My Query is as shown below
Declare @FROMDATE DATETIME
Declare @THRUDATE DATETIME
Declare @Parm Varchar(250)
set @FROMDATE = '09/25/2013'
set @THRUDATE = '09/28/2013'
set @Parm = 'FROMDATE=' + @FROMDATE + ';THRUDATE=' + @THRUDATE
I am getting an error at above line saying that
Conversion failed when converting date and/or time from character string.
I have the following
Column Name : [Converted Date]
Data Type : varchar(50)
When I try and do month around the [Converted Date] I get the following error message
“Msg 241, Level 16, State 1, Line 2
Conversion failed when converting date and/or time from character string.”
My Query is
SELECT
month([Created Date])
FROM [FDMS_PartnerReporting].[Staging].[Salesforce_MarketingReporting]
SELECT * ,[Due]
FROM [Events]
Where Due >= getdate() +90
This returns the error: Conversion failed when converting date and/or time from character string
Why would this be? How to cast or convert this so that it will work?
This is my code and I don't know why this error keeps coming out : PS : I did cursor to execute query.Th error showed is bold:
DECLARE RegCreatedDate CURSOR FOR
SELECT DISTINCT (CONVERT(NVARCHAR,CreatedDate,103))
FROM CA_Registration WHERE Month(CreatedDate)= @paMonthIn AND YEAR(CreatedDate)=@paYearIn
OPEN RegCreatedDate
FETCH NEXT FROM RegCreatedDate INTO @RegCreatedDate
WHILE @@FETCH_STATUS = 0
[Code] ....
I'm trying to select only July from show_held but I keep on getting the error message saying:
Conversion failed when converting date and/or time from character string.
I get error message after I write this code:
ANDshow.show_held = '&July&'
As you can see from the below code, How do I select July from times_held_in_July?
SELECTevent_name,
DATENAME (MONTH, show_held) AS times_held_in_July
FROMevent,
show
WHEREevent.show_id = show.show_id
Result:
event_name times_held_in_July
DressageJuly
Jumping July
Led in July
Led in September
Led in May
DressageApril
DressageJuly
Flag and PoleJuly
SELECTevent_name,
DATENAME (MONTH, show_held) AS times_held_in_July
FROMevent,
show
WHEREevent.show_id = show.show_id
ANDshow.show_held = '&July&'
Result:
Msg 241, Level 16, State 1, Line 24
Conversion failed when converting date and/or time from character string.
BEGIN TRAN;
INSERT INTO [dbo].[QuestManualProcess]
([ProcessFromDate]
,[LastProcessedFileDateStamp]
,[ProcessedOnDate]
[code]....
Conversion failed when converting date and/or time from character string/
I am trying to write a stored procedure that loops through the list of user tables, gets the record count for each one and write a record to an audit table with DATE, TABLENAME, RECORDCOUNT.I keep getting an error "Conversion failed when converting date and/or time from character string".Here is the script...
DECLARE @table nvarchar(500)
DECLARE @sql nvarchar(520)
DECLARE CursorSelect CURSOR FOR
select table_name from INFORMATION_SCHEMA.tables where table_name not like 'sys%' order by table_name
[code]....
I've imported a CSV file into a table in SQL Server 2012. It's a large file, 140,000+ rows, so I couldn't covert it to Excel first to preserve the date format due to Excel's row limit. In the CSV file, there were 3 column with date data in "31-Aug-09" format, and the import automatically transformed these in "31AUG09" format (varchar(50)) in SQL Server. Now I need to convert these 3 columns from varchar to datetime so I could work with them in date format.
I've tried several things,e.g,
select
convert(datetime,
right(admdate,4)+left(admdate,2)+substring(admdate,3,3))
or
select
convert(datetime,
substring(admdate,6,4)+substring(admdate,1,2)+substring(admdate,3,3))
but keep getting the same error message (Msg 241) "Conversion failed when converting date and/or time from character string".
All source and target date fields are defined as data type "smalldatetime". The "select" executes without error though when used with "insert into" it fails with the error:
Msg 295, Level 16, State 3, Line 25: Conversion failed when converting character string to small date-time data type..I am converting from a character string to smalldatetime since the source and target date columns are "smalldatetime". All other columns for the source and target are nvarchar(255). I assume there is an implicit conversion that I don't understand. In a test, I validated that all dates selected evaluate ISDATE() to 1.
