I am pulling data from one table to another, a column in table 1 is "allow function" the corresponding column in table 2 is "block function". So when the value in table 1 is "0" it needs to be "1" in table 2 and when it is "1" in table 1 it needs to be "0" in table 2.
This select/insert is being done in a stored proc and I am at a loss on how to efficiently handle this conversion.
Any suggestions?
Thanks
Is there a method to convert "Select * From Table" to "Select field1,field2,...fieldn From Table" ?
Thanks
select convert(varchar(16), getdate(), 101)+LEFT(REPLACE(convert(varchar, getdate(), 108), ':', ''),4)
From above query I get
mmddyyyyhhmm
but it' s yyyy and hour can not be separated
04/12/200702:05
How can I separated the year and hour ?
Thanks
Daniel
In answering this question you could just tell me what you think would work rather than trying to test it.
The following query works correctly and returns rows with pairs of values repid and repid2. I need loop through a large table and update *its* repid2 with rm_repid2 for any rows where its repid value equals rm_repid but only for the pairs that result in the below query
SELECT
rm.repid AS rm_repid
,rm.repid2 AS rm_repid2
,rm.id2contact
,r.repid AS r_repid
,r.prim AS r_prim
FROM sfrep r JOIN sfrepmst rm ON r.repid=rm.repid2
WHERE rm.repid IN
(
'TEST01'
,'TEST02'
)
Returns
rm_repid rm_repid2 id2contact r_repid
-------- --------- ---------------------------------------- -------
TEST01 NEW01 John Smith NEW01
TEST02 NEW02 Ken Roberts NEW02
TIA
Doug
The data I have has a 1 in for each Yes answer and a 2 for each no answer. I just want the select statement to show the word yes when there's a 1 and the word no when there's a 2. I don't need to update or change the database. Could anyone lead me in the right direction here? Thanks
View 4 Replies View RelatedI am trying to assign @sql variable to @total, where @sql is a sqlstatement stored on the database, however what I am getting is itsstring value and not its calcuation. Could anybody help?DECLARE my_cursor CURSOR FORSELECT sqlstatement from Sn_SalesReportdeclare @sql varchar(255), @total varchar(20)OPEN my_cursorFETCH NEXT FROM my_cursor INTO @sql-- Check @@FETCH_STATUS to see if there are any more rows to fetch.WHILE @@FETCH_STATUS = 0BEGINSET @total = (@sql)print @total-- This is executed as long as the previous fetch succeeds.FETCH NEXT FROM my_cursorINTO @sqlENDCLOSE my_cursorDEALLOCATE my_cursorI tried this SET @total = EXEC (@sql), but no successRod
View 9 Replies View RelatedHello!
I am trying to write an update t-SQL statement from the following select statement:
SELECT EduNextContacts.ssn
FROM EduNextContacts Left JOIN
EduContactsAuditChanges ON EduNextContacts.ssn = EduContactsAuditChanges.ssn AND
EduNextContacts.campaign_code = EduContactsAuditChanges.campaign_code
GROUP BY EduNextContacts.ssn
HAVING(SUM(CASE EduContactsAuditChanges.release_code WHEN '103' THEN 1 ELSE 0 END) +
SUM(CASE EduContactsAuditChanges.release_code WHEN '102' THEN 1 ELSE 0 END) >= 2)
I tried many versions of writing my update statement with no luck. My most recent version is as follows:
UPDATE EduNextContacts
SET EduNextContacts.overLMLimit = 'Y'
FROM EduNextContacts Left JOIN
EduContactsAuditChanges ON EduNextContacts.ssn = EduContactsAuditChanges.ssn AND
EduNextContacts.campaign_code = EduContactsAuditChanges.campaign_code
WHERE EduNextContacts.ssn = (SELECT DISTINCT EduContactsAuditChanges.ssn
FROM EduNextContacts Left JOIN
EduContactsAuditChanges ON EduNextContacts.ssn = EduContactsAuditChanges.ssn AND
EduNextContacts.campaign_code = EduContactsAuditChanges.campaign_code
GROUP BY EduContactsAuditChanges.ssn
HAVING(SUM(CASE EduContactsAuditChanges.release_code WHEN '103' THEN 1 ELSE 0 END) +
SUM(CASE EduContactsAuditChanges.release_code WHEN '102' THEN 1 ELSE 0 END) >= 2))
And gives the following error:
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
Can anyone help shed some light on how to make an update statement from my SELECT query above?
