASE WHEN @Part = 2 THEN 8 ELSE 128 END
WHILE @Mask > 0
BEGIN
IF @PartValue & @Mask > 0
SET @Mantissa = @Mantissa + EXP(-@Bit * @Ln2)
SELECT@Bit = @Bit + 1,
@Mask = @Mask / 2
END
END
RETURNSIGN(@BigValue) * @Mantissa * POWER(CAST(2 AS FLOAT), @Exponent - 1023)
END
Thanks again Jeff!
Peter Larsson
Helsingborg, Sweden
hi, how can I convert a float to a char so I can do:
'£' + convert(char,amount) AS [money]
When I do the above the number is like 1.07848e+006
rather than 1078480
thans for any help.
jamie
I have a sp that receive a rango of float values,and I need to convert this values to a varchar(20).
I am trying the next but I got a strange result.
@intNoTarjIni = 121456790
set @strTarjeta=cast(@intNoTarjIni as varchar(20))
returns: 1.21457e+008
set @strTarjeta=convert( varchar(20),@intNoTarjIni)
returns:1.21457e+008
How can I convert sucessfully a float to varchar?
Hi -
My field TDMergerVotePercent is defined as a float field. I want it to return 'NA' when the value is -1 but I'm getting the error message
'Error converting data type varchar to float' in my aspx page. Is there where the CAST function can be used? Thanks
CASE
WHEN TDMergerVotePercent = -1 THEN 'NA'
WHEN TDMergerVotePercent IS NULL THEN ''
ELSE TDMergerVotePercent
END AS TDMergerVotePercent
I have a data type float with a value of 10000487930 that I'm trying to insert into a data type nvarchar and am getting the result of '1.00005e+010'. I've tried cast(field as nvarchar) however this is not working. What might fix this? I cannot change the insert table data type.
View 3 Replies View RelatedHello,I would like to convert a field from ntext field found in one databasetable to float field found in another database table. The reason why Iwant to do this is a long one.I have tried the following and playing around with the following:declare @valuePointer varbinary(16)<Row cursor logic to initialize @valuePointer to be a pointer to thesource ntext field>update TargetFloatTable set TargetFloatTable.TargetFloatValue =CAST(CAST(@valuePointer AS nvarchar) AS float)where TargetFloatTable.Id = @Idbut is not working for me.Hoping someone out there can help.Thanks,Cally
View 5 Replies View RelatedSelect Cast('100.1234' as float)give me the result 100.1234Now when I convert it back to char I want exactly 100.1234Select Convert(char(100),Cast('100.1234' as float))Gives me 100.123 (Here I was expecting 100.1234)When I doSelect STR(Cast('100.1234' as float),25,4)I get back the result as 100.1234However here I am not sure how many digits do I have after the decimalpoint. If I put some value likeSelect STR(Cast('100.1234' as float),25,8)I get 0's appended to it, which is again not desired.Thanks in advance,Jai
View 4 Replies View RelatedIs this possible? I'm trying to user a lookup task and the data I want to compare is a varchar to float. How can I do this? I tried using the data conversion task and it didn't work and also tried cast and convert. Is this even possible or is there a way around it?
thanks,
I've three columns:
Length Width Height
1.5 2.5 10
2 3.7 19
in Query I want to display Like 1.5 X 2.5 X 10 (Length, Width, Height).....
???
I'm running the following statement...
The column is currently float (8). Need to convert to numeric. I've tried cast, convert. no go for either.
Any help on this would be greatly appreciated.
..... select ... convert(numeric(38,0), colname)
TIA,
Jeremy
Hello,
Is there a way to convert varchar or char to float?
Thank you
I have a field in my database that is stored as varchar. The values are usually contain a decimal, and should have really been a float or decimal. In order for me to do analytics in my BI environment, I need to convert this to a float or decimal.
eg of values.
10.00
20.00
0.00
15.00
or could be missing when I use cast(value as float) or cast(value as decimal(9,2)) or convert(float, value) I get an error
Msg 8114, Level 16, State 5, Line 2
Error converting data type varchar to numeric.