USE [SCIR_DataMart_FromProd_06_20_2014]
GO
IF OBJECT_ID ('[SCIR_DataMart_FromProd_06_20_2014].[dbo].[IdentifierLookup]', 'U') IS NOT NULL
DROP TABLE [SCIR_DataMart_FromProd_06_20_2014].[dbo].[IdentifierLookup]
[code]....
Hi there,
I have the following code:
Dim CityTown As String = Ctype(Request.Querystring("CityTown"), String)
Dim Suburb As String = Ctype(Request.Querystring("Suburb"), String)
Dim SuburbValue As String = Ctype(Request.Querystring("Suburb"), String)
Dim Rooms As String = Ctype(Request.Querystring("Rooms"), String)
Dim Rent As String = Ctype(Request.Querystring("Rent"), String)
Dim DateToday = DateTime.Now
Dim mySQL AS String
If suburbValue = "- All -" Then
mySQL = "SELECT propListID, propListExpires, propBuildType, propRoomNumber, propRentPerWeek, propDescription, propCityTown, propSuburb FROM tblPropertyList WHERE [propCityTown]='" & CityTown & "' AND [propRentPerWeek]<= '" & Rent & "' AND [propRoomNumber]='" & Rooms & "'AND [propListExpires] >='" & DateToday & "' "
However I am having trouble getting the Date to work as part of my SQL String. I keep getting the following error:
Syntax error converting datetime from character string.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Syntax error converting datetime from character string.
Source Error:
Line 30: MyDA = New SqlDataAdapter (mySQL, myConn)
Line 31: myDS = New DataSet()
Line 32: myDA.Fill(MyDS)
Line 33:
Line 34: dlPropertyListing.Datasource = MyDS.Tables(0)
Source File: K:detailsdetailspropertylisting.aspx Line: 32
Any ideas how to resolve this?? I do not want to use Parameters in my statement.
Thanks in advance,
TCM
Can anyone tell me what this error message means and how I can correct it on my statement:
Code:
Server: Msg 241, Level 16, State 1, Line 1Syntax error converting datetime from character string.
Here's my query statement:
Code:
SELECT animalid AS "Animal ID", name AS "Name", categoryid AS "Category ID", DATENAME(MONTH, dateBorn) + ' ' + DATENAME(DAY, dateBorn) + ', ' + DATENAME(YEAR, dateBorn) AS "Date of Birth"FROM animalWHERE categoryid = 'Cat' AND dateBorn = 'May%'
I know it has something to do with: dateBorn = 'May%' because when I took out Quote: AND dateBorn = 'May%' I get results, but I need to narrow it down to list the cats born in May.
I am trying to select all members from a SQL db who have a renewal date btw to dates inputted into two text fields, but I am now getting the error above. This is where the problem is coming in...
If strStartDate <> "" and strEndDate <> "" Then
If bParam = True Then
StrSQL = strSQL & " AND "
Else
StrSQL = strSQL & " WHERE deleted=0 AND "
End If
strSQL = strSQL & "renewal_due BETWEEN '%" & Replace(strStartDate,"'","''") & "%' AND '%" & Replace(strEndDate,"'","''") & "%' "
End If
Any help would be greatly appreciated!
Thank you...
This is probably a simple wuestion but i would appreciate some help
I am trying to get and insert the userId into a table called "Orders"
I got the user id as
Dim CustomerId As Object = Membership.GetUser(User.Identity.Name).ProviderUserKey.ToString
The button on click command is
worldshop.ShoppingCart.CreateOrder(CustomerId,.........................
The Function Has the parameter for Customer Id as follows
Dim dbParam_CustomerId As System.Data.IDataParameter = New System.Data.SqlClient.SqlParameter dbParam_CustomerId.ParameterName = "@CustomerId" dbParam_CustomerId.Value = CustomerId dbParam_CustomerId.DbType = System.Data.DbType.String command.Parameters.Add(dbParam_CustomerId)
When i run this I am getting the error message
"Conversion failed when converting from a character string to uniqueidentifier."
