Converting Read Only Data From SQL 6.5 To SQL 7
Aug 11, 2000I am using SQL 6.5 and we are going to upgrade to SQL 7. Has anyone
had any experience converting "read only" data? If so, I am looking
for tips and tricks. thanks in advance.
ADVERTISEMENT
Pipeline Error-excel Source-data Reader Does Not Read In Meta Data
Apr 16, 2008Hi all, i got this error:
[DTS.Pipeline] Error: "component "Excel Source" (1)" failed validation and returned validation status "VS_NEEDSNEWMETADATA".
and also this:
[Excel Source [1]] Warning: The external metadata column collection is out of synchronization with the data source columns. The column "Fiscal Week" needs to be updated in the external metadata column collection. The column "Fiscal Year" needs to be updated in the external metadata column collection. The column "1st level" needs to be added to the external metadata column collection. The column "2nd level" needs to be added to the external metadata column collection. The column "3rd level" needs to be added to the external metadata column collection. The "external metadata column "1st Level" (16745)" needs to be removed from the external metadata column collection. The "external metadata column "3rd Level" (16609)" needs to be removed from the external metadata column collection. The "external metadata column "2nd Level" (16272)" needs to be removed from the external metadata column collection.
I tried going data flow->excel connection->advanced editor for excel source-> input and output properties and tried to refresh the columns affected.
It seems that somehow the 3 columns are not read in from the source file?
ans alslo fiscal year, fiscal week is not set up up properly in my data destination?
anyone faced such errors before?
Thanks
XML Data Source .. Expression? Variable? Connection? Error: Unable To Read The XML Data.
Feb 23, 2008RE: XML Data source .. Expression? Variable? Connection? Error: unable to read the XML data.
I want my XML Data source to be an expression as i will be looping through a directory of xml files.
I don't see the expression property or the connection property??
I tried setting the XMLData property to @[User::filename], but that results in:
Information: 0x40043006 at Load XML Files, DTS.Pipeline: Prepare for Execute phase is beginning.
Error: 0xC02090D0 at Load XML Files, XML Source [108]: The component "XML Source" (108) was unable to read the XML data.
Error: 0xC0047019 at Load XML Files, DTS.Pipeline: component "XML Source" (108) failed the prepare phase and returned error code 0xC02090D0.
Information: 0x4004300B at Load XML Files, DTS.Pipeline: "component "OLE DB Destination" (341)" wrote 0 rows.
Task failed: Load XML Files
Information: 0xC002F30E at Bad, File System Task: File or directory "d:jcpxmlLoadjcp2.xml.bad" was deleted.
Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
The program '[3312] Package.dtsx: DTS' has exited with code 0 (0x0).
Thanks for any help or information.
Report Builder - Read Data From SQL Server With Ntext Data Type
Apr 16, 2008Hi all,
I have a column in SQL server which is of type ntext. Selecting the specific column to view it in report builder, an error message appears with the following description:
- Cannot run this report. The grouping expression 'nameofcolumn' returns the datatype binary. The Grouping Expression cannot return binary data.
Report Builder recognises this as if it was an image...
Thanks in advance!
Reporting Services :: How To Read Data (email) From Report In Data Driven SSRS Subscriptions
Jul 28, 2015get the data from report to create data driven SSRS Subscriptions,
write query :
Running Report:
SQL Security :: Making Data Change In Read Only Database Without Letting Other Users Update Data
Aug 6, 2015I want to make data changes in read_only database , that's why i must set database read_write. While database is at read_write mode, i want to be sure that no one makes change in database.
For this aim, i write the code below, but i suspect that after setting the database read_write, till the setting database
single_user ,is it possible get DML script from another user. Is the code below enough for this operation. Or is there another way?
Reminding: Read_only database can not be set single_user mode. That's why, first you must set database read_write.
The code;
use master
alter database xxx set read_write
with rollback immediate
alter database xxx set single_user
with rollback immediate
use xxx
update tablexxx set columnxxx=yyy
use master
alter database xxx set read_only
with rollback immediate
alter database xxx set multi_user
with rollback immediate
How Can I Read Data From XML-file With Exported Data From MS Access.
Oct 29, 2007
How can I read data from XML-file with exported data from MS Access? Which a dataflow component do I have to use?
Thanks in advance.
Data Access :: Arithmetic Overflow Error Converting Expression To Data Type Int
Jul 24, 2015When I execute the below stored procedure I get the error that "Arithmetic overflow error converting expression to data type int".
USE [FileSharing]
GO
/****** Object: StoredProcedure [dbo].[xlaAFSsp_reports] Script Date: 24.07.2015 17:04:10 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
[Code] .....