Hi,
Can you guys help me out?
I m trying to sum up some varchar-typed field. I need to convert it to float before doing the summing up so I m using "Cast".
I do get the answer but its not the correct figure. My SQL statement is as follow:
SELECT Sum((Cast(Qty1 as float)) + (Cast(Qty2 as float))) as intAnswer FROM TableName
Please help.
What actually happens when I convert date to float? Select convert(float,getdate(),112)
View 1 Replies View RelatedI have the following CASE statement:
SELECT CASE WHEN [TBL_whole_rock_geochem].au = 0 THEN '<' + [TBL_ActLab_codes].[Au] ELSE [TBL_whole_rock_geochem].[Au] END AS [Au det]
It errors on the highlighted code.
Error converting data type nvarchar to float
the code should return :
<0.5
<1
I have tried '<' + ISNUMERIC([TBL_ActLab_codes].[Au]) but received this error
Conversion failed when converting the varchar value '<' to data type int.
How I can concatenate the < with a float value?
Hi,
how to convert nvarchar datatype to float?
Regards
Prashant
Hello I have some problems with converting varbinary to float in T-SQLstored procedure. In my C# application i have table of structures withdouble type fields. Size of this table is variant. I have to send thistable to SP. Because of performance i want to send it only once andwhole. So I have to cut this varbinary blob in my Stored procedure toreceive structure field values. But I have problems with double fields- conversion from varbinary to float in T-SQL is not allowed. Pleasehalp me - thx for any advise.Maciej
View 1 Replies View RelatedI have a column type of float and How to convert it show like this
default value =39260.80 MY db use this ',' seperator instead of '.'
wanna convert 39,260
This code is working if using '.' seperator
SELECT parsename(convert(varchar,CAST(floor('39260.80') AS MONEY),1),2)
not work using ',' seperator
SELECT parsename(convert(varchar,CAST(floor('39260,80') AS MONEY),1),2)
I'm trying to move records from a SQL table with a float column to a DB2 database that has the column defined as Decimal (8,2) It keeps crashing saying it has a type mismatch problem. I tried changing my source command to pass in the column already converted and it still crashes on this. I also tried doing a data conversion task to do the conversion and I still get the same error. Any ideas?
View 3 Replies View RelatedI seem to always get the "Fun Stuff" to try and figure out. I have an entire table that was pumped out of Oracle. I even hate saying that word!
There are a couple columns that are Float data type, and they are storing phone numbers as a Float data type. I am not able to CAST these into anything that is legible.
This is one of the values that I made up that look like some of the others.
9.72732e+009
how to convert float to timestamp in single select query..for exp. i have float as 1.251152515236 ,i want to convert this to datetime and from datetime to timestamp... i.e. 26:11:00
View 6 Replies View RelatedHi there, I've a question regaarding datatype conversions... I can't convert the above mentioned datatype. I always get an error message that the conversion fails. Doesn't matter If convert or cast is used.
How would you convert the above mentioned variable into float???
I have been given some data from a Mainframe (AS400?) which has some fields coded in Packed Decimal. I have been able to load the data into a SQL2005 database table, but I now need to convert the Packed Decimal data in the binary(6) field to the appropriate integer (or float) value.
The field contains values such as the following:-
0x20202020200C
0x202020022025
0x20202020DFFA
I don't know how to interpret these. Has anyone got a function that can do this for me?
I've read several articles online that explain how packed decimal works, but none tell me how to interpret the last of my three examples. Can you help?
Thanks!
How to convert float to timestamp in single select query
E.g., i have float as 1.251152515236 ,
I want to convert this to datetime and from datetime to timestamp... i.e. 26:11:00
Hi,
I receive blanks for a column called value and i need to represent it as a blank or NA into a colum whose datatype is float in the datawarehouse.
how is this possible because in current schenario a blank is being converted to 0
which is not the right thing.
i would like to retain the blank in conversion from char to float ,
please explain me if it can be done or how to overcome this issue.