Can anyone tell me where I am going wrong
many thanks
Martin
Hi, i have a problem, i keep getting this Error.
I want to insert an uniqueidentifier using a textbox, i use the following code to insert.
SqlDataSource1.InsertParameters["RWID"] = new Parameter("RWID", TypeCode.String, RWID);
SqlDataSource1.Insert();
The databasetype is an uniqueidentifier of that column.
Anyone who can help me with this problem?
I am trying to store a unique identifier that is text into a field in a SQL DB that is type uniqueidentifier and I get the follow error message.
Conversion failed when converting from a character string to uniqueidentifier.
My Code is shown below:
comSQL.Parameters.AddWithValue("@PROPERTYID", Format(Request.QueryString("ID").ToString, "{0:########-####-####-####-############}"))
This has worked before but isnt' anymore. Any ideas?
Hi,
I am getting the following error when
executing the ExecuteInsert in the code below..:
Conversion failed when converting
datetime from character string.
private bool
ExecuteInsert(String quantity)
{[snip]
con.Open();
SqlCommand command = new SqlCommand();
command.Connection = con;
TextBox TextBox1 =
(TextBox)FormView1.FindControl("TextBox1");
Label 1 = (Label)FormView1.FindControl("Label3");
Label 2 = (Label)FormView1.FindControl("Label13");
command.CommandText = "INSERT INTO Transactions (etc,Date,etc)
VALUES (etc,@date,@etc)";
command.Parameters.AddWithValue([snip]);
command.Parameters.AddWithValue([snip]); command.Parameters.AddWithValue("@date",
DateTime.Now.ToString());
command.Parameters.AddWithValue([snip]);
command.Parameters.AddWithValue([snip]);
command.ExecuteNonQuery();
con.Close();
command.Dispose();
return true; } protected
void Button2_Click(object sender, EventArgs e)
{ TextBox TextBox1 =
FormView1.FindControl("TextBox1") as TextBox;
bool retVal = ExecuteUpdate(Int32.Parse(TextBox1.Text));
if (retVal)
Response.Redirect("~/URL/EXTENSION.aspx");
Insert(); } private
void Insert() {
TextBox TextBox1 = FormView1.FindControl("TextBox1") as
TextBox;
ExecuteInsert(TextBox1.Text); }} Thanks if someone can help!Jon
I am trying to write a SP in Query Analyzer before I start the code from a web form to acces it.
Here is the SQL:
-------------------------------------------
DECLARE @cReportGroups Varchar(500)DECLARE @StartDateRange DateTime
DECLARE @EndDateRange DateTime
SET @cReportGroups = '''VCCEddieBauer'',''VCCEddieBauerDirect'', ''VCCEddieBauerOrder'', ''VCCEddieBauerOvernight'', ''VCCEddieBauerSpanish'', ''VCCEddieBauerCustomerService'''
SET @StartDateRange = '09-16-2007'
SET @EndDateRange = '01-31-2008'
BEGIN
Declare @sql As Varchar(800)
Set @sql = 'SELECT ttalkacd, cName, dIntervalStart, cReportGroup' +
' FROM IAgentQueueStats ' +' WHERE dIntervalStart >= ' + @StartDateRange
---- ' AND dIntervalStart <= ' + EndDateRange +
---- ' AND cReportGroup IN (' + @cReportGroups + ')' +
---- ' AND cHKey3 = ''*''' +
-- ' ORDER BY dIntervalStart' --+
---- ' COMPUTE SUM(ttalkacd)'
--Print(@sql)
exec (@sql)
END
-----------------------------------------------
Just trying to get the first >= filter working before I fill in the >= working to complete the date range logic.
But I keep getting this conversion error.
Why does SQL think that anything is a character string?All dates are declared as DateTime.I have tried a bunch of combinations like Convert(DateTime, @StartDateRange, 101).Nothing seems to work.