Msg 8115, Level 16, State 2, Procedure xlaAFSsp_reports, Line 25
Arithmetic overflow error converting expression to data type int.
The statement has been terminated.
(1 row(s) affected)
System.Data.SqlClient.SqlException: Error Converting Data Type Numeric To Decimal.
Aug 31, 2004Hi There,
I'm using C# to get a value for a DOUBLE precision variable, called "Length", from a textBox using the following line:
Length = Convert.ToDouble( txtLength.Text )
I'm also using the following lines to prepare my stored procedure call:
arParms[9] = new SqlParameter("@Length", SqlDbType.Decimal, 5);
arParms[9].Value = record.Length;
My stored procedure has the following parameter definition:
@Length decimal(9,3)
My problem is that if someone types a value bigger than 999999 in the textbox he will get for sure the following error:
System.Data.SqlClient.SqlException: Error converting data type numeric to decimal.
I don't know how to either make sql or C# to truncate the value or catch the exception to automatically assign 0 to the parameter.
Please Help.
Moshe
System.Data.SqlClient.SqlException: Syntax Error Converting The Varchar Value 'V' To A Column Of Data Type Int
Aug 31, 2006I am using a stored procedure which returns a value of charecter datatype 'V' to the calling program.I am getting an sql exception System.Data.SqlClient.SqlException: Syntax error converting the varchar value 'V' to a column of data type inti didnot define any int datatype in my tablethis is my codeSqlCommand com = new SqlCommand("StoredProcedure4", connection);com.CommandType = CommandType.StoredProcedure; SqlParameter p1 = com.Parameters.Add("@uname", SqlDbType.NVarChar);SqlParameter p2 = com.Parameters.Add("@opwd", SqlDbType.NVarChar);SqlParameter p3 = com.Parameters.Add("@role", SqlDbType.NVarChar);p3.Direction = ParameterDirection.ReturnValue;p1.Value = username.Text.Trim();p2.Value = password.Text.Trim();com.ExecuteReader();lblerror2.Text = (string)(com.Parameters["@role"].Value); can your figure out what is the error ? Is it a coding error or error of the databse
View 3 Replies View RelatedData Flow: Converting Data In Multiple Columns
Sep 28, 2006Hi,
I'm just wondering what's the best approach in Data Flow to convert the following input file format:
Date, Code1, Value1, Code2, Value2
1-Jan-2006, abc1, 20.00, xyz3, 35.00
2-Jan-2006, abc1, 30.00, xyz5, 6.30
into the following output format (to be loaded into a SQL DB):
Date, Code, Value
1-Jan-2006, abc1, 20.00
1-Jan-2006, xyz3, 35.00
2-Jan-2006, abc1, 30.00
2-Jan-2006, xyz5, 6.30
I'm quite new to SSIS, so, I would appreciate detailed steps if possible. Thanks.
Converting Text Data To Ntext Data
Mar 27, 2006Hi all,
My organization have a web-based application and needs it to support multilingual so we will be adapting our app to use unicode. However, one of our problems is to convert existing data from text to ntext. I couldn't find anything that document this. What is the best way to do that? I would like to be able to migrate the data from an existing text column to another ntext column in the table.
I brief you about my system, I used List manager system to store the messages and distribute to all members. Right now,by design the Lyris system keep the message in the text field which mean it 's not support multilanguage directly because of unicode field. We needs to create new Db which has the data structure as same as Lyris but just one difference is keep the message in unicode format (ntext) which we need the sql script to automatically update the new record get from Lyris to new DB.
If I can't do that, what are the options? If it's possible, I would like to be able to do this in sql script.
Thanks a mil, in advance.
Eddie
Read Data From Log
Jul 21, 2006hi all
how i can read all the querys that send to the server
exmple
insert , update statement need all this statement at the end of the day how can i do that by sqlserver
thanks alot
How To Read From Sql Data Set
Sep 13, 2007Code Snippet
Dim ds As New DataSet
Dim adp As New SqlDataAdapter("Select MaxID,ValueName from tblSettings where ID=1", cn)
adp.Fill(ds)
If IsDBNull(ds.Tables(0).Columns("MaxID")) Then
GetMaxID = 1
Else
GetMaxID = ds.Tables(0).Columns("MaxID")
End If
the ds.Tables(0).Columns("MaxID") showing a value like this. ( Please tell how to read from sql data set)
{System.Data.DataColumn}
AllowDBNull: True
AutoIncrement: False
AutoIncrementSeed: 0
AutoIncrementStep: 1
Caption: "MAxid"
ColumnMapping: Element {1}
ColumnName: "MAxid"
Container: Nothing
DataType: {Name = "Decimal" FullName = "System.Decimal"}
DateTimeMode: UnspecifiedLocal {3}
DefaultValue: {System.DBNull}
DesignMode: False
Expression: ""
ExtendedProperties: Count = 0
MaxLength: -1
Namespace: ""
Ordinal: 0
Prefix: ""
ReadOnly: False
Site: Nothing
Table: {System.Data.DataTable}
Unique: False
XML Data Read Help
Sep 12, 2007I am having issues in figuring out how to read part of an XML file and I'm not sure if it can be done. Any and all help would be appreciated.
