A table has a column containing values "Y", "N", and some blanks.
I'm trying to write a single SELECT statement applied for that column that displays the word "Yes" instead of "Y" (in the table itself) and the word "No" instead of "N".
Can't figure it out. Any ideas appreciated.
Thanks,
barkingdog
I have 3 tables, with this relation:
tblChats.WebsiteID = tblWebsite.ID
tblWebsite.AccountID = tblAccount.ID
I need to delete rows within tblChats where tblChats.StartTime - GETDATE() < 180 and where they are apart of @AccountID. I have this select statement that works fine, but I am having trouble converting it to a delete statement:
SELECT * FROM tblChats c
LEFT JOIN tblWebsites sites ON sites.ID = c.WebsiteID
LEFT JOIN tblAccounts accounts on accounts.ID = sites.AccountID
WHERE accounts.ID = 16 AND GETDATE() - c.StartTime > 180
I have the following query:
(SELECT MIN(CFGDates.AccountPdEnd)
FROM CFGDates LEFT JOIN
AR ON AR.Period = CFGDates.Period
WHERE AR.Period = '200408')
I need to convert this into a case statement.
I tried various ways but did not get the result that I was after
Thanks,
Laura
I have a datetime format that comes in 'yyyy-mm-dd hh:mm:ss.nnn'
But I only want 'yyyy-mm'
I am not sure how to correctly write the select statements. Below is what I have..
How would I do this, so the datetime result is 'mmmm-yy' ....
SELECT
[RecordingDate],
[RecordedUserID],
[CombindedPercentieScore]
FROM [dbo].[scoringsummary]
WHERE convert(varchar(7), [RecordingDate],120) between convert(varchar(7), DateAdd(dd,-180,GetDate()), 120) AND convert(varchar(7), DateAdd(dd,-1,GetDate()), 120)
I have trouble converting a text field into decimals in a select statement.
The select statement is as follows:
select cast(ltrim(rtrim(units)) as decimal) as units
and I get an error message:
Msg 8114, Level 16, State 5, Line 23
Error converting data type nvarchar to numeric.
and the 'units' column contains ' 324,32 '
Trying to convert the following SELECT statement into a INSERT statement and having trouble. No doubt this will be a piece of cake to someone. To eventually get this to a trigger stage would be nice, but for the moment I'd settle for just plain SQL. Using MS SQL 2000. The database name is reporting. The table name is CallLog. I'm trying to convert seperate date (RecvdDate) and time (RecvdTime) columns into a single DateTime column. I've scoured a lot of web pages but I'm still lost.
==============
use reporting
go
SELECT RecvdDate + RecvdTime FROM [dbo].[CallLog]
===============
Any help much appreciated.
Hello... im having a problem with my query optimization....
I have a query that looks like this:
SELECT * FROM table1
WHERE location_id IN (SELECT location_id from location_table WHERE account_id = 998)
it produces my desired data but it takes 3 minutes to run the query... is there any way to make this faster?... thank you so much...
I have a case statement which I need to alter in my query. The field [sr.spec_value] contains either 1 or 0. When it is 1 I want the case expression to return 'YES' when 0 then 'NO'. I've tried a couple of options from the forum but am not getting it right. Here is the original case statement from my query:
case when sr.spec_value = 1 then 'YES' when 0 then 'NO' end [Fixed].
I have a query where I need to see in 2 seperate columns, the Actual date of deliveries and collections, and the Invoice Week number of the same. The problem is that in our ERP system delivery date (di.ddate) is a date field, and the collection date is nvarchar. This is my query and sample results below, as you can see I'm getting nulls for the collection lines. How can I do this efficiently
select di.dticket, di.item,
case di.item when 'DEL' then di.ddate when 'COL' then CONVERT(datetime,di.text2,103) end ActDate,
Case when di.item = 'DEL' then
(select YearWeek from MCSReports.RptRevenueGuideWeekLookup
where di.ddate between FromDate and ToDate) end InvWeek
from deltickitem di
where item in ('DEL','COL')
Sample results below:
dticket item ActDate InvWeek
-------------------- -------------------------------------------------- ----------------------- --------
01-000002 DEL 2011-07-05 15:53:00.000 2011-27
01-000002 COL NULL NULL
01-000004 DEL 2011-07-05 16:04:00.000 2011-27
01-000004 COL NULL NULL
01-000005 DEL 2011-07-05 16:08:00.000 2011-27
01-000005 COL NULL NULL
01-000006 DEL 2011-07-05 16:19:00.000 2011-27
01-000006 COL NULL NULL
01-000007 DEL 2011-07-05 16:24:00.000 2011-27
01-000007 COL NULL NULL
01-000008 DEL 2011-07-05 16:29:00.000 2011-27
01-000021 DEL 2011-07-05 08:48:00.000 2011-27
Hello.