Here's the deal. I'm a newbie trying to update a date (@Effective) in sql server. I've been trying all sorts of things, but nothing seems to work. Here's my current code:
Sub btnUpdate_Click(sender As Object, e As EventArgs)
Dim sqlStmt As String
Dim conString As String
Dim cn As SqlConnection
Dim cmd As SqlCommand
Dim sqldatenull As SqlDateTime
Try
sqlStmt = "UPDATE [Submission] SET [Effective]=Convert(DateTime, '@Effective', 101), "& _
"[Status]=@Status WHERE ([Submission].[Submission]=@Submission)"
conString = "server='(local)'; user id='sa'; password='password'; database='database'"
cn = New SqlConnection(conString)
cmd = New SqlCommand(sqlStmt, cn)
cmd.Parameters.Add(New SqlParameter("@Submission", SqlDbType.Int, 4))
cmd.Parameters.Add(New SqlParameter("@Effective", SqlDbType.VarChar, 10))
cmd.Parameters.Add(New SqlParameter("@Status", SqlDbType.VarChar, 8))
sqldatenull = SqlDateTime.Null
If (txtEffective.Text = "") Then
cmd.Parameters("@Effective").Value = sqldatenull
Else
cmd.Parameters("@Effective").Value = txtEffective.Text
End If
cmd.Parameters("@Status").Value = dropStatus.SelectedItem.Text
cmd.Parameters("@Submission").Value = LabelSubmission.Text
cn.Open()
cmd.ExecuteNonQuery()
cn.Close()
Response.Redirect("main.aspx")
Catch ex As Exception
lblError.Text = ex.Message
Finally
cn.Close()
End Try
End Sub
My db is setup as follows:
Submissionint4
Insuredvarchar30
Statevarchar2
Effective datetime 8
Underwritervarchar9
Statusvarchar8
Cleareddatetime 9
I'm losing my hair by the fist full... Somebody please stop the insanity!
Somewhere, either in the
aspx.vb code, or the stored procedure that's being called, it doesn't
like my code since I am getting the dreaded "syntax error converting
datetime from character string" error. I've been battling this
for two days - can someone spot what is wrong here?
The dtWdate variable is coming from a calendar control on my aspx page.
Please help - I've tried every conceivable way I can think to do this without success.
Lynnette
Here's the code:
Private Sub GetFLSAEmpInfoRecs()
'uses the AppSettings table to generate WHERE clause from the filter values
Dim dtWdate As DateTime = Calendar1.SelectedDate
Dim wValue As String = Session("svFilterValue")
Dim cnn As New SqlConnection(constants.SQLConStrFLSA)
Dim cmd As New SqlCommand("usp_AddFLSA", cnn)
cmd.CommandType = CommandType.StoredProcedure
cnn.Open()
cmd.Parameters.Add(New
SqlParameter("@dtWDate", SqlDbType.DateTime)).Value =
Convert.ToDateTime(dtWdate)
cmd.Parameters.Add(New
SqlParameter("@whereString", SqlDbType.VarChar, 500)).Value = wValue
cmd.ExecuteNonQuery()
cnn.Close()
End Sub
And here is the stored procedure:
ALTER PROC usp_AddFLSA
@dtWdate datetime,
@whereString as varchar(255)
AS
DECLARE @strSQL as varchar(2000)
SET @strSQL =
'
INSERT INTO FLSAEmpInfo
( Emp_Number,
PT_ID,
Emp_Division,
Emp_DeptInfo,
Emp_Supervisor,
Emp_Location,
Emp_Union,
Emp_SG,
Emp_Shift,
WrkDate
)
SELECT
hcsoSharedTables.dbo.Employee2.Emp_Number,
hcsoSharedTables.dbo.Employee2.[ID],
hcsoSharedTables.dbo.Employee2.Division,
dbo.udf_getDeptInfo(hcsoSharedTables.dbo.employee2.Department,hcsosharedtables.dbo.employee2.Dept_Mgr,hcsosharedtables.dbo.employee2.job_dept_code),
hcsoSharedTables.dbo.Employee2.Job_Supervisor,
hcsoSharedTables.dbo.Employee2.Loc_Name,
hcsoSharedTables.dbo.Employee2.[Union],
hcsoSharedTables.dbo.Employee2.Sched_Group,
hcsoSharedTables.dbo.Employee2.Shift,' +
@dtWdate + ' ' + 'FROM hcsoSharedTables.dbo.Employee2' + @whereString
EXEC(@strSQL)
Hi all, The last week this was working, and today i was testing and all start with errors. This is my SQL sentence:command = New SqlCommand("update ctlg_users set u_last_access = '" & FormatDateTime(Now(), 1) & "' where u_id = " & cstr(l_u_id),oConn)Is there an error? why was before working and now don`t?, including an old ASP page that i´m still using fall back to the same error when is using FormatDateTime, í´ve tried in the ASPX page using datetime.now.tostring("dd/mm/yyyy") but i got an error too!! HEEEELP!Thanks :D