I have a file resembled this way:
<btb-root xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" btb-num-trans="2"
btb-date="2006-11-09" btb-time="22:40:03" btb-sender="TTT"
btb-receipient="Test">
<btb-request req-method="Asynchronous">
<req-header>
<req-btb-id>Test</req-btb-id>
<req-client-id>Test</req-client-id>
<req-product>Test</req-product>
<req-loan-number>Test</req-loan-number>
</req-header>
<req-property-address>
<addr1>Test DR</addr1>
<city>Test</city>
<state>Test</state>
<zip>Test</zip>
</req-property-address>
<req-borrowers borr-type= "Borrower">
<first-name>Test</first-name>
<last-name>test</last-name>
</req-borrowers>
</btb-request>
</btb-root>
I am in need of extracting the date "2006-11-09" to a field in an import table contained in a sql database. I can pull all the other fields I need but in SSIS retrieving the date is not an option that I currently see. Does anyone know a way around this?
Thanks
Read Data From File Imp Into MS-SQL
Mar 24, 2006Hi,
Ik like to read data from a file (well formatted) into as MS-SQL database.
What is the best way to do this.
Jim
Cannot Re-read Data In Column 2
May 18, 2004Hi,
I'm connecting to my SQL Server via Java in my Notes environment, but when I try to update my Notes-documents I get an error fra SQL Server saying that it can not re-read data from column 2.
Without being absolutely certain - I'm quite sure that the code is valid.
Does anyone know what the error means ?
Thanks in advance
Kim Hansen
Is It Possible If I Want To Read The Backup Data
Jan 28, 2008hi all
right now , i am still learning how to use sql2005
is it possible if i want to read the backup data without restoring the backup database.? if it possible can you show me how to do it
cheers Arif
arifliminto86
READ UNCOMMITTED Data
Apr 23, 20071. In this topichttp://groups.google.com/group/comp...b21516252b65e7c,someone wrote: "I've implemented SET TRANSACTION ISOLATION LEVEL READUNCOMMITTED at the beginningof a number of stored procedures and, then SET TRANSACTION ISOLATIONLEVEL READCOMMITTED at the end to minimize the disruption to the application.".My question is, do you really need to set READ COMMITTED at the end ofstored procedure? What scope does that command affect?2. Could someone write some real world example where i should neverread uncommitted data... i'm having trouble understanding when ishould and when i should not use it.
View 7 Replies View RelatedHow To Share Read Only Data
Jun 15, 2007Hi,
I'm new to replication. Can anyone help with the following?
I want to publish the specific rows of data that are created on the publisher without accepting changes to those rows from subscribers, but do accept new rows (and changes to those rows) from subscribers.
EG. publisher creates rows 1 and 2 which are published to the subscriber
subscriber creates rows 3 and 4 which are merged back to the publisher
subscriber's updates (or delets) to rows 1 and 2 are not merged back to the publisher
So basically I want the publisher created rows to be published but remain as is whilst allowing subscriber created rows to be merged back to the publisher.
Hope is makes sense.
Thanks in advance,
Seedsy
Error: Cannot Read The Next Data Row For The Data Set
Jan 21, 2008Hi all,
I have noticed quite a few other posts about this error. My feeliing is that it has various causes requiring different remedies. I could not find anything suitable for my situation, so I post this in case someone can offer some tip.
The error happens during subscription report generation.
The following is from the SRS's log file:
ReportingServicesService!runningjobs!14!1/21/2008-10:35:37:: w WARN: Thread pool pressure. Using current thread for a work item.
ReportingServicesService!runningjobs!c!1/21/2008-10:36:28:: i INFO: Adding: 2 running jobs to the database
ReportingServicesService!library!c!1/21/2008-10:41:28:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams
ReportingServicesService!runningjobs!c!1/21/2008-10:48:28:: i INFO: RunningJobContext.IsExpired; found expired request
ReportingServicesService!processing!c!1/21/2008-10:48:28:: i INFO: Merge abort handler called for ID=-1. Aborting data sources ...