I have data in a SSIS package that I need to alter to something else.
The source column is a VARCHAR(3) column and it only contains two possible values, "ACT" or "CLS".
The destination column is a CHAR(1) column. Where the value of the source column is 'ACT' I want to put '1' in the destination and where the value of the source column is 'CLS' I want to put '0'.
I can do this easily in T-SQL using a CASE statement but the source data is an Ingres database and CASE isn't a valid SQL keyword.
Can I use a data conversion task to do this in SSIS? and if so, what's the syntax?
Thanks
I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
View 5 Replies View RelatedOk I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if
View 2 Replies View RelatedHi guys,
I have the query below (running okay):
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
FROM myTables
WHERE Conditions are true
ORDER BY Field01
The results are just as I need:
Field01 Field02
------------- ----------------------
192473 8461760
192474 22810
Because other reasons. I need to modify that query to:
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
INTO AuxiliaryTable
FROM myTables
WHERE Conditions are true
ORDER BY Field01
SELECT DISTINCT [Field02] FROM AuxTable
The the results are:
Field02
----------------------
22810
8461760
And what I need is (without showing any other field):
Field02
----------------------
8461760
22810
Is there any good suggestion?
Thanks in advance for any help,
Aldo.
I have a stored procedure in which we are deriving some flags. So, we used series of CASE statements.
For examples
CASE
WHEN LEFT(CommissionerCode, 3) IN ('ABC','DEF',...) THEN 1
WHEN PracticeCode IN (.......) THEN 1
WHEN (CommissionerCode IN (.....) OR PracticeCode NOT IN (.....) OR .....) THEN 1
ELSE 0
END
I need to put these conditions in config table and generate dynamic sql. What is the best way to do this? especially, 3rd condition with OR logic with multiple columns involved.
Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E
can any one help me in this?
please give me a sample query.
Thanks and Regards,
Kiran Suthar
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
UPDATE TABLE1
SET TABLE1.FIELD2 = 1
ELSE
UPDATE TABLE2
SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
I have a stored procedure in which we are deriving some flags. So, we used series of CASE statements.
For examples
CASE
WHEN LEFT(CommissionerCode, 3) IN ('ABC','DEF',...) THEN 1
WHEN PracticeCode IN (.......) THEN 1
WHEN (CommissionerCode IN (.....) OR PracticeCode NOT IN (.....) OR .....) THEN 1
ELSE 0
END
I need to put these conditions in config table and generate dynamic sql.
What is the best way to do this? especially, 3rd condition with OR logic with multiple columns involved.
Hi, I was handed an old application written for sql05, it has this (kind of) statement:
Dim CommandText As String = "SELECT c.name FROM db1 c LEFT JOIN "
CommandText += "db2.dbo.Users u ON u.iKey = c.key "
CommandText += "WHERE u.cUserName = '" & User & "'"
As you can see, there are two databases, db1 and db2 and this worked fine in sql05, but when I convert each of the databases to sqlexpress, I get this error: Invalid object name 'db2.dbo.Users'.
So how can I make this work in sqlexpress? Are queries across databases not allowed?
Thanks so much for your help!
This one isn't so simple.I have a list of training modules, training complete dates and a list of employees in separate tables. I'll give an good example in a second. The problem I am having is that I need to generate a select statement that will generate a kind of 'spreadsheet' that will list the employees in the rows, and columns containing the results in the fields (the training module may or may not have been completed, and thus may or may not be in the result box. I think the example explains it fairly well (note, I did not design the database structure but have to work with it).Employees table:empNameJane DoeAlton BrownJohn DoeTrainingCourse table:courseNameWeldingBrain SurgeryScuba DivingResults table:empName: courseName: completeDate:Jane Doe Welding 2/2/2002Jane Doe Brain Surgery 3/7/2005Alton Brown Scuba Diving 9/23/2004Alton Brown Welding 11/4/2004John Doe Brain Surgery 6/14/2003End result of select statement: Welding Brain Surgery Scuba DivingJane Doe 2/2/2002 3/7/2005 Alton Brown 11/4/2004 9/23/2004John Doe 6/14/2003 Thanks a million to anyone with insight into this. I'm still trying to figure out a way to do this, but after a few days haven't come up with or found anything. Most things I've found online are too simplistic.