View 2 Replies View RelatedHi,
I'm having a strange problem with the following stored proc:
Code:
sql
declare @orderBy tinyint
set @orderBy = 2
SELECT tblUsers.userID, firstName, lastName, dateRegistered, count(movieSessionID) As sessionsCount FROM tblUsers
LEFT JOIN tblMovieSessions on tblUsers.userID = tblmovieSessions.userID
Group By tblUsers.userID, firstName, lastName, dateRegistered
Order By Case
WHEN @orderBy = 2 THEN firstName
WHEN @orderBy = 3 THEN dateRegistered
WHEN @orderBy = 4 THEN count(movieSessionID)
else lastName
End desc
When I execute it with @orderBy = 1 or 2 I get the following error message: Quote: Server: Msg 241, Level 16, State 1, Line 5
Syntax error converting datetime from character string.
However, with @orderBy = 3 or 4 it executes successfully.
I don't understand why this change should have this impact because the error seems to be occuring on the first line (i.e. SELECT...).
If I take the dateRegistered column out of the query I get a new error message:
Quote:
Server: Msg 245, Level 16, State 1, Line 5
Syntax error converting the nvarchar value 'Adam' to a column of data type int.
I don't understand why it is trying to convert these columns during the query anyway, let alone how to solve the problem.
Anyone got any ideas?
I am using INSERT to replace about 160 fields for one company in the company table, all goes well until I come to the Rn_edit_date field which is a datetime datatype. When I insert the value of:
cast('2005-03-15 09:25:44.463' as datetime)
Error message as a result is: Syntax error converting datetime from character string.
NOTE: 2005-03-15 09:25:44.463 is the correct format which all other companies abide by, so I'm totally lost at where I'm going wrong?
Any help would be appreciated
I am having a problem on running the following queiry
select * from my_table where unitclass_id=247
and Year(cast (column1 as datetime))=Year(dateadd(wk,0,getdate()) )
column1 type nvarchar(10) and stores date in format like 2007-06-22.
I am trying to select all records for the current year from my_table and getting an error
when running that queiry
Syntax error converting datetime from character string.
Please help
Thank you
I have a field that has dates that are currently set as a string. Dates are as follows:
Apr 01 2006
Aug 20 2006
Aug 20 2006
I did an isdate() function on the field to see if it can be converted and it came back as true; however, I have attempted several different ways to convert the field to a date field and it continues to give me a syntax error. Any assistance would be great!!!
I tried:
convert(datetime,cast(New_Date as varchar),100)
convert(varchar(25),New_Date,107)
Both gave me syntax errors.
When I convert this data into a datetime, i get the foll error.
Syntax error converting datetime from character string.
SELECT convert(datetime,'09/2007')
Basically I have a field in a tbl that has varchar datatype, and is in this format of mm-yyyy. I need to compare this value to current date and so I convert it to datetime. but it errs
Pl help
Good Morning:
I received the above error message when I try to convert a field to a date.
Here is the line of sql:
convert(datetime, cast(EligibilityEndDate as char(8)), 112) as EligibilityEndDate,
EligibilityEndDate is stored as an integer in our source system, so dates display 20080201.
Looks like the data is not a correct date.
If I just bring in the field as is, and load results into a text file or Access, I can't see the offending record.
The query returns around 320K records.
Is there another way of finding the invalid record(s)?
Any help appreciated.
Thanks.