ReportingServicesService!runningjobs!c!1/21/2008-10:48:28:: i INFO: RunningJobContext.IsExpired; found expired request
ReportingServicesService!processing!8!1/21/2008-10:48:28:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: Report processing has been canceled by the user. , ;
Info: Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: Report processing has been canceled by the user.
ReportingServicesService!processing!8!1/21/2008-10:48:28:: w WARN: Data set 'ICParamAll': Report processing has been aborted.
ReportingServicesService!processing!19!1/21/2008-10:48:28:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: Report processing has been canceled by the user. , ;
Info: Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: Report processing has been canceled by the user.
ReportingServicesService!processing!19!1/21/2008-10:48:28:: w WARN: Data source 'eConsole': Report processing has been aborted.
ReportingServicesService!processing!19!1/21/2008-10:48:28:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: Report processing has been canceled by the user. , ;
Info: Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: Report processing has been canceled by the user.
ReportingServicesService!processing!10!1/21/2008-10:48:28:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the data set ICParamAll., ;
Info: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the data set ICParamAll. ---> System.Data.SqlClient.SqlException: Operation cancelled by user.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlDataReader.HasMoreRows()
at System.Data.SqlClient.SqlDataReader.ReadInternal(Boolean setTimeout)
at System.Data.SqlClient.SqlDataReader.Read()
at Microsoft.ReportingServices.DataExtensions.DataReaderWrapper.Read()
at Microsoft.ReportingServices.DataExtensions.MappingDataReader.GetNextRow()
--- End of inner exception stack trace ---
Any tip will be greatly appreciated.
Converting Data
Dec 7, 2006Hi I am converting data from old DB to NEW DBIn the OLD table fields like "PhoneNumber" the data enterd are [ 657 985-986, (03)-987-543, 675(89)00, ect]Is their any function in sql where I can get rid of all those spaces and () and - between the numbers as my new field is only numbers and with out spaceOtherwise I have to clean them up manually as I have 1000000 records
cheers
Converting Data
May 27, 2008hi,
can any one tell me how to convert my access data to sql server data. using sql server express edition
How To Get Read Only Control Value Through SQl Data Source
Nov 7, 2006Hello,
I am using this sql data source control.
<asp:textbox runat="server" id="txtFromDate" ReadOnly="true"></></asp:textbox>
<asp:textbox runat="server" id="txtToDate" ReadOnly="true"></asp:textbox>
--------------------------------->
<asp:sqldatasource id="dsClickInfo" runat="server" connectionstring="<%$ ConnectionStrings:activeConnectionString %>"
selectcommand="SProc_GetTransaction" selectcommandtype="StoredProcedure">
<SelectParameters>
<asp:QueryStringParameter QueryStringField="Id" Name="MerchantID" Type="int32" />
<asp:ControlParameter ControlID="txtFromDate" Name="StartDate" PropertyName="Text"
Type="String" DefaultValue="0" />
<asp:ControlParameter ControlID="txtToDate" Name="EndDate" PropertyName="Text"
Type="String" DefaultValue="0" />
</SelectParameters>
</asp:sqldatasource>
I abouve code txtFromDate and txtToDate are marked as readonly so sqldatasource is not able to get value from these controls.
How is it possible?
Please help me..
.Read() Not Able To Get Data With Special Caracter
Dec 8, 2006Hi all,
My SQL database has varchar that store names with special caracter like "René". The problem is when I try to get the data back from the database, the .Read() command from the SqlDataReader object is not working. In extra, it does not Throw any error????????
Please help me,
JR
Read Image Data From SQL Server
Sep 19, 2007Here is my task I am storing pdf's in sql server. I would like to retrieve the binary data from sql server and write the pdf content into an existing aspx page to the appropriate pageview section. What is the best way to handle this. The code works below but it loads a new browser with the content. I need it to appear in it's tabbed section in the original aspx file. Any assistance you can give me would be greatly appreciated.
Thanks Jerry
oSQLConn.Open()Dim myreader As SqlDataReader
myreader = myCommand.ExecuteReader
Response.Expires = 0
Response.Buffer = True
Response.Clear()
Do While (myreader.Read())
Response.ContentType = ("application/pdf")Response.BinaryWrite(myreader.Item("img_content"))
Loop
Data Read-Consistency During Update
Sep 27, 2007Hi folks,I have 3 tables of related data in SQL 2000/2005 that receive periodic adds/updates every 30 seconds.I have enabled transactions on all updates, is anything else needed to ensure data consistency during reads in a high # of fetches per second situation?Thanks,johnEdit:Clarification -- I just need the data to be correctly displayed to all users.