Thanks in advance,
Harry
I have the following code:
INSERT INTO Reports_PI_Recent
SELECT TOP(13)* FROM Reports_PI
ORDER BY RecordKey desc
problem is that the data I am trying to insert is of the type nvarchar. eg: 06.50
I need it to be converted to type decimal (or float) before it is inserted in the new table.
Is there a way to do this within the SELECT TOP expression?
I have the following code:
INSERT INTO Reports_PI_Recent
SELECT TOP(13)* FROM Reports_PI
ORDER BY RecordKey desc
problem is that the data I am trying to insert is of the type nvarchar. eg: '06.50'
I need it to be converted to type decimal (or float) before it is inserted in the new table.
Is there a way to do this within the SELECT TOP expression?
I need to convert a date like 08/1/2009 to 0809
I also need to show currency as 100.00 and not 100.0000
How can I do these in a select statement?
SELECT CONVERT(Varchar(20),ExpirationDate,10) AS ExpirationDate, Amount FROM tblPayment
I appreciate any help!
how to convert float to timestamp in single select query..for exp. i have float as 1.251152515236 ,i want to convert this to datetime and from datetime to timestamp... i.e. 26:11:00
View 6 Replies View RelatedHi all
With this query
select convert(varchar(16), getdate(), 101)+' '+LEFT(convert(varchar, getdate(), 108),5)
I get
mmddyyyy hh:mm
How can I change my query to get
mmddyyyy hh:mm but no 0 when month from 1 to 9
example can not be: 02/12/2007 03:34
but should be: 2/12/2007 03:34
Don't know why excel not accept month with 0 from 1 to 9
Thks
Daniel
I have a table that holds full names but it's lastname, firstname.I need to select and convert to firstname lastname and remove the comma.
View 7 Replies View RelatedConsider the below script
CREATE TABLE #TEMP(Id int,CreatedBy varchar(30),ModfiedBy varchar(30))
CREATE TABLE #TEMP2 (ID int,SearchedBy varchar(30))
INSERT INTO #TEMP VALUES(1,'James',NULL)
INSERT INTO #TEMP VALUES(1,'James','George')
INSERT INTO #TEMP VALUES(1,'James','Vikas')
INSERT INTO #TEMP2(ID) VALUES(1)
INSERT INTO #TEMP2(ID) VALUES(1)
INSERT INTO #TEMP2(ID) VALUES(1)
Now i want to get the result as
;WITH CTE AS(
SELECT ROW_NUMBER() OVER(PARTITION BY Id ORDER BY ID ASC) AS RowNum ,*
FROM #TEMP
)
SELECT CASE WHEN RowNum=1 THEN CREATEDBY
WHEN RowNum > 1 THEN ModfiedBy
END
FROM CTE
But when i convert this select to update, i am missing something...
My update is
;WITH CTE AS(
SELECT ROW_NUMBER() OVER(PARTITION BY Id ORDER BY ID ASC) AS RowNum ,*
FROM #TEMP
)
UPDATE #TEMP2
SET SearchedBy =CASEWHEN RowNum=1 THEN CREATEDBY
WHEN RowNum > 1 THEN ModfiedBy
END
FROM CTE
WHERE #TEMP2.ID=CTE.ID
Only the first record gets updated...
I want to convert xml data with select query and insert into table.
Xml sample like this :
<ROOT>
<ROW>
<NAME>JHON</NAME>
<ADDRESS>
<ADDRESS1>
<CITY>LKO</CITY>
<STATE>UP</STATE>
[code]....
And data should be like this with select query :
NAME ADDRESS1CITY ADDRESS1STATE ADDRESS2CITY ADDRESS2STATE
JHON LKO UP DLI DELHI
YASH AAA HYR NULL NULL
I want simple query in form of above format.
I have a table of zip codes, some with Canadian zips. I'd like to takea zip code and search for nearby zips. For example:Dim theZip As Integer = textbox1.text....Parameter.Add(@ziplow, SqlDbType.Int, 5).Value = (theZip - 10)....Parameter.Add(@ziphigh, SqlDbType.Int, 5).Value = (theZip + 10)SELECT * from ZIPCODES where Cast(zip_code as Integer) BETWEEN @lowzipAND @highzipProblem is the letters in the Canadian records cannot be cast asintegers for this process. I get this error:Syntax error converting the varchar value '53151 1' to a column of datatype int.Is there a SQL query that can exclude if no cast can be made to anInteger?Thanks!Anton
View 5 Replies View Related
With this clause "select convert(varchar(16), getdate(), 101)" I can get mmddyyyy but
How can I get time such as mmddyyyyhhmm
Thanks
Daniel
Hi,
I have a field called "Starting DateTime" and I want to convert into my local time. I can convert it in the report with the expression "=System.TimeZone.CurrentTimeZone.ToLocalTime(Fields!Starting_DateTime.Value)", but that is too late. I want to convert it in the Select statement of the query.