Mike
I have a 6 char field which has to be converted to a datetime. I thought I had it solved when I did this
convert(datetime,(left(dob,2)+'-'+substring(dob,3,2)+'-'+right(dob,2)))
Problem is with a date value of 081649
I get 08/16/2049 instead of 1949, where did I goof
Hi,
I am trying to insert an entry into my database, but I keep on getting the following error: "Conversion failed when converting datetime from character string." My query is a parameterized T-SQL query (i.e. "INSERT INTO blah (name, dob) VALUES (@name, '@dob')"), and I have initialized the SqlCommand object by doing: sqlCmd.Parameters.AddWithValue("@name", "Captain America");
sqlCmd.Parameters.AddWithValue("@dob", birthdate.ToString("MM/dd/yyyy h:mm tt");
sqlCon.Open();
sqlCmd.ExecuteNonQuery();
sqlCon.Close();
The dob field in the table 'blah' is a smalldatetime datatype, and in the code above, the birthdate object is a DateTime object.
I can insert into my database using a normal T-SQL through Management Studio,
For example, INSERT INTO blah (name, dob) VALUES ('Captain America', '11/27/1923 12:34 PM')
But it doesn't work when I try doing it the way I have listed above. It's really annoying because I don't know how to debug or if it is possible to debug the query. So first off, I want to ask, does anyone know how why this exception is occuring? Secondly, is it possible to debug the query? and if yes, how? And finally, is there a way for me to extract the T-SQL query sent to the SQL Server with the parameters filled in their values? For example, after adding all parameters to the SqlCommand via sqlCmd.Parameters.AddWithValue(), can I get the T-SQL query that is sent to the server?
CREATE PROCEDURE dbo.Synchronization_GetNewRecords(@item varchar(50),@last datetime)ASSET NOCOUNT ONDECLARE @sql nvarchar(4000)SET @sql = 'SELECT * FROM ' + @item + ' WHERE LastUpdated >' + @lastEXEC sp_executesql @sql, N'@Type varchar(50), @Last datetime', @item, @lastThis is my SP. Very simple. But it is throwing the error in the subject line.Any help would be greatly appreciated.
View 1 Replies View RelatedI have written the following query to extract data splitting a text string into separate fields. This query works fine and returns results.
WITH a (company_id, user_id, project_id, customer_id, action, importdate, groupid, accountnumber, amount, notes, created, updated) AS
(
select
company_id,
user_id,
project_id,
customer_id,
action,
CAST(SUBSTRING(params, PATINDEX('%[ImportDate=%', params)+13, 19) AS datetime) AS ImportDate,
SUBSTRING(params, PATINDEX('%GroupID=%', params)+8, 1) AS GroupID,
SUBSTRING(params, PATINDEX('%AccountNo=%', params)+10, 7) AS AccountNumber,
CAST(SUBSTRING(substring(params, 0, len(params)), PATINDEX('%Amount=%', params)+7, 10) AS decimal(18,2)) AS Amount,
notes,
created,
updated
from
database.dbo.tablename
where
customer_id is not null and
PATINDEX('%GroupID=%', params) <> 0 and
PATINDEX('%ImportDate=%', params) <> 0 and
PATINDEX('%AccountNo=%', params) <> 0 and
PATINDEX('%Amount=%', params) <> 0
)
select
company_id,
user_id,
project_id,
customer_id,
action,
importdate,
DATEPART(year, importdate) AS importyear,
DATEPART(month, importdate) AS importmonth,
groupid,
accountnumber,
amount,
notes,
created,
updated
from
a
The problem arises when I try to do a WHERE on either the importyear or importmonth field.
WITH a (company_id, user_id, project_id, customer_id, action, importdate, groupid, accountnumber, amount, notes, created, updated) AS
(
select
company_id,
user_id,
project_id,
customer_id,
action,
CAST(SUBSTRING(params, PATINDEX('%[ImportDate=%', params)+13, 19) AS datetime) AS ImportDate,
SUBSTRING(params, PATINDEX('%GroupID=%', params)+8, 1) AS GroupID,
SUBSTRING(params, PATINDEX('%AccountNo=%', params)+10, 7) AS AccountNumber,
CAST(SUBSTRING(substring(params, 0, len(params)), PATINDEX('%Amount=%', params)+7, 10) AS decimal(18,2)) AS Amount,
notes,
created,
updated
from
database.dbo.tablename
where
customer_id is not null and
PATINDEX('%GroupID=%', params) <> 0 and
PATINDEX('%ImportDate=%', params) <> 0 and
PATINDEX('%AccountNo=%', params) <> 0 and
PATINDEX('%Amount=%', params) <> 0
)
select
company_id,
user_id,
project_id,
customer_id,
action,
importdate,
DATEPART(year, importdate) AS importyear,
DATEPART(month, importdate) AS importmonth,
groupid,
accountnumber,
amount,
notes,
created,
updated
from
a
where DATEPART(year, importdate) = 2007
I get
Conversion failed when converting datetime from character string.
but when I use ISDATE() to validate the importyear it returns nothing indicating that the actual importdate is a valid date. Can anyone help please?