View 2 Replies View RelatedHow Can I Read From Image Data Type
May 11, 2001I want to store my MS-Word documents and Excel sheets in the database. So, i have used
the image datatype. Iam not able to download the documents from the database.
i have used getBytes() method. But when i try to download excel sheet document, i get
a error message saying, "File error: data may have been lost".
Can i get some help. can u say how can i put word and excel docs in the database and
retrieve it.
regards,
sathish
Read Only User On Data Base
Jan 29, 2004I'm sure this is a really easy one but I want to create a user with read only access on a sql 2000 database using SQL authentication.
I'm building a little pilot DB system and I have a trainee developer who I want to built me some queries for crystal reports. But I dont want them to be able to amend/delete data or tables etc.
I've created the user but how to I set it to read only. Also will the user still have read only rights if the user has access to the database via enterprize manager/Query analysier.
thanks,
Read Commited Data With Out Lock
May 20, 2008Hi All
Is there a way in SQL to query the data with out locking.
My intention is to read commited data with out locking
Thanks
Read Data From Two Files Simultaneously
Oct 17, 2007Hello,
I have 2 tables EmployeeA(Eng) and EmployeeB(Spanish) kept in seperate mdb's. I want to add the records into Sql Server 2005 table called StateEmployee.
Procedure:
1. Loop through 2 folders..one containing table EmployeeA in mdb and other containing tbl EmployeeB in diff mdb's.
2. Pick a file from EmployeeA and EmployeeB, both at the same time.
3. Count the total no of rows in both files. If equal proceed.
4. Compare the 'employeeid' of one row of employeeA to the employeeid of EmployeeB.
5. If employee id matches, load both the rows in Sql server else file it to the error table.
6. Loop through all rows simultaneously till end of row.
7. Go to next mdb.
How do i go about this step by step. I am fairly new to SSIS.
Read Binary Data From SQL Server
Oct 19, 2007hello.
i have a _CommandPtr that has the type CommandTypeEnum::adCmdTex, and the CommandText a query("Select * from Table_1") and this select returns one row that has a binary data in it.
Code Block
_CommandPtr pCommand;
//Create the C++ ADO Command Object
pCommand.CreateInstance(__uuidof(Command));
pCommand->ActiveConnection = this->pConnection;
//Make the ADO C++ command object to accept stored procedure
pCommand->CommandType = CommandTypeEnum::adCmdText;
//Tell the name of the Stored Procedure to the command object
pCommand->CommandText = _bstr_t("select * from Table_1");
//get recordset
pRecordset = pCommand->Execute(NULL,NULL,CommandTypeEnum::adCmdText);
BYTE* buffer = NULL;
if(pRecordset != NULL)
{
while (!pRecordset->GetEndOfFile())
{
VARIANT var = pRecordset->Fields->GetItem("test")->Value;
void * pData = NULL;
SafeArrayAccessData(var.parray, &pData);
long size = GetArraySize(var, NULL);
buffer = new BYTE[size];
memcpy(buffer, pData, size);
SafeArrayUnaccessData(var.parray);
pRecordset->MoveNext();
}
pRecordset->Close();
}
where:
Code Block
long GetArraySize(const VARIANT& var, long * nElems)
{
if ( !(var.vt & VT_ARRAY) ) return -1;
long size = 0;
long dims = SafeArrayGetDim(var.parray);
long elemSize = SafeArrayGetElemsize(var.parray);
long elems = 1;
for ( long i=1; i <= dims; i++ )
{
long lbound, ubound;
SafeArrayGetLBound(var.parray, i, &lbound);
SafeArrayGetUBound(var.parray, i, &ubound);
elems *= (ubound - lbound + 1);
}
if ( nElems ) *nElems = elems;
size = elems*elemSize;
return size;
}
I enter in VARIANT var = pRecordset..... and if gives me a value... but when I put it in Memory explorer in VS, i only see this data " fe ee fe ee fe ee fe ee fe ee fe ee fe ee ...fe ee" and of course it brakes at
SafeArrayGetLBound(var.parray, i, &lbound);
Can someone tell me where I am doing a very bad thing?
P.S. I was able to read the binary data from the server using C#.NET 2.0.
To Read Sql Server Data In Oracle
Jun 22, 2007I have an ORACLE server say "A". I have a SQL Server named "B". In SQL Server I have a table named "test" who contains only one field named "aa" which is "BIT" type field. I want to query this table of "B" from "A" interface through Oracle's DB Link and ODBC dsn for Sql Server. But it gives error. If I changed the data type of field "aa" to "int", then it reads easily. Please suggest.
View 7 Replies View Related