Can anyone help me please?
Thx
How to convert float to timestamp in single select query
E.g., i have float as 1.251152515236 ,
I want to convert this to datetime and from datetime to timestamp... i.e. 26:11:00
Dear Experts,Ok, I hate to ask such a seemingly dumb question, but I'vealready spent far too much time on this. More that Iwould care to admit.In Sql server, how do I simply change a character into a number??????In Oracle, it is:select to_number(20.55)from dualTO_NUMBER(20.55)----------------20.55And we are on with our lives.In sql server, using the Northwinds database:SELECTr.regionid,STR(r.regionid,7,2) as a_string,CONVERT(numeric, STR(r.regionid,7,2)) as a_number,cast ( STR(r.regionid) as int ) as cast_to_numberFROM REGION R1 1.00112 2.00223 3.00334 4.0044SELECTr.regionid,STR(r.regionid,7,2) as a_string,CONVERT(numeric, STR(r.regionid,7,2) ) as a_number,cast (STR(r.regionid,7,2) as numeric ) as cast_to_numberFROM REGION R1 1.00112 2.00223 3.00334 4.0044Str converts from number to string in one motion.Isn't there a simple function in Sql Server to convertfrom string to number?What is the secret?Thanks
View 4 Replies View RelatedHello all,
I have two mult-value parameters in my report. Both of them working with selecting one or more values. But, when I test using "(Select All)" values for both parameters , only one parameter works. The "available values" for these two parameters are both from the data set.
select distinct ProductType
from Product
order by ProductType
Any suggestion? thx
I am unable to the access on table even after providing the SELECT permission on table.
Used Query by me :
Here Test is schema ; Card is table ; User is Satish
To grant select on Table
GRANT SELECT ON TEST.Card TO satish
Even after this it is not working, So provided select on schema also.
used query : GRANT SELECT ON SCHEMA::TEST TO Satish.
Hi all,
I copied and executed the following sql code in my SQL Server Management Studio Express (SSMSE):
--SELECTeg8.sql from SELECT-Using correlated subqueries of MSDN2 SELECT Examples--
USE AdventureWorks ;
GO
SELECT DISTINCT Name
FROM Production.Product p
WHERE EXISTS
(SELECT *
FROM Production.ProductModel pm
WHERE p.ProductModelID = pm.ProductModelID
AND pm.Name = 'Long-sleeve logo jersey') ;
GO
-- OR
USE AdventureWorks ;
GO
SELECT DISTINCT Name
FROM Production.Product
WHERE ProductModelID IN
(SELECT ProductModelID
FROM Production.ProductModel
WHERE Name = 'Long-sleeve logo jersey') ;
GO
=========================================
I got:
Results Messages
Name o row affected
========================================
I think I did not get a complete output from this job. Please help and advise whether I should search somewhere in the SSMSE for the complete results or I should correct some code statements in my SELECTeg8.sql for obtaining the complete results.
Thanks in advance,
Scott Chang
I have a report that uses different datasets based on the year selected by a user.
I have a year_id parameter that sets a report variable named dataset_chosen. I have varified that these are working correctly together.
I have attempted populating table cell data to display from the chosen dataset. As yet to no avail.
How could I display data from the dataset a user selects via the year_id options?
Dear All
I need to cerate a SP that SELECTS all the records from a table WHERE the first letter of each records starts with 'A' or 'B' or 'C' and so on. The letter is passed via a parameter from a aspx web page, I was wondering that someone can help me in the what TSQL to use I am not looking for a solution just a poin in the right direction. Can you help.
Thanks Ross
I have a problem where my users complain that a select statement takes too long, at 90 seconds, to read 120 records out of a database.
The select statement reads from 9 tables three of which contain 1000000 records, the others contain between 100 and 250000 records.
I have checked that each column in the joins are indexed - they are (but some of them are clustered indexes, not unclustered).
I have run the SQL Profiler trace from the run of the query through the "Database Engine Tuning Advisor". That just suggested two statistics items which I added (no benefit) and two indexes for tables that are not involved at all in the query (I didn't add these).
I also ran the query through the Query window in SSMS with "Include Actual Execution Plan" enabled. This showed that all the execution time was being taken up by searches of the clustered indexes.