Thanks
i have a stored proc running against the Northwind DB
Code Snippet
CREATE PROCEDURE CustomPaging
@intOrderID varchar(10),
@strCustomerID varchar(10),
@intEmployeeID int,
@dteOrderDate datetime,
@startRowIndex int,
@maximumRows int,
@SortOrder int
AS
DECLARE @TempItems TABLE
(
ID int IDENTITY,
OrderID int
)
DECLARE @maxRow int
SET @maxRow = (@startRowIndex + @maximumRows) - 1
SET ROWCOUNT @maxRow
INSERT INTO @TempItems (OrderID)
SELECT OrderID
FROM Orders o
INNER JOIN Customers c ON c.CustomerID = o.CustomerID
INNER JOIN Employees e ON e.EmployeeID = o.EmployeeID
ORDER BY CASE @SortOrder WHEN 0 THEN OrderID
WHEN 1 THEN c.CompanyName
WHEN 2 THEN e.FirstName
WHEN 3 THEN o.OrderDate
WHEN 4 THEN o.RequiredDate
WHEN 5 THEN o.ShippedDate END
SET ROWCOUNT @maximumRows
SELECT o.OrderID, CompanyName, e.FirstName + ' ' + e.LastName EmployeeName, o.OrderDate, o.RequiredDate, o.ShippedDate
FROM @TempItems t
INNER JOIN Orders o ON o.OrderID = t.OrderID
INNER JOIN Customers c ON c.CustomerID = o.CustomerID
INNER JOIN Employees e ON e.EmployeeID = o.EmployeeID
WHERE
t.[ID] >= @startRowIndex
AND
(o.OrderID LIKE @intOrderID OR @intOrderID = '')
AND
(o.CustomerID = @strCustomerID OR @strCustomerID='')
AND
(o.EmployeeID = @intEmployeeID OR @intEmployeeID = 0)
AND
(o.OrderDate = @dteOrderDate OR @dteOrderDate IS NULL)
SET ROWCOUNT 0
GO
when i execute the sp with @sortOrder = 0, it works fine
exec CustomPaging '','',0,null, 1, 10, 0
but if i try anything else (@SortOrder=1) i get the error message
exec CustomPaging '','',0,null, 1, 10, 1
Syntax error converting datetime from character string.
but im unsure what is causing this problem? and how to sort it?
Any help is greatly appreciated.
Cheers.
Craig
I need to take a temporary table that has various times stored in a text field (4:30 pm, 11:00 am, 5:30 pm, etc.), convert it to miltary time then cast it as an integer with an update statement kind of like:
Update myTable set MovieTime = REPLACE(CONVERT(CHAR(5),GETDATE(),108), ':', '')
how this can be done while my temp table is in session?
I am newbie in asp and sql, and I am using VS & SQL expresswhen I try to submit I get following error"Conversion failed when converting character string to smalldatetime data type"Following is my insert statement<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:oncallConnectionString %>"SelectCommand="SELECT data.* FROM data" InsertCommand="INSERT INTO data(Apps, Location, Impact, System, Date, Start_Time, End_Time, Duration, Problem, Cause, Solution, Case, Comments) VALUES ('@DropDownList1','@DropDownList2','@DropDownList3','@TextBox6','@DropDownCalendar1','@DropDownCalendar2','@DropDownCalendar3','@TextBox1','@TextBox2','@TextBox3','@TextBox4','@TextBox5','@TextBox7')"></asp:SqlDataSource>These are @DropDownCalendar1','@DropDownCalendar2','@DropDownCalendar3' defined as datetime in database.I would appriciate if somebody could help.
View 7 Replies View Related