View 8 Replies View RelatedIn the below code i want to use select statement for getting customer
address1,customeraddress2,customerphone,customercity,customerstate,customercountry,customerfirstname,customerlastname
from customer table.Rest of the things will be as it is in the following code.How do i do this?
INSERT INTO EMImportListing ("
sql += " CustId,Title,Description,JobCity,JobState,JobPostalCode,JobCountry,URL,Requirements, "
sql += " IsDraft,IsFeatured,IsApproved,"
sql += " Email,OrgName,customerAddress1,customerAddress2,customerCity,customerState,customerPostalCode,
[code]....
I'm looking for some good hints and tips for reprogrammin an old VB module I just found.
Basically what it does, is receive an input parameter (an int), does a select [name row] from Names where Name_id = [input parameter] and turns this into a string if multiplenames appear.
E.g. result set: John, Josh, Jock turns it into string "John Josh Jock".
So its piece of cake creating a stored procedure selecting data on the base of an input parameter. Select X from Y where Z = @input... the trick is, I don't know how to do arrays in TSQL as in VB.
In the VB edition I create an array, load the names into it, I do a count on how many row the select returns and then a simple for... next adding the names to the string.
Any good examples on how to do this in a sql-server stored proc?
Thanks,
Trin
P.S. This is what I have pieced together this far:
CREATE PROCEDURE findnames
@number int
AS
DECLARE @instrument varchar(50)
DECLARE @tempinstt varchar(10)
DECLARE medlemcursor CURSOR
FOR
SELECT [MCPS Kode]
FROM DW.dbo.names(NOLOCK)
WHERE number = @number
OPEN medlemcursor
FETCH NEXT FROM medlemcursor INTO @tempinstt
WHILE (@@FETCH_STATUS <> -1)
BEGIN
SET @instrument = @instrument + @tempinstt + '-'
FETCH NEXT FROM medlemcursor INTO @tempinstt
END
CLOSE medlemcursor
DEALLOCATE medlemcursor
SELECT @instrument
GO
Just doesn't seem to work, returns NULL, even though I've checked that the cursor SELECT statement actually returns data,
Hey guys i have a stock table and a stock type table and what i would like to do is say for every different piece of stock find out how many are available The two tables are like thisstockIDconsumableIDstockAvailableconsumableIDconsumableName So i want to,Select every consumableName in my table and then group all the stock by the consumable ID with some form of total where stockavailable = 1I should then end up with a table like thisEpson T001 - Available 6Epson T002 - Available 0Epson T003 - Available 4If anyone can help me i would be very appreciative. If you want excact table names etc then i can put that here but for now i thought i would ask how you would do it and then give it a go myself.ThanksMatt
View 2 Replies View RelatedSELECT Top 10 Name, Contact AS DCC, DateAdded AS DateTimeFROM NameTaORDER BY DateAdded DESC
I'm trying to right a sql statement for a gridview, I want to see the last ten records added to the to the database. As you know each day someone could add one or two records, how can I write it show the last 10 records entered.
Hello
How can i say this I would like my if statement to say: if what the client types in Form1.Cust is = to the Select Statement which should be running off form1.Cust then show the Cust otherwise INVALID CUSTOMER NUMBER .here is my if statement.
<% If Request.Form("Form1.Cust") = Request.QueryString("RsCustNo") Then%> <%=Request.Params("Cust") %> <% Else %> <p>INVALID CUSTOMER NUMBER</p> <% End If%>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:RsCustNo %>"
ProviderName="<%$ ConnectionStrings:RsCustNo.ProviderName %>" SelectCommand="SELECT [CU_CUST_NUM] FROM [CUSTOMER] WHERE ([CU_CUST_NUM] = ?)">
<SelectParameters>
<asp:FormParameter FormField="Cust" Name="CU_CUST_NUM" Type="String" />
</SelectParameters>
</asp:SqlDataSource>any help would be appreciated
Hi,
I am a newbie to this site and hope someone can help....
I have a select statement which I would like to create an extra column and put an if statement in it.... Current syntax is:
if(TL_flag= '1', "yes") as [Trial Leave]
it is coming up with an error.... I can use Select case but I should not need to as this should work?
Any ideas?
I'm trying to select only July from show_held but I keep on getting the error message saying:
Conversion failed when converting date and/or time from character string.
I get error message after I write this code:
ANDshow.show_held = '&July&'
As you can see from the below code, How do I select July from times_held_in_July?