I have tried running the select with just three tables involved, and it completes fast. I added a fourth and it took 7 seconds. However there was no WHERE clause for the fourth table, so I got a cartesian product which might have explained the problem.
So my question is: Is it normal for such a type of read query to take 90 seconds to complete?
Is there anything I could do to speed it up.
Any other thoughts?
Thanks
Hi All
I am using SQL Server 2005 with SP2. I have multi select parameter in the report. In SP2 reporting services gives Select All option in the drop down.
Is there any way I can remove that option from the list?
Thanks
Hey guys i have a stock table and a stock type table and what i would like to do is say for every different piece of stock find out how many are available The two tables are like thisstockIDconsumableIDstockAvailableconsumableIDconsumableName So i want to,Select every consumableName in my table and then group all the stock by the consumable ID with some form of total where stockavailable = 1I should then end up with a table like thisEpson T001 - Available 6Epson T002 - Available 0Epson T003 - Available 4If anyone can help me i would be very appreciative. If you want excact table names etc then i can put that here but for now i thought i would ask how you would do it and then give it a go myself.ThanksMatt
View 2 Replies View RelatedWhen I run simple select against my view in Query Analyzer, I get result set in one sort order. The sort order differs, when I BCP the same view. Using third technique i.e. Select Into, I have observed the sort order is again different in the resulting table. My question is what is the difference in mechanisim of query analyzer, bcp, and select into.
Thanks
Hi,
im getting from my first select a list of pairs of codes (let say the codes r of products.)
so i have something like:
FirstCode SecondCode
1 1
2 5
4 2
... ...
now i want to get the name of each product so it whould be like:
FirstCode,FirstName,SecondCode,SeconeNam
the names stored in other table.
how can i do it?
thanks
Dovalle
Far below (in section "original 3 steps"), you see the following:1. a temp table is created2. some data is inserted into this table3. some of the inserted data is removed based on a join with the sametable that the original select was made fromIn my opinion, there is no way that the join could produce more rowsthan were originally retrieved from viewD. Hence, we could get rid ofthe DELETE step by simply changing the query to be:INSERT INTO #details ( rec_id, orig_corr, bene_corr )SELECT rec_id, 0, 0FROM viewDWHERE SOURCE_SYS NOT IN ( 'G', 'K' )AND MONTH( VALUE_DATE_A8 ) = MONTH( @date )AND YEAR( VALUE_DATE_A8 ) = YEAR( @date )AND INMESS NOT LIKE '2__' ---- the added line===== original 3 steps (mentioned above) =====CREATE TABLE #details (rec_id UNIQUEIDENTIFIER PRIMARY KEY NOT NULL,orig VARCHAR(35) NULL,bene VARCHAR(35) NULL,orig_corr TINYINT NULL,bene_corr TINYINT NULL)INSERT INTO #details ( rec_id, orig_corr, bene_corr )SELECT rec_id, 0, 0FROM viewDWHERE SOURCE_SYS NOT IN ( 'G', 'K' )AND MONTH( VALUE_DATE_A8 ) = MONTH( @date )AND YEAR( VALUE_DATE_A8 ) = YEAR( @date )DELETE dFROM #details dJOIN viewD v ON ( d.rec_id = v.rec_id )WHERE INMESS LIKE '2__'
View 1 Replies View RelatedThe select command below will output one patient’s information in 1 row:
Patient id
Last name
First name
Address 1
OP Coverage Plan 1
OP Policy # 1
OP Coverage Plan 2
[code]...
This works great if there is at least one OP coverage. There are 3 tables in which to get information which are the patient table, the coverage table, and the coverage history table. The coverage table links to the patient table via pat_id and it tells me the patient's coverage plan and in which priority to bill. The coverage history table links to the patient and coverage table via patient id and coverage plan and it gives me the effective date.
select src.pat_id, lname, fname, addr1,
max(case when rn = 1 then src.coverage_plan_ end) as OP_Coverage1,
max(case when rn = 1 then src.policy_id end) as OP_Policy1,
code]...
There are several parameters on a report. One of the parameter is a multi-select enabled parameter and I suppressed the value "All" showing as one of the item in the drop down list, simply by filter out the [bha].[bha].CURRENTMEMBER.LEVEL.ORDINAL to 1, as "(Select All)" is pre-assigned to the drop list when multi-select is enabled and it is confusing to show "(Select All)" and "All" in the drop list. However I have another report which is linked to this report and the value which is required to pass to this report for this parameter is "All". Can I pass the "Select All" as a parameter from the other report? If so, how? Thanks.
View 1 Replies View Related