Thanks
Dear Experts,Ok, I hate to ask such a seemingly dumb question, but I'vealready spent far too much time on this. More that Iwould care to admit.In Sql server, how do I simply change a character into a number??????In Oracle, it is:select to_number(20.55)from dualTO_NUMBER(20.55)----------------20.55And we are on with our lives.In sql server, using the Northwinds database:SELECTr.regionid,STR(r.regionid,7,2) as a_string,CONVERT(numeric, STR(r.regionid,7,2)) as a_number,cast ( STR(r.regionid) as int ) as cast_to_numberFROM REGION R1 1.00112 2.00223 3.00334 4.0044SELECTr.regionid,STR(r.regionid,7,2) as a_string,CONVERT(numeric, STR(r.regionid,7,2) ) as a_number,cast (STR(r.regionid,7,2) as numeric ) as cast_to_numberFROM REGION R1 1.00112 2.00223 3.00334 4.0044Str converts from number to string in one motion.Isn't there a simple function in Sql Server to convertfrom string to number?What is the secret?Thanks
View 4 Replies View RelatedDoes it make a difference if I use the Float or Int data type for a field such as ReceiptNumber or CheckNumber?
Thanks for any thoughts,
Hi!
I'm quite new to SQL Server. I need to set a float datatype to display something like 3.55. However, all values that are stored in the float column are truncated to 4 or some other single digit. How can this be prevented?
Regards,
Sam
Hello everyone,
I am sure this is a newbie question as I am new to Microsoft SQL server but any help is greatly appreciated. I am populating a SQL database from an AS400. The decimal numbers from the AS400 are coming accross with extra decimals. (ie. 63.02 is coming accross as 63.0200001)
Is there a way to limit the number of decimals in a float or real field - or a SQL command I can put in a script to truncate each field to 2 decimal places after they are populated.
Thanks,
Randy
We are having problems with rounding errors on large monetary calculations in sql server 6.5
The calculations include float fields (for volumes and unit of measure conversions in product movements). I was wondering if the float being "approximate" could be the problem.
IF it is, why would I want to store things as a float instead of a dec(28,14)?
Is it faster to compute numbers stored as approximate binaries? Will we see a big performance hit if we switch some of the table`s field`s to decimals?
Thanks in advance.
I have some engineering data in my table and the db designer is representing it with a float datatype. Here's what is happening. If I query on a record based on id num and get a row and put it in text boxes in my Windows App, min_riv_hd_dia (the float) is 0.026<14 zeroes>2. If I try to query and get that same record again but this time based on id num and min_riv_hd_dia equal to 0.026<14 zeroes>2, I get no row found. If I just do a select on this row based on id number, sql server displays it as 0.026. But if I query with 0.026 as my value, still the row is not found. If I query min_riv_hd_dia > 0.026, the record is found.
So my question is, how can I tell the exact value that must be input in my search criteria in order to find this row?
Thank you so much if you can help!
Hi there
I have two Databases
in both databases are fields with float - no null
If I am transfering data from one database to the other everything works well unless there is a comma in the field ( 0,99 or 123,456 )
"SQLAString = "Insert into InventurDaten (Artikelnummer,Hauptartikelnummer,Auspraegung,Arti kelbezeichnung,Artikeltext1,EDVEingang ,EDVAusgang,InventurmengeEDV) values ('" & ArtNr & "','" & ArtNrT & "','" & AP & "','" & ArtBez & "','" & ArtText & "'," & EDVEingang & "," & EDVAusgang & "," & ArtMenge & ")"
"
where EDVEingang and EDVAusgang are defined as float, no null
Then the programm stops with the following message:
Within the INSERT-Procedure there are less columns then there are Contents in the Value-Clause.
I have to finish the programm until tomorrow morning and don't know what the problem is.
If anybody has an idea, please let me know.
regards
Reiner