SELECTevent_name,
DATENAME (MONTH, show_held) AS times_held_in_July
FROMevent,
show
WHEREevent.show_id = show.show_id
Result:
event_name times_held_in_July
DressageJuly
Jumping July
Led in July
Led in September
Led in May
DressageApril
DressageJuly
Flag and PoleJuly
SELECTevent_name,
DATENAME (MONTH, show_held) AS times_held_in_July
FROMevent,
show
WHEREevent.show_id = show.show_id
ANDshow.show_held = '&July&'
Result:
Msg 241, Level 16, State 1, Line 24
Conversion failed when converting date and/or time from character string.
Good day all.
Let's see if I can stump you with this one.....
Code Snippet
SELECT Account.New_DistributorAccountNumber, Account.New_NameonBill, ActivityPointer.Subject, ActivityPointer.CreatedOn AS ExprX
FROM Account INNER JOIN
ActivityPointer ON Account.AccountId = ActivityPointer.RegardingObjectId
UNION
SELECT Account_1.New_DistributorAccountNumber AS Expr1, Account_1.New_NameonBill AS Expr2, ActivityPointer_1.CreatedOn AS Expr19,
ActivityPointer_1.Subject AS Expr20
FROM Account AS Account_1 INNER JOIN
Contact AS Contact_1 ON Account_1.AccountId = Contact_1.AccountId INNER JOIN
ActivityPointer AS ActivityPointer_1 ON Contact_1.ContactId = ActivityPointer_1.RegardingObjectId
gives the error mentioned above. Each select statement, when run separately, works fine. Any clues?
Thank you in advance
I would like to exec a select statement in VB/C++ to return first 100 records? What is the SQL statement should be?
Thanks,
Sam
I am using three tables in this query, one is events_detail, one is events_summary, the third if gifts. The original select statement counted the number of ids (event_details.id_number) that appear per event_name (event_summary.event_name).
Now, I would like to add in another column that counts the number of IDs that gave a gift who attended an event that were also listed in the event_ details table. So far I have come up with the following. My main issue is linking the subquery properly back to the main query. how to count in the sub-query and have the result placed within the groups results in the main query.
SELECT es.event_name, es.event_id, COUNT(ed.id_number) Number_Attendees,
(
SELECT COUNT(gifts.donor_id) AS Count2
FROM gifts
WHERE gifts.donor_id = ed.id_number
) subquery2
[code]....
I need to write a select statement that take the upper table and select the lower table.
View 3 Replies View RelatedSlow loading issue with an if statement. In the raw data the field [Location] is a text field e.g. 0010. I have a parameterised query that get a Location_Value from Excel and passes it to the PQ query using:
#"Filtered Rows1" = Table.SelectRows(#"Removed Other Columns", each ([SalesMode] = 0) and ([SalesType] = 0) and ([Location] = Location_Value))
This works fine if you chose a single location. However I wanted to be able to select all locations and text is horrible to work with so in PQ I used the change type function to change the location column into whole numbers. I changed excel to also pass a number as Location_Value. I was therefore surprised when the same query took 2.5 times longer to refresh????
My PQ now looks like this
#"Changed Type" = Table.TransformColumnTypes(#"Removed Other Columns",{{"Location", Int64.Type}}),
#"Filtered Rows1" = Table.SelectRows(#"Changed Type", each ([SalesMode] = 0) and ([SalesType] = 0) and ([Location] = Location_Value))
I'm wondering if I need to do something to the ([Location] = Location_Value) bit as maybe it still thinks [Loation] is text and it is trying to compare it to a number. I st assumed the step above meant that [Location] was now a number, but maybe you still have wrap it with some kind of VALUES or TEXT function?
Hi All,
Can some one point me in the right direction in how to construct my SQL query within my cursor?
I Have got a cursor which i am using to iterate through a table, What i am trying to do is in my statement(used to open the cursor) is compare 2 tables (the one which my cursor is iterating) to see if there is a matching row in the other table (using both tables ID's Like So:
SELECT column_List
FROM Table1
WHERE Table1_id = Table2_id
so for each row my cursor checks if there is a corresponding match in table2... but i would like to write to an error log
and do other statements if there is no match
how do i add this condition to my statement either using an if...else statement proceeding to the next row?
here is the statment i attempted to write:
SELECT column_List
FROM table1
WHERE
Table1_id = Table2.id
now i want to incoporate the statements below into the statement above as a condition when table1.id <> table2.id
IF table1.id <> table2.id
BEGIN
SET @DebugMessage = 'data not live.'
RAISERROR (@DebugMessage, 16, 1) WITH LOG
END
essentially what i am trying to sayin my statement is:
go to the first row
check if it has a match in table 2,
if there is no match execute a number of statements such as error loging e.t.c
go to the next row
repeat the previous statements
...i also looked through some Case...When statements am just not sure how to put in the condition
thanks in advance